drawing package pdf.pdf
TRANSCRIPT
7/21/2019 drawing package pdf.PDF
http://slidepdf.com/reader/full/drawing-package-pdfpdf 1/55
7/21/2019 drawing package pdf.PDF
http://slidepdf.com/reader/full/drawing-package-pdfpdf 2/55
1-00
6-00
7-00
3-00
5-00
4-00
2-00
NOTE: Crank Case and Sump notshown for orientation clarity. These partsare shown in the renderings.
All purchased part are indicated by a (-)inthe Sheet # column
Part # DESCRIPTION QTY. Sheet #
1-00 Carburetor Assembly 1 3
2-00 Crankshaft-Crankcase Assembly 1 11
3-00Piston Connecting Rod
Assembly 1 26
4-00 Gear Shaft Assembly 1 32
5-00 Gear Box Assembly 1 36
6-00 Cylinder Manifolds Assembly 1 43
7-00 Sleeve, Cam Assembly 1 51
Fantastic Four:The Barr & Stroud
Engine
FILE NAME: Motor Exploded.SLDPRT
CHECKED BY:
DESCRIPTION: Final Assembly
QTY: 1DRAWN BY: Fantastic Four
DATE:
THE INFORMATION CONTAINED IN THIS DRAWINGIS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,ME DEPARTMENT. ANY REPRODUCTION IN PARTOR AS A WHOLE WITHOUT THE WRITTEN PERMISSIONOF UNIVERSITY OF IDAHO, ME DEPARTMENT ISPROHIBITED.
PROPRIETARY AND CONFIDENTIAL
MATERIAL: Assorted
DATE: 12/9/2011
UNIVERSITY OF IDAHO
ME DEPARTMENTPART #: 0-00
SCALE: 1:2 SHEET: 2 OF 55
DIMENSIONS ARE IN MILLIMETERSTHIRD ANGLE PROJECTION
LINEAR:X. .25X.X . 1X.XX .01X.XXX .002
DEFAULT TOLERANCES:
ANGULAR:X. 2X.X 1X.XX 0 30'
SolidWorks Student Edition.
For Academic Use Only.
7/21/2019 drawing package pdf.PDF
http://slidepdf.com/reader/full/drawing-package-pdfpdf 3/55
1-01
1-02
1-03
1-04
1-05
1-06
1-07
Part # DESCRIPTION QTY. Sheet #
1-01 Carburetor Body 1 4
1-02 Pipe, Fuel Inlet 1 5
1-03 BARREL, Throttle 1 6
1-04 Top Cover 1 7
1-05 Throttle Lever 1 8
1-06 Needle Valve 1 9
1-07 Float Chamber 1 10
Fantastic Four:The Barr & Stroud
Engine
FILE NAME: Carburetor assembly complete.SLDPRT
CHECKED BY:
DESCRIPTION: Carburetor Assembly
QTY: 1DRAWN BY: Alex Ackerman
DATE:
THE INFORMATION CONTAINED IN THIS DRAWINGIS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,ME DEPARTMENT. ANY REPRODUCTION IN PARTOR AS A WHOLE WITHOUT THE WRITTEN PERMISSIONOF UNIVERSITY OF IDAHO, ME DEPARTMENT ISPROHIBITED.
PROPRIETARY AND CONFIDENTIAL
MATERIAL: Assorted
DATE: 12/8/2011
UNIVERSITY OF IDAHO
ME DEPARTMENTPART #: 1-00
SCALE: 1.5:1 SHEET: 3 OF 55
DIMENSIONS ARE IN MILLIMETERSTHIRD ANGLE PROJECTION
LINEAR:X. .25X.X . 1X.XX .01X.XXX .002
DEFAULT TOLERANCES:
ANGULAR:X. 2X.X 1X.XX 0 30'
SolidWorks Student Edition.
For Academic Use Only.
7/21/2019 drawing package pdf.PDF
http://slidepdf.com/reader/full/drawing-package-pdfpdf 4/55
107
2 0
1.8 clear 10BA
1FRENCH CURVE
1513
1 0
2 2
8
1.950
R2.775
13
12
TOP VIEWFRONT VIEW
BACK VIEWRIGHT VIEW
Fantastic Four:The Barr & Stroud
Engine
FILE NAME: CARBURETOR BODY Brass 1(AA).SLDPRT
CHECKED BY:
DESCRIPTION: Carburetor Body
QTY: 1DRAWN BY: Alex Ackerman
DATE:
THE INFORMATION CONTAINED IN THIS DRAWINGIS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,ME DEPARTMENT. ANY REPRODUCTION IN PARTOR AS A WHOLE WITHOUT THE WRITTEN PERMISSIONOF UNIVERSITY OF IDAHO, ME DEPARTMENT ISPROHIBITED.
PROPRIETARY AND CONFIDENTIAL
MATERIAL: Brass
DATE: 12/8/2011
UNIVERSITY OF IDAHO
ME DEPARTMENTPART #: 1-01
SCALE: 2:1 SHEET: 4 OF 55
THIRD ANGLE PROJECTION
LINEAR:X. .25X.X . 1X.XX .01X.XXX .002
DEFAULT TOLERANCES:
ANGULAR:X. 2X.X 1X.XX 0 30'
DIMENSIONS ARE IN MILLIMETERS
SolidWorks Student Edition.
For Academic Use Only.
7/21/2019 drawing package pdf.PDF
http://slidepdf.com/reader/full/drawing-package-pdfpdf 5/55
3 4
8 1 0 1 5
2 3
M5
7
3
5
2 THRU3
5
BOTTOM VIEW
TOP VIEW
Fantastic Four:The Barr & Stroud
Engine
FILE NAME: PIPE, Fuel inlet brass 1(AA).SLDPRT
CHECKED BY:
DESCRIPTION: Pipe, Fuel Inlet
QTY: 1DRAWN BY: Alex Ackerman
DATE:
THE INFORMATION CONTAINED IN THIS DRAWINGIS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,ME DEPARTMENT. ANY REPRODUCTION IN PARTOR AS A WHOLE WITHOUT THE WRITTEN PERMISSIONOF UNIVERSITY OF IDAHO, ME DEPARTMENT ISPROHIBITED.
PROPRIETARY AND CONFIDENTIAL
MATERIAL: Brass
DATE: 12/8/2011
UNIVERSITY OF IDAHO
ME DEPARTMENTPART #: 1-02
SCALE: 3:1 SHEET: 5 OF 55
DIMENSIONS ARE IN MILLIMETERSTHIRD ANGLE PROJECTION
LINEAR:X. .25X.X . 1X.XX .01X.XXX .002
DEFAULT TOLERANCES:
ANGULAR:X. 2X.X 1X.XX 0 30'
SolidWorks Student Edition.
For Academic Use Only.
7/21/2019 drawing package pdf.PDF
http://slidepdf.com/reader/full/drawing-package-pdfpdf 6/55
3.5
2 2
TAP 4BA
TAP 4BA THRUTO CROSS HOLE
5
13
8
8
Fantastic Four:The Barr & Stroud
Engine
FILE NAME: BARREL, Throttle Mild Steel 1(AA).SLDPRT
CHECKED BY:
DESCRIPTION: BARREL, Throttle
QTY: 1DRAWN BY: Alex Ackerman
DATE:
THE INFORMATION CONTAINED IN THIS DRAWINGIS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,ME DEPARTMENT. ANY REPRODUCTION IN PARTOR AS A WHOLE WITHOUT THE WRITTEN PERMISSIONOF UNIVERSITY OF IDAHO, ME DEPARTMENT ISPROHIBITED.
PROPRIETARY AND CONFIDENTIAL
MATERIAL: Plain Carbon Steel
DATE: 11/27/2011
UNIVERSITY OF IDAHO
ME DEPARTMENTPART #: 1-03
SCALE: 2:1 SHEET: 6 OF 55
DIMENSIONS ARE IN MILLIMETERSTHIRD ANGLE PROJECTION
LINEAR:X. .25X.X . 1X.XX .01X.XXX .002
DEFAULT TOLERANCES:
ANGULAR:X. 2X.X 1X.XX 0 30'
SolidWorks Student Edition.
For Academic Use Only.
7/21/2019 drawing package pdf.PDF
http://slidepdf.com/reader/full/drawing-package-pdfpdf 7/55
13
5 THRU1.7
4 2
Fantastic Four:The Barr & Stroud
Engine
FILE NAME: COVER, Top Material brass 1(AA).SLDPRT
CHECKED BY:
DESCRIPTION: Top Cover
QTY: 1DRAWN BY: Alex Ackerman
DATE:
THE INFORMATION CONTAINED IN THIS DRAWINGIS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,ME DEPARTMENT. ANY REPRODUCTION IN PARTOR AS A WHOLE WITHOUT THE WRITTEN PERMISSIONOF UNIVERSITY OF IDAHO, ME DEPARTMENT ISPROHIBITED.
PROPRIETARY AND CONFIDENTIAL
MATERIAL: Brass
DATE: 12/8/2011
UNIVERSITY OF IDAHO
ME DEPARTMENTPART #: 1-04
SCALE: 4:1 SHEET: 7 OF 55
THIRD ANGLE PROJECTION
LINEAR:X. .25X.X . 1X.XX .01X.XXX .002
DEFAULT TOLERANCES:
ANGULAR:X. 2X.X 1X.XX 0 30'
DIMENSIONS ARE IN MILLIMETERS
SolidWorks Student Edition.
For Academic Use Only.
7/21/2019 drawing package pdf.PDF
http://slidepdf.com/reader/full/drawing-package-pdfpdf 8/55
10
5 THRU
11.5
21.5
14
2.2
4
Fantastic Four:The Barr & Stroud
Engine
FILE NAME: LEVER, Throttle Material brass 1(AA).SLDPRT
CHECKED BY:
DESCRIPTION: Throttle Lever
QTY: 1DRAWN BY: Alex Ackerman
DATE:
THE INFORMATION CONTAINED IN THIS DRAWINGIS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,ME DEPARTMENT. ANY REPRODUCTION IN PARTOR AS A WHOLE WITHOUT THE WRITTEN PERMISSIONOF UNIVERSITY OF IDAHO, ME DEPARTMENT ISPROHIBITED.
PROPRIETARY AND CONFIDENTIAL
MATERIAL: Brass
DATE: 12/8/2011
UNIVERSITY OF IDAHO
ME DEPARTMENTPART #: 1-05
SCALE: 5:1 SHEET: 8 OF 55
DIMENSIONS ARE IN MILLIMETERSTHIRD ANGLE PROJECTION
LINEAR:X. .25X.X . 1X.XX .01X.XXX .002
DEFAULT TOLERANCES:
ANGULAR:X. 2X.X 1X.XX 0 30'
SolidWorks Student Edition.
For Academic Use Only.
7/21/2019 drawing package pdf.PDF
http://slidepdf.com/reader/full/drawing-package-pdfpdf 9/55
2
1 5
1 4 . 5
5. 4 2 °
3 2
0 .
5
0.25
3
3.6
6
Fantastic Four:The Barr & Stroud
Engine
FILE NAME: NEEDLE VALVE midl steel 1(AA).SLDPRT
CHECKED BY:
DESCRIPTION: Needle Valve
QTY: 1DRAWN BY: Alex Ackerman
DATE:
THE INFORMATION CONTAINED IN THIS DRAWINGIS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,ME DEPARTMENT. ANY REPRODUCTION IN PARTOR AS A WHOLE WITHOUT THE WRITTEN PERMISSIONOF UNIVERSITY OF IDAHO, ME DEPARTMENT ISPROHIBITED.
PROPRIETARY AND CONFIDENTIAL
MATERIAL: Mild Steel
DATE: 12/8/2011
UNIVERSITY OF IDAHO
ME DEPARTMENTPART #: 1-06
SCALE: 3:1 SHEET: 9 OF 55
DIMENSIONS ARE IN MILLIMETERSTHIRD ANGLE PROJECTION
LINEAR:X. .25X.X . 1X.XX .01X.XXX .002
DEFAULT TOLERANCES:
ANGULAR:X. 2X.X 1X.XX 0 30'
SolidWorks Student Edition.
For Academic Use Only.
7/21/2019 drawing package pdf.PDF
http://slidepdf.com/reader/full/drawing-package-pdfpdf 10/55
1
1 9
4
25
15.5
M5
5
19 R8
1 6
THRU 5.3
NOTE: The Float Chamber is adummy and is optional
Fantastic Four:The Barr & Stroud
Engine
FILE NAME: FLOAT CHAMBER Brass 1(AA).SLDPRT
CHECKED BY:
DESCRIPTION: Float Chamber
QTY: 1DRAWN BY: Alex Ackerman
DATE:
THE INFORMATION CONTAINED IN THIS DRAWINGIS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,ME DEPARTMENT. ANY REPRODUCTION IN PARTOR AS A WHOLE WITHOUT THE WRITTEN PERMISSIONOF UNIVERSITY OF IDAHO, ME DEPARTMENT ISPROHIBITED.
PROPRIETARY AND CONFIDENTIAL
MATERIAL: Brass
DATE: 12/8/2011
UNIVERSITY OF IDAHO
ME DEPARTMENTPART #: 1-07
SCALE: 2:1 SHEET: 10 OF 55
DIMENSIONS ARE IN MILLIMETERSTHIRD ANGLE PROJECTION
LINEAR:X. .25X.X . 1X.XX .01X.XXX .002
DEFAULT TOLERANCES:
ANGULAR:X. 2X.X 1X.XX 0 30'
SolidWorks Student Edition.
For Academic Use Only.
7/21/2019 drawing package pdf.PDF
http://slidepdf.com/reader/full/drawing-package-pdfpdf 11/55
2-01
2-02
2-042-03 2-102-112-12
2-092-142-08
2-05
2-06
2-13
2-14
2-13
2-07
2-15
2-16
NOTE: Sump is tack-weldedonto the crankcase and thecrankcase front cover
2-17
Part # DESCRIPTION QTY. SHEET #
2-01 Crank Case 1 12,132-02 Sump 1 142-03 Case Front Cover 1 152-04 Front Shaft 1 162-05 Rear Counterweight 1 172-06 Crank Pin 1 182-07 Front Counterweight 1 192-08 Rear Shaft 1 202-09 Crankshaft Gear 1 212-10 Bronze Bushing 1 222-11 Flywheel Hub 1 232-12 Flywheel 1 242-13 Main Bearing Cap 2 252-14 Ballrace 22x8x7 2 -2-15 HHMS M3.5x0.6x16 4 -2-16 HHMS 4x0.7x10 4 -2-17 HHMS M2.2x0.6x8 3 -
Fantastic Four:The Barr & Stroud
Engine
FILE NAME: Crankshaft-Crankcase (PS).SLDPRT
CHECKED BY:
DESCRIPTION: Crankshaft-Crankcase Assembly
QTY: 1DRAWN BY: Phillip Spinden
DATE:
THE INFORMATION CONTAINED IN THIS DRAWINGIS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,ME DEPARTMENT. ANY REPRODUCTION IN PARTOR AS A WHOLE WITHOUT THE WRITTEN PERMISSIONOF UNIVERSITY OF IDAHO, ME DEPARTMENT ISPROHIBITED.
PROPRIETARY AND CONFIDENTIAL
MATERIAL: Assorted
DATE: 12/8/2011
UNIVERSITY OF IDAHO
ME DEPARTMENTPART #: 2-00
SCALE: 1:2 SHEET: 11 OF 55
DIMENSIONS ARE IN MILLIMETERSTHIRD ANGLE PROJECTION
LINEAR:X. .25X.X . 1X.XX .01X.XXX .002
DEFAULT TOLERANCES:
ANGULAR:X. 2X.X 1X.XX 0 30'
SolidWorks Student Edition.
For Academic Use Only.
7/21/2019 drawing package pdf.PDF
http://slidepdf.com/reader/full/drawing-package-pdfpdf 12/55
R6
40
35
30-40 tpi
2 0
52
35
2
4
6
3
R3
1 7
4
R12R11
5 2
Fantastic Four:The Barr & Stroud
Engine
FILE NAME: crank case (BZ).SLDPRT
CHECKED BY:
DESCRIPTION: Crank Case
QTY: 1DRAWN BY: Brian Zaladonis
DATE:
THE INFORMATION CONTAINED IN THIS DRAWINGIS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,ME DEPARTMENT. ANY REPRODUCTION IN PARTOR AS A WHOLE WITHOUT THE WRITTEN PERMISSIONOF UNIVERSITY OF IDAHO, ME DEPARTMENT ISPROHIBITED.
PROPRIETARY AND CONFIDENTIAL
MATERIAL: 6061-T6 (SS)
DATE: 12/4/2011
UNIVERSITY OF IDAHO
ME DEPARTMENTPART #: 2-01
SCALE: 1:1 SHEET: 12 OF 55
DIMENSIONS ARE IN MILLIMETERSTHIRD ANGLE PROJECTION
LINEAR:X. .25X.X . 1X.XX .01X.XXX .002
DEFAULT TOLERANCES:
ANGULAR:X. 2X.X 1X.XX 0 30'
SolidWorks Student Edition.
For Academic Use Only.
7/21/2019 drawing package pdf.PDF
http://slidepdf.com/reader/full/drawing-package-pdfpdf 13/55
32 15
25 48 5 x 1.8 5.75 BA8
38
R6
32
2 7
2 0
48
A A
B B
1
4
5
8 0
SECTION A-A
8 0 °
SECTION B-B
FILE NAME: crank case (BZ).SLDPRT
CHECKED BY:
DESCRIPTION: Crank Case
QTY: 1DRAWN BY: Brian Zaladonis
DATE:
THE INFORMATION CONTAINED IN THIS DRAWINGIS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,ME DEPARTMENT. ANY REPRODUCTION IN PARTOR AS A WHOLE WITHOUT THE WRITTEN PERMISSIONOF UNIVERSITY OF IDAHO, ME DEPARTMENT ISPROHIBITED.
PROPRIETARY AND CONFIDENTIAL
MATERIAL: 6061-T6 (SS)
DATE: 12/4/2011
UNIVERSITY OF IDAHO
ME DEPARTMENTPART #: 2-01
SCALE: 1:1 SHEET: 13 OF 55
DIMENSIONS ARE IN MILLIMETERSTHIRD ANGLE PROJECTION
LINEAR:X. .25X.X . 1X.XX .01X.XXX .002
DEFAULT TOLERANCES:
ANGULAR:X. 2X.X 1X.XX 0 30'
Fantastic Four:The Barr & Stroud
EngineSolidWorks Student Edition.
For Academic Use Only.
7/21/2019 drawing package pdf.PDF
http://slidepdf.com/reader/full/drawing-package-pdfpdf 14/55
R26
R17.5
4 6
52
R6
2 6
52
37
R12
NOTE: Shell thickness is 0.7 mmRadius of sump body is 26mm
Fantastic Four:The Barr & Stroud
Engine
FILE NAME: SUMP Aluminum sheet 1(AA).SLDPRT
CHECKED BY:
DESCRIPTION: Sump
QTY: 1DRAWN BY: Alex Ackerman
DATE:
THE INFORMATION CONTAINED IN THIS DRAWINGIS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,ME DEPARTMENT. ANY REPRODUCTION IN PARTOR AS A WHOLE WITHOUT THE WRITTEN PERMISSIONOF UNIVERSITY OF IDAHO, ME DEPARTMENT ISPROHIBITED.
PROPRIETARY AND CONFIDENTIAL
MATERIAL: 6061-T6 (SS)
DATE: 11/27/2011
UNIVERSITY OF IDAHO
ME DEPARTMENTPART #: 2-02
SCALE: 1:1 SHEET: 14 OF 55
DIMENSIONS ARE IN MILLIMETERSTHIRD ANGLE PROJECTION
LINEAR:X. .25X.X . 1X.XX .01X.XXX .002
DEFAULT TOLERANCES:
ANGULAR:X. 2X.X 1X.XX 0 30'
SolidWorks Student Edition.
For Academic Use Only.
7/21/2019 drawing package pdf.PDF
http://slidepdf.com/reader/full/drawing-package-pdfpdf 15/55
6 X 2.8 THRU
38
12
1 5
2
5
7
2 4
3 8
Fantastic Four:The Barr & Stroud
Engine
FILE NAME: Case Front Cover (BZ).SLDPRT
CHECKED BY:
DESCRIPTION: Case Front Cover
QTY: 1DRAWN BY: Brian ZaladonisDATE:
THE INFORMATION CONTAINED IN THIS DRAWINGIS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,ME DEPARTMENT. ANY REPRODUCTION IN PARTOR AS A WHOLE WITHOUT THE WRITTEN PERMISSIONOF UNIVERSITY OF IDAHO, ME DEPARTMENT ISPROHIBITED.
PROPRIETARY AND CONFIDENTIAL
MATERIAL: 6061-T6 (SS)
DATE: 12/8/2011
UNIVERSITY OF IDAHO
ME DEPARTMENTPART #: 2-03
SCALE: 2:1 SHEET: 15 OF 55
DIMENSIONS ARE IN MILLIMETERSTHIRD ANGLE PROJECTION
LINEAR:X. .25X.X . 1X.XX .01X.XXX .002
DEFAULT TOLERANCES:
ANGULAR:X. 2X.X 1X.XX 0 30'
SolidWorks Student Edition.
For Academic Use Only.
7/21/2019 drawing package pdf.PDF
http://slidepdf.com/reader/full/drawing-package-pdfpdf 16/55
6.35
8
1/4 BSF
2239
47
FILE NAME: Front Shaft (PS).SLDPRT
CHECKED BY:
DESCRIPTION: Front Shaft
QTY: 1DRAWN BY: Phillip SpindenDATE:
THE INFORMATION CONTAINED IN THIS DRAWINGIS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,ME DEPARTMENT. ANY REPRODUCTION IN PARTOR AS A WHOLE WITHOUT THE WRITTEN PERMISSIONOF UNIVERSITY OF IDAHO, ME DEPARTMENT ISPROHIBITED.
PROPRIETARY AND CONFIDENTIAL
MATERIAL: Alloy Steel
DATE: 12/8/2011
UNIVERSITY OF IDAHO
ME DEPARTMENTPART #: 2-04
SCALE: 2:1 SHEET: 16 OF 55
DIMENSIONS ARE IN MILLIMETERSTHIRD ANGLE PROJECTION
LINEAR:X. .25X.X . 1X.XX .01X.XXX .002
DEFAULT TOLERANCES:
ANGULAR:X. 2X.X 1X.XX 0 30'
Fantastic Four:The Barr & Stroud
EngineSolidWorks Student Edition.
For Academic Use Only.
7/21/2019 drawing package pdf.PDF
http://slidepdf.com/reader/full/drawing-package-pdfpdf 17/55
R23
12
8
11.7
2 X R2
R7.5 2 .
7 1
3
2 0 .
7
2 2 .
4
R4
1 5
This side tapped BA-8
5
6
1 .
3 5 5
2.500
Fantastic Four:The Barr & Stroud
Engine
FILE NAME: Rear Counterweight (PS).SLDPRT
CHECKED BY:
DESCRIPTION: Rear Counterweight
QTY: 1DRAWN BY: Phillip SpindenDATE:
THE INFORMATION CONTAINED IN THIS DRAWINGIS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,ME DEPARTMENT. ANY REPRODUCTION IN PARTOR AS A WHOLE WITHOUT THE WRITTEN PERMISSIONOF UNIVERSITY OF IDAHO, ME DEPARTMENT ISPROHIBITED.
PROPRIETARY AND CONFIDENTIAL
MATERIAL: Alloy Steel
DATE: 12/8/2011
UNIVERSITY OF IDAHO
ME DEPARTMENTPART #: 2-05
SCALE: 2:1 SHEET: 17 OF 55
THIRD ANGLE PROJECTION
LINEAR:X. .25X.X . 1X.XX .01X.XXX .002
DEFAULT TOLERANCES:
ANGULAR:X. 2X.X 1X.XX 0 30'
DIMENSIONS ARE IN MILLIMETERS
SolidWorks Student Edition.
For Academic Use Only.
7/21/2019 drawing package pdf.PDF
http://slidepdf.com/reader/full/drawing-package-pdfpdf 18/55
8
4
18
Fantastic Four:The Barr & Stroud
Engine
FILE NAME: Crank Pin (PS).SLDPRT
CHECKED BY:
DESCRIPTION: Crank Pin
QTY: 1DRAWN BY: Phillip SpindenDATE:
THE INFORMATION CONTAINED IN THIS DRAWINGIS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,ME DEPARTMENT. ANY REPRODUCTION IN PARTOR AS A WHOLE WITHOUT THE WRITTEN PERMISSIONOF UNIVERSITY OF IDAHO, ME DEPARTMENT ISPROHIBITED.
PROPRIETARY AND CONFIDENTIAL
MATERIAL: Alloy Steel
DATE: 12/8/2011
UNIVERSITY OF IDAHO
ME DEPARTMENT
PART #: 2-06
SCALE: 2:1 SHEET: 18 OF 55
DIMENSIONS ARE IN MILLIMETERSTHIRD ANGLE PROJECTION
LINEAR:X. .25X.X . 1X.XX .01X.XXX .002
DEFAULT TOLERANCES:
ANGULAR:X. 2X.X 1X.XX 0 30'
SolidWorks Student Edition.
For Academic Use Only.
7/21/2019 drawing package pdf.PDF
http://slidepdf.com/reader/full/drawing-package-pdfpdf 19/55
R23
12
8
11.7R7.5
8
1 5
1 6
2 X R2
5
6
2 2 .
5
Fantastic Four:The Barr & Stroud
Engine
FILE NAME: Front Counterweight (PS).SLDPRT
CHECKED BY:
DESCRIPTION: Front Counterweight
QTY: 1DRAWN BY: Phillip SpindenDATE:
THE INFORMATION CONTAINED IN THIS DRAWINGIS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,ME DEPARTMENT. ANY REPRODUCTION IN PARTOR AS A WHOLE WITHOUT THE WRITTEN PERMISSIONOF UNIVERSITY OF IDAHO, ME DEPARTMENT ISPROHIBITED.
PROPRIETARY AND CONFIDENTIAL
MATERIAL: Alloy Steel
DATE: 12/8/2011
UNIVERSITY OF IDAHO
ME DEPARTMENT
PART #: 2-07
SCALE: 2:1 SHEET: 19 OF 55
DIMENSIONS ARE IN MILLIMETERSTHIRD ANGLE PROJECTION
LINEAR:X. .25X.X . 1X.XX .01X.XXX .002
DEFAULT TOLERANCES:
ANGULAR:X. 2X.X 1X.XX 0 30'
SolidWorks Student Edition.
For Academic Use Only.
7/21/2019 drawing package pdf.PDF
http://slidepdf.com/reader/full/drawing-package-pdfpdf 20/55
8
6.35
1/4 BSF
13
19
23
2.453 THRU
Fantastic Four:The Barr & Stroud
Engine
FILE NAME: Rear Shaft (PS).SLDPRT
CHECKED BY:
DESCRIPTION: Rear Shaft
QTY: 1DRAWN BY: Phillip SpindenDATE:
THE INFORMATION CONTAINED IN THIS DRAWINGIS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,ME DEPARTMENT. ANY REPRODUCTION IN PARTOR AS A WHOLE WITHOUT THE WRITTEN PERMISSIONOF UNIVERSITY OF IDAHO, ME DEPARTMENT ISPROHIBITED.
PROPRIETARY AND CONFIDENTIAL
MATERIAL: Alloy Steel
DATE: 12/8/2011
UNIVERSITY OF IDAHO
ME DEPARTMENT
PART #: 2-08
SCALE: 2:1 SHEET: 20 OF 55
DIMENSIONS ARE IN MILLIMETERSTHIRD ANGLE PROJECTION
LINEAR:
X. .25X.X . 1X.XX .01X.XXX .002
DEFAULT TOLERANCES:
ANGULAR:
X. 2X.X 1X.XX 0 30'
SolidWorks Student Edition.
For Academic Use Only.
7/21/2019 drawing package pdf.PDF
http://slidepdf.com/reader/full/drawing-package-pdfpdf 21/55
10
6.35
0 . 7
5
1.587
3 T H R U ALL 5
6
NOTE: DP=40 24-TPCD: 15.24mm OD: 16.51mm
Fantastic Four:The Barr & Stroud
Engine
FILE NAME: Crankshaft Gear (PS).SLDPRT
CHECKED BY:
DESCRIPTION: Crankshaft Gear
QTY: 1DRAWN BY: Phillip Spinden
DATE:
THE INFORMATION CONTAINED IN THIS DRAWINGIS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,ME DEPARTMENT. ANY REPRODUCTION IN PARTOR AS A WHOLE WITHOUT THE WRITTEN PERMISSIONOF UNIVERSITY OF IDAHO, ME DEPARTMENT ISPROHIBITED.
PROPRIETARY AND CONFIDENTIAL
MATERIAL: Alloy Steel
DATE: 12/8/2011
UNIVERSITY OF IDAHO
ME DEPARTMENT
PART #: 2-09
SCALE: 5:1 SHEET: 21 OF 55
THIRD ANGLE PROJECTION
LINEAR:
X. .25X.X . 1X.XX .01X.XXX .002
DEFAULT TOLERANCES:
ANGULAR:
X. 2X.X 1X.XX 0 30'
DIMENSIONS ARE IN MILLIMETERS
SolidWorks Student Edition.
For Academic Use Only.
7/21/2019 drawing package pdf.PDF
http://slidepdf.com/reader/full/drawing-package-pdfpdf 22/55
12
8
9
Fantastic Four:The Barr & Stroud
Engine
FILE NAME: Bronze bushing (BZ).SLDPRT
CHECKED BY:
DESCRIPTION: Bronze Bushing
QTY: 1DRAWN BY: Brian Zaladonis
DATE:
THE INFORMATION CONTAINED IN THIS DRAWINGIS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,ME DEPARTMENT. ANY REPRODUCTION IN PARTOR AS A WHOLE WITHOUT THE WRITTEN PERMISSIONOF UNIVERSITY OF IDAHO, ME DEPARTMENT ISPROHIBITED.
PROPRIETARY AND CONFIDENTIAL
MATERIAL: Aluminum Bronze
DATE: 11/27/2011
UNIVERSITY OF IDAHO
ME DEPARTMENT
PART #: 2-10
SCALE: 3:1 SHEET: 22 OF 55
DIMENSIONS ARE IN MILLIMETERSTHIRD ANGLE PROJECTION
LINEAR:
X. .25X.X . 1X.XX .01X.XXX .002
DEFAULT TOLERANCES:
ANGULAR:
X. 2X.X 1X.XX 0 30'
SolidWorks Student Edition.
For Academic Use Only.
7/21/2019 drawing package pdf.PDF
http://slidepdf.com/reader/full/drawing-package-pdfpdf 23/55
34
12.5
8
6.95
4 X 0.7
25
1
4
20
1 . 5 0 °
Fantastic Four:The Barr & Stroud
Engine
FILE NAME: HUB flywheel (RB).SLDPRT
CHECKED BY:
DESCRIPTION: Flywheel Hub
QTY: 1DRAWN BY: Richard Broaddus
DATE:
THE INFORMATION CONTAINED IN THIS DRAWINGIS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,ME DEPARTMENT. ANY REPRODUCTION IN PARTOR AS A WHOLE WITHOUT THE WRITTEN PERMISSIONOF UNIVERSITY OF IDAHO, ME DEPARTMENT ISPROHIBITED.
PROPRIETARY AND CONFIDENTIAL
MATERIAL: Alloy Steel
DATE: 12/8/2011
UNIVERSITY OF IDAHO
ME DEPARTMENT
PART #: 2-11
SCALE: 1.5:1 SHEET: 23 OF 55
DIMENSIONS ARE IN MILLIMETERSTHIRD ANGLE PROJECTION
LINEAR:
X. .25X.X . 1X.XX .01X.XXX .002
DEFAULT TOLERANCES:
ANGULAR:
X. 2X.X 1X.XX 0 30'
SolidWorks Student Edition.
For Academic Use Only.
7/21/2019 drawing package pdf.PDF
http://slidepdf.com/reader/full/drawing-package-pdfpdf 24/55
6
9
34
80
34
12.5
4x 4.3 THRU
Fantastic Four:The Barr & Stroud
Engine
FILE NAME: FLYWHEEL(AA).SLDPRT
CHECKED BY:
DESCRIPTION: Flywheel
QTY: 1DRAWN BY: Alex Ackerman
DATE:
THE INFORMATION CONTAINED IN THIS DRAWINGIS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,ME DEPARTMENT. ANY REPRODUCTION IN PARTOR AS A WHOLE WITHOUT THE WRITTEN PERMISSIONOF UNIVERSITY OF IDAHO, ME DEPARTMENT ISPROHIBITED.
PROPRIETARY AND CONFIDENTIAL
MATERIAL: Plain Carbon Steel
DATE: 12/8/2011
UNIVERSITY OF IDAHO
ME DEPARTMENT
PART #: 2-12
SCALE: 1:2 SHEET: 24 OF 55
DIMENSIONS ARE IN MILLIMETERSTHIRD ANGLE PROJECTION
LINEAR:
X. .25X.X . 1X.XX .01X.XXX .002
DEFAULT TOLERANCES:
ANGULAR:
X. 2X.X 1X.XX 0 30'
SolidWorks Student Edition.
For Academic Use Only.
7/21/2019 drawing package pdf.PDF
http://slidepdf.com/reader/full/drawing-package-pdfpdf 25/55
R15 R11
8
10
8.3
2 X 3.6 THRU
42
7
Fantastic Four:The Barr & Stroud
Engine
FILE NAME: Main Bearing Cap (BZ).SLDPRT
CHECKED BY:
DESCRIPTION: Main Bearing Cap
QTY: 2DRAWN BY: Brian Zaladonis
DATE:
THE INFORMATION CONTAINED IN THIS DRAWINGIS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,ME DEPARTMENT. ANY REPRODUCTION IN PARTOR AS A WHOLE WITHOUT THE WRITTEN PERMISSIONOF UNIVERSITY OF IDAHO, ME DEPARTMENT ISPROHIBITED.
PROPRIETARY AND CONFIDENTIAL
MATERIAL: 6061-T6 (SS)
DATE: 11/27/2011
UNIVERSITY OF IDAHO
ME DEPARTMENT
PART #: 2-13
SCALE: 1:2 SHEET: 25 OF 55
DIMENSIONS ARE IN MILLIMETERSTHIRD ANGLE PROJECTION
LINEAR:
X. .25X.X . 1X.XX .01X.XXX .002
DEFAULT TOLERANCES:
ANGULAR:
X. 2X.X 1X.XX 0 30'
SolidWorks Student Edition.
For Academic Use Only.
7/21/2019 drawing package pdf.PDF
http://slidepdf.com/reader/full/drawing-package-pdfpdf 26/55
3-01
3-02
3-033-04
3-05 PART # DESCRIPTION QTY. SHEET #
3-01 Piston Head 1 27
3-02 Connecting Rod 1 28
3-03 Connecting Rod Bushing 1 29
3-04 End Caps 2 30
3-05 Piston Pin 1 31
Fantastic Four:The Barr & Stroud
Engine
FILE NAME: Piston-Connecting Rod.SLDPRT
CHECKED BY:
DESCRIPTION: Piston Connecting Rod Assembly
QTY: 1DRAWN BY: Alex Ackerman
DATE:
THE INFORMATION CONTAINED IN THIS DRAWINGIS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,ME DEPARTMENT. ANY REPRODUCTION IN PARTOR AS A WHOLE WITHOUT THE WRITTEN PERMISSIONOF UNIVERSITY OF IDAHO, ME DEPARTMENT ISPROHIBITED.
PROPRIETARY AND CONFIDENTIAL
MATERIAL: Assorted
DATE: 12/8/2011
UNIVERSITY OF IDAHO
ME DEPARTMENT
PART #: 3-00
SCALE: 1:1 SHEET: 26 OF 55
DIMENSIONS ARE IN MILLIMETERSTHIRD ANGLE PROJECTION
LINEAR:
X. .25X.X . 1X.XX .01X.XXX .002
DEFAULT TOLERANCES:
ANGULAR:
X. 2X.X 1X.XX 0 30'
SolidWorks Student Edition.
For Academic Use Only.
7/21/2019 drawing package pdf.PDF
http://slidepdf.com/reader/full/drawing-package-pdfpdf 27/55
2 7
8
1 4
1 7
1 8
1 9
2 0
2 3
C
C
R6.38
136 THRU
1 9
17
SECTION C-C
7 10
19.5 6
R5
22
Fantastic Four:The Barr & Stroud
Engine
FILE NAME: Piston Head (RB).SLDPRT
CHECKED BY:
DESCRIPTION: Piston Head
QTY: 1DRAWN BY: Richard Broaddus
DATE:
THE INFORMATION CONTAINED IN THIS DRAWINGIS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,ME DEPARTMENT. ANY REPRODUCTION IN PARTOR AS A WHOLE WITHOUT THE WRITTEN PERMISSIONOF UNIVERSITY OF IDAHO, ME DEPARTMENT ISPROHIBITED.
PROPRIETARY AND CONFIDENTIAL
MATERIAL: 2618-T61 (SS)
DATE: 12/8/2011
UNIVERSITY OF IDAHO
ME DEPARTMENT
PART #: 3-01
SCALE: 2:1 SHEET: 27 OF 55
THIRD ANGLE PROJECTION
LINEAR:
X. .25X.X . 1X.XX .01X.XXX .002
DEFAULT TOLERANCES:
ANGULAR:
X. 2X.X 1X.XX 0 30'
DIMENSIONS ARE IN MILLIMETERS
SolidWorks Student Edition.
For Academic Use Only.
7/21/2019 drawing package pdf.PDF
http://slidepdf.com/reader/full/drawing-package-pdfpdf 28/55
10
15
6 THRU
10 THRU
4 X R2
0.63°
6 8 .
5
4
8
Fantastic Four:The Barr & Stroud
Engine
FILE NAME: Connecting Rod (RB).SLDPRT
CHECKED BY:
DESCRIPTION: Connecting Rod
QTY: 1DRAWN BY: Richard Broaddus
DATE:
THE INFORMATION CONTAINED IN THIS DRAWINGIS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,ME DEPARTMENT. ANY REPRODUCTION IN PARTOR AS A WHOLE WITHOUT THE WRITTEN PERMISSIONOF UNIVERSITY OF IDAHO, ME DEPARTMENT ISPROHIBITED.
PROPRIETARY AND CONFIDENTIAL
MATERIAL: 2618-T61 (SS)
DATE: 12/8/2011
UNIVERSITY OF IDAHO
ME DEPARTMENT
PART #: 3-02
SCALE: 1:1 SHEET: 28 OF 55
DIMENSIONS ARE IN MILLIMETERTHIRD ANGLE PROJECTION
LINEAR:
X. .25X.X . 1X.XX .01X.XXX .002
DEFAULT TOLERANCES:
ANGULAR:
X. 2X.X 1X.XX 0 30'
SolidWorks Student Edition.
For Academic Use Only.
7/21/2019 drawing package pdf.PDF
http://slidepdf.com/reader/full/drawing-package-pdfpdf 29/55
3.5 THRU
6
2 0
Fantastic Four:The Barr & Stroud
Engine
FILE NAME: Piston Pin (RB).SLDPRT
CHECKED BY:
DESCRIPTION: Piston Pin
QTY: 1DRAWN BY: Alex Ackerman
DATE:
THE INFORMATION CONTAINED IN THIS DRAWINGIS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,ME DEPARTMENT. ANY REPRODUCTION IN PARTOR AS A WHOLE WITHOUT THE WRITTEN PERMISSIONOF UNIVERSITY OF IDAHO, ME DEPARTMENT ISPROHIBITED.
PROPRIETARY AND CONFIDENTIAL
MATERIAL: Silver Steel
DATE: 12/8/2011
UNIVERSITY OF IDAHO
ME DEPARTMENT
PART #: 3-03
SCALE: 5:1 SHEET: 29 OF 55
DIMENSIONS ARE IN MILLIMETERSTHIRD ANGLE PROJECTION
LINEAR:
X. .25X.X . 1X.XX .01X.XXX .002
DEFAULT TOLERANCES:
ANGULAR:
X. 2X.X 1X.XX 0 30'
SolidWorks Student Edition.
For Academic Use Only.
7/21/2019 drawing package pdf.PDF
http://slidepdf.com/reader/full/drawing-package-pdfpdf 30/55
3.5
R4.56
Fantastic Four:The Barr & Stroud
Engine
FILE NAME: End Cap (RB).SLDPRT
CHECKED BY:
DESCRIPTION: End Caps
QTY: 2DRAWN BY: Richard Broaddus
DATE:
THE INFORMATION CONTAINED IN THIS DRAWINGIS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,ME DEPARTMENT. ANY REPRODUCTION IN PARTOR AS A WHOLE WITHOUT THE WRITTEN PERMISSIONOF UNIVERSITY OF IDAHO, ME DEPARTMENT ISPROHIBITED.
PROPRIETARY AND CONFIDENTIAL
MATERIAL: 1060 Alloy
DATE: 12/8/2011
UNIVERSITY OF IDAHO
ME DEPARTMENT
PART #: 3-04
SCALE: 10:1 SHEET: 30 OF 55
DIMENSIONS ARE IN MILLIMETERSTHIRD ANGLE PROJECTION
LINEAR:
X. .25X.X . 1X.XX .01X.XXX .002
DEFAULT TOLERANCES:
ANGULAR:
X. 2X.X 1X.XX 0 30'
SolidWorks Student Edition.
For Academic Use Only.
7/21/2019 drawing package pdf.PDF
http://slidepdf.com/reader/full/drawing-package-pdfpdf 31/55
10
8 THRU
8
Fantastic Four:The Barr & Stroud
Engine
FILE NAME: Connecting Rod Bushing (RB).SLDPRT
CHECKED BY:
DESCRIPTION: Connecting Rod Bushing
QTY: 1DRAWN BY: Richard Broaddus
DATE:
THE INFORMATION CONTAINED IN THIS DRAWINGIS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,ME DEPARTMENT. ANY REPRODUCTION IN PARTOR AS A WHOLE WITHOUT THE WRITTEN PERMISSIONOF UNIVERSITY OF IDAHO, ME DEPARTMENT ISPROHIBITED.
PROPRIETARY AND CONFIDENTIAL
MATERIAL: Commercial Bronze, UNS C22000 (90-10 Bronze)
DATE: 12/8/2011
UNIVERSITY OF IDAHO
ME DEPARTMENT
PART #: 3-05
SCALE: 5:1 SHEET: 31 OF 55
DIMENSIONS ARE IN MILLIMETERSTHIRD ANGLE PROJECTION
LINEAR:
X. .25X.X . 1X.XX .01X.XXX .002
DEFAULT TOLERANCES:
ANGULAR:
X. 2X.X 1X.XX 0 30'
SolidWorks Student Edition.
For Academic Use Only.
7/21/2019 drawing package pdf.PDF
http://slidepdf.com/reader/full/drawing-package-pdfpdf 32/55
4-02
4-06
4-014-04
4-06
4-034-05
Part # DESCRIPTION QTY. Sheet #
4-01 Gear Shaft 1 334-02 Sleeve Drive Gear 1 344-03 Magneto Drive Gear 1 354-05 Ballrace 16x5x5 1 -4-04 Ballrace 19x7x6 1 -4-06 1mm Spacer 2 -
Fantastic Four:The Barr & Stroud
Engine
FILE NAME: Gear shaft (PS).SLDPRT
CHECKED BY:
DESCRIPTION: Gear Shaft Assembly
QTY: 1DRAWN BY: Phillip Spinden
DATE:
THE INFORMATION CONTAINED IN THIS DRAWINGIS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,ME DEPARTMENT. ANY REPRODUCTION IN PARTOR AS A WHOLE WITHOUT THE WRITTEN PERMISSIONOF UNIVERSITY OF IDAHO, ME DEPARTMENT ISPROHIBITED.
PROPRIETARY AND CONFIDENTIAL
MATERIAL: Assorted
DATE: 12/6/2011
UNIVERSITY OF IDAHO
ME DEPARTMENT
PART #: 4-00
SCALE: 1.5:1 SHEET: 32 OF 55
DIMENSIONS ARE IN MILLIMETERSTHIRD ANGLE PROJECTION
LINEAR:
X. .25X.X . 1X.XX .01X.XXX .002
DEFAULT TOLERANCES:
ANGULAR:
X. 2X.X 1X.XX 0 30'
SolidWorks Student Edition.
For Academic Use Only.
7/21/2019 drawing package pdf.PDF
http://slidepdf.com/reader/full/drawing-package-pdfpdf 33/55
7
6
5 7
18.5
2229.5
0.5
0.52.25
2 THRU
5
R6
NOTE: The Cutout edge passesthrough the center of the shaft
BOTTOM VIEW RIGHT SIDE VIEW TOP VIEW
Fantastic Four:The Barr & Stroud
Engine
FILE NAME: Gear shaft (PS).SLDPRT
CHECKED BY:
DESCRIPTION: Gear Shaft
QTY: 1DRAWN BY: Phillip Spinden
DATE:
THE INFORMATION CONTAINED IN THIS DRAWINGIS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,ME DEPARTMENT. ANY REPRODUCTION IN PARTOR AS A WHOLE WITHOUT THE WRITTEN PERMISSIONOF UNIVERSITY OF IDAHO, ME DEPARTMENT ISPROHIBITED.
PROPRIETARY AND CONFIDENTIAL
MATERIAL: Alloy Steel
DATE: 12/8/2011
UNIVERSITY OF IDAHO
ME DEPARTMENT
PART #: 4-01
SCALE: 3:1 SHEET: 33 OF 55
DIMENSIONS ARE IN MILLIMETERSTHIRD ANGLE PROJECTION
LINEAR:
X. .25X.X . 1X.XX .01X.XXX .002
DEFAULT TOLERANCES:
ANGULAR:
X. 2X.X 1X.XX 0 30'
SolidWorks Student Edition.
For Academic Use Only.
7/21/2019 drawing package pdf.PDF
http://slidepdf.com/reader/full/drawing-package-pdfpdf 34/55
5
11.5
7
28.5
12
NOTE: PCD=30.48 OD= 31.75DP=40 48-T
Eccentric circle is 12mm diameter andintersects the center of the gear
Fantastic Four:The Barr & Stroud
Engine
FILE NAME: Sleeve Drive Gear (PS).SLDPRT
CHECKED BY:
DESCRIPTION: Sleeve Drive Gear
QTY: 1DRAWN BY: Phillip Spinden
DATE:
THE INFORMATION CONTAINED IN THIS DRAWINGIS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,ME DEPARTMENT. ANY REPRODUCTION IN PARTOR AS A WHOLE WITHOUT THE WRITTEN PERMISSIONOF UNIVERSITY OF IDAHO, ME DEPARTMENT ISPROHIBITED.
PROPRIETARY AND CONFIDENTIAL
MATERIAL: Alloy Steel
DATE: 12/8/2011
UNIVERSITY OF IDAHO
ME DEPARTMENT
PART #: 4-02
SCALE: 2:1 SHEET: 34 OF 55
DIMENSIONS ARE IN MILLIMETERSTHIRD ANGLE PROJECTION
LINEAR:
X. .25X.X . 1X.XX .01X.XXX .002
DEFAULT TOLERANCES:
ANGULAR:
X. 2X.X 1X.XX 0 30'
SolidWorks Student Edition.
For Academic Use Only.
7/21/2019 drawing package pdf.PDF
http://slidepdf.com/reader/full/drawing-package-pdfpdf 35/55
6
1.5
0 . 7
5
2 2.5
NOTE: PCD=17.145 OD=18.415DP=40 27-T
Fantastic Four:The Barr & Stroud
Engine
FILE NAME: Driven Gear (PS).SLDPRT
CHECKED BY:
DESCRIPTION: Magneto Drive Gear
QTY: 1DRAWN BY: Phillip Spinden
DATE:
THE INFORMATION CONTAINED IN THIS DRAWINGIS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,ME DEPARTMENT. ANY REPRODUCTION IN PARTOR AS A WHOLE WITHOUT THE WRITTEN PERMISSIONOF UNIVERSITY OF IDAHO, ME DEPARTMENT ISPROHIBITED.
PROPRIETARY AND CONFIDENTIAL
MATERIAL: Brass
DATE: 12/8/2011
UNIVERSITY OF IDAHO
ME DEPARTMENT
PART #: 4-03
SCALE: 4:1 SHEET: 35 OF 55
DIMENSIONS ARE IN MILLIMETERSTHIRD ANGLE PROJECTION
LINEAR:
X. .25X.X . 1X.XX .01X.XXX .002
DEFAULT TOLERANCES:
ANGULAR:
X. 2X.X 1X.XX 0 30'
SolidWorks Student Edition.
For Academic Use Only.
7/21/2019 drawing package pdf.PDF
http://slidepdf.com/reader/full/drawing-package-pdfpdf 36/55
5-01
5-03
5-04
5-025-05
5-06
5-07
Part # DESCRIPTION QTY. Sheet #5-01 Gear Box 1 37, 38
5-03 Idler Gear 1 395-04 Magneto Gear 1 405-02 Gear Box Cover 1 415-05 Name Plate 1 425-07 SHCS M - 2 x 0.4 x 8 4 -
10
Fantastic Four:The Barr & Stroud
Engine
FILE NAME: Gear box assembly exploded.SLDPRT
CHECKED BY:
DESCRIPTION: Gear Box Assembly
QTY: 1DRAWN BY: Richard Broaddus
DATE:
THE INFORMATION CONTAINED IN THIS DRAWINGIS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,ME DEPARTMENT. ANY REPRODUCTION IN PARTOR AS A WHOLE WITHOUT THE WRITTEN PERMISSIONOF UNIVERSITY OF IDAHO, ME DEPARTMENT ISPROHIBITED.
PROPRIETARY AND CONFIDENTIAL
MATERIAL: Brass & 1060 Alloy
DATE: 12/9/2011
UNIVERSITY OF IDAHO
ME DEPARTMENT
PART #: 5-00
SCALE: 1:1 SHEET: 36 OF 55
DIMENSIONS ARE IN MILLIMETERSTHIRD ANGLE PROJECTION
LINEAR:
X. .25X.X . 1X.XX .01X.XXX .002
DEFAULT TOLERANCES:
ANGULAR:
X. 2X.X 1X.XX 0 30'
SolidWorks Student Edition.
For Academic Use Only.
7/21/2019 drawing package pdf.PDF
http://slidepdf.com/reader/full/drawing-package-pdfpdf 37/55
44
2.25 THRUBA8
6 2 °
60 °
38
22
DD
73
9
5
2 .
5
2 .
5
SECTION D-D
Fantastic Four:The Barr & Stroud
Engine
FILE NAME: Gear Box (RB).SLDPRT
CHECKED BY:
DESCRIPTION: Gear Box
QTY: 1DRAWN BY: Richard Broaddus
DATE:
THE INFORMATION CONTAINED IN THIS DRAWINGIS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,ME DEPARTMENT. ANY REPRODUCTION IN PARTOR AS A WHOLE WITHOUT THE WRITTEN PERMISSIONOF UNIVERSITY OF IDAHO, ME DEPARTMENT ISPROHIBITED.
PROPRIETARY AND CONFIDENTIAL
MATERIAL: 1060 Alloy
DATE: 12/1/2011
UNIVERSITY OF IDAHO
ME DEPARTMENT
PART #: 5-01
SCALE: 3:2 SHEET: 37 OF 55
DIMENSIONS ARE IN MILLIMETERSTHIRD ANGLE PROJECTION
LINEAR:
X. .25X.X . 1X.XX .01X.XXX .002
DEFAULT TOLERANCES:
ANGULAR:
X. 2X.X 1X.XX 0 30'
SolidWorks Student Edition.
For Academic Use Only.
7/21/2019 drawing package pdf.PDF
http://slidepdf.com/reader/full/drawing-package-pdfpdf 38/55
2 x R4.5
2 x R1.5
4 x R4.5
19 THRU19 THRU
10 2.5
6 x 2.250 THRU BA8
R9.5 2.5
22
39.2
3
32
49
56.4
68
Fantastic Four:The Barr &
Stroud Engine
FILE NAME: Gear Box (RB).SLDPRT
CHECKED BY:
DESCRIPTION: Gear Box
QTY: 1DRAWN BY: Richard Broaddus
DATE:
THE INFORMATION CONTAINED IN THIS DRAWINGIS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,ME DEPARTMENT. ANY REPRODUCTION IN PARTOR AS A WHOLE WITHOUT THE WRITTEN PERMISSIONOF UNIVERSITY OF IDAHO, ME DEPARTMENT ISPROHIBITED.
PROPRIETARY AND CONFIDENTIAL
MATERIAL: 1060 Alloy
DATE: 12/1/2011
UNIVERSITY OF IDAHO
ME DEPARTMENT
PART #: 5-01
SCALE: 3:2 SHEET: 38 OF 55
DIMENSIONS ARE IN MILLIMETERSTHIRD ANGLE PROJECTION
LINEAR:
X. .25X.X . 1X.XX .01X.XXX .002
DEFAULT TOLERANCES:
ANGULAR:
X. 2X.X 1X.XX 0 30'
SolidWorks Student Edition.
For Academic Use Only.
7/21/2019 drawing package pdf.PDF
http://slidepdf.com/reader/full/drawing-package-pdfpdf 39/55
5
24
9
41
51
70
EE
2.5mm fillet
10
16
18
1
6
2.25
3.5
2 .
5
73
4 °
1
5 °
SECTION E-E
NOTE: The bolt pattern is the same as thegear box. Also the shape of the part isrelated to the gear box.
Fantastic Four:The Barr & Stroud
Engine
FILE NAME: Gear Box Cover (RB).SLDPRT
CHECKED BY:
DESCRIPTION: Gear Box Cover
QTY: 1DRAWN BY: Richard Broaddus
DATE:
THE INFORMATION CONTAINED IN THIS DRAWINGIS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,ME DEPARTMENT. ANY REPRODUCTION IN PARTOR AS A WHOLE WITHOUT THE WRITTEN PERMISSIONOF UNIVERSITY OF IDAHO, ME DEPARTMENT ISPROHIBITED.
PROPRIETARY AND CONFIDENTIAL
MATERIAL: 1060 Alloy
DATE: 12/1/2011
UNIVERSITY OF IDAHO
ME DEPARTMENT
PART #: 5-02
SCALE: 3:2 SHEET: 39 OF 55
DIMENSIONS ARE IN MILLIMETERSTHIRD ANGLE PROJECTION
LINEAR:
X. .25X.X . 1X.XX .01X.XXX .002
DEFAULT TOLERANCES:
ANGULAR:
X. 2X.X 1X.XX 0 30'
SolidWorks Student Edition.
For Academic Use Only.
7/21/2019 drawing package pdf.PDF
http://slidepdf.com/reader/full/drawing-package-pdfpdf 40/55
6 THRU
102.5
57.5
NOTE: DP=40 27-TPCD: 17.145 mm OD: 18.415 mm
Fantastic Four:The Barr & Stroud
Engine
FILE NAME: Idler Gear (PS).SLDPRT
CHECKED BY:
DESCRIPTION: Idler Gear
QTY: 1DRAWN BY: Phillip Spinden
DATE:
THE INFORMATION CONTAINED IN THIS DRAWINGIS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,ME DEPARTMENT. ANY REPRODUCTION IN PARTOR AS A WHOLE WITHOUT THE WRITTEN PERMISSIONOF UNIVERSITY OF IDAHO, ME DEPARTMENT ISPROHIBITED.
PROPRIETARY AND CONFIDENTIAL
MATERIAL: Brass
DATE: 12/6/2011
UNIVERSITY OF IDAHO
ME DEPARTMENT
PART #: 5-03
SCALE: 4:1 SHEET: 40 OF 55
DIMENSIONS ARE IN MILLIMETERSTHIRD ANGLE PROJECTION
LINEAR:
X. .25X.X . 1X.XX .01X.XXX .002
DEFAULT TOLERANCES:
ANGULAR:
X. 2X.X 1X.XX 0 30'
SolidWorks Student Edition.
For Academic Use Only.
7/21/2019 drawing package pdf.PDF
http://slidepdf.com/reader/full/drawing-package-pdfpdf 41/55
10
6 THRU 2.57
NOTE: DP=40 27-TPCD: 17.145 mm OD: 18.415 mm
Fantastic Four:The Barr & Stroud
Engine
FILE NAME: Magneto Gear (PS).SLDPRT
CHECKED BY:
DESCRIPTION: Magneto Gear
QTY: 1DRAWN BY: Phillip Spinden
DATE:
THE INFORMATION CONTAINED IN THIS DRAWINGIS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,ME DEPARTMENT. ANY REPRODUCTION IN PARTOR AS A WHOLE WITHOUT THE WRITTEN PERMISSIONOF UNIVERSITY OF IDAHO, ME DEPARTMENT ISPROHIBITED.
PROPRIETARY AND CONFIDENTIAL
MATERIAL: Brass
DATE: 12/1/2011
UNIVERSITY OF IDAHO
ME DEPARTMENT
PART #: 5-04
SCALE: 4:1 SHEET: 41 OF 55
DIMENSIONS ARE IN MILLIMETERSTHIRD ANGLE PROJECTION
LINEAR:
X. .25X.X . 1X.XX .01X.XXX .002
DEFAULT TOLERANCES:
ANGULAR:
X. 2X.X 1X.XX 0 30'
SolidWorks Student Edition.
For Academic Use Only.
7/21/2019 drawing package pdf.PDF
http://slidepdf.com/reader/full/drawing-package-pdfpdf 42/55
18
13 3
3 . 5
0.1
3 .
2
1
1
12.8
2.2
Fantastic Four:The Barr & Stroud
Engine
FILE NAME: Nameplate (RB).SLDPRT
CHECKED BY:
DESCRIPTION: Name Plate
QTY: 1DRAWN BY: Richard Broaddus
DATE:
THE INFORMATION CONTAINED IN THIS DRAWINGIS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,ME DEPARTMENT. ANY REPRODUCTION IN PARTOR AS A WHOLE WITHOUT THE WRITTEN PERMISSIONOF UNIVERSITY OF IDAHO, ME DEPARTMENT ISPROHIBITED.
PROPRIETARY AND CONFIDENTIAL
MATERIAL: 2618-T61 (SS)
DATE: 12/8/2011
UNIVERSITY OF IDAHO
ME DEPARTMENT
PART #: 5-05
SCALE: 3:1 SHEET: 42 OF 55
THIRD ANGLE PROJECTION
LINEAR:
X. .25X.X . 1X.XX .01X.XXX .002
DEFAULT TOLERANCES:
ANGULAR:
X. 2X.X 1X.XX 0 30'
DIMENSIONS ARE IN MILLIMETERS
SolidWorks Student Edition.
For Academic Use Only.
7/21/2019 drawing package pdf.PDF
http://slidepdf.com/reader/full/drawing-package-pdfpdf 43/55
6-046-08
6-09
6-03
6-10
6-06
6-01
6-02
6-08
6-05
Part # DESCRIPTION QTY. Sheet #6-01 Cylinder 1 446-02 Exhaust Manifold 1 456-03 Intake Manifold 1 466-04 Intake Flange 1 47
6-05 Exhaust Flange 1 486-06 Junk Head 1 496-07 Piston Ring 1 506-08 Studs Intake & Exhaust 2 516-09 2 x 0.4 x 8 Hex 2 -6-10 2 x 0.4 x 6 Hex 8 -
Fantastic Four:The Barr &
Stroud Engine
FILE NAME: (6) Cylinder_Manifolds_Assembly.SLDPRT
CHECKED BY:
DESCRIPTION: Cylinder Manifolds Assembly
QTY: 1DRAWN BY: Aaron Kitchen
DATE:
THE INFORMATION CONTAINED IN THIS DRAWINGIS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,ME DEPARTMENT. ANY REPRODUCTION IN PARTOR AS A WHOLE WITHOUT THE WRITTEN PERMISSIONOF UNIVERSITY OF IDAHO, ME DEPARTMENT ISPROHIBITED.
PROPRIETARY AND CONFIDENTIAL
MATERIAL: Assorted
DATE: 12/8/2011
UNIVERSITY OF IDAHO
ME DEPARTMENT
PART #: 6-00
SCALE: 1:2 SHEET: 43 OF 55
THIRD ANGLE PROJECTION
LINEAR:
X. .25X.X . 1X.XX .01X.XXX .002
DEFAULT TOLERANCES:
ANGULAR:
X. 2X.X 1X.XX 0 30'
DIMENSIONS ARE IN MILLIMETERS
SolidWorks Student Edition.
For Academic Use Only.
7/21/2019 drawing package pdf.PDF
http://slidepdf.com/reader/full/drawing-package-pdfpdf 44/55
5 5
1 .
5
5
1 .
5
2 4
A
8 x 2.8
2 2 .
5
1 4
1 3 .
5
44
30 - 40 tpi
24
R1.2
4.8
7
R5.7
R0.7R2
DETAIL ASCALE 5 : 1
Fantastic Four:The Barr & Stroud
Engine
FILE NAME: Cylinder (AK).SLDPRT
CHECKED BY:
DESCRIPTION: Cylinder
QTY: 1DRAWN BY: Aaron Kitchen
DATE:
THE INFORMATION CONTAINED IN THIS DRAWINGIS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,ME DEPARTMENT. ANY REPRODUCTION IN PARTOR AS A WHOLE WITHOUT THE WRITTEN PERMISSIONOF UNIVERSITY OF IDAHO, ME DEPARTMENT ISPROHIBITED.
PROPRIETARY AND CONFIDENTIAL
MATERIAL: Gray Cast Iron
DATE: 12/8/2011
UNIVERSITY OF IDAHO
ME DEPARTMENT
PART #:6-01
SCALE: 1:1 SHEET: 44 OF 55
DIMENSIONS ARE IN MILLIMETERSTHIRD ANGLE PROJECTION
LINEAR:
X. .25X.X . 1X.XX .01X.XXX .002
DEFAULT TOLERANCES:
ANGULAR:
X. 2X.X 1X.XX 0 30'
SolidWorks Student Edition.
For Academic Use Only.
7/21/2019 drawing package pdf.PDF
http://slidepdf.com/reader/full/drawing-package-pdfpdf 45/55
2 x 2.2,TAP 6BA, 7.2
8.49
NOTE: All dimensions not noted arethe same as the Intake Manifold.
Fantastic Four:The Barr & Stroud
Engine
FILE NAME: Exhaust Manifold.SLDPRT
CHECKED BY:
DESCRIPTION: Exhaust Manifold
QTY: 1DRAWN BY: Aaron Kitchen
DATE:
THE INFORMATION CONTAINED IN THIS DRAWINGIS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,ME DEPARTMENT. ANY REPRODUCTION IN PARTOR AS A WHOLE WITHOUT THE WRITTEN PERMISSIONOF UNIVERSITY OF IDAHO, ME DEPARTMENT ISPROHIBITED.
PROPRIETARY AND CONFIDENTIAL
MATERIAL: 6061-T6 (SS)
DATE: 12/8/2011
UNIVERSITY OF IDAHO
ME DEPARTMENT
PART #: 6-02
SCALE: 1:2 SHEET: 45 OF 55
DIMENSIONS ARE IN MILLIMETERSTHIRD ANGLE PROJECTION
LINEAR:X. .25X.X . 1X.XX .01X.XXX .002
DEFAULT TOLERANCES:
ANGULAR:X. 2X.X 1X.XX 0 30'
SolidWorks Student Edition.
For Academic Use Only.
7/21/2019 drawing package pdf.PDF
http://slidepdf.com/reader/full/drawing-package-pdfpdf 46/55
49
42
36
8.490
10 7
R3.5
1 .
5 7
3 .
1 4
4 .
7 1
9 .
4 3
1 1
1 2 .
5 7
1 4 .
1 4
R14R18
7
Fantastic Four:The Barr & Stroud
Engine
FILE NAME: Intake Manifold.SLDPRT
CHECKED BY:
DESCRIPTION: Intake Manifold
QTY: 1DRAWN BY: Aaron Kitchen
DATE:
THE INFORMATION CONTAINED IN THIS DRAWINGIS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,ME DEPARTMENT. ANY REPRODUCTION IN PARTOR AS A WHOLE WITHOUT THE WRITTEN PERMISSIONOF UNIVERSITY OF IDAHO, ME DEPARTMENT ISPROHIBITED.
PROPRIETARY AND CONFIDENTIAL
MATERIAL: 6061-T6 (SS)
DATE: 12/8/2011
UNIVERSITY OF IDAHO
ME DEPARTMENT
PART #: 6-03
SCALE: 2:1 SHEET: 46 OF 55
DIMENSIONS ARE IN MILLIMETERSTHIRD ANGLE PROJECTION
LINEAR:X. .25X.X . 1X.XX .01X.XXX .002
DEFAULT TOLERANCES:
ANGULAR:X. 2X.X 1X.XX 0 30'
SolidWorks Student Edition.
For Academic Use Only.
7/21/2019 drawing package pdf.PDF
http://slidepdf.com/reader/full/drawing-package-pdfpdf 47/55
1
2 x 1.95
2 x R2.78
7.5
R6.510
Fantastic Four:The Barr & Stroud
Engine
FILE NAME: Flanges_Intake&Exhaust_1.95 (AK).SLDPRT
CHECKED BY:
DESCRIPTION: Intake Flange
QTY: 1DRAWN BY: Aaron Kitchen
DATE:
THE INFORMATION CONTAINED IN THIS DRAWINGIS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,ME DEPARTMENT. ANY REPRODUCTION IN PARTOR AS A WHOLE WITHOUT THE WRITTEN PERMISSIONOF UNIVERSITY OF IDAHO, ME DEPARTMENT ISPROHIBITED.
PROPRIETARY AND CONFIDENTIAL
MATERIAL: Brass
DATE: 12/8/2011
UNIVERSITY OF IDAHO
ME DEPARTMENT
PART #: 6-04
SCALE: 2:1 SHEET: 47 OF 55
DIMENSIONS ARE IN MILLIMETERSTHIRD ANGLE PROJECTION
LINEAR:X. .25X.X . 1X.XX .01X.XXX .002
DEFAULT TOLERANCES:
ANGULAR:X. 2X.X 1X.XX 0 30'
SolidWorks Student Edition.
For Academic Use Only.
7/21/2019 drawing package pdf.PDF
http://slidepdf.com/reader/full/drawing-package-pdfpdf 48/55
2 x 2.5
NOTE: All dimensions not noted arethe same as the Intake Flange.
Fantastic Four:The Barr & Stroud
Engine
FILE NAME: Flanges_Intake&Exhaust_2.55 (AK).SLDPRT
CHECKED BY:
DESCRIPTION: Exhaust Flange
QTY: 1DRAWN BY: Aaron Kitchen
DATE:
THE INFORMATION CONTAINED IN THIS DRAWINGIS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,ME DEPARTMENT. ANY REPRODUCTION IN PARTOR AS A WHOLE WITHOUT THE WRITTEN PERMISSIONOF UNIVERSITY OF IDAHO, ME DEPARTMENT ISPROHIBITED.
PROPRIETARY AND CONFIDENTIAL
MATERIAL: Brass
DATE: 12/8/2011
UNIVERSITY OF IDAHO
ME DEPARTMENT
PART #: 6-05
SCALE: 2:1 SHEET: 48 OF 55
DIMENSIONS ARE IN MILLIMETERSTHIRD ANGLE PROJECTION
LINEAR:X. .25X.X . 1X.XX .01X.XXX .002
DEFAULT TOLERANCES:
ANGULAR:X. 2X.X 1X.XX 0 30'
SolidWorks Student Edition.
For Academic Use Only.
7/21/2019 drawing package pdf.PDF
http://slidepdf.com/reader/full/drawing-package-pdfpdf 49/55
21
19
24
35
1
2
1 4
1 5
1 6 .
5
1 8 R8.5
36
14
10
5.41 THRU
8 X 2.8
Fantastic Four:The Barr & Stroud
Engine
FILE NAME: Junk Head (AK).SLDPRT
CHECKED BY:
DESCRIPTION: Junk Head
QTY: 1DRAWN BY: Aaron Kitchen
DATE:
THE INFORMATION CONTAINED IN THIS DRAWINGIS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,ME DEPARTMENT. ANY REPRODUCTION IN PARTOR AS A WHOLE WITHOUT THE WRITTEN PERMISSIONOF UNIVERSITY OF IDAHO, ME DEPARTMENT ISPROHIBITED.
PROPRIETARY AND CONFIDENTIAL
MATERIAL: 6061-T6 (SS)
DATE: 12/1/2011
UNIVERSITY OF IDAHO
ME DEPARTMENT
PART #: 6-06
SCALE: 2:1 SHEET: 49 OF 55
DIMENSIONS ARE IN MILLIMETERSTHIRD ANGLE PROJECTION
LINEAR:X. .25X.X . 1X.XX .01X.XXX .002
DEFAULT TOLERANCES:
ANGULAR:X. 2X.X 1X.XX 0 30'
SolidWorks Student Edition.
For Academic Use Only.
7/21/2019 drawing package pdf.PDF
http://slidepdf.com/reader/full/drawing-package-pdfpdf 50/55
2421.936
1
Fantastic Four:The Barr & Stroud
Engine
FILE NAME: Ring_Piston&JunkHead (AK).SLDPRT
CHECKED BY:
DESCRIPTION: Piston Ring
QTY: 1DRAWN BY: Aaron Kitchen
DATE:
THE INFORMATION CONTAINED IN THIS DRAWINGIS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,ME DEPARTMENT. ANY REPRODUCTION IN PARTOR AS A WHOLE WITHOUT THE WRITTEN PERMISSIONOF UNIVERSITY OF IDAHO, ME DEPARTMENT ISPROHIBITED.
PROPRIETARY AND CONFIDENTIAL
MATERIAL: BUTYL
DATE: 12/1/2011
UNIVERSITY OF IDAHO
ME DEPARTMENT
PART #: 6-07
SCALE: 2:1 SHEET: 50 OF 55
DIMENSIONS ARE IN MILLIMETERSTHIRD ANGLE PROJECTION
LINEAR:X. .25X.X . 1X.XX .01X.XXX .002
DEFAULT TOLERANCES:
ANGULAR:X. 2X.X 1X.XX 0 30'
SolidWorks Student Edition.
For Academic Use Only.
7/21/2019 drawing package pdf.PDF
http://slidepdf.com/reader/full/drawing-package-pdfpdf 51/55
1 4
M10 down 4
108
Fantastic Four:The Barr & Stroud
Engine
FILE NAME: Studs_Intake&Exhaust (AK).SLDPRT
CHECKED BY:
DESCRIPTION: Studs Intake & Exhaust
QTY: 1DRAWN BY: Aaron Kitchen
DATE:
THE INFORMATION CONTAINED IN THIS DRAWINGIS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,ME DEPARTMENT. ANY REPRODUCTION IN PARTOR AS A WHOLE WITHOUT THE WRITTEN PERMISSIONOF UNIVERSITY OF IDAHO, ME DEPARTMENT ISPROHIBITED.
PROPRIETARY AND CONFIDENTIAL
MATERIAL: Alloy Steel
DATE: 12/1/2011
UNIVERSITY OF IDAHO
ME DEPARTMENT
PART #: 6-08
SCALE: 2:1 SHEET: 51 OF 55
DIMENSIONS ARE IN MILLIMETERSTHIRD ANGLE PROJECTION
LINEAR:X. .25X.X . 1X.XX .01X.XXX .002
DEFAULT TOLERANCES:
ANGULAR:X. 2X.X 1X.XX 0 30'
SolidWorks Student Edition.
For Academic Use Only.
7/21/2019 drawing package pdf.PDF
http://slidepdf.com/reader/full/drawing-package-pdfpdf 52/55
7-03
7-02
7-01
Part # DESCRIPTION QTY. SHEET #7-02 Sleeve Crank Pin Collar 1 537-01 Sleeve 1 547-03 Universal Ball 1 55
Fantastic Four:The Barr & Stroud
Engine
FILE NAME: Sleeve, Cam Peices Assembly exploded
CHECKED BY:
DESCRIPTION: Sleeve, Cam Peices Assembly
QTY: 1DRAWN BY: Brian Zaladonis
DATE:
THE INFORMATION CONTAINED IN THIS DRAWINGIS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,ME DEPARTMENT. ANY REPRODUCTION IN PARTOR AS A WHOLE WITHOUT THE WRITTEN PERMISSIONOF UNIVERSITY OF IDAHO, ME DEPARTMENT ISPROHIBITED.
PROPRIETARY AND CONFIDENTIAL
MATERIAL: Assorted
DATE: 11/26/2011
UNIVERSITY OF IDAHO
ME DEPARTMENT
PART #: 7-00
SCALE: 1:1 SHEET: 52 OF 55
DIMENSIONS ARE IN MILLlMETERSTHIRD ANGLE PROJECTION
LINEAR:X. .25X.X . 1X.XX .01X.XXX .002
DEFAULT TOLERANCES:
ANGULAR:X. 2X.X 1X.XX 0 30'
SolidWorks Student Edition.
For Academic Use Only.
7/21/2019 drawing package pdf.PDF
http://slidepdf.com/reader/full/drawing-package-pdfpdf 53/55
6 2
6
B
Threaded 40 TPI
22 THRU
24
7
3
6
5 .
1
R0.7
R1.2
R5.7
DETAIL BSCALE 5 : 1
Fantastic Four:The Barr & Stroud
Engine
FILE NAME: Sleeve (AK).SLDPRT
CHECKED BY:
DESCRIPTION: Sleeve
QTY: 1DRAWN BY: Aaron Kitchen
DATE:
THE INFORMATION CONTAINED IN THIS DRAWINGIS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,ME DEPARTMENT. ANY REPRODUCTION IN PARTOR AS A WHOLE WITHOUT THE WRITTEN PERMISSIONOF UNIVERSITY OF IDAHO, ME DEPARTMENT ISPROHIBITED.
PROPRIETARY AND CONFIDENTIAL
MATERIAL: Cast Carbon Steel
DATE: 11/22/2011
UNIVERSITY OF IDAHO
ME DEPARTMENT
PART #: 7-01
SCALE: 1:1 SHEET: 53 OF 55
DIMENSIONS ARE IN MILLIMETERSTHIRD ANGLE PROJECTION
LINEAR:X. .25X.X . 1X.XX .01X.XXX .002
DEFAULT TOLERANCES:
ANGULAR:X. 2X.X 1X.XX 0 30'
SolidWorks Student Edition.
For Academic Use Only.
7/21/2019 drawing package pdf.PDF
http://slidepdf.com/reader/full/drawing-package-pdfpdf 54/55
R10
24 THRU ALL
R18
NOTE: Threaded 40 TPI
R134
6
1
Fantastic Four:The Barr & Stroud
Engine
FILE NAME: Sleeve Crank Pin Collar(BZ).SLDPRT
CHECKED BY:
DESCRIPTION: Sleeve Crank Pin Collar
QTY: 1DRAWN BY: Brian Zaladonis
DATE:
THE INFORMATION CONTAINED IN THIS DRAWINGIS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,ME DEPARTMENT. ANY REPRODUCTION IN PARTOR AS A WHOLE WITHOUT THE WRITTEN PERMISSIONOF UNIVERSITY OF IDAHO, ME DEPARTMENT ISPROHIBITED.
PROPRIETARY AND CONFIDENTIAL
MATERIAL: Alloy Steel
DATE: 11/26/2011
UNIVERSITY OF IDAHO
ME DEPARTMENT
PART #: 7-02
SCALE: 1:1 SHEET: 54 OF 55
DIMENSIONS ARE IN MILLIMETERSTHIRD ANGLE PROJECTION
LINEAR:X. .25
X.X . 1X.XX .01X.XXX .002
DEFAULT TOLERANCES:
ANGULAR:X. 2
X.X 1X.XX 0 30'
SolidWorks Student Edition. For Academic Use Only.
7/21/2019 drawing package pdf.PDF
http://slidepdf.com/reader/full/drawing-package-pdfpdf 55/55
6
R6
6 THRU
12
Fantastic Four: The Barr & Stroud
Engine
CHECKED BY:
DESCRIPTION: Universal Ball
QTY: 1DRAWN BY: Brian Zaladonis
DATE:
THE INFORMATION CONTAINED IN THIS DRAWINGIS THE SOLE PROPERTY OF UNIVERSITY OF IDAHO,ME DEPARTMENT. ANY REPRODUCTION IN PARTOR AS A WHOLE WITHOUT THE WRITTEN PERMISSIONOF UNIVERSITY OF IDAHO, ME DEPARTMENT ISPROHIBITED.
PROPRIETARY AND CONFIDENTIAL
MATERIAL: Aluminum Bronze
DATE: 11/26/2011
UNIVERSITY OF IDAHO
ME DEPARTMENT
PART #: 7-03
DIMENSIONS ARE IN MILLIMETERSTHIRD ANGLE PROJECTION
LINEAR:X. .25
X.X . 1
DEFAULT TOLERANCES:
ANGULAR:X. 2
X.X 1
SolidWorks Student Edition. For Academic Use Only.