Download - Contents of volume 75 (1996)
International Journal of Fracture
CONTENTS OF VOLUME 75 (1996)
381
Vol. 75, No. 1, 1996
Foreword
COD of off-centred cracks in pipes under bending load: a geometrical solution N. BONORA
Variation of stress intensity factor and crack opening displacement of semi-elliptical surface crack
N.-A. NODA and S. MIYOSHI
Growth behavior of internal delaminations in composite beam/plates under compression: effect of the end conditions
G.A. KARDOMATEAS and A.A. PELEGRI
Analysis of direct current potential field around multiple random cracks
N. TADA, Y. HAYASHI, T. KITAMURA and R. OHTANI
Order of the singular stress fields of through- thickness cracks A.Y.T. LEUNG and R.K.L. SU
1-18
19-48
49-67
69-84
85-93
Vol. 75, No. 2, 1996
Analysis of stable crack growth in brittle materials. Part I: A process zone model D.K.M. SHUM
Analysis of stable crack growth in brittle materials. Part II: A bridge zone model D.K.M. SHUM
Finite-element analysis of selectively SiC fibre- reinforced titanium composites
N. WANG, D.C. CARDONA and P. BOWEN
Comments on mixed-mode fracture in adhesive joints
R. DUER, D. KATEVATIS A.J. KINLOCH and J.G. WILLIAMS
Near-tip fields and intensity factors for interfacial cracks in dissimilar anisotropic piezoelectric media H.G. BEOM and S.N. ATLURI
95-114
115-136
137-155
157-162
163-183
382 International Journal of Fracture
VoL 75, No. 3, 1996
Mode II fracture testing method for highly orthotropic materials like wood
S. XU, H.W. REINHARDT and M. GAPPOEV 185-214
Edge delamination of residually stressed thin films: viscoelastic effects A. KRISHNA 215-228
Antiplane interaction of an anisotropic elliptic inclusion with an arbitrarily oriented crack C.K. CHAO and T.F. CHIANG 229-245
Characterization of 2-dimensional crack propagation behavior by simulation and analysis
B.-N. KIM, S. WAKAYAMA and M. KAWAHARA 247-259
Dynamic stresses around two cracks placed symmetrically to a large crack S. ITOU 261-271
Size effect predictions by fracture models for a refractory ceramic
M.A.J. VAN GILS, L.J.M.G. DORTMANS, G. DE WITH, W.A.M. BREKELMANS and J.H.P. DE VREE 273-283
VoL 75, No. 4, 1996
Mode I fracture modeling of elastomer- toughened polymers
M. TOHDOH, S.K. CHATURVEDI and R.L. SIERAKOWSKI 285-306
Plastic zones in an orthotropic plate of finite width containing a Griffith crack
H.T. DANYLUK, B.M. SINGH andJ. VRBIK 307-322
The use of contstraint-modified failure assessment lines in failure assessment diagrams
B.A. BILBY, I.C. HOWARD and Z.H. LI 323-334
Bridge-toughening analysis of the penny crack in a fiber-reinforced composite with interfacial effect Z.J. WU and S.W. YU 335-346
Fracture resistance to the crack propagation in wood
S.E. STANZL-TSCHEGG, D.M. TAN and E.K. TSCHEGG 347-356
Logarithmic singular stress field in a semi- infinite plate consisting of two edge-bonded wedges subjected to surface tractions D.-H. CHEN 357-378
Author index 379