Download - Unisan Catalogue Spill Containment and Storage

SpillContainment & Storage

Spill Containment & Storage 30Bunded Drum Storage Workfloors 31Poly Drum Spill Pallets 32Drum Bunding 33Portable Spill Pallets 34Poly Containment Products 35General Drip Trays 37Drum Bund Trolleys 38Overpack Drums & Funnels 39Steel Drum Containment Products 40IBC Spill Pallets 42IBC Containment Products 43Steel Storage Cabinets for IBC's 44Steel Storage Cabinets for Drums 45Bund & Tank Lining Systems 46Hazardous Storage Cabinets 47Diesel Fuel Transport & Storage 49 Tank Solutions Pumps & Accessories 55Oil Storage Banks 56Plastic Fuel Storage Tank Solutions 57Commercial Rainwater Storage 58Poly Power Washers 59Fluid Transfer Management System 60Drum Taps & Vents 62Drum Pumps 63Electric Pumps, Drums & Accessories 64Storage Boxes 65Storage Bins & Tool Boxes 66Pallet Storage Boxes 67Storage Containers 68

Spill Containment &

Storage

P.32Drum Spill Pallets

P.49

P.63Drum Pumps

Fuel Transport and Storage Tank Solutions

29

Spill Containment &

Storage

T 0845 0700 624 F 0845 0700 623 E [email protected] W www.unisanuk.com

Spill Containment & Storage Introduction

Containment and Storage Solutions

Benefits to you…– Improves your working environment and helps to

keep your workplace clean, tidy and efficient– Fulfil your environmental responsibility and comply

with Pollution Prevention Guidelines– Safe storage of drums and IBCs– Protect the environment

A spill on site could lead to huge costs for your company, if the correct measures are not taken

Can you afford for your corporate image to be damaged by embarrassing fines and press headlines if a spill caused environmental damage?

Is your site fully covered and protected from the risk of spills?

Poor storage of oils, chemicals and other materials represents a major risk to the environment

A wide variety of potentially polluting liquids are routinely distributed, stored or collected in 210L drums and 1,000L IBC'sAccidental leakage or spillages can lead to the pollution of the ground (soil) and the waterways (streams, rivers, lakes, canals, docks etc). In most cases, such incidents can be prevented if appropriate measures are taken at an early stage

More and more companies throughout the UK are increasingly concerned with minimising their impact on the environment and demonstrating legal and regulatory compliance

Pollution Facts from The Environment Agency– Oil is a particularly harmful pollutant. A small amount of oil

causes a large problem. 5L of oil can cover an area of water the size of two football pitches

– Just 1L of solvent is enough to contaminate 100,000,000L of drinking water

Important Regulations & Pollution Prevention Guidelines‘The Control of Pollution (Oil Storage) Regulations 2001’ and ‘The Water Environment (Oil Storage) Regulations 2006’, require that secondary containment, such as a bund or drip tray must be provided to catch any leaks and spillages from drums, IBCs and storage tanks. These apply to all premises storing more than 200L on site

As set out by the Environment Agency for England and Wales, the Pollution Prevention Guidelines (PPG 26) for storing and handling of drums and IBCs, defines the requirements that secondary containment must achieve:

The secondary containment must be sufficient to contain at least 110% of the maximum contents of an oil tank, mobile bowser, IBC or drum greater than 200L. Drip trays must be able to hold at least 25% of the drum volume

Where more than one container is stored, the secondary containment should have the capacity of storing 110% of the largest container or 25% of the total volume of the containers being stored, whichever is greater

The Environment Agency is responsible for enforcing these regulations. Refer to the PPG regulations for full details

Spill Containment &

Storage Introduction

Protect our Environment

30

Spill Containment &

StorageSpill Containm

ent & Storage


Bunded Drum Storage Workfloors

Bunded Poly Workfloors

features:– Moulded polyethylene workfloors for internal storage of 210L drums– Ideal for use as a static spill containment area or as an internal liquid dispensing area– Use as a quarantine area for leaking containers or a machine part cleaning area– Units can be joined together using joining strips and connectors to provide

workfloors as large as required– Strong and durable platform, which is removable for easy cleaning– Slip resistant surface on ramp and platforms for safe use– Heavy duty access ramp locks onto workfloor with integrated locating pins and user

friendly gradient for easy loading

Simple and easy to connect and join together to create a large workfloor

code description size (w x d x h) mm capacity

PB7630 2 x 205L Drum Workfloor 1600 x 800 x 150 120L

PB7631 4 x 205L Drum Workfloor 1600 x 1600 x 150 240L

PB7632 4 x 205L Drum (In-Line) Workfloor 2490 x 860 x 150 300L

PB7633 Ramp for Poly Workfloor 810 x 1290 x 180 n/a

PB7634 Workfloor Connector Strip Long 1557 (Length) n/a

PB7635 Workfloor Connector Strip Short 757 (Length) n/a

PB7636 Workfloor Connector Cross Piece 80mm Dia n/a

Bunded Drum

Storage Workfloors

Is this your current method of drum storage...?

PB76324-Drum In-Line

PB76302-Drum

FOR IBC SPILL

PALLETS SEE

PAGE 42

PB76314-Drum

PB7633Ramp

31

Spill Containment &

Storage


All Weather Cover

features:– Keep your drums dry and protected outdoors– Helps prevent bunds from filling with water– Strong steel frame and waterproof polythene cover– Quick and simple to erect– Easy to keep clean

210L Drum Spill Pallets

features:– Approved for storage of 210L drums to help your company comply with current storage regulations– Help to improve your housekeeping on site– Wide range available; spill pallets for 1 to 8 drum capacity– Very tough and durable products made of polyethylene– Corrosion free, suitable for use with most liquids– Compatible with most forklifts and pallet trucks; easy to move around site– Removable grating for easy cleaning and inspection of sumps


PB7626 4 x 210L Drum Spill Pallet c/w All Weather Cover & Frame

1415 x 1310 x 2070 410L


PB7620 1 x 210L Drum Spill Pallet 900 x 700 x 525 225L





FOR STEEL BUNDED SPILL PALLETS, PLEASE SEE PAGE 40

Poly Drum Spill Pallets

Poly Drum

Spill Pallets

FOR DRUM

FUNNEL

SEE PAGE 39

32

Spill Containment &

Storage


Bunded Hardcover Drum Storage Unit

features:– Rigid, double walled, chemical resistant and weather-tight

polyethylene hardcover– Ideal for outdoor storage of 210L chemical and oil drums– Tall headspace easily accommodates rotary pump equipment

and conical funnels– Roll-top door design allows for use in limited space or next to

buildings where swing doors would be a problem– Can be padlocked shut to secure goods – Forkliftable from both sides, whilst empty– Large internal record/data storage pockets– 2-drum and 4-drum options


PB7660 2 Drum Hardcover Unit 1565 x 995 x 2110 250L

PB7661 4 Drum Hardcover Unit 1565 x 1620 x 2110 250L

Drum Bunding

Drum Dispensing Bund and Stacking Rack

features:– Ideal for easy and safe storage of 210L drums– Maximise floor space by stacking 4 steel drums horizontally– Dispense from all four drums at any time – simple and

convenient– Any leak or drips will be fully contained in the large integral sump– Made from strong and durable polyethylene– Easy to position with forklift truck


PB7650 Poly Dispensing Bund 1375 x 1350 x 635 450L

PB7651 Poly Cradle Stacker 1375 x 940 x 390 n/a

Spill Prevention Pallet Convertor

features:– Quickly transforms a standard wooden pallet into a safely bunded pallet– Simply place the pallet convertor over an existing pallet and it is ready to use– With a unique, compressible front which allows drums on a pallet to be lowered

in by a forklift– Lightweight and easy to clean and handle. Resistant to most chemicals– Made from strong and durable polyethylene– 2 and 4 drum versions available


PB7640 2 x 210L Drum Pallet Convertor 1500 x 1100 x 440 270L

PB7641 4 x 210L Drum Pallet Convertor 1500 x 1300 x 440 330L

Simple & Safe – Three Stage Operation

1.

2.

3.

Drum

Bunding

33

Spill Containment &

Storage


Portable Snap-up Spill Pallet

features:– Lightweight, portable spill pallet to help prevent spills in

temporary or remote locations– Unique snap-up support stays, create a sturdy sidewall

when opened– Made of yellow vinyl-coated polyester – high durability

and visibility– Resistant to fuels, chemicals and corrosive liquids– Folds up for compact storage and easy transport– Snap-up foam version also available. Snap-up, end sidewalls

made of foam, allow for continual drive-in and drive-out of vehicles quickly and easily. Ideal for maintenance of vehicles, machinery and tankers. POA


PB7710 Portable Spill Pallet (Chemicals) 1220 x 1220 x 200 302L



PB7715 Portable Spill Pallet (Fuels) 1830 x 1220 x 300 678L

PB7716 Portable Spill Pallet (Fuels) 1830 x 1830 x 300 1,018L




PB7700 Portable Spill Decking – 2 Drum 1220 x 610 x 80 57L


PB7702 Portable Spill Decking – 4 Drum In-line

2400 x 610 x 80 114L



PB7709 Black Internal Grate – 2 Drum 580 x 1220 x 50 n/a

Portable Spill Pallets

Portable Spill Decking

features:– A very cost effective solution for temporary storage of

hazardous materials– Provides protection during temporary storage of drums,

machine parts, tanks and generators– Can also be used as a wash-down area or pumping station– All sizes have the 80mm folding, foam sidewalls that easily

spring back into place– Folds up for compact storage and easy transport– The 4-drum unit holds one IBC; the 8-drum unit holds two IBCs– Black internal grates are purchased separately – one grate for

every two drums

Portable Spill Pallets

34

Spill Containment &


ent & Storage


Canister Dispensing Stand and Drip Tray

features:– Use to safely dispense from small canisters of up to 30L– Helps to eliminate the risk of a spill– Canister is securely mounted in the stainless steel cage– Simple to operate – suitable for use with acids and lyes– Drip tray is also ideal for the storage of small drums,

cans and bottles– Tray base is made of durable polyethylene and is

complete with steel grating

Pallet Racking Bund

features:– Turn standard pallet racking into bunded racking– A simple solution – very easy to install and keep clean– Use with your existing racking. Bund sits across the beams

and the pallet sits inside the bund– Ideal for selective isolation – allows the segregation of

water pollutants and hazardous materials– Made of durable and robust polyethylene.


PB5050 Canister Dispensing Stand 290 x 310 x 480 n/a

PB7731 Poly Drip Tray c/w Steel Grating 600 x 980 x 85 30L


PB7671 Pallet Rack Bund 1310 x 1310 x 210 220L


PB7601 Laboratory Spill Tray 630 x 560 x 70 9.5L


PB7735 Poly Sump Pallet c/w Steel Grating

1205 x 805 x 330 240L

PB7736 Canister Rack System – Single Shelf

1205 x 805 x 810 n/a

PB7737 Canister Rack System – Double Shelf

1205 x 805 x 1290 n/a

Poly Containment Products

Bunded Canister Rack System

features:– Ideal for storage of 25L drums and small containers– Very versatile, lightweight and compact system– Racking fits onto polyethylene sump pallet with steel grating– Sump pallet can either be positioned directly on the floor or

on a Euro-pallet– Single or double shelf rack systems available

Laboratory Spill Tray

features:– Helps reduce the risk of spills from liquids and chemicals– Ideal for mixing small containers on lab workstations– Large surface area holds 4 x 5L bottles, with large sump

capacity of 9.5L– Made from durable polyethylene– Removable grate for easy cleaning– Use chemical absorbent underneath

3.


35

Spill Containment &

Storage



PB7690 Small Drum Spill Pallet 800 x 400 x 155 30L

PB7691 Small Drum Spill Pallet (without platform)

800 x 400 x 155 30L



800 x 600 x 155 40L



1000 x 600 x 175 60L


PB7675 Small Poly Cabinet c/w 2 shelves

545 x 440 x 990 30L

PB7676 Medium Poly Cabinet c/w 3 shelves

650 x 570 x 1650 70L

PB7677 Large Poly Cabinet for 1 x 205L Drum

720 x 920 x 1840 250L

PB7678 Large Poly Cabinet c/w 1 shelf 720 x 920 x 1840 250L


Small Drum Spill Pallets

features: – Ideal solution for storing smaller drums and containers (25L

drums), especially where space is limited– Can be used as a work area for safe liquid dispensing– Stackable for easy transportation and storage– Lightweight and easy to clean with non-slip platform surface– Can be used without platform as large volume, versatile drip trays– Made from strong and durable polyethylene

Poly Storage Cabinets

features: – Polyethylene cabinets, all with lockable doors and built-in sumps– Suitable for a wide variety of storage applications from aerosols,

5L to 210L drums and batteries– Low maintenance and easy to clean– Some cabinets come complete with storage shelves– Very strong and robust construction


Wheeled Spill Tray

features:– Unique design means it can be easily slid under plant machinery

and vehicles when being refuelled to contain any spillages– Any spillage during use, flows down the channels into the

catchment area in the hollow base– Very durable polyethylene, lightweight and easy to use


PB7730 Wheeled Spill Tray 915 x 660 x 240 50L

30L

40L

60L

30L

40L

60L

36

Spill Containment &

Storage


WE RECOMMEND THE USE OF OUR ABSORBENT PADS AND CUSHIONS WITH THESE DRIP TRAYS. PLEASE SEE OUR MAINTENANCE AND OIL ONLY ABSORBENTS ON PAGES 5 – 11

General D

rip Trays

code description size mm capacity

DT7608 Poly Drain Bowl 440 Dia x 150 14L

Poly Drain Bowl

features:– For safe and easy draining of oil from vehicles and machinery– Complete with handles and pourer– Made from strong and durable polyethylene


DT7601 Pk of 5 Drip Trays 410 x 310 x 45 5L

DT7607 Pk of 5 Large Drip Trays (Pouring Lip) 530 x 400 x 95 16L

DT7609 Extra Long Drip Tray 1200 x 550 x 40 28L

DT7611 Large Octagonal Drip Tray 900 x 900 x 80 40L

General Drip Trays

features: – Help keep your housekeeping in order and reduce risks of slips and trips– Ideal for catching minor leaks and drips from drum taps, machinery, pipes etc– Compact to fit in small areas where space is limited– Lightweight and stackable – easy to transport and store– Made from strong and durable polyethylene

GENERAL DRIP TRAYS

Pouring Lip

DT7607

DT7611

DT7609

DT7608

DT7601

37

Spill Containment &

Storage


Drum

Bund Trolleys

Bunded Single Drum Trolley

features:– Move drums with ease and without the risk of spills occurring– Ideal as a mobile dispensing unit and sump– Made of durable, double-walled polyethylene – With ribs in dispensing area to keep containers above minor spills– Easy to handle due to well balanced design, with barrel tightly

secured with a ratchet strap– Safety support lock for easy vertical loading and storage

Multi-purpose Sump Trolley

features:– Suitable for 2 x 210L drums– Made of durable polyethylene– With steering bar and castor wheels– Available with or without steel grating– Can be transported easily on a pallet after removing

wheels (same size as a Euro pallet)


PB7680 Bunded Single Drum Trolley 1740 x 815 x 680 250L


PB7683 Multi-purpose Sump Trolley c/w steel grating

1290 x 805 x 1040 224L

PB7684 Multi-purpose Sump Trolley without steel grating

1290 x 805 x 1040 250L


PB7685 Premium Mobile Bunded Spill Cart

1690 x 740 x 1120 216L

Drum Bund Trolleys


PB7682 Mobile Drum Dispensing Scooter

725 x 725 x 990 30L

Mobile Drum Dispensing Scooter

features:– Dispense from your drums safely whilst transporting them

around the factory or workshop– Contain incidental spills and drips that often occur during

vertical dispensing– Lightweight and easy to handle, with 4 castor wheels– Base part made of non-corrosive polyethylene

Premium Mobile Bunded Spill Cart

features:– Makes the moving of drums and cans, safe and hassle free– Helps to eliminate the risk of spills, with large sump– With easy-roll, wheels and ergonomic handle, for easy

manoeuvring– Includes tool storage tray to keep tools clean and near to hand – Removable grating for easy cleaning – Made of durable polyethylene

38

Spill Containment &

StorageO

verpack Drum

s & Funnels


Overpack Salvage Drums

features:– Excellent solution for safely containing hazardous materials,

including acids, corrosives from damaged drums and parts– Twist lid to secure. Providing you with a leak-free container– Double walled lid and ribbed body design gives extra strength– Version available for damaged and distorted or bowed drums– Made of durable, UV-protected polyethylene– UN Approved for transportation

Drum Funnel

features:– Covers entire drum top and ensures safe pouring and draining– Helps keep drum top clean and reduce the risk of spillages– Made of durable polyethylene with high chemical resistance– Complete with lid to prevent dirt, dust and other foreign

objects entering the funnel and drum opening– Helps to reduce chances of dangerous slip and trip accidents


PB7646 Salvage Drum (210L Drum) 570 Dia. x 760 114L

PB7647 Salvage Drum (210L Drum) 800 Dia. x 1050 360L

PB7648 Salvage Drum (Damaged 210L Drum)

800 Dia. x 1140 398L

code description size mm

PB7625 Drum Funnel 640 Dia. x 150 (h)


PB7655 Oil Saver Drum Topper 610 Dia. x 510

Overpack Drums & Funnels


SB8250 Single Steel Bund (210L Drum) 750 x 750 x 1150 250L

Single Steel Bund – 210L Drums

features:– Unique way of ensuring your 210L drums comply with drum

storage regulations– Innovative design provides easy handling in a secure and

lockable bund– Handle with a forklift, pallet truck or a crane– Heavy duty steel construction

Oil Saver Drum Topper

features:– Pays for itself with first drum of liquids dispensed! – Saves over 18L of liquid per drum that is lost during routine

dispensing – Equipped with a stainless steel mesh strainer to catch debris

and re-direct liquids to the drum – Easy to install and use. Works with all types of drum pumps– Made of durable polyethylene

FOR IBC DRUM

FUNNEL

SEE PAGE 43

39

Spill Containment &

Storage


Steel Drum

Containment Products

Steel Drum Containment Products

Galvanised Drum Spill Pallets

features: – Durable construction to withstand heavy usage– Removable grate allows easy cleaning and inspection of sump– Can be forklifted from either side for ease of handling– Stackable design saves space when pallets not in use– Galvanised to help withstand rust and heavy handling– Option of 1, 2 or 4 drum spill pallets– Additional extra: 2 drum galvanised steel dispensing frame, to be

used with 4 drum spill pallet. Order separately to the spill pallet

Benchtop Small Container Sumps

features: – For storage and decanting of fuels and hazardous

materials from small containers– Ideal for workshops, garages and laboratories– Can also be used as a drip tray– Easy to clean and very durable– Galvanised steel

Steel Bunded Flooring

features: – For the storage of potential water pollutants and flammable

liquids where stringent regulations apply– Helps you meet requirements of environmental regulations

when storing containers, dispensing, refilling or transferring potential water pollutants

– A modular system that can be placed together, which allows you to have a flexible and specific system to suit your requirements

– Strong enough to accommodate forklift trucks and vehicles– All steel decking is painted and the ramps are galvanised– 55mm or 110mm flooring heights available

THE STEEL BUNDED FLOORING IS MANUFACTURED TO ORDER AND IS AVAILABLE IN MANY DIFFERENT MODULAR OPTIONS – PLEASE CONTACT US TO DISCUSS YOUR REQUIREMENTS OR TO REQUEST A PROPOSAL

FOR POLYETHYLENE BUNDED WORK FLOORS AND SPILL PALLETS, PLEASE SEE PAGE 31 – 32


SB8280 Single Drum Galvanised Spill Pallet

900 x 800 x 385 150L

SB8281 Double Drum Galvanised Spill Pallet

1300 x 800 x 385 240L

SB8282 Four Drum Galvanised Spill Pallet

1300 x 1300 x 385 400L

SB8283 Four Drum Galvanised Spill Pallet (In-line)

2550 x 800 x 385 480L

SB8284 Two Drum Galvanised Dispensing Frame

1300 x 750 x 600 n/a


SB8296 Small Container Sump 1000 x 400 x 65 24L




MADE TO

MEASURE

POLY BUND

– POA

40

Spill Containment &

Storage


Steel Drum Containment Products

Stackable Galvanised Drum Spill Pallets

features: – Durable construction to withstand heavy usage– Safety guards fitted on 3 sides – Side guard options of either steel bars, sheet metal or mesh infill– Removable grate allows easy cleaning and inspection of sump– Stackable system enabling storage of large quantities on a small

footprint area (max. 2 units high)– Can be forklifted from either side for ease of handling

Steel Drum Cabinets

features: – Durable construction to withstand heavy usage– Removable grate allows easy cleaning and inspection of sump– Fitted with vents to allow air circulation– Lockable, weatherproof cover operated by gas struts for easy

opening and closing – Can be forklifted from either side for ease of handling – Flammable version also available, with fully ventilated panels

on all sides, including doors

Stacking Drum Rack SystemFlexible, expandable storage system for 210L steel drums

Drum Rack Unit– Strong, welded steel construction– Racks are stackable (max. 3 units high)– Each rack holds 2 drums– With fork pockets for easy transportation of rack by forklift– Red epoxy paint finish

Sump Unit– Provides bunding for steel racks– Manufactured from steel sheets with fully welded seams– Grey epoxy paint finish

Drum Rotating Set – Optional Extra– A simple but very useful addition to the racking system– Fitted with 4 x 65mm dia. nylon rollers– 1 set of drum rotators per drum position– Zinc plated finish


SB8285 4 Drum Stacking Spill Pallet – Metal Bar Sides

1350 x 1260 x 1460 450L

SB8287 4 Drum Stacking Spill Pallet – Metal Sheet Sides

1350 x 1260 x 1460 450L

SB8286 4 Drum Stacking Spill Pallet – Metal Mesh Sides

1350 x 1260 x 1460 450L


SB8288 4 Drum Cabinet 1350 x 1260 x 1540 450L

SB8289 4 Drum Cabinet (Flammables) 1350 x 1260 x 1540 450L


SB8213 Drum Rack Unit – for 2x210L Drums

1490 x 515 x 390 n/a

SB8214 Sump Unit for Drum Rack 1250 x 1000 x 300 250L

SB8215 Drum Rotating Set n/a n/a

Steel Drum

Containment Products

Drum Rotating Set

41

Spill Containment &

Storage


IBC Spill Pallets

IBC Spill Pallets

Poly IBC Bunded Spill Pallets

features: – If a spill occurs from an IBC there is a huge risk of contamination and damage to the environment,

resulting in massive clean-up costs and fines.– Due to the large volumes being stored it is very important that IBCs are adequately and safely bunded– Easy to keep clean, with removable grates– Made of durable polyethylene with high chemical resistance– With forklift points, to allow transportation around the workplace– Built-in and add-on dispensing area options to catch any drips or minor spills– Single or double IBC options available


PB7610 Single IBC Spill Pallet 1450 x 1450 x 1000 1100L

PB7611 Single IBC Spill Pallet with Built-in Dispensing Area 2000 x 1490 x 765 1100L

PB7612 Double IBC Spill Pallet 2450 x 1450 x 575 1100L

PB7613 Add on Dispenser for Double IBC Pallet 640 x 590 x 665 100L

PB7617 Add on Dispenser for Single IBC Pallet 640 x 590 x 1065 100L

Add-on dispensing area Built-in dispensing area

FOR DRUM

SPILL PALLETS

SEE PAGE 32

42

Spill Containment &


ent & Storage


IBC Containment Products


PB7614 Single IBC Pallet – All Weather Cover

1760 x 1350 x 2410 1100L

PB7615 Double IBC Pallet – All Weather Cover

2560 x 1350 x 2210 1140L

Covered Poly IBC Bunded Spill Pallets

features: – A cost effective outdoor storage shelter for your drums and IBCs– Protects the bund from filling with rainwater– Strong steel frame and polyethylene cover


SB8290 Single IBC Steel Spill Pallet 1340 x 1650 x 620 1100L

SB8291 Double IBC Steel Spill Pallet 2720 x 1650 x 350 1100L

SB8292 Single IBC Steel Spill Pallet – Dispensing Stand

1340 x 1650 x 1080 1100L

SB8293 Double IBC Steel Spill Pallet – Dispensing Stand

2720 x 1650 x 1080 1100L

SB8294 Single IBC Steel Spill Pallet – Disp. Stand/Splash Guard

1340 x 1650 x 1780 1100L

SB8295 Double IBC Steel Spill Pallet – Disp. Stand/Splash Guard

2720 x 1650 x 1780 1100L

Steel IBC Spill Pallets

features: – Durable construction to withstand heavy usage– Removable grate allows easy cleaning and inspection of sump– Can be forklifted for ease of handling, use fork extensions

when needed (See pg 100)– Dispenser captures any spillages and channels liquid back

into spill pallet– Optional splash guard helps protect surrounding work areas

IBC Containment Products


PB7616 IBC Funnel 640 Dia. x 150

IBC Funnel

features: – For safer and easier pouring into IBC's – helps to reduce the

risk of spillages– Made of durable polyethylene with high chemical resistance– Complete with lid, to prevent dirt, dust and other foreign

objects entering the funnel and the IBC opening

FOR DAY TO

DAY ABSORBENTS

FOR MINOR

SPILLS SEE

PAGES 6 & 14

43

Spill Containment &

Storage


Steel Storage Cabinets for IBC's


IS7820 Single IBC Steel Cabinet – Lid & 2 hinged doors

1350 x 1660 x 1900 1100L

IS7821 Single IBC Steel Cabinet – Dispenser & 2 hinged doors

1350 x 1660 x 2580 1100L

Single Steel Storage Cabinets for IBC's

features: – Durable construction to withstand heavy usage– Removable grill allows easy cleaning and inspection of sump– Fitted with vents to allow air circulation– Weatherproof cabinet to protect contents from contamination– Lockable cabinet for security, which can also be moved easily by forklift– Easy loading and unloading of IBCs

code description No. of Levels

size (w x d x h) mm capacity

IS7801 4 x IBC Cabinet – Sliding Doors 2 3000 x 1650 x 3350 1125L





Multiple Steel Storage Cabinets for IBC's

features: – Keeps all your chemicals and liquids in one central location for easy

stock-taking, security and housekeeping– Helps prevent environmental pollution by containing accidental spills

or any leaking containers– With removable galvanised grid flooring and shelving– With high and low level flame arrested vents– Fully welded, leak proof sump over the entire base area– Epoxy coated sump for corrosive resistance (acids and alkalis)– Constructed from profiled mild steel sheets– Sliding, hinged or roller shutter doors available– The standard paint colour finish for our Multiple Drum Steel Storage

Cabinets is Blue – other colours available upon request

Additional Extras Available – Temperature Control– Lighting– Extraction– Insulated sides– Lock options available

The Multiple IBC Steel Storage Cabinets listed below are some of our most popular sizes – other sizes and combinations are available upon request

Steel Storage Cabinets for IBC's

44

Spill Containment &

Storage


Steel Storage Cabinets for Drums

Multiple Steel Storage Cabinets for Drums

features: – With same features and benefits as our Multiple IBC Steel Storage Cabinets – The standard paint colour finish for our Multiple Drum Steel Storage

Cabinets is Blue – other colours available upon request– Roller shutter door option available upon request

The Multiple Drum Steel Storage Cabinets listed below are some of our most popular sizes – other sizes and combinations are available upon request

Demountable Steel Storage Container with Bunded Floor

features: – Affordable, mobile and very versatile storage container– Fully bunded unit – ideal for the construction industry, local authorities,

plant hire, private sector etc. Ideal for use at remote work sites– Designed to help protect the environment by eliminating accidental spillages– Ideal for storing oils, fuels, paints and inks etc– Fully galvanised with double wing doors– Made from zinc coated steel sheeting– Only a socket set required to erect– No crane necessary for loading and offloading

AccessoriesAnti Theft Security Bar offers additional security

Shelving System for inside container– 3 storage shelves– Useful for storing small drums, bottles and cans etc– Very strong, made of galvanised steel– Adjustable height

code description No. of Levels

size (w x d x h) mm capacity

DS7801 8 x 205L Drum Cabinet – Sliding Doors

1 3000 x 1650 x 1690 880L

DS7802 8 x 205L Drum Cabinet – Hinged Doors

2 1500 x 1500 x 3100 420L


2 3000 x 1650 x 3100 880L


2 5900 x 1650 x 3100 1730L


2 8800 x 1650 x 3100 2500L


2 6400 x 3100 x 3100 3300L


DS7830 Bunded Steel Storage Container 2250 x 2200 x 2200 202L

DS7835 Bunded Steel Storage Container 3000 x 2200 x 2200 275L

DS7840 Shelving system including 3 shelves 2000 x 500 n/a

DS7841 Anti-theft Security bar for Double Door n/a n/a

Steel Storage Cabinets for Drum

s

ASSEMBLE

IN UNDER 30

MINUTES!!!

45

Spill Containment &

Storage


Bund & Tank Lining System

s

Bund & Tank Lining Systems

GRP Bund Lining SystemBunds can soon lose their resistance to contain constant drips and spillages through chemical erosion, accidental wall damage and deficient floor joints etc. Poor or incorrect construction of the bund can also allow spillages to easily penetrate the secondary containment area which is most commonly the wall to floor joint. This has Health & Safety implications, and the potential to contaminate the surrounding area and damage the environment which both in turn will affect profits and reputation

Government legislation was implemented in 2005 for all bunds which contain oil storage vessels. Regulations state that the secondary containment area should be impervious to oil and water, should the contents of the primary vessels be breached

In our experience and with its proven track record, GRP (Glass Reinforced Plastic) is the most superior system for its effectiveness to contain liquids

Our system will reinstate the integrity of the bund; it will cope with normal structural movement, is impact resistant and will provide a seamless long lasting maintenance free finish. Our lining system will breach any holes or cracks within the bund that paint or coatings simply cannot do

Whilst our system is suitable for oils; it will also provide effective containment for the most aggressive chemicals

Tank Lining SystemExtensive savings can be made by refurbishment of your tanks; not only will the outlay be less but the life of the tanks will be significantly extended

Leaking and corroded tanks can cause damage to the environment and to the health and safety of personnel, and in turn will cause product loss and wastage which will affect company profitability. Our tank repair and refurbishment service offers on site solutions for leaking, corroded and damaged tanks. Our preferred form of preparation is grit blasting carried out by our trained staff to ensure that preparation is always to the required standard

We utilise a wide range of materials to suit your storage specifications including GRP, epoxies, urethanes and sheet plastics to name but a few

Our lining systems are completely seamless, tough and durable and will be designed to meet your containment needs, from specifications for the most aggressive chemicals through to potable liquids

We understand that down time costs money. We are always prepared to work with our customers to ensure that down time is kept to a minimum

Whatever your containment needs, we can provide a lining solution to meet your requirements

Please contact us, with your requirements, for a quote or to arrange a site visit

Before

Before BeforeAfter After

After

46

Spill Containment &

Storage


Hazardous Storage Cabinets

code description size (w x d x h) mm doors shelves

HS7711 Hazardous Cabinet 350 x 300 x 700 1 1


HS7713 Stand for HS7712 460 x 460 n/a n/a


HS7715 Stand for HS7714, 16, 17 900 x 460 x 500 n/a n/a





HS7720 Hazardous Wall Cabinet 850 x 255 x 570 2 1


HS7730 Mobile Hazardous Cabinet

900 x 460 x 840 2 1

HS7731 Mobile Hazardous Cabinet

900 x 460 x 1040 2 1

code description size (w x d x h) mm

HS7701 Hazardous Floor Storage Chest 1170 x 460 x 610

HS7702 Hazardous Floor Storage Chest 610 x 340 x 510

Hazardous Storage CabinetsIt is vital that employers and employees comply with the control of hazardous substances in all working environments. Our range of cabinets are designed to help provide safe and secure storage of hazardous substances as demanded by COSHH regulations

features: – 2-Point locking handles are set into the cabinet door, to help ensure no ‘snags’ occur as people and equipment move past– Adjustable spill-retaining, galvanised shelves for superior spill management– Integral liquid-tight sump encourages the correct handling of spills through the use of absorbents– Bright yellow coating ensures the cabinets are clearly identifiable in the workplace– Stands raise cabinets by 500mm with adjustable feet for uneven surfaces– Wall cabinet version is also available

Hazardous Storage Floor Chests

features: – Floor cabinets have a welded integrated sump– With angled lid to discourage article placement– Hasp and staple lock included

Mobile Hazardous Storage Cabinet

features: – Easy to manoeuvre around the workplace– Ideal for individual workstations– Lockable castor wheels


30 OR 90

MINUTES FIRE

RATED VERSIONS

ALSO AVAILABLE

– POA

47

Spill Containment &

Storage





HS7740 Acid & Alkali Cabinet 900 x 460 x 700 2 1


HS7742 Stand for HS7740/41 900 x 460 n/a n/a


HS7744 Acid & Alkali Wall Cabinet

850 x 255 x 570 2 1

HS7750 Mobile Acid & Alkali Cabinet

900 x 460 840 2 1

HS7751 Mobile Acid & Alkali Cabinet

900 x 460 x 1040 2 1


HS7760 Flammables Cabinet – With Stand Built In

900 x 610 x 1200 2 2

HS7763 Flammables Floor Storage Chest

1170 x 460 x 610 n/a n/a

Acid and Alkali Substance Storage CabinetUse of caustic materials in the workplace can present many hazards, particularly if acids and alkalis are stored incorrectly or with other chemicals. Our range of acid and alkali substance storage cabinets enable safe and identifiable storage in the workplace

features: – Same features and benefits apply as the hazardous

substance storage cabinets, shown on page 47– Stands and other size cabinets available upon request

Petroleum and Flammable Liquids Storage Cabinets and Floor Chests

features: – If stored incorrectly, petroleum and flammable liquids can

leak or spill causing damage and pollution.– These cupboards promote safe storage, handling and disposal

practices– Powder coated red – clearly identifiable– Same features and benefits apply as the hazardous substance

storage cabinets, shown on page 47

Wall Cabinet

48

Spill Containment &

Storage


code description size (w x d x h) mm pump capacity

FS6000 UniMaster™ Poly Diesel Tank 770 x 540 x 500 12v Pump 100L

FS6002 UniMaster™ Poly Diesel Tank 1000 x 750 x 605 Manual 200L


FS6005 UniMaster™ Poly Diesel Tank 1620 x 750 x 665 Manual 400L


UniMaster™ Poly Diesel TanksHelps increase productivity by reducing many 20L can refill trips, while keeping your diesel engines running on site!!!

features: – Robust polyethylene diesel tank– Hinged lockable cover designed to protect pump, filler nozzle and fittings– Lightweight and easy to manoeuvre by hand when empty– Quality 12v 40Lpm fuel pump fitted – c/w 4m hose, auto nozzle and 4m cable– Manual fuel pump option also available for 200L and 400L tank sizes– 200L and 400L models are UN approved for legal transport of fuel – Compact, simple and easy to use

Diesel Fuel Transport & Storage Tank Solutions

Diesel Fuel Transport and Storage Tank SolutionsPreserving the environment for the future is a priority for us Our wide range of high quality, environmental compliant fuel transport and storage tanks help your company to protect the environment and fully comply with the latest legislation, we have tank solutions for a wide range of industrial and agricultural applications

Helping to keep you safe and legal whilst transporting fuel.Bulk purchasing of fuel will save you time and money. Also keep on the move when fuel strikes are on!!!

Important Diesel Transport RegulationsPlease refer to the following regulations and guidelines for more information regarding Diesel Transport – The Carriage of Dangerous Goods and Use of Transportable

Pressure Equipment Regulations 2009 These regulations enforce the European-wide agreement on the carriage goods by road set out in the document known as the ADR regulations. This document is revised every 2 years and the current edition was issued in 2009. ADR regulations are highly prescriptive in all matters connected with diesel transport on the road

Important Diesel/Oil Storage RegulationsPlease refer to the following regulations and guidelines for more information regarding Diesel and Oil Storage – The Control of Pollution (Oil Storage) (England) Regulations 2001– The Water Environment (Oil Storage) (Scotland)

Regulations 2006– PPG2 – Pollution Prevention Guidelines – Above Ground Oil

Storage Tanks– The Pollution Prevention Guidelines are produced by

the Environment Agency for England and Wales. PPG2 emphasises the requirements of the regulations, but in addition, gives many helpful recommendations on good practice, so much so that PPG2 is often quoted as the standard that has to be met. PPG2 is the most relevant guideline but other relevant guidelines are:

– PPG1 – General Guide to the Prevention of Pollution– PPG 26 Storage and Handling of Drums and Intermediate

Bulk Containers

=

Diesel Fuel Transport &

Storage Tank Solutions

49

Spill Containment &

Storage





FS6010 Easi-Fuel™ Fuel Tank c/w Manual fuel pump kit 1160 x 815 x 900 390L

FS6011 Easi-Fuel™ Fuel Tank c/w 12V fuel pump kit 1160 x 815 x 900 390L

FS6015 Easi-Fuel™ Wheeled Fuel Tank 600 x 510 x 1000 105L


UN Approved Tanks – Stay legal whilst transporting fuel

LockableKey lock in lid for security of fuel

Poly inner tank Keeps fuel clean and reduces weight of tank

Integrated hand pump (option) Easy dispensing. Can be kept in place during transport

Fast fill pointFeed and return mounts

Weatherproof bund Inner tank fully enclosed in 110% weatherproof bund

Forklift pockets on all sides Ease of handling-wheeled version available

Hose letterboxesLid locked whilst supplying back-up fuel

Unique dimensions Pallet sized for ease of transportation

Easi-Fuel™ Diesel Fuel Tank

features: – Poly in steel UN 1202 Approved IBC for transporting fuel on the highway– Weatherproof 110% bund to ensure compliance with PPG2 Regulations– Pallet sized for optimum logistics and can be used in the back of most pickups– Capacity under 1,000L – no ADR Driver Training required– Manual or 12V fuel pump options, (both with 2m hose and trigger nozzle)

Easi-Fuel™ Wheeled Diesel Fuel Tank

features: – Easy to handle, wheelie-bin style design– Allows you to move your fuel supply easily around the site and take the

fuel to machinery/vehicles if needed– Ideal for access where space is limited – fits in lifts and through doorways– Manual fuel pump with 2m hose and trigger nozzle– c/w lockable lid and forklift pockets

50

Spill Containment &

Storage



FS6020 Bunded IBC – Skid Mounted 1525 x 1080 x 1225 950L

FS6021 Bunded IBC c/w Manhole – Skid Mounted

1680 x 1100 x 1360 950L

FS6022 Bunded IBC c/w Manhole – Skid Mounted

1310 x 2400 x 1470 2000L

Bunded IBC – Skid MountedUse to transport fuel on the public highway according to the ADR regulations

features: – Simple and effective UN Approved 110% bunded tank– Cabinet easily accessed from ground level– Skid mounted – Ideal for transporting on a flat bed truck– Side access pump cabinet – easy access for operation– Forklift pockets – for easy handling


Access manholeMaintenance and inspection of inner tank (Optional extra)

Internal baffles for safe towing Prevent fuel surge during transport and handling

Full loading lift eyeEase of handling even to awkward locations

Lockable weatherproof cabinet Enclosing pump, connections, hoses – all drips contained

Bund dipstickChecking for liquid in bund

Feed and return hose letterbox Enables generator / heater to be run whilst cabinet is locked

Forklift pocketsEase of handling

Tie down pointsSecuring tank during transit

Sump plugDraining liquid from cabinet

Bund emptying pipeRemoval of liquid from bund

Padlock facilitySecurity of fuel and equipment



FOR ALL FUEL PUMP OPTIONS – SEE PAGE 55

51

Spill Containment &

Storage


Bunded IBC Highway Tow

features: – 110% bunded, UN approved fuel tank– Pump cabinet easily accessed from ground level– Mounted on a ‘T’ bar style trailer for highway transportation– Hot dip galvanised chassis for protection against corrosion– Rubber torsion suspension for soft ride– Height adjustable jockey wheel and ball or eye coupling– Drum type auto-reverse braking c/w hand parking brake– Tank mechanically removable from trailer for multiple uses– Optional extra – Rear Safety Light Board (c/w light board,

cable and plug)


FS6030 Bunded IBC – Highway Tow

2895 x 1550 x 1700 950L

FS6039 Rear Safety Light Board Kit

1400 n/a

ALL HAND-OPERATED AND ELECTRIC PUMP OPTIONS FOR THESE FUEL TANKS ARE SHOWN ON PAGE 55




Bunded IBC Manhole Highway TowAdditional benefits to those listed above are:

features: – With Access Manhole for easier cleaning/maintenance and

inspection of inner tank– Front chassis extension enables fitting of cabinets, large hose

reels, fire extinguishers etc– With rear support leg for greater stability when refuelling and

unit is uncoupled– Highway lighting, 7 pin plug and mudguards (EU specifications)– Lighting and number plate holder housed in protective channel

Smelly hands...? See page 155 for Power Wipes



2760 x 1550 x 1900 950L


1657 x 3520 x 1882 2000L

52

Spill Containment &

Storage


Diesel/Oil Storage Tanks

Benefits to you…– Bulk storage of waste or new oil – save collection/distribution costs– Independent fuel stations for your remote depots– Bulk purchasing of fuel will save you time and money– Keep on the move when fuel strikes are on– Increased operational efficiencies– 110% bund to comply with PPG2 Regulations for oil storage– Manufactured to BS 799 Part 5 Standard – Construction of Above Ground Oil Storage– Steel tank enclosed in steel, weatherproof outer bund – providing secure storage– Lifting eyes fitted for crane handling (empty only) and can be forklifted easily from either side

Oil Storage TanksAdditional benefits to those listed above are:

features:– In addition to the benefits listed above– Standard fitting includes tank contents gauge, 2” filler cap

and 2” vent cap– Fittings enclosed under lockable lid for additional security– With bottom outlet point – Larger size tanks also available (up to 60,000L)– For waste oil storage banks please see pages 56–57

Bulk Fuel Storage TanksAdditional benefits to those listed above are:

features:– Secure lockable bund compartment houses pump, nozzle,

hoses, feed and return connections– Feed and return hoses can be fed through letterbox enabling

generator to be run whilst compartment is locked – helps to prevent theft and vandalism

– Anti-siphon valve fitted to help prevent fuel theft and vandalism– Access manhole allows for maintenance and inspection of

inner tank– UN approved to be transported full of fuel (not part full)


FS6040 Oil Storage Tank 1800 x 750 x 1300 1,200L

FS6041 Oil Storage Tank 2300 x 1150 x 1300 2,200L


FS6050 Bulk Fuel Storage Tank 1200 x 1200 x 1490 975L

FS6051 Bulk Fuel Storage Tank 2120 x 1200 x 1490 2,160L

FS6052 Bulk Fuel Storage Tank 2400 x 1460 x 1490 3,000L




2" Mechanical Overfill Device – for hard fill

– Allows the filling of tank with confidence that it won’t over-spill

code description size

FS6045 Mechanical Overfill Device 2"

FOR BULK

WATER

STORAGE SEE

PAGE 58

53

Spill Containment &

Storage





Deluxe Bulk Fuel Storage TanksIn addition to the standard Bulk Fuel Storage Tank benefits, the Deluxe Bulk Fuel Storage Tank range features:

– Large secure cabinet with full height access door– Lockable cabinet houses pump reels, hoses, connections with extra storage space for drums, cans and spill kits– Spill sump in base of cabinet to contain any spillage or drips – smaller equipment can be placed on this for refuelling– 3-way locking system with unique “anti-levering” design on cabinet door for extra security– Door stay, holds door wide open to give greater access and prevent door slamming– Bund sensor to detect fluid in the bund– Extra feed and return ports for running auxiliary equipment like generators and heaters etc– Offset fuel fill pipe for rapid refuelling of tank (9,000L and 18,000L options only) – Larger tank sizes available (up to 60,000L)

Specialised Storage Tanks

– Our range of steel tanks can be supplied as suitable for storage of other liquids other than diesel and with different pump requirements

– Epoxy lined tanks are suitable for storing corrosive liquids, i.e. anti-freeze, coolants and glycol, etc

– Can be fitted with a range of fuel temperature control devices– Contact our specialist division to discuss how we can help fulfil your needs

Hanzl® Ultra Hand Scrubber Wipes

Stay clean whilst refuelling with our high quality Hanzl Ultra Hand Scrubber Wipes

Fit inside the tank cabinet using our stainless steel wall bracket – see page 155 for more details


FS6060 Deluxe Bulk Fuel Storage Tank 2250 x 1200 x 1620 2,200L







54

Spill Containment &

Storage


Pumps & Accessories

Pumps and accessories for Diesel Fuel Transport and Storage Tanks

code description feed size power flow rate litres/min

FS5000 Semi rotary hand fuel pump c/w mounting plate, strainer, 2m suction hose, 4m dispensing hose and manual trigger nozzle

1" Hand 20 – 40

FS5005 Electric 12 volt self-priming pump, c/w mounting plate, nozzle holder, strainer, 2m suction hose, 4m dispensing hose and auto shut-off nozzle with holder

1" 12v 38

FS5010 Electric 240 volt self-priming pump, c/w mounting plate, nozzle holder, strainer, 2m suction hose, 4m dispensing hose and auto shut-off nozzle with holder

1" 240v 56

FS5015 Cube 56 240V fuel pump, c/w in-built nozzle holder and auto pump switch off, flow meter, 4m delivery hose and auto-shut off nozzle

1" 240v 56

FS5020 Cube 70 240V fuel pump, c/w digital flow meter and fuel management system, 4m delivery hose, 50 user codes auto pump switch and auto nozzle

1" 240v 70

FS5025 Mechanical, 4-digit flow meter c/w totaliser and reset dial 1" n/a 20 – 120

FS5026 10 micron filter and housing for the removal of water and particulate 1" n/a 70

FS5027 10 micron water and particulate filter refill cartridge for above 1" n/a 70

FS5030 Manual trigger nozzle, c/w swivel 1” BSP n/a 120

FS5031 Automatic shut-off nozzle c/w swivel 1” BSP n/a 60

FS5032 4m Delivery Hose with crimped male ends 1” BSP n/a n/a

Pumps &

Accessories

55

Spill Containment &

Storage


Oil Storage Banks

Oil Storage Banks

Oil Dispensing BankIn addition to the standard Bulk Fuel Storage Tank benefits, this Oil Dispensing range features:

– Fitted with lifting eyes and forkliftable base for ease of handling and relocation of tank (empty only)

– Galvanised mesh floor above the drip collection sump, for easy and safe filling of smaller equipment

– Top mounted outlets to prevent seepage– Large, secure storage cabinet with full height access door– 3-way locking system with unique ‘anti levering’ design on

cabinet door for extra security– Door stay, holds door wide open to give greater access

and helps prevent door slamming– High quality lubricant pump options available

Low Level Waste Oil BankIn addition to the standard Bulk Fuel Storage Tanks features and benefits, this Waste Oil Bank range features:

– 110% bunded waste oil and hydro-carbon storage tank to comply with PPG2 Regulations

– Low level oil collection sump to provide a safer, more comfortable working height and help prevent backache

– Oil filters and other smaller equipment can be easily drained by placing on the mesh floor above the collection sump

– Waste oil is pumped from the sump into the inner tank

Pump options for transfer of waste oil from sump to tank– K2 semi rotary hand pump– Push-button transfer pump, with auto switch-off after

5 minute run time


FS6070 Oil Dispensing Bank 2250 x 1200 x 1620 2200L


FS6080 Waste Oil Bank 2250 x 1200 x 1620 2,200L



code description feed size

power flow rate

FS5040 Electric 240V viscomat oil pump c/w pressure switch, 4m hose & trigger nozzle

1/2" 240v 9L /min

FS5041 Electric 240V viscomat oil pump c/w pressure switch, 15m hose & trigger nozzle, auto rewind hose reel

1/2" 240v 9L /min

code description feed size

power flow rate

FS5045 K2 Semi Rotary Hand Pump for transfer of waste oil

1" Hand 20 – 40

FS5046 Push-button Electric Pump for transfer of waste oil

1" 240v 50

Pumps

Pumps

Clean oil… Waste oil…

FS5045

MANUAL WASTE PUMP OPTIONAUTOMATIC WASTE PUMP OPTION

FS5046

56

Spill Containment &

Storage


Plastic Fuel Storage Tank Solutions

Poly Bunded Fuel Storage Tanks

– Fully enclosed bunded tank complete with built-in 240V pump, 4m delivery hose and auto shut-off nozzle

– Complete with digital flowmeter and 10 micron filter– Robust and durable design – high quality polyethylene– Tanks with 3500L capacity and greater, a remote contents gauge and

low level fill point cabinet are fitted as standard. Smaller capacity tanks are equipped with a clock gauge, and an optional gauge is available

– Below are listed the most common capacity stations – larger capacities are available upon request

Poly Bunded Oil Storage Tanks

– Fully bunded tanks suitable for industrial and domestic use. – Manufactured from durable and UV-resistant polyethylene– Optional bottom or top outlet including filter– Features a Watchman pro-active fuel monitoring system

Poly Bunded Waste Oil Storage Tanks

– Fully bunded tanks which provide safe storage of waste oil on site– Tanks are manufactured from durable polyethylene– Integrally bunded with 110% overspill capacity, with no outlets through bund– Helps to meet requirements set out by the Environment Agency


FS6080 Poly Bunded Fuel Tank (Slimline) 2700 x 900 x 1700 1,350L

FS6081 Poly Bunded Fuel Tank (Vertical) 1570 dia x 1800 1,400L

FS6082 Poly Bunded Fuel Tank (Horizontal) 2820 x 1500 x 1650 2,500L






FS6090 Poly Bunded Oil Storage Tank (Slimline)

900 x 2700 x 1700 1,350L

FS6091 Poly Bunded Oil Storage Tank (Vertical)

1570 dia x 1800 1,400L

FS6092 Poly Bunded Oil Storage Tank (Horizontal)

1500 x 2800 x 1600 2,500L


2000 dia x 2500 3,500L


2550 dia x 2450 6,000L


FS6097 Poly Bunded Waste Oil Tank 900 x 2700 x 1700 1,350L

FS6098 Poly Bunded Waste Oil Tank 1576 dia x 1800 1,400L

FS6099 Poly Bunded Waste Oil Tank 1500 x 2800 x 1600 2,500L

ADBLUE

STORAGE

TANKS ALSO

AVAILABLE –

PLEASE

CONTACT US

– POA

Plastic Fuel Storage Tank Solutions

57

Spill Containment &

Storage


Comm

ercial Rainwater Storage

Commercial Rainwater Storage

Above Ground Commercial Rainwater StorageWe offer a high quality, market-leading range of retrofitable, large scale rainwater storage solutions

The range features capacities from 1,300 to 10,000 litres; sizes that will really make a difference to metered properties and areas prone to water restrictions in summer months. Our rainwater storage range of rotationally moulded storage tanks are tough, durable and built to last

How it works…Our range of rainwater storage tanks can easily be fitted to existing guttering of a building or incorporated in new builds

They collect rainwater from the roof via the downpipe. The rainwater flows through a filter to remove unwanted debris and then flows straight into the tank. The tank can be used in conjunction with an inline or submersible pump for the extraction of water. A full range of pumps is available

Commercial Rainwater Storage1. Rainwater inlet from roof2. Filter unit to remove dirt and debris from water before it flows

into tank (optional extra)3. Dirty water removed by filter washes back into the drain4. Calmed inlet at bottom of tank so incoming water does not

disturb any settled sediment5. Siphon overflow located at the tank fill level skims off excess

water and floating debris and returns to drain6. 2” bsp outlet for connecting to inline pump or for linking to

additional tank7. Tank fittings for a submersible or inline pump are standard

on all tanks, pumps are advised separately8. 16” lid for inspection and maintenance purposes

uses– WC and urinal flushing– Irrigation and landscape watering– Vehicle washing– Plate cooling– Plant washing– Washdowns

features and benefits– Capacities from 1,300 to 10,000L– GRP storage tanks available up to 20,000L– Immediate connection on site– Facility to link additional tanks as required– Tough and durable rotomoulded

construction– UV protected

WS6200capacityoutletdiameterheight





WS6208Rainwater filter suitable for roof sizes up to 800m2

WS6209Rainwater filter suitable for roof sizes up to 450m2

1,300L2” BSP Male1210mm1415mm





WS6208

WS6209

Below Ground Rainwater Storage TanksAnother very common water storage option is to locate the harvested rain below ground. We offer a comprehensive range of Polyethylene or GRP storage tanks, which provide an unobtrusive and secure solution for any size of building. Tank sizes from 1,800L up to 80,000L are available, providing an economical solution for the storage of large volumes of water

When you order a tank from our range of rainwater storage tanks the following will be included:– Calmed inlet – Overflow siphon – 16” lid – Water inlet

Commercial Rainwater Storage Tank Range

1

3

28

9

64

5

7

58

Spill Containment &

Storage


Poly Power Washers

Poly Power W

ashers

Poly Water Transport Tanks and Pressure WashersSaves you time as the tank removes the need to locate a water supply out on location – Fill your tank at base and take your water with you!

Poly Highway Tow Water Tank– Tamperproof, heavy duty lockable hatch protects contents– Access manhole and drain for easy cleaning and maintenance– Internal baffles, shaped ends and aerodynamic design for safe towing– Extended chassis – allows fitting of pumps, engines and other equipment– Durable and robust – galvanised chassis prevents rust and rubber strips prevent wear– Adjustable jockey wheel and option of either ball or eye coupling– Fitted with highway lighting, 7 pin plug and mudguards– Lighting and number plate housed in protective channel– Fitted with rubber suspension, auto reverse braking, hand parking brake and 13” wheels and tyres– Twin 28L chemical/anti-freeze tanks also available

Pressure Washers– To be fitted on extended chassis at the front of the Poly Highway Tow Water Tank– High performance pressure washers with 200 bar petrol or diesel engine options– Many uses including cleaning of plant machinery and equipment on site, street cleaning, graffiti removal etc– Diesel pressure washer comes with electric start– Both pressure washers have a flow rate of 15L/minute– Standard spec includes 8m hose, adjustable trigger lance and a transport holder for safe storage of lance


WS6230 Poly Trolley Pressure Washer 1350 x 760 x 1150 105L


WS6220 Poly Water Tank – No Pressure Washer 3500 x 1700 x 1340 1100L

WS6221 Poly Water Tank – No Pressure Washer 4200 x 1900 x 1340 2000L

WS6222 Poly Water Tank – Highway Tow c/w 200 bar (3000 psi) Yanmar Diesel Engine Pressure Washer, 8m hose, lance & electric start

3500 x 1700 x 1340 1100L

WS6223 Poly Water Tank – Highway Tow c/w 200 bar (3000 psi) Honda Petrol Engine Pressure Washer, 8m hose & lance

3500 x 1700 x 1340 1100L

WS6229 High pressure hose reel kit 30m (200 bar / 200psi) n/a

Poly Trolley Pressure Washer– Compact and lightweight, mobile pressure washer– Ideal for general site maintenance or washing down

of small equipment, machinery and walkways– Easy to move around site – ideal for getting to areas

where access is limited– Robust and durable design. Strong steel frame and

polyethylene water tank– c/w 100 bar (1500psi) Honda petrol pressure washer

with 8m hose, hose reel and lance

59

Spill Containment &

Storage


Fluid Transfer Managem

ent System

Fluid Transfer Management System

Fluid Transfer Management SystemAn innovative and practical solution to deliver clean oil from bulk storage to the point of use.

– Prevent damaging lubricant contamination – could save your company thousands of pounds!

– Eliminate costly and dangerous oil spills– Make lubrication tasks easier, safer and faster

Before After

Not just an oil can – but a Complete Fluid and Lubrication Management System

Can you afford any damage and downtime on your machinery and equipment as a result of contaminated oil?

How would it affect you if your machinery seized up as a result of dispensing the wrong type of oil?

Can you afford to waste or even spill your expensive oils and lubricants?

Did you realise dirt and dust in lubricants are a major cause of bearing failure?

Can you afford to risk this with your machines and equipment?

The World’s only fully integrated lubrication and dispensing system, that effectively:

– Colour codes storage of lubricant grades– Dispenses easily to awkward points– Prevents contamination of oils– Speeds up identification of oils and lubrication jobs – Reduces spills and slips resulting in accidents– Expedites filling and re-filling– Eliminates waste – saves money– Saves time and improves efficiency– Reduces machinery downtime– Leads to an organised workplace– Drastically improves housekeeping– Helps meet your environmental responsibility

Help to protect the Environment, your Workforce, your Machinery & Equipment

60

Spill Containment &

Storage


Fluid Transfer Management System

Fluid Transfer Managem

ent System

Easier, Faster, Safer, Cleaner – All products are made of industrial grade HDPE, ensuring durability and reliability– All drums have standard neck sizes so they are interchangeable with any of the lids – all lids fit every drum size– Robust design ensures easy handling– All three spout lids have quick-twist spouts, that are easy to open and close. This controls the flow and keeps any dirt out

code description

OS6101 1.5L Drum

OS6102 2L Drum

OS6103 3L Drum

OS6104 5L Drum

OS6105 10L Drum

OS6121 Storage Lid

OS6122 Utility Lid

OS6123 Stretch Lid

OS6124 Stumpy Lid

OS6125 Mini Spout Lid

OS6141 Pump Assembly Kit

OS6142 Stretch Hose Extension

OS6143 Stumpy Hose Extension

OS6155 ID Tag Labeling System

Storage LidWith this lid, drums can be pre-filled for storage or easier transport. This is a convenient alternative to handling bulky 20L drums

Stretch Hose ExtensionsFlexible spout hose attachments for awkward or hard to reach areas. Use as attachments to the Stretch or Stumpy Spout Lids

Four Lid ColoursRed, Blue, Green and Yellow (Other colours available upon request)

Please add the corresponding letters to code when ordering:

Stretch SpoutDesigned for use where precise pouring of lubricants is required including hard to reach areas. Ideal for lower viscosity oils

Utility LidMulti-purpose lid with large outlet hole ensures controlled fast pouring of lubricants. Use this lid with the Pump

ID Labelling Tag SystemHighly visual, simple and reliable identification system for all drums. Helps to ensure the right lubricant is used every time and improves productivity and efficiency

Mini SpoutWith an outlet diameter of approx 7mm, this mini spout is ideal for lubrication jobs where equipment filler holes are small

PumpThis down-stroke discharge pump delivers 1L for approx 14 strokes. Match with a Utility Lid and a drum. Supplied with an outlet hose and anti-drip nozzle

Stumpy SpoutThis wide spout model is especially designed for applications where higher lubricant flow is required

Five Drum Sizes Fully interchangeable with all lids; these drums have an extra wide neck opening for rapid pouring and easy cleaning

Blue

Red

Green

Yellow

B

R

G

Y

61

Spill Containment &

Storage


Drum

Taps & Vents

Drum Taps & Vents

¾” BSP Poly Drum Tap

features– Suitable for most oils, acids

and caustics– Made from durable

polyethylene

20/25L Drum Tap

features– Suitable for male threaded

25L drums– Self venting for splash

free floor– Made from durable

polyethylene– 61mm Thread

2” BSP Drum Vent

features– Brass valve opens at 0.35

bars– Facilitates pressure balance

when dispensing– Vent aperture can be closed

if required– With nitrile seal

2” BSP Poly Drum Tap

features– Suitable for most oils, acids

and caustics– Ensures high rates of flow– Made from durable

polyethylene

Drum Level Indicator

features– Visual drum level indicator

for horizontal drums– Includes ¾” Self-closing

Drum Tap

code description

FH8340 ¾” BSP Poly Drum Tap

code description

FH8341 20/25L Drum Tap

code description

FH8346 2" BSP Drum Vent

code description

FH8342 2" BSP Poly Drum Tap

code description

FH8350 Drum Level Indicator

¾” BSP Alloy Self Closing Drum Taps

features– Heavy duty tap with self

closing safety feature– Suitable for most oils and fuel– Complete with integral flame

arrestor and nylon seal – Stainless steel version

available with teflon seal

code description

FH8344 Alloy

FH8345 Stainless Steel

2” BSP Brass Tap

features– Heavy duty, self-closing tap

for use on high viscosity fluids, including heavy oils

– With teflon seal

code description

FH8343 2" BSP Brass Tap

Drum Opening Wrench

features– Bronze alloy drum opening

key – double ended wrench– Versatile with multipurpose

wrench heads– Suits virtually all drums– Non-sparking

code description

FH8321 Drum Opening Wrench

FOR EMPTY

DRUMS SEE

PAGE 64 FOR DRUMS

TOPPERS

SEE PAGE 9

62

Spill Containment &

Storage


Drum Pumps

Drum

Pumps

Rotary Pump for 210L Drum

features– A cast iron rotary pump for

oils and fuels (not petrol)– Complete with 2” BSP

adaptor

Nylon Piston Pumps

features– Suitable for lubricants, oils,

thinners, industrial solvents, chemical cleaners and detergents

– With nylon suction tube, steel nylon coated rod and viton seals

– Available for 25L and 210L drums

Lever Drum Pump for 210L Drum

features– High output lever action

pump for oil, diesel and anti-freeze.

– Very strong construction– With anti-drip filter cap

210L Drum Vacuum Pump

features– This pump will collect waste oil, liquid borne sludge,

metal chips and other debris– The pump will not lose its prime as the liquid level

drops, eliminating the need to manually bail out the bottom of the sump

– Precision-made from stainless steel– Fast powerful action – fast fill (210L in 90 seconds) –

Powered by compressed air– Automatic shut-off valve when barrel full– Supplied complete with barrel fittings, 2.5m hose and

suction nozzle (38mm dia)– Do not use with volatile fluids, petrol and kerosene etc

210L Drum not included (see page 64 for empty drums)

Heavy Duty Lever Oil Drum Pumps for 25/210L Drum

features– Very robust and durable

pump, suitable for heavier oils– With 1.5m flexi-hose, valve

and nozzle– Supplied with 2” adaptor– Available for 25L and

210L drums

Plunger Cans

features– Use to deliver measured amounts

of flammable liquid to wiping cloths or swabs

– Spring mounted dasher cup with perforated flash arrestor

– Helps reduce noxious vapours and prevent costly evaporation losses

– Made of galvanised steel– Shock resistant, polyethylene

versions also available

Manual Pump for 25L Drums

features– Designed to fit filler points

that are difficult to access– With 1.7m outlet hose and

anti-drip 13mm spout – 2” BSP male threads– Pumps on down stroke

code description

FH8360 Rotary Pump

code description

FH8365 25L Drum

FH8366 210L Drum

code description

FH8361 Lever Pump

code description

FH8370 210L Drum Vacuum Pump

code description capacity

FH8380 Steel Plunger Cans 2.5L

FH8381 Steel Plunger Cans 5L

FH8385 Poly Plunger Cans 0.92L



code description

FH8364 Manual Pump

code description

FH8362 25L Drum

FH8363 210L Drum

63

Spill Containment &

Storage


Electric Pumps, D

rums &

Accessories

Electric Pumps, Drums & Accessories

Plastic Funnel

features– Help prevent spillages and avoid slippery

floors when pouring fluids– Made of tough, durable HDPE– Complete with filter

Plastic Flexispout Funnel

features– Ideal for dispensing in areas that are difficult

to access easily– Made of tough, durable HDPE– Complete with removable filter

code size mm

FH8322 250 x 180

code size mm

FH8323 235

Electric Utility Pumps

features– Excellent quality, multi-use utility pumps with single phase motors– Quick and simple to maintain. Lightweight and compact to transport, with carry handle– Nitrile oil resistant impellers and bronze pump body with stainless steel shaft– With thermal overload trip and ‘run dry’ protection– Max viscosity 150 cp (Not suitable for gasoline, diesel, solvents, thinners or other flammables)– Available in either 230 or 400V 3 phase 50Hz (3 phase pump has no handle)

IBC AdBlue Pump Kits

features– Kit designed to be easy to transfer from one IBC to another– Self priming membrane pump with dynamic seal to minimise the need for maintenance– All kits come with 6m delivery hose, 1m suction hose and IBC Adaptor– Pro kit also comes with a digital flow meter and auto shut-off nozzle

UN Approved Steel and Plastic Open Top Drums

features– Ideal for multiple storage uses including flammables, oily waste and used absorbents– Features an easy-close fastening ring, for secure storage and easy access to contents– Plastic drums are constructed of heavy-duty, chemical resistant polyethylene– Reconditioned tighthead (Twin bung) steel drums also available

code power port size flow rate L/min vertical lift size mm weight

UP8400 230V (1 Phase) ¾” 20 2m 260x160x160 7kg

UP8401 230V (1 Phase) 1” 40 2m 288x199x212 10.5kg

UP8402 230V (1 Phase) 1½” 80 3m 325x242x225 17kg

UP8403 400V (3 Phase) 1½” 80 3m 325x242x225 17kg

code description power flow rate L/min

AP8400 Standard IBC AdBlue Pump Kit 240v 35

AP8401 Pro IBC AdBlue Pump Kit 240v 35


FH8310 Open Top Steel Drum – UN Approved 570 Dia. x 880 210L

FH8319 Tighthead Steel Drum – UN Approved 570 Dia. x 880 210L

FH8315 Open Top Plastic Drum – UN Approved 310 Dia. x 515 30L




1,000L

IBCS ALSO

AVAILABLE –

PLEASE

CONTACT US

64

Spill Containment &

Storage


Storage Boxes

Storage BoxesMachinery Document Storage Box

features:– Ideal for storing records and documents next to machinery– Can be used on commercial vehicles and forklifts– Made from durable and recyclable polyethylene– Resistant to most chemicals, detergents and oils– Large enough to hold an A4 ring binder

Multi-Purpose Poly Storage Boxes

features:– Heavy duty storage boxes that can be used to store

tools, equipment, PPE and absorbents etc– Fit under workbenches or on lorries and trailers– Made from durable and robust polyethylene– Single handle 3-point locking mechanism

Wall Safety Storage Boxes

features:– Ideal for storage of spill absorbents, fire extinguishers

and emergency breathing apparatus etc– Can either be fixed to the wall or situated on the floor– With rubber seal and polycarbonate windows– Plastic toggles and locking lynch pins– Made from durable and recyclable polyethylene– Green versions available for first aid kits and eye wash stations

Vehicle Storage Box

features:– Excellent storage solution for commercial vehicles – Large capacity – 60L– Use to hold spill absorbents or tools and equipment– Essential for ADR required vehicles– Made from durable and recyclable polyethylene


PSB4010 Machinery Document Storage Box 280 x 85 x 330


PSB4030 Vehicle Storage Box 300 x 430 x 660


PSB4015 Multi-Purpose Poly Storage Box 520 x 360 x 360



PSB4018 Multi-Purpose Poly Storage Box 800 x 480 x480



PSB4020 Wall Safety Storage Box 320 x 255 x 700



FOR ADR

SPILL KITS

SEE PAGE 24

65

Spill Containment &

Storage


Storage Bins & Tool Boxes

Storage Bins & Tool Boxes

Tool Transport and Storage Box

features:– Use to transport and store tools and equipment– Stackable with locking pins, to optimise use of space– With forklift pockets and integrated handles – With lid toggle closures to keep lid secure and integral seal to

keep contents dry– Made of dark grey, durable polyethylene – Trolley version with wheels and handle, also available– Optional side door to allow easy access for long items

(Dim: 500x450mm)– Can also be used as a storage and transport box for

fluorescent light tubes (up to 1550mm long)

Storage Bin with Hinged Lids

features:– Ideal for indoor or outdoor storage of spill absorbents and

granules, salt, sand and grit– Stackable for easy storage and with forklift access pockets for

easy transportation– Easy access with angled lid to allow water build-up to run off– Durable and robust polyethylene– 400L storage box is fitted with plastic toggles and lynch pins

as standard


TB4000 Tool Transport & Storage Box 600 x 800 x 530 150L

TB4001 Tool Transport & Storage Box with wheels and folding handle

600 x 800 x 530 150L



TB4004 Tool Transport & Storage Box with side door

840 x 1700 x 800 750L


GB8104 Storage Bin c/w Hinged lid 850 x 500 x 750 130L



GB8105

GB8106

FOR WHITE

ROCK SALT

SEE PAGE 28

66

Spill Containment &

Storage


Pallet Storage Boxes

code description internal base size mm

volumecapacity

weight max loadingcapacity

stackingweight

SC4055 Collapsible Pallet Box 920 x 1120 x 767 790L 51kg 500kg 2750kg

code description internal base size mm

volumecapacity

weight max loadingcapacity

stackingweight

SC4040 Standard Duty Pallet Box 950 x 1145 x 620 700L 38.5kg 500kg 3000kg

SC4041 Standard Duty Box Lid n/a n/a 5kg n/a n/a

SC4042 Heavy Duty Pallet Box 920 x 1120 x 600 600L 40.5kg 500kg 3000kg

SC4043 Heavy Duty Pallet Box c/w 4 Castors, 1 Brake

920 x 1120 x 600 600L 36kg 500kg n/a

SC4044 Heavy Duty Box Lid n/a n/a 6kg n/a n/a

SC4045 Super Heavy Duty Pallet Box 920 x 1120 x 600 600L 48kg 600kg 4000kg

SC4046 Super Heavy Duty Box Lid n/a n/a 6kg n/a n/a

Collapsible Pallet Box

features: – Save up to 70% when transporting these empty boxes, as all side walls can be folded over– Each side can be collapsed completely using an easy-to-operate mechanism– With flap openings on two sides – facilitates easier loading and unloading– Very strong and durable polyethylene with 2 base runners

High Quality Pallet Boxes

features: – Help to make your logistical processes work more smoothly, safely and efficiently– Ideal for bulk handling and storage of goods, especially in the warehouse distribution

and food manufacturing industries– The solid sides and base with smooth profiles provide an excellent environment for loose,

un-packaged products– Stackable – lowest container in a stack can bear a load of up to 4 tonnes– Very strong and durable polyethylene with 3 base runners– Simple to clean and easy to maintain– Suitable for use as a battery storage box– Optional loading castor wheels are available

PALLET STORAGE BOXES

67

Spill Containment &

Storage

Storage Containers

Stacking Storage Containers

features:– Unique frame design gives these containers super strength– Hinged lids available for all sizes (apart from largest sized

containers – 600x800mm)

Optional Extras – POA– Hinged Lids – Snap lock clips – Hinge Protectors

Stack and Nest Containers

features:– High performance containers designed for use within

automation and conveyor systems– Nest inside each other for cost and space saving in storage

and transit– Containers with fold-out attached lids also available

code external dimensions

internal capacity

weight

SC4060 200 x 300 x 120 5L 0.4kg

SC4061 300 x 400 x 120 10L 0.9kg

SC4062 300 x 400 x 170 15L 1.0kg

SC4063 300 x 400 x 220 20L 1.4kg

SC4064 300 x 400 x 325 30L 1.7kg

SC4065 400 x 600 x 75 14L 1.2kg

SC4066 400 x 600 x 120 20L 1.5kg

SC4067 400 x 600 x 170 30L 2.0kg

SC4068 400 x 600 x 220 40L 2.2kg

SC4069 400 x 600 x 325 60L 2.7kg

SC4070 400 x 600 x 425 90L 3.4kg

SC4071 600 x 800 x 220 90L 4.2kg

SC4072 600 x 800 x 325 134L 5.3kg

SC4073 600x 800 x 425 175L 7.2kg


capacity weight

SC4098 386 x 582 x 135 Up to 150kg 3.2kg

SC4099 600 x 800 x 200 Up to 500kg 7.8kg

code external dimensions internal capacity weight

SC4090 400 x 600 x 300 50L 2.4kg

SC4091 400 x 600 x 265 50L 2.8kg

SC4092 400 x 600 x 310 56L 3.1kg

SC4093 400 x 600 x 370 67L 3.5kg

Wheeled Container Dolly

features:– Small dolly for 400x600mm containers – c/w 4 steering

castors (1 with brake)– Large dolly for 600x800 containers – c/w 2 steering and 2

fixed castors


internal capacity

weight

SC4080 300 x 400 x 235 20L 1.5kg

SC4081 400 x 600 x 325 45L 2.4kg

Stacking Storage Containers – Automotive

features:– Designed especially for use in the automotive industry; also

unlimited uses in many other industries– Hinged lids available for both sizes

Optional Extras – POA– Hinged Lids – Snap lock clips – Hinge Protectors

Storage Containers

SC4073

SC4068SC4065

SC4064

SC4071

SC4090

SC4092

SC4091

SC4093

68

Download - Unisan Catalogue Spill Containment and Storage

Top Related