dry & wet rot solutions - esi · 2016. 6. 21. · for fungal decay to begin, it requires water...

2
for a survey call or click 0800 99 11 00 www.timberwise.co.uk The Problem Both Dry and Wet Rot can cause structural defects in buildings. Not only is it unsightly but it is also unhealthy. It can grow at an alarming rate in certain conditions. Dry and Wet Rot are usually caused by dampness, running water, poor ventilation and bad maintenance or a combination of these conditions. Dry Rot is the most serious of all wood rotting fungi. For fungal decay to begin, it requires water to penetrate wood which then allows bacteria and micro fungi to colonise resulting in the partial breakdown of the cell structure. The timber then become more porous and potentially wetter. If the moisture content is sustained above 30% then Dry Rot can colonize and germinate which inevitably leads to decay. As Dry Rot spores are airborne this means that all properties are suspectable to attack given the right conditions. Once germination is established the fungus can spread rapidly, even though thick masonry walls, in search of timber causing potentially widespread and extensive damage if not treated at the earliest instance. Wet Rot fungi, whilst generally not as destructive as Dry Rot, it can nevertheless cause severe damage if allowed to go unchecked and is a common cause of structural defects. The Solution Timberwise have over 3 decades of experience in the eradication of both Dry and Wet Rot. Our fully trained and experienced Surveyors will identify the type, and the extent, of any decay and will produce a suitable specification for the eradication of the problem. You will also have the peace of mind from a 20 year guarantee for the work carried out. Timberwise will:- Identify the nature, type and extent of the decay • Determine the cause, finding the source of moisture • Propose the cure with full specification and method statement Advise what additional steps (if any) are required to safeguard the property Dry & Wet Rot Solutions

Upload: others

Post on 24-Feb-2021

1 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Dry & Wet Rot Solutions - ESI · 2016. 6. 21. · For fungal decay to begin, it requires water to penetrate wood which then allows bacteria and micro fungi to colonise resulting in

for a survey call or click 0800 99 11 00

www.timberwise.co.uk

The Problem

Both Dry and Wet Rot can cause structuraldefects in buildings. Not only is it unsightlybut it is also unhealthy. It can grow at analarming rate in certain conditions. Dry andWet Rot are usually caused by dampness,running water, poor ventilation and badmaintenance or a combination of theseconditions.

Dry Rot is the most serious of all woodrotting fungi. For fungal decay to begin, itrequires water to penetrate wood whichthen allows bacteria and micro fungi tocolonise resulting in the partial breakdownof the cell structure. The timber thenbecome more porous and potentiallywetter. If the moisture content is sustainedabove 30% then Dry Rot can colonize andgerminate which inevitably leads to decay.

As Dry Rot spores are airborne this meansthat all properties are suspectable to attackgiven the right conditions.

Once germination is established thefungus can spread rapidly, even thoughthick masonry walls, in search of timbercausing potentially widespread andextensive damage if not treated at theearliest instance.

Wet Rot fungi, whilst generally not asdestructive as Dry Rot, it can neverthelesscause severe damage if allowed to gounchecked and is a common cause ofstructural defects.

The Solution

Timberwise have over 3 decades ofexperience in the eradication of both Dryand Wet Rot.

Our fully trained and experiencedSurveyors will identify the type, and theextent, of any decay and will produce asuitable specification for the eradication ofthe problem.

You will also have the peace of mind froma 20 year guarantee for the work carriedout.

Timberwise will:-

• Identify the nature, type and extent ofthe decay

• Determine the cause, finding thesource of moisture

• Propose the cure with fullspecification and method statement

• Advise what additional steps (if any)are required to safeguard theproperty

Dry & Wet Rot Solutions

Page 2: Dry & Wet Rot Solutions - ESI · 2016. 6. 21. · For fungal decay to begin, it requires water to penetrate wood which then allows bacteria and micro fungi to colonise resulting in

Dry & Wet Rot Solutions

Technical Information

Dry Rot (Serpula lacrymans)

• It is a malignant growth.

• Dry Rot requires moisture contentsas little as 20%. It is also stimulatedby a high relative humidity and a highPH value.

• The vast majority of the infection isoften concealed.

• It is very often associated with poorventilation.

• Often timbers that are some distancefrom the original source of thedampness are attacked.

Why Use Timberwise?

• Professional competence

• Approved by leading Architects / Surveyors

• Long-term guarantees backed by the GPI

• Fast friendly local service nationwide

• Fully insured for Public Liability and Professional Indemnity

• Speedy, efficient and competitive

• Health & Safety approved products

• Conscientious and tidy workmanship from trustworthy tradesmen

Over the decades Timberwise have treated in excess of 200,000 properties throughout the UK.With Timberwise you can be safe in the knowledge that your property is cared for by the professionals.

Contact us on 0800 99 11 00

[email protected]

www.timberwise.co.uk

Local ServiceNational Resource

for a survey call or click 0800 99 11 00

www.timberwise.co.uk

Most common species

Wet Rot (Coniophora puteana)

• It only degrades wet timber that hasa moisture content of above 30%.

• It is most commonly found in joistends, skirting boards and externaljoinery.

• The fungus can develop and live incomplete darkness.

• Wet Rot will only grow where there istimber present.

• Timber suffering from Wet Rot willfeel spongy (even through a coat ofpaint).