Download - Dusk Round the Year Quilt - Block 1 DAHLIA Instructions · Dusk Round the Year Quilt - Block 1 DAHLIA Instructions Block size: 18” square with 15” inset circle This traditional

Dusk Round the Year Quilt - Block 1 DAHLIA Instructions

www.betukbandi.wordpress.com

Block size: 18” square with 15” inset circle

This traditional “DAHLIA” block is the first in the Round the Year Quilt. This block is paper foundation pieced before being assembled. We are

chain piecing strips to construct the block.

Fabric Requirement – given for strip piecing technique. You need more fabric ( an extra strip of each of fabric 2,3, 4,5 and 7 ) if you

wish to piece the block in the regular way.

Colour Code Quantity Blue 2

2 strips 2.5” x 20”

3

2 strips 2.5” x 20”

4

2 strips 2.5” x 20”

7

1 strip 3.5” x 20”

Yellow 5 1 strip 3.5” x20 1 strip 2” x 20” 2 squares 3.5” x 3.5”

Orange 6

1 strip 2” x 20” 2 squares 3.5” x 3.5”

Grey (for square 1

18.5” square

1. Take print outs of the Template.pdf file at 100% size. You have the following templates:

- 16 arc templates numbered A to P for piecing the outer circle (ring).

- 2 templates Q and R for the inner circle

- Template S in 2 pieces S1 and S2 for one quarter of the outside square.

2. The Master template on the next page of this file shows how the paper pieced sub-blocks shall be assembled. (You can also use it to try

out your own colour schemes; use colour pencils! ) I suggest you print Pages 1 and 2 of this file for ready reference.

Madhu

Typewritten Text

( Printer settings in Portrait mode)

Madhu

Typewritten Text

Madhu

Typewritten Text

Madhu

Typewritten Text

Madhu

Typewritten Text

OR

Madhu

Typewritten Text

10" x 25"

Round the Year Dusk Round the Year - Block 1 DAHLIA

Instructions

2 www.betukbandi.wordpress.com

1. Piece arc templates A to H

2. Piece arc templates I to P

3. Piece the centre halves Q and R.

4. Moving anti-clockwise from 3 o’clock, join the arcs in adjoining pairs as follows-

H to P, A to I, B to J and so on

5. Join HP to AI and BJ to CK. Next join HPAI to BJCK to get the top half of the flower

6. Similarly, join adjoining pairs to get the bottom half of the flower DLEMFNGO

7. Join the centre top Q to HPAIBJCK and similarly construct the lower half of the Dahlia.

8. Glue together the two parts of template S along the marked edge. Use the following diagram to cut 4 of these – S, T, U and V from

the background fabric.

9. Join S and T to make the top half and U and V to make the bottom half

10. Set the circle halves into the background fabric.

11. Join the halves to make the square block!

I plan to set the circles on to the background fabric only once all of them are ready.

Madhu

Typewritten Text

Skip this step if using the 18.5" square for background - it is presumed you will be appliquing the circle to the square. If using 10" x 25" strip, you need to use the template S .

Madhu

Typewritten Text

Madhu

Typewritten Text

Madhu

Typewritten Text

Madhu

Typewritten Text

Madhu

Typewritten Text

Madhu

Typewritten Text

Madhu

Typewritten Text

Madhu

Typewritten Text


Instructions


Piecing Instructions

As I mentioned, we use the strip foundation piecing technique to (chain)piece the block.

1. Cut out the strips as recommended. Colour code the strips – mark them with a post-it note! Whenever I

don’t do that, I end up using the wrong fabric. For cutting the strips, it is highly recommended ( in fact,

essential!) that you pre-starch the fabric. If you do not have access to a readymade spray starch, a good

home made option is mixing a liquid stiffener like Revive ( 2capfuls in 100ml) with water in a spray bottle.

2. Cut out all the templates roughly – accuracy not required at this stage.


Instructions


3. Make 4 piles : A to H, I to P, Q to R, and S1-S2

4. We first piece A to H. (These are pieced from the centre outwards to the circumference.)

- Line up the strips top to bottom needed for these in order.

- Yellow Colour code 5- 2” strip

- Blue Code 4 – 2.5” strip

- Blue code 3 – 2.5” strip

- Blue Code 2- 2.5” strip

- Yellow Code 5 – 3.5” strip


Instructions


5. Lower the stitch length ( 1.5 should be fine)

6. Place the pile of templates A to H close to hand near the sewing machine. Line up the first 2 strips, right

sides together, left edges aligned and strip 1 ( yellow 2”) on top, under the raised presser foot – see the

photo.


Instructions


7. Slide the paper template A over the fabric, aligning the seam marker line between A1 and A2 approximately

( at least) ¼” from left edge. ( Accurate ¼” seam not necessary, you can err towards a bigger seam!) Bring

down the presser foot and sew accurately on line. Do not cut thread, or remove the fabric/ paper.

8. Now line up Template B under Template A, making sure that the templates do not overlap. Sew on the line

between B1 and B2. Line up Template C next...and so on...ensuring you leave about 1/8” between the

paper templates.


Instructions


9. At the end of this exercise, you have 8 templates A to H lined up and sewn to Strips 1 and 2, like this pic.

Carry them to the ironing board.

10. Flip over ( to the unprinted paper side) and press over seam to set it. Open the blue strip and press again.

Note the distance between the paper templates in the pic – it is very important that the templates not be

too close to each other.


Instructions


11. Flip over to the printed paper side ...

. . ...and cut the strips carefully, along the paper template edges, to separate the templates.

This is how your templates should look now...


Instructions


12. Now to the cutting mat to trim down your seam to ¼”.

Fold back the paper to reveal the seam and using your ruler and rotary cutter, trim it down to ¼”.

If you are not a perfection freak, it is absolutely okay to just trim the seam with your scissors to

approximately ¼”.

Now head back to the sewing machine!


Instructions


13. We now attach the 3rd strip to these templates. (Basically, we shall be doing the same thing that we did

when we attached Strip 1 to Strip 2. ) So here goes!

- Queue up your templates again A to H.

- Place Strip 3 ( right side up) under A2, aligning the edges to the left ¼” beyond the seam line between

A2 and A3.

- Sew on the seamline. Again, do not remove from under machine.

- Chain piece B, C, D...H as you did for strips 1 and 2. You end up with this...

...which you carry to the ironing table!


Instructions


Iron , cut to separate the templates and trim the seams to ¼”


Instructions


14. Attach strip 4 , iron, cut, trim seams.

15. The final yellow strip at the outer edge is 3.5” wide. This is attached in the same way...

...cut apart, seams trimmed. Now trim the outer edges roughly.

Your templates A to H are pieced!


Instructions



Instructions


16. Next step will be piecing templates I to P.

Here, we start piecing from the outer edge of the circle and go towards the centre.

Get your fabric strips together and label them, in the following order –

Blue Code 7 -3.5” (I have used this delicious mottled fabric instead of the deep blue shown in the pattern)

Blue Code 4 -2.5”

Blue Code 3 – 2.5”

Blue Code 2 – 2.5”

Orange Code 6 – 2”

17. Now to begin piecing the second lot! Just to remind you, as you begin, the order top to bottom is -

1. Paper template I (printed side up)

2. Strip 1 ( Code 7) right side down under I1

3. Strip 2 (Code 4) right side up

The edges of Strips 1 and 2 are aligned approximately ¼” beyond the seam line 1. Sew on Seam

line 1. Without taking fabric and template off the machine, chain piece all the templates as shown in pic

above. Follow instructions above to piece the templates, ironing, cutting, trimming seams at each stage.

Till here we are, almost at the end of our piecing !


Instructions


.

18. Attach the last strip, iron, and cut apart the templates. Trim seams.

19. Trim the fabric on the edges of the templates roughly. Refer to the Master Template and lay out your

pieced templates (alternating the two lots) and admire them!


Instructions


20. Piecing the centre.

Method 1 – Cut the 2 orange and 2 yellow squares diagonally. Piece using the templates Q and R.

In my original pattern, I had pieced the centre with 16 segments , but have revised it to 8 segments, as the

16- spoked centre became too bulky to handle.


Instructions


Stand back and admire your pieced templates...

..till we are ready to assemble these together in a week’s time on 22nd July.

That was simple, was it not? See, I told you so! But, do not hesitate to ask me if you get stuck at any stage...


Instructions


TROUBLESHOOTING!!!

Once in a while, you may need to rip a seam on the template, like when you have veered off the

seam line.

Or you may have a pieced template which looks like the centre blue piece in the picture on the

left, where the seam allowance at the edge of the template is less than ¼”. Marginally less shall

not matter, but if you are more than a little way off, you may need to do re-do the seam.

Rip the seam, but you may end up tearing the paper template too, since the stitch length is

minimised to 1.5. Some paper tape is best for carrying out repairs in such cases.

Download - Dusk Round the Year Quilt - Block 1 DAHLIA Instructions · Dusk Round the Year Quilt - Block 1 DAHLIA Instructions Block size: 18” square with 15” inset circle This traditional

Top Related