dr. mopper series anodized aluminum patterns composite...

2
Composite Instruments No stick, no pull, no kidding. TM CARE INSTRUCTIONS XP TECHNOLOGY TM Care Do use cassettes for cleaning and storage Do use clean cloth to wipe away resin or other debris after use Cleaning Do promptly place instruments in ultrasonic cleaner* Do use Ph-balanced cleaners Do always rinse with demineralized water after ultrasonic cleaning Avoid use of Chlorine, Chloride, NaCl , and Fluoride based solutions Sterilization Do dry instruments before sterilization Do use autoclave and follow manufacturer’s recommendations Do allow for complete drying cycle Storing Do thoroughly dry before storing *Standard recommended cleaning cycle is 20 minutes 6575 Butler Creek Road, Missoula, MT 59808 (406) 549-7451 Toll Free: (800) 551-5172 FAX (406) 549-7452 www.am-eagle.com [email protected] Standard Coated Instrument Composite sticks to microparticles XP Technology TM Instrument XP Technology TM gives you a defect-free surface XP Technology TM is a patented surface engineering process, in which the instrument’s surface is enhanced. This gives our instruments the properties of a much more durable material. DR. MOPPER SERIES ANODIZED ALUMINUM PATTERNS Composite F6 AECF6A Paddle/Plugger Composite D3 AED3A Paddle/Plugger Composite F5 AECF5A Paddle/Plugger Composite F4 AECFA Paddle/Paddle Composite NYU AECFNYUAP Paddle/Acorn 26-30 Ball-Football AEB26-30BFTN AEB26-30BFTNZ Posterior Super Plugger M/L AEC/PMSPMLTN AEC/PMSPMLTNZ Posterior IPC-L Interproximal Carver (long) AECAIPCLTN AECAIPCLTNZ Anterior M-1 Ball Burnisher AEBM1TN AEBM1TNZ Posterior 8A Carver AECA8ATN AECA8ATNZ Anterior IPC -T Interproximal (thin) AECAIPCTTN AECAIPCTTNZ Anterior Super Plugger S/M AEC/PMSPSMTN AEC/PMSPSMTNZ Posterior 8A Long Carver AECA8ALTN AECA8ALTNZ Anterior Microparticles Featuring:

Upload: others

Post on 07-Jul-2020

5 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: DR. MOPPER SERIES ANODIZED ALUMINUM PATTERNS Composite …am-eagle.com/assets/documents/Compositebrochure.pdf · 2014-06-25 · class 3 and 4 restorations AEC5TNZ Composite #5 For

Composite InstrumentsNo stick, no pull, no kidding.TM

CARE INSTRUCTIONS

XP TECHNOLOGYTM

CareDo use cassettes for cleaning and storageDo use clean cloth to wipe away resin or other debris after use

CleaningDo promptly place instruments in ultrasonic cleaner*Do use Ph-balanced cleanersDo always rinse with demineralized water after ultrasonic cleaningAvoid use of Chlorine, Chloride, NaCl , and Fluoride based solutions

SterilizationDo dry instruments before sterilizationDo use autoclave and follow manufacturer’s recommendationsDo allow for complete drying cycle

StoringDo thoroughly dry before storing

*Standard recommended cleaning cycle is 20 minutes

6575 Butler Creek Road, Missoula, MT 59808(406) 549-7451 Toll Free: (800) 551-5172

FAX (406) 549-7452www.am-eagle.com

[email protected]

Standard Coated Instrument

Composite sticks to microparticles

XP TechnologyTM Instrument

XP TechnologyTM gives you a defect-free surface

XP TechnologyTM is a patented surface engineering process, in which the instrument’s surface is enhanced. This gives our instruments the properties of a much more durable material.

DR. MOPPER SERIES ANODIZED ALUMINUM PATTERNS

Composite F6 AECF6APaddle/Plugger

Composite D3 AED3APaddle/Plugger

Composite F5 AECF5A

Paddle/Plugger

Composite F4 AECFAPaddle/Paddle

Composite NYUAECFNYUAP

Paddle/Acorn

26-30 Ball-FootballAEB26-30BFTNAEB26-30BFTNZPosterior

Super Plugger M/LAEC/PMSPMLTNAEC/PMSPMLTNZPosterior

IPC-L Interproximal Carver (long)AECAIPCLTN

AECAIPCLTNZAnterior

M-1 Ball BurnisherAEBM1TN

AEBM1TNZPosterior

8A CarverAECA8ATNAECA8ATNZAnterior

IPC -T Interproximal (thin)AECAIPCTTNAECAIPCTTNZAnterior

Super Plugger S/MAEC/PMSPSMTN

AEC/PMSPSMTNZPosterior

8A Long CarverAECA8ALTN

AECA8ALTNZAnterior

Microparticles

Featuring:

Page 2: DR. MOPPER SERIES ANODIZED ALUMINUM PATTERNS Composite …am-eagle.com/assets/documents/Compositebrochure.pdf · 2014-06-25 · class 3 and 4 restorations AEC5TNZ Composite #5 For

DR. JACKSON SERIES

DR. COLONNA SERIES

Dr. Colonna’s instrument series is designed specially for use in micro-dental preparations. Micro-spoon excavators are precisely designed and are strong enough to remove decay in the smallest of micro-dental preparations.

Dr. Jackson’s instrument series is designed specially for posterior composite placement. The round-ended pluggers with thin opposing blades are for rapid packing, pressing and shaping. The unique RJ 3 instrument offers two short, very thin blades that allow for precise final occlusal contouring.

“- Dr. Ron Jackson

I don’t think there are better composite instruments in the marketplace. The new XP instruments by American Eagle have taken it to a new level.

Composite RJ 3 Mini XPAECRJ3MTNZ

Composite RJ 2 XPAECRJ2TNZRound-ended plugger/paddle

Composite RJ 1 Mini XPAECRJ1MTNZShort, thin blades

Composite RJ 1 XPAECRJ1TNZRound-end plugger/paddle

Carver Gregg 4-5 XPAECAG4-5TNZOffset blades for sculpting

Acorn CarverAEMCB21ATNZAcorn carver for packingcomposite prior to curing

Micro-Spoon Excavator #4AEMCEXC4TNZSmall ended spoon excavator, easy removal of decay

Micro-Spoon Excavator #5AEMCEXC5TNZSmall ended spoon excavator, different shank angles

Micro-Spoon Excavator #6AEMCEXC6TNZLarger spoon excavator for bulk decay removal

Condenser/Plugger 0AEMCC/P0TNZCondenser/Plugger with two end sizes for initial packing of posterior composites

Condenser/Plugger 1AEMCC/P1TNZ

Smaller Condenser/Plugger for smaller preparations

Condenser/Plugger 2AEMCC/P2TNZ

Very small Condenser/Pluggerto fit in micro dental preparations

Shepherd’s Hook ExplorerAEMCEXP5TNZ

Shepherd’s hook explorer with to check your final polish

on restorations

Interproximal CarverAEMCCAIPTNZ

Thinner interproximal carver for composite material placement

POPULAR PATTERNS

AEC1TNZComposite #1Sharp Acorn/Spear

AEC2TNZComposite #2Plugger/Sharp Paddle

AEC3TNZComposite #3Sharp Paddle/Sharp Paddle

AEC4TNZComposite #4Medium sized blades facilitate placement of composite materials in full veneer bonding class 3 and 4 restorations

AEC5TNZComposite #5For contouring small class 1, 2 and 5 restorations

AEC6TNZComposite #6For contouring small class 1, 2 and 5 restorations

AEC7TNZComposite #7The convex plugger tip helps minimize any pullback of composite material as it is placed into the tooth preparation

AEC9TNZComposite #9Paddle/Paddle

AEC6-21ATNZComposite #6-21APaddle/Acorn