Download - Clean Air Engineering Product Catalog

2 0 1 5 c ata l o gcleanair.com

1.800.223.3977

Air Pollution Sampling Equipment For Environmental Professionals Worldwide

Terms & condiTionsPricesAll prices published by CleanAir may be changed at any time without notice. All prices quoted by CleanAir or CleanAir’s representatives are valid for thirty (30) days, unless otherwise stated in writing. All prices for the Products will be as specified by CleanAir or, if no price has been specified or quoted, will be CleanAir’s price in effect at the time of shipment. All prices are subject to adjustment on account of specifications, quantities, raw materials, cost of production, shipment arrangements or other terms or conditions which are not part of CleanAir’s original price quotation. The prices in the Domestic price list are for delivery in the USA. Orders for delivery to other countries will be based on Export price list.taxes and other chargesPrices for the Products exclude all sales, value added and other taxes and duties im-posed with respect to the sale, delivery, or use of any Products covered under this agreement. The amount of any present or future taxes and duties will be added to the purchase price and must be paid by Buyer. If Buyer claims any exemption, Buyer must provide a valid, signed certificate or letter of exemption for each respective jurisdiction.Payment termsTerms of payment are Net 30 days with established credit, or by Visa/Master Card at time of order. Invoices over 30 days past due are subject to a 1.5% finance charge per month.Shipments and DeliveryUnless otherwise instructed, shipments are made as soon as possible after receipt of order by the method of transportation, which in our judgment will be most satisfactory. Freight charges are prepaid and added to the invoice. The right is reserved to make partial shipments where delays beyond our control may delay a portion of the order. All domestic sales by CleanAir are F.O.B. CleanAir’s Facility of Shipment, as defined in the Uniform Commercial Code. All international sales by CleanAir are Free Carrier (FCA) CleanAir’ Facility of Shipment, as defined by INCOTERMS 2010.title and Risk of lossTitle to and risk of loss of all products shall pass to Buyer as soon as the products are delivered by CleanAir to the carrier. Each shipment date is approximate, and CleanAir shall not be responsible for any damages of any kind resulting from any delay in ship-ment or delivery of any products.Export RestrictionsBuyer acknowledges that each Product and any related software and technology, in-cluding technical information supplied by CleanAir or contained in documents (collec-tively “Items”), is subject to export controls of the U.S. government. The export controls may include, but are not limited to, those of the Export Administration Regulations of the U.S. Department of Commerce (the “EAR”), which may restrict or require licenses for the export of Items from the United States and their re-export from other countries. Buyer shall comply with the EAR and all other applicable laws, regulations, laws, trea-ties, and agreements relating to the export, re-export, and import of any Item. Buyer shall not, without first obtaining the required license to do so from the appropriate U.S. government agency; (i) export or re-export any Item, or (ii) export, re-export, distribute or supply any Item to any restricted or embargoed country or to a person or entity whose privilege to participate in exports has been denied or restricted by the U.S. government. Buyer shall, if requested by CleanAir, provide information on the end user and end use of any Item exported or to be exported by Buyer. Buyer shall cooperate fully with Clea-nAir in any official or unofficial audit or inspection related to applicable export or import control laws or regulations, and shall indemnify and hold CleanAir harmless from, or in connection with, any violation of this Section by Buyer or its employees, consultants, or agents.Design changesDesign changes are made from time to time. Some items may differ slightly from cata-log illustrations or descriptions. Changes are made in the interest of better performance and quicker delivery.Returned ItemsAuthorization must be obtained from CleanAir before returning any products. When requesting return authorization, please advise reason for return, date of purchase, Buyer’s P.O. number and CleanAir’s invoice number. All orders for special, custom, or non-stocked products are non-cancellable, non-returnable and non-reschedulable unless defective and only with a returned material authorization number which shall be issued at the CleanAir’s sole discretion. . All returns must be shipped freight prepaid at the Buyer’s expense.WarrantyClean Air Engineering warrants products to be free from defects and workmanship for a period of one year after delivery date. The sole and exclusive remedy for defective goods shall be repair or replacement of defective parts or payment price of the goods for which damages are claimed, at CleanAir’s option.

Returned ItemsAuthorization must be obtained from CleanAir before returning any products. When requesting return authorization, please advise reason for return, date of purchase, Buyer’s P.O. number and CleanAir’s invoice number. All orders for special, custom, or non-stocked products are non-cancellable, non-returnable and non-reschedulable unless defective and only with a returned material authorization number which shall be issued at the CleanAir’s sole discretion. . All returns must be shipped freight prepaid at the Buyer’s expense.WarrantyClean Air Engineering warrants products to be free from defects and workmanship for a period of one year after delivery date. The sole and exclusive remedy for defective goods shall be repair or replacement of defective parts or payment price of the goods for which damages are claimed, at CleanAir’s option.Intellectual PropertyBuyer acknowledges that CleanAir’s Products and all intellectual property associated with same, including but not limited to trade marks, service marks, patents, copyrights, software, design documents, and proprietary know-how and other attributes are the sole and exclusive intellectual property of CleanAir. No intellectual property rights transfer to Buyer as a result of CleanAir’s sale of its Products unless expressly agreed to in writing. The Buyer may not alter, modify, enhance, create derivative works, reverse engineer, de-compile, decrypt, or otherwise reduce the Products or Software without prior written consent of CleanAir. If software is purchased, Buyer is granted a nonexclusive royalty-free license to use the software in accordance with the accompanying Software License Agreement.limitation of liabilityIn no event, whether as a result of breach of contract or warranty, tort (including neg-ligence) or otherwise, shall CleanAir be liable for: (a) any consequential, incidental or exemplary damages, including, without limitation, any loss of profit or revenues, loss of use of any equipment, damage to other equipment, cost of substitute equipment or down-time costs; (b) any claims, demands or actions against Buyer by any third party; (c) any loss or claim arising out of the use of or related to the products or services; or (d) any unavailability of the product for use or any lost, damaged or corrupted data or software. CleanAir’s aggregate liability will be limited to the value of the goods provided in conjunction with Buyer’s purchase order. Buyer agrees to indemnify CleanAir from and against any and all third party claims which are brought against CleanAir resulting from Buyer’s direct or indirect use of any products purchased. The indemnity obligation shall be broadly construed, and shall include not only indemnification for any third party claims, but also for any and all attorneys’ fees, litigation costs and like expenses which CleanAir is forced to incur with respect to an indemnified obligation.commercial arbitrationAny disputes between Buyer and CleanAir regarding this order which cannot be settled amicably by the parties hereto shall be submitted to binding arbitration in accordance with the rules, practices, and procedures of the American Arbitration Association. Any arbitration proceeding shall take place at Chicago, Illinois. The prevailing party at arbi-tration shall be entitled to recover as a part of the arbitrator’s award all of its arbitration expenses, including, but not limited to, attorney fees, expert fees, travel costs, court re-porter fees, and the like. The laws of the State of Illinois will govern the interpretation and enforcement of this agreement. Notwithstanding the foregoing, CleanAir reserves the right to elect to commence general commercial litigation against Buyer for its failure to pay for products purchased in accordance with the terms described herein. The parties agree that Cook County, Illinois shall be the proper venue and jurisdiction for any such claims. The prevailing party in conjunction with such litigation shall be entitled to recover as a part of the final judgment all of its litigation expenses, including but not limited to attorneys fees, expert fees, trial costs, court reporter fees, and the like.generalIf any provision of these Terms and Conditions is held by any competent authority to be invalid or unenforceable in whole or in part the validity of the other provisions of these Terms and Conditions and the remainder of the provision in question shall not be affected thereby.Sole agreementCleanAir sells products only under the foregoing terms and conditions and will not be bound by terms or conditions stated by any purchaser in any offer, acceptance, or other contractual document. Placing an order or accepting delivery of products constitutes acceptance of these terms and conditions. No waiver, alteration or modification of any of the provisions hereof shall in any event be effective or binding upon CleanAir unless in writing and signed by a duly authorized employee of CleanAir.

CleanAir® ExpressA Division of CleanAir® Engineering

Phone: (800) 223-3977 Fax: (847) 991-8924Web site: www.cleanair.com

aIR PollutIon SamPlIng EquIPmEnt

cleanair® Engineering Headquarters500 West Wood StreetPalatine, Illinois 60067tel: 800-627-0033 847-991-3300Fax: 847-991-3385

cleanair® Engineering Express212 Woodwork lane

Palatine, Illinois 60067tel: 800-223-3977Fax: 847-991-8924

Online Store: www.store.cleanair.com

• calibration Services • technical Services• Engineering and custom Fabrication

Services• Repair Services

For Your convenience we accept:

cleanair advantageCleanAir Express aims to provide the highest quality air emissions sampling equipment in the world. We believe testing professionals should have the most innovative and reli-able instruments available helping to make their jobs safer, fun and financially reward-ing. We do this by constant improvement and applying over 40 years of air sampling experience to our equipment designs.



table of contentssource sampling equipmenT


source sampling equipmenT conTinuedPage

method 2 ................................................................ 1-3 Air Velocity Kit ..................................................... 1-3 Pitot Assemblies .................................................. 1-3 Replacement Pitot for Pitot Assemblies .............. 1-3 Traverse Umbilical Cable .................................... 1-3 Solid Thermocouples .......................................... 1-4method 3 ................................................................ 1-5 Flue Gas Analyzer ............................................... 1-5 Tedlar Bags ......................................................... 1-6 Sample Pump ..................................................... 1-6method 5 ................................................................ 1-7 Method 5 Sampling Train .................................... 1-7 Cateco Method 5 Sampling Train ........................ 1-9 Isokinetic Control Console ................................ 1-13 Control Console Shipping Case ........................ 1-15 Critical Orifice Set .............................................. 1-15 Impinger Outlet .................................................. 1-15 TI 86 Programmed Calculator ........................... 1-16 Replacement Dry Gas Meter ............................. 1-16 Calibration Dry Gas Meter ................................. 1-16 Sample Unit Oven Compartment ...................... 1-17 Cateco Heated Filter Unit ................................. 1-17 Modular Sample Unit ........................................ 1-18 Impinger Compartments .................................... 1-18 Heated Sample Probe ...................................... 1-19 Water-Cooled Sampling Probe ......................... 1-21 Heated Probe Liners ......................................... 1-23 Unheated Probe Liners ..................................... 1-24 Stainless Steel Ball Joint and Socket ................ 1-24 Replacement Pitot for Probe Assemblies .......... 1-25 Method 5 Probe Rewrap Kits ............................ 1-25 Stainless Steel Port Adapter Seal Assembly ..... 1-25 Sample Recovery Kit ......................................... 1-26 Probe Rod Kits and Probe Wash Bottles .......... 1-26 Sample Containers ............................................ 1-26 Method 5 Umbilical Cable ................................. 1-27 Isokinetic Sampling Nozzles ............................. 1-27

Pagemethod 5 ................................................................ 1-7 Isokinetic Sampling Nozzles Accessories ......... 1-28 Method 5 Ball Joint (O-ring) Glassware Sets .. 1-29 Glassware Shipping Case ................................ 1-29 Individual Ball Joint Glassware and Clamps ..... 1-31 Teflon® Impingers/Connectors/Filter Holders .... 1-31 Filter Holders, Frits and Clamp Rings ............... 1-32 Tared Filter Media ............................................. 1-33 Filters - Glass, Quartz and Teflon® .................... 1-34method 6 .............................................................. 1-35 Method 6 / Vost Control Console ...................... 1-35 Vost Control Console Shipping Case ................ 1-35 Method 6 Midget Sample Unit ........................... 1-36 Method 6 Umbilical Cable ................................. 1-36 Method 6 Individual Glassware ......................... 1-37 Method 6 Glassware Accessories ..................... 1-37 Method 6 Impinger Set ...................................... 1-38 Method 6 Heated Sampling Probe .................... 1-38method 8a & So3 ................................................. 1-39 8A & SO3 Controlled Condensation System ..... 1-39 8A & SO3 Probe ................................................ 1-41 8A & SO3 Glassware ......................................... 1-42method 17 ............................................................ 1-43 Method 17 Probes ............................................. 1-43 Method 17 Umbilical Cables ............................. 1-43 Nozzles, Filter Holders & Associated Items ...... 1-43 Method 17 Train ................................................ 1-44method 23 ............................................................ 1-45 Method 23 Sampling Train ................................ 1-45method 29 ............................................................ 1-47 Method 29 Sampling Train ................................ 1-47method 30B .......................................................... 1-49 Method 30B Control Console ............................ 1-49 Method 30B Gas Conditioner ............................ 1-51 Method 30B Probe ............................................ 1-51method 201a ........................................................ 1-54 PM10 Cyclone Package .................................... 1-54



table of contents


cem equipmenT parTs & accessories

porTable analyzers

PagenoX analyzers ...................................................... 2-3 ECO Physics NOX Analyzer................................. 2-3cEm Probes .......................................................... 2-4 JCT Heated Filter Probe ..................................... 2-4 CEM Heated Filter Probe .................................... 2-5 Heated CEM Probes ........................................... 2-6cEm Equipment ................................................... 2-7 Cateco CEM Heated Filter Unit ........................... 2-7 Large Cateco CEM Heated Filter Unit ................ 2-8Rata & cEm Equipment ...................................... 2-8 CEM Heated 3 Point Probe ................................. 2-8 Heated Sample Line ........................................... 2-9temperature controllers ..................................... 2-11 Universal Temperature Controller ....................... 2-11 Multiple Zone Temperature Controller ................. 2-11 Rack Mount Temperature Controller ................... 2-12Sample gas conditioners ................................. 2-13 MAK 10 Gas Conditioner .................................. 2-13 SGC4000 Gas Conditioner ............................... 2-18 Stainless Steel Coil Condenser ........................ 2-18cEm control Panels ........................................... 2-19 Dilution Control Panel ....................................... 2-19 FLW6 Flow Panel .............................................. 2-19 5 Channel Calibrator ......................................... 2-20 Sample Gas Distribution Module ...................... 2-20

PagePortable gas analyzers ....................................... 3-3 Testo 350 ............................................................ 3-3 Testo 330 ............................................................ 3-6 Testo 335 ............................................................ 3-6 ECOM-AC Plus .................................................. 3-12Portable analyzers .............................................. 3-7 Testo 875 ............................................................ 3-7

PageFilter Holders & Frits ........................................... 4-3 47 mm Stainless Steel Filter Holder ................... 4-3 47 mm Teflon Filter Holder .................................. 4-3 Cartridge Style Stainless Steel Filter Holder ....... 4-3 Fritted Holder ...................................................... 4-3 Disposable In line Filter ........................................ 4-3Peristaltic Pumps and Sample Pumps ............... 4-4 ADI Pumps .......................................................... 4-4 Gast Pumps ........................................................ 4-4 KNF Pumps ......................................................... 4-4 Masterflex Pumps ............................................... 4-4 Thomas Pumps ................................................... 4-4 CleanAir Pumps ................................................. 4-4Regulators ............................................................ 4-5 Brass Regulators ................................................ 4-5 Stainless Steel Regulators .................................. 4-5Heating Element ................................................... 4-6 Silicone Heaters .................................................. 4-6 High Temperature Glass Heaters ........................ 4-7 High Temperature Cable Heaters ........................ 4-7 Cartridge, Strip & Tubular Heaters ...................... 4-7temperature controllers ..................................... 4-8 Fuji Controllers .................................................... 4-8 Watlow Controllers .............................................. 4-8 CleanAir Controllers ........................................... 4-8tubing and Pipe ................................................... 4-9 Stainless Steel Tubing and Pipe ......................... 4-9 Inconel Tubing and Pipe ..................................... 4-9 Titanium Tubing and Pipe ................................... 4-9 Flexible Tubing .................................................. 4-10 Teflon® Tubing .................................................... 4-10accessories ........................................................ 4-11 Tube Compression Fittings ............................... 4-11 Amphenol Connector Parts ..................................4-8 Flowmeters, Solenoids & Solid State Relays .... 4-14 Manometers and Replacement Parts ............... 4-14 Quick Wire Connectors & Equipment Fans ...... 4-16

Sour

ce S

ampli

ng E

quipm

ent

1-1CleanAir® Express

A Division of CleanAir® EngineeringPhone: (800) 223-3977 Fax: (847) 991-8924

Web site: www.cleanair.com

All CleanAir Engineering sampling trains con-tain components that are compatible with and comparable to systems currently used in the industry today.

Let the account teams at CleanAir Engineer-ing Express help you assemble these sampling train components required to perform EPA par-ticulate and gaseous sampling. We have all the equipment you need, when you need it.

Pagemethod 2 ................................................................ 1-3 Air Velocity Kit ..................................................... 1-3 Pitot Assemblies .................................................. 1-3 Replacement Pitot for Pitot Assemblies .............. 1-3 Traverse Umbilical Cable .................................... 1-3 Solid Thermocouples .......................................... 1-4method 3 ................................................................ 1-5 Flue Gas Analyzer ............................................... 1-5 Tedlar Bags ......................................................... 1-6 Sample Pump ..................................................... 1-6method 5 ................................................................ 1-7 Method 5 Sampling Train .................................... 1-7 Cateco Method 5 Sampling Train ........................ 1-9 Isokinetic Control Console ................................ 1-13 Control Console Shipping Case ........................ 1-15 Critical Orifice Set .............................................. 1-15 Impinger Outlet .................................................. 1-15 TI 86 Programmed Calculator ........................... 1-16 Replacement Dry Gas Meter ............................. 1-16 Calibration Dry Gas Meter ................................. 1-16 Sample Unit Oven Compartment ...................... 1-17 Cateco Heated Filter Unit ................................. 1-17 Modular Sample Unit ........................................ 1-18 Impinger Compartments .................................... 1-18 Heated Sample Probe ...................................... 1-19 Water-Cooled Sampling Probe ......................... 1-21 Heated Probe Liners ......................................... 1-23 Unheated Probe Liners ..................................... 1-24 Stainless Steel Ball Joint and Socket ................ 1-24 Replacement Pitot for Probe Assemblies .......... 1-25 Method 5 Probe Rewrap Kits ............................ 1-25 Stainless Steel Port Adapter Seal Assembly ..... 1-25 Sample Recovery Kit ......................................... 1-26 Probe Rod Kits and Probe Wash Bottles .......... 1-26 Sample Containers ............................................ 1-26 Method 5 Umbilical Cable ................................. 1-27 Isokinetic Sampling Nozzles ............................. 1-27

source sampling equipmenT

0032

our Field emergency serviceCleanAir Express will ship overnight, at our ex-pense, any CleanAir Express component to complete your testing in the event of equipment failure. We will do this for any location in the U.S. via Fed Ex Priority Overnight ®. In addition we will also provide a replacement for any competing Method 5 equipment that is compatible with Clea-nAir components. This service is provided free of charge to any past or future CleanAir customers. We only request that you return the equipment as soon as possible with a brief explanation of the problem you encountered and any ideas you have on how it may be prevented.

Source Sampling Equipment

1-2

SouRcE SamPlIng EquIPmEnt



Pagemethod 5 ................................................................ 1-7 Isokinetic Sampling Nozzles Accessories ......... 1-28 Method 5 Ball Joint (O-ring) Glassware Sets .. 1-29 Glassware Shipping Case ................................ 1-29 Individual Ball Joint Glassware and Clamps ..... 1-31 Teflon® Impingers/Connectors/Filter Holders .... 1-31 Filter Holders, Frits and Clamp Rings ............... 1-32 Tared Filter Media ............................................. 1-33 Filters - Glass, Quartz and Teflon® .................... 1-34method 6 .............................................................. 1-35 Method 6 / Vost Control Console ...................... 1-35 Vost Control Console Shipping Case ................ 1-35 Method 6 Midget Sample Unit ........................... 1-36 Method 6 Umbilical Cable ................................. 1-36 Method 6 Individual Glassware ......................... 1-37 Method 6 Glassware Accessories ..................... 1-37 Method 6 Impinger Set ...................................... 1-38 Method 6 Heated Sampling Probe .................... 1-38method 8a & So3 ................................................. 1-39 8A & SO3 Controlled Condensation System ..... 1-39 8A & SO3 Probe ................................................ 1-41 8A & SO3 Glassware ......................................... 1-42method 17 ............................................................ 1-43 Method 17 Probes ............................................. 1-43 Method 17 Umbilical Cables ............................. 1-43 Nozzles, Filter Holders & Associated Items ...... 1-43 Method 17 Train ................................................ 1-44method 23 ............................................................ 1-45 Method 23 Sampling Train ................................ 1-45method 29 ............................................................ 1-47 Method 29 Sampling Train ................................ 1-47method 30B .......................................................... 1-49 Method 30B Control Console ............................ 1-49 Method 30B Gas Conditioner ............................ 1-51 Method 30B Probe ............................................ 1-51method 201a ........................................................ 1-54 PM10 Cyclone Package .................................... 1-54

source sampling equipmenT conTinued

®

0028

Metho

d 2Me

thod 2

Metho

d 2

Air Velocity Kit

Pitot Assemblies

Replacement Pitot for Pitot Assemblies

Standard Pitot Tube

1-3

Traverse Umbilical



SouRcE SamPlIng EquIPmEnt call or order online today! ®

Part number Item0051-5 0-5” Air Velocity Kit (8” pitot)0051-5L 0-5” Air Velocity Kit (18” pitot)0051-10 0-10” Air Velocity Kit (18” pitot)

0051-10S 0051-10 with “S” type pitot

each kit includes: • Stainless steel standard pitot tube• Inclined-vertical manometer• Two (2) 9’ lengths of rubber tubing• Air velocity calculator slide rule• Magnetic mounting clips• Additional gauge oil • Steel carrying case.

Part number03 - Length (0306 = 6 Ft. Pitot Assembly)

*Custom order lengths always available

pitot assemblies include: • “S” type pitot• Grounded Stack Thermocouple• Pitot and Thermocouple are shrouded

into a 1” stainless steel sheath• Geometric pitot calibration is included.

Wind tunnel calibration optional• For Overall length add 6” to effective

length

Part number03 - Length - E (0306E = 6 Ft. Replacement Pitot)

*Lengths indicate effective length. Overall length add 6”

Geometric calibration is included with re-placement pitot. 1/4” O. D. stainless steel tube construction.

Lightweight umbilical constructed of two polyethylene pitot lines and one polyvi-nyl-coated thermocouple extension wire, wrapped in nylon mesh material.

Part number0350 - Length (0350 - 25 = 25 Ft. Umbilical)

These pitots are fabricated of stainless steel and have a correction factor of .99. The hose ends are straight 3/16” O.D. tube for easy hose slipover.

Part number03 - Length - L (0301-L = 1 Ft. Standard Pitot)

Method 2Method 2

Method 2

Solid Thermocouples

Thermocouples Accessories





Part number Item0315.5 6” solid thermocouple .250 O. D.03152 27” solid thermocouple .125 O. D. for 2’ effective instrument03153 39” solid thermocouple .125 O. D. for 3’ effective instrument03154 51” solid thermocouple .125 O. D. for 4’ effective instrument03155 63” solid thermocouple .125 O. D. for 5’ effective instrument03156 75” solid thermocouple .125 O. D. for 6’ effective instrument03157 87” solid thermocouple .125 O. D. for 7’ effective instrument03158 99” solid thermocouple .125 O. D. for 8’ effective instrument03159 111” solid thermocouple .125 O. D. for 9’ effective instrument031510 123” solid thermocouple .125 O. D. for 10’ effective instrument031511 135” solid thermocouple .125 O. D. for 11’ effective instrument031512 147” solid thermocouple .125 O. D. for 12’ effective instrument031513 159” solid thermocouple .125 O. D. for 13’ effective instrument031514 171” solid thermocouple .125 O. D. for 14’ effective instrument

Part number Item0315-G Type K wire, glass braid insulation, 20 AWG, (900 Deg. F) 0315-P Type K wire, polyvinyl insulation, (stranded) 20 AWG0315-T Type K wire, Teflon® insulation, 22 AWG, (450 Deg. F)0316-M Plug, type K, standard male0316-F Plug, type K, standard female

0316-MM Plug, type K, mini male0316-FM Plug, type K, mini female

0316-PMSI Type K, standard female, panel mount snap in (1.2”x 0.64” cutout)0316-SM Type K, standard female, panel mount in ½” conduit hole

0316PMMINI Type K, mini female, panel mount snap in (0.66”x 0.32” cutout)

0315G 0315P 0315T

0316M 0316F 0316MM

0316FM 0316SM0316PMSI

0316PMMINI

CleanAir Express has a huge selection of Thermocouples and Thermocouples acces-sories. Custom Lengths are available.

Type “K” thermocouple, grounded, stainless steel sheath, 1/8”O. D. with standard K-Type male plug. Custom Thermocouple available in as few as three days.

Specification: • Sheath- Stainless steel• Style- Quick Disconnect Stan-

dard Male Plug• Calibration- Type K• Diameter- 0.125 (1/8)”• Junction- Grounded• Continuous Temperature Limit-

1600°F

Metho

d 3Me

thod 3

Metho

d 3

Flue Gas Analyzer





Part number Item0650 Allied cabinet model (A)06501 Same as 0650 with three contact bubblers06502 Industro model B

06502A Industro model B without solutionsFlue gas analyzer Parts & Solutions

0651-1 Contact Pipette (A)0651-2 Contact Pipette (B)0652-1 Auto Bubbler Pipette (A)0652-2 Auto Bubbler Pipette (B)0653-1 Orsat Leveling Tube (A)0653-2 Orsat Leveling Tube (B)0654 Gas Expansion Bag (B)0655 Orsat Burette 0-21% (B)

0655-3 Cosorb Solution, 3 oz.0655-8 Cosorb Solution, 8 oz.0656 Orsat Burette 0-30% (B)

0656-3 Oxsorb Solution, 3 oz.0656-8 Oxsorb Solution, 8 oz.0657-16 Disorb Solution, 16 oz.0657-3 Disorb Solution, 3 oz.0658-16 Burette Solution, 16 oz.0658-3 Burette Solution, 3 oz.0660-2 Water Jacket (B)0661-B Water Jacket Cap Bottom (B)0661-T Water Jacket Cap Top (B)0663 Rubber Stopper with Bent Tube (B)0664 Valve Assembly (B)

0664-S Valve Seats (5 per package)

CleanAir Express Flue Gas Analyzer rapidly analyzes gas mixtures, specifically to determine carbon dioxide, oxygen and carbon monoxide.Burrell allied cabinet model gas analyzer:Graduated 100-ml gas measuring burette, one contact and two auto bubbler absorption pipettes for determining carbon dioxide, oxygen and carbon monoxide levels. Burrell Industro model B gas analysis System:Graduated 0-21% gas measuring burette, one contact and two auto bubbler absorption pipettes for determining carbon dioxide, oxygen and carbon monoxide levels. So-lutions are included.

Features: • The Method 3 INDUSTRO-B is a simplified instrument

for the rapid and accurate field analysis of gas mix-tures.

• For the determination of carbon dioxide, oxygen and carbon monoxide in gas mixtures.

• Commonly used in the analysis of chimney gases for the regulation of combustion in coal-, oil-, and gas-fired furnaces.

• It can also be used for combustion control, furnace atmosphere analysis, air-leak detection, research and plant control, calibration of control instruments, and EPA testing.

• Minimum number of glass parts combined with metal components for rugged field applications.

• Two auto-bubbler pipettes and one contact pipette.• Bulb type burette, 50 ml. graduated 0 to 21% in 0.2%.• Carrying case• Operating instructions• Price also includes one 3 ounce bottle of each Re-

agent.• Reagents: Oxsorbent, Di-Sorbent, Cosorbent and Bu-

rette Solution.• DIMENSIONS: 15 inches high x 9 inches wide x 4

inches deep.• WEIGHT: 10 pounds

Method 3Method 3

Method 3

Tedlar® Bags





Sample Bag Size Part numberHose Barb Fitting Septum Fitting

7” x 7” (1 liter) 0604T 0604SEP12”x 12” (4 liter) 0607 0607SEP

15”x 15” (8.5 liter) 0605 0605SEP24”x 24” (40 liter) 0608 0608SEP 24”x 36” (50 liter) 0606 0606SEP

30”x 36” (100 liter) 0609 0609SEP

Unlike other sample bag materials, Tedlar® film resists gas permeation - both into and out of the bag, assuring sample integrity for all applications. Tedlar® is rated for continuous use from -98 to 225 F. This wide range of operation allows for use in very cold or very hot environments including stacks, vents, and flues. Tedlar® film is inert to a wide range of chemicals. Tedlar® Bags are referenced for many EPA methods, including Methods 3, 18 and 40. *Note: We recommend shipping filled Tedlar® bags in a rigid carton to prevent damage/discharge during shipping. Do not ship sample bags by air unless the cargo cabin is pressurized. Do not overfill sample bags - avoid filling the bag to more than 80% of its maximum volume. At the end of the sampling period, turn the pump off and close the valve on the bag.

Sample Pump

Part number Item0728 Sample Pump

Single head, Teflon® lined sample pump mounted in a rugged metal enclosure. Includes: 0.5 - 5.0 LPM flow meter with stainless steel valve, replaceable in-line filter, front panel mounted on/off switch and circuit breaker, inlet and outlet have ¼” SS compression fittings.

Standard RobertsBarbed Valve

Optional Twist Valve w/ Septum

Metho

d 5Me

thod 5

Metho

d 5

Method 5 Sampling Train





Part number Item0028 Isokinetic Control Console with Pump0032 Sample Oven Compartment0033 Impinger Compartment

05003B 3” Glassware Kit Ball Joint or Ball Joint O-ring0034 Stainless Steel Impinger Outlet

036050QC 50’ Umbilical Cable with Stainless Steel Quick Connects0106BS 6’ Stainless Steel Heated Method 5 Probe with Liner and Geometric Calibration Report

0140 Stainless Steel Probe Port Adaptor Seal Assembly0400NS Complete Set of Stainless Steel Nozzles (1/8”, 3/16”, 1/4", 5/16”, 3/8”, and 1/2") with nuts and ferrules

0156 Sample Recovery Kit0621.26 8.26 cm Glass Fiber Filters (Box of 100)0030R2B Impinger Bottle Rack (Impingers sold separately)

0006 TI-89 Programmed Calculator

• Power Requirement: 120V and 240V configurations in stock• Thermocouple Connections: Type K• Cabinets: Welded Aluminum Detachable/Stackable Meter and Pump• Temperature Controllers: Solid State with 6 Channel Selector • *Method 5 Train Components Also Available Separately.

The CleanAir Method 5 Train is the benchmark of the industry. It is suited to perform isokinetic particulate testing Referenc-ing Federal EPA 40 CFR 60, Appendix A, Method 5 -“Determination of Particulate Emissions From Stationary Sources.” Other pollutants can be collected in the impinger portion of the system providing the proper reagent is utilized. A Method 5 Train is the basic equipment for several EPA Reference Methods. Ask your CleanAir Express Customer Service Represen-tative for details on the accessories needed to perform Methods 4, 5, 6, 8, 8A, 5I, 17, 23, 26, and 29.

Part number 0100-5

Method 5Method 5

Method 5

Method 5 Sampling Train Diagram

1-8

250

250

250

8888

Impinger Outlet 28 \12#0034

180 Deg.Connector28\12 #0505

4 Impinger Compartment#0033

Standard Impinger Assembly(Greenburg Smith) #05755

Modified Impinger Assembly#05750

3" M5 Filter Assembly28\12 #0509BTFE

Cyclone Bypass 28 \12#0504

M5 Sample Oven#0032

Port Seal Adapter#0140

M5 Probe,Liner and Nozzle

Method 5 Umbilical

Isokinetic Control Console#0028

Monorail Support#0099

Stack Wall


Double "L" Connector28/12 #0506L




Metho

d 5Me

thod 5

Metho

d 5

1-9

Cateco Method 5 Sampling Train




The Method 5 Cateco Sampling Train is similar to the Method 5 train except that it replaces the Modular Sample Unit with a more versatile Cateco Heated Fil-ter Unit. Separating the probe and heated filter from the glassware makes this train ideal for testing vertical and hard to access locations. The CleanAir Cateco Method 5 Train is suited to perform isokinetic particulate test-ing Referencing Federal EPA 40 CFR 60, Appendix A, Method 5 -“Determination of Particulate Emissions From Stationary Sources.” Other pollutants can be col-lected in the impinger portion of the system providing the proper reagent is utilized. Many components of the Cateco Method 5 Train are also basic equipment for several other EPA Reference Methods. Ask your Clea-nAir Express Customer Service Representative for de-tails about the accessories needed to perform Methods 4, 5, 6, 8, 8A, 5I, 17, 23, 26, and 29.

Part number Item0028 Isokinetic Control Console with Pump0035 Cateco Heated Sample Oven Compartment0033 Impinger Compartment

0500C 3” Cateco Ball Joint or Ball Joint O-ring Glassware Set00368 8.5 cm Stainless Steel Filter Assembly0034 Stainless Steel Impinger Outlet

036050QC 50’ Umbilical Cable with Stainless Steel Quick Connects0361EXT 10’ Cateco Extension0106BS 6’ Stainless Steel Heated Method 5 Probe with Liner and Geometric Calibration Report


0156 Sample Recovery Kit0621.26 8.26 cm Glass Fiber Filters (Box of 100)

• Power Requirement: 120V and 240V configurations in stock• Thermocouple Connections: Type K• Cabinets: Welded Aluminum Detachable/Stackable Meter and Pump• Temperature Controllers: Solid State with 6 Channel Selector • *Method 5 Train Components Also Available Separately.

Part number 0100-C5

Method 5Method 5

Method 5

Cateco Method 5 Sampling Train Diagram

1-10

250

250

250

8888

Impinger Outlet 28/12#0034

180 Deg.Connector28/12 #0505

Isokinetic Control Consol#0028

Stack Wall

Cateco Method 5 Sampling Train

Cateco Heated Filter Oven#0035

Socket to Hose BarbConnector 28/12#0508

M5 Probe, Liner, and Nozzle


3" M5 Cateco Filter Assembly28/12 #0037

Teflon Jumper

Method 5 Umbilical


Standard Impinger Assembly(Greenburg-Smith) #05755


Cateco Umbilical Extension0361 EXT

(Electrical Line)

(Pitot Lines) (Thermocouples)

(Sample Line)




Metho

d 5Me

thod 5

Metho

d 5

1-11

Method 5 CE Sampling Train




Part number 0100-5-240vCE

Part number Item0028220MCE Isokinetic Control Console with Pump – CE Marked0032220CE Sample Oven Compartment – CE Marked

0033 Impinger Compartment05003B 3” Glassware Kit Ball Joint or Ball Joint O-ring

0034 Stainless Steel Impinger Outlet036050QCCE 50’ Umbilical Cable with Stainless Steel Quick Connects – CE Marked0106BS220CE 6’ Stainless Steel Heated Method 5 Probe with Liner and Geometric Calibration Report – CE Marked



• Power Requirement: 240V configurations in stock• Thermocouple Connections: Type K• Cabinets: Welded Aluminum Detachable/Stackable Meter and Pump• Temperature Controllers: Solid State with 6 Channel Selector • *Method 5 Train Components Also Available Separately.

The CleanAir Method 5 Train is suited to perform isokinetic particulate testing referencing US EPA 40 CFR 60, European prEN 13284-1. It is also compatible with Standard ISO 9096 for sampling particulates emissions from chimneys or smoke stacks. Condensable pollutants can be collected in the impingers per EPA Method 202.

Method 5Method 5

Method 5

Method 5 CE Sampling Train Diagram

1-12

3

1

+

-

2

P

mu

P

uX

aVacuum

89

10

76

45

F loW cont Rol

250

250

250

8888








M5 Sample Oven#0032220CE


M5 Probe, Liner and Nozzle

Method 5 Umbilical

Isokinetic Control Console#0028220MCE

Monorail Support#0099

Stack Wall

Method 5 CE Sampling Train


P RoBE F IltER auX.




Metho

d 5Me

thod 5

Metho

d 5

1-13

Isokinetic Control Console




Part number Item0028 Control Console and Pump

0028-220M Control Console and Pump(240V Metric)0028-110M Control Console and Pump(120V Metric)0028-PMP Pump Assembly US 120V0028-P220 Pump Assembly Metric 240V

Specifications• Sample Pump: Pulsation Free 1/3 HP Rotary Vane Vacuum

Pump (26” Hg Vac, 2 cfm @ 15” Hg) 120V / 240V, 50 /60 Hz • Dry Gas Meter: S-275 (L/rev., Ft./rev., & m3/rev. options)• Manometer: 8” Dual Incline with Stainless Steel Quick-Con-

nects Solenoid Valves Provide Zeroing Ability at any Time• Timer: Digital LCD with Battery Backup (Displays h, m, s)• Umbilical Power Output Connection: Amphenol 4-pin Fused• Auxiliary Power Output Connection: 3 pin 120 V Receptacle• Pitot Inlet Connections: 3/8” Stainless Steel Quick Connects• Sample Inlet Connection: 1/2”” Stainless Steel Quick Connect

with Stainless Steel Valves• Pumpless: Integrated Gas Sample System• Temperature Controllers: Solid State for Probe, Filter, and 6

Channel Selector • Thermocouple Connections: K-Type Panel Mount• Cabinets: Welded Aluminum, Detachable/Stackable Meter and

Pump• Quick-Release: Access Doors for Both Meter and Pump• External Dimensions (h x w x d): 17.5” x 12” x 27” (445 mm x

305 mm x 686 mm)• Weight: 70 lbs. (32 kg)

The CleanAir Express Method 5 Isokinetic Control Console is de-signed to allow monitoring and control of temperatures, pressures, gas velocities and sample flow rates to maintain Isokinetic sam-pling conditions. Top quality components and field proven durability make this the most dependable control console on the market you can buy. Compatible with most systems currently in use. Suitable for EPA methods: 4, 5, 5I, 6, 8, 8A, 13, 17, 23, 26, 29, and many more (with proper accessories).

Method 5Method 5

Method 5

1-14

Isokinetic Control Console Part Number Diagram

P Itot

oPEn

F IltER

P umP

l ooSEn

F IltER

uX

a

P RoBES tacK1 2 3

P

V acuum

Pum

P RE SS uRE

Vacuum

outlEt auX Il IaRY4 5

ImP.

P oWER P umP

P RoBE

+ l EaK cHEcKV alVES

FInE

-I .g.S.

+S amPlE

InlEt

FloW contRol

c oa RSE

cloSE

m In. SEc. RESEt

StoP

StaRt

0028-PmP




Metho

d 5Me

thod 5

Metho

d 5

1-15

Control Console Shipping Case

Critical Orifice Set

Impinger Outlet




Part number Item0028MC Meter Box Shipping Case0028PC Pump Box Shipping Case

Part number Item0020 Critical Orifice Set

0020-S Individual Critical Orifice

Part number Item0034 Impinger Outlet 3/8” Tube Outlet Connection

0034QC Impinger Outlet 1/2" Quick Connect outlet *Optional quick connect fittings available

The control console shipping case includes pre-cut pick and pluck foam inserts. Pro-tects meter and pump from shipping damage.

To be used as a dry gas meter calibration reference, the CleanAir Express critical orifice offers 1/2” brass quick connects with an internal stainless steel orifice plate. A set contains six orifices ranging from 10- 34 LPM, as prescribed in EPA Method 5. Each set comes complete with a dust-proof/moisture proof lifetime guaranteed car-rying case. Individual calibration sheets are also included.

The impinger outlet is connected to the last impinger in the sample train and provides a rigid mount for the sample umbilical. Designed to fit the quick release clamp on the CleanAir Express impinger compartments. Stainless steel construction, 28/12 ball joint socket inlet connection, Brass check valve, 3/8” tube or 1/2” quick connect outlet connection and 1/4” type K thermocouple.

Method 5Method 5

Method 5

1-16

TI 89 Programmed Calculator

Calibration Dry Gas Meters

Replacement Dry Gas Meters




S275 dry gas meter calibrated specifically for use as a secondary standard when calibrating other dry gas meters or metering consoles. Includes: stainless steel fittings and dial thermometer.

Part number Item0390 U.S. Secondary Standard0392 Metric Secondary Standard

Part number Item0028D S 275 Cubic ft. Replacement Dry Gas Meter Assembly

0028DM S 275 Metric Liter Replacement Dry Gas Meter Assembly for M-5 Meter0028DM1 S 275 Metric M3 Replacement Dry Gas Meter Assembly for M-5 Meter

9922 S 275 .1 CU. FT./rev. Dry Gas Meter 99221 S 275 m3/rev. Dry Gas Meter 0393 S 275 Liter/rev. Dry Gas Meter

Replacement dry gas meters are available for use in many of today’s systems. Clea-nAir Express can also rebuild and calibrate your present meter control console.

Part number Item0006 Calculator with Programs

Pre-programmed with Isokinetic stack sampling calculations. Programmed in English and Metric units.

Programs Included:• Traverse Points• Stack Gas Moisture Content• Stack Gas Velocity and Volumetric Flow Rate• Nozzle Size and K-Factor• Stack Gas Saturation Moisture Content• Critical Orifice Field Calibration• Post-Test Isokinetic

Metho

d 5Me

thod 5

Metho

d 5

1-17

Sample Unit Oven Compartment

Cateco Heated Filter Unit




Part number Item0032 120V Sample Unit Oven Compartment

0032-220 240V Sample Unit Oven Compartment

Part number Item0035 120V Cateco Heated Filter Unit

0035-220 240V Cateco Heated Filter Unit

The double-wall aluminum constructed heated filter unit is an excellent alternative to the much larger Modular Sample Unit. It is ideally suited for applications that require vertical sampling. The case is extremely lightweight and durable, and heats quickly with its small heating area. The probe is mounted through an aluminum arm identical to those used on the Modular Sample Unit. Electrical connections are compatible with those used in the industry. It is designed for use with CleanAir Express stainless steel or glass filter holders.

The light-weight aluminum sample unit oven compartment is used for testing methods that require an out-of-stack heated filter. This unit features a rugged cast aluminum probe support arm, monorail support hanger, Impinger compartment slide rails, and two access doors. Compatible with industry standard umbilicals, probes, and Impinger compartments.

Specifications• Voltage Requirement: 120 V / 240V• Power Requirement: 450 W• Umbilical Power Input Connection: Amphenol 4-pin• Probe Power Output Connection: 3 pin 120 V receptacle• Thermal Couple Connection: K-Type panel mount• External Dimensions (h x w x d): 7.5” x 9.25” x 16.25” • Internal Dimensions (h x w x d): 6.25” x 7.25” x 7.25” • Weight: 7 lbs. (3.2 kg)

Specifications• Voltage Requirement: 120 V / 240V• Power Requirement: 500 W• Auxiliary Power Output Connection: 3 pin 120 V receptacle• Probe Power Output Connection: 3 pin 120 V receptacle• Thermal Couple Connection: K-Type panel mount• External Dimensions (h x w x d): 23.5” x 10.75” x 17.5”(597 mm x 273

mm x 444 mm)• Internal Dimensions (h x w x d): 19.5” x 8.5” x 8.25” (495 mm x 216

mm x 210 mm)• Weight: 18 lbs. (8.2 kg)

Method 5Method 5

Method 5

1-18

Modular Sample Unit Diagram

Impinger Compartments

Modular Sample Unit




Part number Item0033 4 Impinger Compartment0030 6 to 8 Impinger Compartment

Part number Item0031 120V Modular Sample Unit

0031-220 240V Modular Sample Unit

The Modular Sample Unit consist of a Sample Unit Oven Compartment and a 4 or 8 Impinger Compartment. Includes quick release system.

Metho

d 5Me

thod 5

Metho

d 5

1-19

Method 5 Heated Sampling Probe




With 28/12 Ball Joint / 5/8” chamfered End linerPart number liner material Item

0104-B- (P), (Q), (S), (I), (T) 4’ M-5 Probe0106-B- (P), (Q), (S), (I), (T) 6’ M-5 Probe0108-B- (P), (Q), (S), (I), (T) 8’ M-5 Probe0110-B- (P), (Q), (S), (I), (T) 10’ M-5 Probe

With 28/12” Ball Joint / 14/35 male tapered End linerPart number liner material Item

0104-BT- (P), (Q), (S), (I), (T) 4’ M-5 Probe0106-BT- (P), (Q), (S), (I), (T) 6’ M-5 Probe0108-BT- (P), (Q), (S), (I), (T) 8’ M-5 Probe0110-BT- (P), (Q), (S), (I), (T) 10’ M-5 ProbeWith 28/12 Ball Joint o-ring / 5/8” chamfered End liner

Part number liner material Item0104-BO- (P), (Q), (S), (I), (T) 4’ M-5 Probe0106-BO- (P), (Q), (S), (I), (T) 6’ M-5 Probe0108-BO- (P), (Q), (S), (I), (T) 8’ M-5 Probe0110-BO- (P), (Q), (S), (I), (T) 10’ M-5 Probe

With 28/12” Ball Joint o-ring / 14/35 male tapered End linerPart number liner material item0104-BOT- (P), (Q), (S), (I), (T) 4’ M-5 Probe0106-BOT- (P), (Q), (S), (I), (T) 6’ M-5 Probe0108-BOT- (P), (Q), (S), (I), (T) 8’ M-5 Probe0110-BOT- (P), (Q), (S), (I), (T) 10’ M-5 ProbeWith 5/8” chamfered End / 14/35 male tapered End liner

Part number liner material Item0104-T- (P), (Q), (S), (I), (T) 4’ M-5 Probe0106-T- (P), (Q), (S), (I), (T) 6’ M-5 Probe0108-T- (P), (Q), (S), (I), (T) 8’ M-5 Probe0110-T- (P), (Q), (S), (I), (T) 10’ M-5 Probe

CleanAir Express Method 5 Heated Sampling Probes feature a unique sheathed design that allows quick and easy re-placement of pitot, stack thermocouple, and liner. Geometric calibration of pitot is included: wind tunnel calibration is also an option. *Note: Standard probes use a flexible silicone heater (Max temp. 500 deg. F). Optional high temperature heaters are available. *Note: Lengths below indicate effective length. To determine overall length, add 12”. Custom probe lengths and materials are available. Please specify liner material when ordering.

Heated sampling probe includes:• Heated Liner - 28/12 ball joint, 28/12

ball joint o-ring, 14/35 male taper or 5/8” chamfered end.

• Type K probe liner thermocouple with standard male plug

• Type K stack thermocouple with stan-dard male plug

• Type “S” pitot

liner material: (P) Pyrex (Q) Quartz (S) 316 stainless steel (I) Inconel (T) Titanium

power requirement:120V AC or 240V configurations are avail-able.

Method 5Method 5

Method 5

1-20

Method 5 Heated Sampling Probe Diagram

Prob

e en

d co

mpl

etel

y w

elde

d sh

utto

pre

vent

any

pos

itive

or n

egat

ive

pres

sure

loss

5/8"

tube

nut

sec

urel

yw

elde

d to

line

r she

ath

Easi

ly re

plac

ed s

ampl

e lin

er

Inte

rnal

hea

ting

elem

ent n

ot a

ttach

ed to

line

r

1" L

iner

she

ath

fits

mos

t mod

ular

sam

ple

case

pro

be s

uppo

rt ar

ms

Type

K p

robe

line

rth

erm

ocou

ple

with

stan

dard

mal

e pl

ug

Ther

moc

oupl

e se

aled

with

tube

uni

onto

pre

vent

inac

cura

te th

erm

ocou

ple

resp

onse

1-1/

4" S

ch. 5

out

er s

heat

h pr

ovid

es a

n ex

celle

ntsu

rface

for s

ealin

g pr

obe

to p

ort w

hile

als

oad

ding

sup

erio

r pro

tect

ion

and

stab

ility

2" p

ort a

dapt

er s

eal a

ssem

bly

help

s to

sec

ure

and

seal

pro

be

Gro

unde

d, re

plac

eabl

e,Ty

pe K

sta

ck th

erm

ocou

ple

with

sta

ndar

d m

ale

plug

All s

tain

less

ste

el c

onst

ruct

ion

"S" t

ype,

repl

acea

ble,

adj

usta

ble,

one-

piec

e pi

tot t

ube




Metho

d 5Me

thod 5

Metho

d 5

1-21

Method 5 Water-Cooled Sampling Probe

With 28/12 Ball Joint / 5/8” chamfered End linerPart number liner material Item

0104W-B- (P), (Q), (S), (I), (T) 4’ M-5 Probe0106W-B- (P), (Q), (S), (I), (T) 6’ M-5 Probe0108W-B- (P), (Q), (S), (I), (T) 8’ M-5 Probe0110W-B- (P), (Q), (S), (I), (T) 10’ M-5 Probe

With 28/12” Ball Joint / 14/35 male tapered End linerPart number liner material Item0104W-BT- (P), (Q), (S), (I), (T) 4’ M-5 Probe0106W-BT- (P), (Q), (S), (I), (T) 6’ M-5 Probe0108W-BT- (P), (Q), (S), (I), (T) 8’ M-5 Probe0110W-BT- (P), (Q), (S), (I), (T) 10’ M-5 Probe

With 28/12 Ball Joint o-ring / 5/8” chamfered End linerPart number liner material Item0104W-BO- (P), (Q), (S), (I), (T) 4’ M-5 Probe0106W-BO- (P), (Q), (S), (I), (T) 6’ M-5 Probe0108W-BO- (P), (Q), (S), (I), (T) 8’ M-5 Probe0110W-BO- (P), (Q), (S), (I), (T) 10’ M-5 ProbeWith 28/12” Ball Joint o-ring / 14/35 male tapered End liner

Part number liner material Item0104W-BOT- (P), (Q), (S), (I), (T) 4’ M-5 Probe0106W-BOT- (P), (Q), (S), (I), (T) 6’ M-5 Probe0108W-BOT- (P), (Q), (S), (I), (T) 8’ M-5 Probe0110W-BOT- (P), (Q), (S), (I), (T) 10’ M-5 Probe

With 5/8” chamfered End / 14/35 male tapered End linerPart number liner material Item

0104W-T- (P), (Q), (S), (I), (T) 4’ M-5 Probe0106W-T- (P), (Q), (S), (I), (T) 6’ M-5 Probe0108W-T- (P), (Q), (S), (I), (T) 8’ M-5 Probe0110W-T- (P), (Q), (S), (I), (T) 10’ M-5 Probe




All CleanAir Express Method 5 water-cooled probes feature 316 stainless steel construction; a replaceable probe liner; liner heater; pitot and stack thermocouple. Geometric calibration of pitot is included: wind tunnel calibration is optional.*Note: Standard probes use a flexible silicone heater (Max temp. 500 deg. F). Optional high temperature heaters are available. *Note: Below lengths indicate effective length. To determine overall length, add 21 ¼”. Custom order lengths and materi-als are also available. Please specify liner material when ordering.

sampling probe includes:• Heated Liner - 28/12 ball joint, 28/12

ball joint o-ring, 14/35 male taper or 5/8” chamfered end.

• Type K probe liner thermocouple with standard male plug

• Type K stack thermocouple with stan-dard male plug

• Type “S” pitot



Method 5Method 5

Method 5

1-22

Method 5 Water-Cooled Sampling Probe Unheated Liners

Method 5 Water-Cooled Sampling Probe Diagram




2” 316 .065 wallInlet 3/8” Coupling

Outlet 3/8” Coupling

(1/4” Inconel)

With 28/12 Ball Joint o-ring 5/8” chamfered End linerPart number liner material Item

0204-WB- (P), (Q), (S) 4’ M-5 Probe0206-WB- (P), (Q), (S) 6’ M-5 Probe0208-WB- (P), (Q), (S) 8’ M-5 Probe0210-WB- (P), (Q), (S) 10’ M-5 ProbeWith 28/12” Ball Joint o-ring 14/35 male tapered End liner

Part number liner material Item0204-WBT- (Q) 4’ M-5 Probe0206-WBT- (Q) 6’ M-5 Probe0208-WBT- (Q) 8’ M-5 Probe0210-WBT- (Q) 10’ M-5 Probe

CleanAir Express Method 5 Water Cooled Unheated Probes Liners come in a variety of sizes and materials. *Note: Below lengths indicate effective length of Method 5 Water Cooled Probe Assembly. Custom order lengths and ma-terials are also available. Please specify liner material when ordering.

unheated probe liner:• Liner Connection - 28/12 ball joint

o-ring, 4/35 male taper or 5/8” cham-fered end.

liner material: (P) Pyrex (Q) Quartz (S) 316 stainless steel

Metho

d 5Me

thod 5

Metho

d 5

1-23

Method 5 Heated Probe Liners




With 28/12 Ball Joint 5/8” chamfered End linerPart number liner material Item


With 28/12” Ball Joint 14/35 male tapered End linerPart number liner material Item

0204-BT- (P), (Q), (S), (I), (T) 4’ M-5 Probe0206-BT- (P), (Q), (S), (I), (T) 6’ M-5 Probe0208-BT- (P), (Q), (S), (I), (T) 8’ M-5 Probe0210-BT- (P), (Q), (S), (I), (T) 10’ M-5 Probe


0204-BO- (P), (Q), (S), (I), (T) 4’ M-5 Probe0206-BO- (P), (Q), (S), (I), (T) 6’ M-5 Probe0208-BO- (P), (Q), (S), (I), (T) 8’ M-5 Probe0210-BO- (P), (Q), (S), (I), (T) 10’ M-5 ProbeWith 28/12” Ball Joint o-ring 14/35 male tapered End liner

Part number liner material Item0204-BOT- (P), (Q), (S), (I), (T) 4’ M-5 Probe0206-BOT- (P), (Q), (S), (I), (T) 6’ M-5 Probe0208-BOT- (P), (Q), (S), (I), (T) 8’ M-5 Probe0210-BOT- (P), (Q), (S), (I), (T) 10’ M-5 Probe

With 5/8” chamfered End 14/35 male tapered End linerPart number liner material Item

0204-T- (P), (Q), (S), (I), (T) 4’ M-5 Probe0206-T- (P), (Q), (S), (I), (T) 6’ M-5 Probe0208-T- (P), (Q), (S), (I), (T) 8’ M-5 Probe0210-T- (P), (Q), (S), (I), (T) 10’ M-5 Probe

CleanAir Express Method 5 Heated Probes Liners come in a variety of sizes and materials. Made for professionals and designed for use in CleanAir Express Method 5 Probes but will fit all 5/8” OD probe liner applications *Note: Standard probes use a flexible silicone heater (Max temp. 500 deg. F). Optional high temperature heaters are available. *Note: Lengths below indicate effective length of Method 5 Probe Assembly. Custom order lengths and materials are also available. Please specify liner material when ordering.

Heated probe liner:• Liner Connection - 28/12 ball joint,

28/12 ball joint o-ring, 4/35 male taper or 5/8” chamfered end.



Method 5Method 5

Method 5

1-24

Method 5 Unheated Probe Liners

Stainless Steel Ball-Joint and Socket




With 28/12 Ball Joint 5/8” chamfered End linerPart number liner material Item


With 28/12” Ball Joint 14/35 male tapered End linerPart number liner material Item

0224-BT- (P), (Q), (S), (I), (T) 4’ M-5 Probe0226-BT- (P), (Q), (S), (I), (T) 6’ M-5 Probe0228-BT- (P), (Q), (S), (I), (T) 8’ M-5 Probe0230-BT- (P), (Q), (S), (I), (T) 10’ M-5 Probe


0224-BO- (P), (Q), (S), (I), (T) 4’ M-5 Probe0226-BO- (P), (Q), (S), (I), (T) 6’ M-5 Probe0228-BO- (P), (Q), (S), (I), (T) 8’ M-5 Probe0230-BO- (P), (Q), (S), (I), (T) 10’ M-5 ProbeWith 28/12” Ball Joint o-ring 14/35 male tapered End liner

Part number liner material Item0224-BOT- (P), (Q), (S), (I), (T) 4’ M-5 Probe0226-BOT- (P), (Q), (S), (I), (T) 6’ M-5 Probe0228-BOT- (P), (Q), (S), (I), (T) 8’ M-5 Probe0230-BOT- (P), (Q), (S), (I), (T) 10’ M-5 Probe

With 5/8” chamfered End 14/35 male tapered End linerPart number liner material Item

0224-T- (P), (Q), (S), (I), (T) 4’ M-5 Probe0226-T- (P), (Q), (S), (I), (T) 6’ M-5 Probe0228-T- (P), (Q), (S), (I), (T) 8’ M-5 Probe0230-T- (P), (Q), (S), (I), (T) 10’ M-5 Probe

CleanAir Express Method 5 Unheated Probes Liners come in a variety of sizes and materials. *Note: Below lengths indicate effective length of Method 5 Probe Assembly. Cus-tom order lengths and materials are also available. Please specify liner material when ordering.

unheated probe liner:• Liner Connection - 28/12 ball joint,

28/12 ball joint o-ring, 4/35 male taper or 5/8” chamfered end.


Part number Item9603 Stainless Steel Ball-Joint with or without O-ring9604 Stainless Steel Socket Joint

Metho

d 5Me

thod 5

Metho

d 5

1-25

Replacement Pitot for Probe Assemblies

Method 5 Probe Rewrap Kits

Stainless Steel Port Adapter Seal Assembly

Thermocouple and O-Rings for Probe LinerPart number Item

031518 Thermocouple for Probe Liner 05750SSO O-Ring Small Silicone Glassware E Size 116 (Amber) 05750STO O-Ring Small PTFE Glassware E Size 116 (Blue)




Part number Item0140 Port Adaptor Seal Assembly. 2” NPT01404 Port Adaptor Plate – 4” Flange01406 Port Adaptor Plate – 6” Flange

01404SP 4” Dia. Silicon PlugFor use with CleanAir Express sheathed Method 5 probe.

Part number Item01492 Silicone Heater for 2’ Effective Probes01495 Silicone Heater for 3’-5’ Effective Probes01496 Silicone Heater for 6’ Effective Probes01499 Silicone Heater for 7’-9’ Effective Probes014914 Silicone Heater for 10’ Effective Probes0150-2 Rewrap Kit for 2’-10’ Effective Probes

0150-12 Rewrap Kit for 12’-20’ Effective ProbesKits include heating element, tape and connectors.

Part number material Item0304-P- (S), (I), (T) 4’ Replacement Pitot0306-P- (S), (I), (T) 6’ Replacement Pitot0308-P- (S), (I), (T) 8’ Replacement Pitot0310-P- (S), (I), (T) 10’ Replacement Pitot0312-P- (S), (I), (T) 12’ Replacement Pitot

Geometric calibration included with replacement pitot. Note: Lengths indicate effec-tive length. To determine overall length add 6”. Custom order lengths are also avail-able. *Materials of construction: (S) stainless steel (I) Inconel (T) Titanium

Method 5Method 5

Method 5

1-26

Sample Recovery Kit

Probe Rod Kits and Probe Wash Bottles

Sample Containers




Part number Item

0156

sample recovery kit for 10’ probe contains:• (1) 10’ Probe Rod Kit• (5) Nozzle Brushes• (2) 500 ml Wash-Bottles• (12) 250 ml Polyethylene Sample Bottles

0157

sample recovery kit for 15’ probe contains:• (1) 15’ Probe Rod Kit• (5) Nozzle Brushes• (2) 500 ml Wash Bottles• (12) 250 ml Polyethylene Sample Bottles

Probe Rod KitsPart number Item

0151-5 5’ Probe Rod Kit0151-10 10’ Probe Rod Kit0151-15 15’ Probe Rod Kit0151-20 20’ Probe Rod Kit0155-N Nylon Brush0155-T Teflon® Patch

Part number ItemAmberBottleswithTeflon® liner

0600 250 ml Bottle, Case of 120601 500 ml Bottle, Case of 120602 950 ml Bottle, Case of 12

AmberBottleswithTeflon® liner0603 250 ml Bottle, Case of 720604 500 ml Bottle, Case of 48

Probe Wash BottlesPart number Item

0600-W 500 ml Poly Wash Bottle0603 250 ml Poly Wash Bottle

0602-W 500 ml Teflon® Wash Bottle

Kit includes Teflon® rod with rod guide and nylon brush. Brushes can be ordered separately.

Metho

d 5Me

thod 5

Metho

d 5

1-27

Method 5 Umbilical Cable

Isokinetic Sampling Nozzle Accessories




Part number ItemStandard

0360-25 25’ Length0360-50 50’ Length

0360-100 100’ LengthWith quick connect

0360-25QC 25’ Length0360-50QC 50’ Length

0360-100QC 100’ Length

Lightweight umbilical line constructed of one gum rubber line, two polyvinyl pitot lines, one five-conductor electrical line, and five ther-mocouple extension wires. All sheathed in a durable flexible nylon mesh. Available with or without stainless steel quick connects.

nozzle accessoriesPart number Item

0421TU 5/8” Teflon® Union0421TRU 5/8”-1/2” Teflon® Reducing Union0421SRU 5/8”-1/2” Stainless Steel Reducing Union0421TF 5/8” Teflon® Ferrules0421G 5/8” Graphite Ferrules

0421SU 5/8” Stainless Steel Union0430 Nylon Nozzle Brush

99451100 Nozzle Case

Method 5Method 5

Method 5

1-28

Isokinetic Sampling Nozzles




CleanAir Express Isokinetic Sampling Nozzles are available in Pyrex, Quartz, Stainless Steel, or Inconel. When using quartz or Pyrex nozzles, we suggest using a Teflon® union. Please specify material when ordering.

nozzles are available in the following materials: Pyrex (P), Quartz (Q), 316 Stainless Steel (S), Inconel (I), Tapered Quartz and Tapered Pyrex.

Button Hook nozzle with 5/8” ShankPart number material nozzle Size

0401 (P), (Q), (S), (I) 1/8”0402 (P), (Q), (S), (I) 3/16”0403 (P), (Q), (S), (I) 1/4"0404 (P), (Q), (S), (I) 5/16”0405 (P), (Q), (S), (I) 3/8”0413 (P), (Q), (S), (I) 7/16”0406 (P), (Q), (S), (I) 1/2"

Button Hook nozzle with 14/35 Female taperPart number material nozzle Size

N04T- (P), (Q) 1/8”N06T- (P), (Q) 3/16”N08T- (P), (Q) 1/4"N10T- (P), (Q) 5/16”N12T- (P), (Q) 3/8”N14T- (P), (Q) 7/16”N16T- (P), (Q) 1/2"

Button Hook nozzle Sets with 5/8” ShankPart number material nozzle Size

NS7- (P), (Q), (S), (I) 1/8,3/16,1/4,5/16,3/8,7/16,1/2Button Hook nozzle Sets with 14/35 Female taper

Part number material nozzle SizeNS7T- (P), (Q) 1/8,3/16,1/4,5/16,3/8,7/16,1/2

Metho

d 5Me

thod 5

Metho

d 5

1-29

Method 5 Glassware

Glassware Shipping Case




# 05003 method 5 3” 28/12 Ball Joint glassware Set Includes qty Part number Item1 0509B 3” Filter Assembly with Clamp Ring and Glass Frit1 0506L Double “L” Connector1 0504 Cyclone Bypass1 05755 Impinger Assembly3 05750 Modified Impinger Assembly3 0505 180° Tube Connectors 11 0507 Ball Joint Screw Clamps

# 05003B method 5 3” 28/12 Ball Joint o-ring glassware Set Includes qty Part number Item1 0509BTFE 3” Filter Assembly with Clamp and Teflon® Frit1 0506L Double “L” Connector1 0504 Cyclone Bypass1 05755 Impinger Assembly3 05750 Modified Impinger Assembly3 0505 180° Tube Connectors 11 0507 Ball Joint Screw Clamps

# 05004 method 5 4” 28/12 Ball Joint glassware Set Includes qty Part number Item

1 0501 4” Filter Assembly with Clamp Ring and Glass Frit1 0506L Double “L” Connector1 0504 Cyclone Bypass1 05755 Impinger Assembly3 05750 Modified Impinger Assembly3 0505 180° Tube Connectors 11 0507 Ball Joint Screw Clamps

Part number Item99451650 Shipping Case for One Set of M5 Glassware

*Note: Custom designed shipping cases are available for all Glassware sets.

*Case Not Included

*With pre-cut pick and pluck foam inserts

Method 5Method 5

Method 5

1-30

Cateco Method 5 Glassware

Method 5 Glassware Diagram

Filter Outlet28/12 #0509M

180 Deg. Connector#0505

Standard ImpingerAssembly #05750

Modified ImpingerAssembly #05750


Impinger Bottle Only#0575B

Modified ImpingerInsert Only#05750I

Standard ImpingerInsert Only#05750I


Cyclone Bypass28/12 #0504

Cyclone28/12 #0504C

Screw Clamp28/12 #0507

125 ml Flask28/12 #0504F


Assembly #05750Modified Impinger



Assembly #05755Standard Impinger





Filter Inlet 90 Deg.28/12 #0509F

3" Frit - 2 Options Glass #0509GTeflon #0509T

3" Clamp Ring#0509CR

3" M5 Filter Assembly28/12 # 0509BTFE

3" Frit Glass #0509GTeflon #0507T

Cateco Filter Inlet 28/12 #0038I

Cateco Filter Outlet28/12 #0038O


3" Cateco M5 Filter Assembly28/12 # 0037

Thermowell

Thermowell3" Clamp Ring

3" Clamp Ring

Method 5 Glassware

Cateco Method 5 GlasswareFilter Outlet28/12 #0509M



Modified ImpingerAssembly #05750






Cyclone Bypass28/12 #0504

Cyclone28/12 #0504C


125 ml Flask28/12 #0504F





Assembly #05755Standard Impinger





Filter Inlet 90 Deg.28/12 #0509F

3" Frit - 2 Options Glass #0509GTeflon #0509T


3" M5 Filter Assembly28/12 # 0509BTFE

3" Frit Glass #0509GTeflon #0507T

Cateco Filter Inlet 28/12 #0038I

Cateco Filter Outlet28/12 #0038O


3" Cateco M5 Filter Assembly28/12 # 0037

Thermowell

Thermowell3" Clamp Ring

3" Clamp Ring

Method 5 Glassware

Cateco Method 5 Glassware CleanAir® ExpressA Division of CleanAir® Engineering



# 0500c method 5 cateco 28/12 Ball Joint glassware Set Includes qty Part number Item1 05755 Impinger Assembly 3 05750 Modified Impinger Assembly3 0505 180° Connectors1 0508 #28 Socket - 3/8” Hose barb9 0507 Ball Joint Screw Clamps

#0500Bc method 5 cateco 28/12 Ball Joint o-ring glassware Set Includes qty Part number Item1 05755 Ball-Joint O-ring Impinger Assembly 3 05750 Modified Ball-Joint O-ring Impinger Assembly3 0505 180° Connectors1 0508 #28 Socket - 3/8” Hose barb9 0507 Ball Joint Screw Clamps

*Filter for Cateco Set sold separately #0037

Metho

d 5Me

thod 5

Metho

d 5

1-31

Individual Ball Joint Glassware and Clamps

Teflon® Impingers, Connectors and Filter Holders




28/12 Ball Joint o-ringPart number Item

05750 Impinger with Modified Insert05750I Modified Impinger Insert Only0575B Impinger Bottle Only05755 Impinger Assembly with Standard Insert05755I Standard Impinger Insert Only0504 Cyclone Bypass

0504T Cyclone Bypass with Thermocouple Port0504-C Cyclone (Not Shown)0504-F 125 ml Flask (Not Shown)0505 180º Tube Connector0506 90º Tube Connector (Not Shown)

0506-L Double “L” Connector0507 Screw cCamp 28/120508 Socket to 3/8” Hose Barb Connector0510 Filter Bypass

Part number Item Part number Item0553 375 ml Impinger with ½” Ports 0552-L 90º Bend (Long)

0553-T Transfer Cap 0552-S 90º Bend (Short)0554 600 ml Impinger with 5/8” Ports 0550 180º Tube Connector

0554-T Transfer Cap 0551 2.3 mm Orifice Tip (1/2” tubing)0558 47 mm Teflon® Filter Holder

0575

0

0575

0I

0575

B

0575

5

0575

5I

0504T 0508

0506-L 0507

0505 0510

0504

Method 5Method 5

Method 5

1-32

Filter Holder Assembly




4” Filter Holder 28/12 glass Ball Joint o-ringPart number Item

0501 4” Filter Assembly (Complete)0501-F 4” Filter Inlet (90 Deg. Elbow 28/12 Ball Joint Socket)0501-M 4” Filter Outlet0501-G 4” Glass Frit0501-T 4” Teflon® Frit

0501-CR 4” Clamp Ring3” Filter Holder 28/12 glass Ball Joint with o-ring

Part number Item0509-B 3” Filter Assembly (Complete)0509-F 3” Filter Inlet (90 Deg. Elbow 28/12 Ball Joint Socket)0509-M 3” Filter Outlet0509-G 3” Glass Frit0509-T 3” Teflon® Frit

0509-CR 3” Clamp Ring3” cateco Filter Holder 28/12 glass Ball Joint with o-ring

Part number Item0037 3” Cateco Filter Assembly (Complete)

0038-I 3” Filter Inlet (28/12 Ball Joint Cup)0038-O 3” Filter Outlet0509-G 3” Glass Frit0509-T 3” Teflon® Frit

0509-CR 3” Clamp Ring3” Stainless Steel Filter Holder

Part number Item00368 3” SS Filter Assembly (Complete)

0560-I1 3” SS Filter Inlet (28/12 Ball Joint Cup)0560-O1 3” SS Filter Outlet 0509-G 3” Glass Frit0509-T 3” Teflon® Frit

0509-CR 3” Clamp Ring

0501

0509-B

0037

00368

0501-F

0509-F 0038-I 0560-I1 0560-O1 0509-M

0501-M

0509-G

0501-G

0509-T

0501-T

0509-CR

0501-CR

Metho

d 5Me

thod 5

Metho

d 5

1-33

Tared Filter Media




Description Price8.26 cm Dia. 934AH Glass Fiber $25.008.26 cm Dia. QAT UP Quartz Fiber $30.008.26 cm Dia. Teflon® Fiber $30.004.7 cm Dia. 934AH Glass Fiber (with SS Gaskets) $25.004.7 cm Dia. QAT UP Quartz Fiber $30.004.7 cm Dia. Teflon® Fiber $30.008” x 10” 934AH Glass Fiber $30.008” x 10” QAT UP Quartz Fiber $35.00M17 Alundum Thimbles $100.0037 mm Acetate $25.00

Our laboratories are staffed by professionals who em-ploy comprehensive quality control measures to assure the highest quality results, guaranteed. We’re committed to serving our customers with the highest value possible. Our unique experience, gained from over 30 years of environmental sampling and analysis, has placed us among the leaders in our field. We continuously refine existing methods while developing new test procedures to meet the ever-changing needs of our valued clients.

cleanair laboratory Facility overview Our labs are housed in a custom building incorporating state-of-the-art laboratory features including a specially designed climate control system for optimal instrument performance.

Method 5Method 5

Method 5

1-34

Filters - Glass, Quartz and Teflon®




CleanAir Express Filters are available in a variety of ma-terials and sizes. Different filter materials are used for various types of method testing. If you are unsure which kind of filter media to purchase, call your CleanAir Ex-press Customer Service Representative.

Filters are available in the following materials: Glass, Quartz, Teflon® (Sizes specified in table below.)

Filter Size Part numberglass quartz Teflon®

37 mm (100ct.) n/a 0618Q n/a47 mm (100ct.) 0620 0620Q 0620T10 cm / for 4” Filter Holder (100ct.) 0610 n/a n/a8.26 cm / for 3” Filter Holder (100ct.) 0621.26 0621.26Q 0621.26T11 cm (100ct.) 0622 (100ct.) 0622Q (25ct.) 0622T (100ct.)8x10 (100ct.) 0623 (100ct.) 0623Q (25ct.) 0623T (25ct.)

Technical note: Do not use glass filters if hydrofluoric acid or fluorine compounds are present, as they may etch the glass.

Part number Item0635 Glass Filter Substrate Set (900°F)

0635Q Quartz Filter Substrate Set (1652°F)Filter Substrate Set Includes:

0634 0634Q Filter Substrate Filter for Quartz Substrate06351 06351Q Filter 6.35 cm Glass Filter for 6.4 cm Quartz

0622PL Pan Liners0622PD 15 cm Petri Dish

• CleanAir Source does not use glass fiber filters:• Quartz filters are a glass fiber• Quartz filters can replace glass fiber filters but glass fiber filters can not replace quartz filters.

Metho

d 6Me

thod 6

Metho

d 6

1-35

Method 6 / Vost Control Console

Method 6 Train Diagram

CLEAN AIR EXPRESS212 WOODWORK LANE

PALATINE IL 60067TESTINGTESTINGTESTING

5/28/14

M-6 DIAGRAM

ATESTING




The Model 80 Control Console is a light, compact unit designed to perform EPA methods 6, 6a, 6b, 15, 18, 26 and VOST. This unit is suitable for use with any low flow sampling method that requires accurate volume measurement. This rugged lightweight console features built in digital temperature control and indication, vacuum and pressure gauges, dual float rotometer, stainless steel fine and coarse valves and internal diaphragm vacuum pump.

Part number 0080

Specifications• Sample Pump: Internal Diaphragm Vacuum Pump• Dry Gas Meter: S-275 L/rev. • Rotometer: Dual Float Glass - 1.24 lpm and 2.54 lpm• Timer: Digital LCD w/ Battery Backup (Displays h, m, s)• Umbilical Power Input Connection: Amphenol 4-pin• Auxiliary Power Output Connection: 3 pin 120 V receptacle• Circuit Protection: Panel Mounted Circuit Breaker Switches• Sample Inlet Connection: 1/4” Stainless Steel Quick-Connects• Temperature Controllers: Solid State for Probe & Filter• Temperature Monitor: LED readout w/ Four-Position Switch• Thermal Couple Connection: K-Type Miniature Panel Mount• Cabinet: 0.095” Welded Aluminum w/ Quick-Release Access

Doors• External Dimensions (h x w x d): 14” x 14” x 11” (356 mm x 356

mm x 279 mm)• Weight: 30 lbs. (13.6 kg)

Method 6Method 6

Method 6

1-36

Method 6 / Vost Control Console Shipping Case

Method 6 Midget Sample Unit





Part number Item0080VC Vost Meter Box Shipping Case

The control console shipping case includes pre-cut pick and pluck foam inserts. Pro-tects meter and pump from shipping damage.

Part number Item0065 Midget Sample Unit0066 Midget Impinger Tray0067 Midget Impinger Tray Holder

Midget sample unit comes complete with aluminum probe support arm; adjustable probe support arm slide; and insulated impinger tray.

Part number ItemStandard

0362-10 10’ Umbilical Cable0362-25 25’ Umbilical Cable0362-50 50’ Umbilical Cable

With quick connect0362-10QC 10’ Umbilical Cable0362-25QC 25’ Umbilical Cable0362-50QC 50’ Umbilical Cable

CleanAir Express M-6 umbilicals are constructed of one (1) one pvc line (with optional quick connect), three (3) type-K thermocouple lines; and one (1) electrical power line, all wrapped in a durable flexible nylon mesh material. Stain-less steel quick connects available.

Metho

d 6Me

thod 6

Metho

d 6

1-37

Method 6 Glassware Accessories

Method 6 Midget Individual Glassware




Part number Item0034-6 Impinger Outlet0066 Midget Impinger Tray0067 Midget Impinger Tray Holder

Part number Item0523 Midget Modified Impinger Assembly

0523-I Midget Modified Impinger Insert0524 Midget Impinger Assembly

0524-I Midget Impinger Insert0524-B Midget Bottle0525 Midget 90º Connectors0526 Midget 180º Connectors0527 Pinch Clamp0528 28/12 to 12/5 Socket Adapter

0523

0523

I

0524

0524

I

0524

B

0528

0526

0527

0525

Method 6Method 6

Method 6

1-38

Midget Impinger Set

Method 6 Heated Sampling Probe




# 050012 the midget Impinger Set Includesqty Part number item1 0524I Midget Ball-Joint O-ring Insert (Std.)3 0523I Midget Ball-Joint O-ring Insert (Mod.)1 0525 Midget 90’ Connectors3 0526 Midget 180’ Connectors8 0527 Midget 12/5 Pinch Clamps4 0524B Midget Impinger Bottle

The Midget Glassware Set includes all components for Method 6, 26, and more. *Filter sold separately

12/5 Ball Joint With o-ring connectionItem Part number

Pyrex quartz 316 Stainless Steel2’ Probe 0102-6-BP 0102-6-BQ 0102-6-BS3’ Probe 0103-6-BP 0103-6-BQ 0103-6-BS4’ Probe 0104-6-BP 0104-6-BQ 0104-6-BS5’ Probe 0105-6-BP 0105-6-BQ 0105-6-BS6’ Probe 0106-6-BP 0106-6-BQ 0106-6-BS

1” stainless steel outer sheath with internal heating element liner and type-K probe thermocouple. Probe liners are available in 316 stainless steel, quartz and Pyrex. Also available in 240V configuration.

Metho

d 8Me

thod 8

Metho

d 8





The controlled condensation system consist of:qty Part number So3 Probes and liners

1 Probe1 LinerSpare Liners Recommended

0514P 4 ft. Stainless Steel Heated Probe (600 °F) with 4 ft. Quartz Liner0516P 6 ft. Stainless Steel Heated Probe (600 °F) with 6 ft. Quartz Liner0518P 8 ft. Stainless Steel Heated Probe (600 °F) with 8 ft. Quartz Liner05164 4 ft. Stainless Steel Heated Probe (600 °F) with Cable Heater, No Liner05161 6 ft. Stainless Steel Heated Probe (600 °F) with Cable Heater, No Liner

051618 8 ft. Stainless Steel Heated Probe (600 °F) with Cable Heater, No Liner05501 4 ft. Quartz Glass Probe Liner 18/9 Ball Joint05502 6 ft. Quartz Glass Probe Liner 18/9 Ball Joint05507 8 ft. Quartz Glass Probe Liner 18/9 Ball Joint

qty Part number So3 Sample train glassware and connectors1 05504 Quartz 90° Connector 18/9 Ball & Socket Joint1 05503 Quartz Glass Filter Holder 18/9 Ball & Socket Joint

1 Water Bath1 Condenser Tube

05162 Temperature Regulated Water Bath (150 °F) with Quartz Glass Condenser Tube05162A Temperature Regulated Water Bath (150 °F) No Condenser Tube05505 Quartz Glass Condenser Tube 18/9 Socket Joint

2 05503S Filter Holder Springs1 0618Q 37 mm Quartz Filter Media 100/pk3 050718 18/9 Glassware Clamps1 9905 Quartz Glass Wool1 05503P 18/9 Ball Joint Plug (for leak checking)1 05503HB 18/9 Ball Joint to ¼” Hose Barb1 05503PMP Purge Pump1 0419T 1/2”x3/8” Teflon® Reducing Union

10 ft. 0769375 3/8” Teflon Tubing1 05503IB 28/12 Socket to ¼” Hose Barb4 05750 Impinger with Modified Stem (straight)4 0505 180° Connector 28/12 Socket

qty Part number So3 Hardware1 051621 SO3 Heated Filter Box (550 °F) 1 0725RNT Universal Temperature Controller 1 0028 Method 5 Control Console and Pump1 0033 4 Impinger Compartment1 0034 28/12 Impinger Outlet

1051615QC 15 ft. SO3 Electrical Umbilical051650QC 50 ft. SO3 Electrical Umbilical

1051515 15 ft. SO3 Sample Umbilical051550 50 ft. SO3 Sample Umbilical

Method 8Method 8

Method 8

1-40

8A & SO3 Controlled Condensation System Diagram

VACUUM

PRESSURE

PROBE

A

XU

PUMP

LOOSEN

P

VACUUM

UM

P

1STACK OUTLETPROBE

2FILTER

3 4

IMP.AUXILIARY

5

FILTER

POWER

AMBIENT TEMP.AUXILIARYDGM. OUTLET

IMP. OUTLETDGM. INLET

STACK

PUMP VALVES + LEAK CHECK

-

+

PITOT

INLETSAMPLE

I.G.S.

FLOW CONTROL

OPEN

COARSE

CLOSE

FINE

SEC.MIN. RESET

STOP

START




Metho

d 8Me

thod 8

Metho

d 8

1-41

8A & SO3 Heated Filter Box

8A & SO3 Probes and Liners




Part number So3 Probes and liners0514P 4 ft. Stainless Steel Heated Probe (600 °F) with 4 ft. Quartz Liner0516P 6 ft. Stainless Steel Heated Probe (600 °F) with 6 ft. Quartz Liner0518P 8 ft. Stainless Steel Heated Probe (600 °F) with 8 ft. Quartz Liner05164 4 ft. Stainless Steel Heated Probe (600 °F) with Cable Heater, No Liner05161 6 ft. Stainless Steel Heated Probe (600 °F) with Cable Heater, No Liner

051618 8 ft. Stainless Steel Heated Probe (600 °F) with Cable Heater, No Liner05501 4 ft. Quartz Glass Probe Liner 18/9 Ball Joint05502 6 ft. Quartz Glass Probe Liner 18/9 Ball Joint05507 8 ft. Quartz Glass Probe Liner 18/9 Ball Joint

so3 probe includes:• Type K probe liner thermocouple with standard male plug• Type K stack thermocouple with standard male plug• Stainless Steel Sheath*Power Requirement: 120V AC or 240V configurations are available.

Part number Item051621 SO3 Heated Filter Box (550 °F)

The CleanAir Express SO3 Controlled Condensation System is de-signed to allow the separation of H2SO4 from SO2 by cooling the gas stream below the dew point of H2SO4 but above the H2O dew point. Applicable for method 8A Determination of Sulfuric Acid Vapor or Mist (including Sulfur Trioxide) and Sulfur Dioxide Emissions from Kraft Recovery Furnaces. The condenser utilizes a straight quartz tube filled with quartz wool surrounded by a temperature regulated water bath. No recirculation pump or external water heaters are re-quired. The system works in conjunction with standard Method 5 Iso-kinetic Control Consoles and Heater Controllers. Temperature Regu-lator Water Bath sold separately.

Method 8Method 8

Method 8

1-42

8A & SO3 Sample Train Glassware and Connectors




Part number So3 Sample train glassware and connectors05504 Quartz 90° Connector 18/9 Ball & Socket Joint05503 Quartz Glass Filter Holder 18/9 Ball & Socket Joint05162 Temperature Regulated Water Bath (150 °F) with Quartz Glass Condenser Tube

05162A Temperature Regulated Water Bath (150 °F) No Condenser Tube (not shown)92842A Bored out S.S. Nut and Kynar Fitting 1/2” tube x 1/2” Npt with Teflon Ferrule05505 Quartz Glass Condenser Tube 18/9 Socket Joint

05503S Filter Holder Springs0618Q 37 mm Quartz Filter Media 100/pk (not shown)050718 18/9 Glassware Clamps9905 Quartz Glass Wool

05503P 18/9 Ball Joint Plug (for leak checking) 05503HB 18/9 Ball Joint to ¼” Hose Barb

05503PMP Purge Pump (not shown)0419T 1/2”x3/8” Teflon® Reducing Union

0769375 3/8” Teflon® Tubing (not shown)05503IB 28/12 Socket to ¼” Hose Barb05750 Impinger with Modified Stem (straight)0505 180° Connector 28/12 Socket

0516

2

0550405

750

0550

5

05503IB

0419T05503HB05503P9905

05071805503S05503

050592842A

Metho

d 17

Metho

d 17

Metho

d 17

1-43

Method 17 Probes with Removable Liner

Nozzles, Filter Holders and Associated Items

Method 17 Umbilical Cables

Method 17 Probes




Part Number Description036125 25’ Method 17 Umbilical Cable036150 50’ Method 17 Umbilical Cable036175 75’ Method 17 Umbilical Cable0361100 100’ Method 17 Umbilical Cable

*Add QC to end of part number for Stainless Steel Quick connects

Part number Item Part number Item0102-17 2’ Stainless Steel M-17 Probe 0108-17 8’ Stainless Steel M-17 Probe0103-17 3’ Stainless Steel M-17 Probe 0109-17 9’ Stainless Steel M-17 Probe0104-17 4’ Stainless Steel M-17 Probe 0110-17 10’ Stainless Steel M-17 Probe0105-17 5’ Stainless Steel M-17 Probe 0111-17 11’ Stainless Steel M-17 Probe0106-17 6’ Stainless Steel M-17 Probe 0112-17 12’ Stainless Steel M-17 Probe0107-17 7’ Stainless Steel M-17 Probe

CleanAir Express Method 17 probes feature Stainless Steel Construction, Sample Drier, Calibrated “S” Type Pitot and Type “K” Probe and Stack Thermocouple.

Part number Item Part number Item0594 30x100 Alundum Filter Holder 0400NS Stainless Steel Nozzle Set0595 30x100 Alundum Thimble O500317 M-17 Glassware Set0596 Shepherd Hook 0500 Knock –Out Jar set0561 47 mm Filter Holder

Part # Item Part # Item Part # Item1172H 2’ Heated M-17 Probe 11710H 10’ Heated M-17 Probe 1177 7’ Unheated M-17 Probe1173H 3’ Heated M-17 Probe 11711H 11’ Heated M-17 Probe 1178 8’ Unheated M-17 Probe1174H 4’ Heated M-17 Probe 11712H 12’ Heated M-17 Probe 1179 9’ Unheated M-17 Probe1175H 5’ Heated M-17 Probe 1172 2’ Unheated M-17 Probe 11710 10’ Unheated M-17 Probe1176H 6’ Heated M-17 Probe 1173 3’ Unheated M-17 Probe 11711 11’ Unheated M-17 Probe1177H 7’ Heated M-17 Probe 1174 4’ Unheated M-17 Probe 11712 12’ Unheated M-17 Probe1178H 8’ Heated M-17 Probe 1175 5’ Unheated M-17 Probe1179H 9’ Heated M-17 Probe 1176 6’ Unheated M-17 Probe

CleanAir Express Method 17 Probes feature Stainless Steel construction, Silicone Heating Element, Calibrated “S” Type Pitot, Stainless Steel Probe Liner, Stainless Steel Union and Type “K” Probe and Stack Thermocouples.*Standard lengths available up to 20’ call your CleanAir representative for price and availability

CleanAir Express Method 17 Um-bilical Cables feature highly flexible 3/8” ID Gum Rubber Tubing, PVC Pitot Lines, 2 Type “K” Thermocou-ple Extension Wires with Standard Plugs

CleanAir Express carries an extensive line of sampling accessories to help complete your projects. Our large inventory allows us to ship any of these items overnight to your testing location.

Method 17Method 17

Method 17

1-44


-

250

250

8888

250


180 Deg. Connector 28/12#0505




Method 17 Umbilical Cable Extension

Socket to Hose BarbConnector 28 \12

#0508


47 mm SS In-Line Filter Holder#0561

30 mm x 100 mm SS Thimble Holder#0594

SS Nozzle Unheated Method 17 Probe

Offset Type S Pitot Tube

SS Shepards Hook (For vertical Sampling)*0104S17

Standard Type S Pitot Tube

Knock Out Jars #(Alternate M17 Glassware)


Rubber Stopper#0611




0500

Metho

d 23

Metho

d 23

Metho

d 23


1-45

Part number 0100-23




The CleanAir Method 23 Train is suited to perform testing for Polychlorinated Dibenzo-P-Dioxins and Polychlorinated Dibenzofurans from Stationary Sources. Other pollutants can be collected in the impinger portion of the system providing the proper reagent is utilized. Part number Item

0028 Isokinetic Control Console with Pump0032 Sample Oven Compartment0030 Impinger Compartment

050023S Method 23 Glassware Set Ball Joint or Ball Joint O-ring0034 Stainless Steel Impinger Outlet

036050QC 50’ Umbilical Cable with Stainless Steel Quick Connects0106BP 6’ Stainless Steel Heated Method 5 Probe with Glass Liner and Geometric Calibration Report

0140 Stainless Steel Probe Port Adaptor Seal Assembly0400NP Complete Set of Borosilicate Nozzles (1/8”, 3/16”, 1/4", 5/16”, 3/8”, and 1/2") with nuts and ferrules


9900 Recirculation Pump 120V (Submersible)0030R2B Impinger Bottle Rack (Impingers sold separately)


• Power Requirement: 120V and 240V configurations in stock• Thermocouple Connections: Type K• Cabinets: Welded Aluminum Detachable/Stackable Meter and Pump• Temperature Controllers: Solid State with 6 Channel Selector• *Method 23 Train Components Also Sold Separately

Method 23Method 23

Method 23


1-46

250

250

250

8888








M5 Sample Oven#0032




Monorail Support

Stack Wall


MM-5 Hybrid Bottle28/12 #05682

Method 5 Umbilical

Recirculation Pump#9900

Sorbent Trap 28/12 #0517B

Coil Condense28/12 #0516B

"S" Connector28/12 #0532B




Metho

d 29

Metho

d 29

Metho

d 29

1-47

Part number 0100-29





The CleanAir Method 29 Train is suited to perform testing for Metals Emissions from Stationary Sources. Other pollutants can be collected in the impinger portion of the system providing the proper reagent is utilized.

Part number Item0028 Isokinetic Control Console with Pump0032 Sample Oven Compartment0030 Impinger Compartment

050029 or 050029M Method 29 Glassware Set Ball Joint or Ball Joint O-ring (050029M = Mercury Metals Glassware Set)

0034 Stainless Steel Impinger Outlet036050QC 50’ Umbilical Cable with Stainless Steel Quick Connects

0106BP 6’ Stainless Steel Heated Method 5 Probe with Glass Liner and Geometric Calibration Report0140 Stainless Steel Probe Port Adaptor Seal Assembly

0400NP Complete Set of Borosilicate Nozzles (1/8”, 3/16”, 1/4", 5/16”, 3/8”, and 1/2") with nuts and ferrules 0158 Sample Recovery Kit

0621.26 8.26 cm Glass Fiber Filters (Box of 100)0030R2B Impinger Bottle Rack (Impingers sold separately)


*Tapered or Barrel style liners and nozzles are stock items• Power Requirement: 120V and 240V configurations in stock• Thermocouple Connections: Type K• Cabinets: Welded Aluminum Detachable/Stackable Meter and Pump• Temperature Controllers: Solid State with 6 Channel Selector

Method 29Method 29

Method 29


1-48

250

250

250

8888








M5 Sample Oven#0032



Method 5 Umbilical

Isokinetic Control Consol#0028

Monorail Support

Stack Wall



(Optional) Short Stem Impinger Assembly

28/12 #05507S




Metho

d 30B

Metho

d 30B

Metho

d 30B

Method 30B Sample Console with Digital Display

1-49

Kimmon N1 Dry Gas Meter




The purpose of Method 30B is to measure total vapor phase mer-cury (Hg) emissions from coal fired sources. Knowledge of Meth-ods 1, 4, and 5 is recommended. The testing should be done after the stack gas has passed through all pollution control devices, i.e. with a stream that is low in particulates. Method 30B is used to test the accuracy of current vapor phase Hg constant emissions monitoring systems (CEMS) and can also be used to test for the compliance of mercury emissions standards. The method requires a minimum of two simultaneous sampling trains.

Part number 1030

Specifications• Sample Pump: Internal Diaphragm Vacuum Pump• Dry Gas Meter: S-275 L/rev. • Rotometer: Dual Float Glass - 1.24 lpm and 2.54 lpm• Timer: Digital LCD w/ Battery Backup (Displays h, m, s)• Umbilical Power Input Connection: Amphenol 4-pin• Auxiliary Power Output Connection: 3 pin 120 V receptacle• Circuit Protection: Panel Mounted Circuit Breaker Switches• Sample Inlet Connection: 1/4” Stainless Steel Quick-Connects• Temperature Controllers: Solid State for Probe & Filter• Temperature Monitor: LED readout w/ Four-Position Switch• Thermocouple Connection: K-Type Miniature Panel Mount• Cabinet: 0.095” Welded Aluminum w/ Quick-Release Access

Doors• External Dimensions (h x w x d): 14” x 14” x 11” (356 mm x

356 mm x 279 mm)• Weight: 30 lbs. (13.6 kg)

Part number Item9826 Kimmon N1 Dry Gas Meter

1080DGMA2 Mehthod 30B Dry Gas Meter Assembly with Optical Encoder

Kimmon N1 gas meters are available for use in many of today’s systems. The Kim-mon N1 dry gas meter is replacing the SK25 dry gas meter used in the Method 30B control console. CleanAir Express can also rebuild and calibrate your present meter control console.

Method 30BMethod 30B

Method 30B

Method 30B Heated Probe Train Diagram

1-50

Method 30B Unheated Probe Train Diagram




Metho

d 30B

Metho

d 30B

Metho

d 30B

Method 30B Air Cooled Probe

1-51

MET 30B Probe




CleanAir Express Air Cooled Method 30B Heated Sampling Probes feature a unique stainless steel sheathed design that allows quick and easy replacement of speciated sorbent traps, stack thermocouple, probe thermocouples, and trap thermocouples. The Air Cooled Probe heaters are designed to heat each trap independently. Procedures similar to EPA Method 30B for sorbent tube sampling and commonly re-ferred to the FAMS method will be used for sampling of gas-eous mercury, including speciation of elemental (Hg0) and oxidized (Hg2+) forms at the FGD Inlet location. Known vol-umes of flue gas will be extracted from a single point in the flue and passed through paired mercury speciation sorbent traps utilizing potassium chloride-coated quartz and iodated powdered activated carbon. The trap is heat-controlled to 95°C ±5°C. Glass liners will extend from the traps into the stack flue gas.

Specifications• Traps Size: 10 mm x 450mm• Inlet/Outlet: 2 x 3/4” Hose Connection• Heaters: Cable Heaters

Part number Item10304PE MET 30B 4’ Probe Extension10306PE MET 30B 6’ Probe Extension10308PE MET 30B 8’ Probe Extension103010PE MET 30B 10’ Probe Extension10304HH MET 30 Heated Quad Head10304UH MET 30 Unheated Quad Head

CleanAir Express Method 30B Heated Sampling Probes feature a unique sheathed design that allows quick and easy replacement of sorbent traps, stack thermocouple, and heated and unheated sample line connections. The universal quad head has the advan-tage of using either 6 mm O.D. or 10 mm O.D. traps!

* 10 mm and 6 mm traps available

Part number Item1030P06AC MET 30B 6’ Air Cooled Probe1030P08AC MET 30B 8’ Air Cooled Probe1030P10AC MET 30B 10’ Air Cooled Probe

Method 30BMethod 30B

Method 30B

Method 30B Umbilical Extension

Method 30B Impinger/Condenser Assembly

Method 30B Calibration Kit

Method 30B Heated and Unheated Umbilical/Probe Assembly





Part number Item1030UE10A Umbilical Extension 10’ Blue/Green1030UE10B Umbilical Extension 10’ Red/Yellow

CleanAir Express Method 30B umbilical extensions are constructed of three (3) type-K thermocouple lines and two (2) teflon lines (with quick connects) all wrapped in a durable flexible nylon mesh mate-rial.

CleanAir Express Method 30B calibration kit includes three orifice sets with fittings, hardware and case. The orifices sizes include: 0.5 liters/minute, 1.0 liters/minute, and 2.0 liters/minute.

Part number Item050030 Impinger/Condenser Assembly

*One set includes three bottles. Two sets are needed to test dual traps.

Part number Item1030CK Method 30B Calibration Kit

Part number Item1030U25 25’ Unheated Umbilical/Probe

980183030B 25’ Heated Hose/Probe

Metho

d 30B

Metho

d 30B

Metho

d 30B

Method 30B RATA Short-Term Sorbent Traps





Rata Short-term traps for method 30B console, 10mm glass

Description Size: o.D. x l Sections Sorbent/Section

color of Ends caps Spike (ng) Part number

• unspiked• Extra Durable Glass• Activated Iodinated Carbon• Individual ID

10 x 185 mm 2 300 mg Yellow • None • 226-239

• Vapor-spiked• Extra Durable Glass• Activated Iodinated Carbon• Individual ID• Spiked with Mercury for QAQC per Method

10 x 185 mm 2 300 mg Blue Yellow

• 20• 50• 100• 150• 200

• 226-234• 226-235• 226-236• 226-237• 226-238

Rata Short-term traps for method 30B console for low mass Emitters (lmE), 10 mm glass



• unspiked• Extra Durable Glass• Activated Iodinated Carbon• Individual ID

10 x 185 mm 2 300 mg Yellow Gray • None • 226-239LME

• Vapor-spiked• Extra Durable Glass• Activated Iodinated Carbon• Individual ID• Spiked with Mercury for QAQC per Method• Specially Packed for High Flow (3-4 LPM) &

Zero Hg Background Carbon

10 x 185 mm 2 300 mg Blue Gray

• 20• 50• 100• 150• 200

• 226-234LME• 226-235LME• 226-236LME• 226-237LME• 226-238LME

customizing for the method 30B Sorbent traps for Special Stack conditions



• acid gas Scrubber - A section placed before the first Sorbent bed. This section is analyzed liked a plug and added to the first sections

N/A N/A N/A Green None • AGS

• moisture Resistant - Any trap can be made with a special extra long glass. In wet sources, the extra length of the glass allows for more space for the moisture to evaporate before it hits the sorbent beds. This way the sorbent remains dry.

10 x 300 mm N/A N/A N/A None • MR

• CoiledPrefilter - Any trap can be made with a coiled prefilter place inside of the trap be-fore the first plug. The prefilter increases the surface area of the front plug and allows the particulate to evenly distribute itself along the prefilter instead of plugging up the first plug.

N/A N/A N/A White None • CP

Method 201AMethod 201A

Method 201A

PM10 Cyclone Package

1-54

PM2.5 Cyclone Package

PM10/2.5 Cyclone Package




Part number Item0040-K PM10 Cyclone Package0040 PM10 Cyclone

0040-NS Isokinetic Nozzle Set (12)0561 47 mm Stainless Steel Filter Holder

The PM10 Cyclone is built to meet EPA specifications for method 201A testing, and is designed for in-stack measurement of particulate matter equal to or less than 10µm. Designed by experienced field testers, its heavy-duty construction can sustain rigorous use. For greater adaptability with various stack sampling equip-ment, the shank locks down with any 5/8” compression fitting. The PM10 Cyclone Kit includes: PM10 Cyclone, twelve (12) nozzles, flat wrenches and anti-seize lubricant; all encased in a lifetime warranty shipping case.

Part number Item00402.5-K PM2.5 Cyclone Package00402.5 PM2.5 Cyclone

00402.5-NS Isokinetic Nozzle Set (12)0561 47 mm Stainless Steel Filter Holder

The PM2.5 Cyclone is built to meet EPA specifications for method 201A testing, and is designed for in-stack measurement of particulate matter equal to or less than 2.5 µm. Designed by experienced field testers, its heavy-duty construction can sustain rigorous use. For greater adaptability with various stack sampling equipment, the shank locks down with any 5/8” compression fitting. The PM2.5 Cyclone Kit includes: PM2.5 Cyclone, twelve (12) nozzles, flat wrenches and anti-seize lubricant; all encased in a lifetime warranty shipping case.

Part number Item004010/2.5-K PM10/2.5 Cyclone Package

004010.25 PM10/2.5 Cyclone0040-NS Isokinetic Nozzle Set (12)0040BH PM10/2.5 Button Hook 0040SR PM10/2.5 Strain Relief0040C PM10/2.5 Connector 5/8”0561 47 mm Stainless Steel Filter Holder

Metho

d 202

Metho

d 202

Metho

d 202






Method 202 is used to measure the levels of condens-able particulate matter (CPM) from a stationary source of emission. It is often used in series with test methods that measure filterable particulate matter (FPM), such as method 5, 17, or 201A. These methods remove the FPM before the sample reaches the method 202 train, where it is then collected in the dry impingers and on the out-of-stack CPM filter. There are specific material and opera-tional requirements that need to be met when performing method 202 testing, therefore it is important to consult the EPA method found at 40 CFR Part 51 prior to testing.

Part number 0100-202

Part number Item0028 Isokinetic Control Console with Pump0032 Sample Oven Compartment

0030202 Method 202 Impinger Compartment05003B202 Method 202 3” Ball Joint O-Ring Glassware Set

0034 Stainless Steel Impinger Outlet036050QC 50’ Umbilical Cable with Stainless Steel Quick Connects

0106BS 6’ Stainless Steel Heated Method 5 Probe with Liner and Geometric Calibration Report0140 Stainless Steel Probe Port Adaptor Seal Assembly

0400NS Complete Set of Stainless Steel Nozzles (1/8”, 3/16”, 1/4", 5/16”, 3/8”, and 1/2") with nuts and ferrules 0156 Sample Recovery Kit

0621.26 8.26 cm Glass Fiber Filters (Box of 100)9900 Submersible Pump

• Power Requirement: 120V and 240V configurations in stock• Thermocouple Connections: Type K• Cabinets: Welded Aluminum Detachable/Stackable Meter and Pump• Temperature Controllers: Solid State with 6 Channel Selector• *Method 202 Train Components Also Sold Separately

Method 202Method 202

Method 202






CEM

Equip

ment




CleanAir Engineering Express designs and manufactures a variety of gas sampling sys-tems and CEM accessories. These include integrated gas conditioning systems, extractive and dilution flow panels and custom gas extrac-tion probes, designed for rugged service and high reliability.

We specialize in solving difficult gas sampling problems for a variety of industries. Call us To-day.

07202

0036

0517SS

CEM Equipment

2-2

contInuouS EmISSIonS monItoRIng



PagenoX analyzers ...................................................... 2-3 ECO Physics NOX Analyzer................................. 2-3cEm Probes .......................................................... 2-4 JCT Heated Filter Probe ..................................... 2-4 CEM Heated Filter Probe .................................... 2-5 Heated CEM Probes ........................................... 2-6cEm Equipment ................................................... 2-7 Cateco CEM Heated Filter Unit ........................... 2-7 Large Cateco CEM Heated Filter Unit ................ 2-8Rata & cEm Equipment ...................................... 2-8 CEM Heated 3 Point Probe ................................. 2-8 Heated Sample Line ........................................... 2-9temperature controllers ..................................... 2-11 Universal Temperature Controller ....................... 2-11 Multiple Zone Temperature Controller ................. 2-11 Rack Mount Temperature Controller ................... 2-12Sample gas conditioners ................................. 2-13 MAK 10 Gas Conditioner .................................. 2-13 SGC4000 Gas Conditioner ............................... 2-18 Stainless Steel Coil Condenser ........................ 2-18cEm control Panels ........................................... 2-19 Dilution Control Panel ....................................... 2-19 FLW6 Flow Panel .............................................. 2-19 5 Channel Calibrator ......................................... 2-20 Sample Gas Distribution Module ...................... 2-20

cem equipmenT

®

0724

0725Rnt

CEM

Equip

ment

CEM

Equip

ment

CEM

Equip

ment

Eco Physics NOx Analyzers




contInuouS EmISSIonS monItoRIng call or order online today! ®

No matter where and at what concentrations nitrogen oxides have to be detected, you can depend on ECO PHYSICS analyzers to handle the job quickly, reliably and with precision that is unmatched anywhere in the world. Whether at trace levels in a clean room environment or for the analysis of exhaust gases directly at the source, you will find the type of che-miluminescence detector (CLD) to perfectly suit you.

*Each and every CLD NOx analyzer must pass an extensive test procedure before it leaves the factory. Test procedures and test equipment comply with ISO 9001 standards and are documented in accordance with international regulations. Call CleanAir Express for detailed product data sheets for any ECO PHYSICS analyzer.

model Range Feature component(s)70S 0-5,000 ppm Large Range NOx (NO)70E 0-500 ppm High Sensitivity NOx (NO)82S 0-5,000 ppm 0.2 ppm, compact NOx (NO)84S 0-500 ppm 0.02 ppm, compact822S 0-5,000 ppm 2 Channel Compact NO, NO2, NOx

824MMd 0-5,000 ppm & 0-500 ppm Dual Sample Inlets NO, NO, NOx, NOx844CMh 0-500 ppm NH3, Heated Head NOx, NH3, Noxamin700EL 0-10,000 ppm 2 Channel Analyzer NO, NO2, NOx

700ELHT 0-10,000 ppm Heated Tubing NO, NO2, NOx700LEVHT 0-500 ppm Low Noise NO, NO2, NOx

88SP 0-5 ppm With Flow Measurement NO86NOP 0-50 ppm Low Level Ambient NO700AL 0-100 ppm Measures to 1 ppb NO, NO2, NOx88NOP 0-5 ppm Low Level Ambient NO88CYP 0-5 ppm Ambient Ammonia NOx, NH3, total NOx-aminesPLC860 0-5,000 ppb Photolytic Converter NO2780TR Limit 10 ppt Atmospheric Research NO, NOy790SR Limit 1 ppt Atmospheric Research NO, NO, (Noy)

CEM EquipmentCEM Equipment

CEM Equipment

Jct JES 301 and JES 301 EX Heated Filter Probe





• cEm Probes for Heavy Particulate, High moisture, and Better accuracy: The equipment and labor costs associ-ated with the of replacement of sampling components and analyzers destroyed by particulate contamination or corro-sion can easily exceed $100,000. This does not included the potential regulatory, legal, and financial consequences associated with missing CEM data. Other probe assemblies can also be expensive to maintain, and have a short useful life. The JCT JES 301 series heated filter CEM probe is the solution to these problems.

• Protection for your cEm System and analyzers: In order to prevent particulate contamination, the standard unit incorporates a 40 mm O.D. silicone carbide filter element that is 135 mm in length, which has a 2 micron pore size. The large filter surface area extends its life, and reduces the maintenance costs. For locations with smaller entrained particles, a surface coated filter is available, with a 0.2 micron porosity. For the worst applications (particulate loading >= 20 g/m3), however, two additional options are available: an in-situ 2 micron pre-filter, and deflector. Uniform heating of the probe and filter assembly prevents condensation of acid gases in the sampling stream. These condensed acids can cause corrosive damage to the sampling components and analyzers, and lead to measurement bias. The insulated enclosure also prevents cool ambient air from causing this condensation.

• Heating capabilities: The integrated probe temperature controller has a factory set heater temperature maximum setting of 392 º F, and is adjustable in 40º F increments. As an option, this limitation can be removed, to allow heating up to 599º F.

• calibration Port and Back Purging available: The JES is available with calibration port and blow back purging sys-tem. These options allow for calibration of the analyzers, as required by EPA regulations. The blow back purging can be used to remove large particulate from the filter, before maintenance is performed.

• typical Installations: The JES 301 can be utilized at coal fired power plants, natural gas fired combustion turbines, cement manufacturing sites, steel mills, aluminum processing plants, and other large industrial processes.

• Explosion Proof and High Pressure Versions: The JES 301 is available in explosion proof and high pressure ver-sions. Typical locations that require these options include refineries, and other volatile gas handling operations that require explosion proof equipment.

• Integrated alarm: The JES 301 has an integrated alarm which can be wired to the control system, to notify the users when the probe temperature falls below or climbs above the low/high set points.

Part number Item0730J JCT JES 301 Heated Filter Probe

0730JEX JCT JES 301 Ex Heated Filter Probe0730FE Replacement 2 micron Silicone-Carbide Filter Element

Jes 301 Filter probe includes: • Filter Probe Assembly• 2 “ FPT Mount• Field approved• Easy maintenance without tools• No cold spots• Rugged construction• Thermal-insulated enclosure• With temperature controller• Power Requirement: 115VAC/60Hz• Weight: 25 lb

CEM

Equip

ment

CEM

Equip

ment

CEM

Equip

ment

CEM Heated Filter Probe





Part number Item07202 2’ Effective CEM Heated Filter Probe with 20-micron SS Frit, Fiber Filter Stem07204 4’ Effective CEM Heated Filter Probe with 20-micron SS Frit, Fiber Filter Stem07206 6’ Effective CEM Heated Filter Probe with 20-micron SS Frit, Fiber Filter Stem07208 8’ Effective CEM Heated Filter Probe with 20-micron SS Frit, Fiber Filter Stem

The CleanAir Express CEM Heated Filter Probe has an integral filter chamber that will accept a glass fiber filter cartridge or a stainless steel sintered frit. Two stages of filtration may be achieved by using an in-stack course 20-micron SS frit on the probe end and a fine .02-micron filter in the chamber. The probe and filter chamber are heated by the same reliable high temperature cable heater eliminating the need for multiple temperature controllers. An optional in-line self-regulating (275 °F) temperature control may be incorporated into the power cord making the heated filter probe totally self contained and easy to use.

• Max Temp: (w/SS frit 400 °F)• Voltage: 120/240 Vac

Stainless Steel Fritted FilterPart number 0740F

High Strength Sintered Stainless Steel Fritted Filter is an ex-cellent choice for keeping particulate out of your probes and lines. These 20 micron frits are cleanable and feature durable long lasting stainless steel construction with 1/4” NPT connec-tion or connection of your choice.

Part number Item0740FP Frit Protector for Part Number 0740F, 1 1/2” Tube for 180° of Coverage

0740FPRO Frit Protector for Part Number 0740F, 1 1/2” Tube for 360° of Coverage


CEM Equipment

Heated Gas Sample Probes with Attached Frit

2-6

Heated Gas Sample Probes

Unheated Gas Sample Probes with Attached Frit

Unheated Gas Sample Probes




Part number 07416

Part number 07396

Part number 07406F

Part number 07406

Specifications• Length: 2ft - 10ft • Voltage Requirement: 120V/240V• Power Requirement: 100-800W Depending on length • Power Connection: Male Receptacle• Thermocouple Connection: Type-K

Specifications• Length: 2ft - 10ft • Voltage Requirement: 120V/240V• Power Requirement: 100-800W Depending on length • Power Connection: Male Receptacle• Thermocouple Connection: Type-K

Specifications• Length: 2ft -10ft• Construction: 304 or 316 Stainless Steel• Tubing: 3/8” OD. • Calibration Tee: 3/8”

Specifications• Length: 2 ft -10ft• Construction: 304 or 316 Stainless Steel• Tubing: 3/8” OD. • Calibration Tee: 3/8”

The Single Point Heated CEM Probe is available with a 1/4” or 3/8” stainless steel heated liner with a 1” O.D. protective stainless steel sheath and type K thermocouple. The probe comes in various lengths and can handle temperatures up to 400 °F (1200 °F with optional high temperature heater). 120v and 240v available. Add HT to end of part number for high temperature option.

CEM

Equip

ment

CEM

Equip

ment

CEM

Equip

ment

CEM Cateco Assembly

2-7

CEM Cateco Control Umbilical

CEM Cateco Heated Filter Unit

Dual Heater Controller




Part number 0035A

Specifications• Umbilical Power Input Connection: Amphenol 4-pin Female/Male• Auxiliary Power Output Connection: 3 pin 120V Receptacle• Thermocouple Connection: K-Type Plug (0316M x 3 , 0316F x 1)• Length: 2 Feet• Weight: 1 lbs. (0.45 kg)

Specifications• Voltage Requirement: 120V• Umbilical Connection: Amphenol 4-pin (9418)• Temperature Controllers: 1/32 DIN, Fuzzy Logic (91301)• Thermocouple Connection: K-Type Panel Mount (0316-SM)• External Dimensions (h x w x d): 3.15” x 4.76” x 7.75”• Weight: 3 lbs. (1.36 kg)

Part number 0035C

Specifications• Voltage Requirement: 120V• Power Requirement: 450W• Umbilical Power Input Connection: Amphenol 4-pin (9412)• Auxiliary Power Output Connection: 3 pin 120V Receptacle• Thermocouple Connection: K-Type Panel Mount (0316-SM)• External Dimensions (h x w x d): 7.5” x 9.25” x 6.25”• Internal Dimensions (h x w x d): 6.25” x 7.25” x 7.25”• Weight: 7 lbs. (3.2 kg)

cem cateco assembly includes:• 0035A - Cateco CEM Control Umbilical• 0035B - Cateco CEM Heated Filter Unit• 0035C - Dual Heater Controller

Part number 0035B

Part number 0035RNT


CEM Equipment

Large CEM Cateco Assembly

2-8

CEM Heated 3 Point RATA Probe




The 3 Point RATA Probe makes CFR Part 60 sampling as easy as 1,2,3. The electrically actuated C-276 Hastelloy ball valve allows 1 of 3 user defined traverse points to be sampled. A calibration gas tee is included on point 1. Sample points 1, 2, or 3 can be selected manually at the probe (Local Mode) or from remote dry contacts or data logger (Remote Mode). Built in digital controllers maintain oven and probe at desired temperature. 3 stainless steel fritted filters on the probe and 3 glass fiber filters in the oven keep the sample clean. A strain relief is provided for a steady heated sample line connection.

Specifications• Voltage Requirements: 120 VAC• Max Operating Temperature: 500 °F• Max Operating Pressure: ± 14 psi• Power Requirement: 5.1 Amps (full load)• Circuit Protection: 15 Amp Breaker for Manual/Remote• Control Umbilical Connection: 6-pin Amphenol• Ball Valve: C-276 Hastelloy, 5 Way• Oven Filters: 3 x 304 Stainless Steel Filter Holder • Probe Filters: 3 x 316 Stainless Steel Frit• Probe: 24” x 2” Dia. 304 Stainless Steel• Probe Length Adjustment: Add Desired Length of 3/8”• Stainless Steel Tubing to Each Point• Oven Internal Dimensions (h x w x d): 9 ¼” x 8 ½” x 8 ¾”• Weight: 34 lbs.

Specifications• Voltage Requirement: 120V• Power Requirement: 450W• Umbilical Power Input Connection: Amphenol 4-pin (9412)• Auxiliary Power Output Connection: 3 pin 120V Receptacle• Thermocouple Connection: K-Type Panel Mount (0316-SM)• External Dimensions (h x w x d): 9.5” x 10.5” x 9.5”• Internal Dimensions (h x w x d): 8.25” x 9.25” x 8.75”• Weight: 12 lbs. (5.4 kg)

Part number 0036

Part number 073123

The double-wall aluminum constructed heated filter unit is an excellent choice for CEM applications that require heated filters or valves. The case is extremely lightweight and durable, and heats quickly with its small heating area. The probe is mounted through an aluminum arm identical to those used on the Modular Sample Unit. A strain relief is provided for a stable heated sample line connection. Electrical connections are compatible with those used in the industry. An optional quick mount dual heater controller (# 0035C) is available to control probe and box heaters.

cem large cateco assembly includes:• 0035A - Cateco CEM Control Umbilical• 0035LC - Large Cateco CEM Heated Filter Unit• 0035C - Dual Heater Controller

CEM

Equip

ment

CEM

Equip

ment

CEM

Equip

ment

Heated Sample Line

2-9

Self Regulating Heavy Duty Heated Sample Line




*Custom lengths, voltage, and configuration availablePart number Voltage Watts length/Ft operating temp.

0723-10 120 300 10 400°F at 0°F0723-25 120 750 25 400°F at 0°F0723-50 120 1500 50 400°F at 0°F

0723-100 120 2500 100 400°F at 0°F*0723-100HD 120 3000 100 400°F at -20°F

0725RNT Universal Temperature Controller*HD series offers 3000w and triple insulation. Manufactured to have a continuous operating temperature of 400°F at -20°F ambient temperature.

These flexible lines feature an electrically heat traced and insu-lated 3/8” Teflon® sample line with a stainless steel over braid and stainless steel tube ends, a ¼” Teflon® calibration line, 3 pin Am-phenol power connector, and 2 type K thermocouples. Protected by a durable scuff resistant extruded polyurethane jacket. *Tem-perature controller optional.

CleanAir Engineering heavy duty heated sample lines consist of heat traced Teflon® with insulation and nylon braid. Industrial Strength heated sample lines consist of heat traced Teflon® with insulation, nylon braid and silicone jacket. Sample lines are con-structed of heavy wall (.0625”) PTFE outside diameters. Termi-nations and standard thermocouple are included. *Temperature controller optional.

Part number length/Ft PtFE Part number length/Ft PtFE072254 5’

5/8”

072252 5’

3/8”0722104 10’ 0722102 10’0722154 15’ 0722152 15’0722204 20’ 0722202 20’0722254 25’ 0722252 25’072253 5’

1/2”

072251 5’

1/4”0722103 10’ 0722101 10’0722153 15’ 0722151 15’0722203 20’ 0722201 20’0722253 25’ 0722251 25’

• Heated Sample Line - Length - Tube O.D. - Option• Example: 0722104678 (10’ 5/8” Heated Sample Line with (6) armored end, (7) strain relief & (8) thermostatic control)


CEM Equipment

Heated Sample Line Protective Guard

Self Regulating Heated/Insulated Electrical Blanket (Hot Pocket)

Mini Heated/Insulated Electrical Blanket (Hot Pocket)

Part number 0723G

Part number 0723HP

Part number 1233





Protect your heated sample line from kinks, cuts, scratches, and other defects and extend its lifespan by supporting the line with our protective guards. These protective guards provide a handy means of hoisting and suspending heated sample lines and other gear when necessary. Two guards are requried per set. Cable ties are supplied for attaching guards to heated sample line. *Heated Sample Line Guards are recommended every ten feet when suspending line in air.

Specifications• Operating Temperature: 210° F• Ambient Temperature: 0° F• Operating Voltage: 120 VAC• Current: 0.136 Amps• Wattage: 14.96 Watts• Control: Self Regulating• Open/Close: Velcro® Release• Dimensions Close: 9”x 6”x 2” (LxWxH)• Dimensions Open: 9”x12”x1” (LxWxH)

Specifications• Max Operating Temperature: 400° F• Ambient Temperature: 0° F• Operating Voltage: 120 VAC• Control: Works in series with Heating Element• Open/Close: Velcro® Release• Dimensions Close: 4 “x 3 “x 1 “ (LxWxH)• Dimensions Open: 4”x 6”x.5” (LxWxH)• No Thermocouple Included

CEM

Equip

ment

CEM

Equip

ment

CEM

Equip

ment

Universal Temperature Controller

Rack Mount Temperature Controller

Multiple Zone Temperature Controller





Part number 0725R

The Universal Temperature Controller is used to control heated sample lines, ovens, heated head pumps, filters, and probes. This Controller can be adapted to control almost any type of heating load. The standard unit features a program-mable digital temperature controller, 25 amp circuit breaker, 25 amp solid state relay output, type K thermocouple input, and a 3 pin Amphenol electrical connector housed in a compact NEMA aluminum enclosure. *Call for options on thermocouple type, voltage, and power requirements

Multiple zone temperature controllers are an excellent choice for controlling multiple instruments simultaneously such as heated sample lines, ovens, heated head pumps, filters, and probes. The standard unit features four programmable digital temperature controllers, four 25 amp circuit breaker switches, 25 amp solid state relays, type K thermocouples, and four receptacle outlets. *Call for options on thermocouple type, voltage, and power requirements

The Rack Mount Temperature Controller is commonly used to control heated sample lines, ovens, heated head pumps, filters, and probes. The Controller can be adapted to control almost any type of heating load. The standard unit features a programmable digital temperature controller, 25 amp circuit breaker switch, 25 amp solid state relay output, type K thermo-couple input, and a 3 pin Amphenol electrical connector housed in a sub-rack mountable aluminum enclosure. *Call for options on thermocouple type, voltage, and power requirements

Specifications• Voltage Requirement: 120 V• Power Requirement: Up to 25 amps• Overload Protection: 25A Manual Reset Circuit Breaker• Sample Line Power Output Connection: Amphenol 3-pin• Temperature Controller: 1/32 DIN Temperature Controller• Thermocouple Connection: K-Type Panel Mount

Specifications• Voltage Requirement: 120 V• Power Requirement: Up to 25 amps• Overload Protection: 25A Manual Reset Circuit Breaker (4)• Sample Line Power Output Connection: Receptacle Outlets (4)• Temperature Controller: 1/32 DIN Temperature Controller (4)• Thermocouple Connection: K-Type Panel Mount (4)

Specifications• Voltage Requirement: 120 V• Power Requirement: Up to 25 amps• Overload Protection: 25A Manual Reset Circuit Breaker• Sample Line Power Output Connection: Amphenol 3-pin• Temperature Controller: 1/32 DIN Temperature Controller• Thermocouple Connection: K-Type Panel Mount

Part number 0725PM

Part number 0725RNT


CEM Equipment

Customized Multiple Zone Rack Mount Temperature Controller

Universal Temperature Controller Adapter

Heated Sample Line Power Extension

Part number Item0725100PE 100’ Heated Sample Line Power Extension 072550PE 50’ Heated Sample Line Power Extension 072525PE 25’ Heated Sample Line Power Extension

*Call for options on thermocouple type, voltage, length and power requirements.





The Multiple Zone Rack Mount Temperature Controller is customizable for any application. The enclosure can be custom-ized into 2- 5 individual rack mount controllers that are assembled inside a single enclosure. The dimension of the controller is a 2u rack mount enclosure designed to fit inside a 19” system. Please call a CleanAir Representative to customize your box today. *Call for options on thermocouple type, voltage, and power requirements.

Specifications• Voltage Requirement: 120V or 240V• Power Requirement: Up to 15 Amps• Overload Protection: 1A to 15A Manual Reset Circuit Breaker• Sample Line Power Output Connection: Amphenol 3-pin or Re-

ceptacle Outlet• Temperature Controller: 1/32 DIN Temperature Controller• Thermocouple Connection: K-Type, E-Type, J-Type Panel Mount• Lead Time: 10-15 Business Days

Part number 0725PMR

Design your controller today!more custom options are available,

call today!

Part number Item0725A 2 Ft. Temperature Controller Adapter 120 VAC

0725A5 5 Ft. Temperature Controller Adapter 120 VAC 0725A6 6 Ft. Temperature Controller Adapter 120 VAC

0725A220 2 Ft. Temperature Controller Adapter 240 VAC 0725A5220 5 Ft. Temperature Controller Adapter 240 VAC 0725A6220 6 Ft. Temperature Controller Adapter 240 VAC

*Call for options on thermocouple type, voltage, length and power requirements.

CEM

Equip

ment

CEM

Equip

ment

CEM

Equip

ment

2-13

MAK 6-2 Sample Gas Conditioner

MAK BCR01 Mobile Gas Conditioner with Handle




Specifications• Conditioner Cooling Capacity: 410 BTU/hr (433 kJ)• Number of Gas Paths: two Gas• Path Material: PVDF (standard), Stainless Steel (optional), Glass (optional)• Inlet Temperature: PVDF: 284 °F (140 °C), SS & Glass: 356 °F (180 °C)• Gas Path Volume: 8.4 in3 (137 cm3)• Ambient Temperature: 41 °F to 113 °F (5 °C-45 °C)• Sample Contact Surfaces: PVDF, 316 SS, Teflon• H x W x D: 11.5” x 14.25” x 13.50”• Electrical: 3.18A @ 115V 50/60Hz

The MAK 6-2 Standard Sample Gas Conditioner is an essential part of any extractive-gas analyzer system. This unit will continuously dehumidify a sample stream and rapidly separate the condensable liquids from the gas. The MAK 6-2 Plus is ideal for use with SO2, NOx, CO, CO2, or O2 monitors. The cooling system consists of a CFC-free compressor/chiller that operates at over 150% excess capacity. This allows the MAK to compensate for wide variations in input tempera-ture, and guarantees a constant dew point at the outlet. Features include low maintenance, corrosion-resistant Kynar® sample tubing and digital cooling temperature display. (sample pump and condensate pump not included.)

Part number Item0715 MAK 6-2 Sample Gas Conditioner

0715ASSY MAK 6-2 with Stand, Peristaltic Pump and Gas Path Brackets

Features• Proven and reliable technology• Built-in condensate discharge pump• Stable dew-point + 3°C• Digital temperature display• High performance heat exchanger• Proportional temperature control• Compact and robust• Environment-Friendly

The mobile MAK gas conditioner (BCR01) is designed to lower the sample dew point and separate water vapor from hu-mid sample streams in gas analysis systems. This mobile gas conditioner will continuously dehumidify a sample stream and rapidly separate the condensable liquids from the gas. The lightweight and slim design of the mobile gas condi-tioner provides easy maneuvering and positioning in most environments. This allows the MAK to compensate for wide variations in input temperature, and guarantees a constant dew point at the outlet. Features include low maintenance, corrosion-resistant Kynar® sample tubing and digital cooling temperature display.

Part number Item0710M MAK BCR01 Mobile Gas Conditioner with Handle


CEM Equipment

AGT BCR Series Gas Conditioning Systems

Features:

General:

Technology:




Part number Item0710BCR1 BCR01 Gas Conditioner with 1 Mono Gas Duct0710BCR2 BCR02 Gas Conditioner with 1 Mono Gas Duct

0710BCR2-2 BCR02 Gas Conditioner with 2 Dual Gas Duct0710BCR3 BCR03 Gas Conditioner with 1 Mono Gas Duct

0710BCR3-2 BCR03 Gas Conditioner with 2 Mono Gas Duct0710BCR4 BCR04 Gas Conditioner with 2 Dual Gas Duct0710BCR5 BCR05 Gas Conditioner with 1 Mono Gas Duct

0710BCR5-2 BCR05 Gas Conditioner with 2 Mono Gas Duct0710BCR5-4 BCR05 Gas Conditioner with 2 Dual Gas Duct

The Sample Gas Cooler is designed to lower the sample dew point and separate water vapor from humid sample streams in gas analysis systems. A typical application is to provide and maintain a conditioned gas sample prior to gas analysis by moisture intolerant analysis equipment.

To achieve a stable dew-point at varying inlet conditions, an improved proportional temperature controller and a high per-formance heat exchanger have been designed. The cooling system features a continuously running non-CFC compres-sor motor filled with environmentally friendly R134a. The heat exchanger is built into analuminum cylinder, which absorbs peak loads and utilises maximum heat transfer rate and guar-antees leak free operation. A built-in condensate discharge pump removes the condensate continuously.

• Proven and reliable technology• Built-in condensate discharge pump• Stable dew-point + 3°C• Digital temperature display• High performance heat exchanger• Proportional temperature control• Compact and robust• Environment-Friendly

2-14

CEM

Equip

ment

CEM

Equip

ment

CEM

Equip

ment

MAK 10 Sample Gas Conditioner





MAK 10 Sample Gas Conditioners offers precision, safety and long-term stability in emis-sion monitoring. The MAK 10 Gas Conditioner is designed to transfer sample gas to extrac-tive analyzers for CEM and process control applications. The sample gas flows through a two-pass conditioner to ensure a constant stream of dry gas is supplied to the analyzers


CEM Equipment

MAK 10-2 Sample Gas Conditioner

MAK 10-1 Mobile Sample Gas Conditioner

MAK 10-2-PS2-TF2-EC2 Sample Gas Conditioner

MAK 10-2 19” Rack Sample Gas Conditioner





• Two gas paths• Two heat-exchangers• Two condensate pumps• One 3-pole alarm contact MAK

• Two gas paths• Two pre-seperators for Dp in > 65°• Two heat-exchangers• Four condensate pumps• One Teflon-depth filters• One 3-pole alarm contact MAK• One electronic control with one 3-pole alarm contact for external moisture sensor• One flow meter with needle valve

• One gas path• One heat-exchangers• One condensate pump• One Teflon-depth filter• One 3-pole alarm contact MAK• One electronic control with one 3-pole alarm contact for external moisture sensor• One flow meter with needle valve• Two handles for mobile operations

• Two gas paths• Two pre-seperators for Dp in > 65°• Two heat-exchangers• Four condensate pumps• Two Teflon-depth filters• One 3-pole alarm contact MAK• Two electronic control with one 3-pole alarm contact for external moisture sensor

CEM

Equip

ment

CEM

Equip

ment

CEM

Equip

ment

2-17

Teflon-depth Filter

Moisture Sensor with Flow Chamber and Integrated Electronic Control

The Cooling and Separation Technology




• Sample Gas Cleaning- Reliable filtration of particles down to 0,1 micron takes place in the Teflon depth-filter. A view port allows you to see when the filter needs changing

• Moisture Break-Through Monitoring- An externally installed moisture sensor controlled by an integrated electronic control monitors the function of the cool-ing system and the condensate pump. Analyzers are protected from conden-sate break-through.

• Measurement and Adjustment of Sample Gas Flow- With the flow meter and needle valve the sample gas flow can be adjusted and precisely measured

• Pre-cooling of Sample Gas with Inlet Dew Point > 65°C- The integrated air-cooled pre-cooler (not shown) pre-separates free condensate and solid par-ticles which are discharged through the additional condensate pump.

• Elimination of SO3- Aerosols, HCL- NO2- Concentrations- Samples contain-ing additional water and acid injection can be accommodated.

• MoreEfficientwithnoenergylosseveninhighambienttemperatures1. Coldness transfer through copper and aluminum,2. Thermal conductance values 300 and 200 W/m°C,3. Coldness transferred from the inside outwards.• High and constant dryness rate even at extreme load changes1. Hydrophobic surface through coating,2. large condensate drops are formed immediately,3. spiral performing stream goes downwards,4. discharge of condensate at the lowest point.• low dissolution rate, a contribution to more environmental protection1. Very small dead space (26ml),2. extremely short response time of gas to liquid,3. large drops have a similar surface to content ratio,4. PTFE-coating with low electrostatic current,5. condensate spiral stream separated from 3 sides.• Keys to reliability1. Chemical resistance thanks to the PTFE-coating,2. no clogging due to the self cleaning feature.• comprehensive testing procedures guarantee equipment reliability1. Providing of true inlet dew-points,2. automatic control of gas mixture at inlet,3. trace gas measuring by infrared analyzer,4. data processing and storing,5. availability of test certificates.


CEM Equipment

SGC4000 Sample Gas Conditioner

2-18

Stainless Steel Coil Condenser




Part number 0517SS

Specifications• Material: Stainless Steel 304 or 316• Weight: 4 lbs• Dimensions: 15” x 4” x 5”The CleanAir Express Stainless Steel Coil Con-denser is made from 304 or 316 3/8” stainless steel tubing.

Part number 0700

Specifications• Cooling capacity: 120 to 200 BTU/Hr @ 35 °F Plate Temperature• Cooler Plates: Hastelloy• Flow Channels: Kynar• Moisture Removal: 0 to 30% @ 5LPM• Sample Pump Flow Rate: 5LPM• Voltage: 120 VAC • Operating Temperature: 1 to 45 °C• Condensate Removal: Peristaltic Pump • Water Intrusion Monitor: Disables sample pump when moisture is detected.• Temperature Control: 1/16 DIN, Digital• Weight: 30lb.• Dimensions: 15” x 17” x 6.5”

The SGC4000 is designed to transfer sample gas to extractive analyzers for CEM and process control applications. The sample gas flows through a thermoelectric (Peltier cell) sample gas cooler to ensure a constant stream of dry gas is sup-plied to the analyzers. Replacement parts for SGC4000 are listed below.

Part number Item0704 Cooling Unit

0705S Single Power Supply0706 Temperature Controller Assembly

0707R Rebuild Kit for KNF Pump (0711R) (Not Shown)0710 Water Intrusion Monitor

0711R KNF Sample Pump9771-BA Double Head Peristaltic Pump

CEM

Equip

ment

CEM

Equip

ment

CEM

Equip

ment

Dilution Control Panel

2-19

FLW6 Flow Panel




The #0735 Dilution Control Panel is designed to be used with the #0732D Dilution Probe for monitoring gaseous emissions with EPA reference method analyzers. The control panel features flow control of calibration gas and blow back air, adjust-able dilution air pressure, digital gauges and 0 - 2 vdc analog output for dilution air pressure and orifice vacuum. With this system, continuous in-situ sample extraction has low flow rates, longer filter life, eliminates the need for heated sample lines and transports the sample at positive pressure.

Part number 0772

The CleanAir Express FLW6 Flow Panel is a 3RD generation 19” rack mount panel designed to control sample and cali-bration gases to extractive analyzers for CEM and process control applications. Design features include an auto mode for remotely controlling up to 13 functions from your data acquisition and control system for automated calibrations. Manual control is simplified with interlocking push button switches and status outputs for flagging data. Three calibration gas inputs (High, Mid, Low) for each channel and a separate zero gas input. Adjustable flow rate for probe tip calibration and sample out (A,B,C,D). Separate pressure regulators for both sample and calibration gas provide reliable calibrations by match-ing pressure and flow. Individual channel calibration allows other channels to stay online. Water intrusion alarm light and contact output for disabling sample pump if moisture is detected in system. Back purge function controls air and remote solenoid contacts for blow back of sample probe and filter.

Features• Manual Control with interlocking push buttons and 24 status outputs for

flagging data.• Remote Control 13 Functions from your data acquisition and control sys-

tem for automated calibrations. • 4 Sample Outputs A,B,C,D with rotometers and needle valves for flow

control. • 13 Calibration Gas Inputs High, Medium, and Low range plus a zero gas. • Individual Channel Calibration allows other channels to stay on line.• Probe Tip Calibration with rotometers and needle valves for flow control. • Separate Pressure Regulators for sample and calibration gas provides

reliable calibrations.• Water Intrusion Monitor engages when moisture is detected in system. • Back purge Function allows blow back of probes and filters.• Internal Sample Filter for protection of flow panel and analyzers.• Stainless Steel Solenoids and Fittings top of the list of premium quality

parts.

Part number 0735


CEM Equipment

5 Channel Calibrator

2-20

Sample Gas Distribution Module




The 5 Channel Calibrator is designed to interface CEM analyzers with five individual calibration gasses. The gasses can be controlled manually or remotely to flow through one of two calibration ports. Sub-Rack designed for installation into a standard 19” instrument rack. Flow-meter with stainless steel needle valve provides indication and control of calibration gas flow rate from 1 to 10 lpm. Auto Mode allows a data acquisition system equipped with a dry contact closure to control the calibration points remotely. A 12VDC output signal is provided for use by the control system via an Amphenol connector located on the rear of the 5 Channel Calibrator.

Features• Flow meter with stainless steel needle valve provides indication and con-

trol of calibration gas flow rate from 1 to 10 lpm. • AUTO Mode allows a data acquisition system equipped with a dry contact

closure to control the calibration points remotely. • A 12 VDC output signal is provided for use by the control system via an• Amphenol connector located on the rear of the calibrator. Sub-Rack De-

sign for installation into a standard 19” instrument rack.

Part number 0724

The Sample Gas Distribution Module is designed to interface CEM analyzers with four individual sample gas streams. A back pressure regulator controls the sample pressure to provide a consistent flow rate to the analyzers. In calibration mode the sample gas is bypassed to the vent and a calibration gas port is routed to the analyzers for internal calibration. The calibration mode can be controlled manually by front panel push button or remotely from your data acquisition system. A sample inlet filter is mounted on the back panel for easy access. The Sample Gas Distribution Module combined with a Calibration Module can make controlling sample and calibration gases to your analyzers as simple and easy as it can be.

Features• Flowmeters: with stainless steel needle valve provides indication and

control of sample gas flow rate from 0 to 1.0 lpm. and a 0-10 lpm. flow meter for sample vent flow.

• Back Pressure Regulator: provides consistent sample flow rates. • Sample Inlet Filter: mounted on back panel for easy access.• CAL Mode: allows a data acquisition system equipped with a dry contact

closure to• control the calibration port remotely. A status output is also provided when

in manual cal mode.• Sub-Rack Design: for installation into a standard 19” instrument rack.

Part number 9742

CEM

Equip

ment

CEM

Equip

ment

CEM

Equip

ment

Heated In-Line Filter Pump Assembly

2-21

Heated Filter Holder




Specifications• Weight: 38 lbs.• Dimensions: 12” x 17” x 21” ( L x W x H)• Pump Max Flow: 27 lpm• Pump Amperage: 3.6-4.0 amps• Pump Heater Amperage: 1.25 amps• Pump Power: 120/240 Volts, 60/50 Hz• Pump Heater Wattage: 2 @ 75 Watts with type K Thermocouple• Pump: 316SS Single Head with Teflon diaphragm• Max Pump Heater Temperature: 400ºF• Filter Heater Wattage: 338.82 Watts• Filter Heater Amperage: 2.82 amps• Max Filter Heater Temperature: 400ºF• Voltage Requirements: 120 VAC• Model Filter Size: 1” x 7” (2.54 cm x 17.78 cm)• Inlet and Outlet Fittings: 3/8” Stainless Steel Compression Fitting

Part number 9769HPFS

Part number 1233F

The heated filter holder has a glass/ptfe flurocarbon microfiber filter that scrubs the sample before it enters the pump. The large size of the filter (1” diameter, 7” long) ensures that the heated in-line filter and pump assembly can be used in many different applications, over long periods of time. However, the filter should be periodically changed to ensure accurate and consistent sampling. For use in: process monitoring, stack testing, gas and diesel sampling.

CleanAir Engineering’s Heated In-Line Filter Pump Assembly is for use in emissions testing and chemical analysis. Main-taining a steady temperature around 250°F is important to ensure that moisture, acid gas, and other constituents of the gas stream do not condense before entering the analyzing equipment. This can result in the damage of equipment as well as the loss of important data. The Heated In-line Filter and Pump Assembly helps to ensure the accuracy of gas samples by providing a heated route for the gas before analysis. For use in: process monitoring, stack testing, gas and diesel sampling.


CEM Equipment





Tuff Guard Heated Sample Lines

*Custom lengths, voltage, and configuration availablePart number Voltage Watts length/Ft operating temp.

0722-25 120 675 25 400°F at 0°F0722-50 120 1350 50 400°F at 0°F

0722-100 120 2400 100 400°F at 0°F0722-130 120 2400 130 400°F at 0°F0725RNT Universal Temperature Controller

The tuff guard heated sample line features a superior lightweight rugged corrugated hi-tech Polyamide cover that helps prevent damage to the sample and calibration line. Designed to provide extended, trouble free service for mobile CEMS testing. The sample line is electrically heat traced and insulated 3/8” Teflon ® PTFE sample line with a 1/4 Teflon ® PFTE calibration line, 3 pin Amphenol power connector, and 2 type K thermocouple plugs. Protected by a durable crack resistant corrugated hi-tech Polyamide cover with a two way breakout boot to seal sample and calbiration lines. This high performance jacket provides the heated sample line with superior abrasion resistance over concrete or gravel roads. It also helps prevent kinking when the heated line is routed over railings or a wall. This rugged heated sample line is able to withstand great strain without tearing, breaking or kinking and is very lightweight. *Temperature controller optional.

Heated sample line Features• Rated for 400 º F continuous operation at 0º F ambient temperature• A backup type K thermocouple to prevent project delays in the case of primary thermocouple failure in the field.• Durable lightweight weather resistant “tough guard” corrugated hi-tech Polyamide cover protects heated sample

line from tear, kinking and breakage.• Inert teflon ® (PTFE) sample and calibration lines will provide more accurate results by eliminating potential

bias from other materials. Teflon ® (PTFE) is also more corrosion resistant than tygon, and can be washed with acetone without degradation.

excepTionally ligHTweigHT and durable HeaTed sample

line!

nominal weight:• 25 ft. at 12 lbs.

• 50 ft. at 22 lbs.• 75 ft. at 32 lbs.• 100 ft. at 42 lbs

Porta

ble A

nalyz

ers




CleanAir Engineering Express supplies a vari-ety of portable gas analyzers to our customers.

We specialize in solving difficult gas sampling problems for a variety of industries. Call us To-day.

0882

33051

Portable Analyzers

3-2

PoRtaBlE analYzERS



PagePortable gas analyzers ....................................... 3-3 Testo 350 ............................................................ 3-3 Testo 330 ............................................................ 3-6 Testo 340 ............................................................ 3-6 ECOM-AC Plus ................................................. 3-12Portable analyzers .............................................. 3-7 Testo 875 ............................................................ 3-7

porTable analyzers

®

0035Xl

Porta

ble A

nalyz

ers

Porta

ble A

nalyz

ers

Porta

ble A

nalyz

ers

PoRtaBlE analYzERS call or get a quote online today! ®




Testo 350 Portable Flue Gas Analyzer

Part number Item0350-1 Testo 350 # 1 Upgrade Kit0350-2 Testo 350 # 2 Standard Kit0350-3 Testo 350 # 3 Engine Kit0350-4 Testo 350 # 4 Turbine Kit

The all new Testo Model 350 is the most innovative portable combustion analyzer to date. Keystone features of the Testo 350 include interchangeable, pre-calibrated sensors with temperature control; a CO sample dilution system for test range expansion; complete, onboard sample conditioning; and an abundance of opportunities to interface with the entire system. The cells of the Testo 350 can be easily replaced or exchanged for greater testing flexibility.

Specifications:• Constituents Measured: Temperature, Draft Pressure, O2,

CO2, CO, NO, NO2, SO2, Velocity, Differential Pressure with optional cells for hydrocarbons

• Power Requirement: 110-230V, 90-260V or rechargeable battery

• Approximate Shipping Weight: 30 lbs.

Key Features:• Ultra-rugged Construction• Innovative sensor technology• Brillant HD Color Display• Simple intuitive operation• Improved accuracy

Simple Snap in Design Safe transport Real-time color graphics

Portable AnalyzersPortable Analyzers

Portable Analyzers

Testo 350 Portable Analyzer Conditioning Kit

3-4

Testo 350 XL Portable Analyzer and Replacement Sensors




The Testo Model 350 XL is the most innovative portable combustion analyzer to date. Keystone features of the Testo 350 XL include interchangeable, pre-calibrated sensors with temperature control; a CO sample dilution system for test range expansion; complete, onboard sample conditioning; and an abundance of opportunities to interface with the entire system. The cells of the Testo 350 XL can be easily replaced or exchanged for greater testing flexibility.

Part number Item350XLO2 02 Replacement Sensor - 300/350

350XLCOL CO Low Replacement Sensor (0-500 ppm, H2 Compensated, 0.1 ppm res.)350XLCO CO Replacement Sensor (0-10,000 ppm, H2 Compensated)

350XLNO2 NO2 Replacement Sensor (0-500 ppm)350XLSO2 SO2 Replacement Sensor (0-5,000 ppm)350XLNOL NO Low Replacement Sensor (0-300 ppm, 0.1 ppm res.)350XLNO NO Replacement Sensor (0-3,000 ppm)350XLHC HC Replacement Sensor 0-4% - 300350XLH2S H2S Replacement Sensor - 300 (0-300 ppm)

Part number 0350CK

Part number Item0350XL-1 Testo 350 # 1 Upgrade Kit0350XL-2 Testo 350 # 2 Standard Kit0350XL-3 Testo 350 # 3 Engine Kit0350XL-4 Testo 350 # 4 Turbine Kit

Protect the longevity of the Testo 350 analyzer by pre-conditioning your sample in order to prevent wear/tear on the ana-lyzer. The current conditioning kit set-up is configured for a Testo 350 analyzer but can be configured to most analyzer set-ups with a minor change or two. Note: Does not include the Testo 350 Analyzer.

Testo 350 conditioning Kit includes:• 0517SS- Stainless Steel Coil Condensers• 9769T1- ADI Dia/Vac Pump• 9974- Finite Filter Holder• 9747- Flow meter .6-5 Lpm• 0769250- 1/4” Teflon Tubing• 0769375- 3/8” Teflon Tubing

Porta

ble A

nalyz

ers

Porta

ble A

nalyz

ers

Porta

ble A

nalyz

ers


3-5

Testo 350 XL Replacement Sensors Specifications



Part number Range accurancy Resolution Response time0350XLO2 0-25% Vol. • < 0.2% of m.v. 0.1 Vol. % 20 s (t95)

0350XLCOL 0-500 ppmH2 Comp.

• < 2 ppm (0 to 39.9 ppm)• < 5% of m.v. (40 to 500 ppm) 0.1 ppm 40 s (t90)

0350XLCO 0-10,000 ppmH2 Comp.

• < 5 ppm (0 to 99 ppm)• < 5% of m.v. (100 to 2,000 ppm)• < 10% of m.v. (2,001 to 3,000 ppm)

1 ppm 40 s (t90)

0350XLNO2 0-500 ppm • < 5 ppm (0 to 99 ppm)• < 5% of m.v. (500 ppm) 0.1 ppm 40 s (t90)

0350XLSO2 0-5,000 ppm• < 5 ppm (0 to 99 ppm)• < 5% of m.v. (100 to 2,000 ppm)• < 10% of m.v. (2,001 to 5,000 ppm)

1 ppm 30 s (t90)

0350XLNOL 0-300 ppm • < 2 ppm (0 to 39.9 ppm)• < 5% of m.v. (300 ppm) 0.1 ppm 30 s (t90)

0350XLNO 0-3,000 ppm• < 5 ppm (0 to 99 ppm)• < 5% of m.v. (100 to 2,000 ppm)• < 10% of m.v. (2,001 to 3,000 ppm)

1 ppm 30 s (t90)

0350XLHC 0.01-4% Vol. • < 400 ppm (100 to 4,000 ppm)• < 10% of m.v. (> 4,000 ppm) 0.1 ppm 40 s (t90)

0350XLH2S 0-300 ppm • < 2 ppm (0 to 39.9 ppm)• < 5% of m.v. (40 to 300 ppm) 0.1 ppm 35 s (t90)

0350XLCO2 0-50% Vol. • ± 0.3 % Vol. + 1 % of m.v. (0-25 % Vol.)• ± 0.5 % Vol. + 1.5 % of m.v. (> 25-50%)

• 0.01% Vol. (0-25% Vol.)

• 0.01% Vol. (> 25% Vol.)

10 s (t90)

CO2 (Calculated) O to CO2 max Vol. % • Calculated from O2 0.1 Vol. % N/A

Description Range accurancy Resolution

Differ. Press. 1 ± 80” H2O• < 1% m.v. (-20” to 80” H2O)• < 1% m.v. (+20” to +80” H2O)• < 0.5% m.v. (-19” to +19” H2O)

0.01” H2O

Differ. Press. 2 ± 16” H2O• < 1% m.v. (-16” to 1.2” H2O)• < 1% m.v. (+16” to +1.2” H2O)• < 0.5% m.v. (-1.2” to +1.2” H2O)

0.01” H2O

Efficiency 0-100% N/A 0.1%Flow Velocity 0-7900 ft/min N/A 10 ft/min

Current 0-20 mA • ± 0.04 mA ± 0.01 mAVoltage 0-10 V • ± 0.01 V ± 0.01 V

rpm 20-20,000 1 rpm

Temperature -40 to 2,192 F • ± 0.9 F (-40 to +212F)• ± 0.5% m.v. (+212 to +2,192F) N/A


Portable Analyzers







Specifications• Parameters Measured: Temperature, Draft Pressure, O2, CO, NO, NO-LOW• Power Requirement: 110-230V, 90-260V or rechargeable battery• Approximate Weight: 1.5 lbs.

Specifications• Up to 4 Gas Sensors (O2 plus 3 More)• Automatic Flow Controlled Sampling Pump• Integrated Pressure Sensor• Power Requirement: 110-230V, 90-260V or rechargeable battery• Approximate Weight: 1.30 lbs.

Part number Item33021 Testo 330-2 LL Kit #1 with O2, CO 33022 Testo 330-2 LL Kit #2 with O2, CO, NO & Printer

Part number Item0340S Testo 340 Standard Kit O2, C003401 Testo 340 Burner Kit O2, CO, NO03402 Testo 340 Engine Kit O2, CO, NO03043 Testo 340 Industrial Kit O2 Plus*

Porta

ble A

nalyz

ers

Porta

ble A

nalyz

ers

Porta

ble A

nalyz

ers


Testo 875 Portable Infrared Thermal Imager




Part number Item Image0875-1 Testo 875 Thermal Imager Kit0875-2 Testo 875 Thermal Imager Kit with Integrated Digital Camera

0875-2SET Testo 875 Deluxe Thermal Imager Kit with Integrated Digital Camera• Telephoto lens • Protective lens• Two-bay batter charger• Spare battery• Display sunshield

1. Detector size 160 x 120 pixelsWith 19,200 temperature measurement points, the mea-surement objects are detected in very good image quality, clearly and precisely.

2. SuperResolution technology (to 320 x 240 pixels)SuperResolution technology improves the image quality by one class, i.e. the resolution of the thermal images is four times higher.

3. thermal sensitivity < 80 mKThanks to an excellent temperature resolution of < 80 mK, even small temperature differences are visible.

4. Integrated digital cameraParallel to the thermal image, a real image of each mea-surement object is also stored.

5. automatic Hot/cold Spot RecognitionCritical temperature stati are directly displayed using the automatic Hot-Cold-Spot recognition.

6. Solar modeFor each measurement, the sun irradiation value can be entered into the camera. This value is stored for each ther-mal image.

7. Special measurement mode for detecting areas with danger of moldUsing the externally measured ambient temperature and air humidity, as well as the surface temperature, the humidity value of each measurement point is calculated and shown in the display as a real humidity image.

The thermal imager testo 875 is the reliable, solid tool for your daily use. With a temperature resolution of < 80 mK, exchangeable lenses and an integrated digital camera, you discover weak spots in buildings quickly and securely with the thermal imager testo 875. You localize leakage precise-ly, and detect defective insulation directly.

(X) optionalX StandardThe imager is delivered in a robust case incl. pro software, carrying strap, SD card, USB cable, mains unit, and Li ion rechargeable battery.


Portable Analyzers






Part number Item Image0876 Testo 876 Thermal Imager Kit

0876-SET Testo 876 Deluxe Thermal Imager Kit• Telephoto lens • Protective lens• Two-bay batter charger• Spare battery




4. Integrated digital cameraParallel to the thermal image, a real image of each mea-surement object is also stored.

5. Voice recording using headsetVoice recording allows each thermal image to be recorded with a comment. This valuable information is stored togeth-er with the thermal image.



The thermal imager testo 876 stands out thanks to its large rotatable display. This allows you to keep the display in view when thermographing in any position, securely reach-ing every corner. Thanks to exchangeable lenses, you can guarantee that you always have the right image section in your display.

(X) optionalX StandardThe imager is delivered in a robust case incl. pro software, carrying strap, SD card, USB cable, mains unit, and Li ion rechargeable battery.

Porta

ble A

nalyz

ers

Porta

ble A

nalyz

ers

Porta

ble A

nalyz

ers








4. Built-in digital camera with power lEDsParallel to the thermal image, a real image of each mea-surement object is also stored. The power LED’s guarantee optimum illumination of dark areas when recording real im-ages.

7. High temperature up to 550°cWith the high temperature option, the measuring range can be flexibly extended up to 550°C.



The thermal imager testo 881 with the best thermal sensi-tivity of < 50 mK provides highest image quality. This allows you to measure even the smallest temperature differences, and obtain high resolution IR images at any time. A wide-angle and a telephoto lens allow adaptation to the different sizes and distances of measurement objects.

Part number Item Image0881-2 Testo 881 Thermal Imager Kit

0881-2SET Testo 881-2 Deluxe Thermal Imager Kit• Telephoto lens • Protective lens• Two-bay batter charger• Spare battery• Protective sun shield with shoulder strap

3-9


Portable Analyzers





The thermal imager testo 882 in ergonomic pistol design, with 320 x 240 pixels, stands out thanks to even more pre-cise infrared images. With 76,800 temperature measuring points, it sees every detail on the measured object. This makes it even easier for you to detect anomalies and weak-nesses from greater distances, and you work even more quickly.

1. Detector size 320 x 240 pixelsWith 76.800 temperature measurement points, the mea-surement objects are detected in excellent image quality, very clearly and precisely.



4.Largefieldofviewthanksto32°lensWith the 32° standard lens, large image sections are im-mediately recognized, and the temperature distribution of the measurement object recorded at a glance.

7. High temperature up to 550°cWith the high temperature option, the measuring range can be flexibly extended up to 550°C.



Part number Item Image0882 Testo 882 Thermal Imager Kit

3-10

Porta

ble A

nalyz

ers

Porta

ble A

nalyz

ers

Porta

ble A

nalyz

ers





Testo Portable Infrared Thermal Imager Overview


Portable Analyzers

ECOM-AC (Plus)





Parameter RangeO2 0-21%CO 0-4000 ppm NO 0-4000 ppm

SO2 (option on some models) 0-5000 PPMNO2 0-500 PPMDraft 0-40.00 in. H2O

Temperature 0-1500°CDetection Method: Electro Chemical Sensors

Power Requirement: 120 V AC, 30 watts; or Lead-Acid Rechargeable BatteriesApprox. Shipping Weight: 30 lbs

The ECOM-AC (Plus) is a portable unit for the quick measurement of O2, CO, temperature, NO and NO2. The micro-processor will calculate CO2 and combustion efficiency. NO and NO2 sensors make simple determinations of these parameters. This instrument has a high flow pump assembly with an in-line water trap and particulate filter for proper conditioning of short-term samples.

The ECOM-AC (Plus) is capable of downloading into a computer for remote monitoring. The probe is 12” in length and has a 1/4” outer diameter with 10 ft. flexible high temperature hose. It also has an automatic fresh air purge. The built-in printer in this unit can automatically print at predetermined time intervals.

Part number 0703AC

Porta

ble A

nalyz

ers

Porta

ble A

nalyz

ers

Porta

ble A

nalyz

ers



Phone: (800) 223-3977 Fax: (847) 991-8924Web site: www.cleanair.com3-13

ECOM EN2 Portable Gas Analyzer

Part number 0724EN2

Features:• 2-4 Sensors• Backlit Display• High Speed thermal printer• CO sensor over-range protection• Data logging with SD/Multimedia card• On-board flow meter with digital read out• Data processing software with bluetooth• Operation manual and protective storage case• Measures O2, CO, NO, NO2, SO2 and low NOx• Ambient and Flue gas temperature measurement• CO2, efficiency, losses, excess air, & O2 correction calculations• Thermo-electric gas cooler (Peltier) with automatic moisture removal• Optional Advanced DAS software for real-time data logging to a PC

ecom en2 sensors:• O2• CO• NO• NO2

The ECOM EN2 is a compact portable combustion analyzer, offering features found on larger, more expensive units.

The ECOM EN2 is a compact portable combustion analyzer, offering features found on larger, more expensive units. Housed in a rugged aluminum frame and hard-side case, the EN2 measures up to 4 gases, from O2, CO, NO, NO2, plus probes for temperature and stack draft / pressure. The EN2 Also calculates CO2, efficiency and excess air. A strong, internal pump and peltier gas cooler with automatic condensate drain ensures proper sample conditioning, leading to bet-ter accuracy and longer sensor life. An on board printer, SD Memory Card and wireless Bluetooth are standard features. Common applications for the EN2 include set-up, maintenance and emission monitoring of natural gas, diesel, and oil fired boilers, burners, and reciprocating engines. The compact size, simple operation, and long battery life (6-8 hours) make the EN2 a perfect tool for field technicians.


Portable Analyzers




ECOM J2KN Portable Gas Analyzer

3-14

Part number 0724J2KN

Features:• 3.5+ lpm pump• On-board flow meter• Smoke test capability• On-board impact printer• Thermo-electric gas cooler• Automatic CO over-range protection• Internal pump with fresh air bypass/purge• Stack temperature and draft measurement• Moisture trap with automatic moisture dump• Operation manual and protective storage case• Ambient, flue gas, sensor temperature measurement• Wireless handheld remote control with backlit LCD display.• Sample line (15’) with probe (1’)- other lengths available• Advanced DAS 2.0 software compatible plus wireless data transmission

to your PC.• Spare consumables: filters, printer paper, smoke test disks, etc..• Analyzer with up to 5 EC sensors for measurement of: 02, CO, NO,

NO2, SO2, combustibles (CH4).• CO2, efficiency, losses, excess air, & oxygen correction calculations.

The ECOM J2KN with wireless remote control is a portable emission analyzer offering world-class performance in a rugged, user-friendly package.

The ECOM J2KN portable gas analyzer comes standard with 5 gas sensors to measure O2, CO, NO, NO2 and SO2, along with gas and ambient temperatures, stack draft & pressure, plus calculations of CO2, efficiency, excess air, and oxygen correction to 20%. The ECOM J2KN’s portable handheld remote allows complete operation of the analyzer showing all val-ues at a glance, zoom display capability, and plug-in memory up to 256 MB. The ECOM J2KN is an ideal emission analyzer where combustion controls are located away from the flue test port.

Parts

and A

cces

sorie

s




CleanAir Engineering Express carries an exten-sive line of sampling accessories to help com-plete your projects. Our large inventory allows us to ship any of these items overnight to your testing location. No more worries about down-time thanks to our large inventory of parts and accessories.

Contact us for more information on our source sampling accessories or emergency service

01492

0769250

Parts and Accessories

4-2

PaRtS anD accESSoRIES



parTs & accessories

®

0914

PageFilter Holders & Frits ........................................... 4-3 47 mm Stainless Steel Filter Holder ................... 4-3 47 mm Teflon Filter Holder .................................. 4-3 Cartridge Style Stainless Steel Filter Holder ....... 4-3 Fritted Holder ...................................................... 4-3 Disposable In line Filter ........................................ 4-3Peristaltic Pumps and Sample Pumps ............... 4-4 ADI Pumps .......................................................... 4-4 Gast Pumps ........................................................ 4-4 KNF Pumps ......................................................... 4-4 Masterflex Pumps ............................................... 4-4 Thomas Pumps ................................................... 4-4 CleanAir Pumps ................................................. 4-4Regulators ............................................................ 4-5 Brass Regulators ................................................ 4-5 Stainless Steel Regulators .................................. 4-5Heating Element ................................................... 4-6 Silicone Heaters .................................................. 4-6 High Temperature Glass Heaters ........................ 4-7 High Temperature Cable Heaters ........................ 4-7 Cartridge, Strip & Tubular Heaters ...................... 4-7temperature controllers ..................................... 4-8 Fuji Controllers .................................................... 4-8 Watlow Controllers .............................................. 4-8 CleanAir Controllers ........................................... 4-8tubing and Pipe ................................................... 4-9 Stainless Steel Tubing and Pipe ......................... 4-9 Inconel Tubing and Pipe ..................................... 4-9 Titanium Tubing and Pipe ................................... 4-9 Flexible Tubing .................................................. 4-10 Teflon® Tubing .................................................... 4-10accessories ........................................................ 4-11 Tube Compression Fittings ............................... 4-11 Amphenol Connector Parts ..................................4-8 Flowmeters, Solenoids & Solid State Relays .... 4-14 Manometers and Replacement Parts ............... 4-14 Quick Wire Connectors & Equipment Fans ...... 4-16

Parts

and A

cces

sorie

sPa

rts an

d Acc

esso

ries

Parts

and A

cces

sorie

s PaRtS anD accESSoRIES call or order online today! ®

UL Listed Mobile Power Distribution Station



240 VacoutlEtS (2)

gFcI BREaKERS

quIcK DISconnEct

PoWER

all tERRaIn Foam FIllED

tIRES

HEaVY DutY alumInum

FRamE

EaSY-WRaP BRacKEtS

WEatHERRESIStant

EncloSuRE

SuRE gRIP HanDlES

lIgHtWEIgHt PoWER coRD

StaInllESS StEEl lIFtIng

HanDlES

15 KVa PoWERtRanSFoRmER

120 Vac gFcI outlEtS (8)

SEcuRE locK anD KEY DooR

HanDlE

WEatHERPRooF In-uSE outlEt

coVERS

4-3

*Engineered for indoor/outdoor rugged locations*Slimprofileeasytomanipulatethroughtightlocations

*ul listed Portable Power Distribution E361114

Where are Power Stations used:• Utility Plants• Chemical Plants• Refineries• Job Sites• Construction Sites

• Shipping• Conventions• Restoration Servies• Entertainment• Food Processing

• Manufactruing• Emergency• Military• Telecommunications• Engineering

Parts and AccessoriesParts and Accessories


UL Listed Mobile Power Distribution Station



PaRtS anD accESSoRIES call or order online today! ®

25.5”

52”

20.5”

10”

Part number 0750

TechnicalSpecificationsWeight: ~285 lbsUL ListedMade in the USAMaterial: AluminumColor: GrayTemperature Limitations: 75°CTires: No-Flat All Terrain foam filled tiresCord: 50’ power cord (100’ power cord - optional)Voltage Rating: 480/120-240Amperage Rating: 60 ampsTransformer Type: 15 KVA, 30A PrimaryLine In: 480VAC Single PhaseLine Out: 120VAC – 240VAC Single Phase480VAC Mating Receptacle: VR642, AREA 6425 (optional)240VAC Outlet: 2 - 240VAC 20A Protected heavy duty receptacles120VAC Outlet: 8-120VAC GFCI receptacles (16 outlets)

CleanAir’s Mobile Power Distribution Station is a safe temporary 120/240VAC single split phase system perfect for most field service applications. The power station is mounted on a sturdy aluminum two-wheeled cart for easy maneuvering, even on rough terrain. It converts a single-phase 480VAC input into multiple 120V and 240V receptacles to power your entire field operation. Each of the sixteen (16) 120VAC outlets is GFCI breaker protected providing for safe outdoor usage. The two (2) 240VAC outlets are equipped with heavy duty receptacles, and all the circuit breakers are encased in a NEMA 3R weatherproof breaker box with window. When your field operations require power to several locations at one time, where standard electrical service is not readily available, no other solution compares to this Mobile Power Distribution System. *call for custom options on voltage and power connections.

4-4

made in the uSa

Parts

and A

cces

sorie

sPa

rts an

d Acc

esso

ries

Parts

and A

cces

sorie


47 mm Stainless Steel In-Line Filter Holder

4-5

Disposable Inline Filter

Stainless Steel Fritted Filter

Cartridge Style Stainless Steel Filter Holder

47 mm Teflon® In-Line Filter Holder



Part number 0561

Part number Item9974 Cartridge Style Stainless Steel Filter Holder9975 Replacement micro-fiber filter cartridge

47 mm Replacement Filter mediaPart number Item

0620 47 mm Glass0620Q 47 mm Quartz0620T 47 mm Teflon®

The 47mm stainless steel in-line filter holder has 3/8” NPT con-nections and include a stainless steel support screen and Vitron O-ring.

Part number 0558

Part number 0740F

Part number 0715PF

The 47 mm Teflon® in-line filter holder has 1/4” compression connections and includes a TFE support screen.

The cartridge style stainless steel filter holder has 1/4” NPT connections and uses a micro-fiber filter cartridge.

High Strength Sintered Stainless Steel Fritted Filter is an ex-cellent choice for keeping particulate out of your probes and lines. These 20 micron frits are cleanable and feature durable long lasting stainless steel construction with 1/4” NPT connec-tion or connection of your choice.

The disposable in line filter has a Kynar housing with 1/4” O. D. tube ends and a micro-fiber filter. The filter has a 99.99% efficiency at removing particles .01 microns and above.



Peristaltic Pumps and Sample Pumps





Part number Item9769T1 ADI Dia-Vac Pump, SS TFE Coated Head, TFE Diaphragm, 26 LPM, 24”Hg ,120 Vac.

9937 Gast Lubricated Rotary-vane Pump 120 / 240 Vac. 26.5” Max Vac. 4.5cfm open flow

9771BA Double Head Peristaltic Pump, 3 Roller Design, 120 Vac. 26ml per min, steel gears, continuous heavy duty motor

99390 Heated Head Pump, SS TFE Coated Head, TFE Diaphragm, 9 LPM, 120 Vac. 9711L KNF Diaphragm Pump (operates in any position) 115V/60Hz single head .03A9021 Masterflex Double Head Peristaltic Pump, 3 Roller Design, 120 Vac

0711R KNF Sample Pump, TFE Diaphragm, 5.5 LPM, 25”Hg, 120V w/ thermal reset99373 KNF Sample Pump, TFE Diaphragm, 5.5 LPM, 25”Hg, 120V w/ thermal reset

99373A KNF Sample Pump, TFE Diaphragm, 11.5 LPM, 25”Hg, 120V w/ thermal reset9900 Submersible re-circulation Pump 120 Vac. 1/50 HP

9900220 Submersible re-circulation Pump 240 Vac. 1/50 HP97691 Thomas Pump, TFE Coated Head, TFE Diaphragm, 120 Vac.9769 ADI Mini Dia-Vac Pump, TFE Coated Head, TFE Coated Diaphragm, 22 LPM, 22 “Hg, 120 Vac.

9769T1

97691

990099373A0711R

90219711L99390

9771BA9937

9769

Parts

and A

cces

sorie

sPa

rts an

d Acc

esso

ries

Parts

and A

cces

sorie


Cylinder Regulators




Brass Single Stage Regulators with needle Valve and ¼” nPt outletPart number cga Inlet gauge Delivery Pressure

9764B350 350 0 – 4000 PSI 0 – 50 PSI9764B580 580 0 – 4000 PSI 0 – 50 PSI9764B590 590 0 – 4000 PSI 0 – 50 PSI

Stainless Steel 316 Regulators with needle Valve and ¼” nPt outletPart number cga Inlet gauge Delivery Pressure

9764S330 330 0 – 4000 PSI 0 – 50 PSI9764S660 660 0 – 4000 PSI 0 – 50 PSI9764S705 705 0 – 4000 PSI 0 – 50 PSI

• Single Stage Brass Bar stock Body• Six Port Configuration 316L Stainless Steel Diaphragm• Custom CGA fittings and pressure ranges available.

• Single Stage 316L Stainless Steel Bar stock Body• Six Port Configuration 316L Stainless Steel Diaphragm• Custom CGA fittings and pressure ranges available.



Silicone Heaters





Part number (120 Volt) Part number (240 Volt) Width (Inches) length (Inches) total Watts01492 01482 1 35 175w01495 01485 1 72 360w01496 01486 1 80 400w01499 01489 1 120 600w014914 014814 1 140 700w014915 014815 1 180 900w014918 014818 1 216 1080w014920 014820 1 240 1200w014925 014825 1 300 1500w014930 014830 1 360 1800w014940 014840 1 480 2400w014950 014850 1 600 3000w

Silicone Rubber: Two layers of silicone rubber infused with fiberglass are vulcanized together and enclose the multiple strand wire resulting in a rugged yet flexible sheath with excellent moisture, chemical and wear resistance. Maximum temperature rating for the heat tape is 500 °F. The thickness of the flexible silicone rubber heater is 0.06”. The industrial heaters have silicone insulated wire leads of 2’ @ 18AWG. The silicone rubber heater is used in the majority of probes manufactured by CleanAir Express. The flexible heaters length ranges from 35” thru 600”. The silicone rubber heaters power supply ranges from 120 volt to 240 volt.

Parts

and A

cces

sorie

sPa

rts an

d Acc

esso

ries

Parts

and A

cces

sorie


High Temperature Glass Heaters 1400°F max temperature

4-9

Tubular Heaters

Strip Heaters

Cartridge Heaters

High Temperature Cable Style Heaters



Part number Item0491 2ft. 120v Insulated Heater 156w .5in width0494 4ft. 120v Insulated Heater 312w .5in width0495 6ft. 120v Insulated Heater 468w .5in width0496 8ft. 120v Insulated Heater 624w .5in width0699 10ft. 120v Insulated Heater 520w .5in width

04914 12ft. 120v Insulated Heater 234w .5in width04916 16ft. 120v Insulated Heater 312w .5in width

0516PH 6ft. 120v Heater (no insulation) 312w .5in width0518PH 8ft. 120v Heater (no insulation) 416w .5in width

Part number Item9120 Strip Heater 120v 450w

91201 Strip Heater 240v 450w9739 Finned Strip Heater 120v 500w

Part number Item97851 400w 120v ¼”NPT fitting

Part number Item9142 Tubular Heater 120v 500w

91421 Tubular Heater 240v 500w

Part number Item97862 112 inch 240v Cable Heater 302w .094”dia.97863 188 inch 240v Cable Heater 503w .094”dia.97223 223 inch 240v Cable Heater 3000w .125”dia.

* Heavy Insulated Heating Tape can tolerate tem-peratures up to 1400 °F.



Temperature Controllers

4-10

Amphenol Connector Parts




Part number Item

91301 Fuji Electric PXR3 series Fuzzy Logic Controller 1/32 DIN with PID Auto-tune, Nema 4x faceplate, 100-240v AC input power (50/60Hz), 8 segment ramp/soak programming, relay or SSR outputs.

91304Fuji Electric PXR3 series Fuzzy Logic Controller 1/32 DIN with PID Auto-tune, Nema 4x faceplate24v AC/DC input power (50/60Hz), 8 segment ramp/soak programming, relay or SSR outputs and retrans-mission (4-20mA DC).

91305 Watlow Temperature Controller microprocessor based 1/16 DIN, single input (switched DC), 100v-240v AC input power, and display colors red and green. (Double Output)

91307 Watlow Temperature Controller microprocessor based 1/16 DIN, single input (switched DC), 100v-240v AC input power, and display colors red and green. (Single Output)

9130M Watlow Temperature Controller microprocessor based 1/16 DIN, single input, dual output 4 digit display, NEMA 4x rating, electromechanical relay, from C, 5A, CE complaint, without contact suppression.

9130Watlow Temperature Controller microprocessor base 1/16 DIN, single input, dual output 4 digit display, NEMA 4x rating, switched dc output, non insulated, from C, 5A, CE compliant, for use with solid state relay.

9131R CleanAir Express 6 Channel replacement indicator. Rugged and dependable.

3 Pin amphenol connector PartsPart number Item

9402E 3 Pin Flanged Box Receptacle with Female Insert9403 3 Pin Cable Plug (Shell Only) 94031 3 Pin Male Insert94032 3 Pin Cable Clamp94021 3 Pin Female Insert

4 Pin amphenol connector PartsPart number Item

9409 4 Pin Cable Clamp9410 4 Pin Cable Receptacle (shell only)9411 4 Pin Cable Plug (shell only)9412 4 Pin Flanged Box Receptacle with Male Insert 9416 4 Pin Female Insert9417 4 Pin Male Insert9418 4 Pin Flanged Box Plug with Female Insert

9402E

94032

9409

9412

9418

9403

94021

9411

9416

94031

9410

9417

Parts

and A

cces

sorie

sPa

rts an

d Acc

esso

ries

Parts

and A

cces

sorie


Stainless Steel Tubing and Pipe

4-11

Titanium Tubing and Pipe

Inconel Tubing and Pipe



Part number Item9301 1/4" x .035 Welded 304 SS

9388A 1/4" Sch40 Welded 304 SS9305 3/8” x .035 Welded 304 SS

9305065 3/8” x .065 Welded 304 SS9314A 3/8” Sch40 304 SS9308 1/2" x .035 Welded 304 SS

9308085 1/2" x .085 Welded 304 SS9316 1” x .035 Welded 304 SS9321 1” x .065 Welded 304 SS

9319083 1” x .083 Welded 304 SS9318 1 1/4" SCH 5 304 SS93232 2 1/4" x .120 304 SS93233 4” x .083 304 SS9302 1/4” x 035 316 SS9306 3/8” x .035 316 SS9312 5/8” X .035 316 SS Seamless9317 1” X .035 316 SS9322 2” x .065 316 SS

Part number Item9304I 1/4" .035 Inc 6009306I 3/8” .035 Inc 6009307I 3/8” .049 Inc 6009317I 1” .035 Inc 60092534I 1 1/4" .065 Inc 60092538 1 1/2" sch80 Inc 600

Part number Item9302T 1/4" .035 Seamless9308T 1/2" .039302T5 Seamless9312T 5/8” .035 Seamless9317T 1” .035 Seamless9319T 1 1/4" .035 Seamless



Teflon® Tubing

4-12

Flexible Tubing




Part number Item9326 Gum Rubber Tubing 1/4 inch ID. X 3/16 inch wall

93261 Gum Rubber Tubing 3/8 inch ID. X 3/16 inch wall9325 Flexible PVC 3/16 inch ID. X 5/16 inch OD.

93252 Flexible PVC 1/8 inch ID. X 1/4 inch OD.9716 Neoprene Tubing 1/8 inch ID. X 3/8 inch OD.9012 Peristaltic Pump Tubing

932511 Polyethylene Tubing 1/4 inch ID. X 3/8 inch OD. 1126 Silicone Tubing 1/4 inch ID. X 3/8 inch OD.

CleanAir Express Teflon® Tubing: Description: Teflon® tubing is flexible tubing that is resistant to crimping and blockage. This is the preferred teflon® tubing for emissions measurement below 500F. For tube diameters or colors not listed here, please call. Material: Heavy Wall Polyester (PTFE) Teflon® Tube.

Teflon® is a registered trademark of DuPont. Teflon® is the brand name for the Dupont fluoropolymer plastic resins PTFE, FEP, and PFA. These three are very similar in composition, temperature limit and chemical resistance but have slightly different mechani-cal properties that make each one better suited for some specific applications. PTFE is best for most most gas sampling.

tube oD tube ID tube Wall Part number color Bend Radius **1/8” 1/16” -0.031 0769125 Natural (White) <0.3”1/4” 1/8” -0.062 0769250 Natural (White) <0.5”1/4” 1/8” -0.062 0769250C Specify * <0.5”3/8” 1/4” -0.062 0769375 Natural (White) <1.0”1/2” 3/8” -0.062 0769500 Natural (White) <2.0”5/8” 1/2” -0.062 0769625 Natural (White) <4.0”

• * Teflon® Tubing Colors Stocked are Black, Blue, gray, Green, Orange, Natural (White), Red & Yellow. If you need another color or size please call.

• ** Teflon® Tubing Bend radius is for room tem-perature bends. Heating tube to soft point prior to bending is best for permanent bends.

Parts

and A

cces

sorie

sPa

rts an

d Acc

esso

ries

Parts

and A

cces

sorie


Tube Compression Fittings

4-13

U RU UE UT UC BU

Union Reducing Union Union Elbow Union Tee Union Cross Bulkhead Union Needle Valve Tube Ends

TC MC ME MBT MRT PLG CAP

Thermocouple Connector

Male Connector

Male Elbow Male Branch Tee

Male Run Tee

Plug Cap

FC FE FRT PC RPC TEMA TEBA

Female Connector

Female Elbow Female Run Tee

Port Connector Reducing Port Connector

Tube End Male Adapter

Tube End Bulkhead Adapt

FQCB MQCB FQC MQC N F

Female Quick Connect Bulkhead

Male Quick Connect Bulkhead

Female Quick Connect

Male Quick Connect

Coarse Valve Tube Ends

Nut Ferrule

1 2 3

Example: 0418 – S - UT (¼” Stainless Steel Tee)

1 Size

2 Material

3 Configuration

0417 = 1/8” S = Stainless Steel U = Union

0418 = ¼” B = Brass RU = Reducing Union 0419 = 3/8” G = Graphite UE = Union Elbow 0420 = 1/2” T = Teflon UT = Union Tee 0421 = 5/8” K = Kynar (PVDF) UC = Union Cross 0422 = ¾” BU = Bulkhead Union

0423 = 1” TC = Thermocouple Connector MC = Male Connector ME = Male Elbow MBT = Male Branch Tee MRT = Male Run Tee

PLG = Plug CAP = Cap FC = Female Connector FE = Female Elbow FRT = Female Run Tee

PC = Port Connector RPC = Reducing Port Connector TEMA = Tube End Male Adapter TEBA = Tube End Bulkhead Adapter FQCB = Female Quick Connect Bulkhead

MQCB = Male Quick Connect Bulkhead FQC = Female Quick Connect MQC = Male Quick Connect N = Nut F = Ferrule





Graphite Ferrules

Vacuum Gauge





Part number Item0418GF 1/4” Graphite Ferrule0419GF 3/8” Graphite Ferrule0420GF 1/2” Graphite Ferrule0421GF 5/8” Graphite Ferrule0423GF 1” Graphite Ferrule0424GF 1 1/4” Graphite Ferrule

Part number Item0017 Vacuum Gauge 30” Hg (2” Diameter) U-clamp, 1/8” Npt9517 1/4” Barb Connector by 1/8” Fnpt

Specifications• Measurements: 0-30” Hg or 0-76 cm Hg• Diameter: 2.05” Thru Hole• Fitting: 1/8” Npt• Mount: U-clamp with 2 10/32 Nuts• Optional Fitting: 9517

Parts

and A

cces

sorie

sPa

rts an

d Acc

esso

ries

Parts

and A

cces

sorie


4-15

Thermocouple and O-Rings for Probe Liner

10’ Monorail System

10’ Mobile Monorail System



Part number Item031518 Thermocouple for Probe Liner

05750SSO O-ring Small Silicone Glassware E Size 116 (Amber)05750STO O-ring Small PTFE Glassware E Size 116 (Blue)

Specifications• 0315T- 2’ of Teflon Type K thermocouple wire• 9944- Thermocouple Quick Tip• 0315B- 12” of Stainless Steel Braid• 0316M- Type K Male Thermocouple

Part number Item quantity990610B 1/2-13 x 15/16” Bolt 49906C Unistrut Channel 15 ft.

990610N 1/2-13 Unistrut Nut 49906T Unistrut Trolley 199061 Wire Rope 304 1 x 19 strand 12.5 ft.99062 Hook to Hook 199063 Wire Rope Clamp 899064 Eye Bolt 2

990690 Unistrut 90° Angle 100003 Clip and Thimble Kit/Wire Rope 2

Part number Item quantity0099CA Come-Along 2013090 90° Bracket 1

0130901 90° angle Bracket 20130C Carabiner 4

0130RC Wire Rope 304 1 x 19 strand 12.5 ft.99062 Riser Clamp 1

990610B 1/2-13 by 15/16 Bolt 4990610N 1/2-13 Nut 4990690 Unistrut 90° Angle 29906C Unistrut Channel 15 ft.9906T Unistrut Trolley 1

Part number Item0099M 10’ Mobile Monorail System

Part number Item0099 10’ Monorail System



Flowmeters

4-16

Manometer Replacement Parts




Rate-master Flowmeters with SS Valve through-panel mountingPart number Range

0756 100 - 1000 cc/min0747 .5 - 5 SCFH0757 .1 - 1 LPM97482 1 - 10 LPM97483 2 - 25 LPM

65mm glass Single and Dual Float Flow meter non ValvePart number Range

9969 Steel = 0 – 2.52 LPM Glass = 0 – 1.25 LPM00151 Glass = 0 - 1.25 LPM

Visi-Float Flowmeters with SS Valve Flush - panel mountingPart number Range

9746 .15 – 1 LPM9747 .6 – 5 LPM9748 1 – 10 LPM

Visi-Float Flowmeters non Valved Flush - panel mountingPart number Range

97471 .6 – 5 LPM97481 1 – 10 LPM

Part number Item00588 Dual Column Panel Mount Manometer 0-8” H2O

00588M Dual Column Panel Mount Manometer 0-200 mm H2O0058A Manometer Adjustment Knob

00588C Manometer Type C Plug0058R Manometer Oil Red9100F Manometer Female Quick Connect 9100M Manometer Male Quick Connect

005588 0058C0058A

9100M9100F

0058

R

Parts

and A

cces

sorie

sPa

rts an

d Acc

esso

ries

Parts

and A

cces

sorie


4-17

Small Oil Jar Assembly

Large Exhaust Jar Assembly



Part number Item9948SJ Small Glass Oil Jar 9948SG Small Glass Oil Jar Gasket99481 Felt Replacement (2 per Felt Assembly)99482 Separator Felt

9948SJW Wick for Small Jar

Part number Item9948LJ Large Glass Exhaust Jar9948LG Large Glass Exhaust Jar Gasket9937LF Large Felt Assembly99483 Felt Replacement (2 per Felt Assembly)

Part number 99370

Part number 9937L



Solenoid and Pinch Valves

Solid State Relays

Quick-Wire Connectors

4-18

Equipment Cooling Fan




Part number 9129Crydom Solid State Relays offer state-of-the art Surface Mount Technology. These relays deliver proven reliability in the most demanding applications. 25A 240VAC DC

We stock many types of pinch and solenoid valves. Please call a Sales Represen-tative for price and delivery.

Part number Item Voltage9762 ASCO Pinch Valves 110 – 220 –24VDC9761 Stainless Steel 2-way 12VDC9759 Stainless Steel 3-way 12VDC9127 Stainless Steel norm/close 3-way 125psi 120V

91275 Stainless Steel 3-way multi purpose 120V91271-1 Stainless Steel norm/closes 2-way 45psi 12VDC91271 Stainless Steel norm/close 3-way 125psi 240V

Part number 0914Crouzet Solid State Relays offer state-of-art Din Rail Mount Tech-nology. These relays deliver proven reliability in the most demand-ing applications. Features include: Input LED, Din Rail Mountable, and Current Regulated Input

Part number Item91351 Straight Blade Plug 5-15 125VAC 15AMP9135A Straight Blade Plug 6-15 250VAC 15AMP91361 Plug Receptacle 5-15 125VAC 15AMP

91361220 Plug Receptacle 5-15 250VAC 15AMP

Part number Item9940 115 Vac 50/60Hz 0.021 Amp 18W 105 CFM

Impedance Protected 99401 220-240 Vac 50/60Hz 0.125 Amp 18W 105

CFM Impedance Protected Compact and ready to install, these fans are a popular choice for cooling heat-sensitive equipment.

Hinged impact resistant nylon housing provides easy access for wiring. Both are 2 pole 3 wire (3 blades –2 power plus 1 ground) Color is high-visibility yellow; 5-15 and 5-20 NEMA models Meet Fed. Spec. WC596 and are UL listed

oRDERIng notES



Date Item ordered Size qty Shipping Date Project #/ name

®

Download - Clean Air Engineering Product Catalog

Top Related