Download - openPicus miniUSB programmer datasheet
Rev.1 03/02/2012 P 1
Facts
Benefits
• Easy to install
• Easy to manage and use
• Easy to interface
• Zero Time for development
• Open source
compact USB Programmer
• Mini USB connector
• 6 pin programming
interface
• Easy install drivers
• openPICUS Free IDE
• Serial Bootloader
• 5V power supply
• 51*27.5mm
Devices
• Flyport Wi-Fi
• Flyport Ethernet
• Expansion Nests
[email protected] www.eikonsite.it tel +39 0721 0730896 Eikon srl, Rome (RM), Italy
Introduction
Each Flyport module has a serial bootloader preloaded onboard.
The miniUSB PROGRAMMER is a USB to Serial (UART) con-
verter with a 6 ways female pin header connector. It is the standard programming interface for the expansion boards.
The miniUSB PROGRAMMER provides 5V power supply to the
boards.
The miniUSB PROGRAMMER is 100% compatible with the openPICUS Free IDE
USB interface mini USB B-type (cable not provided)
Programming interface 6 ways pin header at 2.54mm (0.10”) pitch
Device Reset MOSFET onboard
Communication RESET and UART communication
Power supply 5V output
Compact dimensions 51 * 27.5 mm
Rev.1 03/02/2012 P 2
JP2 PINOUT — Programming Connector
Pin Name Function
1 +5V 5V power supply
2 NC NC
3 GND Ground power supply
4 RX UART RX signal
5 TX UART TX signal
6 RESET Flyport Modules Reset
[email protected] www.eikonsite.it tel +39 0721 0730896 Eikon srl, Rome (RM), Italy
compact USB Programmer
Technical Informations
Electrical USB
Power supply 5V from USB Cable USB 2.0 Full speed compatible
Onboard LEDs for TX and RX visual feedback
Mechanical
Operating Temperature -20..+85°C
Dimensions 51*27.5mm
Mechanical info
powered by technology
Rev.1 03/02/2012 P 3
[email protected] www.eikonsite.it tel +39 0721 0730896 Eikon srl, Rome (RM), Italy
Applications development
Please visit openPICUS project website www.openpicus.com to download the IDE, a
getting started guide and some apps examples and libraries.
The suggested starter kit is composed by: • miniUSB PROGRAMMER (to download firmware) Code.015371
• Proto NEST Code.015376 • Flyport Wi-Fi module Code.015350 or Code.015353
• Flyport Ethernet module Code.015356 or Code.015357
Each FlyPort Module has a serial bootloader onboard.
Eikon srl
Via Giacomo Peroni 442
00131 Rome (RM) Italy
Tel +39 06 92916378 Fax +39 0721 054588
Web www.eikonsite.it Email [email protected]
Partner
Buy online from www.eikonsite.it or contact your local reseller.
miniUSB PROGRAMMER
Product Code 015371
ORDERING INFORMATION
compact USB Programmer