Installation of cracked Dassault Systemes License Server (by SSQ)

1. GENERAL INFORMATION

Cracked by SSQ Dassault Systemes License Server (subsequently the called DSLS-SSQ) allows to run CATIA

V5R21, CATIA V5-6R2012 (aka V5R22), CAA Rade V5R21, CAA Rade V5-6R2012, CAA MultiCax V5R21, CAA

MultiCax V5-6R2012 and all their servise-packs.

It’s possible to expand list of DS programs and licenses supported by DSLS-SSQ

There are two variants of DSLS-SSQ and DS programs DS (CATIA, CAA, MultiCax etc.) installation

Local installation

At Local installation DSLS-SSQ and DS programs are installed on the same computer

Network Installation

At Network Installation DSLS-SSQ is installed on one network computer (server-computer) and DS programs

are installed on other network computers (client-computers)

The process of DSLS-SSQ setup is identical for both the types of installations

2. DSLS-SSQ Installation

2.1. To install DSLS you need Administrator rights! On Vista/Win7 computers UAC mast be disabled! On Vista/Win7

computers it’s strongly recommended to run all executables as Administrator (RMC > run as Administrator)

2.2. Uninstall original DS License Server If you already have got it installed!

2.3. Run installer of DALS-SSQ. Be sure to run proper installer for Win32 or Win64 OS

For Win32 ..\DS_License_Server_32bit_SSQ\ DSLS_32bit_SSQ.msi

For Win64 ..\DS_License_Server_32bit_SSQ\ DSLS_64bit_SSQ.msi.

2.4. Click Next

2.5. Click Next

2.6. Select “Install Server from scratch…” Confirm (ОК) with warning “WARNING! All license keys will be deleted…”.

Click Next

2.7. Wait for the finish of installation. If in process of installation you will get Brandmauer/Firewall/Antivirus

warning about blocking server’s executable (DSLicSrv.exe) you mast unblock it

2.8. At the end of setup window of License Server Administration will start automatically. If not you mast

start it manually ( Start – All Programs - DS License Server – License Server Administration )

If License Server Administration cannot be start manually be sure that DSLicSrv.exe is not blocked in

Process Manager by Brandmauer/Firewall/Antivirus

3. DSLS-SSQ CONFIGURATION

3.1. RMC in window of License Server Administration and select Add new server

3.2. Enter localhost or computer’s name in field License Server name (Computer’s name mast be digits, English

letters, hyphen and underlining signs only! Not English symbols are not allowed!). You can use computer’s

IP instead of computer’s name. Click ОК

3.3. In window of License Server Administration double-click string of server created

3.4. You will get window Server Configuration with server’s computer info

3.5. Run SSQ’s DS License Generator - DSLS_LicGen_SSQ.exe (on Vista/Win7 computers it’s strongly recommended

to run it as Administrator (RMC > run as Administrator))

3.6. Copy Server name ( in the sample screen it’s server-n) and Server ID (( in the sample screen it’s DSL-

41E210195B347D7D) from window Server Configuration to corresponding fields of window DSLS_LicGen_SSQ.

Select CATIA V5R21-V5R22.SSQ in drop-down menu of field Generate License For: and click Generate!

3.7. Save the license file (*.licz)

3.8. Click OK in LicGen’s window (All done! Enjoy!)

3.9. If you intend to install CAA Rade V5R21-V5R22, CAA MultiCax V5R21-V5R22 you mast repeat points. 3.6-3.8

after selecting from the list files CAA Rade V5R21-V5R22.SSQ and/or MULTICAx V5R21-V5R22.SSQ

4. LICENSES ENROLLMENT TO DSLS

4.1. Select installed server (localhost) in windowе License Server Administration and click Enroll Licenses (Menu

License > Enroll). Select license file (*.licz) for CATIA V5R21-R22 and click Open

4.2. In window License Enrollment check that all licenses was enrolled OK

( XXX license data received (0 invalid) ). Click OK

4.3. If you have generated licenses for other DS programs enroll them to DSLS in the same way as described in

points 4.1-4.2

4.4. Now you have finished DSSL-SSQ configuration. To see the enrolled to DSLS licenses open tab License

Administration

Close License Server Administration window

5. CONNECTING DS’s PROGRAMS TO DSLS

5.1. Any installed DS program search the info about DSLS in special configuration file DSLicSRv.txt.

On every computer with DS programs installed this file mast be placed in:

- for computers with Vista/Win7 in folder С:\ProgramData\DassaultSystemes\Licenses

- for computers with ХР in folder C:\Documents and Settings\All Users.WINDOWS\Application

Data\DassaultSystemes\Licenses

Sop copy from crack folder Licenses with file DSLicSRv.txt in it to:

- for computers with Vista/Win7 to folder С:\ProgramData\DassaultSystemes\

- for computers with ХР to folder C:\Documents and Settings\All Users.WINDOWS\Application

Data\DassaultSystemes\

5.2. Open DSLicSRv.txt in text editor. By default it contains the record localhost:4085

It means that DSLS is running on THIS computer (Local installation) and use port 4085 for connection with DS

programs.

If you want to make Network installation you mast edit DSLicSRv.txt on every client’s computer and

replace localhost for real network name of computer with DSLS running

6. LICENSE SELECTION AT DS PROGRAMS FIRST START

Befor DS programs first start you need to select one or more licenses available in DSLS

To do it run DS program Settings Manager (for example CATIA V5-6R2012 Settings Manager > Start – All

Programs – CATIA – Tools - Setting Management V5-6R2012)

Open tab Licensing

In Licensing Information check that program sees DSLS running

Select licenses you need in list List of Available Configurations or Products (you mast select at least one

license). Save setting- click ОК

That’s all.

Now you can run DS’s programs installed

Good luck

Team-SolidSQUAD (SSQ)