dt2lrj12 land rover dvbt - xtremecaraudio...land rover freelander 2013> land rover range 2014>...

References: User and Installation Manual v.4.3

LAND ROVER DVBT For RR Touch Screens > 2012 Compatible with all LAND ROVER cars with 8,2” Touch Screens > 2012

Radio o Navigation Systems

Supported:

RR EVOQUE Touch Screen 2012 > Touch Screen 8,2” without Navigation System Touch Screen 8,2” with Navigation Premium

Compatible Cars: Range Rover EVOQUE 2012> Range Rover SPORT 2012> Land Rover DISCOVERY 4 2012> Land Rover FREELANDER 2013> Land Rover RANGE 2014>

DT2LRJ12 SW: 1.0.1P

STAGEMOTION, S.L. C/ Los Orfebres, Nº10 (Parcela 129) - Polígono Industrial San Antolín - 34004 - Palencia (Spain) C.I.F.: ES-B47584982 Tel.: +(34) 979 113 200 – Fax: +(34) 979 115 666 - www.stagemotion.com - [email protected]

LAND ROVER DVBT TOUCH SCREEN > 2012 Plug & Play Connection (DT2LRJ12) – EVOQUE / SPORT/ D4

Pa

ge

2

BASIC USE AND MAIN FUNCTIONS 3

General Information 3

Features of DVBT 3

Safety and Security Information 4

About Security 4

Placing the Interface 4

Tech. Specifications 4

Warranty and Updates 5

INTRODUCTION 5

Legal Information 5

Prior to installation 5

Delivery contents 5

CHECK COMPATIBILITY OF VEHICLE AND ACCESSORIES 6

1

Setting the dip switches of the CAN-box TV-500 6

Setting the dip switches of the tuner-box DT2C-M717 6

LED‘s of the tuner-box DT2C-M717 6

CONNECTION SCHEMA 7

INSTALLATION 9

Interconnecting tuner-box, CAN-box and harnesses 9

Connections to the factory monitor 9

Antennas and IR-remote control set 10

USB-AV-Player 11

Connecting peripheral devices 11 After-market rear-seat-entertainment 12 Conax converter 13 After-market rear-view camera 13

OPERATION 14

Activation of the video-in-motion function 14

Selecting the dvbLOGiC as current AV-source 14

Control of the internal DVB-T tuner 14 Channel search 14 Channel list 15 Switching the channels by steering-wheel 15 Selecting favourites 16 EPG 16 Teletext 16

Control of the internal USB AV-player 16


Pa

ge

3

Basic Use and Main Functions

General Information

Congratulations, you have acquired the new dvbt Tuner for Land Rover cars with 8,2” touch screen. This DVBT leaves to you to get the TV function like OEM from factory, and seing the video in movement. It will also allow connecting a rear view camera, without interfering in any case where the signal speed or revolutions navigation equipment used for precise operation. First, note that the installation of this interface can only be performed on vehicles that use a 12V battery. In particular take special care in vehicles such as 4x4, diesel trucks or commercial vehicles, which typically use 24V batteries. In this type of vehicle is not possible to use this interface, although the vehicles incorporated supported by a 12V battery which does not have this problem. Ensure that any relevant device for the safety of the vehicle has been damaged during installation and that all the warning lights of his instrument as well. Ensure you have removed the ignition key for safety, you should remove the battery terminal to protect electronic equipment during installation. This type of interface is designed for use in vehicles referred to in this document, also using the connections shown. Stagemotion, SL not assume any responsibility for the misuse or incorrect installation interface, and the damage they could do to other teams in the vehicle. Please note that this device uses and processes the output shown in the MOST or CAN data bus of the vehicle. If the vehicle manufacturer specifications changes both the instrument panel and navigation systems, or who carry out firmware updates on the Navigator or Instrument Panel, the interface may stop working properly, failure is not covered by the guarantee to be due to external agents at the same interface. If the manufacturer of your vehicle is not in accordance with the installation of this interface based on warranty, Stagemotion, SL assumes no warranty of the equipment in their vehicles, so check the conditions of your warranty before installing. The manufacturer reserves the right to change the device specifications without notice.

Warning: In many countries, traffic rules do not allow the driver to display screens with videos, TV or Internet access on the move and while driving, as it can cause distraction and therefore a hazard to occupants or other road users. The driver is responsible for damage to persons or property that may cause the misuse of this interface. Stagemotion, SL assume no responsibility for improper use.

Features of DVBT

• Plug and Play wires for an automatic connection • Automatic TV Free activation. If the car install from factory OEM Navigation system, also you will be

able to see the TV free of the original DVD Player and USB Port although not available dual screen VIEW in the car.

• Touch control of DVBT functions. Original OEM Screen OSD Menus, Original Cluster TV information • TV Free function for TV, USB and DVD • Connax connection for PPV • 1 Audio Video Output (Oudio Output by the OEM AUX input of the RR original radio system) • 1 Video input special designed for Aftermarket Rear Camera. The rear camera view is activated in

all Radio Levels. • 100% compatible with all OEM SYSTEMS and FUNCTIONS • 100% compatible with touch 8,2” screens and also with Original Navigation Premium.

Warning: The TV Free function is 100% compatible with the navigation function, so that while you are viewing video or image on-road navigation option will remain ON if you have an original navigation system



Pa

ge

4

Safety and Security Information

Please read these instructions before using the equipment and keep them for future reference.

• Read this manual thoroughly and carefully before operating the interface. • Keep this manual handy as a reference point for use and to safely operate the equipment. • Pay special attention to safety warnings in this manual • Do not allow other users to operate the equipment without having read the instructions. • Do not block air vents or equipment to operate at the right temperature and properly dissipate the

heat generated by avoiding overheating. • Pay special attention to driving and obey traffic rules. If the operation of the system difficult to focus

on driving, park your vehicle and make the necessary adjustments. • Do not place other objects on or below this block the ventilation equipment. • Do not place the computer near liquids because if liquids are spilled they can be shorted. • Remember that in the normal use of this equipment engine must be started to prevent battery drain.

About Security

If the kit does not work properly, having worked flawlessly, unplug it for safety and contact the service. If you spill liquid or a solid element within the computer, unplug the interface and contact your service representative before connecting again.

Placing the Interface

Do not place the equipment or antennas on points which could hinder the driver's view or at points where it could interfere with the correct operation of other vehicle systems such as Air Bags or lighting systems. Neither team put points on the driver that makes it difficult to handle other devices of the vehicle. The location of the

interface logic is behind the touchscreen unit.

Tech. Specifications

Operation voltage 10.5 – 14.8V DC Stand-by power drain <1mA Operation power drain ~500mA Power consumption ~7 W Temperature range -30°C to +80°C Weight 333g Measurements (box only) B x H x T 140 x 30 x 105 mm


Pa

ge

5

Warranty and Updates

The Kit is covered by a two year warranty against malfunctions. However subsequent updates to the software of the vehicle, could cause a malfunction of the interface, which is not covered under warranty. Should you require warranty service should contact during office hours with StageMotion at the following address: StageMotion, S.L. C/. Los Orfebres, 10 Pol. Ind. San Antolín, P129 34004 – Palencia España Telf: +34 979 113 200 Fax + 34 979 115 666 Or by email: [email protected] More information www.stagemotion.com

Introduction

Legal Information

By law, watching moving pictures while driving is prohibited, the driver must not be distracted. We do not accept any liability for material damage or personal injury resulting, directly or indirectly, from installation or operation of this product. This product should only be used while standing or to display fixed menus or rear-view-camera video when the vehicle is moving, for example the MP3 menu for DVD upgrades. Changes/updates of the vehicle’s software can cause malfunctions of the interface. We offer free software-updates for our interfaces for one year after purchase. To receive a free update, the interface must be sent in at own cost. Labor cost for and other expenses involved with the software-updates will not be refunded.

Prior to installation

Read the manual prior to installation. Technical knowledge is necessary for installation. The place of installation must be free of moisture and away from heat sources.

Delivery contents

Take down the SW-version and HW-version of the interface boxes, and store this

manual for support purposes.

Tuner-box

DT2C-M717

HW_____

SW_____

Harness

CAV-AV-6P

Remote control

set

C3-IRSET

USB-extension-

cable

USBC-EXT

Harness

DT2C-LR02

CAN-box

TV-500

HW_____

SW_____



Pa

ge

6

Check compatibility of vehicle and accessories

Setting the dip switches of the CAN-box TV-500

Vehicle/ navigation Dip 1 Dip 2 Dip 3 Dip 4 Dip 5 Dip 6

Land Rover without rear-view camera ON OFF ON OFF ON ON

Land Rover with rear-view camera ON ON ON OFF ON ON

Note: Dip switch functions of the TV-500 Dip 1 – activation TV-free Dip 2 – rear-view camera existing Dip 3 – TV icon simulation Dip 4 – no function Dip 5 – CAN-bus termination resistor on the vehicle side Dip 6 – CAN-bus termination resistor on the head-unit side Setting dip 2 to ON codes the factory rear-view camera input which is located on the brown Fakra male connector of the factory monitor. When reverse gear is engaged, the navigation will automatically switch to this input. On vehicles with factory rear-view camera set Dip 2 to ON, too.

Setting the dip switches of the tuner-box DT2C-M717 The 3 dip switches of the tuner-box DT2C-M717 are without function. The dip switch settings are:

Dip1 = OFF

Dip2 = OFF

Dip3 = OFF

LED‘s of the tuner-box DT2C-M717

Requirements Vehicle Range Rover Evoque L538, Range Rover Sport L320 ab Modelljahr 2012, Discovery4 L319 ab Modelljahr 2012, Range Rover (Vogue) L322 ab Modelljahr 2013, Freelander 2 L359 ab Modelljahr 2013 Navigation Touch-Screen Infotainment Version 3 Limitations

Factory-TV-tuner Must NOT be installed. If uninstalled, optical ring must be closed. After-market rear-view cam Compatible with NTSC cameras only. Optionally available adapter is necessary to connect.

2pcs. antenna ANT-12


Pa

ge

7

Connection schema



Pa

ge

8


Pa

ge

9

Installation Switch off ignition and disconnect the vehicle’s battery! If according to factory rules disconnecting the battery

has to be avoided, it is usually sufficient to put the vehicle in sleep-mode. In case the sleep-mode does not

show success, disconnect the battery with a resistor lead.

Place of installation is behind the factory navigation monitor.

Interconnecting tuner-box, CAN-box and harnesses

1. Connect harness CAB-AV-6P to 6pin Molex of tuner-box DT2C-M717.

2. Connect harness DT2C-LR02 to 8pin Molex of CAN-box TV-500.

3. Connect harness DT2C-LR02 to 14pin Molex of tuner-box DT2C-M717.

4. Connect male MOST®-connector of harness DT2C-LR02 into female MOST®-socket of tuner-box DT2C-M717.

Connections to the factory monitor



Pa

ge

10

1. Transfer female 16pin connector vehicle harness from rear of factory monitor into the 16pin male connector of harness DT2C-LR02.

2. Transfer male MOST®-connector of vehicle harness from rear of factory monitor into harness DT2C-LR02.

3. Plug female 16pin connector of DT2C-LR02 into male socket of factory monitor.

4. Plug male MOST®-connector of DT2C-LR02 into male MOST®-socket of factory monitor.

5. Connect female Fakra connector of harness DT2C-LR02 to the brown Fakra 6. connectors on the rear of the factory monitor.

Antennas and IR-remote control set

Mount antennas ANT-12 and connect them to the female f-plug connectors on front of tuner-box DT2C-M717.


Pa

ge

11

We strongly recommend to first test the reception quality of the chosen mounting position of the

antennas before final installation! See “Appendix B – Antenna positioning” for additional information.

The C3-IRSET consists of the external C3C-SENSOR IR-sensor and the C3C-RC IR-remote control and can be used to control the dvbLOGiC’s internal DVB-T tuner functions additionally to the control through the navigations buttons. Connect the C3C-SENSOR to the female black/red/blue 3pin AMP connector of harness DT2C-LR02 and locate the sensor in an accessible place.

Note: To use the teletext function of the dvbLOGiC’s internal DVB-T tuner and the internal USB-AV-player, the C3-IRSET is necessary.

USB-AV-Player

1. Connect the USB extension USBC-EXT to the USB-port on the rear of the tuner-box DT2C-M717.

2. Connect USB-media (up to 2TB, FAT32 and NTFS) to the USB-port of the USB-extension cable USBC-EXT.

Connecting peripheral devices It is possible to connect rear-seat-entertainment and a Conex converter to the dvbLOGiC Tuner. Before final installation of the peripheral devices, we recommend to test-run the dvbLOGiC functions to detect

incompatibility of vehicle, navigation, factory accessories or peripheral devices as soon as possible.



Pa

ge

12

After-market rear-seat-entertainment

Using RCA-cables, connect the rear-seat-entertainment to the female RCA-connector of harness CAB-AV-6P. Note: As the output is a full output, not shared with the video signal for the navigation system, splitting the video with an RCA Y-cable might give a good enough picture for two rear-seat-entertainment monitors. If not, or if connecting more than two monitors, use a video splitter. The pink ACC-output wire (+12V max 1A) of harness DT2C-LR02 can be connected to the ACC-input wires of the rear-seat entertainment to switch it on. It carries +12V when the navigation computer is running.


Pa

ge

13

Conax converter

Connect the micro-USB-port of the optionally available Conax converter (e.g. DVBTC-CONAX) to the micro-USB-port on the rear of tuner-box DT2C-M717.

After-market rear-view camera

1. Connect video-output of after-market rear-view camera to female RCA-connector of optional adapter CAB-TVAS20.

2. Connect female Fakra connector of adapter CAB-TVAS20 to the purple male Fakra connector on the

rear of the factory monitor. 3. Connect the green wire of DT2-LR02 to the camera power supply (+12V max. 1A)

The green wire is high (+12V) when reverse gear is engaged.

Note: Compatible with NTSC cameras only.



Pa

ge

14

Operation

Activation of the video-in-motion function

The video-in-motion function is activated permanently without disturbing the navigation performance.

Selecting the dvbLOGiC as current AV-source

Enter menu Audio/Video and then select TV to select the dvbLOGiC as current AV-source.

Control of the internal DVB-T tuner

The internal DVB-T tuner can be controlled by touch. The functions of the touch are corresponding with the OEM control and the options will be displayed.

Channel search

Enter menu TV and then select + and after it DTV2 – Digital. StartScan will start the channel search, StopScan will stop the channel search.


Pa

ge

15

Channel list

After a successful channel search the channel list is available in the channel list in the TV menu and can be selected by touch.

Switching the channels by steering-wheel

It is possible to switch the channels by arrow-buttons on left hand site of the steering-wheel. Long press – Switching up/down channel list Short press – Switching up/down favourites

Steering-wheel left



Pa

ge

16

Selecting favourites

Enter menu TV and then select + and after it DTV1 – Digital. It is possible to store 6 favourites. Choose the favoured channel in the channel list and longpress the respective button (1-6) in menu DTV1 - Digital. An acoustic signal will confirm the storage.

EPG

Even if the full screen mode is selected the EPG data will be shown on the display.

Teletext Teletext of the dvbLOGiC can only be used with the optionally available C3-IRSET remote control set.

Control of the internal USB AV-player


Pa

ge

17

The internal USB-AV-Player can be controlled by the included remote control. By pressing the HOME button while in TV mode the menu above can be displayed and Movie, Music or Photo of the USB-source can be selected.

dt2lrj12 land rover dvbt - xtremecaraudio...land rover freelander 2013> land rover range 2014>...

Documents