wifi网络摄像机操作

插上电源/即可监看

首次使用, 只需按下面 4点操作即可.

1. 手机或电脑上网www.scc21.net下载相应<平果/安卓>客户端.

2. 设备插上电源等待 20秒后，手机 wifi连接其热点 Aimer88<密码 12345678>后, 打开手机客户端---点本地--点摄像头名称右旁的兰色前头 “>”---点无线网络设置---正确输入本地路由器名称和密码---确定. 返回客户端主页.

3. 将设备上的’确定/复位’ 孔按下去， 等待 30秒后.

4. 手机输入设备上的摄像头名称和密码, 登录;即可远程监控.

温馨提示: 对不同的网络环境需将设备上的”确定/复位” 孔按上来, 再进行上面 2-4的操作.

确定/复位孔

相关参数名称 WIFI/IP网络摄像机视频格式 AVI

视频编码 M- JPEG

视频分辩率 640*480 VGA

网络传输分辩率 320*240 QVGA

视频帧率 10fps±1fps

传感器 1/3" 彩色CMOS

天线 2.4G 802.11n WIFI内置天线存储 支持 TF卡，手机容户端存储播放软件 操作系统自带或主流影音播放软件影像比例 4：3

支持系统 Windows ISO Android

电源电压 交流 220伏

Wifi network camera operation

Plug in the power / monitor

For the first time, simply press the following 4 operations.

1. go to Internet www.scc21.net with your phone or computer to download the appropriate

<apple / Andrews> client.

2. Wait 20 seconds after the device is plugged in, the phone wifi connection with it’s hot point

Aimer88 <password 12345678>, open the local phone client --- point to point the camera right

next to the name of the head of the blue ">" --- point to wireless network settings correctly enter

the local router name and password --- OK. returned to the client home page.

3. The 'OK / Reset' hole press down, wait for 30 seconds after the device.

4. Enter the phone camera name and password on the device, log in; you can RMON.

Tips: for different network environments need to "OK / Reset" hole on the device by up, then the

operation of the above 2-4.

                               OK / reset hole

Parameters

Name WIFI / IP network camera

AVI video format

M- JPEG video encoding

Video resolution 640 * 480 VGA

Network transmission resolution 320 * 240 QVGA

Video frame rate 10fps ± 1fps

Sensor 1/3 "Color CMOS

Antenna 2.4G 802.11n WIFI built-in antenna

Storage support TF card, mobile phone client storage capacity

Playback software that comes with the operating system or mainstream audio and video playback

software

Image ratio 4: 3

Support system Windows ISO Android

Power supply voltage AC 220 V