d.t.mux recorder - · pdf filed.t.mux recorder this recorder is used to record and ......

D.T.MUX RecorderThis recorder is used to record and

replay analogical signals like audio and

Irig and numerical signals like PCM.

380 rue de l'Initiative, ZAC des Bousquets

83 390 Cuers (FRANCE)

Phone: 00 334 94 08 50 26

Fax: 00 334 94 08 28 03

Email: [email protected]

www.etep.com

D.T.MUX Recorder

The proposed device is equipped:

• ETEP568 module 4 x primary sync channels for shaping the signals (clock + data) option

• ETEP515 module 4 x PCM channels from 5 kbits / second to 20 Mega bits / second, per channel, 4-channel asynchronous recording and playback. IRIG B channels and voice included (8 channels with 2xETEP515.)

• Removable SATA drive, (capacity: 1TBytes)

• Outside DLTV4 device (USB) option



Phone: 00 334 94 08 50 26

Fax: 00 334 94 08 28 03


www.etep.com

D.T.MUX Recorder

EMC Chassis (CE standard), 19 inches 4U in height

Handful for transport

A front panel fitted with

2 USB sockets for connecting a keyboard and mouse

8-inch flat touch screen allowing to:

� Manipulation and control channels during recording

� Copies files and manipulation at the end of recordings



Phone: 00 334 94 08 50 26

Fax: 00 334 94 08 28 03


www.etep.com

D.T.MUX Recorder



Phone: 00 334 94 08 50 26

Fax: 00 334 94 08 28 03


www.etep.com

A back panel fitted with

The PCI Express primary synchro board and connections

for 4 channels

The PCI Express PCM board and connections for 8 channels

recording and playback PCM (BNC connections)

IN/OUT Phonie

IN/OUT IrigB Time

D.T.MUX Recorder



Phone: 00 334 94 08 50 26

Fax: 00 334 94 08 28 03


www.etep.com

General overview

D.T.MUX Recorder



Phone: 00 334 94 08 50 26

Fax: 00 334 94 08 28 03


www.etep.com

ETEP 568A Board Features, PRIMARY SYNCHRO (Option)

PCM codes NRZ-L/M/S, Biphase -L/M/S

Number of channels 4

Bandwidth on each input 1000 bits/s to 20 Mbits/s (NRZ code)

Input impedance 50 Ohms ou 600 Ohms

Input dynamic +/- 5V

Offset Removed by high pass

Lock range 1%

SNR at 1 MHz 12 dB for a bit error rate of: 10-8

SNR at 125 kHz 10.5 dB for a bit error rate of: 10-8

Format of output data NRZ-L

Format of the output clock 0 or 180°

Change polarity of the clock

(normal or reverse)

D.T.MUX Recorder



Phone: 00 334 94 08 50 26

Fax: 00 334 94 08 28 03


www.etep.com

ETEP 515B Board Features, PCM 4 channels

Number of channels 1 at 4

Programmable use mode Not ranked by short cycle

Flow by recording channel 5-Kbit/s to 20 M bits / second

Acquisition mode External or internal clock

(sample with an internal clock set),

Independently on each channel.

Resolution of the sampling clock ( Fe x 232 ) / 80 MHz

stability 50 ppm.

PCM Error bit rate < 10 -14

Types of recorded signals. NRZ L (Internal sync format), NRZ M, NRZ S.

Levels of possible outputs

Selectable by programming

TTL, RS 422 (asymmetric 5 volts DC) 50 Ohms balanced analog,

+ Or - 4 volts.

On female BNC sockets.

Format change possible:

RZ, NRZ, Bi Phase, DM

0 or 180 °

D.T.MUX Recorder



Phone: 00 334 94 08 50 26

Fax: 00 334 94 08 28 03


www.etep.com

ETEP 515B Voice channel and IRIG B INCLUDED

Voice Channel

Bandwidth: 20 Hz - 3 KHz *

S/N ratio 68 dB

Microphone impedance

(red plug)

High impedance input jack 3.5 mm.

Jack socket or BNC

Headphones impedance

(black plug)

About 200 Ohms, Input jack 3.5 mm or

BNC.

Dating channel

Bandwidth: 20 Hz - 3 Hz * K

S / N ratio 68 dB

IRIG B

Sinus to 1000 Hz, amplitude modulation

1/3- 3 / 3.

Input: Modulation: C to C max 6Volts

800 mVolts C to C min.

Input by BNC

Accuracy of digital files dating from

the IRIG B

± 0,1 milli second.

D.T.MUX Recorder



Phone: 00 334 94 08 50 26

Fax: 00 334 94 08 28 03


www.etep.com

Summary of the general characteristics

Environment

CEI 61000-662 and 61000-6-4

Shock

1.5 G, 11ms on the 6-axis (Operating).

Temperature

in storage - 30 ° to 70 ° C

Operating 5 ° C to 45 ° C

Vibrations

2 Hz to 2000 Hz 0.5 g acceleration in

transport

Humidity

in storage 10% to 95% noncondensing

Operating 20 to 90% non condensing disk

(without DLT V4)

Position of use

± 45 °

Pressure

900 to 1100 mbar operating

Supply

110V to 240 volts AC 50 Hz to 60 Hz

Power consumption: about 120 Watts

Dimensions

4U height (177 mm), width 450 mm depth 300

mm.

Transportable handle.

Weight:

About 12.5 Kg

MTBF

30 000 hours.

D.T.MUX Recorder



Phone: 00 334 94 08 50 26

Fax: 00 334 94 08 28 03


www.etep.com

Other version available

6U 19’’ or 4U 19’’

D.T.MUX Recorder



Phone: 00 334 94 08 50 26

Fax: 00 334 94 08 28 03


www.etep.com

Software LABD.TMUX

Recorder setting

The user must set the parameters of

the used channels in input for the

recording and in output for the

playing.

After pressing the “DTMUX settings” button, the following

window appears :

Configuration

validation button

Configuration

summary

Configuration

managment menu

Present cards list

to select

D.T.MUX Recorder



Phone: 00 334 94 08 50 26

Fax: 00 334 94 08 28 03


www.etep.com

Software LABD.TMUX

ETEP515A Configuration

Irig+Phonie 4x PCM

The user can select and

configure each channel

independently.

This part of card allows the

recording or playing of 4

PCM channels with

external clock or internal

clock.

For each channel, the user can select the following parameters :

Output type : Analog, TTL

50 Ohms, RS422.

Input type : Analog,

TTL, TTL 50 Ohms,

RS422

Ouput coding :

NRZ_L, NRZ-M, NRZ-S,

BiphasisL, Biphasis-M, NRZ-

L, DMM.

(ref. IRIG 106-96).

Input coding : NRZ_L.

(ref. IRIG 106-96)

Input edge :

Programming of the

clock edge to record

the data.

Rising edge or falling

edge

Output edge :

Programming of the clock

edge to play the data.

Rising edge or falling edge

Input clock type :

External or internal.

Bits frequency :

Frequency of the PCM

clock during the

recording.

D.T.MUX Recorder



Phone: 00 334 94 08 50 26

Fax: 00 334 94 08 28 03


www.etep.com

Software LABD.TMUX

ETEP568A Configuration

bit synchronizer 4 channels

This card allows the user to

manage 4 bit synchronizer

channels.

Each channel have a DATA

input, a DATA output and a

CLOCK output.


Input Bessel filter :

ON (HF rejection) or not.

Central frequency :

1KHz to 20MHz ( NRZ

code)

Input gain :

According to the nature

of the signal, the user can

ajust a gain factor :

½, 1, 2, 4 to reach a range

around 4V peak To peak

Input charge :

50 Ohms or 600 Ohms

Input PCM coding :

NRZ-L or BIPHase_LRandomized PCM

decoding : ON or OFF

Output data polarity :

Normal (same as the

input) or reverse.

Clock edge in output where the

data is stable :

Rising or falling

D.T.MUX Recorder



Phone: 00 334 94 08 50 26

Fax: 00 334 94 08 28 03


www.etep.com

Software LABD.TMUX

Remote control

This software has a user

interface to control the

cards.

In the main menu of

LABD.TMUX, the user must

click the “DTMUX Remote

control » button to access

to the following window :


Input Bessel filter :

ON (HF rejection) or not.

Control buttons

PCMS warning (bargraphs + value in KHz)

that represents the input in case of RECORD

and the output in case of PLAY

Button to select the

file for replay

Selection of the

storage directory and

the record name

IRIG-B decoding warning

Synchro bit warning (If

the board is present)

Button setting:

to call the current

configuration.

D.T.MUX Recorder



Phone: 00 334 94 08 50 26

Fax: 00 334 94 08 28 03


www.etep.com

Software LABD.TMUX

Locate button

Action :

Positionning by MBytes in

the selected file.

or

Positionning by time in the

selected file.

or

Positionning by event in

the selected file.


Event locating

Time locating

By Day , Hour ,

Minute and

second

Mbytes

locating:

d.t.mux recorder - · pdf filed.t.mux recorder this recorder is used to record and ......

Documents