dr. hari vasudevandjsce.ac.in/common/uploads/contenttemplate/complete faculty with hv sir.pdf ·...

Name: Dr. Hari Vasudevan

Principal

Professor and Head of the Dept. of Production Engg.

Ph.D (Indian Institute of Technology Bombay) M.E. Production Engg. (VJTI) Post-Graduate Diploma in Industrial Engg. (VJTI) B.E. Industrial Production (GIT)

Date of Birth:

29-5-1969

Education Qualifications:

Doctor of Philosophy (Ph.D), Indian Institute of Technology Bombay.

M.E. (Production Engg), 1st class with distinction, VJTI, Mumbai University.

Post-Graduate Diploma in Industrial Engg., 1 st class, VJTI, Mumbai University.

B.E. (Industrial Production), 1 st class, GIT, Karnatak University.

Full Time Certificate Programme (ERP-BaaN), S.P.Jain Institute of Management & Research, Mumbai under the University Synergy Programme of BaaN Institute, Netherlands.

Area of Specializations:

Manufacturing Engineering, Manufacturing Systems & Strategy, Market Orientation of Manufacturing Firms and World Class Manufacturing.

Subjects taught- Under Graduate Level:

Manufacturing Engineering, Production & Operations Management.

Post Graduate Level:

World Class Manufacturing, Manufacturing Strategy, Research Methodology.

Approved PhD Guide:

Field: Mechanical Engineering: University:- NMIMS(Deemed to be University).

PhDs Guided: 01. Title of the Research Work “Exploring Product Cannibalisation and Benefits of Remanufacturing in the Context of a Remanufactured and its counterpart new product” by Dr. Ravi Terkar. Presently guiding 4 students at the DJSCE Research Centre, University of Mumbai and 1 student at NMIMS (Deemed to be University).

Approved PG Guide:

Field: Mechanical Engineering: University:- University of Mumbai.

PG Projects Guided:

12. M. E. (Mechanical Engineering) Projects of University of Mumbai.

Professional Memberships:

Life Member of ISTE, New Delhi, Fellow of ISME, Senior Member: IEDRC.

Interaction with Professional Institutions:

President of the Indian Society of Manufacturing Engineers (ISME); Member of Alumni Associations of GIT, NITIE, VJTI & IIT Bombay.

Work Experience: Teaching

1. Principal, Dwarkadas J. Sanghvi College of Engineering from 9-2-2009 till date.

2. Vice-Principal, Dwarkadas J. Sanghvi College of Engineering from 17-7-2007 to 08-02-2009 and Convener, Training & Placement Cell from 1-6-2007 to 17-7-2008.

3. Professor in Production Engineering, Dwarkadas J. Sanghvi College of Engineering from 16-7-2007 till date and Head of the Department of Production Engineering from 01-07-2008 till date.

4. Assistant Professor in Production Engineering, Dwarkadas J. Sanghvi College of Engineering from 31-7-2003 to 15-7-2007 and Lecturer in Production Engineering from 17-8-1994 to 30-7-2003.

5. Lecturer, Dept. of Mechanical Engineering., S.B.M. Polytechnic from July 1993 to August 94.

6. Lecturer, Dept. of Mechanical Engineering., Fr. Agnel Polytechnic from June 1992 to July 1993.

Research and Industry:

1. Production Engineer, Crompton Greaves Limited, Kanjur Marg, Mumbai from August, 1997 to November, 1998.

2. Trainee Engineer, PAM Pharmaceuticals and Allied Machinery Co. Ltd., Kandivali, Mumbai from June, 1997 to July, 1997.

3. Production Planning Engineer, Hercules Hoists Ltd., Mulund, Mumbai from January, 1995 to November, 1995.

4. Production Planning Engineer, Plastic Art /Shalimar Plastic Industries, Mumbai from July 1990 to June 1992.

Others: 1. Member of the Board of Studies in Mechanical/Production/ Automobile/Marine Engineering of the University of Mumbai and Convener, Syllabus revision committee in Production Engineering from the year 2006.

2. Visiting Faculty at Veermata Jijabai Technological Institute (VJTI), teaching M.Tech. (Production Engg.) students the subject of Supply Chain Management during January - May2008.

3. Visiting faculty at NMIMS University‟s MPSTME, teaching subjects like “World Class Manufacturing” and “Manufacturing Systems & Strategy” for the MBA (Tech) course during the academic years 2006-2007, 07-08, 08-09 & 09-10.

4. Visiting faculty at NMIMS University‟s MPSTME, Shirpur (Dhule) Campus teaching subjects like “Engineering Drawing” and “Material Science” for the MBA (Tech.) and B.Tech courses during the academic years 2007-2008 & 08-09.

Others: 5. Visiting faculty at Chetana‟s Ramprasad Khandelwal Institute of Management and Research, Bandra (E), Mumbai - 51 in the subject of Production Management for the academic year 1996-1997.

6. Visiting faculty at Shri Bhagubhai Mafatlal Polytechnic, Vile Parle (W), Mumbai during 1994-1996, teaching subjects such as Production Management, Work Study & Ergonomics and Engineering Drawing.

7. Mumbai University panel member for conducting group discussion and personal interview for the MMS admissions during 1996-1997 and 1997-1998 on behalf of Directorate of Technical Education, Maharashtra state.

8. Panel member at NMIMS University for conducting personal interview for the MBA (Technology) admissions during 2005-2006, 06-07, 07-08 & 08-09.

9. Visiting Faculty at SVKM‟s Institute of International Studies (IIS), teaching students of IIS and Kingston University, London for their graduate program, the subject of “Technology and Change” during academic year 2006-2007.

International Publications: Journal

1. “Optimization of Turning Process Parameters in the Machining of an Accumulator (MDN-250) using TAGHUCHI‟S DESIGN OF EXPERIMENTS” in the International Journal of Mechanical and Production Engineering, Vol-3, ISS - 5, May 2015 ISSN : 2320-2092, PP:75-78 (with Shreya Kadwadkar & Dharam Ranka)

2. “Grey Fuzzy Multiobjective Optimization of Process Parameters for CNC Turning of GFRP/Epoxy Composites”in the International Journal “Procedia Engineering” by ELSEVIER. Volumes 97, 2014, Pages 85-94 (with Naresh Deshpande and Ramesh Rajguru).

3. “Demystifying Knowledge Management in Indian Manufacturing SMEs”in the

International Journal “Procedia Engineering” by ELSEVIER. Volumes - 97, 2014 Pages 1724-1734. (with Chavan Anup).

4. “Multiobjective Optimization of Drilling Characteristics for NEMA G -11 GFRP/Epoxy

Composite using Desirability Coupled with Taguchi Method” in the International Journal “Procedia Engineering” by ELSEVIER. Volumes 97, 2014 Pages 522-530 (with Naresh Deshpande and Ramesh Rajguru).

5. “Knowledge Management Practices in Indian Manufacturing MSMEs: Challenges and

Opportunities” in the International Journal “Procedia Engineering” by ELSEVIER. Volumes 97, 2014, Pages 1784-1787 (with Chavan Anup).

6. “A study on Edge Milling Operation of NEMA G11 GFRP Composites based on Grey-

Taguchi method” published in the International Journal Applied Mechanics and Materials, (Volumes 592-594), pp.18-22, July 2014 - ISBN: 13: 978-3-03835-163-4 (with Ramesh Rajguru and Naresh Deshpande).

7. “Emerging Supplier Selection Criteria in the Context of Traditional Vs. Green Supply

Chain Management” in the International Journal of Managing Value and Supply Chains (IJMVSC), Vol.5, No.1, March 2014, pp.19-33, ISSN: 0976-979X (with Deshmukh Ashish).


8. “Exploring the performance of a Single Cylinder Diesel Engine with alternative fuels such as CME and CME-Diesel Blends” in the International Journal of Current Engineering and Technology, ISSN 2277-4106, 2014, InPressco International Press Corporation, Vol. 3, Issue 3 (with Sandip Mane, Deshpande Naresh and Rajguru Ramesh).

9. “Desirability Fuzzy Multiple Criteria Optimization of Process Parameters in CNC Turning of GFRP/Vinyl ester Composites” in the International Journal “Procedia Materials Science” by Elsevier, Volume: 5 (2014), pp.2458-2467 (with Deshpande Naresh and Rajguru Ramesh).

10. “Experimental Investigation and Otimization in Edge Milling of NEMA G-11 GFRP/Epoxy Composites” in the International Journal “Procedia Materials Science” by Elsevier, Volume: 5 (2014), pp.2105-2114. (with Rajguru Ramesh and Deshpande Naresh).

11. “Experimental Investigation and Otimization in Edge Milling of NEMA G-11 GFRP/Epoxy Composites” in the International Journal “Procedia Materials Science” by Elsevier, Volume: 5 (2014), pp.2105-2114. (with Rajguru Ramesh and Deshpande Naresh).

12. “Exploring the Potential of Remanufacturing in Indian Industries for Sustainability and Economic Growth” in the International Journal of Business Management and Research (IJBMR)‟, ISSN(P):2249-6920; ISSN(E):2249-8036. Trans Stellar Publications. Vol.4, Issue 1, pp: 25-38, February 2014, (with Kalamkar Vilas, Sunnapwar Vivek & Terkar Ravi).

13. “Validation and Installation of a Narrow belt Conveyor to Cater to High Throughput in FMCG Industries in the Indian Context” in the International Journal of Engineering Research and Development (IJERD), Vol.8, ISS.2, ISSN:2278-067X, P-ISSN:2278-800X, (August 2013), pp.39-48 (with Jobalia Binoy & Majgaonkar Vineet).

14. “Modeling Knowledge Management Barriers in the Indian Manufacturing SMEs Using ISM Approach” in the IUP Journal of Knowledge Management, Vol XI, No.4, pp 36-52, IUP Publications, October 2013 (with Chavan Anup).

15. “Investigation of the machinability characteristics of GFRP/ Vinyl ester composite using design of experiments” in the International Journal of Machining and Machinability of Materials, Vol.15, Nos. 3/4, pp.186-200, 2014 (with Deshpande Naresh and Rajguru Ramesh).

16. “Optimization of Injection Moulding Process Parameters in the Moulding of Low Density Polyethylene (LDPE)” in the International Journal of Engineering Research and Development (IJERD), Vol.7, ISS.5, e-ISSN: 2278-067X, p-ISSN:2278-800X, (June 2013), pp.35-39 (with Sajjankumar Lal).

17. “Enhancing Productivity through Cost and Lead Time Reduction in Remanufacturing” in the International Journal of Mechanical Engineering & Technology (IJMET), Vol.4, ISS.2, ISSN 0976-6340(P), ISSN 0976-6359(O), (March-April 2013), PP.286-297 (with Terkar Ravi and Kalamkar Vilas).

18. “Remanufacturing for Profitability and Green Growth sustainability: A Case Study of Printer Cartridge Sector in India” in the International Journal of Production Technology & Management (IJPTM), Vol.4, ISS.1, ISSN 0976-6383(P), ISSN 0976-6391(O), (January – April 2013), PP.17-30 (with Terkar Ravi and Kalamkar Vilas).

19. “Heat and Temperatures in Machining: Effects and Significance” in the International Journal: Advanced Materials Research Vols. 622-623 (2012), pp 1550-1553 (with Patil Rajesh and Kalamkar Vilas).


20. “Importance of Closed Loop Supply Chain in the Product Recovery Processes such as Remanufacturing” in the International Journal of Engineering Research and Applications (IJERA). ISSN 2248-9622. Special Issue - March 2012, pp 121-127 (with Ravi Terkar and Vilas Kalamkar).

21. “Remanufacturing for Sustainable Development: Challenges, Elements and Benefits” in the International Journal of Innovation, Management and Technology (IJIMT), February 2012, Vol. 3(1): pp: 84- 89, ISSN: 2010-0248 (with Ravi Terkar and Vilas Kalamkar).

22. “Market Orientation and Manufacturing Performance of Indian SMEs: Moderating Role of Firm Resources and Environmental Factors” European Journal of Marketing (ISSN: 0309-0566), Emerald in sight publications, Vol.45, ISS: 7/8, PP: 1172-1193, 2011 (with S.S. Gaur and Ajai S. Gaur).

23. “Importance of Innovative Product Launching and Product Life Cycle Management in small Scale Consumer Industries” in the International Journal of Computer Applications (IJCA), Number 3, (ISBN:978-93-80746-62-5), 2011 (with Ravi Terkar and Vivek Sunnapwar).

24. “Effect of Customer Orientation and Competitor Orientation on Small and Medium Scale Manufacturing Firm‟s Performance in Turbulent Markets” accepted for publication in the International Journal of Entrepreneurship and Small Business (IJESB), Inderscience Publishers (with Gaur S. S.).

25. “Relational Switching Costs, Satisfaction and Commitment: A Study in the Indian Manufacturing Context” in the Asia Pacific Journal of Marketing and Logistics (APJML), Emeraldinsight Publications, 2006, Vol.18, No.04 (Oct.) (with Gaur S.S. and Shinde R. K).

International Publications: Conference

1. “Utility Fuzzy Multicriteria Optimization of Process Parameters in CNC Turning of GFRP/ Vinyl ester Composites” presented and published in the ICMMM2014, International Colloquium on Materials, Manufacturing and Metrology, held at Indian Institute of Technology Madras, Chennai, during August 8-9, 2014 (with Naresh Deshpande and Ramesh Rajguru).

2. “Grey fuzzy optimization of milling parameters for G-11 GFRP/Epoxy composites with multiple performance characteristics” presented and published in the ICMMM2014, International Colloquium on Materials, Manufacturing and Metrology, held at Indian Institute of Technology Madras, Chennai, during August 8-9, 2014 (with Ramesh Rajguru and Naresh Deshpande).

3. “Multi Criteria Decision Making using Fuzzy Inference System: A Case in

Manufacturing” in the ICCICCT 2014 conference held at Noorul Islam centre for higher education Noorul Islam university Kumaracoil, Tamilnadu, India, during July 10-11, 2014, published in the IEEE Xplore Digital Library (with Naresh Deshpande and Ramesh Rajguru ).

4. “Utility Fuzzy Multiobjective Optimization of Process Parameters for CNC Turning of

GFRP/Epoxy Composites” in the 5th International and 26th All India Manufacturing Technology, Design and Research Conference - “AIMTDR 2014” being organized by the Department of Mechanical Engineering, IIT Guwahati, India from December 12-14, 2014 (with Naresh Deshpande, Ramesh Rajguru, Sandip Mane).


5. “Experimental Investigation and Optimization of Milling Parameters in the Machining of NEMA G -11 GFRP Composite Material using PCD Tool” in the 5th International and 26th All India Manufacturing Technology, Design and Research Conference - “AIMTDR 2014” being organized by the Department of Mechanical Engineering, IIT Guwahati, India from December 12-14, 2014 (with Ramesh Rajguru, Naresh Deshpande, Sandip Mane).

6. “An Experimental Investigation into the Optimization of Cutting Force in CNC Turning

of Woven Fabric based GFRP/Epoxy Composites using PCD Cutting Tool”, in the International Conference on Design, Manufacturing and Mechatronics (ICDMM-2014) organized by KJEI‟s Trinity College of Engineering and Research, Pune from 9th to 10th January 2014 (with Deshpande Naresh, Rajguru Ramesh).

7. “An Experimental Study on the Performance and Emission Characteristics of a Single

Cylinder Diesel Engine Using CME-Diesel Blends”, in the International Conference on Renewable Energy and Sustainable Development (ICRESD-2014) organized by KJEI‟s Trinity College of Engineering and Research, Pune from 9th to 10th January 2014 (with Mane Sandeep, Deshpande Naresh and Rajguru Ramesh).

8. “Analysis of a Multi-criteria optimization problem using Taguchi and Grey relational

analysis: A case study in the machining of composite materials” in the International Conference on Advances in Mechanical Engineering (ICAME), organized by the department of Mechanical Engineering, College of Engineering Pune, Maharashtra from 29th -31st May 2013 (with Ramesh Rajguru and Naresh Deshpande).

9. “Knowledge Management Barriers in Indian Manufacturing SEMs: Modeling using an Interpretive Structural Modeling Approach” in the International Conference on Business Intelligence, Analytics and Knowledge Management (BIAKM-2013) organized by IBS Hyderabad, IFHE University, Hyderabad, India from 17th to 19th April 2013 (with Chawan Anup). Received the best Research Paper Award during the Conference.

10. “Study of Cutting Force in CNC Turning of Woven Fabric based GFRP/Vinylester Composites using PCD Cutting Tool” in the International Conference on Advanced Manufacturing and Automation (INCAMA-2013) organised by the Department of Mechanical Engineering (DST-FIST Sponsored) Kalasalingam University, Madurai, Tamil Nadu from the 28th -30th March 2013 (with Naresh Deshpande and Ramesh Rajguru).

11. “Multi-criteria optimization using Taguchi and Grey relational analysis in CNC drilling of GFRP/E composite material” in the International Conference on Advanced Manufacturing and Automation (INCAMA-2013) organised by the Department of Mechanical Engineering(DST-FIST Sponsored) Kalasalingam University, Madurai, Tamil Nadu from the 28th -30th March 2013 (with Ramesh Rajguru and Naresh Deshpande).

12. “Recent Trends and Developments in the use of Woven Fabric Reinforcements for Composite Materials” in the International Conference on Innovations in Automation and Mechatronics Engineering 2013 (ICIAME2013), organised by G.H.Patel College of Engineering & Technology, Vallabh Vidyanagar, Gujarat, India, 21-23 February 2013 (with Deshpande N.C. & Rajguru Ramesh).

13. “Remanufacturing Benefits Versus Fear of Product Cannibalization: An Analysis of Recent Trends in the Indian Context”, in the International Conference on Agile Manufacturing-2012 (ICAM-2012) organized by the Mechanical Engineering Department, Indian Institute of Technology- BHU, Varanasi, December 16-19, 2012 (with Terkar Ravi & Kalmkar Vilas).


14. “Decision Criterion and Methods of Supplier Selection” in the International Conference on Recent Advances In Engineering, Technology And Management: SPICON 2012, organized by the Mechanical Engineering Department., SPCE, May 31st - June 2nd, 2012 (with Ashish Deshmukh).

15. “Importance of Remanufacturing Sector as a Secondary Market in India in view of Optimum Profit Life Cycle” in the International Conference on Recent Advances In Engineering, Technology And Management: SPICON 2012, organized by the Mechanical Engineering Department., SPCE, May 31st - June 2nd, 2012 (with R. Terkar and V.R. Kalamkar).

16. “Need for Product Cannibalization in Small Scale Manufacturing Industries through Product Life Cycle” in the International Conference on Industrial Engineering ICIE-2011) organized by Mechanical Engg. Dept., S.V.N.I.T., Surat, held during 17th - 19th November 2011 (with Ravi Terkar).

17. “Product Cannibalization due to Remanufacturing and its decisive strategies” in the International Conference on „Sustainable Manufacturing: Issues, Trends and Practices‟ (ICSM2011) organized by Mechanical Engg. Dept., BITS Pilani, held during 10th - 12th November 2011 (with Ravi Terkar and Vilas Kalamkar).

18. “Achieving Zero Defects at an Economically Affordable Cost” in the International Conference of Society of Operations Management (Nasik:Symbiosis Institute of Operations Management, Maharashtra, Dec., 2007) (with Sawan Kumar Naik).

19. “Market Orientation-Manufacturing Performance Relationship: An Empirical Study” in the International Conference-COSMAR (Bangalore: Indian Institute of Science, Karnataka, India, September, 2006).

20. “Vibration Analysis of an Assembly by Converting it into a Mass Spring System” in the International Conference on Advances in Materials Processing and Characterization (Chennai: Anna University, Tamil Nadu, India, August, 2006) (with Bhosale Ajith, Lakal Narendra and Khavekar Rajendra).

21. “Effect of Market Orientation on Manufacturing Performance of Emerging Market SMEs” in the Academy of Management Annual Meeting and Conference on Knowledge, Action and Public Concern (Atlanta: USA, Aug., 2006) (with Gaur, S. S. and Singh, D. A.).

22. “Influence of Environment, Resources and Market Orientation on Manufacturing Performance” in the American Marketing Association Annual Meeting and Summer Educator‟s Conference (Chicago: USA, Aug., 2006) (with Gaur S S. and Singh, D. A.).

23. “Market Orientation-Manufacturing Performance Relationship: Role of Firm Resources and External Environment” in the Academy of International Business Annual Meeting and Conference (Beijing: China, June, 2006) (with Gaur, S S. and Singh, D. A.).

24. “Effect of Market Turbulence and Market Focus on Firm‟s Performance in Small and Medium Scale Manufacturing Firms” in the International Seminar on Creating Entrepreneurship Environment and Developing Entrepreneurial Management (Mumbai: Indian Institute of Technology Bombay, India, Mar., 2006) (with Gaur, S. S.).

25. “Market Orientation and Manufacturing Outputs” in the AMS 12th Biennial World Marketing Congress (Muenster: University of Muenster, Germany, July, 2005) (with Gaur S. S.).


26. “A Review of the Determinants of Customer Loyalty” in the AMS 12th Biennial World Marketing Congress (Muenster: University of Muenster, Germany, July, 2005) (with Gaur S S. and Agarwal Richa).

27. “Exploring Relational Switching Cost-Commitment Link in Small and Medium Manufacturing Firms” in the International Conference on Marketing Paradigms for Emerging Economies (Ahmedabad: Indian Institute of Management Ahmedabad, Gujarat, India, January., 2005) (with Gaur S S. and Shinde R K.).

28. “Developing an Understanding of the Mid-Size Manufacturing Firms‟ Buying Behavior for ERP” in the International Conference on Indian Midsize Manufacturing Enterprises- „Opportunities and Challenges in a Global economy‟, jointly organized by MDI Gurgaon and Confederation of Indian Industry in New Delhi (Hotel Le Meridien) from 19-20, 2004 (with Gaur S S. and Kundu Protik).

Book Chapter: 1. “Perfect Product Launching strategies in the Context of Survival of Small Scale, Consumer Products Industries” Dr. Hari Vasudevan, in K. Shah, V.R. Lakshmi Gorty and A. Phirke (Eds.): ICTSM 2011, CCIS 145, pp.321-326, 2011, Springer“ Verlag Berlin Heidelberg 2011.

2. “Effect of Market Turbulence and Market Focus on Firm‟s Performance in Small and Medium Scale Manufacturing Firms” in S. Bhargava (ed.) IIT Bombay, Entrepreneurial Management, (Sage Publications), Feb. 2008 (with Gaur S.S.).

National Publications: Journal

1. “A Review of Machining Processes and Machinability in the case of GFRP Composite Materials” in the IPI Journal, the Official Publication of Indian Plastics Institute, Vol.18, ISS 03, August/September 2013 (with Rajguru Ramesh).

2. “Electron- Beam Curing of Polymeric Composites: An Enabling Technology for Advanced Manufacturing in the IPI Journal/Official Publication of Indian Plastic Institute, Vol.18, ISS.2, June/July 2013.

3. “Quality Improvement in the Manufacture of Air Circuit Breakers” Dr. Hari Vasudevan,

TECHNOFOCUS: Journal for Budding Engineers Vol.1 (2), 2011 (with Valia Akash).

4. “Press working of Composite Sheets: A Compound Die Design Approach” Dr. Hari

Vasudevan, TECHNOFOCUS: Journal for Budding Engineers Vol.1 (1), 2010 (with Phadnavis Vrushank).

5. “Understanding the Benefits and Need for Implementation of ERP in Small and Medium

Manufacturing Firms” in Voice of Technology, Indian Society of Manufacturing Engineers, 2004, Combined Issues 3 and 4, July/Sep and Oct/ Dec.

6. “Information & Communication” in Voice of Technology Indian Society of

Manufacturing Engineers, 2000, Issue 4, Oct/Dec.

Work Books: 1. Two Engineering Drawing Workbooks covering the syllabus of “Engineering Drawing-I” and “Engineering Drawing -II” for Semester 1 and 2 respectively of the University of Mumbai during the academic year 1996-1997.

National Publications: Conference

1. “Application of Knowledge Management in an Indian Automotive Industry” in the National Conference of Emerging Trends in Engineering „NCETE-13‟ during 4th & 5th January 2013, organized by M.H.Saboo Siddik College of Engineering, Byculla, Mumbai (with Chawan Anup).

2. “Delamination in Machining of Composite Materials: A Review in the Context of Drilling Operation” in the National Conference on Emerging Trends in Engineering „NCETE-13‟ during 4th & 5th January 2013, organized by M.H.Saboo Siddik College of Engineering, Byculla, Mumbai (with Rajguru Ramesh & Deshpande N.C.).

3. “Near Dry Machining- a minimum quantity lubrication machining” in the National

conference on Advances In Mechanical Engineering & Emerging Technologies (AMEET-12), organized by the Department of Mechanical Engineering, organized by Kamla Nehru Institute of Technology, Sultanpur form April 07-08, 2012 (with Rajesh Patil and V.R. Kalamkar).

4. “A Modified Approach in Precision Manufacturing by Abrasive Flow Machining” in the

National conference on Advances in Mechanical Engineering (Hyderabad: Vasavi College of Engineering, Andra Pradesh, India., May, 2005) (with Khavekar Rajendra, Lakal Narendra and Bhosale Ajit).

5. “Achieving Competitive Excellence in Contract processing in a Manufacturing Firm” in

the National Conference on World Class Manufacturing (Wardha: B. D. College of Engineering, Sevagram, Maharastra, India, March, 2004) (with Khavekar Rajendra and Lakal Narendra).

Reviewer: 1. Inderscience published International Journal of Environment and waste management.

2. Journal of Management, Social Science and Humanities, PEARL Research Journals Publication.

Programs Coordinated/ Chaired

Convenor and Reviewer of the International Conference on Advanced Computing technology and Applications. (ICACTA), held during 26th and 27th March, 2015 at The Club, Andheri (W), Mumbai.

Session Chairman (Mechanical Engineering) in the International Conference on “Emerging Trends in Technology and its Applications” (ICETTA-2014), organized by Yadavrao Tasgaonkar College of Engineering & Management, Karjat, from 7th – 8th March 2014.

Convenor of the International Conference on Communication Technologies (ICCT 2013)

organized by Dwarkadas J. Sanghvi College of Engineering during October 2013.

Member-Interactive Panel, Session titled “An Exchange between Science and Spirituality- Outer Space and Inner Space” in the SSTech 2012, ie the 2-Day National Conference on Science and Spirituality in the age of Technology held from October 05-06, 2012, organized by the University of Mumbai, India jointly with Dr. T. D. Singh‟s Institute of Science and Religion at the University of Mumbai campus, Kalina, Mumbai.

Programs Coordinated/ Chaired

Session Chairman in the International Conference on Recent Advances in Engineering, Technology and Management: SPICON 2012, organized by the Mechanical Engineering Department., SPCE from May 31st – June 2nd, 2012.

Session Chairman in the International Conference on „Sustainable Manufacturing: Issues, Trends and Practices‟ (ICSM2011) organized by the Mechanical Engg. Dept., BITS Pilani, from 10th – 12th November 2011.

Convener, National Conference on Communication Technology (NCCT 2011) organized by Dwarkadas J. Sanghvi College of Engineering during October 2011.

Organising Secretary, International Conference on Technology Systems and Management (ICTSM) organized by Dwarkadas J. Sanghvi College of Engineering jointly with MPSTME of NMIMS (Deemed to be university) during February 2011.

Vice Chairman, Asia Pacific Regional Conference in ICTM – 2010 organized by Dwarkadas J. Sanghvi College of Engineering jointly with MPSTME of NMIMS (Deemed to be university) during March 2010.

Session Chairman (Manufacturing/Automobile/Others): National Conference on

Recent Trends in Mechanical engineering (NCRTME-2010) organised by Datta Meghe College of Engineering, Airoli, Mumbai (August 2010).

Session Chairman National Conference on Advances in Mechanical Engineering (NCAME09), organized by the Mechanical Engineering department of MCT‟s Rajiv Gandhi Institute of Technology of Technology, Mumbai in Association with Bhabha Atomic Research Centre, Mumbai during 15-16th January 2009.

Organizing Committee member: National Conferences on Information and Communication Technology (NCICT) organized by Dwarkadas J Sanghvi College of Engineering during the years 2007, 2008 and 2009 as well as “Faculty Development Program” and “Seminar on Engineering Education: Challenges and Perspectives” approved by Indian Society for Technical Education at DJSCE from the 2nd to 6th January,2007.

Coordinator: Short Term Training Program on “Computer Aided Solutions for Engineering Application” recognized and approved by the Indian Society for Technical Education at DJSCE from 11th Dec‟2006 to 22nd Dec 2006.

Short Term Training Undergone/ Programs Attended

NITIE: 1. Just in Time for Indian Industries.

2. Production Management.

ISME/IIF:

1. Advances in Press Tool Design and Manufacturing.

2. Preparing Foundries for the Challenges Ahead.

3. National Seminar on Centre less Grinding.

4. International Conference on Advances in Manufacturing Technology.

5. National seminar on Metrology and Inspection.

6. High Tech Manufacturing.

ISTE : Trends and Advances in Machine Tools and Manufacturing.

NCQM: Three Keys for Business Excellence.

IIT : PAN-IIT Conferences at IIT Bombay and IIT Madras.

---------------------------------xxxxx----------------------------------

Name of Teaching Staff

Designation

Department

Date of Joining the

Institution

:

:

:

:

Mr. E. Narayanan

Mentor Professor (Adhoc)

Dept. of Production Engg.

18-9-1995

Qualification with Class /

Grade

: 1. B.Sc. (Physics), March 1963, University of Kerala. Pass

Class, 46.2%.

2. B.Sc. (Engg.) in Mechanical Engineering, May 1968,

University of Kerala, Second Class, 50.6%.

3. M.E. (Mech. Engg. with Plastics Engg.) October 1984,

University of Bombay. First Class, 68.6%.

Total Experience in

Years

:

Teaching:- 39 years

1. Head, Dept. of Plastics Engg., S.B. Polytechnic, from

9-7-1971 to 30-11-1993.

2. Asst. Professor of Production Engg. (Contract basis) D.J.

Sanghvi College of Engineering from 18.9.1995 to 7.4.1996.

3. Asst. Professor of Production Engineering D.J. Sanghvi

College of Engineering from 8-4-1996 to 17-10-2001.

4. Dean and Head of Dept. of Production Engg. D.J. Sanghvi


5. Professor & Head of Department of Production Engg. from

18-10-2001 to 30-4-2003.

6. Honorary Professor & Head of Department of Production

Engg. from 2-5-2003 to 30-4-2004, 2-5-2004 to

30-4-2005, 2-5-2005 to 29-4-2006, 1-7-2006 to 30-6-2007,

1-7-2007 to 30-6-2008.

7. Mentor Professor from 11-8-2008 till date.

Industry:

1. Inspection Engineer, Q.C. Dept. with International

Computers, Indian Manufacture Ltd., Pune.

2. Head, Customer Technical Services Cell of Industrial

Machinery Division, Larsen & Toubro Ltd., Mumbai

Papers Presented in

Conferences

: National ;--

1. 1985 – Presented a paper on “Threaded Fastening with

Plastics” during the Seminar on Fasteners organized by

Institution of Production Engineers at IIT, Mumbai.

2. 1986 – Presented a paper on “Designing with Plastics”

during a workshop on Industrial Design with Plastics, jointly

organized by Indian Plastics Institute & IIT, Mumbai.

3. 1987 – “Quality parameters for plastics processing” – News

Letter of National Centre for Quality Management Vol. 4,

No. 1& 2. This paper was earlier presented in a Top

Management Level Seminar for plastics processors,

organized by Organisation of Plastics processors of India,

Mumbai.

4. 1994 – Presented paper on “Trends in Injection Moulding

Machinery” during the National Seminar on “New Horizons

in Polymers”, Coimbatore.

5. 1995 – “Processing of Engineering Plastics – Current

Scenario and Futuristic Trends” – journal of Institution of

Engineers (India) Vol.76. This paper was earlier presented

at the Ninth National Convention of Metallurgist and

Material Scientist, Mumbai.

6. Presented a paper on “Trends and Advances in Tool Design

and Tool making” during the workshop on Plastics Mould

Design organized by Indian Society of Manufacturing

Engineer.

7. 1997 – Presented a paper on “Influence of Mould Design on

Mould Design on Product Performance Quality” during the

workshop organized by Indian Institute of Packaging and

Castrol (India) Ltd., Mumbai.

8. 1997 – Presented a paper on “Failure Mode and Effect

Analysis” during the workshop on Moulding Shop

Productivity organized by Indian Plastics Institute, Mumbai.

9. 1998 – Presented a key note address on “Trends in Tooling

Sector” during the National Conference on Mould Tech’98

organised by All India Plastics Manufacturer’s Association,

Mumbai.

10. 1998 – Made a presentation on “Product Designing with

Plastics” during the workshop on Plastics Engineering

organized by Crompton Greaves Ltd., Mumbai.

11. 2004- Made presentation on Injection Moulding & Blow

Moulding during international awareness programme on

Technology Trends & Developments in Packaging

Machinery & Systems to promote technology trade at SIES

School of Packaging, Navi Mumbai.

Professional

Memberships

: Fellowship of Academic bodies & Professional Societies

1. Fellow of Indian Plastics Institute.

2. Distinguished member & Fellow of Indian Society of

Manufacturing Engineers.

Membership of Scientific & Professional Societies

1. Life member of Indian Society for Technical Education.

2. Life member of Institution of Engineers (India).

Professional involvement

1. was elected Hon. Secretary of Indian Society of

manufacturing Engineers for about 10 years.

2. was elected Managing Committee Member of Indian Plastics

Institute, Mumbai Chapter for 25 years.

3. Treasurer for 2 years, Hon. Secretary for 2 years, Vice-

Chairman for 2 years and Chairman for 2 years of Indian

Plastics Institute, Mumbai Chapter.

4. Currently elected as Vice-President in the Presidential Board

of Indian Plastics Institute since 2008.

5. Rendered consultancy services to industries like Surgi Tools

Ltd., Prospect Electrical & Engg. Co., Polymoulds Ltd.,

Crompton Greaves Ltd., C.G. Lucy Ltd., CTR Ltd., Polyset

Plastics Ltd., Subir Precision Industries Pvt. Ltd., etc.

6. Has made key note address and paper presentation in various

national level seminars / conferences organized by

Professional societies.

7. Has designated & organized number of training programmes,

workshops & seminars on variety of topics like productivity

improvement, Tool Designing & Manufacture, Product

Designing, Trouble Shooting & Maintenance, Quality

Management, Manufacturing Processes etc.

8. Has rendered guidance and help to initiate and pursue

educational programme to various organizations /

institutions and other agencies like small scale industries

institute, Central Institute for Vocational Development &

Training, Bhopal, Private and Government Polytechnics,

Amruta Institute of Technology, Coimbatore , Maharashtra

Institute of Technology, Pune, Indian Institute of Packaging,

Indian Plastics Institute and so on.

9. Has rendered services as visiting faculty to undergraduate &

postgraduate courses of University of Mumbai and Pune,

Indian Institute of Packaging, Mumbai and SIES School of

Packaging, Navi Mumbai.

:

Awards

: Meritorious service award from Indian Plastics Institute for

outstanding service rendered for the cause of Industry &

Education.


Designation

Department

Date of Joining the

Institution

:

:

:

:

Mr. Naresh C. Deshpande

Assistant Professor


01.07.1997

Qualifications with Class /

Grade

: (1) PhD (Mechanical Engg.) Pursuing.

(2) M.E. (Mechanical Engg.), Dec. 2013, Ist class with

distinction, 70.86%, Mumbai university.

(3) B.E. (Production Engg.), May 1994, Ist class with

distinction, 77.02%, Dr. Babasaheb Ambedkar

Marathwada University Aurangabad. 1st Rank in

University.

Total Experience in Years

: Teaching: 18 years

1. Assistant Professor in Production Engg. From 1-1-2006

till date.

2. Lecturer (Sr.Scale) in Prodn. Engg., Dwarkadas J.

Sanghvi College of Engg. from 1-4-2005 till 1-1-2006.

3. Lecturer in Production Engineering, Dwarkadas J.

Sanghvi College of Engg. from 1-7-1997 to 31-3-2005.

Industry: 10 months

1. Engineer (Production), Garware Polyester's Ltd.,

Aurangabad from 14-9-94 to 31-3-95.

2. Apprentice, Needle Roller Bearings (N.R.B.) Jalna from

September, 1995 to December, 1995.

Papers Published in

Journals

: National:-- 01

(1) “Electron-Beam Curing of Polymeric Composites: An

Enabling Technology for Advanced Manufacturing” in IPI

journal (The official publication of Indian Plastics Institute),

June/July 2013,Vol.18, issue 2.(with Dr. Hari Vasudevan)

International :-- 08

(1) “Grey Fuzzy Multiobjective Optimization of Process

Parameters for CNC Turning of GFRP/Epoxy Composites”

in Elsevier Journal “Procedia Engineering” vol. 97 (2014) pp.

85 – 94 (doi: 10.1016/j.proeng.2014.12.228) (with Dr. Hari

Vasudevan and Ramesh Rajguru)

(2) “Multiobjective Optimization of Drilling Characteristics

for NEMA G -11 GFRP/Epoxy Composite using Desirability

Coupled with Taguchi Method ” in Elsevier Journal

“Procedia Engineering” vol. 97 (2014) pp. 522 – 530 (doi:

10.1016/j.proeng.2014.12.278) (with Dr. Hari Vasudevan and

Ramesh Rajguru)

(3) “A study on Edge Milling Operation of NEMA G11

GFRP Composites based on Grey-Taguchi method” in the

international journal Applied Mechanics and Materials -

ISSN:660-9336, (doi:10.4028/www.scientific.net/AMM.592-

594.18) Vols. 592-594 (2014) pp.18-22, (with Dr. Hari

Vasudevan and Ramesh Rajguru )

(4) “Desirability Fuzzy Multiple criteria Optimization of

Process Parameters in CNC Turning of GFRP/ Vinyl ester

Composites” in Elsevier published Journal “Procedia

Material Science” Vol. 5 (2014) pp. 2458 – 2467 (with Dr.

Hari Vasudevan and Ramesh Rajguru).

DOI: 10.1016/j.mspro.2014.07.497

(5) “Experimental Investigation and Optimization in Edge

Milling of NEMA G-11 GFRP/Epoxy Composites” presented

in Elsevier published Journal “Procedia Material Science”

Vol. 5 (2014) pp. 2105 – 2114 (with Dr. Hari Vasudevan and

Ramesh Rajguru).

DOI: 10.1016/j.mspro.2014.07.546

(6) “Investigation of the Machinability Characteristics of

GFRP/ Epoxy Composites using Taguchi Methodology” in

the international Journal of Applied Mechanics and

Materials (AMM) Vol. 612 (2014) pp 123-129, as a special

volume titled “Advanced Research in Design, Manufacturing

and Materials”. Published by Trans Tech Publications Ltd

Switzerland,(doi:10.4028/www.scientific.net/AMM.612.123)

(with Dr. Hari Vasudevan and Ramesh Rajguru ).

(7) “Investigation of the machinability characteristics of

GFRP/vinyl ester composite using design of experiments ”, in

the International Journal of Machining and Machinability of

Materials: Special issue on Machining of Advanced

Materials, Inderscience 2014, Vol.15, No.3/4, pp.186 – 200

ISSN (Online): 1748-572X - ISSN (Print): 1748-5711. (with

Dr. Hari Vasudevan and Ramesh Rajguru )

DOI: 10.1504/IJMMM.2014.060549

(8) “Exploring the performance of a Single Cylinder Diesel

Engine with alternative fuels such as CME and CME-Diesel

Blends” in the International Journal of Current Engineering

and Technology, InPressco International Press Corporation,

Vol. 3, Issue 3, pp.1-4, ISSN 2277-4106 (with Dr. Hari

Vasudevan, Sandip Mane and Rajguru Ramesh).

Papers Published in

conferences

:

National:-- 02

(1) “Analysis of Compliant Cellular Materials for Potential

Industrial Applications” in the National Conference on

Innovation in Futuristic Materials & Manufacturing

Techniques [IFMMT-2014], during 26th

and 27th

December

2014, organized by Department of Mechanical Engg., School

of Engg. And Tech., Manipal University, Jaipur. (with

Umang Dadhich and Ometz Elijah)

(2)“Delamination in Machining of Composite Materials: A

Review in the Context of Drilling Operation” in the National

Conference on Emerging Trends in Engineering, NCETE-13,

during 4th & 5th January 2013, organized by M.H.Saboo

Siddik College of Engineering, Byculla, Mumbai. (with Dr.

Hari Vasudevan and Ramesh Rajguru )

International :-- 11

(1)“Utility Fuzzy Multiobjective Optimization of Process

Parameters for CNC Turning of GFRP/Epoxy Composites” ,

presented in the International conference on All India

Manufacturing Technology, Design and Research

(AIMTDR-2014) held at Indian Institute of Technology

Guwahati, Assam, India during December 12-14, 2014.

(ISBN: 978-8-19274-610-4) (with Dr. Hari Vasudevan and

Ramesh Rajguru)

(2)“Experimental Investigation and Optimization of Milling

Parameters in the Machining of NEMA G -11 GFRP

Composite Material using PCD Tool” , presented in the

International conference on All India Manufacturing

Technology, Design and Research (AIMTDR-2014) held at

Indian Institute of Technology Guwahati, Assam, India

during December 12-14, 2014. (ISBN: 978-8-19274-610-4)

(with Dr. Hari Vasudevan and Ramesh Rajguru)

(3)“Utility Fuzzy Multicriteria Optimization of Process

Parameters in CNC Turning of GFRP/ Vinyl ester

Composites” presented in the ICMMM2014 conference held

at Indian Institute of Technology Madras, Chennai, during

August 8-9, 2014. (ISBN 978-93-80689-18-0) (with Dr. Hari

Vasudevan and Ramesh Rajguru)

(4) “Grey fuzzy optimization of milling parameters for G-11

GFRP/Epoxy composites with multiple performance

characteristics” presented in the ICMMM2014 conference

held at Indian Institute of Technology Madras, Chennai,

during August 8-9, 2014. (ISBN 978-93-80689-18-0) (with

Dr. Hari Vasudevan and Ramesh Rajguru )

(5)“Multi Criteria Decision Making using Fuzzy Inference

System : A Case in Manufacturing” presented in the

ICCICCT 2014 conference organized by Noorul Islam centre

for higher education, Noorul Islam university, Kumaracoil,

Tamilnadu, India, from July 10-11, 2014. pp.1280 – 1286.

(ISBN: 978-1-4799-4191-9) (doi:10.1109/ICCICCT.2014.6)

(IEEE Xplore) (with Dr. Hari Vasudevan and Ramesh

Rajguru )

(6)“An Experimental Investigation into the Optimization of

Cutting Force in CNC Turning of Woven Fabric based

GFRP/Epoxy Composites using PCD Cutting Tool”

presented in the International Conference on Design,

Manufacturing and Mechatronics organized by Trinity

college of engineering and research Pune, Maharashtra, from

9th – 10th Jan.2014 . (with Dr. Hari Vasudevan and Ramesh

Rajguru )

(7)“An Experimental Study on the Performance and

Emission Characteristics of a Single Cylinder Diesel Engine

Using CME-Diesel Blends”, in the International Conference

on Renewable Energy and Sustainable Development

(ICRESD-2014) organized by KJEI‟s Trinity College of

Engineering and Research, Pune from 9th to 10th January

2014 (with Dr. Hari Vasudevan, S. Mane and R. Rajguru).

(8) “Analysis of a Multi-criteria optimization problem using

Taguchi and Grey relational analysis: A case study in the

machining of composite materials” in the International

Conference on Advances in Mechanical Engineering

organized by the department of Mechanical Engineering,

College of Engineering Pune, Maharashtra, from 29th-31st

May 2013 . (with Dr. Hari Vasudevan and Ramesh Rajguru)

(9)“Study of Cutting Force in CNC Turning of Woven Fabric

based GFRP/Vinylester Composites using PCD Cutting

Tool” in the International Conference on Advanced

Manufacturing and Automation (INCAMA-2013, ISBN 978-

93-80686-50-9) organised by the Department of Mechanical

Engineering (DST-FIST Sponsored) Kalasalingam

University, Madurai, Tamil Nadu from the 28th-30th March

2013 . (with Dr. Hari Vasudevan and Ramesh Rajguru )

(10)“Multi-criteria optimization using Taguchi and Grey

relational analysis in CNC drilling of GFRP/E composite

material” in the International Conference on Advanced

Manufacturing and Automation (INCAMA-2013, ISBN 978-

93-80686-50-9) organised by the Department of Mechanical

Engineering (DST-FIST Sponsored) Kalasalingam

University, Madurai, Tamil Nadu from the 28th-30th March

2013. (with Dr. Hari Vasudevan and Ramesh Rajguru)

(11)“Recent Trends and Developments in the use of Woven

Fabric Reinforcements for Composite Materials” in the

International Conference on Innovations in Automation and

Mechatronics Engineering 2013 (ICIAME-2013,ISBN 978-

81-924744-03), organised by G.H.Patel College of

Engineering & Technology, Vallabh Vidyanagar, Gujarat,

India, 21-23 February 2013. (with Dr. Hari Vasudevan and

Ramesh Rajguru)

Professional Memberships : 1. Life member of I.S.T.E. (Indian Society of Technical

Education)

2. Life Member of I.S.M.E. (Indian Society of Manufacturing

Engineers)

Reviewer

Guest Lecture /

Technical Talk

Awards

:

:

:

1. Reviewer for Elsevier published “International Journal of

Taiwan Institute of Chemical Engineers”.

2. Reviewer for “Indian Journal of Engineering & Materials

Sciences”.

1. Delivered an Expert talked on “Low Cost Automation” at

the national seminar on Affordable Technologies for SME

sector in INDIA held on 27 th March 2015 at Lala

Lajpatrai Institute of Management, Mahalaxmi, Mumbai.

1. Recipient of „Best Teacher Award‟ for the academic year

2008–09 from department of production engineering.

Award constituted by SVKM management, includes a

certificate of honor, and Rs. 5,000/- in cash.


Designation

Department

Date of Joining the

Institution

:

:

:

:

Mr. Sandeep R. Vaity

Lecturer (Senior Scale)


02.01.1998


Grade

: 1. B.E. (Production Engg.), 1991, Ist class (61%), University

of Pune.

2. D.B.M., 1993, Indian Merchant Chamber.

3. M.E. (Mechanical Engg.), with Ist Class from University

of Mumbai in August, 2010.


: Teaching:18 Years

1. Lecturer in Production Engineering, Dwarkadas J. Sanghvi


2. Lecturer (Sr. Scale) in Production Engineering, Dwarkadas

J. Sanghvi College of Engineering from 1-4-2006 till date.

Industry: 6 years

1. Trainee Engineer, Borosil Glass Works Ltd., Mumbai from

May, 1991 to December, 1991.

2. Production Engineer, Technopride Engineering Co.,

Mumbai from December, 1991 to July, 1993.

3. Engineer (Planning & Coordination), Hydrodyne

Industries, Mumbai from July, 1993 to July, 1995.

4. Sr. Engineer (P.P.C.), Transweigh (India) Ltd., Mumbai

from August, 1995 to July, 1996.

5. Partner, Shrey Hydraulics & Pneumatics, Mumbai from

August, 1995 to December, 1996.

Papers Presented in

Conferences

: International : 2

1. Presented paper titled “Leveraging technology in wealth

creation: Achieving the competitiveness in mergers and

acquisitions in Indian industries.

2. Presented paper titled “Juxtaposing industrial engineering

systems of manufacturing enterprises undertaking

inorganic growth for global competitiveness.


Designation

Department

Date of Joining the

Institution

:

:

:

:

Mrs. Meeta Nirav Gandhi

Lecturer

Dept of Production Engg.

11.07.2007


Grade

: 1. M.E. (Mechanical Engg.), 2000, 1st in University,

Sardar Vallabhbhai Regional College of Engineering

& Technology, Surat.

2. BE Mechanical, 1996, Sardar Vallabhbhai Regional

College of Engineering & Technology, Surat.


: Teaching:- 19 years

1. Assistant Professor, D.J. Sanghvi College of Engg.,

11-7-2007 to till date.

2. Lecturer, K.J. Somaiya College of Engg., from July

2000 to July 2007.

3. Lecturer, Institute of Technology for women, SNDT

University from March 1999 to June 2000.

4. Lecturer, Sarvajanik College of Engg. & Tech, Surat

from June 1997 to Feb 1999.

5. Lecturer, Sardar Valabhbhai Regional College of

Engg. & Tech, Surat form Sept 1996 to June 1997.

Papers Presented in

Conferences

: National :1

Presented a paper on „Cooling Coil Design and

Performance Evaluation‟ at National Conference on

Advances in Mechanical Engineering, organized by

Rajiv Gandhi Institute of Technology, Mumbai during

15- 16th

January, 2009.

International : 1

Presented a paper on “Thermal Power Generation

and Energy Savings for Industrial Boilers” at 20th

national and 9th International ISHMT-ASME Heat

and Mass Transfer Conference organized by IIT

Bombay on 4th January to 6th January 2010.

http://www.rpsonline.com.sg/proceedings/9789810838133/html/263.xml

http://www.rpsonline.com.sg/proceedings/9789810838133/html/263.xml

One International Paper on “Phasor Analysis of

double inlet pulse Tube Crycooler” Presented at

International Conference on Cryogenic Engg. and

Cryogenic materials” July 2000 at Montreal,

Canada.(with Dr. H. B. Naik and Prof. K. P. Desai).

Professional Memberships

: Life member of Indian Society of Technical

Education.

Life member of Indian society of Heating

Refrigerating and Air conditioning Engineers,

Mumbai chapter.

Life member of Indian Society of Manufacturing

Engineers.

Awards

: - September 2006, awarded “Excellence in Teaching”

by Student Council 2006-2007 of K.J.Somaiya

College of Engineering.


Designation

Department

Date of Joining the

Institution

:

:

:

:

Mr. Avadhut Anant Samant.

Lecturer


07.07.2008


Grade

:

1. B.E. (Production Engg.) from University of Pune, 1st

Class, 64.4%, May, 1996.

2. M.E. (Production Engg.) from University of Mumbai,

1st Class, 62.52%, August, 2003.


: Teaching: 17 years

1. Lecturer, B.V. Polytechnic Vasai Mechanical Dept.

from16.7.1996 to 15.7.2003.

2. Sr. Lecturer, B.V. Polytechnic Vasai from 16-7-2003

to 13-7-2007.

3. Lecturer (Adhoc), D.J. Sanghvi C.O.E. (Production

Engg. Dept.) from 16-7-2007 to 6-7-2008.

4. Lecturer, D.J. Sanghvi C.O.E. (Production Engg.

Dept.) from 7-7-2008 till date.


Designation

Department

Date of Joining the

Institution

:

:

:

:

Mr. Mehul S. Prajapati

Assistant Professor


12.07.2011


Grade

: 1. B.E. (Production) from University of Mumbai

with Ist Class (65.45%) in Jun, 2007.

2. M. Tech. (Production) from VJTI with Ist Class

(7.6CPI) in Jul, 2010.


: Teaching: 5 years

1. Assistant Professor at D. J. Sanghvi College of

Engineering from 12/07/2011 till date

2. Lecturer(Adhoc), D. J. Sanghvi College of

Engineering from 10.01.2011 to 30.6.2011.

3. Lecturer, VJTI from July, 2010 to Dec, 2010.

Industry:

GET, L & T from Jun 2007 to Dec, 2008.

Papers Presented in

Conferences

: International :--

1. ‘Analysis of Pressure Relief Valve using

Matlab Simulink’ at Thirty Seventh National

&Fourth International Conference on Fluid

Mechanics and Fluid Power at IIT Madras


Designation

Department

Date of Joining the

Institution

:

:

:

:

Mr. Sandip H. Mane

Assistant Professor


11.07.2011


Grade

: 1. PhD (Mechanical Engg) (Pursuing)

2. M.Tech. (Thermal & Fluid Engg.) ,Ist Class with

Distinction (7.7 CGPA) from Dr. Babasaheb

Ambedkar Technology University, Lonere in

September, 2010.

3. B.E (Mechanical Engg.) ,Ist Class with Distinction

(70%) from Shivaji University, Kolhapur in April,

2003. 4.



Assistant Professor, Bharati Vidyapeeth College of

Engg.,. from August, 2007 till date.

Lecturer , Saraswati College of Engineering from July,

2004 to August, 2007.

Industry:-- 1 year

As Shift In-charge in Esppe Industrial Corporation from

July, 2003 to June 2004.

Research:--

Papers Published

Papers Presented in

Conferences

: National:--

International :--

(1) An Overview of Hydrogen fuelled SI Engine“

Hydrogen fuelled SI Engine” , accepted for oral

presentation in the International journal on Global

Technology initiatives, ISSN 2277-6591, Vol.1, Issue 1

(with Suhas uthale).

(2)“Exploring the performance of a Single Cylinder

Diesel Engine with alternative fuels such as CME and

CME-Diesel Blends” in the International Journal of

Current Engineering and Technology, ISSN 2277-4106,

In Pressco International Press Corporation, Vol. 3, Issue

3 (with Dr. Hari Vasudevan, Sandip Mane and Rajguru

Ramesh).

National :--

1. Modern Trends In I.C. Engine at YTIT

2. Recent Trends In Cryogenics at YTIT

: 3. ome Investigation of I.C. engine Using Alternative

Fuels at “Datta Meghe College of Engg. Airoli.

4. Overview of hydrogen fueled. CI Engine at Sinhgad

College of Engg. Lonavala, Pune.

International :--

(1)“Design and Analysis of Flexure bearing for linear

compressor” , accepted for oral presentation in the

International conference on Recent Advances in

Engineering, Technology and Management (SPICON-

2012) being held at Sardar Patel College of Engineering,

Mumbai, Maharashtra, India during June 1-06, 2012.

(with Suhas Uthale)

(2)“Hydrogen as a alternative fuel for SI Engine” ,

accepted for oral presentation in the International

conference on Global Technology initiatives, (ICGTI-

2012) being held at Rizvi College of Engineering,

Mumbai, Maharastra, India during March 27-0-3, 2012.

(with Suhas Uthale )

(3)“Utility Fuzzy Multiobjective Optimization of Process

Parameters for CNC Turning of GFRP/Epoxy

Composites” , accepted for oral presentation in the

International conference on All India Manufacturing

Technology, Design and Research (AIMTDR-2014)

being held at Indian Institute of Technology Guwahati,

Assam, India during December 12-14, 2014. (with Dr.

Hari Vasudevan, N C. Deshpande and Ramesh Rajguru )

(4)“Experimental Investigation and Optimization of

Milling Parameters in the Machining of NEMA G -11

GFRP Composite Material using PCD Tool” , accepted

for oral presentation in the International conference on

All India Manufacturing Technology, Design and

Research (AIMTDR-2014) being held at Indian Institute

of Technology Guwahati, Assam, India during

December 12-14, 2014. (with Dr. Hari Vasudevan, N C.

Deshpande and Ramesh Rajguru)

(5)“An Experimental Study on the Performance and

Emission Characteristics of a Single Cylinder Diesel

Engine Using CME-Diesel Blends”, in the International

Conference on Renewable Energy and Sustainable

Development (ICRESD-2014) organized by KJEI’s

Trinity College of Engineering and Research, Pune from

9th to 10th January 2014 (with Dr. Hari Vasudevan,

Mane Sandeep and Rajguru Ramesh).


: - Life member of Indian Society of Technical

Education


Designation

Department

Date of Joining the

Institution

:

:

:

:

Mrs. Trupti Markose

Assistant Professor


18.07.2011


Grade

: 1. B.E (Mechanical Engg.) ,Ist Class (70.29 %) from

The M.S. University of Baroda, Baroda in April,

2003.

2. M.E. (Production Engg.) , Ist Class (77.84 %)

from The M.S. University of Baroda, Baroda in

June, 2005



1. Assistant professor D J Sanghvi college of

engineering from 18th July 2011 to till date.

2. Lecturer, Fr. Conceicao Rodrigues College of

Engg. from 6th

August, 2007 to July 2011.

3. Lecturer , Charotar Institute Of Technology

Changa, Anand, Gujarat from 1st March, 2006

to 12th

July, 2007.

4. Lecturer, The Maharaja Sayajirao University

of Baroda, Gujarat from 1st August, 2005 to

28th

February, 2006.

Papers Presented in

Conferences

: National :--

1. Paper on “Experimental Analysis for Orifice

Type Thrust Bearing” Ref. No. ESDA2006-

95477 presented at 8th

Biennial ASME

Conference of Engineering Systems Design

and Analysis (ESDA2006), organized by

Politecnico di Torino during 4 to 7th

July,2006

in Turin, Italy.

2. Paper on “A two component drill

dynamometer with zero cross sensitivity”

presented at National Conference on

Mechanical Engineering (NATCON.ME-

2005), organized by Ghousia College of

Engineering, Bangalore during 11th

& 12th

March, 2005.


: 1. Life member of „The Indian Society For

Technical Education „ (ISTE)

2. Life member of „Association For Machines &

Mechanisms‟ (AMM)


Designation

Department

Date of Joining the

Institution

:

:

:

:

Mr. Amit A Chaudhari

Assistant Professor


2.7.2012


Grade

: 1. PhD (Mechanical Engg) (Pursuing)

2. M.E. (Mechanical – CAD CAM) (8.42 CGP)

from Amravati University

3. B.E. (Mechanical) PRMIT&R (64.14%)

from Amravati University


: Teaching:- 06 Years

1. Assistant professor – D J Sanghvi College of

Engineering from 2.7.2012 to till date.

2. Lecturer - Vidyavardhini‟s College of

Engineering and Technology from 15th

July,

2010 to 30 June 2012.

3. Lecturer – Atharva College of Engineering

from 1st August, 2009 to 30

th June, 2010.

Papers Presented in

Conferences

: National :

1. Presented a paper on “Mono Composite Leaf

Spring: Modeling and analysis under static

load condition” at Vidyavardhini‟s college of

Engineering and Technology Mumbai in

2011.

STTPs/ Workshops : 1. Two-days ISTE workshop on Writing

Effective Conference Papers under NME-

ICT, By MHRD; Government of India from

18th Feb. to 19th Feb., 2012.

2. Two week STTP on “Solid modeling and

Finite element analysis” at PRMIT&R,

Badnera.

3. Two week ISTE workshop on Engineering

Mechanics By MHRD


: 1. Life member of „The Indian Society For

Technical Education „ (ISTE).


Designation

Department

Date of Joining the

Institution

:

:

:

:

Mr. Sanket D. Parab

Assistant Professor


05.01.2015


Grade

: 1. M.E (Mechanical Engineering with

specialization in CAD/CAM & Robotics),

1st Class with Distinction (9.19 CGPI),

Topper in K.J.Somaiya College of

Engineering for the academic Year’s

(2012-13) & (2013-14).

2. B.E. (Mechanical Engineering), 1st Class with

Distinction (71.56%), Shivaji University, May

2012.


: Teaching:- 1 year

1. Assistant Professor, Dwarkadas J. Sanghvi

College of Engineering from 05-01-2015 till

date.

2. Assistant Professor, Lokmanya Tilak College

of Engineering from 11-07-2014 to 3-1-2015.

Papers Published

: International:

1. Author of Paper titled “Application

Programming ABB Industrial Robot for

Reducing Welding Cycle Time.” in

International Journal on Theoretical and

Applied Research in Mechanical Engineering.

National:-

1. Presented Paper on the topic “Programming

of Robotic cell for reducing cycle time &

improved weld quality of a Defender Safe

Product” at Recent Advances and Challenges

in Engineering and Management (RACEM-

2014) held at Vidyalankar Institute of

Technology, Mumbai, on 3rd-4th April 2014 .

Awards

: Won 1st Prize in 100 m race for faculty(held on

16/1/2015) in DJ Sanghvi College of Engg.


Designation

Department

Date of Joining the

Institution

:

:

:

:

Mr. Dhananjay S. Shukla

Assistant Professor


05.01.2015


Grade

: 1. M.Tech (Mechanical Engineering with

specialization inThermal Engineering, 1st

Class with Distinction (9.8CPI),1st

in VJTI -

Gold Medalist, University of Mumbai,July

2013.

2. B.E. (Mechanical Engineering), 1st

Class

with Distinction (79.50%), 6th

Rank in

University of Mumbai, 1st

Rank in S.S.

Jondhale College of Engineering, University

of Mumbai, May 2010


: Teaching:-

1. Assistant Professor, Dwarkadas J. Sanghvi

College of Engineering from 05-01-2015 till

date. 2. Assistant Professor, Konkan Gyanpeeth

College of Engineering from 10-01-2014 to

22-08-2014. 3. Assistant Professor, A.C. Patil College of

Engineering from 05-08-2013 to 23-12-2013.

4. Lecturer, S.S. Jondhale College of

Engineering from 21-09-2010 to 19-06-2011.

Papers Published

: Journal:

“Experimental Study of Iodine Removal

Efficiency In Self-Priming Venturi Scrubber”

published in Annals of Nuclear Energy. Ms.

Ref. No.: NUCENE-D-14-00260R2.

Awards

: Participated in 100 m run (Faculty Level)

organized by Dwarkadas J. Sanghvi College of

Engineering Sports Club on Sport Day (16th

Jan,

2015) – Won 3rd

Prize.


Designation

Department

Date of Joining the

Institution

:

:

:

:

Ms. Amruta Arvind Rane.

Asst. Prof. (Adhoc)


6.7.2013


Grade

: 1. Pursuing M.E. (Mechanical – Manufacturing

Systems) from Mumbai University.

2. B.E. Production (78.54%) from Mumbai

University.


: Teaching:- 04 Years

1. Asst. Prof., Vile Parle Kelavani Mandal’s

Dwarkadas J. sanghvi College of Engineering

from 6th

July, 2013 to till date.

2. Lecturer, Anjuman-I-Islam’s Abdul Razzak

Kalsekar Polytechnic from 23rd

August, 2011

to 5th

July, 2013.

Industry:- 06 Months

Junior Executive Supply Chain at Creative

Plastics and Packaging from 1st February,

2011 to 1st August, 2011

dr. hari vasudevandjsce.ac.in/common/uploads/contenttemplate/complete faculty with hv sir.pdf ·...

Documents