Download - pool line - uploads-ssl.webflow.com
pool line
Easy Sanitary Solutions has more than 20 years of
experience in residential water drainage. In addition to our
Easy Drain shower drains, a special drain is developed for
pools and spas. This drain has guaranteed waterproofing
and is suitable for both indoor and outdoor use. With the
pool line system it is easy to design a custom pool drain
by connecting predefined or custom length drain pieces.
Insired by the popular Modulo TAF series, the pool drain
contains a height adjustable frame, waterproofing
membrane and tilable trim.
American Copper Buildings, New York City
The Water Protection System (WPS) provides an easy-to-install and safe-to-
assemble seal system for shower drains. This WPS-system consists of a flexible
waterproofing membrane which is connected to the drain’ stainless steel
flanges or the floor drain’s special cuff. ESS offers lifetime warranty on leakage
for drains with WPS.
The Tile Adjustable Frame (TAF) is fully adjustable at the time of
tiling. TAF creates a finished edge, and ensures a perfect fit with any
thickness of floor material.
Trim (tile insert: 1/2”)
Rough (2” tail piece)
LINEAR POOL DRAIN
Height adjustable frame TAF 1/4 - 3/4” (7 - 18 mm)
Waterproofing membrane WPS pre-assembled waterproofing membrane
Max. capacity 11 gal (US) / min (42 l/min)
Material (rough) stainless steel (type 316)
Material (frame & trim) stainless steel (type 316)
Trim tileable | tile insert: 1/2” (12 mm)
Width (rough) 4 1/2“ (113 mm)
Width (frame) 2 1/2” (62 mm)
Width (trim) 1 3/4” (45 mm)
Outlet Ø2” tail piece
Approvals UPC, cUPC, ISO 9001, Mass-code
The linear pool drain system contains several drain pieces which can be easily connected to
each other, to form the entire pool drain. Each drain piece consists of a stainless steel rough,
waterproofing membrane (WPS), a height adjustable frame (TAF) and a tileable trim.
CUSTOM LENGTH
STANDARD LENGTH WITH CENTRAL OUTLET
CORNER PIECE
END PIECE
15 3/4” 47 1/4”
15 3
/4”
15 3
/4”
47 1/
4”
Determine the size and shape of the pool drain. The order form shows all standard size drain parts
such as straight pieces, corner pieces, end pieces and connectors. It is also possible to order a
custom length straight piece with or without outlet. Dimensions are based on the size of the TAF frame which is visible after tiling the floor, see technical image of the custom length piece.
Every drain piece is delivered with one rough connector, two frame connectors and a waterproofing
set. Always check the installation advice before installing the drain.
SET-UP
Dimensional sketch. Dimensions are based on the size of the TAF frame, not the rough size.
Easy Drain pool line consists of different pieces and an option for a custom length piece. Each stan-
dard straight piece is 47 1/4” (1200 mm), the end piece and corner piece are 15 3/4” (400 mm) in
length.
Straight, no outlet Straight, centric outlet Straight, excentric outlet
End pieceCorner piece Rough connector Frame connectors (2x)
Custom length47 1/4” (1200 mm) 47 1/4” (1200 mm) 47 1/4” (1200 mm)
COMPONENTS
PD-02 PD-03 PD-04PD-01
PD-05 PD-06 PD-07 PD-08
CUSTOM LENGTH (PD-01)
A
B
TAF
HEI
GH
T
WPS
FRA
ME
WID
TH
ROU
GH
WID
TH
15 3/4” (400 mm)
Length (A) min. 15 3/4” (400 mm)max. 70 7/8” (1200 mm)
Outlet distance (B) min. 5 7/8” (150 mm)
Rough width 4 1/2” (113 mm)
Frame width 2 1/2” (62 mm)
Trim tileable | tile insert: 1/2” (12 mm)
The custom length piece is a straight drain with
two open ends. This custom length piece can be
ordered with or without 2” tail piece.
15 3/4” (400 mm)
Technical drawing: custom length piece
Technical amendm
ents and printing errors reserved / Salvo errori e omissioni / Bajo reserva de m
odificaciones técnicas y errores de impresión.
© U
SA-2018
Easy Sanitary SolutionsNijverheidsstraat 60, 7575 BK Oldenzaal, The Netherlands
T: +31 541 200 800 | F: +31 541 200 899 [email protected] www.easydrain.com
ESS PRODUCTS ARE PATENTED AND REGISTRATED TRADEMARKS MADE BY ESS