Download - Wiser-NIRT Programming Guidelines

Guidelines

Once there were smart homes, now there are Wiser Ho mes.

C-Bus Internet (from ADSL Modem

Ethernet

What is a Wiser Home Controller?

Wiser is a controller, which provides;

a) Home automation thru C-Bus,

b) Connectivity to IP devices.

c) Connectivity to your Home Automation & IP devices thru LAN, WiFi & Internet.

d) Standard GUI output to Mobiles, Laptops, TV, PDA, Web Tablets, Door Entry Systems etc.

It truly and fully interlinks the three worlds

How & where to Sell Wiser Home Controller?

Wiser is not a stand alone product but a complete solution. It should be sold as a package to customers.

Wiser Home Controller can be sold to Customers for linking to;

•C-Bus for Lighting controls, Curtain/ Blinds Controls, Surveillance etc.

•To connect to IP cameras.

•To have remote connectivity thru LAN, Wi-Fi & Internet.

•TV Channel & Volume Control can be linked to Wiser thru C-Bus (using NIRT module)

•Security Control thru C-Bus (using Minder Pro Security Controller)

In Wiser Home Controller-

•There is a limited number of Graphical User Interface – Limited options, icons. This holds good as you have a common interface to all your equipments viz; Laptop, Mobile, PDA, TV etc.

•Microsoft Media Centre enabled TV is required to see Wiser Screen.

•For internet connectivity a static IP is required, which is provided by Internet Service Providers (ISP’s).

•IP cameras are compatible with Wiser. Preferred ones are Axis 206, Axis-M1011W

•All Symbian-60 mobiles (with the latest upgrade) are compatible with Wiser. Apple & I-touch phones not included.

Some Pre-requisites for Wiser;

What are the different applications that a Wiser Ho me Controller Support?

Wiser supports access of Lighting & Curtain Controls, Surveillance & Security thru LAN, Wi-Fi and Internet

How to connect C-Bus to Wiser Home Controller?

Internet

C-Bus

LAN

ADSL Modem

Wiser Home Controller

How to do it?

You don’t need to spend

your time to think How to create user-friendly and intuitive graphic interface…

Wiser Programming make your life simple

Programming / Commissioning Tools for Wiser

• To program Wiser Home Controller, installers use ‘PICED’ software, the same tool used by installers to program

– C-Bus Colour Touch screens

– C-Bus Black and White Touch screens– C-Bus Automation controllers

Programming - Using PICED to configure project

• Step 1 – Using C-Bus Toolkit to configure the project first. Download and install the latest version of “PICED” from http://www2.clipsal.com/cis/technical/downloads/piced.


• Step 2 – Open the “PICED”.


• Step 3 – Select “Create a New Blank Project” and press “Next”.


• Step 4 - Select “Wiser Home Control”, change the screen size to suit your display and press “Next”.


• Step 5 – Select the correct C-Bus Project that create in C-Bus Toolkit and press “Next”.


• Step 6 – Using the default setting and press “Next”.


• Step 7 – Input the relevant information and press “Next”.


• Step 8 - Input the relevant information and press “Next”.


• Step 9 – In the LAN Properties, enter the correct IP address of Wiser and CNI that is configured before.


• Step 10 – In the Permit Access to Wiser Home Control, select “Enable Toolkit Control”, “Enable Projector Control” and “Enable Project Update”.


• Step 11 – Select the require skin, you can see in the preview windows.


• Step 12 – Select “Show Full Screen” in Options and press “Next”.


• Step 13 – Keep default and press “Next”.


• Step 14 - Input the relevant information and press “Next”.


• Step 15 - Input the relevant information and press “Finish”.

Programming - Add Location

• Step 16 – Press “Add”


• Step 17 – Input the Location Name and press “OK”.


• Step 18 – Repeat the step 17, adding “Master Room” and Bedroom”. Press “Next”.

Programming - Add Function Groups

• Step 19 - Press “Add”.


• Step 20 - Input the Function Group Name and select the desire icon. Press “OK”.


• Step 21 - Repeat the step 20, adding “Control”, “Scene” and “HVAC”. Press “Next”.

Graphical User Interface (GUI) Creator

Schneider Electric 32- IS&C APOD – Wiser Home Control

Graphical User Interface (GUI) Creator

• Accessed via PICED software tool• Fast, Wizard based commissioning for installers• Consistent user experience across multiple devices• Flexible, but simple for the user to navigate• Visually engaging• User interface can either be:-

– Served from the controller to client devices (using web server)

– Run on client devices with commands sent to the controller

Programming - Add Widgets

• Step 22 – Select “Living Room” in Location.


• Step 23 - Select “Lighting” in Function Group. Use mouse to select and left click “Add Widget”.


• Step 24 – In the Widget windows, select the correct information for the desire service. Press “OK”.


• Step 25 – You can click “Preview” to see the display format.


• Step 26 – Repeat step 24, adding the Widget for “Scene”.


• Step 27 - Repeat step 24, adding the Widget for “Security”.


• Step 28 - Repeat step 24, adding the Widget for “Media”.


• Step 29 - Repeat step 24, adding the Widget for “Surveillance”. Input the correct address of the IP camera in URL.


• Step 30 - Repeat step 24, adding the Widget for “Curtain”.

Email Manager


Email Manager

• Information read from ISP server email account inbox – Number of e-mails – Sender – Subject – Email body text (First ~300 characters)

• e-mail data (e.g. message count, message subject) can be monitoredand used in PICED logic programs


• Step 31 - Use mouse to select and left click “E-Mail”. Press “Add”.


• Step 32 - Input the correct information and press “OK”.

RSS Feed



• Step 33 - Use mouse to select and left click “RSS”. Press “Add”, input the correct information and press “OK”.


• Step 34 - Repeat step 33 to add more RSS Feeds.

Schedule Manager


Schedule Manager

• Accessed via PICED software tool• Allows time based events to be programmed in Wiser• Schedules can be added, duplicated, edited and deleted in the

Schedule Manager• The schedule editor allows the following to be edited

– The schedule name or description– Schedule time(s)– Schedule day(s)– Schedule event(s)

Scene Manager


Scene Manager

• Accessed via PICED software tool• The Scene Manager allows installers to quickly and easily program

scenes into Wiser. • The Scene Manager allows the installer to view, add, copy, edit and

delete scenes in a PAC project. • The Scene Manager allows the installer to edit the scenes in a project

Logic Program Manager


Logic Program Manager

• Accessed via PICED software tool• Logic programs are developed by the installer using freeform text entry

or, for simple logic programs, a programming wizard is provided.• The program language supports commands such as:

– Conditional logic (IF THEN, AND, OR, etc)– Flow Control (FOR, REPEAT, WHILE)– Variables (integer, real, Boolean, character, string)

• The Language has been extended to support functions such as:– Control and monitor C-Bus Addresses– Control and monitor C-Bus scenes

Download the project data to Wiser


Programming - Download project file to Wiser

• Step 1 - Click “Transfer”, select “Transfer current project” and Click “OK”


• Step 2 - Input the correct IP of the Wiser controller and Click “OK”.


• Step 3 - If connect, the wiser controller will shown. Goto “Firmware Upgrade” page.


• Step 4 - Key in the password of the Wiser controller and click “Transfer Firmware”.


• Step 5 – If transfer complete, wait for 2 minutes for the Wiser reboot.


• Step 6 - Goto “Transfer” page, select “Transfer Project To Wiser”. Click “Start”.


• Step 7 – Project file transfer.


• Step 8 - After transfer complete, wait 90 seconds for the Wiser reboot.

Configure Wiser Home Controller


Programming – Configure Wiser Home Controller

• Step 1 - Open Internet Explorer, key in the address of the wiser controller (i.e. http://192.168.2.1). Input the User name and Password (default : admin for both)

Programming - Configure Wiser Home Controller

• Step 2 - Waiting for login. You can see the Wiser firmware version.


• Step 3 - When login success, you can see the Welcome page. You can click the top-left button to toggle full screen display.


• Step 4 - Click the “System Utilities”


• Step 5 - Click “Configure Router”


• Step 6 - You can change the router setting according to your network configuration in the Setup page.


• Step 7 - You can get network information in the Status page.


• Step 8 – You can enable and change the wireless (Wi-Fi) configuration in the Wireless page.


• Step 9 - You can get Wiser information in the Wiser page.

Create Projector File for Flash GUI


Export Wiser Home Controller User Interface in Flash

• Step 1 - Click “Projector”.


• Step 2 – Select suitable size of display and click “OK”.


• Step 3 – Select suitable size of the display and Click “OK” to create the file. There will be a self-extracting zip file in your project directory containing the projector files (same name as your project but with ".exe" file extension)


• Step 4 - Copy this file to your device. Run the self-extracting zip file and extract the files to a suitable location.


• Step 5 - To run the projector, execute the *.exe file which was extractedfrom the zip.


• Step 6 – Adobe Flasher Player will open and you can use Ctrl+F to change in Full Screen mode.

Windows Media Center Plug-in


Configure the Wiser Windows Media Centre Plug-in

• The Wiser Windows Media Centre Plug-in is a plug-in for the Microsoft Windows Vista Media Centre which allows many devices in a home to be controlled from a Media Centre.

• It requires a Windows Media Centre and a Wiser Home Control unit, connected to a C-Bus system.

Configure the Wiser Windows Media Centre Plug-in

• Step 1 - Download and install the latest version of “Wiser Windows Media Center Plug-in” from http://www2.clipsal.com/cis/technical/downloads/general_utilities#WiserPlugin

• Step 2 - Run the self-extracting zip file. Copy the file is called VISTA_MCE_x_x_x.msi to your MCE device and install it with double click.

• Step 3 – The Wiser Icon is added in the MCE.

Web Tablet

Door Entry System

TV / Media Centre

Touch Screen Panel

Mobile Phone

Personal Computer

Now, you can have same GUI in ….

For remote connectivity thru Internet, what do we r equire?

First of all, we require a Broadband connection with a Static IP from the Internet Service Provider. A monthly charge is levied for the usage, depending on the nature of the ISP.

Please find below the steps in connecting Wiser to internet.

Go to “Configure Router” on Wiser;

Step 1)

In the “Setup” option, there is a sub option “Basic Setup”. Please find below the desired settings.

Static IP provided by ISP

Step 2)

For LAN Connectivity, we need a local IP address. We can also specify the IP address range and the no. of users using Wiser. For Eg- Refer below

Step 3)

For WI-FI, In the “Wireless” settings, under “Basic Wireless Settings” please do the following settings.

Step 4)

How to Connect IP devices to Wiser Home Controller?

IP devices for e.g., IP camera Axis 206 can be connected to Wiser by providing a “Static IP” to the IP device. In the camera setup, use the option static IP and put the IP address in the provided space. The IP should be in line with the IP range of Wiser (as shown below).

In Wiser you are required to put a URL (which is mentioned in the camera settings). In this case for Axis206, the URL is “http://<IP address>/axis-cgi/jpg/image.cgi ”

Specification sheet for Wiser Home Controller

•Arm7 300MHz processor

•4MB memory (total)

•100/10 Ethernet

•802.11N (Draft) Wireless Ethernet

•Four port router (3 spare)

•WAN port

•NTP support

•Dyn DNS support

•C-Bus connection

•Imbedded :Linux operating system

•Imbedded web server

SI Test Bench – Wiser Requirements pages 1/2

Wiser Home Controller14

5100HSCHigh Speed Programming Cable13

5100RPIR Code Learning Unit12

8050/2LDDual IR Emitter Lead11

E5034NIRT-WE2 channel IR Controller10

5501REEnclosure for Curtain Module9

L5501RBCPSingle Channel Curtain Module8

L5508RVF8 Channel Relay, 10A per channel, 220/240Vac, 50/60Hz, C-Bus 200mA7

L5508DSI8 Channel Dimmer for DSI Electronic ballasts, 220/ 240Vac, 50/60Hz, C-Bus 200mA6

E5031PE-WELight Level Sensor, 40-1600 Lux5

5753PEIRLIndoor Multi Sensor, 360 degrees (C-Bus)4

E5084 DL-GFKey Input 4 gang, Transparent Glass facia3

5088TXIR Remote Control , 8 Button2

E5500CNComputer Network Interface, 10 base-T1

C-Bus Units

SI Test Bench – Wiser Requirements pages 2/2

Axis Camera 206 or M1011W9

Microsoft Media Centre enabled TV8

Broadband Internet Connection with Static IP7

Symbian 60 Mobile 6

Electronic Appliance with IR Remote, eg-TV (for NIRT application)5

Incandescent Lamps4

Dimmable 4 pin CFL's3

DSI Ballast- TRIDONIC 2

Somfy AC Curtain motors & Curtains1

Sourced Accessories

Integrating IR Remotes to C-Bus thru NIRT module

Integrating IR Remotes to C-Bus thru NIRT module

Choose an appliance with IR remote to be integrated to C-Bus.

Read the IR codes of the remote by using the IR code learning unit 5100RP & “IR Reader ”software

You can choose from existing codes if it is a branded remote or you can define the codes by naming them.

How to learn the codes;

Step 1) Connect the IR Leaning Unit to the Laptop and open software “IR reader”.

Step 2) Select the remote and put the specifications on the left hand side.

Step 3) Follow the instructions in the pop-up:

Step 4) IR Code protocol is captured

Step 5) Define each button by naming them and learning thru IR learning unit

Step 6) Connect your NIRT module to your Laptop and open CIRCA software

Step 7) Open the existing project that you have saved in the IR reader, for e.g.

Step 8) Add your C-Bus Groups and transfer it to the NIRT unit

Step 9) Once it is transferred, you can use your C-Bus module to activate the remote application.

Step 10) IR emitter lead has to be placed on the IR port of the receiver unit for eg; TV, DVD etc.

By following the given steps you can integrate C-Bu s NIRT module with your Keypad for your IR remote application

Thanks

Download - Wiser-NIRT Programming Guidelines

Top Related