Download - SmartPlant Materials DBA Settings - Hyundai Engineeringspmat.hec.co.kr/marian_webentry/PDFs/SPMAT DBA Settings.pdf · NLS_SETTING_ON_DB ... PDMS_DOWNLOAD_DEST ... SmartPlant Materials

SmartPlant Materials DBA Settings

Version 2011 SP1 (7.0.1)

September 2010

DMAR1-PE-200144A

Copyright Copyright © 2010 Intergraph Corporation. All Rights Reserved. Including software, file formats, and audiovisual displays; may be used pursuant to applicable software license agreement; contains confidential and proprietary information of Intergraph and/or third parties which is protected by copyright law, trade secret law, and international treaty, and may not be provided or otherwise made available without proper authorization from Intergraph Corporation.

U.S. Government Restricted Rights Legend Use, duplication, or disclosure by the government is subject to restrictions as set forth below. For civilian agencies: This was developed at private expense and is "restricted computer software" submitted with restricted rights in accordance with subparagraphs (a) through (d) of the Commercial Computer Software - Restricted Rights clause at 52.227-19 of the Federal Acquisition Regulations ("FAR") and its successors, and is unpublished and all rights are reserved under the copyright laws of the United States. For units of the Department of Defense ("DoD"): This is "commercial computer software" as defined at DFARS 252.227-7014 and the rights of the Government are as specified at DFARS 227.7202-3. Unpublished - rights reserved under the copyright laws of the United States. Intergraph Corporation P.O. Box 240000 Huntsville, AL 35813 Street address: 170 Graphics Drive, Madison, AL 35758

Terms of Use Use of this software product is subject to the End User License Agreement ("EULA") delivered with this software product unless the licensee has a valid signed license for this software product with Intergraph Corporation. If the licensee has a valid signed license for this software product with Intergraph Corporation, the valid signed license shall take precedence and govern the use of this software product. Subject to the terms contained within the applicable license agreement, Intergraph Corporation gives licensee permission to print a reasonable number of copies of the documentation as defined in the applicable license agreement and delivered with the software product for licensee's internal, non-commercial use. The documentation may not be printed for resale or redistribution.

Warranties and Liabilities All warranties given by Intergraph Corporation about equipment or software are set forth in the EULA provided with the software or applicable license for the software product signed by Intergraph Corporation, and nothing stated in, or implied by, this document or its contents shall be considered or deemed a modification or amendment of such warranties. Intergraph believes the information in this publication is accurate as of its publication date. The information and the software discussed in this document are subject to change without notice and are subject to applicable technical product descriptions. Intergraph Corporation is not responsible for any error that may appear in this document. The software discussed in this document is furnished under a license and may be used or copied only in accordance with the terms of this license. No responsibility is assumed by Intergraph for the use or reliability of software on equipment that is not supplied by Intergraph or its affiliated companies. THE USER OF THE SOFTWARE IS EXPECTED TO MAKE THE FINAL EVALUATION AS TO THE USEFULNESS OF THE SOFTWARE IN HIS OWN ENVIRONMENT. Intergraph is not responsible for the accuracy of delivered data including, but not limited to, catalog, reference and symbol data. Users should verify for themselves that the data is accurate and suitable for their project work.

Trademarks Intergraph, the Intergraph logo, PDS, SmartPlant, SmartMarine, FrameWorks, I-Convert, I-Export, I-Sketch, IntelliShip, INtools, ISOGEN, MARIAN, SmartSketch, SPOOLGEN, SupportManager, and SupportModeler are trademarks or registered trademarks of Intergraph Corporation or its subsidiaries in the United States and other countries. Microsoft and Windows are registered trademarks of Microsoft Corporation. MicroStation is a registered trademark of Bentley Systems, Inc. Other brands and product names are trademarks of their respective owners.

SmartPlant Materials DBA Settings 3

Contents Preface .......................................................................................................................................................... 9

Overview ..................................................................................................................................................... 11

Workflow to Set Up DBA Settings ........................................................................................................... 13

General Database Settings ................................................................................................................... 13 Application Server Specific Settings ..................................................................................................... 15 Active Application Server Settings ........................................................................................................ 16 A.60.63 Valid Settings ........................................................................................................................... 16

General DBA Settings ............................................................................................................................... 19

ACC_IMPORT_PATH ........................................................................................................................... 19 ACT_IMPORT_PATH ........................................................................................................................... 19 AUDIT_ENABLE ................................................................................................................................... 19 AUDIT_KEEP_TRAIL_DAYS ................................................................................................................ 19 BID_IMPORT_PATH ............................................................................................................................ 20 BOM_IMPORT_GET_FILE ................................................................................................................... 20 BOM_IMPORT_PATH .......................................................................................................................... 20 C30_JOB_STATUS .............................................................................................................................. 20 C30_OPTIMIZER_MODE ..................................................................................................................... 20 C30_SORT_AREA_SIZE ...................................................................................................................... 21 CIPS_DELTA_PATH ............................................................................................................................ 21 COMP_LOGIN_HELP ........................................................................................................................... 21 COMP_REG_QLF ................................................................................................................................ 21 DEBUG_USED_COMMENTS .............................................................................................................. 22 DISCOVERER_APP_SERVER ............................................................................................................ 22 DISCOVERER_LOGON_TIME_LIMIT ................................................................................................. 22 DISP_LABEL_TXT ................................................................................................................................ 23 DOC_IMPORT_PATH .......................................................................................................................... 23 EMAIL_ACCOUNT ............................................................................................................................... 23 FAB_IMPORT_PATH ........................................................................................................................... 23 FLUID_IMPORT_PATH ........................................................................................................................ 23 GEOM_PROMPT_SEP ........................................................................................................................ 24 IDENT_CREATION ............................................................................................................................... 24 IDLE_TIME ............................................................................................................................................ 24 JCS_HIDE_SUB_JOBS ........................................................................................................................ 24 JCS_USER_STATUS ........................................................................................................................... 25 KEEP_REPORT_HISTORY ................................................................................................................. 25 LOGIN_REQUEST_APT ...................................................................................................................... 25 LOG_EMAIL_HANDLING ..................................................................................................................... 25 LOG_EWQ_HANDLING ....................................................................................................................... 26 LOG_FILE_DEST ................................................................................................................................. 26 LOG_ONLINE_JOBS ............................................................................................................................ 26 LOG_SESSION..................................................................................................................................... 26 MTO_OPTIMIZER_MODE .................................................................................................................... 27 MTO_SORT_AREA_SIZE .................................................................................................................... 27 NEW_USER_BUTTON ......................................................................................................................... 27

Contents

4 SmartPlant Materials DBA Settings

NLS_SETTING_ON_DB ....................................................................................................................... 27 OII_IMPORT_PATH .............................................................................................................................. 28 OMI_INDEX_METHOD ......................................................................................................................... 28 OMI_OPTIMIZER_MODE ..................................................................................................................... 28 OMI_SORT_AREA_SIZE ..................................................................................................................... 28 OPI_IMPORT_PATH ............................................................................................................................ 29 ORA_SQL_TRACE ............................................................................................................................... 29 ORA_TIMED_STATISTICS .................................................................................................................. 29 ORI_IMPORT_PATH ............................................................................................................................ 29 OSCI_IMPORT_PATH .......................................................................................................................... 29 OSD_PATH ........................................................................................................................................... 29 PDB_REPORT_DEST_DB ................................................................................................................... 30 PLL_EXPORT_PATH ........................................................................................................................... 30 PLL_IMPORT_PATH ............................................................................................................................ 30 PLUS_EXECUTABLE ........................................................................................................................... 30 POP3_CLEANUP ................................................................................................................................. 30 POP3_HOST ......................................................................................................................................... 31 POP3_PASS ......................................................................................................................................... 31 POP3_PORT ......................................................................................................................................... 31 POP3_REMOVE_UKN_MAILS ............................................................................................................ 31 POP3_USER ......................................................................................................................................... 32 PRICE_IMPORT_PATH ....................................................................................................................... 32 RBS_ACC ............................................................................................................................................. 32 RBS_DELBOM ...................................................................................................................................... 32 RBS_DOC ............................................................................................................................................. 32 RBS_DWN ............................................................................................................................................ 33 RBS_EST .............................................................................................................................................. 33 RBS_FAB .............................................................................................................................................. 33 RBS_FAH .............................................................................................................................................. 33 RBS_FLUID .......................................................................................................................................... 33 RBS_MTO ............................................................................................................................................. 34 RBS_OII ................................................................................................................................................ 34 RBS_OMI .............................................................................................................................................. 34 RBS_OPI ............................................................................................................................................... 34 RBS_ORI .............................................................................................................................................. 34 RBS_OSCI ............................................................................................................................................ 35 RBS_PDMS .......................................................................................................................................... 35 RBS_PDS ............................................................................................................................................. 35 RBS_PLL .............................................................................................................................................. 35 RBS_PROP ........................................................................................................................................... 35 RBS_RPLC ........................................................................................................................................... 36 RBS_SRCH ........................................................................................................................................... 36 RBS_TRAFFIC ...................................................................................................................................... 36 RBS_VER ............................................................................................................................................. 36 REPORT_CHECK_INTERVAL ............................................................................................................. 36 SAP_OPTIMIZER_MODE .................................................................................................................... 37 SINGLE_SIGN_ON ............................................................................................................................... 37 SITE_EXPORT_PATH .......................................................................................................................... 37 SMARTPLANT_WEBCLIENT_FILTER ................................................................................................ 37 SMTP_CLIENT ..................................................................................................................................... 37 SMTP_HOST ........................................................................................................................................ 38 SMTP_PASS ......................................................................................................................................... 38 SMTP_PORT ........................................................................................................................................ 38 SMTP_USER ........................................................................................................................................ 38

Contents


SQLLDR_EXECUTABLE ...................................................................................................................... 39 SQLLDR_MIN_SYNC_TIME ................................................................................................................ 39 STACKABLE_ROLES ........................................................................................................................... 39 SUPER_USER ...................................................................................................................................... 39 SUPER_USER_ROLE .......................................................................................................................... 40 THEME_COLOR ................................................................................................................................... 40 TRAFFIC_EXPORT_PATH .................................................................................................................. 40 TRAFFIC_IMPORT_PATH ................................................................................................................... 40 UPD_RULE_BASED_IDENTCODES ................................................................................................... 40 USED_COMMENT_VISIBILITY ............................................................................................................ 41 USER_COMPLEX_PW ......................................................................................................................... 41 USER_PW_CASE_SENSITIVE ............................................................................................................ 41 USER_PW_CHANGE_DAYS ............................................................................................................... 41 USER_PW_HISTORY .......................................................................................................................... 42 USE_LABEL_TEXT .............................................................................................................................. 42 USE_MULTILINE_GEOM_PROMPT ................................................................................................... 42 WEBUTIL_DIR_AS ............................................................................................................................... 42 WEBUTIL_DIR_TS ............................................................................................................................... 42

Application Server-Specific Settings ...................................................................................................... 43

ACC_UPLOAD_DEST .......................................................................................................................... 43 ACC_UPLOAD_URL ............................................................................................................................ 43 ACT_UPLOAD_DEST .......................................................................................................................... 43 ACT_UPLOAD_URL ............................................................................................................................. 44 BID_EXPORT_DEST ............................................................................................................................ 44 BID_EXPORT_URL .............................................................................................................................. 44 BOM_DOWNLOAD_DEST ................................................................................................................... 45 BOM_DOWNLOAD_URL ..................................................................................................................... 45 BOM_EXCEL_MPV_EXPORT_TEMPLATE ........................................................................................ 45 BOM_EXCEL_SPV_EXPORT_TEMPLATE ......................................................................................... 45 BOM_EXCEL_TEMPLATE_DIR ........................................................................................................... 46 BOM_UPLOAD_DEST ......................................................................................................................... 46 BOM_UPLOAD_URL ............................................................................................................................ 46 CMS_FILE_UPLOAD_DEST ................................................................................................................ 47 DEFAULT_TNS_NAMES_ENTRY ....................................................................................................... 47 DOC_TIMEOUT .................................................................................................................................... 47 DOC_UPLOAD_CMD_ARGV_TRACE ................................................................................................ 47 DOC_UPLOAD_DEST .......................................................................................................................... 48 DOC_UPLOAD_URL ............................................................................................................................ 48 EULUSER_PUBLIC_CONNECTION .................................................................................................... 48 EXCEL_COL_CHAR ............................................................................................................................. 49 EXCEL_DATE_FORMAT ..................................................................................................................... 49 EXCEL_FUNCTION_IF ........................................................................................................................ 49 EXCEL_FUNCTION_SEP .................................................................................................................... 49 EXCEL_FUNCTION_SUM .................................................................................................................... 49 EXCEL_MAX_LINES ............................................................................................................................ 49 EXCEL_ROW_CHAR ........................................................................................................................... 50 FAB_UPLOAD_DEST ........................................................................................................................... 50 FAB_UPLOAD_URL ............................................................................................................................. 50 FLC_CUSTOM_SCREEN ..................................................................................................................... 50 FLUID_UPLOAD_DEST ....................................................................................................................... 51 FLUID_UPLOAD_URL .......................................................................................................................... 51 GRAPHIC_DOWNLOAD_DEST ........................................................................................................... 51

Contents


GRAPHIC_DOWNLOAD_URL ............................................................................................................. 52 GRAPHIC_UPLOAD_DEST ................................................................................................................. 52 HELP_DOC_DEST ............................................................................................................................... 52 HELP_DOC_URL.................................................................................................................................. 53 HOME_PAGE_URL .............................................................................................................................. 53 IMPORT_FROM_FILE_DEST .............................................................................................................. 53 MS_DOWNLOAD_DEST ...................................................................................................................... 53 MS_DOWNLOAD_URL ........................................................................................................................ 54 MTR_DOWNLOAD_URL ...................................................................................................................... 54 MTR_UPLOAD_DEST .......................................................................................................................... 54 M_EUL_PUBLIC_CONNECTION ......................................................................................................... 55 OII_DOWNLOAD_DEST ...................................................................................................................... 55 OII_DOWNLOAD_URL ......................................................................................................................... 55 OII_EXPORT_PATH ............................................................................................................................. 56 OII_UPLOAD_DEST ............................................................................................................................. 56 ONLINE_REFERENCE_LIBRARY_URL .............................................................................................. 56 OPI_UPLOAD_DEST ........................................................................................................................... 56 OPI_UPLOAD_URL .............................................................................................................................. 57 ORI_UPLOAD_DEST ........................................................................................................................... 57 ORI_UPLOAD_URL .............................................................................................................................. 57 OSCI_UPLOAD_DEST ......................................................................................................................... 58 OSCI_UPLOAD_URL ........................................................................................................................... 58 PDB_REPORT_DEST .......................................................................................................................... 58 PDB_REPORT_URL ............................................................................................................................ 59 PDMS_DOWNLOAD_DEST ................................................................................................................. 59 PDMS_DOWNLOAD_URL ................................................................................................................... 59 PDS_DOWNLOAD_DEST .................................................................................................................... 60 PDS_DOWNLOAD_URL ...................................................................................................................... 60 PLL_DOWNLOAD_DEST ..................................................................................................................... 60 PLL_DOWNLOAD_URL ....................................................................................................................... 61 PLL_UPLOAD_DEST ........................................................................................................................... 61 PLL_UPLOAD_URL .............................................................................................................................. 61 PRICE_LIST_DOWNLOAD_URL ......................................................................................................... 62 PRICE_LIST_EXPORT_DEST ............................................................................................................. 62 PRICE_LIST_IMPORT_DEST .............................................................................................................. 62 PRICE_UPLOAD_DEST ....................................................................................................................... 62 PRICE_UPLOAD_URL ......................................................................................................................... 63 PRINT_TO_FILE_DEST ....................................................................................................................... 63 PRINT_TO_FILE_SEP ......................................................................................................................... 63 PRINT_TO_FILE_URL ......................................................................................................................... 63 PROG_URL .......................................................................................................................................... 64 QS_DOC_DOWNLOAD_URL .............................................................................................................. 64 QS_DOC_SERVLET ............................................................................................................................ 64 REL_MAN_FILE_DEST ........................................................................................................................ 65 REL_MAN_MODULE_PATH ................................................................................................................ 65 REL_MAN_REPORT_PATH ................................................................................................................ 65 REPORT_DOCU_URL ......................................................................................................................... 65 REPORT_SERVER .............................................................................................................................. 65 SERVLET_PATH .................................................................................................................................. 66 SITE_EXPORT_DEST .......................................................................................................................... 66 SITE_EXPORT_URL ............................................................................................................................ 66 SMARTPLANT_WEBCLIENT_URL...................................................................................................... 67 SPF_REPORT_DEST .......................................................................................................................... 67 SPF_REPORT_PATH_UNC ................................................................................................................. 67

Contents


WEBHELP_SERVER ............................................................................................................................ 67 WEB_APPROVAL_URL ....................................................................................................................... 67 XLS_FORMAT ...................................................................................................................................... 68

Contents



This document describes the general and application server-specific DBA settings in SmartPlant Materials.

Preface

Preface



This document describes all relevant DBA settings, their usage, and valid values. The DBA settings are global settings and preferences that control the general behavior and processing of SmartPlant Materials, independent of the login project or product group. Only a system administrator who is familiar with the database and Oracle SQL should make changes. Changes can be made while logged into any product group or project, provided the user role grants write access.

Overview

Overview



The purpose of this document is to explain the specific tasks for setting up DBA settings in SmartPlant Materials. This section describes the steps required for setup of general and application-server specific settings. DBA settings are maintained on the A.60.04 DBA Settings screen. This screen is used to maintain global settings and preferences, which control the behavior and processing of other modules. Most of these settings relate to options that should be configured by an experienced DBA, as they may affect the use of server resources or general application performance. Other settings determine what options the user may choose from in other modules. The screen has three tab pages: General Database Settings Application Server Specific Settings Active Application Server Settings

General Database Settings The General Database Settings tab lists all the settings that control database resources and behavior. All general DBA settings are listed in the General DBA Settings (on page 19) section.

In the first (DBA Settings) block, the DBA settings are displayed with name, language-dependent short description and description. The Add indicator controls whether values can be added for this DBA setting or not. The Delete indicator controls whether values of this DBA setting can be

Workflow to Set Up DBA Settings



deleted or not. The Edit indicator controls whether values of this DBA setting can be changed or if these values are fixed. The Data Type indicates whether the setting value must be a character, number, date, or special value. The general DBA settings are categorized into the following groups: Administration settings SmartPlant Reference Data-related settings JCS-related settings Discoverer-related settings SAP-related settings Rollback control related settings

There are several job types which, depending on the volume of data they are processing, may require a special rollback segment dedicated to them which is large enough to hold their undo information. By configuring these settings, the DBA can assign individual segments on a per job type basis. These types and corresponding setting names are RBS_...

Report-related settings Log file-related settings Interface directory settings

These directories can either be configured here on A.60.04, which means that the definitions are global and independent of projects, or you can configure them on a more detailed basis, that is, on the project group, on the project, or on the project/discipline level on A.20.11/12/13, respectively. Definitions on one of these screens, however, take precedence over definitions on this screen when a particular directory parameter has been set up in both places. For further details, refer to the SmartPlant Materials Project Defaults document, available from the Printable Guides page in the software, or the online help on the A.20.11/12/13 screens.

All directories must be configured in the database instance initialization file so that they are available as UTL_FILE_DIR directories.

You should include an appropriate configuration line for each single directory. You should never use the 'UTL_FILE_DIR=*' configuration option, as this option severely affects the overall database security.

Web-related settings In the second (DBA Setting Values) block, you can set and maintain values for the selected DBA setting. The value is entered in the Setting Value field. The Comment field can be used to enter explanatory comments for the setting value. You can define multiple predefined values for each setting, but only one of them can be set active by selecting the Active check box.



Application Server Specific Settings The Application Server Specific Settings tab lists all the settings that control application server specific resources and behavior. All application server specific settings are listed in the Application Server Specific Settings (see "Application Server-Specific Settings" on page 43) section.

In the first (DBA Settings) block, the DBA settings are displayed with name, language-dependent short description and description. The Add indicator controls whether values can be added for this DBA setting or not. The Delete indicator controls whether values of this DBA setting can be deleted or not. The Edit indicator controls whether values of this DBA setting can be changed or if these values are fixed. The Data Type indicates whether the setting value must be a character, number, date, or special value. The application server specific settings are categorized into the following groups: Administration settings Discoverer related settings Report related settings Web related settings

In the second (DBA Setting Values) block, you can set and maintain values for the selected DBA setting. The value is entered in the Setting Value field. The Comment field can be used to enter explanatory comments for the setting value. You can define multiple predefined values for each setting, but only one of them can be set active by selecting the Active check box. If you are working with only one application server or if the value is valid for all application servers, you can leave the Server Name field empty. In case of multiple application servers used for your SmartPlant Materials application, enter the application server by selecting a value from the LOV in the Server Name field. The list of values is only available if you have defined the application server names on the third (Application Server Specific Settings) tab.



Active Application Server Settings The Active Application Server Settings tab lists all the available application servers in the first (Application Servers) block with their server name, IP address, and description. The DBA settings assigned to the selected application server are displayed in the second (DBA Settings and Values) block with the setting values.

A.60.63 Valid Settings

You can open the A.60.63 Valid Settings screen using the icon on each screen in SmartPlant Materials and SmartPlant Reference Data. The second tab on A.60.63 shows the DBA settings that are relevant for the screen from which it was called. If you have permissions to enter or change DBA settings on A.60.04, you can update these values here on A.60.63 as well.



When this screen is called, it shows the current DBA settings. Double-clicking the value or using the LOV icon or F9 opens the List of Values, wherever available. When a value is changed and the A.60.63 screen is closed, you are prompted to specify if the changes should be made. To be sure that the changes are in effect, the screen from which A.60.63 was called must be closed and re-opened.


ACC_IMPORT_PATH DB Server path for Account Code Import jobs. SmartPlant Materials module(s) affected by this setting: J1004 Valid values:

ACT_IMPORT_PATH DB Server path for Activity Import jobs. SmartPlant Materials module(s) affected by this setting: J3002 Valid values:

AUDIT_ENABLE Activate/Deactivate audit feature. When audit is activated, various events are captured and stored in the audit trail table. Captured information can be viewed on the A.60.86 Audit Trail screen. Currently, only user and user security changes are tracked. You can find details about performed steps in the produced trace file. Trace files related to the audit management start with the prefix AUDIT_. SmartPlant Materials module(s) affected by this setting: A2005, A200601, A200602,

A200604, A200621, A600101, A600102, A600103, A6063 Valid values: Y, N

AUDIT_KEEP_TRAIL_DAYS Number of days to keep audit records. Specify how many days the audit trails will be available. Default value 0 means forever. This parameter is used by DBMS job AUDIT_PURG to delete audit records. SmartPlant Materials module(s) affected by this setting: A6045 Valid values: Any integer value >= 0

General DBA Settings



BID_IMPORT_PATH DB Server path for Bid Loads. SmartPlant Materials module(s) affected by this setting: P3024 Valid values:

BOM_IMPORT_GET_FILE Transfer the import file automatically to DB server? If you want to perform jobs in batch mode, you can set this parameter to Y. This setting tells the system that it must download the OMI import file from the application server's BOM_UPLOAD_URL to the DB server. SmartPlant Materials module(s) affected by this setting: B4001 Valid values: Y

BOM_IMPORT_PATH DB server path for BOM Import. If OMI Import is running in JCS batch, this setting specifies the directory in the file system of the Oracle Server where import files are being stored. This setting will be displayed as the default physical path on screen B.40.01. SmartPlant Materials module(s) affected by this setting: B4001 Valid values:

C30_JOB_STATUS Use the job status functionality from A.60.85 in the Forecast/Reservation Run. When this DBA setting is set to 'N', no job status is created (A.60.85). This might be switched off for performance reasons. SmartPlant Materials module(s) affected by this setting: C3001, C3011 Valid values: N

C30_OPTIMIZER_MODE Optimizer mode that C3001/11 should use. Specify either CHOOSE, RULE, FIRST_ROWS, or ALL_ROWS here. Once the forecast/reservation job is finished, this session parameter is reset to the value that was in effect before the job started. SmartPlant Materials module(s) affected by this setting: C3001, C3011 Valid values: CHOOSE, RULE, FIRST_ROWS, ALL_ROWS



C30_SORT_AREA_SIZE Sort area size that C3001/11 should use. Specify a value between 64K (this is the default) and 256M here. Once the forecast/reservation job is finished, this session parameter is reset to the value that was in effect before the job started. SmartPlant Materials module(s) affected by this setting: C3001, C3011 Valid values: Any value in the range of 64K to 256M

CIPS_DELTA_PATH DB Server path for Create Delta File in A.60.37. Path in the database server where the delta file created by screen A.60.37 Customer CIPs/Forms/Reports is going to be saved. SmartPlant Materials module(s) affected by this setting: A6037 Valid values:

COMP_LOGIN_HELP Help for supplier login. URL for customer specific help about the supplier login. SmartPlant Materials module(s) affected by this setting: ./. Valid values:

COMP_REG_QLF Display setting for P.20.03 if called via eSupplier Login. In P.20.03 Questionnaire, this setting affects the visibility of top-level nodes in the questionnaire tree if the screen has been called from the eSupplier Login (it is meaningless if the screen is called from the menu). Value '1-Step' will not restrict the number of top-level nodes displayed in the tree at all; that is, the company that has opened the screen via eSupplier Login is able to answer questions below all three top-level nodes from the very beginning. Values '2-Step' and '3-Step' will cause P.20.03 to show the top-level nodes 'Login Details' and 'Company Profile' only. After a company has submitted its answers to all the (mandatory) questions below those top-level nodes, and after these answers (also known as company profile) have been approved, a new call of P.20.03 by the company (via eSupplier Login) will yield the complete questionnaire tree. The difference between the values '2-Step' and '3-Step' will become evident on P.20.02 Login Requests only; that is, when set to '3-Step', the submitted login request must be approved via approval sequence before answers for the company profile and/or qualifications can be entered on P.20.03 Questionnaire via Supplier Entry. SmartPlant Materials module(s) affected by this setting: A2049, P2002, P2003 Valid values: 1-Step, 2-Step, 3-Step



DEBUG_USED_COMMENTS Debug used comments. This DBA setting is not to be used by customers. It is only meant for debugging comment-related problems. SmartPlant Materials module(s) affected by this setting: ./. Valid values:

DISCOVERER_APP_SERVER Discoverer Application Server. You must specify a valid value, for example, myservername.mydomain.com. Ask your web server administrator before setting this value. The value will be used to generate the URL to call Discoverer from the web. You can easily validate with your web browser. Try to reach Discoverer on your application server using the following URL: >> http://myservername.mydomain.com/discoverer/viewer << SmartPlant Materials module(s) affected by this setting: DIS1001 Valid values:

DISCOVERER_LOGON_TIME_LIMIT Time limit for Discoverer to get valid login information. This value is the amount of seconds the system waits for the discoverer session to be established . If you specify a value of 30, the timer will start after pressing the button and reserve session information for your discoverer session. This session information allows you to query data of the same project or projects that your current account allows you to. While you are trying to log on, other users will be blocked from starting Discoverer. This is until your Discoverer session is successfully started or your time limit of 30 seconds is over. Fast application servers and network connections allow a low value for this DBA setting. You will have to try different values until you find a value that fits your environment. SmartPlant Materials module(s) affected by this setting: DIS1001 Valid values:



DISP_LABEL_TXT Use label text of A.50.01 for dynamic attributes instead of attribute code. If this setting is active, the label texts of screen A.50.01 Attributes are used in SmartPlant Reference Data for dynamic attributes instead of the attribute code. SmartPlant Materials module(s) affected by this setting: SmartPlant Reference Data Valid values: N, Y

DOC_IMPORT_PATH DB Server path for Document Import jobs. SmartPlant Materials module(s) affected by this setting: D1001 Valid values:

EMAIL_ACCOUNT Email account within the company mail system. Email sender address of SmartPlant Materials (for example, [email protected]), needed for all email communication. SmartPlant Materials module(s) affected by this setting: A200621, A2049, A6011, A6055,

P2002, P3021, P3024, P3027, P5007, P7073, R3001, SAP2001, SM2011, SM3005, SM4002 Valid values:

FAB_IMPORT_PATH DB server path for Fab Tracking Import jobs. SmartPlant Materials module(s) affected by this setting: P9001 Valid values:

FLUID_IMPORT_PATH DB server path for Fluid Import Jobs. SmartPlant Materials module(s) affected by this setting: S6021 Valid values:



GEOM_PROMPT_SEP Geom Prompt Separator Character. The separator character used for multi-line display of prompts in geometric. SmartPlant Materials module(s) affected by this setting: S4010, S4011, S4012, S4013,

S5020, S5021, S5022 Valid values:

IDENT_CREATION S5006 Ident creation. The filtering mode for spec ident creation in S.50.06. Only the following values have any effect: 'S': If geom1 of the spec item is not empty, it is used for pre-filtering during ident generation. 'N': Geom1 of the spec item does not have any effect on the pre-filtering. This value should be used if working with a non-standard version of the view MV_SPEC_ITEM_IDENTS. SmartPlant Materials module(s) affected by this setting: S5006 Valid values: S, N

IDLE_TIME This DBA setting defines the maximum time (in minutes) the SmartPlant Materials software can be idle. After this time is exceeded, the user is automatically logged off and is prompted to log in again to that session. If this setting is set to '0', the idle time allowed is unlimited. If this setting is set to a positive value, the idle time allowed is the value specified. For example, if this setting is set to 6, the idle time allowed is 6 minutes, after which the user is logged off automatically. Any change in the value for this setting takes effect only after the user logs in again. SmartPlant Materials module(s) affected by this setting: SMARTPLANT Valid values:

JCS_HIDE_SUB_JOBS Hide subjobs in A.60.41? This controls whether sub jobs will be displayed in the JCS Job Monitor screen A.60.41 or not.

The JCS components are optional, so this setting may not apply to you. SmartPlant Materials module(s) affected by this setting: A6041 Valid values: N



JCS_USER_STATUS JCS User Status. May be set to either novice or advanced. If set to advanced, the user will have to enter JCS parameters in screen A.60.42 prior to submitting a batch job. If set to novice, this screen will not be shown and the batch job will be submitted directly, scheduled for immediate background execution. SmartPlant Materials module(s) affected by this setting: A6042, L2003, L3001, OPI1001,

OSCI1001, S6021 Valid values: ADVANCED, NOVICE

KEEP_REPORT_HISTORY Report History: If set to Y, report parameter data will not be deleted after a report completes. SmartPlant Materials module(s) affected by this setting: A6071 Valid values: Y

LOGIN_REQUEST_APT Approval template for login requests. With this setting, you define the default approval template that is added to a login request after submittal. Valid Values: Any Approval Template of type 'Login Request' defined in A.20.45. SmartPlant Materials module(s) affected by this setting: P2002 Valid values:

LOG_EMAIL_HANDLING Write all communication with the mail server into a log file? Default N. If you specify Y, the complete conversation receiving/sending mail is directed to output. Errors will be written to the log file anyway. This feature is only available for mails sent to the quote desk. SmartPlant Materials module(s) affected by this setting: A6055, P3024, P3027, P7073 Valid values: Y



LOG_EWQ_HANDLING Write EWQ Log into log file? This setting controls the generation of log files for early warning queries. If the value is set to 'Y', the log files for early warning queries will be generated. Otherwise, the log files for early warning queries will not be generated. SmartPlant Materials module(s) affected by this setting: A6010 Valid values: Y

LOG_FILE_DEST Log file destination for online jobs. This setting must point to the directory on the Oracle server where log files shall be stored. It must be accessible by the server processes through configuration as UTL_FILE_DIR directory in the instance initialization file. You have the option to define this only here on a global basis, or you can also specify this on a per-project basis with the parameter ZX_MAR_LOG in screen A.20.12/13. If for a specific user environment, the parameter ZX_MAR_LOG is set, then LOG_FILE_DEST from this screen will not be used. SmartPlant Materials module(s) affected by this setting: SmartPlant Reference Data,

SmartPlant Materials Valid values:

LOG_ONLINE_JOBS Create log files for online jobs. If set to Y, online jobs will generate log files. SmartPlant Materials module(s) affected by this setting: SmartPlant Reference Data,

SmartPlant Materials Valid values: Y

LOG_SESSION Keep track of login usage? When this setting is set to 'Y', the login usage of the application is recorded. If this is set to 'N', the Usage data is not recorded. The Usage History and other statistical information can be viewed from screen A.60.83 Usage History. SmartPlant Materials module(s) affected by this setting: A6083 Valid values: Y, N



MTO_OPTIMIZER_MODE Optimizer mode that MTO should use. Once the MTO job is finished, this session parameter is reset to the value that was in effect before the job started. SmartPlant Materials module(s) affected by this setting: R2001 Valid values: CHOOSE, RULE, FIRST_ROWS, ALL_ROWS

MTO_SORT_AREA_SIZE Sort area size that MTO should use. Specify a value between 64K (this is the default) and 256M here. Once the MTO job is finished, this session parameter is reset to the value that was in effect before the job started. SmartPlant Materials module(s) affected by this setting: R2001 Valid values: Any value in the range of 64K to 256M

NEW_USER_BUTTON Administration of button (NEW USER) functionality. With this setting, you control whether the New User button is displayed on the log on screen or not. SmartPlant Materials module(s) affected by this setting: ./. Valid values: N, Y

NLS_SETTING_ON_DB Set the NLS parameter for user after login on the database. If set to Y, the following session NLS settings in the database are set automatically for SmartPlant Reference Data/Materials sessions: NLS_DATE_FORMAT to 'DD-MON-RRRR' NLS_NUMERIC_CHARACTERS to '., ' NLS_LANGUAGE to 'AMERICAN' NLS_TERRITORY to 'AMERICA' This is done by a logon trigger in the schema SYS. SmartPlant Materials module(s) affected by this setting: SmartPlant Reference Data,

SmartPlant Materials Valid values: N, Y



OII_IMPORT_PATH DB server path for OII Import files SmartPlant Materials module(s) affected by this setting: S8011 Valid values:

OMI_INDEX_METHOD OMI Dynamic Input Data Index Method. This specifies the method the OMI main program should use to dynamically index the loaded ASCII data in the interface table. Methods available are: - DRCR (Drop and create): This is the default. Before main processing, OMI drops an existing index, and then recreates it. Subsequent processing can use it. - CRNP (Create if not present): OMI will create the index only if it is not present; if it is already there, it will NOT be dropped or modified. Subsequent processing can use it. - NOT (Do nothing): OMI does nothing in order to index input data. If the index is present, it can be used. If it is not present, it cannot be used and processing is likely to be much slower. - REB (Rebuild): OMI recreates an existing index by issuing an "ALTER INDEX REBUILD" statement. If it is not present, it creates the index. Subsequent processing can use it. SmartPlant Materials module(s) affected by this setting: B4001 Valid values: CRNP, DRCR, NOT, REB

OMI_OPTIMIZER_MODE Optimizer mode that OMI should use. Once the OMI job is finished, this session parameter is reset to the value that was in effect before the job started. SmartPlant Materials module(s) affected by this setting: B4001 Valid values: CHOOSE, RULE, FIRST_ROWS, ALL_ROWS

OMI_SORT_AREA_SIZE Sort area size that OMI should use. Specify a value between 64K (this is the default) and 256M here. Once the OMI job is finished, this session parameter is reset to the value that was in effect before the job started. SmartPlant Materials module(s) affected by this setting: B4001 Valid values: Any value in the range of 64K to 256M



OPI_IMPORT_PATH DB server path for OPI Import jobs. SmartPlant Materials module(s) affected by this setting: OPI1001 Valid values:

ORA_SQL_TRACE SQL Trace. This DBA setting is not to be used by customers. It is only meant for tracking specific problems. SmartPlant Materials module(s) affected by this setting: ./. Valid values:

ORA_TIMED_STATISTICS Timed Statistics. This DBA setting is not to be used by customers. It is only meant for tracking specific problems. SmartPlant Materials module(s) affected by this setting: ./. Valid values:

ORI_IMPORT_PATH DB server path for ORI Import jobs. SmartPlant Materials module(s) affected by this setting: R4003 Valid values:

OSCI_IMPORT_PATH DB server path for OSCI Import jobs. SmartPlant Materials module(s) affected by this setting: OSCI1001 Valid values:

OSD_PATH DB server path for OSD Import/Export jobs. SmartPlant Materials module(s) affected by this setting: C1011 Valid values:



PDB_REPORT_DEST_DB Directory for PDB Report on the Database Server. Directory for the PDB report on the database server. It must end with a concluding '\'. This setting is needed for screen R.30.01 when working with PDB. SmartPlant Materials module(s) affected by this setting: R3001 Valid values:

PLL_EXPORT_PATH DB server path for PLL Export jobs. SmartPlant Materials module(s) affected by this setting: L3002 Valid values:

PLL_IMPORT_PATH DB server path for Process Line List. SmartPlant Materials module(s) affected by this setting: L2003, L3001 Valid values:

PLUS_EXECUTABLE SQL PLUS Executable file name. Globally specifies the name of the Oracle SQL*Plus program. In OMI, this is needed for creating a first-cut import protocol that will be spooled out to a file for each job after the main import program finishes. SmartPlant Materials module(s) affected by this setting: PDMS2002, PDS1010, PDS1012,

PDS1014, PDS2010 Valid values:

POP3_CLEANUP Delete processed e-mails from POP3 stack? Default: Y. Otherwise, the mails are left on the mail server, which could be helpful if severe problems occur. Needed for email communication to SmartPlant Materials. SmartPlant Materials module(s) affected by this setting: A200621, A2049, A6011, A6055,

P2002, P3021, P3024, P3027, P5007, P7073, R3001, SAP2001, SM2011, SM3005, SM4002 Valid values: Y, N



POP3_HOST IP or name of host receiving emails. The IP address (for example, 123.23.42.2) or alias name of the email receiving host. Needed for email communication. SmartPlant Materials module(s) affected by this setting: A200621, A2049, A6011, A6055,


POP3_PASS Password of the system user who receives emails. The password of the SmartPlant Materials email account querying incoming emails. Needed for email communication to SmartPlant Materials. SmartPlant Materials module(s) affected by this setting: A200621, A2049, A6011, A6055,


POP3_PORT Port of email receiving service. The communication port to the email receiving host (in most cases: 110). Needed for email communication. SmartPlant Materials module(s) affected by this setting: A200621, A2049, A6011, A6055,


POP3_REMOVE_UKN_MAILS Delete mails that cannot be identified by the system? Default: N. Should unknown emails be deleted from the email server? Used by email communication to SmartPlant Materials. This feature is only available for screens A.60.55, P.30.24, P.30.22, P.30.27, and P.70.73. SmartPlant Materials module(s) affected by this setting: A6055, P3024, P3027, P7073 Valid values:



POP3_USER System user that receives email. The username for the SmartPlant Materials mail account querying incoming emails. Needed for email communication to SmartPlant Materials. SmartPlant Materials module(s) affected by this setting: A200621, A2049, A6011, A6055,


PRICE_IMPORT_PATH DB server path for Price Load. SmartPlant Materials module(s) affected by this setting: AS1003 Valid values:

RBS_ACC RBS for Account Code. Rollback Segment assigned to J.10.04 Load Account Codes. SmartPlant Materials module(s) affected by this setting: J1004 Valid values:

RBS_DELBOM RBS for Deletion of BOM structures: Rollback Segment assigned to B.20.01.11 Delete Structure. SmartPlant Materials module(s) affected by this setting: B200111 Valid values:

RBS_DOC RBS for document import. Rollback Segment assigned to D.10.01 Load Documents. SmartPlant Materials module(s) affected by this setting: D1001 Valid values:



RBS_DWN RBS for BOM Export. Rollback Segment assigned to B.20.01.44 List Download. SmartPlant Materials module(s) affected by this setting: B200144 Valid values:

RBS_EST RBS for Estimation. Rollback Segment assigned to E.10.11 Estimate Calculation. SmartPlant Materials module(s) affected by this setting: E1011 Valid values:

RBS_FAB RBS for Fab Tracking import. Rollback Segment assigned to P.90.01 Load Fab Tracking. SmartPlant Materials module(s) affected by this setting: P9001 Valid values:

RBS_FAH RBS for Forecast/Reservation Run. Rollback Segment assigned to C.30.01/.11 Forecast/Reservation Run. SmartPlant Materials module(s) affected by this setting: C3001, C3011 Valid values:

RBS_FLUID RBS for Fluid Import Jobs. Rollback Segment assigned to S.60.21 Fluid Import Jobs. SmartPlant Materials module(s) affected by this setting: S6021 Valid values:



RBS_MTO RBS for Material Take Off. Rollback Segment assigned to R.20.01 MTO Jobs. SmartPlant Materials module(s) affected by this setting: R2001 Valid values:

RBS_OII RBS for Open Ident Interface Import/Export. Rollback Segment assigned to S.80.11/.14 OII - Import/Export Jobs. SmartPlant Materials module(s) affected by this setting: S8011, S8014 Valid values:

RBS_OMI RBS for BOM Import. Rollback Segment assigned to B.40.01 BOM Import. SmartPlant Materials module(s) affected by this setting: B4001 Valid values:

RBS_OPI RBS for Open Procurement Interface. Rollback Segment assigned to OPI 10.01 OPI - Import Jobs. SmartPlant Materials module(s) affected by this setting: OPI1001 Valid values:

RBS_ORI RBS for Open Requisition Interface. Rollback Segment assigned to ORI R.40.03 ORI - Import Jobs. SmartPlant Materials module(s) affected by this setting: R4003 Valid values:



RBS_OSCI RBS for Open Supplier/Company Interface. Rollback Segment assigned to OSCI.10.01 OSCI - Import Jobs. SmartPlant Materials module(s) affected by this setting: OSCI1001 Valid values:

RBS_PDMS RBS for PDMS Interface. Rollback Segment assigned to PDMS.20.01 Create PDMS Files. SmartPlant Materials module(s) affected by this setting: PDMS2001 Valid values:

RBS_PDS RBS for PDS Interface. Rollback Segment assigned to PDS.10.12 Generate and View PMC/PCD and PDS.20.10 Generate and View PDS Geom. SmartPlant Materials module(s) affected by this setting: PDS.10.12, PDS.20.10 Valid values:

RBS_PLL RBS for Process Line List. Rollback Segment assigned to L.30.01/.02 PLL - Import/Export Jobs. SmartPlant Materials module(s) affected by this setting: L.20.03, L.30.01, L.30.02 Valid values:

RBS_PROP RBS for inserting new BOM position attributes. Rollback Segment assigned to B.10.04 Position Attributes. SmartPlant Materials module(s) affected by this setting: B1004 Valid values:



RBS_RPLC RBS for BOM Replace. Rollback Segment assigned to B.20.01.29 Search Result/Replace. SmartPlant Materials module(s) affected by this setting: B200129 Valid values:

RBS_SRCH RBS for BOM Search. Rollback Segment assigned to B.20.01.26 Define Search/Repl Condition. SmartPlant Materials module(s) affected by this setting: B200126 Valid values:

RBS_TRAFFIC RBS for traffic import. Rollback Segment assigned to P.80.02 Load Traffic. SmartPlant Materials module(s) affected by this setting: P8002 Valid values:

RBS_VER RBS for BOM Verification. Rollback Segment assigned to B.20.01.35 Verification and Status and B.20.01.41 Start Verification Job. SmartPlant Materials module(s) affected by this setting: B200135, B200141 Valid values:

REPORT_CHECK_INTERVAL Check interval for asynchronous reports in milliseconds. If you start a report in "Batch" mode instead of "Online", the report will be handed to the report server and the screen will be released afterwards, while the report is produced by the report server. If you set the Destype parameter to "Cache", the report pops up on your screen as soon as finished. In the meantime, you can continue working with the system. The check interval specifies how often the system will query the status of the running report. If REPORT_CHECK_INTERVAL is not defined, the interval defaults to 25000 milliseconds. SmartPlant Materials module(s) affected by this setting: A6071 Valid values:



SAP_OPTIMIZER_MODE Optimizer mode for SAP.20.01. This setting is used for the job that is started in SAP 20.01. SmartPlant Materials module(s) affected by this setting: SAP2001 Valid values: CHOOSE, RULE, FIRST_ROWS, ALL_ROWS

SINGLE_SIGN_ON Single Sign On. This variable can be set to 'ON' or 'OFF'. The single sign-on functionality is available only if the value of this DBA setting is set to 'ON'. SmartPlant Materials module(s) affected by this setting: ./. Valid values: ON, OFF

SITE_EXPORT_PATH DB server path for Site Export jobs. SmartPlant Materials module(s) affected by this setting: C1015 Valid values:

SMARTPLANT_WEBCLIENT_FILTER SmartPlant filter argument to pass to web client. This value is used to compose a specific part of the URL to SmartPlant WebClient. It is necessary to guarantee the uniqueness while looking for a document. Specify the following value: 'DynamicRevisionFilterUID'. At the moment, no other values are allowed. SmartPlant Materials module(s) affected by this setting: D1011, D1012, D1021, D9021 Valid values:

SMTP_CLIENT SMTP Client Name or IP. IP or alias name of the database server that should be used for login to the SMTP server. Needed for email communication from SmartPlant Materials. SmartPlant Materials module(s) affected by this setting: A200621, A2049, A6011, A6055,




SMTP_HOST SMTP Host Name (IP or alias) used for sending emails. IP address (for example, 123.23.42.2) or alias name of the host that will deliver outgoing mails. Needed for email communication from SmartPlant Materials. SmartPlant Materials module(s) affected by this setting: A200621, A2049, A6011, A6055,


SMTP_PASS Password of the system user who sends emails Optional password of the system user account who connects to the SMTP_HOST in order to send emails. If no password is given, the email is sent out without transmitting user/password. This is possible at smtp servers that do not require authentication. If you try to deliver emails with a null password to a protected server, you will receive a "SecurityException: Access to default session denied" while if user/password is unknown or incorrect, you will get an "AuthenticationFailedException". SmartPlant Materials module(s) affected by this setting: A200621, A2049, A6011, A6055,

P2002, P2003, P3021, P3022, P3024, P3027, P5007, P7072, P7073, R3001, SAP2001, SM2011, SM3005, SM3007, SM4002, SM4005

Valid values:

SMTP_PORT SMTP Port Number used for sending emails. The port to communicate with SMTP_HOST (in most cases: 25). Needed for email communication from SmartPlant Materials. SmartPlant Materials module(s) affected by this setting: A200621, A2049, A6011, A6055,


SMTP_USER System user for sending email. The system user account that connects to the SMTP_HOST in order to send emails. Only required if SMTP_PASS is set. SmartPlant Materials module(s) affected by this setting: A200621, A2049, A6011, A6055,

P2002, P2003, P3021, P3022, P3024, P3027, P5007, P7072, P7073, R3001, SAP2001, SM2011, SM3005, SM3007, SM4002, SM4005

Valid values:



SQLLDR_EXECUTABLE SQL*Loader executable on client. Globally specifies the name of the Oracle SQL*Loader program. In OMI, this is needed if you want to use SQL*Loader to populate the interface table from flat ASCII files. SmartPlant Materials module(s) affected by this setting: B4001, OPI1001, OSCI1001, S8011 Valid values:

SQLLDR_MIN_SYNC_TIME SQL*Loader Minimum Allowable Sync Time for Concurrent OMI. The value specified here is the minimum allowable synchronization time for SQL*Loader in concurrent OMI jobs. The default is 300 seconds. SmartPlant Materials module(s) affected by this setting: B4001 Valid values:

STACKABLE_ROLES Summarize all roles? With this setting, you define whether you want to stack or summarize a user's roles or not. The value of this setting must be set to 'Y' if you want to work with stacked roles. Please take a look at the documentation of the logon screen to find a detailed description of this feature. SmartPlant Materials module(s) affected by this setting: SmartPlant Reference Data,


SUPER_USER Super user for granting requests for users or rights. Specifies the (super) user who is to receive emails when requests for new users or additional rights are submitted in the log on screen or screen A.20.06.21 Request for Rights. Values for this DBA setting are only valid if the user entered can work with the role that has been defined by DBA setting SUPER_USER_ROLE. SmartPlant Materials module(s) affected by this setting: A200621 Valid values:



SUPER_USER_ROLE Role that has super user rights. Specifies the role that gives super user rights to a user. This setting allows a user to change (that is, reset) other users' passwords in screen A.60.01.03. If a user is logged in with that role, A.60.01.03 is called in super user mode. This role also allows a user to grant access rights via screen A.20.06.21 and to maintain email addresses and the 'Password via Email' field for users. SmartPlant Materials module(s) affected by this setting: A200101, A200102, A2005,

A200621, A600101, A600103, A600201 Valid values:

THEME_COLOR General/project/user color settings. If this indicator is set to Y, A.30.15 selections will become active. SmartPlant Materials module(s) affected by this setting: A3015 Valid values:

TRAFFIC_EXPORT_PATH DB server path for Traffic Export jobs. SmartPlant Materials module(s) affected by this setting: P8001 Valid values:

TRAFFIC_IMPORT_PATH DB server path for Traffic Import jobs. SmartPlant Materials module(s) affected by this setting: P8002 Valid values:

UPD_RULE_BASED_IDENTCODES Update rule ident codes when commodity code is updated? This setting controls automatic updating of Rule Based Ident Codes whenever a Commodity Code is updated either by changing the Group code in S.10.02 or Part Code in S.10.03 or Table Detail Code in S.20.02 or by clicking the 'Build One Commodity' or 'Build CC for Part(s)' buttons in S.30.01. If set to 'Y', then the Rule Based Ident Codes associated with the Commodity Code are also updated. If set to 'N' (default), then the Rule Based Ident Codes are not updated. If any update of the Ident Codes does not result in uniqueness (logical uniqueness as well), then the transaction fails, generating an appropriate message. SmartPlant Materials module(s) affected by this setting: S1002, S1003, S2002, S3001, S3011 Valid values:



USED_COMMENT_VISIBILITY When this DBA setting is set to Y, you see all comments. When this setting is set to 'Y', the project restriction on Used Comments (Screen D.50.21) is no longer valid, which means, for example, you see only data that is not project-dependent, for example, a company's used comments, regardless in which project the comments were created. The default is 'N', which is the same behavior as before. SmartPlant Materials module(s) affected by this setting: D5021 Valid values: Y

USER_COMPLEX_PW Enforce complex password containing letters, numbers, and special characters. This variable can be set to 'Y' or 'N'. When 'Y', the system will force the user to use a complex password when entering a password. A complex password needs to contain letters, numbers, and special characters. SmartPlant Materials module(s) affected by this setting: A2005, A600101, A600103, LOGON Valid values: Y, N

USER_PW_CASE_SENSITIVE Case sensitivity of passwords. This setting determines how case sensitivity in the password field is treated. This variable can be set to 'Y' or 'N'. When 'N', the system will use the uppercase version of the entered password for further processing. When 'Y', the system will use the entered password as-is for further processing. Default value is 'N'. SmartPlant Materials module(s) affected by this setting: A200101, A200102, A600101,

A600103 Valid values: Y, N

USER_PW_CHANGE_DAYS Interval between password changes. Number of days between changing the password. When greater than 0, it forces users to change the password in the specified period. SmartPlant Materials module(s) affected by this setting: A600103 Valid values:



USER_PW_HISTORY Number of passwords kept in history for each user. This history is used to prevent users from using the same password in a short period of time when changing passwords. SmartPlant Materials module(s) affected by this setting: A600101, A600103 Valid values:

USE_LABEL_TEXT Use label text or attribute code as item prompt. With this setting, you can control whether the label text or the attribute code is to be used as an item prompt in the geometric screens. SmartPlant Materials module(s) affected by this setting: S4010, S4011, S4012, S4013,


USE_MULTILINE_GEOM_PROMPT Use Multiline Prompt in Geometrics. Indicates whether prompts for the geometric details fields are displayed in multi-line mode. SmartPlant Materials module(s) affected by this setting: S4010, S4011, S4012, S4013,


WEBUTIL_DIR_AS Download Directory for Webutil AS. Standard download directory on the client for viewing files stored in the database. SmartPlant Materials module(s) affected by this setting: A2049, B200147, D1011, D1012,

D9021, P2001, P2003, P2004, P3027, SM2011, SM3001, SM3002, SM4005, WWWAPPROVE

Valid values:

WEBUTIL_DIR_TS Download Directory for Webutil TS. Download directory on the client for viewing files stored in the database when a terminal server is used. To activate use of this setting, include the following entry in the otherparams definition in your formsweb.cfg file: terminal_software=Y SmartPlant Materials module(s) affected by this setting: A2049, B200147, D1011, D1012,

D9021, P2001, P2003, P2004, P3027, SM2011, SM3001, SM3002, SM4005, WWWAPPROVE

Valid values:


ACC_UPLOAD_DEST Destination for Upload of Account Code files in web environment. Name of the directory into which an uploaded ACC file is to be written on the application server. This name must represent a local disk drive on your application server and must end without a concluding '\'. The value can look like this: 'c:\spmat\your_dir'. Do not enter the name of the application server. This setting is needed for the J.10.04 Import Account Codes screen. SmartPlant Materials module(s) affected by this setting: J1004 Valid values:

ACC_UPLOAD_URL Virtual directory for uploaded Account Code files in web environment. Virtual directory for an uploaded ACC file. This setting must point to the same directory as the ACC_UPLOAD_DEST setting. Please enter a string like 'Your_server_name/your_virtual_directory' without starting with 'http://' and without a concluding '/'. If you have a standard installation according to the web installation guide, you should have a line in your configuration file on the application server that maps the DBA setting value in ACC_UPLOAD_URL to the one in ACC_UPLOAD_DEST.

Both entries end with a slash independent of the operating system, and the URL does not contain the server name. The format is as follows: 'Alias /your_virtual_directory/ "c:\spmat\your_dir/" ' This setting is required for the J.10.04 Import Account Codes screen. SmartPlant Materials module(s) affected by this setting: J1004 Valid values:

ACT_UPLOAD_DEST Destination for Upload of Activity files in web environment. Name of the directory into which an uploaded ACT file is to be written on the application server. This name must represent a local disk drive on your application server and must end without a concluding '\'. The value can look like this: 'c:\spmat\your_dir'. Do not enter the name of the application server. This setting is needed for the J.30.02 Import Activities screen. SmartPlant Materials module(s) affected by this setting: J3002 Valid values:

Application Server-Specific Settings



ACT_UPLOAD_URL Virtual directory for uploaded Activity files in web environment. Virtual directory for an uploaded ACT file. This setting must point to the same directory as setting ACT_UPLOAD_DEST. Please enter a string like 'Your_server_name/your_virtual_directory' without starting with 'http://' and without a concluding '/'. If you have a standard installation according to the web installation guide, you should have a line in your configuration file on the application server that maps the DBA setting value in ACT_UPLOAD_URL to the one in ACT_UPLOAD_DEST. Note that both entries are ended by a slash independent of the operating system, and that the URL does not contain the server name. The format is as follows: 'Alias /your_virtual_directory/ "c:\spmat\your_dir/" ' This setting is required for screen J.30.02 Import Activities. SmartPlant Materials module(s) affected by this setting: J3002 Valid values:

BID_EXPORT_DEST Destination for Bid Export files in web environment. Name of the directory into which a downloaded bid file is to be written on the application server. This name must represent a local disk drive on your application server and must end without a concluding '\'. The value can look like this: 'c:\spmat\your_dir'. This setting is needed for modules P.30.24, P.30.27, and P.60.03. SmartPlant Materials module(s) affected by this setting: P3024, P3027 Valid values:

BID_EXPORT_URL Virtual directory for exported bid files in web environment. Virtual directory for a downloaded bid file. This setting must point to the same directory as setting BID_EXPORT_DEST. Please enter a string like 'Your_server_name/your_virtual_directory' without starting with 'http://' and without a concluding '/'. If you have a standard installation according to the web installation guide, you should have a line in your configuration file on the application server that maps the DBA setting value in BID_EXPORT_URL to the one in BID_EXPORT_DEST. Note that both entries are ended by a slash independent of the operating system, and that the URL does not contain the server name. The format is as follows: 'Alias /your_virtual_directory/ "c:\spmat\your_dir/" ' This setting is required for screens P.30.24 and P.30.27. SmartPlant Materials module(s) affected by this setting: P3024, P3027 Valid values:



BOM_DOWNLOAD_DEST Virtual directory for downloaded BOM files in web environment. Virtual directory for a downloaded BOM file. This setting must point to the same directory as setting BOM_DOWNLOAD_DEST. Please enter a string like 'Your_server_name/your_virtual_directory' without starting with 'http://' and without a concluding '/'. If you have a standard installation according to the web installation guide, you should have a line in your configuration file on the application server that mapsthe DBA setting value in BOM_DOWNLOAD_URL to the one in BOM_DOWNLOAD_DEST. Note that both entries are ended by a slash independent of the operating system, and that the URL does not contain the server name. The format is as follows: 'Alias /your_virtual_directory/ "c:\spmat\your_dir/" ' This setting is required for screen B.20.01.44 if you want to download a file on your client after having created a file on the operating system (online mode). SmartPlant Materials module(s) affected by this setting: B200144 Valid values:

BOM_DOWNLOAD_URL txt SmartPlant Materials module(s) affected by this setting: Valid values:

BOM_EXCEL_MPV_EXPORT_TEMPLATE BOM Multi Position View (MVP) Excel File. Name of the Microsoft Excel file that defines the template for the export of multi position values. SmartPlant Materials module(s) affected by this setting: B200144 Valid values:

BOM_EXCEL_SPV_EXPORT_TEMPLATE BOM Single Position View (SPV) Excel file. Name of the Microsoft Excel file that defines the template for the export of single position values. SmartPlant Materials module(s) affected by this setting: B200144 Valid values:



BOM_EXCEL_TEMPLATE_DIR Directory for Excel Templates. A BOM can be exported in Microsoft Excel format into two predefined templates. The value of this setting points to the path on the application server, where these Microsoft Excel templates are kept. Please note that the path string entered for this setting ends with '\', that is C:\SPMat\Download\ SmartPlant Materials module(s) affected by this setting: B200144 Valid values:

BOM_UPLOAD_DEST Destination for Upload of OMI files in web environment. Name of the directory into which an uploaded OMI file is to be written on the application server. This name must represent a local disk drive on your application server and must end without a concluding '\'. The value can look like this: 'c:\spmat\your_dir'. This setting is needed for screen B.40.01 BOM Import. SmartPlant Materials module(s) affected by this setting: B4001 Valid values:

BOM_UPLOAD_URL Virtual directory for uploaded BOM files in web environment. This setting must point to the same directory as setting BOM_UPLOAD_DEST. Please enter a string like 'Your_server_name/your_virtual_directory' without starting with 'http://' and without a concluding '/'. If you have a standard installation according to the web installation guide, you should have a line in your configuration file on the application server that maps the DBA setting value in BOM_UPLOAD_URL to the one in BOM_UPLOAD_DEST. Note that both entries are ended by a slash independent of the operating system, and that the URL does not contain the server name. The format is as follows: 'Alias /your_virtual_directory/ "c:\spmat\your_dir/" ' This setting is required for screen B.40.01 if you want to work with the OMI import batch mode. The database will use this parameter to fetch the BOM import file from the application server and put it in the BOM_IMPORT_PATH, so that it can be processed by batch jobs. SmartPlant Materials module(s) affected by this setting: B4001 Valid values:



CMS_FILE_UPLOAD_DEST Destination directory for CMS file upload. Path to the published folder name into which an uploaded CMS file is to be written on the application server. This name must represent a local disk drive on your application server and must end without a concluding '\'. The value can look like this: 'c:\spmat\your_dir'. The system can compute and set this value for you. Go to Options and choose the FileUploadURL option, and click Set Default. SmartPlant Materials module(s) affected by this setting: CMS Valid values:

DEFAULT_TNS_NAMES_ENTRY Default TNS name entry (Host string for database). SmartPlant Materials module(s) affected by this setting: A6010, A6011 Valid values:

DOC_TIMEOUT Timeout for File Upload. Time after which the system stops trying to upload a file. This DBA setting is used by screens D.10.11 and D.90.21. A possible value is 10000 (which means time out after 10000 milliseconds). SmartPlant Materials module(s) affected by this setting: D9021 Valid values:

DOC_UPLOAD_CMD_ARGV_TRACE Extended tracing for input parameters. This parameter might help you troubleshoot the upload process. If you set this parameter to Y, the additional trace file doc_upload_trace.log is created in the directory specified by DBA setting DOC_UPLOAD_DEST on the application server. This log file will have the text of the called program will all input parameters. For example: c:\windows\system32\copyfile.exe -c -true "c:\marian\tmp\\mydoc.doc" "\\server\share" "c:\marian\tmp\D1011_12345.log" ACME_DOMAIN USER [Here is password] Phrase [Here is password] is traced instead of real password. Default value for this parameter is N. SmartPlant Materials module(s) affected by this setting: D1011, D9021 Valid values: Y, N



DOC_UPLOAD_DEST Destination for Upload of Document files in web environment. Name of the directory into which an uploaded document or uploaded document import file is to be written on the application server. This name must represent a local disk drive on your application server and must end without a concluding '\'. The value can look like this: 'c:\spmat\your_dir'. Do not enter the name of the application server. This setting is needed for screens D.10.01 Load Documents, D.10.11 Documents, and D.90.21 Attachments ('Documents') folder. SmartPlant Materials module(s) affected by this setting: A607021, D1001, D1011, D9021 Valid values:

DOC_UPLOAD_URL Virtual directory for uploaded document files in web environment. Virtual directory for an uploaded document import file. This setting must point to the same directory as setting DOC_UPLOAD_DEST. Please enter a string like 'Your_server_name/your_virtual_directory' without starting with 'http://' and without a concluding '/'. If you have a standard installation according to the web installation guide, you should have a line in your configuration file on the application server that maps the DBA setting value in DOC_UPLOAD_URL to the one in DOC_UPLOAD_DEST. Note that both entries are ended by a slash independent of the operating system, and that the URL does not contain the server name. The format is as follows: 'Alias /your_virtual_directory/ "c:\spmat\your_dir/" ' This setting is required for screen D.10.01 Load Documents. SmartPlant Materials module(s) affected by this setting: D1001 Valid values:

EULUSER_PUBLIC_CONNECTION Discoverer start parameter. This value comes from the EULUSER connection on the application server. This application has a specific value. Whenever you have created your connection, save this and then view the connection again. A unique number CF_xxx represents this value. Input this value in this field to make sure that the connection to your EULUSER can be found by the BI Discoverer properly. SmartPlant Materials module(s) affected by this setting: DIS1001 Valid values:



EXCEL_COL_CHAR Excel Column Character. SmartPlant Materials module(s) affected by this setting: P3024 Valid values:

EXCEL_DATE_FORMAT Excel Date Format. SmartPlant Materials module(s) affected by this setting: P3024 Valid values:

EXCEL_FUNCTION_IF Translation for IF. The IF keyword in the language of the local Excel installation. SmartPlant Materials module(s) affected by this setting: P3024 Valid values:

EXCEL_FUNCTION_SEP Separator Character for Excel functions. The separator character used for Excel functions in the Excel installation on the application server. SmartPlant Materials module(s) affected by this setting: P3024 Valid values:

EXCEL_FUNCTION_SUM Translation for SUM. SUM keyword in the language of the local Excel installation. SmartPlant Materials module(s) affected by this setting: P3024 Valid values:

EXCEL_MAX_LINES Maximum number of lines for Excel output. SmartPlant Materials module(s) affected by this setting: P7071, P7072, P7074, P8051,

PRINT_TO_F, SM4001 Valid values:



EXCEL_ROW_CHAR Excel Row Character. The character used for the row in R1C1 notation. SmartPlant Materials module(s) affected by this setting: P3024 Valid values:

FAB_UPLOAD_DEST Destination for Upload of Fab track files in web environment. Name of the directory into which an uploaded fab tracking file is to be written on the application server. This name must represent a local disk drive on your application server and must end without a concluding '\'. The value can look like this: 'c:\spmat\your_dir'. Do not enter the name of the application server. This setting is needed for screen P.90.01 Load Fab Tracking. SmartPlant Materials module(s) affected by this setting: P9001 Valid values:

FAB_UPLOAD_URL Virtual directory for uploaded Fab track files in web environment. Virtual directory for an uploaded fab tracking file. This setting must point to the same directory as setting FAB_UPLOAD_DEST. Please enter a string like 'Your_server_name/your_virtual_directory' without starting with 'http://' and without a concluding '/'. If you have a standard installation according to the web installation guide, you should have a line in your configuration file on the application server that maps the DBA setting value in FAB_UPLOAD_URL to the one in FAB_UPLOAD_DEST. Note that both entries are ended by a slash independent of the operating system, and that the URL does not contain the server name. The format is as follows: 'Alias /your_virtual_directory/ "c:\spmat\your_dir/" ' This setting is required for screen P.90.01 Load Fab Tracking. SmartPlant Materials module(s) affected by this setting: P9001 Valid values:

FLC_CUSTOM_SCREEN Name of the custom screen to be called from 'B.40.01 BOM Import' when the FLC Load Option is 'Custom Screen'. This name is the name of the compiled form that exists on the application server (it looks like 'S5007'). The file extension should not be specified. SmartPlant Materials module(s) affected by this setting: B4001 Valid values:



FLUID_UPLOAD_DEST Destination for Upload of Fluid file in web environment. Name of the directory into which an uploaded Fluid file is to be written on the application server. This name must represent a local disk drive on your application server and must end without a concluding '\'. The value can look like this: 'c:\spmat\your_dir'. Do not enter the name of the application server. This setting is needed for screen S.60.21 Fluid Import Jobs. SmartPlant Materials module(s) affected by this setting: S6021 Valid values:

FLUID_UPLOAD_URL Virtual directory for uploaded Fluid files in web environment. Virtual directory for an uploaded Fluid file. This setting must point to the same directory as setting FLUID_UPLOAD_DEST. Please enter a string like 'Your_server_name/your_virtual_directory' without starting with 'http://' and without a concluding '/'. If you have a standard installation according to the web installation guide, you should have a line in your configuration file on the application server that maps the DBA setting value in FLUID_UPLOAD_URL to the one in FLUID_UPLOAD_DEST. Note that both entries are ended by a slash independent of the operating system, and that the URL does not contain the server name. The format is as follows: 'Alias /your_virtual_directory/ "c:\spmat\your_dir/" ' This setting is required for screen S.60.21 Fluid Import Jobs. SmartPlant Materials module(s) affected by this setting: S6021 Valid values:

GRAPHIC_DOWNLOAD_DEST Destination for Download of Graphic files in web environment. Name of the directory into which a downloaded graphic file is to be written on the application server. This name must represent a local disk drive on your application server and must end with a concluding '\'. The value can look like this: 'c:\spmat\your_dir\'. This setting is needed for modules G.10.01, G.10.02, and G.10.03. SmartPlant Materials module(s) affected by this setting: G1001, G1002, G1003 Valid values:



GRAPHIC_DOWNLOAD_URL Virtual directory for downloaded Graphic files in web environment. Virtual directory for downloaded graphic files. This setting must point to the same directory as setting GRAPHIC_DOWNLOAD_DEST. Please enter a string like 'Your_server_name/your_virtual_directory' without starting with 'http://' and without a concluding '/'. If you have a standard installation according to the web installation guide, you should have a line in your configuration file on the application server that maps the DBA setting value in GRAPHIC_DOWNLOAD_URL to the one in GRAPHIC_DOWNLOAD_DEST. Note that both entries are ended by a slash independent of the operating system, and that the URL does not contain the server name. The format is as follows: 'Alias /your_virtual_directory/ "c:\spmat\your_dir/" ' This setting is required for screens G.10.01, G.10.02, and G.10.03 if you want to download files on your client after having saved a file on the operating system. SmartPlant Materials module(s) affected by this setting: G1001, G1002, G1003 Valid values:

GRAPHIC_UPLOAD_DEST Destination for Upload of Graphic files in web environment. Name of the directory into which an uploaded graphic file is to be written on the application server. This name must represent a local disk drive on your application server and must end with a concluding '\'. The value can look like this: 'c:\spmat\your_dir\'. This setting is needed for modules G.10.01, G.10.02, and G.10.03. SmartPlant Materials module(s) affected by this setting: G1001, G1002, G1003, ISK1001 Valid values:

HELP_DOC_DEST Destination for Upload of Help files in web environment. Name of the directory into which an uploaded help file is to be written on the application server. This name must represent a local disk drive on your application server and must end with a concluding '\'. The value can look like this: 'c:\spmat\your_dir\'. The standard value is '%iAS_HOME%\web_entry\documentation\ This setting is needed for modules A.60.63, A.60.70.01, and A.60.70.21. SmartPlant Materials module(s) affected by this setting: SmartPlant Reference Data,




HELP_DOC_URL Virtual directory for Help files in web environment. Virtual directory for an uploaded Document. This setting must point to the same directory as setting HELP_DOC_DEST. Please enter a string like 'Your_server_name/your_virtual_directory' without starting with 'http://' and without a concluding '/'. If you have a standard installation according to the web installation guide, you should have a line in your configuration file on the application server that maps the DBA setting value in HELP_DOC_URL to the one in HELP_DOC_DEST. Note that both entries are ended by a slash independent of the operating system, and that the URL does not contain the server name. The format is as follows: 'Alias /your_virtual_directory/ "c:\spmat\your_dir/" ' The standard value is /marian_webentry/' This setting is needed for modules A.60.63, A.60.70.01, and A.60.70.21. SmartPlant Materials module(s) affected by this setting: SmartPlant Reference Data,


HOME_PAGE_URL Menu Help - SmartPlant Home page. SmartPlant Materials module(s) affected by this setting: MENU Valid values:

IMPORT_FROM_FILE_DEST Destination for Import of csv files. Name of the directory into which an uploaded Excel import file is to be written on the application server. This name must represent a local disk drive on your application server and must end with a concluding '\'. The value can look like this: 'c:\spmat\your_dir\'. SmartPlant Materials module(s) affected by this setting: A3008, A3012 Valid values:

MS_DOWNLOAD_DEST Destination for Excel Export from Requisition Milestones. Virtual directory for a downloaded and generated Excel export file from requisition milestones. The value can look like this: 'c:\spmat\your_dir\'. This setting must point to the same directory as setting MS_DOWNLOAD_URL. SmartPlant Materials module(s) affected by this setting: P6003 Valid values:



MS_DOWNLOAD_URL Virtual directory for generated Milestone Excel sheets in web environment. Virtual directory for a downloaded and generated Excel export file from requisition milestones. Please enter a string like 'Your_server_name/your_virtual_directory' without starting with 'http://' and without a concluding '/'. This setting must point to the same directory as setting MS_DOWNLOAD_DEST. SmartPlant Materials module(s) affected by this setting: P6003 Valid values:

MTR_DOWNLOAD_URL Virtual directory for downloaded MTR files in web environment. Virtual directory for an downloaded MTR file. This setting must point to the same directory as setting MTR_UPLOAD_DEST. Please enter a string like 'Your_server_name/your_virtual_directory' without starting with 'http://' and without a concluding '/'. If you have a standard installation according to the web installation guide, you should have a line in your configuration file on the application server that maps the DBA setting value in MTR_DOWNLOAD_URL to the one in MTR_UPLOAD_DEST. Note that both entries are ended by a slash independent of the operating system, and that the URL does not contain the server name. The format is as follows: 'Alias /your_virtual_directory/ "c:\spmat\your_dir/" ' This setting is required for screen C.20.15 Material Transfer. SmartPlant Materials module(s) affected by this setting: C2015 Valid values:

MTR_UPLOAD_DEST Destination for Upload of MTR files in web environment. Name of the directory into which an uploaded Excel import file is to be written on the application server. This name must represent a local disk drive on your application server and must end with a concluding '\'. The value can look like this: 'c:\spmat\your_dir\'. SmartPlant Materials module(s) affected by this setting: C2015 Valid values:



M_EUL_PUBLIC_CONNECTION Discoverer start parameter. This value comes from the M_EUL connection on the application server. This application has a specific value. Whenever you have created your connection, save this and then view the connection again. A unique number CF_xxx represents this value. Input this value in this field to make sure that the connection to your M_EUL can be found by the BI Discoverer properly. SmartPlant Materials module(s) affected by this setting: DIS1001 Valid values:

OII_DOWNLOAD_DEST Destination for Download of OII files in web environment. Name of the directory into which a downloaded OII file is to be written on the application server. This name must represent a local disk drive on your application server and must end with a concluding '\'. The value can look like this: 'c:\spmat\your_dir\'. This setting is needed for module S.80.14 OII - Export Jobs. SmartPlant Materials module(s) affected by this setting: S8014 Valid values:

OII_DOWNLOAD_URL Virtual directory for downloaded OII files in web environment. Virtual directory for a downloaded OII file. This setting must point to the same directory as setting OII_DOWNLOAD_DEST. Please enter a string like 'Your_server_name/your_virtual_directory' without starting with 'http://' and without a concluding '/'. If you have a standard installation according to the web installation guide, you should have a line in your configuration file on the application server that maps the DBA setting value in OII_DOWNLOAD_URL to the one in OII_DOWNLOAD_DEST. Note that both entries are ended by a slash independent of the operating system, and that the URL does not contain the server name. The format is as follows: 'Alias /your_virtual_directory/ "c:\spmat\your_dir/" ' This setting is required for screen S.80.14 if you want to download a file on your client after having created a file on the operating system (online mode). SmartPlant Materials module(s) affected by this setting: S8014 Valid values:



OII_EXPORT_PATH DB server path for OII Export files. SmartPlant Materials module(s) affected by this setting: S8014 Valid values:

OII_UPLOAD_DEST Destination for Upload of OII files in web environment. Name of the directory into which an uploaded OII file is to be written on the application server. This name must represent a local disk drive on your application server and must end without a concluding '\'. The value can look like this: 'c:\spmat\your_dir'. Do not enter the name of the application server. This setting is needed for screen S.80.11 OII - Import Jobs. SmartPlant Materials module(s) affected by this setting: S8011 Valid values:

ONLINE_REFERENCE_LIBRARY_URL Menu Help - Printable Guides. This setting is used to set the URL for the menu Help / Printable Guides to call the Printable Guides start page. The default value is <your Application Server>/marian_webentry/default.htm. The URL points on the application server to the directory <SPMAT Home>/web_entry. SmartPlant Materials module(s) affected by this setting: MENU Valid values:

OPI_UPLOAD_DEST Destination for Upload of OPI files in web environment. Name of the directory into which an uploaded OPI file is to be written on the application server. This name must represent a local disk drive on your application server and must end without a concluding '\'. The value can look like this: 'c:\spmat\your_dir'. Do not enter the name of the application server. This setting is needed for screen OPI 10.01 OPI - Import Jobs. SmartPlant Materials module(s) affected by this setting: OPI1001 Valid values:



OPI_UPLOAD_URL Virtual directory for uploaded OPI files in web environment. Virtual directory for an uploaded OPI file. This setting must point to the same directory as setting OPI_UPLOAD_DEST. Please enter a string like 'Your_server_name/your_virtual_directory' without starting with 'http://' and without a concluding '/'. If you have a standard installation according to the web installation guide, you should have a line in your configuration file on the application server that maps the DBA setting value in OPI_UPLOAD_URL to the one in OPI_UPLOAD_DEST. Note that both entries are ended by a slash independent of the operating system, and that the URL does not contain the server name. The format is as follows: 'Alias /your_virtual_directory/ "c:\spmat\your_dir/" ' This setting is required for screen OPI 10.01 OPI - Import Jobs. SmartPlant Materials module(s) affected by this setting: OPI1001 Valid values:

ORI_UPLOAD_DEST Destination for Upload of ORI files in web environment. Name of the directory into which an uploaded ORI file is to be written on the application server. This name must represent a local disk drive on your application server and must end without a concluding '\'. The value can look like this: 'c:\spmat\your_dir'. Do not enter the name of the application server. This setting is needed for screen R.40.03 ORI - Import Jobs. SmartPlant Materials module(s) affected by this setting: R4003 Valid values:

ORI_UPLOAD_URL Virtual directory for uploaded ORI files in web environment. Virtual directory for an uploaded ORI file. This setting must point to the same directory as setting ORI_UPLOAD_DEST. Please enter a string like 'Your_server_name/your_virtual_directory' without starting with 'http://' and without a concluding '/'. If you have a standard installation according to the web installation guide, you should have a line in your configuration file on the application server that maps the DBA setting value in ORI_UPLOAD_URL to the one in ORI_UPLOAD_DEST. Note that both entries are ended by a slash independent of the operating system, and that the URL does not contain the server name. The format is as follows: 'Alias /your_virtual_directory/ "c:\spmat\your_dir/" ' This setting is required for screen R.40.03 ORI - Import Jobs. SmartPlant Materials module(s) affected by this setting: R4003 Valid values:



OSCI_UPLOAD_DEST Destination for Upload of OSCI files in web environment. Name of the directory into which an uploaded OSCI file is to be written on the application server. This name must represent a local disk drive on your application server and must end without a concluding '\'. The value can look like this: 'c:\spmat\your_dir'. Do not enter the name of the application server. This setting is needed for screen OSCI 10.01 OSCI - Import Jobs. SmartPlant Materials module(s) affected by this setting: OSCI1001 Valid values:

OSCI_UPLOAD_URL Virtual directory for uploaded OSCI files in web environment. Virtual directory for an uploaded OSCI file. This setting must point to the same directory as setting OSCI_UPLOAD_DEST. Please enter a string like 'Your_server_name/your_virtual_directory' without starting with 'http://' and without a concluding '/'. If you have a standard installation according to the web installation guide, you should have a line in your configuration file on the application server that maps the DBA setting value in OSCI_UPLOAD_URL to the one in OSCI_UPLOAD_DEST. Note that both entries are ended by a slash independent of the operating system, and that the URL does not contain the server name. The format is as follows: 'Alias /your_virtual_directory/ "c:\spmat\your_dir/" ' This setting is required for screen OSCI 10.01 OSCI - Import Jobs. SmartPlant Materials module(s) affected by this setting: OSCI1001 Valid values:

PDB_REPORT_DEST Destination for Upload of PDB Report in web environment. Name of the directory into which an uploaded PDB report is to be written on the application server. This name must represent a local disk drive on your application server and must end without a concluding '\'. The value can look like this: 'c:\spmat\your_dir'. Do not enter the name of the application server. This setting is needed for screen R.30.01 when working with PDB. SmartPlant Materials module(s) affected by this setting: R3001 Valid values:



PDB_REPORT_URL Virtual directory for PDB Report files in web environment. Virtual directory for an uploaded report file. This setting must point to the same directory as setting PDB_REPORT_DEST. Please enter a string like 'Your_server_name/your_virtual_directory' without starting with 'http://' and without a concluding '/'. If you have a standard installation according to the web installation guide, you should have a line in your configuration file on the application server that maps the DBA setting value in PDB_REPORT_URL to the one in PDB_REPORT_DEST. Note that both entries are ended by a slash independent of the operating system, and that the URL does not contain the server name. The format is as follows: 'Alias /your_virtual_directory/ "c:\spmat\your_dir/" ' This setting is needed for screen R.30.01 when working with PDB. SmartPlant Materials module(s) affected by this setting: R3001 Valid values:

PDMS_DOWNLOAD_DEST Destination for Download of PDMS files in web environment. Name of the directory into which downloaded PDMS files are to be written on the application server. This name must represent a local disk drive on your application server and must end with a concluding '\'. The value can look like this: 'c:\sprd\your_dir\'. This setting is needed for modules PDMS 10.02 and PDMS 20.01. SmartPlant Materials module(s) affected by this setting: PDMS1002, PDMS2001 Valid values:

PDMS_DOWNLOAD_URL Virtual directory for downloaded PDMS files in web environment. Virtual directory for downloaded PDMS files. This setting must point to the same directory as setting PDMS_DOWNLOAD_DEST. Please enter a string like 'Your_server_name/your_virtual_directory' without starting with 'http://' and without a concluding '/'. If you have a standard installation according to the web installation guide, you should have a line in your configuration file on the application server that maps the DBA setting value in PDMS_DOWNLOAD_URL to the one in PDMS_DOWNLOAD_DEST. Note that both entries are ended by a slash independent of the operating system, and that the URL does not contain the server name. The format is as follows: 'Alias /your_virtual_directory/ "c:\sprd\your_dir/" ' This setting is required for screens PDMS 10.02 and PDMS 20.01 if you want to download files on your client after having created them on the operating system (online mode). SmartPlant Materials module(s) affected by this setting: PDMS1002, PDMS2001 Valid values:



PDS_DOWNLOAD_DEST Destination for Download of PDS files in web environment. Name of the directory into which downloaded PDS files are to be written on the application server. This name must represent a local disk drive on your application server and must end without a concluding '\'. The value can look like this: 'c:\sprd\your_dir'. This setting is needed for modules PDS 10.10, PDS 10.12, PDS 10.14, and PDS 20.10. Before PDS_DOWNLOAD_DEST is being taken, the project default ZI_PDS_DIR will be evaluated and used if not empty. SmartPlant Materials module(s) affected by this setting: PDS1010, PDS1012, PDS1014,

PDS2010 Valid values:

PDS_DOWNLOAD_URL Virtual directory for downloaded PDS files in web environment. Virtual directory for downloaded PDS files. This setting must point to the same directory as setting PDS_DOWNLOAD_DEST. Please enter a string like 'Your_server_name/your_virtual_directory' without starting with 'http://' and without a concluding '/'. If you have a standard installation according to the web installation guide, you should have a line in your configuration file on the application server that maps the DBA setting value in PDS_DOWNLOAD_URL to the one in PDS_DOWNLOAD_DEST. Note that both entries are ended by a slash independent of the operating system, and that the URL does not contain the server name. The format is as follows: 'Alias /your_virtual_directory/ "c:\sprd\your_dir/" ' This setting is required for screens PDS 10.10, PDS 10.12, PDS 10.14, and PDS 20.10 if you want to download files on your client after having created files on the operating system. Before PDS_DOWNLOAD_URL is being taken, the project default ZI_PDS_URL will be evaluated and used if not empty. SmartPlant Materials module(s) affected by this setting: PDS1010, PDS1012, PDS1014,

PDS2010 Valid values:

PLL_DOWNLOAD_DEST Destination for Download of PLL files in web environment. Name of the directory into which a downloaded PLL file is to be written on the application server. This name must represent a local disk drive on your application server and must end with a concluding '\'. The value can look like this: 'c:\spmat\your_dir\'. This setting is needed for module L.30.02 PLL - Export Jobs. SmartPlant Materials module(s) affected by this setting: L3002 Valid values:



PLL_DOWNLOAD_URL Virtual directory for downloaded PLL files in web environment. Virtual directory for downloaded PLL files. This setting must point to the same directory as setting PLL_DOWNLOAD_DEST. Please enter a string like 'Your_server_name/your_virtual_directory' without starting with 'http://' and without a concluding '/'. If you have a standard installation according to the web installation guide, you should have a line in your configuration file on the application server that maps the DBA setting value in PLL_DOWNLOAD_URL to the one in PLL_DOWNLOAD_DEST. Note that both entries are ended by a slash independent of the operating system, and that the URL does not contain the server name. The format is as follows: 'Alias /your_virtual_directory/ "c:\spmat\your_dir/" ' This setting is required for screen L.30.02 if you want to download files on your client after having created them on the operating system (online mode). SmartPlant Materials module(s) affected by this setting: L3002 Valid values:

PLL_UPLOAD_DEST Destination for Upload of PLL files in web environment. Name of the directory into which an uploaded PLL file is to be written on the application server. This name must represent a local disl drive on your application server and must end without a concluding '\'. The value can look like this: 'c:\spmat\your_dir'. Do not enter the name of the application server. This setting is needed for screen L.30.01 PLL - Import Jobs. SmartPlant Materials module(s) affected by this setting: L3001 Valid values:

PLL_UPLOAD_URL Virtual directory for uploaded PLL files in web environment. Virtual directory for an uploaded PLL file. This setting must point to the same directory as setting PLL_UPLOAD_DEST. Please enter a string like 'Your_server_name/your_virtual_directory' without starting with 'http://' and without a concluding '/'. If you have a standard installation according to the web installation guide, you should have a line in your configuration file on the application server that maps the DBA setting value in PLL_UPLOAD_URL to the one in PLL_UPLOAD_DEST. Note that both entries are ended by a slash independent of the operating system, and that the URL does not contain the server name. The format is as follows: 'Alias /your_virtual_directory/ "c:\spmat\your_dir/" ' This setting is required for screen L.30.01 PLL - Import Jobs. SmartPlant Materials module(s) affected by this setting: L3001 Valid values:



PRICE_LIST_DOWNLOAD_URL Virtual directory for downloaded Price List files in web environment. Please enter a string like 'Your_server_name/your_virtual_directory' without starting with 'http://' and without a concluding '/'. The format is as follows: 'Alias /your_virtual_directory/ "c:\spmat\your_dir/" ' This setting is required for screen AS.10.05 Price Lists. SmartPlant Materials module(s) affected by this setting: AS1005 Valid values:

PRICE_LIST_EXPORT_DEST Destination for Download of Price List Excel files in web environment. Path for Download of Price List Export XLS. Please enter a string like 'Your_server_name/your_virtual_directory' without starting with 'http://' and without a concluding '/'. The format is as follows: 'Alias /your_virtual_directory/ "c:\spmat\your_dir/" ' This setting is required for screen AS.10.05 Price Lists. SmartPlant Materials module(s) affected by this setting: AS1005 Valid values:

PRICE_LIST_IMPORT_DEST Destination for Upload of Price List Excel files in web environment. Path for Upload of Price List Export XLS. Please enter a string like 'Your_server_name/your_virtual_directory' without starting with 'http://' and without a concluding '/'. The format is as follows: 'Alias /your_virtual_directory/ "c:\spmat\your_dir/" ' This setting is required for screen AS.10.05 Price Lists. SmartPlant Materials module(s) affected by this setting: AS1005 Valid values:

PRICE_UPLOAD_DEST Destination for Upload of Price Import files in web environment. Name of the directory into which an uploaded price file is to be written on the application server. This name must represent a local disk drive on your application server and must end without a concluding '\'. The value can look like this: 'c:\spmat\your_dir'. Do not enter the name of the application server. This setting is needed for screen AS 10.03 Load Prices. SmartPlant Materials module(s) affected by this setting: AS1003 Valid values:



PRICE_UPLOAD_URL Virtual directory for uploaded Price files in web environment. Virtual directory for an uploaded price file. This setting must point to the same directory as setting PRICE_UPLOAD_DEST. Please enter a string like 'Your_server_name/your_virtual_directory' without starting with 'http://' and without a concluding '/'. If you have a standard installation according to the web installation guide, you should have a line in your configuration file on the application server that maps the DBA setting value in PRICE_UPLOAD_URL to the one in PRICE_UPLOAD_DEST. Note that both entries are ended by a slash independent of the operating system, and that the URL does not contain the server name. The format is as follows: 'Alias /your_virtual_directory/ "c:\spmat\your_dir/" ' This setting is required for screen AS 10.03 Load Prices. SmartPlant Materials module(s) affected by this setting: AS1003 Valid values:

PRINT_TO_FILE_DEST Destination for print to file in web environment. Name of the directory used by functionality 'Print to File'. This name must represent a local disk drive on your application server and must end with a concluding '\'. The value can look like this: 'c:\sp\your_dir\'. SmartPlant Materials module(s) affected by this setting: PRINT_TO_F Valid values:

PRINT_TO_FILE_SEP Print to file Separator for general Excel export. The separator character for the generation of CSV files (Export format='Excel). This setting is dependent on the country specific installation of Excel on the client. Default value = ; SmartPlant Materials module(s) affected by this setting: PRINT_TO_F Valid values:

PRINT_TO_FILE_URL Virtual directory for print to file in web environment. Virtual directory for functionality 'Print to File'. This setting must point to the same directory as setting PRINT_TO_FILE_DEST. Please enter a string like 'Your_server_name/your_virtual_directory' without starting with 'http://' and without a concluding '/'. If you have a standard installation according to the web installation guide, you should have a line in your configuration file on the application server that maps the DBA setting value in PRINT_TO_FILE_URL to the one in PRINT_TO_FILE_DEST. Note that both entries are ended by a slash independent of the operating system, and that the URL does not contain the server name. The format is as follows: 'Alias /your_virtual_directory/ "c:\sp\your_dir/" ' SmartPlant Materials module(s) affected by this setting: PRINT_TO_F Valid values:



PROG_URL URL of the SmartPlant Materials application (without config parameter); used to create the link in Early Warning emails. SmartPlant Materials module(s) affected by this setting: A6010, A6011 Valid values:

QS_DOC_DOWNLOAD_URL Virtual directory for uploaded Quote Summary documents in web environment. The URL hostname/path to download/view quote documents from the application server. Please enter a string like 'Your_server_name/your_virtual_directory' without starting with 'http://' and without a concluding '/'. If you have a standard installation according to the web installation guide, you should have a line in your configuration file that maps the DBA setting value in QS_DOC_DOWNLOAD_URL and the project default ZP_QSD_UPP. Note that both entries are ended by a slash independent of the operating system, and that the URL doesn't contain the server name. The format is as following: 'Alias /your_virtual_directory/ "c:\spmat\your_dir/" '. SmartPlant Materials module(s) affected by this setting: P3022 Valid values:

QS_DOC_SERVLET Quote Summary Document Upload Servlet URL. The URL hostname/path to upload quote documents of the bidder to the webserver without the classname of the servlet. Path in the file system of the application server for servlets, including the name of the application server. Here you have to specify your application server and the directory of the servlets, such as 'your_servername/j2ee/servlet'. Please do not enter a value starting with "http://" or ending with "/". The word '/servlet' is applicable for you if you installed the application the normal way as described in the installation guide. The setting is needed when uploading files for quote summaries in screen P.30.22 Commercial Evaluation, folder Files. SmartPlant Materials module(s) affected by this setting: P3022 Valid values:



REL_MAN_FILE_DEST Destination for Release management files in web environment. Name of the directory at the forms server that will be used for the release management screen A.60.70.01. The scripts for the release management will be stored in this path. SmartPlant Materials module(s) affected by this setting: A607001 Valid values:

REL_MAN_MODULE_PATH Path where the *.fmx files (forms) are stored on the application server. This is the path on the forms server where the FMX files are stored. It will be used by screens A.60.70.01 and A.60.70.13 to update the sizes and dates from modules. SmartPlant Materials module(s) affected by this setting: A607001, A607013 Valid values:

REL_MAN_REPORT_PATH Path where the *.rdf files (reports) are stored on the application server. This is the path on the forms server where the RDF files are stored. It will be used by screens A.60.70.01 and A.60.70.13 to update the sizes and dates from modules. SmartPlant Materials module(s) affected by this setting: A607001, A607013 Valid values:

REPORT_DOCU_URL Menu Help - Report Document Library. This setting is used to set the URL for the Reports Document Library / Report Help to call the Reports Document Library start page. The default value is <your Application Server>/marian_webentry/default.htm. The URL points on the application server to the directory <SPMAT Home>/web_entry. SmartPlant Materials module(s) affected by this setting: MENU Valid values:

REPORT_SERVER Report Server Name. The name of the report server is required if you want to use the Oracle report server architecture for running reports. The latter is required if you want to start reports in "Batch" mode without using JCS. The report server name is generated with the syntax “ReportsServer_” + <your_machine_name> + “_asinst_1”. For example, with the machine name INGR-AS01, the report server name would be ‘Reports_Server_INGR-AS01_asinst_1’. You can find the name in the Oracle Enterprise Manager (http://<your_machine_name>:7001/em) at the node Farm_ClassicDomain/Reports. Or, you can find it on the file system underneath Oracle/Middleware/asinst_1/ReportsServerComponent.



SmartPlant Materials module(s) affected by this setting: A6071 Valid values:

SERVLET_PATH Servlet Path in the file system of the web server. Path in the file system of the application server for servlets, including the name of the application server. Here you have to specify your application server and the directory of the servlets, as 'your_servername/j2ee/servlet'. Please do not enter a value starting with "http://" or ending with "/". The word '/servlet' is applicable for you if you installed the application the normal way as described in the web installation guide. You have to maintain this value if you want to work with modules where a file upload is performed such as B.40.01 OMI Import, G.10.01 Company Symbols, or S.80.11 OII - Import Jobs. SmartPlant Materials module(s) affected by this setting: A3008, A3012, B4001, D1001,

G1001, G1002, G1003, ISK1001, L3001, OPI1001, OSCI1001, P2003, S6021, S8011 Valid values:

SITE_EXPORT_DEST Destination for Site Export files in web environment. Name of the directory into which a downloaded Site export file is to be written on the application server. This name must represent a local disk drive on your application server and must end without a concluding '\'. The value can look like this: 'c:\spmat\your_dir'. This setting is needed for module C.10.15 Site Export Jobs. SmartPlant Materials module(s) affected by this setting: C1015 Valid values:

SITE_EXPORT_URL Virtual directory for Site Export files in web environment. Virtual directory for a downloaded site export file. This setting must point to the same directory as setting SITE_EXPORT_DEST. Please enter a string like 'Your_server_name/your_virtual_directory' without starting with 'http://' and without a concluding '/'. If you have a standard installation according to the web installation guide, you should have a line in your configuration file on the application server that maps the DBA setting value in SITE_EXPORT_URL to the one in SITE_EXPORT_DEST. Note that both entries are ended by a slash independent of the operating system, and that the URL does not contain the server name. The format is as follows: 'Alias /your_virtual_directory/ "c:\spmat\your_dir/" ' This setting is required for screen C.10.15 if you want to download a file on your client after having created a file on the operating system (online mode). SmartPlant Materials module(s) affected by this setting: C1015 Valid values:



SMARTPLANT_WEBCLIENT_URL URL to SmartPlant web client. You must specify a valid value, for example: http://<your-SmartPlant-webserver>/efasp37/WebClient/SPF.asp. Ask your SmartPlant administrator for the exact notation. SmartPlant Materials module(s) affected by this setting: D1011, D1012, D1021, D9021 Valid values:

SPF_REPORT_DEST Destination for Upload of SPF Reports in web environment. Local path on the application server, where the created reports will be stored. SmartPlant Materials module(s) affected by this setting: P5007, R3001 Valid values:

SPF_REPORT_PATH_UNC UNC path to the application server share where the view files to be published can be found. Example: \\myappserver.mydomain\myshare\ SmartPlant Materials module(s) affected by this setting: P5007, R3001, SP3D2001 Valid values:

WEBHELP_SERVER Host: port of the server providing the WebHelp documents. The hostname of the computer where the online help is stored. In most cases, it will be the name of the application server, but it could also be on another machine. SmartPlant Materials module(s) affected by this setting: SmartPlant Reference Data,


WEB_APPROVAL_URL URL for web approval, containing the application server and configuration for the web approval. SmartPlant Materials module(s) affected by this setting: A2049 Valid values:



XLS_FORMAT Excel Format. The extension of a workbook can be xls or xlsx. SmartPlant Materials module(s) affected by this setting: SP3D2001 Valid values: xls, xlsx

Download - SmartPlant Materials DBA Settings - Hyundai Engineeringspmat.hec.co.kr/marian_webentry/PDFs/SPMAT DBA Settings.pdf · NLS_SETTING_ON_DB ... PDMS_DOWNLOAD_DEST ... SmartPlant Materials

Top Related