INNOfill I n n o v a t i v e R F F i l l e r I n j e c t i o n S y s t e m
CONTENTS
-. About RF Filler ? -. Basic theory of RF Filler -. Introduction of INNOfill -. Clinical results of INNOfill -. Comparison with others
About RF Filler……
What i s RF Filler ? It is combined technology of Radiofrequency wave and Filler injections in one
platform, which is an innovative minimally invasive technique for facial rejuvenation.
Why RF Filler ? INNOfill is essentially for facial rejuvenation and for the treatment of scars, stretch
marks, and wrinkles combinedly working by RF thermal energy and hyaluronic acid
filler.
How does it work ? Monopolar RF treatment has been demonstrated to induce a wound healing response
with increased collagen expression and dermal remodeling results in gradual
improvement over several months and can be long-lasting, while fillers often result in
immediate clinical improvements that are usually temporary.
Therefore, a filling/lifting/smoothing effect can be obtained, concerning the effects of
aging, and a therapeutic effect occurs on acne scars and striae as well as most of
facial rejuvenation.
RF Treatment Filler Treatment INNOfill Treatment
Skin Rejuvenation ★★★★★ ★★★★★
Skin Elasticity ★★★★ ★★ ★★★★★
Wrinkle Reduction ★★ ★★★★ ★★★★★
Volume Up ★ ★★★★ ★★★★★
Painful ★★★★ ★★ ★★
Duration 1 year 0.6 – 1 year 1 – 2 years
About RF Filler……
Comparison between RF Trt / Filler Trt. / RF Filler Trt.
Applications Frequency Power (watt) Needle
Light wrinkles & scars 2MHz 3 - 4 30G
Mild wrinkles & scars 1MHz 6 - 7 26G
Deep wrinkles & scars Incl. lifting effects
1MHz 15 (Max) 21G
General Parameter of INNOfill
Basic theory of RF Filler……
INNOfill® consists mainly of following two effective performances.
A conducted RF needle, specially formulated to apply radiofrequency is injected into skin and forms ‘autologous containment capsule’ in order to hold filler longer than ever since the bio-degradation goes slowly.
And, Monopolar RF treatment stimulates dermis and helps re-modeling collagen immediately and gradually in long-term.
Soft-tissue filler augmentation is a treatment modality widely used for aesthetic improvement of deep facial lines and wrinkles. However, it is not well accepted for the patients who want longer filler duration. Soft-tissue augmentation and monopolar RF treatment have the potential to restore tissue volume and improve facial laxity.
Monopolar RF mode
Filler Injection
RF Filler
A glance at INNOfill……
‘A’
‘B’
‘C’ ‘D’
‘E’
‘F’
Description
‘A’
RF filler is for performing both RF emission
and filler injection at same time.
RF only is for performing RF emission
only using dedicated needle.
‘B’ RF frequency will be selected either 1MHz or,
2MHz depending on procedures.
‘C’
It indicates the status of power and activation
of procedures.
‘D’
Control button for adjusting each parameters
and values by push.
‘E’
It shows time that is running currently.
‘F’
It controls power level from 1 to 9 levels.
How to set INNOfill……
Detachable RF connector
Main Unit
Foot Pedal
Ground Patch
Y Connector
RF Needle
Syringe
Special coated RF filler needle
How does INNOfill works….. Injecting RF needle into skin using linear retrograde
technique with circular movement.
Applying RF energy from the end of needle.
★ Formation of ‘autologous containment capsule’
★ Re-modeling collagen
To retrogress needle slowly inserting filler with one
of following injection technique according to target.
-. Linear / Serial puncture / Cross-hatching / Fan
★ Soft-tissue augmentation
By using these two procedures,
a filling/lifting/smoothing effect is therefore obtained,
concerning the effects of aging, and a therapeutic
effect occurs on acne scars and striae.
Advantages of INNOfill …..
Lifting by RF energy and Volume-up by filler can be done in one platform.
Long lasting efficacy thanks to RF + Filler technique.
Non-invasive procedure thus the lesser down-time.
A minimal side-effect by using well known accepted filler procedure.
Available customized procedure depend on area to be treated.
Expected lifting efficacy additionally by using RF + Filler mode.
Reduction of usage of filler because of ‘Autologous Containment Capsule’ nearly 30%.
Clinical Result
Before Treatment (Day 0) Day 8 Week 4
Week 8 Week 12
RF Filler
Filler only
Case 1 : 35 yrs male
Before Treatment (Day 0) Day 8 Week 4
Week 8 Week 12
RF Filler
Filler only
Case 2 : 31 yrs male
Grade 1 Grade 2 Grade 3
Grade 4 Grade 5
Grade 1 (absent): no visible nasolabial fold; continuous skin line
Grade 2 (mild): shallow but visible nasolabial fold with a slight indentation; minor facial feature;
implant is expected to produce a slight improvement in appearance
Grade 3 (moderate): moderately deep nasolabial fold; clear facial feature visible at normal appearance but not when
stretched; excellent correction is expected from injectable implant
Grade 4 (severe): very long and deep nasolabial fold; prominent facial feature; <2 mm visible fold when stretched;
significant improvement is expected from injectable implant
Grade 5 (extreme): extremely deep and long nasolabial fold, detrimental to facial appearance;2~4mm visivle V-shaped
fold when stretched; unlikely to have satisfactory correction with injectable alone
WSRS – Wrinkle Severity Rating Scale
Clinical result of INNOfill.....
Conclusion: Monitoring result in 3 months, it is apparently observed a continuity of volume-up through RF filler treatments compared to the treatment done by only filler procedure.
Objective: This clinical test is to verify a continuity and a visible volume up of filler stimulated by RF emission
0.0
0.5
1.0
1.5
2.0
Day 8 Week 4 Week 8 Week 12
고주파Tunneling & 필러
필러 only
-1.0
-0.5
0.0
0.5
1.0
1.5
2.0
Day 8 Week 4 Week 8 Week 12
고주파Tunneling & 필러
필러 only
Case 1 Case 2
* P-value < 0.05 vs filler only
Implication: Comparing to WSRS based on resting phase, it is scored delta value before and after of filler trt. (reviewer n=8) : deviation = SE (delta) Marked * only on p-value < 0.05 Methods: RF parameter: frequency-medium, mode-manual, power-15 watt Injected filler 0.5ml (Glytone 3) into nasolabial fold 4 times and forehead fold 2 times On the view of observer, RF Filler injected on left side and only filler on right side n= 3 Macrography on before and after of filler treatment completion of test with 3 months monitoring
Comparison INNOfill and Spherofill…..
SPHEROFILL
INNOf i l l
ITEMS SPHEROFILL (Made in Italy, Promo-Italia)
INNOFILL (Made in Korea, Amore-pacific)
RF Output Voltage (V) Max. 20V (Peak-Peak) Max. 30V (Peak-Peak)
RF Output Power (W) Max. 9W (Actual output : approx. 1W) Max. 23W (Actual output : approx. 3W)
RF Frequency 1134KHz, 1769KHz Sine Wave 1MHz, 2MHz Sine Wave
Display Type LCD type FND type
Power Input 100~240V, 50/60Hz 100~240V, 50/60Hz
Retail Price Around USD27,000 USD10,000
Comparison INNOfill and Spherofill…..
ITEMS SPHEROFILL (Made in Italy, Promo-Italia)
INNOFILL (Made in Korea, Amore-pacific)
Needle & Cables Fixed type Detachable (Re-usable)
Coating Needle Teflon (Toxic ?) Silicone (Non toxic)
Friction of needling Average but PAINFUL Superior and NO-PAIN
Grounding patch N/A AMBU Patch
Needles 30G / 27G / 26G / 25G / 22G 30G / 27G / 21G
Detachable Fixed type
Comparison INNOfill and Spherofill…..
Difficult to read parameters Easy to read parameters
LCD Type FND Type
Hard to set all buttons (double touch)
Convenient to set buttons ( one touch)
Thank you !
