Download - Non-Standard Items
Non-Standard Items
2012
Besides the standard product range, Hafner offers a wide range of non-standard items.
Table of Contents:
Page Description
1 4/3-way manually actuated valve for panel mountingBA 430 301
2 Manually actuated valve with electrical switchBAE 311 301
3 Lever actuated valves with safety functionHVZ 311 801, HVR 320 801 Z, HVZ(N) 511 801, HVR(N) 520 801 Z, HVZ 531 801
4 Lever actuated valve with locking capabilityHVR 520 701 L
5 Bleed valvesP 524 404, P 524 501, P 524 502 R on RP 5 564 S, P 524 502 R on RP 5 564
6 Pneumatically actuated valve with adjustable pneumatic pressure switchP 311 501 SR
7 Direct operated valve for vacuum use MSV 311 030
8 2-positon valve, actuated pneumatically and with a solenoidMHP 520 _ _ _
9 Solenoid valves which can be actuated either pneumatically or with the solenoidMH 520 _ _ _ VAVA
10 Choice of different manual overridesMH, MF, MD, MDH
11 Quick-exhaust valvesSE 501, SE 801, SE 8101, SE 121
12 Pressure applied safety valveDSV
Accessories for smart valve-automation
13 Pressure applied safety valve with Namur-InterfaceDSVN
14 Block and vent valveBHN 601
15 Lever actuated valve with safety function with Namur-InterfaceHVRZN 731 701, HVRZN 731 702
16 Short circuit valvesPN 411 701, P 411 121
17 Air recirculation blockUB 701
18 Quick-exhaust-block with non-return-functionSENR-20
19 Valve-block to control an automated process-valve with inflatable sealCBN 700
4/3-way manually actuated valve for panel mounting
BA 430 301 4/3-way spool valve for panel mounting.
If pressure is applied to port 1 the valve is normally exhausted.
If pressure is applied to port 3 the valve is normally pressurized.
Equipped with actuator BA 334 01.
BA 430 301
BA 430 301
BA 334 01
Type Actuation Port size Air flow Operating press. Actuating force Weight
BA 430 301 - G 1/8" 280 l/min 0 - 10 bar 14 N 0,110 kg
BA 334 01 Rotary lever long - - - 42 N/cm 0,021 kg
page 1
BAE 311 301
The BAE 311 301 is a 3/2-way spool valve ported G1/8” that can either be used normally closed (pressure at port 1) or normally open (pressure at port 3).
All the actuation-elements displayed on page 2.2.3 of valve-catalogue edition 2010 can be combined with the valve.
The electrical switch can be used up to 6 A / 125 VAC. Switch can be connected in two ways either normally open or normally closed.
The electrical switch can also be attached to BA 311 201, BA 511 201 and BA 511 301
BAE 311 301
BAE 311 301
Type Port size Air flow Operating press. Actuating force Weight
BAE 311 301 G 1/8" 280 l/min 0 - 10 bar 17 N 0,08 kg
page 2
G 1/4” lever actuated valves with safety function
HVZ 311 801/HVR 320 801 Z
HVR 320 801 Z
HVZ 511 801HVZN 511 801
HVZ 531 801
HVZ 311 801
HVR 520 801 ZHVRN 520 801 Z
Series of G 1/4" lever actuated valves. Valve-type Z offers a safety index.
In the position indicated II valve can only be switched by thoroughly pulling the lever.
The Air flow is 1500 l/min and the Actuating force is about 25 N.
HVZ 511 801/HVR 520 801 Z HVZN 511 801/HVRN 520 801 Z HVZ 531 801
Type Port size 2 + 4 Function Weight
HVZ 311 801 G 1/4" spring return 0,46 kg
HVR 320 801 Z G 1/4" indexed 0,46 kg
HVZ 511 801 G 1/4" spring return 0,55 kg
HVR 520 801 Z G 1/4" indexed 0,55 kg
HVZN 511 801 Namur spring return 0,55 kg
HVRN 520 801 Z Namur indexed 0,55 kg
HVZ 531 801 G 1/4" nc. spring return 0,55 kg
page 3
Hand-Lever Valve with Locking Capability
HVR 520 701 L
HVR 520 701 L
Type Function Port size Air flow Operating press. Actuating force Weight
HVR 520 701 L Indexed G 1/4“ 1250 l/min 1 – 10 bar 20 N 0,24 kg
Lever actuated 5/2-way spool valve, indexed.
The user can put a padlock in the drilling of the extended spool and thereby lock the valve.
The lever is sealed against the valve by using a metal ball.
Exhaust can be throttled.
page 4
Bleed valvesP 524 404 P 524 501 P 524 502 R
P 524 501
Pressure applied to port 1 is internally feed to both ends of the spool. Not to switch the valve ports 12 and 14 have to be closed. When 12 or 14 is exhausted, the valve switches.Air is constantly streaming out of the switching port as long as exhaust is allowed.
Advantage: Solution safer on tubing as actuation elements need no air-supply.
Notification: Please take national safety regulations into consideration.
For the valve P 524 502 R we offer two different kind of plates.
Type Port size Air flow Operating press. Weight
P 524 404 Ø 4 mm, plate 450 l/min 2,5 - 10 bar 0,080 kg
P 524 502 R Ø 5 mm, plate 650 l/min 2 - 10 bar 0,200 kg
P 524 501 G 1/8" 650 l/min 2 - 10 bar 0,170 kg
P 524 404
P 524 502 R on RP 5 564P 524 502 R on RP 5 564 S
Type Ports 1,2,4 Ports 5,3 Ports 12,14
RP 564 pif 6 mm G 1/8" pif 4 mm
RP 564 S pif 6 mm G 1/8" G 1/8"
page 5
Adjustable pneumatic pressure switch
P 311 501 SR pneumatically actuated 3/2-way valve G1/8” with mechanical spring return. Valve can be used normally closed (pressure at port 1) and normally open (pressure at port 3).
Valve can be used as an adjustable pneumatic pressure switch. By turning the hand-wheel the required minimum actuation pressure can be set between 3 and 6 bar. Adjustment is not independent from operation pressure.
Maximum actuation pressure is 10 bar.
P 311 501 SR
Type Port size Air flow Operating press.Regulation range act. press. Max. act. press. Weight
P 311 501 SR G 1/8" 650 l/min 2 - 10 bar 3 - 6 bar 10 bar 0,16 kg
P 311 501 SR
page 6
MSV 311 030
MSV 311 030 directly operated 3/2-way valve for vacuum use, orifice size 3 mm.
MSV 311 030
MSV 311 030
Available with solenoid operators: 230V/50Hz, 110V/50Hz, 24V/50Hz
Type Port size Air flow Operating press. Power consumption Weight
MSV 311 030 G 1/8" 250 l/min 0 - -0,9 bar 3 W = / 5 VA ~ 0,14 kg
page 7
Valve is also available with external pilot-feed. If requested please order MEHP 520 …
Available with solenoid operators: 230V/50Hz, 110V/50Hz, 24V/50Hz, 48V=, 24V=, 12V=
MHP 520 _ _ _
MHP 520 2-position valve, actuated from one side pneumatically, from the other side with a solenoid.
MHP 520 501 MHP 520 701 MHP 520 121
MHP 520 501
MHP 520 701
MHP 520 121
Valves are generally equipped with manual override. If requested without manual override please order M 520 …
Type Port size Air flow Operating press. Actuating press. Weight
MHP 520 501 G 1/8" 650 l/min 2 - 10 bar 2,5 - 10 bar 0,27 kg
MHP 520 701 G 1/4" 1250 l/min 2 - 10 bar 2,5 - 10 bar 0,30 kg
MHP 520 121 G 1/2" 3000 l/min 1 - 10 bar 2,5 - 10 bar 0,78 kg
page 8
MH 520 501 VAVA
5/2-way double solenoid valve that can either be actuated pneumatically or with the solenoid.
This kind of actuation can be assembled to any solenoid valve of the 501 and 701 series, single or double solenoids possible.
Available with solenoid operators: 230V/50Hz, 110V/50Hz, 24V/50Hz, 48V=, 24V=, 12V=
Valves are generally quipped with manual override.
Connectors as shown on the photo are included.
MH 520 501 VAVA
MH 520 501 VAVA
Type Port size 1-5 Port size 12 + 14 Air flowOperating press.
Actuating press. Weight
MH 520 501 VAVA G 1/8" M5 650 l/min 2 - 10 bar 2,5 - 10 bar 0,44 kg
Sample product:
page 9
Choice of different manual overrides
Hafner is offering the valves of the 16 mm as well as 22 mm series with different manual overrides.
Basically the valves of our 22 mm series are equipped with a resting manual override, turn by screw-driver to operate.
Type: MH
The valves of the 22 mm series can also be equipped with a true manual override, turn by hand to operate.
Type: MF
Basically the valves of our 16 mm series are equipped with a momentary manual override, push to operate.
Type: MD
The valves of the 22 mm series can also be equipped with this kind of override.
The valves of the 16 mm and 22 mm series can also be equipped with a combined manual override to push plus resting by turning.
Type: MDH
MDH as in-line versionMDH on valve terminal
The valves of the 16 mm as well as 22 mm series can also be delivered without any manual override, e.g. due to safety regulations!
page 10
Quick-Exhaust Valves
Quick-exhaust valve series which can also be used as non-return valve.
Non-return valve: Please close port R. Open from P to A, closed from A to P.
Temperature range: -20° C to +80° C
Stainless steel version as well as low temperature version available on request.
SE 501SE 801SE 8101SE 121
SE 501
SE 801
SE 8101 SE 121
Type Port size A + P Port size R Air flow from A to R Air flow from P to A Operating press. Weight
SE 501 G 1/8" G 1/8" 564 l/min 300 l/min 0,3 - 10 bar 0,055 kg
SE 801 G 1/4" G 1/4" 1188 l/min 660 l/min 0,2 - 10 bar 0,18 kg
SE 8101 G 1/4" G 3/8" 1188 l/min 660 l/min 0,2 - 10 bar 0,18 kg
SE 121 G 1/2" G 1/2" 3600 l/min 1590 l/min 0,5 - 10 bar 0,26 kg
page 11
Pressure Applied Safety Valve
Pressure Applied Safety Valve to hold a double acting actuator – especially a gripper - at the current position in case of cut-off of pressure supply.
The valve is consisting of two non-return valves which will be unlocked by pressurising port P1 or P2.
Installation between pilot valve and actuator.
This valve is often used for gripper-applications. In case of cut-off of pressure supply, the gripper will hold the item.
Inner parts are made of brass and POM, seals are made of NBR.
Useable in a temperature range of -10° C to +70° C.
Special version where the holding-function can be opened manually is available on request.
DSV-1/8
DSV-1/8
Type Port size Air flow P to A/B Air flow A/B to P Operating press. Weight
DSV-1/8 G 1/8" 230 l/min 360 l/min 1 - 10 bar 0,10 kg
page 12
Pressure Applied Safety Valve
Pressure Applied Safety Valve to hold a double acting actuator at the current position in case ofcut-off of pressure supply.
Interface according to 1/4” Namur standard.
A special plate with G 1/4” BSP threads for remote piloting can be supplied on request.
The valve is consisting of two non-return valves which will be unlocked by pressurising port P1 or P2.
Installation between pilot valve and actuator.
Inner parts are made from brass and POM, seals are made from NBR.
Temperature range: -10° C to +70° C.
DSVN-5
DSVN-5
Type Namur Air flow P to A/B Air flow A/B to P Operating press. Weight
DSVN-5 1/4“ 230 l/min 360 l/min 1 - 10 bar 0,10 kg
page 13
Block and Vent Valve
The BHN 601 is made for blocking the air supply from the pilot valve to the actuator and venting at the same time both actuator chambers.
This valve is often been used where on site servicing of the armature is required and during service the actuator needs to be isolated from the control system.
Valve can be used on single acting and double acting actuators.
Interface according to 1/4” Namur standard.
A special plate with G 1/4” BSP threads for remote piloting can be supplied on request.
Operation:
O-Position:The valve feeds the supply air from the pilot valve through to the actuator.
M-Position:Air supply from the pilot valve to the actuator is cut-off and the actuator chambers can exhaust through to the ports R of the block and vent valve.
The valve offers a locking function in the O-position (lock not included).
BHN 601
BHN 601
Type Namur Port size R Air flow Operating press. Actuating force
BHN 601 1/4“ G 1/4" 900 l/min 1 - 10 bar 18 N
page 14
Namur Hand-Lever Valve with Safety Function
Hand-lever valve for direct assemblage to an actuator with 1/4” Namur interface.
Offers the possibility to override a positioner.
Version 731 701:Normally the lever is in the middle position and the actuator is piloted by the positioner. In this position the valve just feeds the signals from the positioner through to the Namur-ports.In case of electric / electronic problems the actuator can be opened or closed manually.
Advantages of version 701:Only one lever to manipulate (not 2 actuation elements).Overrides in manual mode the positioner, manual mode and automatic mode truly independent.
Version 731 702:If the knob is pushed, air flows from the positioner from Y to 4 and from X to 2.If the knob is pulled the positioner is shut-off. The lever valve is to be used as a centre closed 5/3-way valve, actuator can be fully opened, fully closed or put into intermediate position.
Advantage of version 702:Offers in manual mode a centre closed 5/3-way-valve. Version 701 is in manual mode a 5/2-way.
HVRZN 731 701
HVRZN 731 701
Type Function Port size Air flow Operating press. Actuating force Weight
HVRZN 731 701 5/2-way indexed G 1/4" 1250 l/min 1 - 10 bar ~ 25 N 0,53 kg
HVRZN 731 702 5/3-way indexed G 1/4" 1250 l/min 1 - 10 bar ~ 25 N 0,45 kg
HVRZN 731 702
HVRZN 731 702
Safety lever:In order to avoid unintended manual actuation the lever of both versions has to be pulled thoroughly for being manipulated out of central position.
page 15
Short Circuit Valves
The PN 411 701 is made for direct assemblage to an actuator with 1/4” Namurinterface. It offers a 1/4” Namurinterface towards the pilot-valve (use as sandwich plate) as well as ports G 1/4” (piped application).
The P 411 121 is an in-line-version for high-flow-application, ported G1/2”.
Function: As long as a pneumatic signal is applied, the valve forwards the signals applied to 2 an 4 through to X and Y. When no pneumatic signal is applied the ports 2 and 4 are shortcut.
Typical application: Automated process-valve equipped with a gear-box for manual actuation. In case of a failure, the valve ensures, that the user doesn't have to close the process valve against the force of the air, which is usually trapped in the actuator.
PN 411 701
PN 411 701
P 411 121
Type Port size Air flow Operating press. Actuating press. Weight
PN 411 701 G 1/4" 1250 l/min 1,5 - 10 bar 3 - 10 bar 0,20 kg
P 411 121 G 1/2" 3000 l/min 1 - 10 bar 3 - 10 bar 0,63 kg
P 411 121
page 16
Air-Recirculation Block
UB 701
UB 701
The Hafner Namur air-recirculation block absolutely guarantees, that only exhausting air from the actuation-side is going into the spring chamber and for sure no ambient atmosphere.
Especially been used for remote piloting (e.g. a valve which is assembled in a control cabinet).
Valve is designed for spring return pneumatic actuators with an 1/4” Namur-Interface.
Standard with a G 1/4“ pilot port.
Stainless steel version is available on request.
Function:
Actuator
Air-recirculation block
3/2-way valve
Type Namur Port size Air flow Operating press.
UB 701 1/4“ G 1/4" 1250 l/min 1 - 10 bar
page 17
Quick-Exhaust-Block with Non-Return-Function
The valve is designed for spring-return actuators with G 1/4” Namur-interface.
The block assures that only processed air that has been used to open the actuator is used in the spring-chamber. Excess air is released very fast by the quick-exhaust valve, exhaust-port G 1/2”, orifice 10 mm.
Two exhaust-ports “R” allow that the product can always be assembled so the silencer faces downwards.
The non-return valve makes absolutely sure that no ambient atmosphere can be sucked into the actuator.
Any 3/2-way valve can be used as pilot valve. The interface towards the pilot valve is G 1/4”.
If requested the plate for the pilot-valve-interface can be exchanged, e.g. by a Namur-interface plate.
Materials used: Anodised aluminium, brass, NBR.
SENR-20
SENR-20
This product contains a quick-exhaust- and a non-return valve. Exhaust air re-circulation from the actuation-chamber to the spring-chamber is absolutely guaranteed.
page 18
CBN 700 for control of automated process-valve with inflatable seal
CBN 700
Type Interfaces Port size P Air flow act. Air flow seal Temperature
CBN 700 1/4“ Namur G 1/8" 900 l/min 400 l/min -40°C … +50°C
Controlblock for double acting actuators with 1/4“ Namurinterface to be used on process-valves with inflatable seal.
The control-block receives it‘s signals to open and close from a standard 5/2-way Namurvalve. The block is to be put between the actuator and the Namur-valve (flange-version). The closing-signal is fed through to the actuator, the seal is inflated with time-delay. When the process-valves is to be closed first the seal is deflated, with time-delay the actuator opens the process-valve. Opening- and closing-time-delay can be adjusted independently but they are related to the operating pressure. At 6 bar time-delay can be adjusted between 0 and 2 seconds.
CBN 700
page 19
Hafner-Pneumatik Krämer KGStammheimer Straße 10
D-70806 Kornwestheim
Phone +49 – 7154 – 17 85 89 0Fax +49 – 7154 – 17 85 89 28
Hafner Pneumatika Kft.Püski út 3.
H-9228 Halászi
Phone +36 – 96 – 57 30 12Fax +36 – 96 – 21 06 15
Sta
tus:
11/
11