Download - Banta BLADES - O.E.M. REPLACEMENT · Banta BLADES - O.E.M. REPLACEMENT Part# OEM# Length Centre Hole Outer Hole Centre/ Centre Width Thick B B 345-082 1656143 1656143SM 16-11/16 3/4

Small Engine Parts & Accessories

300-004 18″ 3/8″ 3/8 X 1-1/2 2-1/4″ .149″

300-012 19″ 3/8″ 3/8 X 1-1/2 2-1/4″ .149″

300-020 20″ 3/8″ 3/8 X 1-1/2 2-1/4″ .149″

300-038 21″ 3/8″ 3/8 X 1-1/2 2-1/4″ .149″

300-046 22″ 3/8″ 3/8 X 1-1/2 2-1/4″ .149″

300-129 18″ 1″ 3/8 X 1-1/2″ 2-1/4″ .149″

300-137 19″ 1″ 3/8 X 1-1/2″ 2-1/4″ .149″

300-145 20″ 1″ 3/8 X 1-1/2″ 2-1/4″ .149″

FORMED LOW LIFT BLADES (While Quantities Last)300-061 18 3/8″ 3/8 X 1-1/2 2-1/4″ .149″

300-079 19 3/8″ 3/8 X 1-1/2 2-1/4″ .149″

300-087 20 3/8″ 3/8 X 1-1/2 2-1/4″ .149″

300-095 21 3/8″ 3/8 X 1-1/2 2-1/4″ .149″

300-103 22 3/8″ 3/8 X 1-1/2 2-1/4″ .149″

300-186 18 1″ 3/8 X 1-1/2 2-1/4″ .149″

300-194 19 1″ 3/8 X 1-1/2 2-1/4″ .149″

300-202 20 1″ 3/8 X 1-1/2 2-1/4″ .149″

HIGH LIFT BLADES300-418 20″ 3/8″ 3/8 X 1-1/2 2″ .149″

300-426 21″ 3/8″ 3/8 X 1-1/2 2″ .149″

300-434 22″ 3/8″ 3/8 X 1-1/2 2″ .149″

MULCHING BLADES300-533 18″ 3/8″ 3/8 X 1-1/2 2-1/4″ .149″

300-541 19″ 3/8″ 3/8 X 1-1/2 2-1/4″ .149″

300-525 20″ 3/8″ 3/8 X 1-1/2 2-1/4″ .149″

300-517 21″ 3/8″ 3/8 X 1-1/2 2-1/4″ .149″

300-509 22″ 3/8″ 3/8 X 1-1/2 2-1/4″ .149″

While Quantities Last


LOW LIFT BLADES

08-01B B

Part# Length CentreHole

OuterHole

Width ThickSmall Engine Parts & AccessoriesiAtESSmallSmall EngiEngine Pane Parts &rts & AccesAccessorieesori ssi& AtES

BLADES - UNIVERSALBLADES - UNIVERSAL Small Engine Parts & Accessories

″

360-992 20″ 3/8″ 3/8 X 1-1/2″ 2-1/2″ .187″

360-993 21″ 3/8″ 3/8 X 1-1/2″ 2-1/2″ .187″

DE-THATCHER BLADE (SPRINGS)Part# 370-0073Improves the quality of lawns by loosening and removing dead grass and old cuttings.Will adapt to almost any push mower regardless of size.Measures: 16″ Long X 2-1/4″ Wide

Part# 370-015Replacement Dethatcher Springs. For use with our 370-0073 dethatcher blade. Bolt on type - Hardware included. (Priced and Sold per pair)

370-0083Improves the quality of lawns by loosening and removing dead grass and old cuttings. Will adapt to almost any push mower regardless of size. Includes: De-thatcher springs (X2) and adapter kit, which consists of four adapters and two retaining washers. Measures: 20” Long X 2-1/4” Wide. (Comes in a Clamshell Package).

370-031Replacement Dethatcher Springs. For use with our 370-0083 dethatcher blade. Clip on type. (Priced and Sold in sets of two).

ALLEN / BANNERMAN390-170 GC1601 4-1/16 31/64 none none XXX .150

Same as our 390-039 but with metal edge inserts. Fits Grasscraft model: GC1601 and Allan model: SE1601, also used on Husqvarna and Stihl trimmers.

305-218 H192271 18-1/2 1-7/32 None None 2-1/4 .150

(1) for 18” cut. Fits Allen / Bannerman 18” cut HoverMower. For model number 218 (BA-218-SI).

ALLIS-CHALMERS - Also see Simplicity345-009 108297

202589211-9/16 1-3/8 25/64 3-1/16 2-1/2 .164

(3) for 32″ cut, Simplicity# 108297, Left hand cut

345-017 108501 2087731

13 1-3/8 25/64 3-1/16 2-1/2 .164

(3) for 36″ cut, Simplicity# 108501, Left hand cut



UNIVERSAL - SHARK TOOTH MULCHER

Part# Length CentreHole

OuterHole

Width Thick

08-02B B

BLADES - UNIVERSALBLADES - UNIVERSALSmall Engine Parts & Accessories

Small Engine Parts & AccessoriesBLADES - O.E.M REPLACEMENT

B B

Small Engine Parts & AccessoriesAccesAccessoriesoriessEngiEngine Pane Parts &rts & AASmallSmallSmall Engine Parts & Accessories

345-082 1656143 1656143SM

16-11/16 3/4 13/32 3-1/16 2 .150

(3) for 48” cut, Left hand cut blade, New style mowing decks. Fits Simplicity GTH-L,700,900,7000 series.

335-198 1737816BM1737816BMYP

21-3/16 .875 none none 2-1/4 .170

(2) for 42″ cut.

AMF - SEE NOMA - AMF / Canadiana / DynamarkARIENS

305-783 349843498451

13-15/16 5/8 none none 2 .204

03498400 / 03498451(3) for 40″ cut, fi ts Zoom models 1540, 1640, 1740, 1844, 1944, 2048, 2148, 2252, 2352, 1540 Mini-Zoom & Mini-Zoom.

305-786 2728001600500

13-15/16 5/8 none none 2-1/4 .149

(3) for 40″ cut, Mulching blade.

360-911 02961600 14-1/2 5/8 none none 2-1/2 .203

(3) for 42” cut. Shark Tooth Mulching blade. Fits ARIENS / GRAVELY models: Zoom, ZT XL series.

305-784 04265400 14-7/8 5/8 none none 2-1/4 .187

(3) for 42” cut. Fits Ariens / Gravely models: ZT42 and Zoom 42. For Ariens Zoom series zero turn mowers with 42” deck. Found on model 915323 (000101) Zoom 42 etc. NOTE: Does NOT fi t Zoom XL or MaxZoom series zero turn mowers.

355-015 00272900 15-1/4 5/8 none none 2-1/2 .204

(3) for 44″ cut, Mulching blade. Found on ARIENS, EXMARK and GRAVELY mowers.

305-453 0045020002982000

16-3/16 5/8 none none 2-1/2 .250

(3) for 44” cut and 48” cut. Fits Ariens model: ZOOM.

355-183 491910004919100

16-1/4 5/8 none none 2-1/2 .250

(2) for 32” cut or (3) for 48” cut. Heavy Duty Blade

305-603 302783027859 3027851

16-5/8 3/4 none none 2-1/2 .180

(3) for 48″ cut, Centre blade for 60″ GT deck

305-771 03123759 31237

16-5/8 3/4 none none 2-1/2 .204

3123751 / 3123759(3) for 48″ cut, for #831031 GT Tractor

305-464 3123700 16-11/16 3/4 none none 2-1/2 .203

(3) for 48″ cut deck (zero turn radius). (While Quantities Last) (NOTE: Priced Individually sold only in multiples of 3).

ALLIS-CHALMERS continued - Also see Simplicity

08-03

BLADES - O.E.M. REPLACEMENTBLADES - O.E.M. REPLACEMENT

Small Engine Parts & AccessoriesBLADES - O.E.M REPLACEMENTBLADES - O.E.M REPLACEMENT

B B

320-244 03746500 03971900

17-7/16 5/8 none none 2-1/4 .187

(3) for 50” cut. Fits Ariens / Gravely models: ZT50 and Zoom 50.

330-647 04916400 18 5/8 none none 2-1/2 .203

(3) for 52″ cut, High lift blade. For commercial walk behind mowers.

305-451 0045030003253800

18 5/8 none none 2-1/2 .250

(2) for 36” cut, (3) for 52″ cut, High lift blade. Fits ARIENS model: ZOOM.

360-918 see 330-647see 305-451

18 5/8 none none 2-1/2 .204

(2) for 36” cut or (3) for 52” cut, High Lift blade. Shark Tooth Mulching blade.

305-457 02961700 18-7/16 5/8 none none 2-1/2 .203

(3) for 54″ cut. Fits ARIENS model: Zoom.

305-247 03624700 03624751

20-5/16 3/4 none none 2-1/2 .204

03624759 / 3607059 / 36247 / 3624751 / 3624759(2) for 40″ cut front engine Riders, Models YT 13, 14 and 15 Hp

305-722 113840113845

20-1/2 11/16 3/8 3-3/4 2-3/4 .134

Used on 21″ BBC walk behind models. (While quantities last)

320-253 09081200 20-1/2 5/8 none none 2-1/2 .250

(3) for 60” cut, High Lift blade, Heavy duty blade.

305-730 0112850001137000

20-9/16 3/8 none none 2-3/4 .140

01137051 / 01137059 / 011203311285 / 11370 / 1137059 / 01182400

21″ cut, Fits 911000 series - Zone start walk behinds.

360-030 see above 20-9/16 3/8 none none 2-3/4 .164

21” cut, Shark Tooth Mulching Blade. (While Quantities Last)

305-463 1584500 21-15/16 3/4 none none 2-1/2″ .203

(2) for 42″ cut deck (ZTR)

305-494 04159600 23-3/4 1 none none 2-1/2 .203

24” cut, Fits ARIENS model 911703. KC-24 for select ARIENS & GRAVELY PRO walk behinds.

360-995 0925470009290600

24-9/16 5/8 none none 3 .250

(3) for 72” cut, Shark Tooth Mulching Blade. Fits Lazer Z model; fi ts GRAVELY PM272 series.

ARIENS continued

08-04

Small Engine Parts & AccessoriesAccessoriesEngig ne Parts & ASmallBLADES - O.E.M REPLACEMENTBLADES - O.E.M REPLACEMENT

B B

ARIENS continued305-493 27493

274935126-7/8 7/16 3/8 4 2-3/4 .187

0055430 / 02749300Fits 28” riding mowers.

305-805 27116 / 272852728551

28 3/4 3/8 11 2-3/4 .187

For 28″ Riders, made for bagger 927000 series Riders, 912000 28″ Fairway Riders (Use our 305-821 air lifts)

305-839 00351400 02532500 02728700

30 3/4 3/8 11 2-3/4 .187

02728751 / 02728759 / 25325 / 27287 / 3514

For 927000 series Riders, also replaces Maxim# 145107 mower (Use our 305-821 air lifts)

305-821 527011 5 none 5/16 3-1/2 250 .134

AIR LIFTS > Set contains: (2) defl ectors, (4) 5/16-18 X 3/4 grade #5 hex head bolts & nuts,(Use with our 305-493, 305-805, 305-839 and 305-847 Ariens blades.

AYP / HUSQVARNA / POULAN / ROPER / SEARS continued340-604 25118

4828H114-5/8 5/8 5/16 1-3/8 2-1/2 .150

(3) for 42″ cut

340-562 253219480R9484H

14-5/8 1-1/4 15/32 3 2-1/2 .150

(3) for 42″ cut, Fits Sears model 917.253250

340-025 2574225742R 7696J

15-5/16 1-1/4 15/32 3 2-1/4 .149

(3) for 44″ cut, GT series. (While Quantities Last) (NOTE: Priced Individually sold only in multiples of 3).

340-034 2503425034R

15-3/8 3/8 none none 2-1/4 .187

106635X / 122265X(3) for 44” cut, Same as Sears# 25034; Husqvarna models GT160 and YT161H.

340-035 130652 130652MS

15-3/8 5 pointstar

none none 2-1/4 .160

(3) for 44″ cut, Poulan# 532-130652

340-036 130652 15-3/8 5 pointstar


(3) for 44″ cut, Heavy duty blade, also used Poulan mowers, Poulan# 532-130652.

360-504 see above 15-3/8 5 pointstar


(3) for 44″ cut, Shark Tooth mulching blade. (While Quantities Last) (Priced individually, Sold in multiples of 3)

08-05


B B

340-092 145708 152443 163819

15-1/2 5 pointstar


(3) for 46″ cut, Mulching blade, also used on Sears model 917.251510, Husqvarna and Poulan mowers.

340-495 159705 170698176084

15-1/2 5 pointstar


(3) for 46″ cut, High Lift blade, also used on Sears, Husqvarna and Poulan mowers.

340-070 157033 15-1/2 5 Point star


(3) for 46″ cut, Heavy duty blade, also used on Sears, Husqvarna and Poulan mowers.

360-505 see above 15-1/2 5 Point star


(3) for 46” cut, Shark Tooth Mulching Blade

360-516 522 03 74-01 16-1/4 5 pointstar


(3) for 48” cut, Shark Tooth Mulching Blade. Fits DIXON RAM 48ZT, SPEEDZTR 48. Fits HUSQVARNA EZ 4220,EZ 4624, EZ 4819, EZ 4822, EZ 4824, EZ 5224, EZ 5225, EZ 5226, EZC 4824, GTH 26, GTH 27, YTH 24 and YTH 2648.

340-612 25107 16-9/16 5/8 5/16 1-3/8 2-1/2 .120

(3) for 48″ cut. (While Quantities Last) (Priced individually, Sold in multiples of 3)

340-570 25322 25322R

16-9/16 1-1/4 15/32 3 2-1/2 .187

7322H / 9485H / 9497R(3) for 48″ cut, also fi ts Roper deck# TT738-AR.

340-053 173920 180054

16-5/8 5 pointstar


(3) for 48” cut, High lift blade, Heavy duty blade

340-077 173921 16-5/8 5 pointstar





(3) for 48” cut, Shark Tooth Mulching Blade.

340-125 121798X 17-3/8 3/8 none none 2-1/4 .187

(3) for 50” cut, front engine Lawn Tractors; Husqvarna model GT180.

AYP / HUSQVARNA / POULAN / ROPER / SEARS continued

08-06


B B

340-380 137380 137380MS 532137380

17-3/8 5 pointstar


(3) for 50″ cut.

340-381 137380 17-3/8 5 pointstar


(3) for 50″ cut, Heavy duty blade, also fi ts Husqvarna and Poulan mowers.



(3) for 50″ cut, Shark Tooth mulching blade.

340-252 165560 170037 426323

18 5 pointstar


Fits 36″ rear discharge tractors, Mulching blade, Left hand blade.

340-253 165561 170038 426322

18 6 pointstar


Fits 36″ rear discharge tractors, Mulching blade, Right hand blade, Left Hand Cut.

340-182 18725524541

18-1/4 5 point star


(3) blades for a 54″ cut. Mulching Blade. Fits AYP / Husqvarna, Poulan Pro and Craftsman.

340-588 105210X25645

18-3/16 3/8 none none 2-1/2 .134

71285 / 75270 / 98111

(2) for 36″ cut, fi ts Sears deck# LO239AR

340-016 120262X126338X110785X

18-3/16 3/8 none none 2-1/4 .187

143969(2) for 36″ cut, High lift blade

340-153 127841 138496

18-3/16 5 point star


(2) for 36″ cut

340-154 131321 137415



138496(2) for 36″ cut, Heavy duty blade.

360-513 see above 18-3/16 5 point star




08-07


B B

340-148 140101 18-3/8 5 pointstar


(2) for 36” cut.

340-180 187254 18-1/2 5 point star

none none 3 .187

(3) for 54″ cut, Standard lift blade, fi ts Craftsman, Husqvarna and Poulan Pro mowers.

340-146 112053187256

18-1/2 5 point star


33954 / 532187254 / 532187256 / 539112053 / 575938401 / 777187256 / 917187254 / 917532187254 / 917532187256 / 917539112053 / 917777187256.

(3) blades for a 54” cut. High Lift Blade - Heavy Duty. Fits Husqvarna, Poulan Pro and Craftsman. NOTE: (For Std. Lift blade see our 340-180 or Shark tooth see our 360-502).



(3) blades for a 54” cut. Shark Tooth Mulching Blade.

340-047 427984 19 5 point star


LH Blade. Fits 38” Center rear discharge models CTH2038, CTH2238, CT 151 / 131.

340-048 427985 19 5 point star


RH Blade. Fits 38” Center rear discharge models CTH2038, CTH2238, CT 151 / 131. Left Hand Cut.

340-162 127842138497



(2) for 38″ cut,

340-164 131322 138497

19-5/16 5 pointstar


(2) for 38″ cut, Heavy duty blade

340-079 134148 134148X 139744

19-5/16 5 pointstar


139744MS / 24692 / 532134148 / 532139774(2) for 38″ cut, Mulching blade

340-081 193957 19-5/16 5 point star


(2) for 38″ cut, Mulching blade / Heavy duty blade, 3 in 1 blade




340-022 121263X 123431X 143978X

19-5/16 3/8 none none 2-1/4 .187

(2) for 38″ cut, High Lift Blade


08-08


B B

340-240 25741 25741R

19-5/16 1-1/4 15/32 3 2-1/4 .149

4673J1 / 76945 / 7694J

(2) for 38” cut. (Priced Individually - Sold ONLY in Multiples of 2)

340-133 104418X 104418XR 532 10 44-18

19-5/16 3/8 none none 2-1/4 .149

(2) for 38” cut. Replaces AYP 25744. Use with our 340-042 for bagging.

340-042 100669K 106634X

19-3/8 3/8 none none 2-1/4 .187

24691 / 25036 / 25036R / 332106634

(2) for 38″ cut, Heavy duty blade, Use with our 340-133 for bagging

340-012 33203 33204

19-15/16 5/8 3/8 1-7/8 2-1/2 .149

56400 / 56400R / 69229 / 80204 / 850972For 20″ walk behind mowers.

340-041 25744 19-15/16 5/8 3/8 1-7/8 2-1/2 .149

Mulching blade - used on Sears mowers (Use with our 405-191 blade adapter)

360-903 see above 19-15/16 5/8 3/8 1-7/8 2-1/2or 3

.149

.134

For 20” walk behind mowers. Shark Tooth Mulching Blade

340-075 103523X103254XHusky# 532 10 35-23

20 3/8 none none 2-1/2 .149

Fits 20″ walk behind mowers. (While Quantities Last)

340-051 145106129277

20 5/8 3/8 1-7/8 2-1/4 .134

131694 / 133346 / 134871 / 752233 / 700972 / 751646Mulching blade for 20″ walk behind mowers. (Used on Craftsman mowers)

340-044 145106 204114884

20 5/8 3/8 1-7/8 2 .134

204340218 / 752233Mulching blade for 20″ walk behind mowers.

340-484 168720 175450 180583

21 5 point star


Fits 42″ rear discharge, Left side blade, Right hand rotation.

340-485 168721 175451 180584

21 6 point star


Fits 42″ rear discharge, Right side blade, Left hand rotation.


08-09


B B

340-254 165833 165833B

21 5/8 3/8 1-7/8 2-1/4 .134

175065 / 176135 / 189028 / 406706 / 191890X428 / 194406X428Mulching blade for 21″ cut, walk behind mowers.

340-071 159267 21 5/8″ 3/8″ 1-7/8 2-3/4 .134


340-178 127843 131323

21 5 point star


138498 / 138971(2) for 42″ cut.

340-177 127843 138498

21 5 point star


138971(2) for 42″ cut, Heavy duty blade with notch.

340-179 127843 138498

21 5 point star


138971(2) for 42″ cut, Heavy duty blade without notch.

360-500 see above 21 5 point star


Shark Tooth mulching blade


none none 3 .164

(2) for 42” cut, Shark Tooth Mulching Blade. (For standard blade see our 340-178).

340-066 133128 134149

21 5 point star


24676 / 422719Mulching blade, fi ts Sears model 917.270722

340-069 139775 21 5 point star


Mulching Blade - * HEAVY DUTY * version of our 340-066, (2) for 42″ cut.

340-057 175064 175064D

21-1/8 5/8 3/8 1-7/8 2-3/4 .134

180459, 406706 / 406712Mulching blade. Fits 21″ cut walk behind mowers with Honda engines.

360-507 see above 21-1/8 5/8 3/8 1-7/8 2-1/2 .187

Shark Tooth Mulching Blade.

340-008 85097369334

21-3/4 5/8 3/8 1-7/8 2-1/2 .149

33214 / 33219 / 56401 / 8021 / 33214 / 33219 / 406713 / 56401701213 / 7133219 / 850973 / 91733219,

For 22″ walk behind mowers.


08-10


B B

340-256 752234204114-886

21-3/4 5/8 3/8 1-7/8 2 .134

204335256Fits 22″ mulching mowers. Sears model 917.373680 (Use with our 405-752 and 405-753 blade adapters).

340-236 114886 134768

21-3/4 5/8 3/8 1-7/8 2-1/4 .134

141114 / 141443 / 157101 / 192682 / 335256 / 406713 406713X431 / 700973 / 91333256 / 91333269

22″ cut, walk behind, Mulcher Fits models HW706D, HW906D, HWRBSP22525A, HWT450A, HWT450B, J455SDC and J555RDEB. (Use with our 405-752 and 405-753 blade adapters).

300-513 042592945866956866

21-3/4 5/8 3/8 1-7/8 2-1/2 .149

For 22″ Sears mulching mowers. (Use with our 405-191 blade adapter, also can be used with the newer 405-752 and 405-753 blade adapters).

360-511 see above 21-3/4 5/8 3/8 1-7/8 3 .149

For AYP / Husqvarna 22” walk behind mowers. Shark Tooth Mulching blade.

340-620 103256X 103524X 532 10 35-24

21-3/4 3/8 none none 2-1/2 .149

For 22″ Sears walk behind mowers. (Also replaces Husqvarna / Jonsereds / Poulan Pro # 532-103524, models PP845P, PP8225A & EX840PAR)

340-376 420463421825

22 5 point star


For AYP / Husqvarna equipment.

340-023 421825437601

22 5 point star


Fits AYP / Craftsman / Husqvarna 22″ walk-behind mowers

360-512 244001244002

22 5 point star


Fits Husqvarna 22” Walk-behinds.Fits models: HU550F, HU550FH, HU675FE, HU700F, HU700L. Commercial mulching blade with the 5 point star hole.

340-006 405380 23 5 point star


High Lift / Mulching Blade (2) blades for 46″ cut, for 2007 and newer.Models: PB19546LT, YTH2146XP, YHT2546, YT2246LS, 2346XLS, RZ4622, RZ4623 and Poulan 19546LT.

340-010 403107405380

23 5 point star


(2) blades for 46″ cut, Heavy duty blade (H.D. version of our 340-006)



(2) for 46” cut. Shark Tooth Mulching Blade.


08-11


B B

340-005 419274Husky# 532 41 92-74

29-5/8 5 point star

none none 2-1/4″ .170

(1) for 30″ cut. Mulching blade. Fits 30″ model PXT12530 / 960460008; also fi tsHusqvarna models: SRD17530, YTH23V42, CTH126, CT126, 455 Rancher, & Other Lawn Mowers.

360-514 419274777419274917774419274

29-5/8 5 pointstar

none none 3 .149

(1) for 30” cut. Shark Tooth Mulching blade. Fits AYP / Husqvarna 30” model: LT2213C, LT2213CA, LZ11577, LZ1577HRB, LZ1577RB, PO12530LT, PXT12530 and 960460008. NOTE: For standard mulching blade see our 340-005.

335-116 5405325643

30-1/16 7/8 X 1 none none 2-1/4 .149

For 30″ cut riding mowers, High Lift blade for grass bag models. Murray# 54053E701 and 24868E701 (W.Q.L)

BOBCAT / RANSOMES310-102 112111-01 16-1/4 5/8 none none 2-1/2 .203

(2) for 32″ cut, (3) for 48″ cut, High lift blade. Used on XM series.

355-183 03239 32061

16-1/4 5/8 none none 2-1/2 .250

32061A / WM132061 / WMTA32061

(2) for 32″ cut, (3) for 48″ cut, Heavy duty blade.

360-916 32061A WMTA3206

16-1/4 5/8 none none 2-1/2 .204

(2) for 32″ cut, (3) for 48″ cut, Shark Tooth Mulching Blade

310-110 112111-02 18 5/8 none none 2-1/2 .203

(2) for 36″ cut, High lift blade, Used on XM series.

310-052 11211102 32022A

18 5/8 none none 2-1/2 .250

32022HD / WM132022

(2) for 36” cut, (3) for 54” cut, Heavy duty blade.

360-918 see above 18 5/8 none none 2-1/2 .204

(2) for 36” cut or (3) for 52” cut. Shark Tooth Mulching blade.

310-037 72039 72039BWM172039

21 3/8 3/8 2 2-1/2 .187

For 21″ cut walk behind mowers. (Use our 400-275 blade adapter).


08-12


B B

BOBCAT / RANSOMES continued310-078 42180B

WM142180B21 5/8 none none 2-1/2 .240





(3) for 61” cut, Heavy duty blade. Shark Tooth mulching blade.

310-086 112111-03 21 5/8 none none 2-1/2 .250

(3) for 61″ cut, High lift blade. Used on XM series.

310-072 112243-03 21 5/8 none none 2-1/2 .250

(3) for 61″ cut, Standard lift blade. Use on XM series, 956 - 10-1/2 ft deck, 7 blades.

310-060 11211-0442139BWM142139B

25 5/8 none none 2-1/2 .250


BOLENS / TROY BILT (also see MTD)335-453 942-0612

742-061214-13/16 6 point

star (5/8)3/8 2-1/2 2-1/2 .149

(1) 335-453 and (2) 335-452 for 46″ cut - star center hole, centre blade, 3 in 1 mulching blade, 1999 and after, fi ts auto drive step through tractors.

310-326 172-7926177-2144

15-5/16 3/8 3/8 2-3/4 2 .187

(3) for 42″ cut. Fits models 18300, 30042R and 30042S - centre mount mowers.

335-452 742-0611 942-0611

16-3/8 6 pointstar (5/8)

3/8 2-1/2 2-1/2 .149

(2) 335-452 and (1) 335-453 for 46″ cut - star center hole, outside blades, 3 in 1 mulching blade 1999 and after

310-300 173857117721451730412

17 3/8 3/8 2-3/4 2 .204

(3) for 48″ cut, fi ts models 30048S, 30048E, 18336 and 19211.

310-089 191091718139643100980

17-7/8 9/16X3/4

5/16 none none .203

(2) for 33” cut, Mulching blade. Fits Troy Bilt wide cut mower models: 34087, 34087C, 34089, 34089C, 34342, 34343.

08-13


B B

325-507 742-04053A 942-04053A

17-7/8 6 pointstar (5/8)


(3) for 50” cut - Heavy Duty blade. Fits Cub Cadet 50” cut model RZT50 series and also found on Toro models: LX500 and GT2100 with 50” cut decks. (Found on MTD rider model#s 13AA925P004, 17AF2ACP004, 17BF2ACP011). NOTE: For standard duty blade see our 325-510.

360-076 see above 17-7/8 6 pointstar (5/8)

none none 2-1/2” .187

(3) for 50” cut, Shark Tooth Mulching blade.

345-116 1748302 18-1/2 3/4 13/32 2-9/16 2-1/2 .187

(1) 345-116 and (1) 345-117 (W.Q.L.) for 36” cut., Left hand side. (Use with deluxe grass catcher). RH side is W.Q.L.

310-164 17476401772335

18-1/2 3/4 13/32 2-9/16 2 .187

(2) for 36″ cut. Fits models 300365, 310365, 30036S and 31036S

310-298 17228831725522

18-3/4 3/8 3/8 2-3/4 2 .187

(3) for 52” cut. Fits Bolens / Troy Bilt: 18110 and 19212.

335-610 942-0610742-0610

19-5/16 6 pointstar (5/8)

5/16 2-1/2 3 .149

(2) for 38” cut, with star center hole. (Found on MTD rider model# 13AC762F000, 13AC762F065, 13AC76LF031, 13AC76LF055).

335-549 942-0610742-0610

19-5/16 6 pointstar (5/8)

5/16 2-1/2 2-3/4 .149

(2) for 38” cut, star center hole, 3 in 1 mulching blade, deep deck - 1992 and after. (Found on MTD rider model# 13AC762F000, 13AC762F065, 13AC76LF031, 13AC76LF055).


5/16 2-1/2 2-3/4 .149

(2) for 38” cut, star center hole, Shark Tooth Mulching Blade.

310-081 17643813101220

20-15/16 1/2 3/8 2-1/2 2 .187

Fits 21″ cut walk behind, Mulcher.

310-318 189-3850 21-13/16 1/2 3/8 2-1/2 2 .187

Fits 22″ cut walk behind, Mulcher. (While Quantities Last)

335-616 942-0616742-0616

21-3/16 6 pointstar (5/8)

5/16 2-1/2 3 .149

(2) for 42″ cut, star center hole.

335-551 942-0616742-0616

21-3/16 6 pointstar (5/8)

5/16 2-1/2 2-3/4 .149

(2) for 42” cut, star center hole, 3 in 1 mulching blade, deep deck - 1997 & after; autodrive 1999 & after


5/16 2-1/2 2-3/4 .149

(2) for 42” cut, star center hole, Shark Tooth Mulching Blade.

BOLENS / TROY BILT continued (also see MTD)

08-14


B B

310-209 1755990 22-3/16 1/2 3/8 2-1/2 2 .187

Fits 22″ cut walk behind, Mulcher. (While Quantities Last)

BUNTON310-516 PC1255

PL405516 5/8 none none 2-1/2 .203

(2) for 32″ cut, (3) for 48″ cut, Standard Lift blade.

310-197 PL4855 16-1/2 5/8 none none 2-1/2 .203

(3) for 48″ cut, Fits gear drive and hydro drive midsize ″V″ deck models.

330-696 PL4205 16-1/2 5/8 none none 2-1/2 .203

(3) for 48″ cut, High lift blade. Fits gear drive and hydro drive midsize ″V″ deck models.

360-917 PL4205PL4855

16-1/2 5/8 none none 2-1/2 .204

(2) for 32” cut or (3) for 48” cut, Shark Tooth mulching blade.

310-505 PL7329 17 5/8 none none 2-1/2 .250

(3) for 50″ cut, for ZTR models, High Lift blade.



330-647 PL4206 18 5/8 none none 2-1/2 .203

(2) for 36″ cut, (3) for 52″ cut. High Lift blade. For commercial walk behind mowers.



310-506 PL7441 20-1/2 5/8 none none 2-1/2 .250

(3) for 60″ cut ZTR, High Lift blade.


(3) for 60″ cut ZTR, Shark Tooth mulching blade.

340-020 PC005 21 5/8 none none 2-1/2 .203

(2) for 42” cut or (3) for 61” cut, Replaces our# 340-059.



BOLENS / TROY BILT continued (also see MTD)

08-15


B B

355-020 5004445150056498

18 1/2 none none 2-1/2 .203

(3) for 52” cut, Low lift blade. Fits model: FMD52.

310-069 5005649450034306

19 1/2 none none 2-1/2 .250

(3) for 54” and 55” cut,Fits Bush Hog models: CZ2355, ZT18, ZT180, ZT22, ZT22-W, ZT220, ZT230, ZT25, ZT250 and ZT30-D.

345-043 50034306 19 1/2 none none 2-1/2 .250

(3) for 54” and 55” cut.

360-848 19 1/2 none none 2-1/2 .250

(3) for 54” and 55” cut. Shark Tooth Mulching blade, Heavy Duty blade.

310-071 82324 21 1/2 none none 2-1/4 .250

(3) for 60” cut.Fits Bush Hog models: ERM, FTH, RDTH, TH, M2260, M2360, M2560, M2560K, M2261, M2361, M2561, M2561K.

360-104 88668 21 1/2 none none 3 .250

(3) for 60” cut, Shark Tooth Mulching Blade. Fits Bush Hog ATH and FTH.

310-034 8232588325

25 1/2 none none 2-1/4 .250

88773 / 95755 / 50029160 / 50034300 / 50034307 / 50056495(3) for 72” cut. Heavy Duty / Medium lift blade.Fits BUSH HOG models: FTH, PX2873, PZ3073, RDTH, TH,ZT18, ZT180, ZT22, ZT22-W, ZT220, ZT220-W, ZT230, ZT25, ZT250, ZT30D.

310-030 8232595755

25 1/2 none none 2-1/2 .203

50029160 / 50034300 / 50034307 / 50056495(2) for 48” cut, (3) for 72″ cut, Mulching blade. Fits Bush Hog models ATH, FTH.

CANADIANA - SEE NOMA - AMF / Canadiana / Dynamark

CARONI305-141 59006200 20-1/4 3/4 none none 2 .250

(3) for 59″ cut, model TC490N.

CASE / INGERSOLL310-763 C24442

C1226215-9/16 1-1/4 13/32 2-5/8 2-1/2 .187

(3) for 44″ cut, Left hand cut blade.

310-366 C31572 17 7/8 X 1-1/4


(3) for 48″ cut.

BUSH HOG

08-16


B B

335-136 H1666 16-15/16 1/2 none none 2-1/2 .203

(3) for 48″ cut, Low Lift blade for ZTR mowers.

335-123 H1714 16-15/16 1/2 none none 2-1/2 .203

(3) for 48″ cut, High Lift blade.

320-547 H1667 21 1/2 none none 2-1/2 .250

(3) for 61” cut, Heavy duty blade, For ZTR mowers.

CRAFTSMAN - SEE AYP / HUSQVARNA

CUB CADET (also see MTD)325-761 47327R1

473427R110-1/4 3/4 none none 2-1/2 .203

490470 / 7423001 / 7593400 / 7593811 / 7593836

(2) 325-761 and (1) 325-779 for 38” cut. Models 1963 thru 1968. NOTE: ONLY SOLD IN SETS. (While Quantities Last).

325-787 477598R3 490471R1

11 3/4 none none 2-1/2 .203

7593844 / 7593848

(2) 325-787 and (1) 325-795 for 42″ cut. Models 1968 thru 1973.

325-803 487762-R1490472-R1

14-1/2 3/4 none none 2-1/2 .203

490472 / 759-3845

(2) 325-803 and (1) 325-779 for 48″ cut. Models 1968 thru 1973. NOTE: ONLY SOLD IN SETS. (While Quantities Last)

325-134 742-3010 759-3398

14-7/8 3/4 none none 3 .203

759-3818 / 942-3010

(1) 325-134 and (2) 325-142 for 46″ cut. Centre blade on 46″ deck.

325-878 742-04016 759-04020 942-04016

14-7/8 3/4 none none 2-1/2 .204

(1) 325-878 and (2) 325-880 for 46” cut, 3 in 1 blade, Centre blade for 46” cut. Fits deck series 1500, 1529, LT1045, LT1046 and GT1222.

COUNTRY CLIPPER also refer to SNAPPER

08-17


B B

335-453 742-04124 759-04106 942-04124

14-7/8 6 point star (5/8)

3/8 2-1/2 2-1/2 .149

(1) 335-453 and (2) 335-452 for 46” cut - star center hole, CENTER blade. Fits CUB CADET, MTD, TORO, TROY BILT etc. 3 in 1 mulching blade. FITS Cub Cadet i1046 tractor (2007 and older) 17AF9BKH709, 17AF9BKH710, 17AF9BKH756, 17RF9BKH756; LT1045 tractor (2007 and older) 13AX11CH710, 13AX11CH712, 13AX11CH709, 13AX11CH756, 13BP11CH710, 13BP11CH709, 13BP11CH756, 13RX11CH756; LT1045 tractor (2008 and newer) 13AX11CH009, 13AX11CH010, 13RX11CH056, 13RX11CH256, 13AX11CH056, 13AX11CH256; LT1046 tractor (2007 and older) 13AP11CH710, 13AP11CH709; LT1046 tractor (2008 and newer) 13AP11CH010; LT1046 tractor (2001) 14AJ808H101; for 46” deck.

325-884 742-04124 942-04124

14-7/8 6 point star (5/8)

3/8 2-1/2 2-1/2 .203

(1) 325-884 and (2) 325-885 for 46” cut. Heavy Duty Blade. Centre blade. Fits LT1046 and i1046 series mowers. For star hole replacement blade.



(1) 360-607 and (2) 360-609 for 46″ cut, Shark tooth mulching blade.

325-837 597-04C1742-3002

15-1/8 3/4 none none 2-1/2 .203

759-3812 / 942-3002(3) for 44″ cut, current models.

325-879 1008616 2005020

15-7/8 3/4 none none 3 .204

01008616 / 02005020

(3) for 44″ cut, High lift blade. Fits Z Force Zero Turn Riders.

325-873 742-3036 759-3939 942-3036

16 3/4 5/16 2-1/2 2-1/2 .203

(3) for 44″ cut on mowers since 2001.

325-811 489393-R1490475-R1759-3847

16-1/16 3/4 none none 2-1/2 .203

(2) 325-811 and (1) 325-829 for 48” cut. NOTE: ONLY SOLD IN SETS.

325-142 742-3011 759-3819

16-1/4 3/4 none none 3 .203

759-3397 / 942-3011 / 742-3016 / 759-3822

(2) 325-142 and (1) 325-134 for 46” cut, (2) for 32” cut, outside blade for 46” deck.

325-880 742-04015759-04019

16-1/4 3/4 none none 2-1/2 .204

(2) 325-880 and (1) 325-878 for 46″ cut. 3 in 1 blade. Outer blade. Fits deck series 1500, 1529, Lt1045 and LT1046.

CUB CADET continued (also see MTD)

08-18


B B

335-452 742-04125942-04125

16-1/4 6 pointstar (5/8)

3/8 2-1/2 2-1/2 .149

(2) 335-452 and (1) 335-453 for 46” cut - star center hole, OUTSIDE blades. Fits CUB CADET, MTD, TORO, TROY BILT etc. 3 in 1 mulching blade. FITS Cub Cadet i1046 tractor (2007 and older) 17AF9BKH709, 17AF9BKH710, 17AF9BKH756, 17RF9BKH756; LT1045 tractor (2007 and older) 13AX11CH710, 13AX11CH712, 13AX11CH709, 13AX11CH756, 13BP11CH710, 13BP11CH709, 13BP11CH756, 13RX11CH756; LT1045 tractor (2008 and newer) 13AX11CH009, 13AX11CH010, 13RX11CH056, 13RX11CH256, 13AX11CH056, 13AX11CH256; LT1046 tractor (2007 and older) 13AP11CH710, 13AP11CH709; LT1046 tractor (2008 and newer) 13AP11CH010; LT1046 tractor (2001) 14AJ808H101; for 46” deck.

325-885 742-04125 942-04125

16-1/4 6 pointstar (5/8)

3/8 2-1/2 2-1/2 .203

(2) 325-885 and (1) 325-884 for 46” cut. Heavy Duty Blade. Outer / Side blades. Fits LT1046 and i1046 series mowers. For star hole replacement blade.



(2) 360-609 and (1) 360-607 for 46″ cut, Shark Tooth Mulching Blade.

325-868 742-3019 759-3825

16-1/2 3/4 5/16 2-1/2 2-1/2 .204

942-3019(3) for 48” cut, Standard lift blade. Fits garden tractor GT models 2000 & Pro mid sized walk behinds.

325-856 742-3025759-3826

16-1/2 3/4 5/16 2-1/2 2-1/2 .203

942-3025(3) for 48″ cut, High Lift blade. For new style decks.

325-859 742-3028759-3856

16-1/2 3/4 none none 2-1/2 .203

942-3028(3) for 48” cut, mulching blade for new style decks.(NOTE: PRICED INDIVIDUALLY - SOLD ONLY IN MULTIPLES OF 3)

325-881 1004772 16-1/2 3/4 none none 3 .203

Fits Cub Cadet Z Force decks, Takes (3) for 48” cut, High lift blade, round centre hole. (NOTE: PRICED INDIVIDUALLY - SOLD ONLY IN MULTIPLES OF 3).

325-861 1005336 01005336P

17 3/4 none none 3 .204

02005017 / 1005336 / 742-04417 / 942-04417(3) for 48” cut, High lift blade. Fits models: ENFORCER 48,L48 Tank L, M48 Tank, Recon 48, Tank 48, Tank LZ-48, Tank SZ-48, Z-Force Pro 48 and Z-Force S 48.

325-845 59705-C1 742-3003

17-3/16 3/4 none none 2-1/2 .203

759-3813 / 942-3003(3) for 50″ cut.

325-500 742-05052A942-05052A

17-1/4 6 pointstar (5/8)

3/8 3 2-1/2 .150

(3) for 50” cut, star centre hole. Mulching blade / 2-in-1 blade. Side discharges and mulches. Fits 50” Lawn Tractor and RZT Mowers, 2015 and after. Fits Cub Cadet LX50, RZT-L50, Massey Ferguson MF50-22ZT, Rover RZT-50.


08-19


B B

325-829 489392-R1759-3846

17-5/8 3/4 none none 2-1/2 .203

Requires (1) 325-829 and (2) 325-811 for 48” cut. NOTE: ONLY SOLD IN SETS.

325-510 742-04053A742-04053B 742-04053C

17-7/8 6 pointstar (5/8)


942-04053A / 942-04053B / 942-04053C / 742-04053C0637(3) for 50” cut - Standard Duty blade. Fits Cub Cadet 50” cut models: LT1050 and RZT50 series

325-507 742-04053A742-04053B 742-04053C

17-7/8 6 pointstar (5/8)


942-04053A / 942-04053B / 942-04053C / 742-04053C0637(3) for 50” cut - Heavy Duty blade. Fits Cub Cadet 50” cut model RZT50 series & (Found on MTD rider model#s 13AA925P004, 17AF2ACP004, 17BF2ACP011). NOTE: For standard duty blade see our 325-510

325-511 742-04056742-04056A

17-7/8 6 pointstar (5/8)

3/8 3 2-1/2 .149

742-04056A-0637 / 742-04056B / 742-04056C942-04056 / 942-04056A

(3) for 50” cut - Super High Lift blade.Fits Cub Cadet Z Force 50” cut models: LT1050 and RZT50 series.


none none 2-1/2” .187


325-887 742-04068 759-04047 942-04068

17-7/8 3/4 none none 2-3/8 .164

(3) for 50” cut, high lift blade for Z Force deck. For 1000 series hydrostatic lawn tractors and models LT1024 and LT1050.

325-506 754-04068 759-04047954-04068

17-7/8 3/4 none none 2-1/2 .187

(3) for 50″ cut, Fits 1000 series Hydrostatic lawn tractors, model LT1024, Heavy duty blade



325-505 742-04154942-04154942-04154A

17-7/8 15/16 X11/16


(2) for 33” cut walk behind. Fits Cub Cadet CC760ES and CC760; requires 2 for 33” deck.

325-168 01010168 01010168-0637

17-29/32 3/4 none none 2-1/2 .204

(3) for 50” cut, High lift blade, fi ts ZTR Force and Tank commercial models.

325-159 742-3007759-3815

18-5/16 3/4 none none 2-1/2 .203

2) for 36” cut. (NOTE: PRICED INDIVIDUALLY - SOLD ONLY IN MULTIPLES OF 2).


08-20


B B

325-314 742-3013 759-3820

18-1/2 3/4 none none 3 .203

759-3841(3) for 54″ cut garden tractor and Pro mid sized walk behind mower. (Long cutting edge)

360-608 742-0677 942-0677

18-1/2 6 pointstar (5/8)

5/16 2-1/2 3 .203

(3) for 54″ cut, Shark Tooth Mulching Blade. Fits 1500 Tractors and RZT’s with 54” decks. (Standard blade see 335-475)

325-501 742-05056742-05056A942-05056A

18-5/8 6 pointstar (5/8)

3/8 3 2-1/2 .150

(3) for 54” cut, star centre hole. Mulching blade / 2-in-1 blade. Blade for 54” Cub Cadet Fabricated Deck RZT. Fits 2013-Up Cub Cadet RZT 54” Zero Turn Mowers and 2015-Up Cub Cadet XT1-2 series tractors with 54” Deck.

335-447 742-0739 942-0739

19 15/16 X11/16

5/16 2-1/2 2-1/4 .125

Fits 19” walk behinds. Fits bowtie centre hole. Fits CUB CADET models: CC189, CC500 and CC550ES, and CC550SP, 19” walk behind and MTD / YARDMAN 19” walk behind; 11A-18M9002 (2010 and 2011), 11A-18MZ202 (2010 and 2011), 12A-18M7002 (2010 and 2011) and 12AE-18JA002 (2010 and 2011).

325-862 942-0441601005380

19 3/4 none none 3 .204

01005337 / 1005337 / 02005018

(3) for 54” cut, High lift blade. Fits Cub Cadet Enforcer 54, M54 Tank and Z-Force Pro 54.

335-430 742-0675942-0675

19-1/4 6 pointstar (5/8)

5/16 2-1/2 2-1/4 .164

742-0675-637 / 942-0675-637

(2) for 38” cut, with star center hole, low lift blade. Fits 38” cut Cub Cadet / MTD 700 series mowers.

325-183 742-3009759-3817

19-3/8 3/4 5/16 2-1/2 3 .204

(2) for 38″ cut front engine riders. Models 1015, 1020, 1030, 1715 and 1720.

325-175 742-3009759-3817

19-3/8 3/4 none none 3 .203

(1) 325-175 and (1) 325-167 for 38” cut. (Standard Lift). Fits Cub Cadet models: 2130, 2135.

325-167 742-3008759-3816

19-3/8 3/4 none none 3 .203

(1) 325-167 and (1) 325-175 for 38” cut. (High Lift). Fits Cub Cadet models: 2130, 2135.

325-857 759-3829 742-3032

19-3/8 3/4 5/16 2-1/2 2-3/4 .187

942-0437A(2) for 38” cut. Mulching blade for models 1515, 1525, 2130, 2135, 2146 and LT2138.

325-753 464350B1 19-7/8 3/4 1/2 2-1/4 2 .187

(2) for 38” cut. Measures: 19-7/8” Long (measured from cutting tip to cutter tip) (NOTE: PRICED INDIVIDUALLY - SOLD ONLY IN MULTIPLES OF 2). (While Quantities Last).


08-21


B B

325-779 487761R1 490476R1

20 3/4 none none 2-1/2 .203

742-3000 / 742-3399 / 759-3399 / 759-3810(1) 325-779 and (2) 325-761 for 38″ cut or (1) 325-779 and (2) 325-803 for 48″ cut. Models 1968 thru 1973.NOTE: ONLY SOLD IN SETS. (While Quantities Last)

325-144 100471901004719-0637

20-1/2 3/4 none none 3 .203

(3) for 60” cut. Fits Cub Cadet & MTD Pro “ZERO TURN’s” with stamped decks. Found on 3660 & Z Force & some Tanks.

360-077 see above 20-1/2 3/4 none none 3 .203


325-852 117453C1 20-3/4 3/4 none none 2-1/2 .204

(3) for 60” cut, model 3160A. (NOTE: PRICED INDIVIDUALLY - SOLD ONLY IN MULTIPLES OF 3).

335-814 742-0563742-0721

20-15/16 53/64 13/32 2-1/2 2-1/4 .134

942-0721 / 942-056321″ cut, mulching blade for models 312R, 313R, 315R, 488, 828, 848, 100, 400, 500, 800 - 1993 & after, walk behinds.

335-741 742-0741942-0741

21 11/16 X 1

5/16 2-1/2 2-1/4 .134

21″ cut, mulching blade, 1995 and newer, fi ts bowtie center holes (4 point star)

360-105 see above 21 11/16X 1

5/16 2-1/2 3 .149

Fits 21” walk behinds. Shark Tooth Mulching blade. Fits bowtie centre hole. (4 point star). For 1995 and newer.

325-863 01005338 1005338

21 3/4 none none 3 .204

02005019 / 94204415(3) for a 60” cut, High Lift Blade. Fits Cub Cadet M60 Tank, Recon 60, Tank 60, Tank M and Tank S.

335-450 742-0641942-0641

21 15/16 X11/16

5/16 2-1/2 2-1/4 .134

Fits 21″ walk behinds. High lift balde for MTD deck 1997 and newer. Fits bowtie centre hole. (4 point star)

335-432 742-0674942-0674

21-1/16 6 pointstar (5/8)

5/16 2-1/2 2-1/4 .164

742-0674-637 / 942-0674-637(2) for 42” cut, with star center hole, low lift blade. Fits 42” cut Cub Cadet / MTD 700 series mowers.

335-617 742-04308 742-04312

21-3/16 6 pointstar (5/8)

5/16 2-1/2 2-3/4 .149

742-0656 / 942-0656942-04308 / 942-04312

(2) for 42″ cut, High Lift blade, star center hole. Fits Cub Cadet model: RZT42, 2011 and newer.

335-621 742-04308 742-04312

21-3/16 6 pointstar (5/8)

5/16 2-1/2 2-1/4 .187

942-04308 / 942-04312

(2) for 42″ cut, Heavy Duty blade, star center hole. Fits Cub Cadet model: RZT42, 2011 and newer.


08-22


B B

335-551 742-04126 942-04126

21-3/16 6 pointstar (5/8)


(2) for 42” cut, star center hole, 3 in 1 mulching blade, deep deck - 1997 & after; autodrive 1999 & after

325-512 742-04126942-04126

21-3/16 6 pointstar (5/8)


(2) for 42” cut decks. Heavy Duty blade. Fits Cub Cadet / MTD model LT1042, 42” cut decks.



(2) for 42” cut. Shark Tooth Mulching blade.

325-888 742-04087 942-04087

21-3/16 6 pointstar (5/8)

none none 3 .164

(2) for 42″ cut, High lift blade. Fits model: RZT-17 with 42″ deck.

325-860 759-3853547191R1

21-1/4 3/8 17/32 4-1/2 2-1/2 .204

(3) for 60″ cut, for Low Boy #3260 and C3 Danco 60″ cut

325-876 742-3018759-3824942-3018

21-1/4 3/4 5/16 2-1/2 3 .203

(2) for 42″ cut garden tractor models 2000 and 1440.

325-858 742-3033742-04101

21-1/4 3/4 5/16 2-1/2 2-3/4 .187

759-04081 / 759-3830 / 942-04101 / 942-3033(2) for 42″ cut. Mulching blade / 3 in 1 blade. Fits Cub Cadet deck series 1500 and 1517; model: LT1042

325-795 759-3843759-3850

22-1/4 3/4 none none 2-1/2 .204

490473-R1 / 477597-R3(1) 325-795 and (2) 325-787 for 42″ cut, for models 1968 thru 1973. Also replaces 759-3843 and 759-3850.

335-470 742-04290 942-04290

23-1/4 6 point star (5/8)

none none 3 .149

942-04244 / A(2) for 46” cut deck on Cub Cadet / MTD series 100, LTX lawn tractors with 46” cut decks, 2009 and after. Models: LTX1045, LTX1046, LTX1046VT and LTX1146.

335-468 742-04290942-04290

23-1/4 6 pointstar (5/8)


(2) for 46” cut deck. Heavy Duty blade.For Cub Cadet / MTD series 100, LTX lawn tractors with 46” cut decks, 2009 and after. HEAVY DUTY BLADE.Fits CUB CADET models: LTX1045, LTX1046, LTX1046VT and LTX1146.

335-467 942-04244942-04244A

23-1/4 6 pointstar (5/8)


(2) for 46” cut deck. Super High Lift blade. For Cub Cadet / MTD series 100, LTX lawn tractors with 46” cut decks, 2009 and after. CUB CADET models: LTX1045, LTX1046, LTX1046VT and LTX1146.

360-107 see above 23-1/4 6 point star (5/8)

none none 3 .149



08-23


B B

315-242 30227-4263227-H

14-1/2 5/8 none none 2-1/2 .203

(3) for 42″ cut



350-199 30227-5030227-50V

17 5/8 none none 2 .204

(3) for 50″ cut (While Quantities Last)

315-165 30227-5030227-50V

17 5/8 none none 2-1/2 .203

(3) for 50″ cut.

315-442 30227-50H30227H

17 5/8 none none 2-1/2 .204

(3) for 50” cut, new style with rolled air lift on ZTR models.

345-505 30227-50V 17 5/8 none none 2-1/2 .250

(3) for 50″ cut. High Lift and heavy duty blade



310-506 30227-60 30227-60V

20-1/2 5/8 none none 2-1/2 .250

(3) for 60″ cut. High Lift blade



315-833 30227-72N 24 5/8 none none 3 .250

(3) for 72″ cut, new style with rolled air lift on ZTR models. Heavy duty blade.

DIXON315-002 6092

1393914-3/8 11/16 none none 2 .187

539119854(3) for 42″ cut

315-044 86886092

14-1/2 11/16 none none 2 .187

(3) for 42” cut, High Lift blade. (NOTE: PRICED INDIVIDUALLY - SOLD ONLY IN MULTIPLES OF 3). While Qty. Last

DIXIE CHOPPER

08-24


B B

315-006 623613939

14-1/2 11/16 none none 2-1/2 .187

539119854(3) for 42″ cut. For ZTR models 428 and 429.

315-036 868813938

14-1/2 11/16 none none 2-1/2 .187

539119853 / 539126275

(3) for 42″ cut. High Lift blade. For ZTR models 428 and 429.


(3) for 42″ cut. Shark Tooth mulching blade.

360-516 522 03 74-01 16-1/4 5 pointstar



320-515 86899229

17 5/8 none none 2 .203

9258 / 9264 / 539126276 / 539129741(3) for 50″ cut, standard deck.

315-028 9265539126431

17 5/8 none none 2-1/2 .187

(3) for 50" cut, High Lift blade. For "ZTR" models 502 and 503 - newer style.



360-925 13952 539119867

17 11/16 none none 2-1/2 .203

539129580 / 6897 / 9403 / 9444

(3) for 50″ cut, Shark Tooth mulching blade. ** 45/64″ ** ID.

345-116 1352 539115245

18-1/2 3/4 13/32 2-9/16 2-1/2 .187

(1) 345-116 and (1) 345-117 (W.Q.L.) for 36” cut., Left hand side. (Use with deluxe grass catcher). RH side is W.Q.L. Fits Dixon ZTR model 361 with bagger. For Simplicity use either (2) 345-116 for 36” cut or (1) 345-116 and (1) 345-108 for 36” cut for bagger models. For SIMPLICITY 500, 600, 1300, 4000, 5000 series; requires 2 for 36” cut.

315-143 1324 1893

18-1/2 3/4 none none 2-1/2 .187

(2) for 36″ cut.

345-108 1324539115242

18-1/2 3/4 13/32 2-9/16 2 .187

(2) for 36″ cut. For ZTR model 361 only.

DIXON continued

08-25


B B

320-253 12441 13956

20-1/2 5/8 none none 2-1/2 .240

18931 / 539119871 / 539129747 / 539129775 / 9383(3) for 60″ cut, High Lift blade. Fits 200 and 300 series, model 8025. Heavy duty blade.



340-129 12339 24-1/2 5/8 none none 2-1/2 .203

(3) for 72″ cut, Model 8025. NOTE: For Heavy Duty version see our 345-434 under our WOODS heading

335-281 8278302406

30 7/8 none none 2-3/4 .187

30″ cut. Blade has (2) 5/16″ holes on 2-1/2″ centres at each end of blade, use with our 335-414 Air lift kit.

ECHO - SEE HOMELITE / JACOBSEN

ECONOMY / POWER KING305-171 60-4301 16-1/2 3/4 13/32 3-1/8 2-1/4 .187

(3) for 48″ cut, Left hand cut, model RM48K-1C, High lift blade.

ENCORE355-701 253027 4-1/4 17/32 none none 1 .117

Finger blades, fi ts Power Thatcher model 25T100 - (28) blades per set.

340-109 483024483035

16-1/2 5/8 none none 2-1/2 .203

(2) for 32″ cut, (3) for 48″ cut mid size mowers.

340-100 483024483035

16-1/2 5/8 none none 2-1/2 .240

(2) for 32” cut, (3) for 48” cut mid size mowers. Heavy Duty Blade - Standard Lift.



340-158 363291482306

18 5/8 none none 2-1/2 .203

(2) for 36″ cut, (3) for 52″ cut mid size mowers.



Please see our “Blade by Length” chart located at the end of our “Blade - O.E.M Replacement” section.****** Banta is on-line @ www.bantasaw.com ******

DIXON continued

08-26


B B

355-701 5030311-503031

4-1/4 17/32 none none 1 .117

Finger blades, fi ts Encore Power Thatcher model# 25T100 - 28 blades pre set.

355-187 5132641-513264

7 1/2 none none 2-1/2 .160

Sweeper blade, for 44″ Exmark ZTR. Used with our 355-185 and 355-186 blades. (While Qunatities Last)

355-015 103-2519 653102

15-1/4 5/8 none none 2-1/2 .204

1-653102(3) for 44″ cut, Mulching blade.

355-069 103-6400 15-1/4 15/16 none none 2-1/2 .204

(3) for 44″ cut, High lift blade

355-070 103-6390 15-1/4 15/16 none none 2-1/2 .204

(3) for 44″ cut, Mulching blade

360-850 116-6358116-6358S

15.4 .660 none none 2-1/4 .160

116-6358-03(2) for 30” cut, Shark Tooth mulching blade. Fits EXMARK model: ECKA30 (EXM-591-8414).

355-183 103-2527 1-403026

16-1/4 5/8 none none 2-1/2 .250

103-2507, 103-6518, 103-6583,103-6583S, 103-6738S, 132-3515, 1-403026, 1-403059,323515, 403026, 403059, 520843S

(3) for 48″ cut, Heavy duty blade or (2) for 32″ Turf Tracer, HP Metro and Viking

355-028 103-6581 103-2517

16-1/4 5/8 none none 2-1/2 .204

1-403086 / 1-403148 / 403-086 / 403-148(3) for 48″ cut, Mulching blade, Heavy duty blade.


(2) for 32” cut or (3) for 48” cut, Shark Tooth Mulching Blade.

355-031 103-6396103-8390

16-1/4 15/16 none none 2-1/2 .204

103-9614 / 103-6391 / 109-7588 / 103-6401 /103-6386(3) blades for 48” cut. Notched Air Foil Blade. High Lift Blade.

355-040 103-6391 103-6391S

16-1/4 15/16 none none 2-1/2 .204

(3) blades for a 48” cut. Mulching Blade. Fits EXMARK Lazer Z CT, Lazer Z HP, Next Lazer ASX, Next Lazer Z, Next Lazer Z AS, QUEST, TURF TRACER HP and VANTAGE.

360-001 103-6396103-6396S

16-1/4 15/16 none none 2-1/2 .204

116-5177 / 116-5177S(3) for 48” cut, Shark Tooth Mulching Blade

EXMARK

08-27


B B

355-033 103-8296 103-8370 103-8370-S

16-1/4 15/16 none none 3 .204

(3) blades for a 46″ cut. For Triton deck. Medium Lift blade. Will replace Exmark# 1165496S.

355-035 103-8251103-8251-S

16-1/4 15/16 none none 3 .204

(3) blades for 46″ cut. High Lift Blade. Will replace Exmark# 109-6460-S

345-210 110-6837110-6837-03

17-1/2 5/8 none none 2-1/4 .170

(3) for 50” cut, Heavy duty blade. High lift blade. For EXMARK Quest models.



355-036 103-9600103-9600-S

17-1/2 15/16 none none 3 .204

(3) blades for a 50″ cut. For Triton deck. Medium Lift blade.

355-045 103-9605103-9605-S

17-1/2 15/16 none none 3 .204

103-9601 / 103-9601S / 103-6461S(3) blades for 50″ cut. High Lift Blade. Will replace Exmark# 109-6461-S

355-020 1-603637 1-603844

18 1/2 none none 2-1/2 .203

603637 / 603844(3) for 52” cut, High lift blade. Fits model: FMD52.

355-016 1032508 633485

18 5/8 none none 2-1/2 .150

1-303146 /1-633485 / 303146(2) for 36″ cut. High Lift blade

345-553 3032831-303283

18 5/8 none none 2-1/2 .250

(2) for 36″ cut, (3) for 52″ cut, Heavy duty, High Lift blade.

355-218 633484 1-633484

18 5/8 none none 2-1/2 .204

103-2518 / 103-6582S / 103-6584S / 303495 / 130-3495

(2) for 36″ cut, (3) for 52″ cut, Mulching blade. Also fi ts older Scag and Bobcat mowers



EXMARK continued

08-28


B B

355-067 103-6387 103-6387S

18 15/16 none none 2-1/2 .204

103-6402 / 103-6402S(3) blades for 52” cut. High lift blades. Fits Exmark Lazer Z series #540,000 and higher.

355-041 103-6392103-6392-S

18 15/16 none none 2-1/2 .204

(3) for 52″ cut, Mulching blade, Fits Lazer Z for series #540,000 & higher; fi ts Viking, Metro 36″ & 52″ cut

360-003 103-6397 18 15/16 none none 2-1/2 .204

(3) for 52” cut, Shark Tooth Mulching Blade. NOTE: FOR HEAVY DUTY VERSION SEE OUR 360-008 > Next page

360-008 103-6397 18 15/16 none none 3 .250

(3) for 52” cut, Shark Tooth Mulching Blade, Heavy Duty blade. Fits EXMARK models: Lazer Z, 540,000 & higher.

345-400 115-4999 18-3/4 5/8 none none 2-1/4 .164

(3) for 54” cut. Mulching blade.

355-001 115-9650115-9650-03

18-3/4 5/8 none none 2-1/4 .164

(3) for 54” cut, Mulching blade. NOTE: To replace Exmark# 115-9650-03 you will require (3) blades

360-415 115-4999115-4999-03

18-3/4 5/8 none none 2-1/4 .164

115-9650-03(3) for 54” cut, Shark Tooth mulching blade.

355-032 103-9607103-9607-S

19-1/2 15/16 none none 3 .204


355-188 1-603283 603283

20-1/2 1/2 none none 2-1/2 .204

613-072 / 1-613072 / 103-3233S(3) for 60″ cut, Standard High lift for models Explorer, Explorer II, Turf Ranger and Turf Tracer.

310-506 633483103-2530

20-1/2 5/8 none none 2-1/2 .250

103-2530S(3) for 60″ cut ZTR, High Lift blade.

355-054 6131121-613112

20-1/2 5/8 none none 2-1/2 .204

103-0301-S(3) for 60″ cut, Mulching blade. Fits Lazer Z model

355-039 103-03011-613112

20-1/2 5/8 none none 3 .204

(3) for 60″ cut, Mulching blade. Fits models Lazer Z, Lazer XP, Turf Ranger and Turf Tracer.



EXMARK continued

08-29


B B

355-049 103-6383103-6383-S

20-1/2 15/16 none none 2-1/2 .240

(3) for 60″ cut, High lift blade. For Bahia mowers.

355-048 103-6403103-6403-S

20-1/2 15/16 none none 2-1/2 .240

(3) for 60″ cut, High lift blade, Heavy Duty Blade.

355-042 103-6393 103-6393-S

20-1/2 15/16 none none 3 .204

(3) for 60″ cut, Mulching blade, Fits Lazer Z serial #540,000 and higher.

360-002 103-6398103-6398-S

20-1/2 15/16 none none 2-1/2 .204

116-5174 / 116-5174S(3) for 60” cut, Shark Tooth Mulching Blade

355-034 103-8396 103-8396-S

20-3/4 15/16 none none 3 .204

103-9629 / 109-6463 / 109-6463-S / 109-9393-S / 116-5499-S(3) blades for a 60” cut. For Lazer Z Triton deck. Medium Lift blade.

355-046 103-8244 103-8244-S

20-3/4 15/16 none none 3 .204

103-9269-S / 109-6463-S(3) blades for 60” cut. High Lift Blade. Fits Exmark Lazer Z 60” Triton Deck. Will replace Exmark# 109-6463-S.

345-051 108-0954108-0954-S

20-7/8 7/16 3/8 2-7/16 2-1/4 .150

108-095403For 21” cut mower. Fits Most 21” recycler decks: does NOT fi t 20465, 20466, 20475, 20476, 20482, 20483, and 20487.

360-804 see above 20-7/8 7/16 3/8 2-7/16 2-1/4 .149

21″ cut, Shark Tooth mulching blade.

345-397 421-000 421-000-03

21 7/16 3/8 2-7/16 2-1/4 .134

107-4276-0321” cut. Fits EXMARK 21” rear bagger and TORO 21” rear bagger.

355-170 103-4209130-2860

22 .885 none none 2-3/4 .187

(1) 335-170 LEFT HAND blade (Black) plus (1) 355-171 RIGHT HAND blade (Red) for 42” cut.Fits Exmark NAVIGATOR bagging mowers and Toro 8000 series Direct Collect Zero turn rear bagging mowers.

355-171 103-4210130-2859

22 .885 none none 2-3/4 .187

(1) 335-171 RIGHT HAND blade (Red) plus (1) 355-170 LEFT HAND blade (Black) for 42” cut. Fits Exmark NAVIGATOR bagging mowers and Toro 8000 series Direct Collect Zero turn rear bagging mowers.

355-179 116-1037S 22-1/4 15/16 none none 2-1/2 .187

(2) blades for 44” cut. Fits Exmark Quest mowers.

EXMARK continued

08-30


B B

355-047 103-9618 109-6464

22-3/4 15/16 none none 3 .204

103-9618-S / 103-9630 / 109-6464-S

(3) blades for 66” cut. High Lift Blade. Will replace Exmark# 109-6464-S.

355-037 103-9619103-9619-S

22-3/4 15/16 none none 3 .204


355-043 164-3097 103-2521-S

24-7/16 5/8 none none 3 .203

103-2521

(3) for 72″ cut. Mulching blade. Fits Lazer Z model.

355-129 103-6404103-6404-S

24-1/2 15/16 none none 3 .204

(3) blades for 72” cut. Air Foil Lift Blade, High Lift Blade. Fits Lazer Z for series #540,000 and higher.

355-044 103-6394103-6394-S

24-1/2 15/16 none none 3 .204

(3) for 72″ cut. Mulching blade. Fits Lazer Z for serial #540,000 and higher

360-004 103-6399103-6399S

24-1/2 15/16 none none 2-1/2 .204

116-5171S


360-007 103-6399103-6399S116-5171S

24-1/2 15/16 none none 3 .250

(3) for 72” cut, Shark Tooth Mulching Blade, Heavy Duty blade. Fits EXMARK models: Lazer AS, Lazer Z AC, Lazer Z AS, Lazer Z LC, Lazer Z XP, Lazer Z XS, Next Lazer ASX, Next Lazer Z, Next Lazer Z AS and Front Runner Decks.

355-038 103-9625103-9625-S

24-3/4 15/16 none none 3 .204


355-176 103-4207130-2861

25 .885 none none 2-3/4 .187

(1) 335-176 LEFT HAND blade (Black) plus (1) 355-177 RIGHT HAND blade (Red) for 48” cut. Fits Exmark NAVIGATOR bagging mowers and Toro 8000 series Direct Collect Zero turn rear bagging mowers.

355-177 103-4208130-2862

25 .885 none none 2-3/4 .187

(1) 335-177 RIGHT HAND blade (Red) plus (1) 355-176 LEFT HAND blade (Black) for 48” cut. Fits Exmark NAVIGATOR bagging mowers and Toro 8000 series Direct Collect Zero turn rear bagging mowers.

EXMARK continued

08-31


B B

355-181 5138761-513876103-3290

26 1/2 none none 2-1/2 .204

(1) 355-181 and (1) 355-182 for 52″ cut. Left hand cut blade. Fits right hand side of Exmark Explorer model.

355-182 5138751-513875103-3289

26 1/2 none none 2-1/2 .204

(1) 355-182 (see note below) and (1) 355-181 for 52″ cut. Right hand cut blade. Fits left hand side of Exmark Explorer model. ***** NOTE: (SOLD AS A SET ONLY - YOU MUST ORDER (1) OF EACH). *****

ELECTROLUX - SEE HUSQVARNA / YAZOO / KEES (Also AYP)

FALLS - Sycamore / K-Mart315-515 352400

352642 / H08177920 3/8 none none 1-3/4 .150

For 20″ push mowers. (While qunatities last)

315-523 351920 20-7/8 3/8 3/8 X 1-1/2

3 1-3/4 .150

For 21″ push mowers. (While quantities last)

315-531 351730352652 / H080379

22 3/8 none none 1-3/4 .150

For 22″ push mowers. (While quantities last)

FERRIS - (also see SCAG heading)315-237 5061827 15 5/8 none none 2-1/2 .250

(3) for 44″ cut, Heavy duty blade. Fits Ferris Zero Turn model: IS 500Z.

355-183 1520843 16-1/4 5/8 none none 2-1/2 .250

(3) for 48″ cut, Heavy duty blade.


(2) for 32” cut or (3) for 48” cut, Shark Tooth Mulching Blade.

340-113 20843 20843S

16-1/2 5/8 none none 3 .204

(2) for 32″ cut, (3) for 48″ cut, High lift blade



315-235 1511227S 1521227

18 5/8 none none 2-1/2 .240

5021227 / A48185(2) for 36” cut, (3) for 52” cut, Heavy duty blade.


(2) for 36” cut or (3) for 52” cut, High Lift blade. Shark Tooth Mulching blade.

EXMARK continued

08-32


B B

310-078 15208421520842S

21 5/8 none none 2-1/2 .240

5020842 / 5020842S

(3) for 61″ cut, Heavy duty blade. Fits mid mount ZTR models - Commercial Pro mowers.



340-129 1521408 24-1/2 5/8 none none 2-1/2 .203

(3) for 72” cut, Model 8025.

360-995 4811248113481709

24-9/16 5/8 none none 3 .250


345-434 1521408 24-5/8 5/8 none none 2-1/2 .240

(3) for 72” cut, Model 8025.

310-060 224765022476

25 5/8 none none 2-1/2 .250

5102227 / 5102227S(3) for 74″ cut, Heavy duty blade

FORD / NEW HOLLAND (also see HOMELITE / JACOBSEN)330-518 162836 20-1/2 15/16 none none 2-1/4 .240

(3) for 60″ cut

GILSON - SEE LAWNBOY / GILSON GRASSHOPPER

320-545 1250 320231

15 1/2 none none 2 .203

(3) for 44″ cut or (1) 320-545 and (2) 320-546 for 48″ cut. Standard lift blade

320-330 320233 15 1/2 none none 2-1/2 .240

(1) 320-330 and (2) 320-323 for 48″ cut. Deck models 9548, 9548S, 9348 and 9348S. Heavy duty blade, Contour blade.

FERRIS continued - (also see SCAG heading)

08-33


B B

320-546 1650 320236

18 1/2 none none 2 .203

(3) for 52″ cut or (2) 320-546 and (1) 320-545 for 48″ cut.

320-323 320238 18 1/2 none none 2-1/2 .240

(2) 320-323 and (1) 320-330 for 48″ cut. Deck models 9548, 9548S, 9348 and 9348S. Heavy duty blade, Contour blade.

320-550 320239 18 1/2 none none 2-1/2 .240

(3) for 52” cut. High Lift Blade - Heavy Duty. Fits models: 3452, 6052, 6152, 9052, 9252, 9352, 9552, 9652 and 9852

320-547 1855 320242

21 1/2 none none 2-1/2 .250

(3) for 61” cut, Heavy duty blade, For ZTR mowers.

GRASSCRAFT390-170 GC1601 4-1/16 31/64 none none XXX .150

Same as our 390-039 but with metal edge inserts. Fits Grasscraft model: GC1601 and Allan model: SE1601, also used on Husqvarna and Stihl trimmers.

GRAVELY (also see ARIENS) 305-783 014668

03498413-15/16 5/8 none none 2 .204

03498451 / 08899800 / 14668 / 34984(3) for 40″ cut, Fits Pro 100 series.

305-786 2728001600500

13-15/16 5/8 none none 2-1/4 .149


360-911 02961600 14-1/2 5/8 none none 2-1/2 .203

(3) for 42” cut. Shark Tooth Mulching blade. Fits ARIENS / GRAVELY models: Zoom, ZT XL series.

355-015 00272900 15-1/4 5/8 none none 2-1/2 .204

(3) for 44″ cut, Mulching blade. Found on ARIENS, EXMARK and GRAVELY mowers.

305-784 04265400 14-7/8 5/8 none none 2-1/4 .187

(3) for 42” cut. Fits Ariens / Gravely models: ZT42 and Zoom 42. For Ariens Zoom series zero turn mowers with 42” deck. Found on model 915323 (000101) Zoom 42 etc. NOTE: Does NOT fi t Zoom XL or MaxZoom series zero turn mowers.

320-515 1123488616

17 5/8 none none 2 .204

011234 / 08861651 / 08899300(3) for 50” cut, standard deck, fi ts Gravely Pro 150, 200 and 300 series

GRASSHOPPER continued

08-34


B B

320-251 4699887792

17 5/8 none none 2-1/2 .240

8779251 / 046998 / 08779251 / 08899600 / 09082400(3) for 50″ cut, High Lift blade, Fit zero turn radius models Pro 200 and Pro 300 series and 34Z model #992056



320-204 052928 52928

17 5/8 none none 2-1/2 .240

8866851 / 08866851 / 08899200(3) for 50″ cut, Mulching blade for Pro 50 and Pro Master 50 models. H.D. Blade.

320-240 212850212850021285051

17 5/8 none none 2-1/2 .240

(3) for 50” cut, ZTR “Zero Turn” model. Heavy duty blade.

320-244 03746500 03971900

17-7/16 5/8 none none 2-1/4 .187

(3) for 50” cut. Fits Ariens / Gravely model: ZT50.

320-511 3888342124

17-11/16 5/8 none none 2 .240

042124 / 08899400 / 88166(2) for 36″ cut for mower model #38872, High lift blade.

320-512 529278866751886670

17-11/16 5/8 none none 2-1/2 .240

(2) for 36″ cut, Mulching blade for Pro 36 mower.

320-564 2512489046

20-1/2 5/8 none none 2 .240

8904651 / 025124 / 08904651 / 08899000(2) for 40” cut, (3) for 60” cut, Heavy duty blade for commercial mowers.

320-253 04699908898900

20-1/2 5/8 none none 2-1/2 .240

089796, 08979651, 09081200, 46999, 47687, 89796(3) for 60” cut, High Lift blade. Heavy duty blade.



320-254 52929886690

20-1/2 5/8 none none 2-1/2 .240

(3) for 60″ cut, Mulching blade for Pro 40 and Pro Master 300 series mowers.

320-239 488648781851

20-1/2 5/8 none none 2-1/2 .240

(3) for 60″ cut, Mulching blade. Fits 60″ mower with fabricated deck. Heavy duty blade.

GRAVELY continued (also see ARIENS)

08-35


B B

320-523 20034751200347

20-1/2 1 none none 2-1/4 .250

9212P2 / 009212 / 20034700(2) for 40″ cut, Commercial deck. Heavy duty blade.

305-730 01137000137051

20-9/16 3/8 none none 2-3/4 .140

0118240021″ cut, Fits 911000 series - Zone start walk behinds.


21” cut, Shark Tooth Mulching Blade. (While Quantities Last)

320-517 00360200 22-1/2 5/8 none none 2-1/2 .250

(3) for 66” cut, Shark Tooth Mulching Blade. Fits Gravely Pro Master 260M, 266H, Pro Turn 266, 266H, 466 and 272 XDZ. (NOTE: Replaces are discontinued Shark Tooth blade # 360-931)

305-494 04159600 23-3/4 1 none none 2-1/2 .203

24” cut, Fits GRAVELY PRO walk behinds.

320-519 47685047685

24-1/2 5/8 none none 2-1/2 .240

08898800 / 89838 / 08983851 / 8983851(3) for 72″ cut, Heavy duty blade.

360-995 092547000929050009290600

24-9/16 5/8 none none 3 .250


GRAZER320-274 900-5528

900-581418 3/8 none none 2-1/2 .187

C37930 / C38042

(3) for 52″ cut, High lift blade.

GREAT DANE340-109 D18086 16-1/2 5/8 none none 2-1/2 .204

(2) for 32” cut, (3) for 48” cut mid size mowers

310-052 D18037 18 5/8 1/4 1-5/8 2-1/2 .250

(2) for 36” cut, (3) for 54” cut, and Great Dane (3) for 52” cut, Heavy duty blade

340-626 D18036C-39949

21 5/8 none none 2-1/2 .204

(3) for 61” cut. (For Heavy duty blade see part# 310-078 under Bobcat).

GRAVELY continued (also see ARIENS)

08-36


B B

315-762 330721500904

14-7/8 7/16 1/2 1-5/8 2 .150

(3) for 42″ cut, Set# 500904.

355-183 390666 16-1/4 5/8 none none 2-1/2 .250

(3) for 48″ cut, Crew Chief and Crew King - Heavy duty blade. Also replaces WM132061 and WMTA32061


(2) for 32” cut or (3) for 48” cut, Shark Tooth Mulching Blade

310-052 363055390665

18 5/8 1/4 1-5/8 2-1/2 .250

(2) for 36” cut, (3) for 54” cut, and Great Dane (3) for 52” cut, Heavy duty blade; W36 series.



330-345 501290 19 7/16 15-32 1-5/8 2 .155

(While Quantities Last)

330-118 392564Echo# 700992766

21 3/8 15/32 1-5/8 2 .164

Fits older 21” cut Homelite / Jacobsen walk behind mowers. (While Quantities Last)

330-001 554591390664

21 3/8 3/8 2 2-1/2 .187

21″ cut. (While Quantities Last)

330-019 390162 501395

21 7/16 15/32 1-5/8 2 .160

JA390162 / Echo# 700390162

21″ cut, push and self propelled mowers with rear discharge. (While Quantities Last)

330-133 4124087 22-5/16 1/2 none none 2-1/2 .250

(5) 330-133 for 90” cut, (7) for 124” cut. Low lift blade.Fits JACOBSEN Commercial mower models: AR-5, AR-522 and AR-722T.

330-331 4137186 22-5/16 1/2 none none 2-1/2 .250

(5) 330-331 for 90” cut, (7) for 124” cut, High lift blade, Heavy Duty blade.Fits JACOBSEN Commercial mower models: AR-5, AR-522 and AR-722T.

330-364 JT391040 23 1/2″ 3/8 2-7/8 2-1/2 .250

(3) 330-364 and (4) 330-363 per deck, Right hand cut blade, fi ts HR511 model.

330-363 JT391039 23 1/2″ 3/8 2-7/8 2-1/2 .250

(4) 330-363 and (3) 330-364 per deck, Left hand cut blade, fi ts HR511 model.

HOMELITE / JACOBSEN (FORD / NEW HOLLAND)

08-37


B B

330-134 390515 25 7/16 3/8″ 2-7/8 2-1/2 .250

(3) for 72″ cut, Commercial Turfcat.

HONDA325-031 72513-758-N00

code# 338928514-9/16 .630 none none 2-3/4 .187

(3) for 42″ cut, for model 4213.

325-003 72511-VA9-010 16-1/2 1.09 .24 X .33 1.96 2-1/4 .095

Outside holes are rectangular.

325-005 72511-VA5-700 18-3/16 .831 .416 3.45 2-1/4 .150

325-007 72511-VA5-840 18-7/16 .836 .564 3.469 3-3/8 .150

325-047 72511-VA5-J0072511-VA5-000

18-1/2 .831 .416 3-1/2 2-1/4 .150

code# 3451820 / 1454081

19″ walk behind, fi ts models HR-194 and HR-195.

325-009 425-AA96004 18-5/8 .831 .416 3.45 2-1/4 .150

325-050 72513-750-305code# 2685113

19-7/16 .825 .413 3-15/32 2-1/4 .160

High Lift blade (narrow). Left side fi ts models 3810 K1 and 3813 SA.

325-058 72512-750-305code# 2685105

19-7/16 .825 .413 3-15/32 2-3/4 .160

High Lift blade (wide). Right side fi ts models 3810 K1 and 3813 SA.

325-076 72511-758-L0072511-771-L00code# 3249737

19-7/16 .630 none none 2-3/4 .187

Takes (1) 325-076 & (1) 325-068 for 38″ cut. High lift blade. Fits 38″ deck models 3013, 4013, 4514 & 4518. (Right Hand Blade - 42mm Lift).

325-068 72531-758-L0072531-771-L00code# 3389301

19-1/2 .630 none none 2-3/4 .187

Takes (1) 325-068 and (1) 325-076 for 38″ cut. Fits 38″ deck models 3013, 4013, 4514 and 4518. (Left Hand Blade - 30mm Lift)

325-011 72511-VB3-B51 20-5/8 .831 .416 3.455 2-1/4 .150

325-056 72531-VK6-010code# 7869555code# 8504896

20-3/4 1-1/4 9/16 3-1/2 2-3/4 .134

Fits 21″ Honda mower. Upper or Top blade on models: HXA and HRC216K2. (For lower blade see 325-055)

325-060 72511-VB3-E41 20.674 .844 .563 3.469 2-1/4 .160

HOMELITE / JACOBSEN cont. (FORD / NEW HOLLAND)

08-38


B B

325-001 72511-960-004 72511-VA2-690

20-7/8 .845 .415 3-7/16 2-1/4 .150

72511-960-020 / 72511-VA4-000 / M210057691938 / 72511-960-000 / Code# 2801595

21″ cut, walk behind mowers. Fits models HR214, HRA214 and HRA216, also 21KS, 21S, A21 and S21.

330-410 72511-VA4-641code# 3504230

20-7/8 .845 .415 3-7/16 2-1/4 .160

21″ cut, Mulching blade. Fits all Honda 21″ cut from 1981 thru 1991.

325-013 72511-VE1-651 72511-VE1-E50 72511-VE1-652

20-29/32 .780 .535 3.600 4-1/8 .095

Fits 1988 thru 1994. Models: HRB535, 536, HRD535, 536, HRG536C, HRH536.

325-057 08750-960-333 20-7/8 .845 .415 3-7/16 2-1/4 .160

Off set blade. Fits 21″ cut models.

325-032 72511-VH7-000 21 .804 .415 3.378 4-1/4 .110

Fits 21” walk behinds, Lower blade on model HRX17. (2010 and newer).

325-021 72511-VE2-000 08720-VE2-000

21 .830 13/32 3-15/32 2-1/4 .095

72511-VG4-K00 / Code# 4010609

21” walk behinds. Lower blade for use with our 325-023 “upper blade”. Fits Honda Harmony and Harmony II; HRM215, HRB215, HRS216 and HRT216.

325-023 72531-VE2-00072531-VE2-010

21 1-17/64 13/32 3-15/32 2-5/8 .095

72531-VE2-020 / 08720-VE2-000 Code# 4513529 / 5342886 / 6672372

21” walk behinds. Upper blade for use with our 325-021 “lower blade”. Fits Honda Harmony and Harmony II; HRM215, HRB215, HRS216 and HRT216.

325-019 72511-952-000 72511-952-830

21 .845 .415 3-7/16 2-1/4 .149

Code# 0724500 / 2936573

21″ cut. Fits all Honda 21″ cut walk behinds from 1981 thru 1991. Blade has a sharpened air lift. (While Quantities Last)

325-017 72511-VE1-001 72511-VE1-010 72511-VE1-020

21 .869 .415 3-15/32 2-1/4 .134

72511-VG4-K00 / Code# 4513511 / 5142302 / 6672414 / 8294373

Fits 21″ walk behinds. High lift blade for models: Harmony, Harmony II, HRB215, HRM215, HRS216 and HRT216.

325-055 72511-VK6-000Code# 7869381

21-1/4 .804(20mm)

.408(10mm)

3-1/2 3-1/8 .117

Fits 21” Honda mower. Lower or Bottom blade on models: HXA and HRC216K2. (For upper blade see 325-056)

325-053 72511-763-A0072511-772-L00

29-9/16 .630 .480 4-5/16 2-3/4 .187

Fits 30″ Rider models H3011 and HTR3009-K1. High lift blade.

HONDA continued

08-39


B B

325-027 72513-751-02072511-952-830

29-3/4 1.02 .480 4-5/16 2-3/4 .160

code# 2160372 / 2936573Fits 30″ mid engine Rider model HTR 3009.

HUSQVARNA / YAZOO / KEES - also see AYP 340-309 506 66 87-01

506 67 65-01531 00 50-11

11-31/32 .395 .330 2-3/8 2 .164

(3) for 34″ cut, Husqvarna model 850-12.

360-009 see above 11-31/32 .395 .330 2-3/8 2-1/2 .203


340-310 506 75 15-01531 00 50-10

13-3/4 .403 .331 2-3/8 2 .164

(3) for 38″ cut. Husqvarna model 970-12

340-311 505 54 45-01 14-1/8 .403 .331 1.60 2″ .164

(3) for 42″ cut. Mulching blade. Fits Husqvarna R16C and R16C riders.

340-314 505 54 46-01 14-1/8 .472 none none 2.36 .160

(3) for 42” cut. Mulching blade. Fits Husqvarna riders.

340-002 539 11 20-78AYP# 112078

14-5/8 5 point star


(3) for 42″ cut. Fits EZ series; models: 4216 and 4217 and YTH2242 / YTH2242TDF (96041017300), Product No 960 43 01-18 mower decks.




340-058 539 10 32-74 14-7/8 5/8 none none 2-1/2 .204

(3) for 42″ cut. Fits Husqvarna, Yazoo and Kees, commercial mowers.

340-312 504 18 82-01544 10 30-01

15-5/16 .403 .331 1.60 2″ .164

(3) for 44″ cut. Mulching blade. Fits Husqvarna rider model 175 AWD with Combi 103 mower deck.

340-315 504 19 04-01 15-5/16 .472 none none 2.36 .160


340-034 532 10 66-35 532 02 50-34

15-3/8 3/8 none none 2-1/4 .187

532 12 22-65(3) for 44” cut, Same as Sears# 25034; Husqvarna models GT160 and YT161H.

HONDA continued

08-40


B B

340-489 506 96 63-01531 00 75-85

16-3/16 .950 .322 2-3/8 2 .150

340-003 539 11 34-25575 29 64-01

16-1/4 5 point star


(3) for 48” cut. Fits DIXON RAM 48ZT, SPEEDZTR 48. Fits EZ 4220, EZ 4624, EZ 4819, EZ 4822, EZ 4824, EZ 5224, EZ 5225, EZ 5226, EZC 4824, GTH 26, GTH 27, YTH 24 and YTH 2648.

360-516 522 03 74-01 16-1/4 5 pointstar



340-500 539 10 03-40539 11 84-20

16-1/4 5/8 none none 2-1/2 204

(3) for 48″ cut. Fits Husqvarna, Yazoo and Kees, commercial mowers.

340-313 504 18 81-01544 10 28-01

16-1/2 .403 .331 1.60 2 .164

504 18 81-01 / 544 10 28-01(3) for 48″ cut. Mulching blade. Fits Husqvarna riders 15V2 AWD, 15V2S AWD, 15TS AWD with Combi 112 mower decks.

340-316 544 10 27-01 16-1/2 .472 none none 2.36 .160


340-053 532 18 00-54532 17 39-20

16-5/8 5 pointstar


(3) for 48” cut, High lift blade, Heavy duty blade

340-077 532 17 39-21 16-5/8 5 pointstar






340-317 522 44 95-03 17 .472 none none 2.36 .134

(3) for ___” cut. Mulching blade. Fits Husqvarna riders.

340-172 506 88 52-01 531 00 50-09

17-1/4 .405 none noen 2.345 .204

(2) for 36″ cut. Fits Husqvarna riders.

340-125 532 12 17-98532 12 78-41

17-3/8 3/8 none none 2-1/4 .187

(3) for 50” cut, front engine Lawn Tractors; Husqvarna model GT180.

HUSQVARNA / YAZOO / KEES continued - also see AYP

08-41


B B

340-380 532 13 73-80 17-3/8 5 point star


(3) for 50″ cut

340-381 532 13 73-80 17-3/8 5 point star






340-060 574 87 08-01 17-3/4 5 point star


(3) for 52″ cut. Fits Husqvarna model: GTH26V52LS (96043011800) Product No: 960 43 01-18 mower decks.

340-318 535 42 94-01 17-7/8 .500 none none 2.36 .204


340-004 539 11 20-79 18 5 point star


(3) for 52″ cut. Fits EZ series; model: 5221

330-647 100341101485

18 5/8 none none 2-1/2 .203

532 10 03-41 / 539 10 03-41 / 539 10 14-85 / 539 10 57-12(3) for 52″ cut, High lift blade. For commercial walk behind mowers. For H.D. version see our 315-235

340-800 6448400532 64 48-400

18 .394 .331 2.56 3 .095

340-487 531 21 10-17 18 .680 none none 2.25 .125

(__) for ____” cut. Mulching blade. Fits Husqvarna riders.

340-153 532 12 78-41532 13 84-96

18-3/16 5 pointstar


(2) for 36″ cut,

340-154 532 12 78-41532 13 13-21532 13 74-15

18-3/16 5 pointstar


532 13 84-96(2) for 36″ cut, Heavy duty blade





08-42


B B

340-016 532 12 02-62532 12 63-38

18-3/16 3/8 none none 2-1/4 .187

(2) for 36″ cut, High lift blade

340-182 532 18 72-55917 532 18 72-55

18-1/4 5 point star


(3) blades for a 54″ cut. Mulching Blade. Fits AYP / Husqvarna, Poulan Pro and Craftsman.

340-180 532 18 72-54 18-1/2 5 pointstar

none none 3 .187

(3) for 54″ cut, Standard lift blade, fi ts Craftsman, Husqvarna & Poulan Pro mowers. (Shark Tooth order# 360-502 - AYP listing)

340-146 532 18 72-54532 18 72-56

18-1/2 5 point star


539 11 20-53575 93 84-01 / 777 18 72-56 / 917 18 72-54 / 917 532 18 72-54917 532 18 72-56 / 917 539 11 20-53 / 917 777 18 72-56.

(3) blades for a 54” cut. High Lift Blade - Heavy Duty. Fits Husqvarna, Poulan Pro and Craftsman. NOTE: (For Std. Lift blade see our 340-180 or Shark tooth see our 360-502).



(3) blades for a 54” cut. Shark Tooth Mulching Blade.

340-802 6445800532 64 45-800

18-45/64 .400 .337 2.560 2-1/2 .134

340-488 506 96 97-01 18-15/16 .950 .332 2-3/8 2 .150

340-007 574 48 11-01 19 5/8 none none 3 .240

(3) blades for 54” cut. Low-Lift blade. Fits Husqvarna PZ series, Zero Turn Riders.

340-001 575 26 59-01 19 5/8 none none 2-1/2 .240

(3) blades for 54” cut. Hi-Lift blade. Fits Husqvarna PZ series, Zero Turn Riders.

340-047 532 42 79-84 19 5 point star


Left Hand Side Blade. Fits 38” Center rear discharge models CTH2038, CTH2238, CT 151 / 131.

340-048 532 42 79-85 19 5 point star


Right Hand Side Blade. Fits 38” Center rear discharge models CTH2038, CTH2238, CT 151 / 131. (Left Hand Cut).

340-319 539 00 24-78 544 17 57-01

19-1/8 .488 .342 none 2.36 .240

544 17 57-10 / 586 19 88-10(__) for ____” cut. Mulching blade. Fits Husqvarna riders.


08-43


B B

340-022 532 12 12-63532 14 39-78

19-5/16 3/8 none none 2-1/4 .187

(2) for 38″ cut, High lift blade.


(2) for 38″ cut, Shark Tooth Mulcher. (While Quantities Last)

340-162 532 12 78-42532 13 84-97

19-5/16 5 pointstar


(2) for 38″ cut.

340-164 532 13 84-97532 13 13-22

19-5/16 5 pointstar



340-079 532 13 41-48532 13 97-44

19-5/16 5 pointstar



340-081 532 19 39-57 19-5/16 5 point star


(2) for 38” cut, Mulching Blade. Heavy duty. Fits Sears Craftsman riders. 3 in 1 blade. Heavy duty version of our 340-079.




340-012 532 85 09-72 19-15/16 5/8 3/8 1-7/8 2-1/2 .149

For 20″ cut, walk behind mowers.

360-903 see above 19-15/16 5/8 3/8 1-7/8 2-1/2 .149

For 20” walk behind mowers. Shark Tooth Mulching Blade (While Quantities Last).

340-044 532 11 48-84532 14 51-06

20 5/8 3/8 1-7/8 2 .134

532 75 22-33Mulching blade for 20” walk behind mowers

340-051 532 12 92-77532 13 33-46

20 5/8 3/8 1-7/8 2-1/4 .134

532 14 51-06 / 532 75 16-46Mulching blade for 20″ walk behind mowers. (Used on Craftsman mowers)

340-254 531 30 07-65532 16 58-33

21 5/8 3/8 1-7/8 2-1/4 .134

532 17 61-35 / 532 18 90-28 / 917 17 61-35 /917 532 16 58-33 / 917 532 17 61-35

Mulching blade for 21″ cut, walk behind mowers.


08-44


B B

340-020 101733 532 10 17-33

21 5/8 none none 2-1/2 .203

539 10 17-33(2) for 42” cut or (3) for 61” cut, Replaces our# 340-059.

310-078 42180BWM142180B

21 5/8 none none 2-1/2 .240


340-254 531 30 07-65532 16 58-33

21 5/8 3/8 1-7/8 2-1/4 .134

532 17 61-35 / 532 18 90-28 / 917 17 61-35 /917 532 16 58-33 / 917 532 17 61-35

Mulching blade for 21″ cut, walk behind mowers.

340-065 539 11 33-12 21 5 point star


(3) for 61″ cut. Fits MZ series; models 6124 & 6125

360-515 521 98 16-01 21 5 pointstar


(3) for 61” cut, Shark Tooth Mulching Blade.Fits Husqvarna Zero Turn models: MZ 61 / M-ZT 61 / P-ZT 61 series; models: 6124 and 6125.

340-178 532 12 78-43532 13 84-98

21 5 pointstar


532 13 89-71(2) for 42″ cut,

340-177 532 12 78-43 532 13 84-98

21 5 point star


532 13 89-71(2) for 42″ cut, Heavy duty blade with notch.

340-179 532 12 78-43532 13 84-98

21 5 pointstar


532 13 89-71


340-066 532 13 41-49532 42 27-19

21 5 pointstar


531 00 50-85, 539 11 04-60, 777 13 41-49,917532422719, 917539110460, 917777134149

(2) for 42” cut, Mulching blade, fi ts Sears model 917.270722.

340-069 532 13 97-75917139775P917532139775

21 5 pointstar


(2) for 42″ cut, * HEAVY DUTY * Mulching blade.


none none 3 .164

(2) for 42” cut, Shark Tooth Mulching Blade. (For standard blade see our 340-178).

360-500 see above 21 5 pointstar


(2) for 42″ cut, Shark Tooth mulching blade


08-45


B B

340-057 532 17 50-64532 18 04-59

21-1/8 5/8 3/8 1-7/8 2-3/4 .134

539 11 18-78, 917 17 50-64 PB, 917532175064 , 917532180459Mulching blade. Fits 21″ cut walk behind mowers with Honda engines.

340-008 532 40 67-13532 85 09-73

21-3/4 5/8 3/8 1-7/8 2-1/2 .149

91733219, 917532406713, 917532850973, 91756401,917701213, 917701213MS, 917850973, 917850973MS.

For 22″ walk behind mowers.

340-256 532 75 22-34 21-3/4 5/8 3/8 1-7/8 2 .134

Fits 22″ mulching mowers. Sears model 917.373680 (Use with our 405-752 and 405-753 blade adapters).

340-236 532 40 67-13532 14 11-14

21-3/4 5/8 3/8 1-7/8 2-1/4 .134

22″ cut, walk behind, Mulcher Fits models HW706D, HW906D, HWRBSP22525A, HWT450A, HWT450B, J455SDC and J555RDEB. (Use with our 405-752 and 405-753 blade adapters).

300-513 532 94 58-66532 95 68-66

21-3/4 5/8 3/8 1-7/8 2-1/2 .149

For 22″ Sears mulching mowers. (Use with our 405-191 blade adapter, also can be used with the newer 405-752 and 405-753 blade adapters).

360-511 see above 21-3/4 5/8 3/8 1-7/8 3 .149

For AYP / Husqvarna 22” walk behind mowers. Shark Tooth Mulching blade.

340-376 532 42 04-63532 42 18-25

22 5 ptstar


For AYP / Husqvarna 22” walk behind mowers with star center hole.

340-023 532 42 04-63532 42 18-25

22 5 ptstar


For AYP / Husqvarna 22” walk behind mowers with star center hole.

360-512 580 24 40-01580 24 40-02

22 5 point star


Fits Husqvarna 22” Walk-behinds. Models: HU550F, HU550FH, HU675FE, HU700F, HU700L. Commercial mulching blade.

340-322 544 17 58-01 22-3/16 .489 .342 none 2.36 .240

(3) for 61” cut. Mulching blade. Fits Husqvarna Commercial ZTR riders, models BZ27, BZ27D and BZ34 with 61” deck.

340-006 532 40 53-80777 40 53-80

23 5 point star


High Lift / Mulching Blade (2) for 46″ cut; fi ts models: PB19546LT, YTH2146XP, YTH2546, YTH2246LS, 2346XLS and Poulan model 19546LT.

340-010 532 40 31-07 532 40 53-80

23 5 point star


(2) for 46″ cut. Heavy Duty blade for our 340-006. Fits 2007 and newer AYP / Husqvarna / Poulan Pro lawn mowers. Models: YTH2546, YTH2146XP, 2246LS, 2346XLS, Poulan model: 19546LT.



(2) for 46″ cut; Shark Tooth mulching blade.


08-46


B B

HUSQVARNA / YAZOO / KEES continued - also see AYP310-060 25 5/8 none none 2-1/2 .250


340-014 539 10 55-71574 86 09-02

25 5/8 none none 2-1/2 .203

(3) for 72” cut. Mulching blade. Fits Husqvarna models: PZ29FXBF, PZ34FXBF, PZ5426FX, PZ6029FX, PZ6029PFX, PZ6030CV, PZ6034FX, PZ6034FXZT, PZ7234FX.

340-005 532 41 92-74777 41 92-74

29-5/8 5 point star


917 77419274(1) for 30″ cut. Mulching blade. Fits 30″ model PXT12530 / 960460008; also fi tsHusqvarna models: SRD17530, YTH23V42, CTH126, CT126, 455 Rancher, & Other Lawn Mowers.

360-514 532 41 92-74777 41 92-74

29-5/8 5 pointstar

none none 3 .149

917 774 41 92-74(1) for 30” cut. Shark Tooth Mulching.Fits 30” cut models: LT2213C, LT2213CA, LZ11577, LZ1577HRB, LZ1577RB, PO12530LT, PXT12530 and 960460008.

INGERSOLL - see CASE INTERNATIONAL HARVESTER - see CUB CADET JACOBSEN - see HOMELITE / JACOBSENHUSTLER / EXCEL - see www.bantasaw.com

JOHN DEERE 330-258 M41237

AM3069814 11/16 none none 2 .203

AM100991 / AM100991 / AM137326 / AM141041 / AM30698(3) for a 38″, 39″ and 41″ cut. Fits John Deere models: 100 and 112 series with 38″ decks; 110, 223, 300, 209, 210, 212, 214 and 216 with 39″ decks; 120, 140, 300, 312, 314, 316 and 317 with 41″ deck.

330-382 M115759 14-1/16 11/16 none none 2-1/2 .204

(3) for 38″ cut, shallow deck

330-260 M121589 15-13/16 13/16 none none 2-1/2 .164

(3) for 44” cut. Standard blade for 44M mower decks.Found on JOHN DEERE models: LX172, GX255, GX325, GX335, GX345 and GX355 with the 44M decks.

360-495 M119798M119799

15-13/16 13/16 none none 3 .164

M121589(3) for 44” cut, Shark Tooth Mulching Blade. Fits John Deere 44” Piranha Mower Deck. Upper Mulching Blade.

330-448 M127466 16 .680 none none 2-1/2 .203

(3) for 46″ cut lawn tractors. Used on Scotts mowers; Scotts lawn tractors S2046 and 2546 (1999 thru 2001) models

360-492 see above 16 .680 none none 2-1/2 .203

(3) for 46″ cut, Shark Tooth Mulching Blade.

08-47


B B

330-266 M41967AM31100

16 23/32(.705)

none none 2 .203

(3) for 46″ cut, Model 300 series. Deck model 46″, 47″ and 48″.

360-496 see above 16 23/32(.705)


(3) for 46”, 47” and 48” cut, Shark Tooth Mulching.

330-696 AM104489 16-1/2 5/8 none none 2-1/2 .203

(3) for 48″ cut, High lift blade. Fits old style commercial walk behinds with ″V″ style deck.



330-447 M135589 16-5/8 3/4 none none 2-1/2 .203

(3) for 48” cut yard tractors, High lift blade for bagging. Fits John Deere lawn and garden tractors; also used on Scotts model S2048 yard tractor.

330-371 M76466 16-5/8 13/16 none none 2-1/2 .203

(3) for 48″ cut

330-383 M113517 16-5/8 13/16 none none 2-1/2 .204

(3) for 48” cut, Mulching blade. Fits John Deere Z-trak F620 (Tri-cycler). (For Shark Tooth version use our 360-432)

330-373 M115495 16-5/8 13/16 none none 2-1/2 .204

(3) for 48” cut, new style. Fits JOHN DEERE models: GS25, GS45 and GS75 commercial walk behinds; GT242-GT275, LX172-LX188, 240-445 series; and Z-trak F620 front mounts with 48” decks;


(3) for 48″ cut, Shark Tooth mulching blade. High lift.

330-408 GX20250GX20819GY20568

17 11/16 13/32 3-11/16 2-1/2 .164

(3) for 48″ cut, fi ts L120 and L130 series tractors (sold by Home Depot) (For John Deere GY20568; requires (3) 330-408 for a set)

330-314 GX20434 17 11/16 13/32 3-11/16 2-1/2 .164

(3) for 48″ cut, High Lift blade, Fits L120 and L130 series tractors

360-475 see above 17 11/16 13/32 3-11/16 2-1/2 .187


JOHN DEERE continued

08-48


B B

330-300 M127500M127673

17 13/16(.800)


M145476(3) for 48″ cut, Fits many John Deere LX, GT and GX series. Models: 325, 335, 345, GT225, 235, GX255, 325, 335, 345, 355, LT166, 170, 180, 190, LX225, 277, 279, 280, X320, X324, X340, X400 and X500; also found on model Z445.

360-454 see above 17 13/16(.800)



360-476 see above 17 13/16(.800)

none none 3 .250

(3) for 48″ cut, Shark Tooth Mulching Blade, Heavy Duty blade.Fits John Deere 48C convertible deck on models: X320 and X324 since 1999; also found on model Z445.

330-410 AM141035 AM137757

17 7 point star


GY20852 / GX21784 / GX21786(3) for 48” cut, Mulching blade - Standard. Fits John Deere models: D140, D150, D160, LA130, LA140, LA145,LA150, LA160, LA165, X140, X165, 145, 155C and Z225 riders. (John Deere Blade Set# GY20852 = (3) of 330-410).

330-321 GX21785 17 7 point star


(3) for 48” cut, Mulching blade - High Lift. Recommended for use when a John Deere bagger has been installed. Fits John Deere models: D140, D150, D160, LA130, LA140, LA145, LA150, LA160, LA165, X140, X165, 145, 155C and Z225.




330-379 M136185M136194

17-1/16 7/8 none none 2-1/2or 3

.240

TCU14939(3) for 48” cut. Fits JOHN DEERE F620, F680 and F687 Z-Trak; Z510A Estate Z-Trak; Z710, Z810A, Z820A, Z910A and Z920A Z-Trak Pro Series mowers, 7-Iron deck. (For shark tooth mulcher see our 360-470).

360-470 see above 17-1/16 7/8 none none 2-1/2or 3

.250


330-308 M86209AM39966

17-3/16 11/16 none none 2-1/2 .204

(3) for 50″ cut. (old# 3383), 285 model series & 300 series

360-430 M76461AM106634

17-3/16 11/16 none none 3 .250

(3) for 50” cut. Shark Tooth Mulching Blade. Fits JOHN DEERE 285 model series and 300 series.

310-110 TCU34280 18 5/8 none none 2-1/2 .203

(2) for 36” cut, (3) for 52” cut. High lift blade, Used on Quicktrac models: 652R, and 652B.


08-49


B B

330-647 PT8721AM104490

18 5/8 none none 2-1/2 .203

(2) for 36″ cut, (3) for 52″ cut, High lift blade. For commercial walk behind mowers.

340-158 TCU29188TCU37208

18 5/8 none none 2-1/2 .203

(2) for 36″ cut, (3) for 52″ cut mid size mowers. High Lift blade



330-412 GX21380 18-5/8 7 pointstar


(3) for a 54″ cut. Fits John Deere models: D170, G110, 190C and LA150 series. (Will also replace John Deere Blade Set#’s GY20679, GY20684 and GY20686 = (3) 330-412). (For Shark Tooth version see our 360-447).



(3) for 54″ cut, Shark Tooth Mulching Blade (3 in 1 blade)

330-384 M113518 18-5/8 13/16 none none 2-1/2 .204

(3) for 54″ cut. Mulching blade. Tricycle blade. Fits Sabre, Scotts lawn and garden tractors S2554 (1999 thru 2001) and GT2554 (2002) series with 54″ deck, front mount mowers and Z-trak F620 with 54″ mowers.

330-381 M135590M76467

18-5/8 13/16 none none 2-1/2 .203

(3) for 54″ cut, High lift performance blade, fi ts commercial, lawn and garden tractors; front mount mowers and Z track.

330-365 M114582M115329

18-5/8 13/16 none none 2-1/2 .204

M115496

(3) for 54″ cut. New Style. Fits GS25, GS45 and GS75 commercial walk behinds; 325 thru 455 series lawn and garden tractors; Z-Trak F620; 4100 compact utility tractors. Can be ordered to replace John Deere blade set# GY20569. Used on Scotts mowers that were made by John Deere. (For Shark tooth mulcher see our 360-406).



330-278 M122455 18-11/16 1 X 1-1/8


(2) for 36″ cut, Fits mid sized commercial mower; timed deck; models GS25 and GS36.


08-50


B B

330-354 M143520 M145516

18-7/8 13/16 none none 2-3/4 .250

M144516 / M152726 / MIU11251(3) for 54″ cut. Fits John Deere models: GT225 - GT245, GX255, GX325 - GX355, LX266, LX280, LX288, Z445, X340, X465 - X495, X500, X520, X534, X540, X575 - X595, X700 with 54″ convertible deck. (Medium Lift Blade)


(3) for 54” cut. Shark Tooth Mulching Blade. Fits John Deere models: GT225 - GT245, GX255, GX325 - GX355, LX266, LX280, LX288, Z445, X340, X465 - X495, X500, X520, X534, X540, X575 - X595, X700 with 54” convertible deck. (For a regular blade see 330-354 or our 360-402).



330-480 M135334 M136195

19 7/8 none none 2-1/2 .250

TCU30316(3) for 54″ cut, Heavy duty blade. Fits the 7-iron deck.



330-304 TCU30317 M144652

19 7/8 none none 3 .250

(3) for 54” cut. High Lift Blade. Fits JOHN DEERE 737, 757, Z710A, Z520A, Z810A, Z820A, Z830A,Z840A, Z910A, Z920A and Z925A.

360-400 see above 19 7/8 none none 3 .250

(3) for 54″ cut Z Track, Shark Tooth mulching blade.

330-418 AM141040M154158

19-1/2 7 pointstar


(2) for 38″ cut, Mulching blade. Fits John Deere Tricycler with 38″ deck. (While Quantities Last)

330-413 M153118M154159

19-1/2 7 pointstar

none none 3 .203

(2) for 38” cut, High Lift blade. (Set# AM137324). Note: Order (2) of our 330-413 to make a set.Fits John Deere model X300 with 38” - standard deck.



(2) for 38″ cut. Shark Tooth mulching blade. (While Quantities Last)


none none 3 .203

(2) for 38″ cut, Shark Tooth mulching blade. (While Quantities Last).


none none 3 .250

(2) for 38″ cut. Shark Tooth mulching blade, Heavy Duty blade.


08-51


B B

330-290 M82408AM100946

19-1/2 11/16 none none 2-1/2 .204

(2) for 38″ cut, regular lift blade.

330-292 M84472M153118

19-1/2 11/16 none none 3 .204

(2) for 38″ cut, Medium lift blade. Fits models: X300, SX38, STX38 and LT133, LT150, LT160, LT180 and LT190.NOTE: Will replace John Deere blade kit# AM141039 if (2) blades are ordered.

330-316 M83459AM100991

19-1/2 11/16 none none 3 .204

M154159(2) for 38″ cut, Super high lift blade, fi ts models SX38, STX38, LX255 and GX355

330-403 M112991M154158

19-1/2 11/16 none none 2-1/2 .204

AM141040(2) for 38″ cut. Mulching blade.

360-290 AM104652M112974

19-1/2 11/16 none none 3 .203

M74449 / AM137325(2) for 38″ cut, Shark Tooth mulching blade.

330-282 M48452M112847

20-1/2 25/32(.770)

none none 2 .203

AM35557(3) for 60″ cut, model 400 and Toro/Wheel Horse model WH-D 250.

330-357 M141785 M87622

20-1/2 29/32(.906)


AM100538(3) for 60” cut, Heavy duty blade. Fits JOHN DEERE models: 160, 2210, 261, 318, 400, 4010, 4100, 4110, 4115, 420, 4200, 4210, 430, 4300, 4310, 4400, 4410, 4500, 4510, 4600, 4610, 4700, 4710, 655, 755, 802, 855, 955; also F910-F935 and F1145 series front mounts.

360-401 see above 20-1/2 29/32(.906)

none none 3 .250


335-234 GX22250 20-3/4 3/8 none none 2-1/2 .149

21” Mulching blade / Wave 21” push mower. Fits John Deere model: JS35.

330-845 PT7132PT14764

20-7/8 5/8 1/2 2-5/8 3 .125

Fits most 21″ walk behind mower without BBC, new style, will replace 330-779 minus stiff ening plate. Tri-cut design.

330-348 M112738M112972

20-7/8 7/8 3/8 3-11/16 2-3/4 .134

M115453 / M125413Fits John Deere 21″ cut. Mulching blade. Fits models: Silver, 12SB, 12PB, 14PB, 14SE, 14SB, JA60 and JA62. Tri-cycler walk behind mower model 145Z.

360-300 see above 20-7/8 7/8 3/8 3-11/16 2-3/4 .149

21″ cut, Shark Tooth mulching blade. (While Quantities Last)


08-52


B B

360-920 TCU35394 21 5/8 none none 2-1/2 .250

(3) for 61” cut, Heavy duty blade. Shark Tooth mulching blade.

330-479 M128485 M133381

21 29/32(.906)


TCU15881 / M144196

(3) for 60” cut. Heavy duty blade. Fits JOHN DEERE 7 Iron decks, 1400, 1500, 2520, 495, 4100, 4200, 4400, 4500, 4600, 4700, 595, 600L, M665, Z-Trac (520, 667, 757, 797, 720, 820, 830, 840, 850, 860, 915.

360-078 see above 21 29/32(.906)


(3) for 60” cut. Shark Tooth Mulching Blade, Heavy duty blade.

360-451 see above 21 29/32(.906)

none none 3 .250

(3) for 60″ cut, 7-Iron deck. Shark Tooth mulching blade.

330-458 GC00344 GC00175

21 3/8 .480 2 2-3/4 .125

21” cut Mulching blade. Fits JOHN DEERE JS60, JS60H, JS61, JS63, JS63C and JS63E 21” steel deck walk behind mowers.

330-411 M154061AM137327

21-3/8 7 point star


AM141032

(2) blades for 42″ cut, (standard lift). Fits John Deere models: X300 with 42″ - standard deck, also fi ts models: X304 with wheel steer, and X320 with 42″ cut Edge deck. (John Deere AM137327 = Blade Kit - (Order Qty: 2) of our 330-441 = Kit#).

330-414 GX22151GY20850

21-3/8 7 pointstar


AM137333

(2) for 42” cut. Mulching blade. Fits John Deere models: D100, D110, D120, D130, LA100, LA105, LA100, LA110, LA115, LA120, LA125, LA135, X110, X120, X225, Z225, also found on 102, 115, 125 and 135 riders. (To replace John Deere Blade kit# GY20850 - order 2 blades). (For Shark Tooth mulcher version see our 360-445).

360-450 AM137328AM137333

21-3/8 7 point star

none none 3 .203

AM141032 / AM141033 / GX22151 / GY20850 / M154061M154062

(2) for 42” cut, Shark Tooth Mulching Blade. Fits John Deere model X300 with 42” - standard deck. (Blade kit# AM137328 - requires 2 blades). ALSO fi ts John Deere models: 102, 115, 125 and 135 riders, also models: LA100, LA105, LA110, LA115, LA120, LA135, X110, X120 and X225.

330-446 M148613M139976

21-3/8 13/16 none none 2-1/2 .203

M139977 / M135881 / M159049

(2) for 42” cut or (3) for 60” cut, new style decks introduced in 1999. Fits John Deere models: GT225, GT235, GT245, GX325, GX335, GX345, GX355, LX225, LX255, LX266, LX277, LX279, LX280 and LX288. Will also replace John Deere#’s M139972 (HL), M139975 (Mulching), M159046 (Mulching) and M159047 (HL).


08-53


B B

330-386 M148613 21-3/8 13/16 none none 2-3/4 .187

(2) for 42″ cut, 42C Deck (Note: Similar to our 330-446 but a 1/4″ wider @ 2-3/4 vs 2-1/2″).NOTE: Will also replace John Deere#’s M159046 (Mulching) and M159047 (HL).

360-407 M135881 M139975

21-3/8 13/16 none none 2-1/2 .203

M139976 / M139977, M159046, M159047

(2) for 42″ cut or (3) for 60″ cut, Shark Tooth Mulching Blade.

360-403 M148613M159049

21-3/8 13/16 none none 2-3/4 .187

(2) for 42″ cut. Shark Tooth mulching blade. (While Quantities Last).

330-339 GX20249 GY20567

21-3/8 11/16 13/32 3-11/16 2-1/2 .164

(2) for 42” cut. Fits John Deere models: L100, L108, L110, L111 and L118 with 42” deck; also found on Sabre models: 14.542GS.

360-404 GX20433 21-3/8 11/16 13/32 3-45/64 2-1/2 .187


330-449 M139802M145969

21-15/32 11/16 none none 2-1/2 .160

M127129

(2) for 42” cut, Mulching blade. Fits JOHN DEERE models: LT150, LT160, LT180 and LT190 with 42C deck (Medium Lift Blade). Fits SABRE 1742GS and 1742HS lawn tractors.



330-415 M149421 21-1/2 7 pointstar


(1) 330-415 and (1) 330-416 for 42” cut. Left Hand cut blade. Fits model: X304 with 42” Mulch Deck. (NOTE: PRICED INDIVIDUALLY - SOLD ONLY IN SETS). (While Quantities Last)

330-416 M149422M145968

21-1/2 7 pointstar


M137330(1) 330-416 and (1) 330-415 for 42″ cut. Right Hand Blade. Fits model: X304 with 42″ Mulch Deck. ALSO (2) 330-416 blades for 42″ cut found on model: LT160 with convertible deck.


08-54


B B

330-309 M143504 21-5/8 13/16 none none 2-1/2 .250

(3) for 62” cut. Standard blade for 62C convertible deck. Fits models: 2320, 2520 & some 3000 / 4000 series Compact Tractors; X465, X475, X485, X495, X575, X585, X595, X700, X720, X724, X728, X729, X740, X744, X748, X749 lawn tractors with 62” decks.

330-310 M152727 21-5/8 13/16 none none 3 .250

(3) for 62” cut. High Lift blade.Fits John Deere models: 2305, 2000 / 3000 / 4000 series Compact Utility Tractors, X465, X475, X485,X495, X575, X585, X595, X700, X720, X724, X728, X729, X740, X744, X748, X749 lawn tractors with 62” decks.

360-408 Will replaceM145719

21-5/8 13/16 none none 3 .250

(3) for 62″ cut, Shark Tooth Mulching Blade. (Professional installation recommended, slight length modifi cation may be required).

360-435 M144935TCU51118

21-7/8 7/8 none none 3 .250

Shark Tooth Mulching Blade.Fits JOHN DEERE models: 1420, 1435, 1445, 1545, 1565, 1600 Sidewing, 1620 Sidewing, 1600 Turbo Sidewing & 1600.

330-688 M83363AM102401

24-15/16 29/32(.906)


(3) for 72″ cut, (9/16″ Lift), Heavy duty blade.

330-255 M80783 M141786 AM102402

24-15/16 29/32(.906)


AM38314 / M119975(3) for 72” cut, (1” Lift), Heavy duty blade. Will fi t on models: F911, F925, F930, F932, F935, F1145, 755, 855, 955 Compact Utility Tractors; 670, 770, 790 Compact Utility Tractors; 4200, 4300, 4400, 4500, 4600, 4700 Compact Utility Tractors; 4115, 4210, 4310, 4410, 4510, 4610, 4710 Compact Utility Tractors.

360-436 EPC201693M141669M142514

24-15/16 29/32(.906)

none none 2-1/2or 3

.250

TCU15882(3) for 72”, 7 iron. Fits Zero Turn models: 1420, 1435, 3120, 3320, 3520, 3720, 4120, 4320, 4520, 4720.

360-497 TCU27401TCU27876

27 13/16 none none 3 .250

(1) 27” blade per deck. (3) blades total required for 68 inch thru 74” cut.Shark Tooth Mulching Blade. Fits JOHN DEERE 7400 Terraincut Commerical Rotary mowers.

330-399 AM36407AM101538M89454

29-1/2 11/16 none none 2-1/2 .204

For 30″ deck mowers, Standard lift blade with formed centre for washer.

330-329 M118958 29-1/2 11/16 none none 2-1/2 .204

For 30″ deck mowers, Mulching blade. Formed centre for washer. (While Quantities Last)

KEES (Snapper) - see SNAPPER


08-55


B B

330-425 70080-00234 11-3/4 3/4 none none 2-1/2 .187

(2) 330-425 and (1) 330-426 for 44″ cut. Fits belly mount models B48A - tractor models 6100 and 7100. (While Quantities Last)Note: 330-426 is No Longer Available.

330-555 70000-00604 70712-34330

15-5/16 11/16 11/32(.338)

1-1/2 2 .204

70000-25003(3) for 44″ cut, fi ts model RC44-G.

330-434 K5576-34350K5576-97530

16-1/2 29/32 none none 2.50 250

K5184-97532(3) for 48” cut. High Lift Blade. Fits Kubota ZG222, ZD221 ProDeck, RCK48P-222Z. Right hand. Requires 3 blades.

330-563 70000-25044 70721-34330

16-5/8 11/16 11/32(.338)

1-1/2 2 .204

76500-70721(3) for 48″ cut, fi ts model MR4800.

330-435 76500-3433070000-25009

16-5/8 23/32(.718)

none none 2 .203

(3) for 48” cut. Fits models RC62, RC72 and RC82. Deck# RC48-62H, RC48-62A/F and RC48G.

330-495 K5182-71840 16-5/8 23/32(.718)

none none 2 .250

(3) for 48″ cut. Heavy Duty Blade. Fits Kubota models: RCK48-16B, RCK48-22BX, RCK48TG. (While Quantities Last).

330-497 K5182-71840K5575-34330

16-5/8 23/32(.718)


K5575-97530

(3) for 48″ cut. Heavy Duty Blade. Fits Kubota models: ZG2048, GR, ZG and ZD series.

330-520 K5583-34340K5583-97530

16-5/8 1-1/8 none none 2-1/2 .250

(3) for 48” cut. Heavy duty blade. High Lift blade.Fits KUBOTA Zero Turn Z700 series, model RCK48P-723Z mowers; also Z723 Zero Turn and Z724 Zero Turn mowers.

330-433 76505-34330 70000-25009

16-11/16 23/32(.718)

none none 2 .250

70000-34330

(3) for 48” cut. Heavy duty blade. High Lift blade. Fits Belly mower deck #RC48-820.

330-498 K5579-34350 16-11/16 23/32(.718)


(3) for 48” cut. Heavy duty blade. Standard Lift bladeFits Kubota models: 48-H28-TR. Fits 48” Zero turn RCK48-20ZG and ZG124E-48, and ZG123S-48.

08-56

KUBOTA continued


B B

330-428 70080-00450 16-3/4 5/8 none none 1-3/4 .203

(3) for 48” cut. (NOTE: PRICED INDIVIDUALLY - SOLD ONLY IN SETS). (While Quantities Last).

345-751 5081 16-3/4 5/8 none none 1-3/4 .203

(3) for 48″ cut. Left hand cut blade.

330-554 K5617-34330 18-5/8 23/32(.718)


(3) for 54” cut, Heavy duty blade. Standard blade.Fits model H30T, series 2G127, ZG23, ZG2354, GR2100, GR2110, BX-RCK54P models. K327.

360-984 K5231-92340 K5617-34330

18-5/8 23/32(.718)

none none 2-1/2or 3

.250

K5617-97530 / K5617-97590 / K5639-92300 / K5639-92332

(3) for 54″ cut. Shark Tooth mulching blade. Heavy Duty Blade. Fits models: ZG2354 with a 54” deck.

330-436 70000-0060570000-25004

18-5/8 1-1/8 none none 2-1/2 .250

76529-34330 / K5615-34330 / K5615-34340(3) for 54” cut, Heavy duty blade. High Lift blade.Fits RCK54-18Z, RCK54P-321Z, ZD18, ZD321, G1800, G1900 and G2000. Center mount mower.

360-986 see above 18-5/8 1-1/8 none none 3 .250

(3) for 54″ cut. Shark Tooth Mulching Blade.

330-442 K5351-34342 18-5/8 .890 none none 2-1/2 .250

(3) for 54” cut, Heavy duty blade, Standard blade. Fits model K424.

330-440 K5619-34350K5619-97530

18-5/8 .890 none none 2-1/2 .250

(3) for 54” cut, Heavy duty blade. High Lift blade. Fits model H30T, series ZG & ZD models. K446.

330-550 70000-00606 20-3/8 23/32(.718)


(3) for 60″ cut, T1400 (8″ long cutting edge). (While Quantities Last)

330-518 76540-3433070000-25008

20-1/2 15/16 none none 2-1/4

.240

(3) for 60″ cut, fi ts models RC60-20, RC60-F20 and RC60-25.

330-548 70722-3433070000-25006

20-7/16 11/16 none none 2 .204

(3) for 60″ cut, models MR6000, RCB60-1/E/AE, RC60-71H, RC60-72/A and RC60-27.

08-57

KUBOTA continued


B B

330-241 66071-61760 70000-25010

20-1/2” 11/16” none none 2-3/8 .203

(2) for 40” cut. Standard Lift blade. Fits tractor model: T1400.

330-534 K5112-71940 20-1/2 .715 none none 2-1/2 .250

(3) for 60” cut. Standard blade. Fits tractor models K132.

330-444 K5371-34340K5371-99040

20-1/2 .890 none none 2-1/2 .250

(3) for 60” cut. Medium Lift blade. Fits tractor models G2460 lawn tractors; BX sub compact tractors with 60” decks; K472.

330-552 K5649-34340 K5647-34342

20-1/2 1-1/8 none none 2-1/2 .250

70000-00602 / 70000-25001 / 76539-34330

(3) for 60” cut. Medium Lift blade. Fits tractor models B2150, B1750, B7100HSD, B1550, FZ2100, FZ2400, G1900 and G2000, with deck models RC60-21B, RC60-71B, 60B, 60F221 and 60GO; also found on RCK60-24B, RCK60-27B, RC60B-21 models.

330-553 K5647-97530 K5668-97530

20-1/2 1-1/8 none none 2-1/2 .250

K5668-34350 / K5647-34340

(3) for 60″ cut. High Lift Blade. Fits Kubota Diesel tractor models: ZD21F - 60P, ZD21, ZD25,ZD28, ZD323, ZD326, ZD327, ZD331, 21Z RCK60P, 28Z RCK60P, ZD28 RCK60P, 331Z RCK60P and F-36 etc.

360-987 see above 20-9/16 1-1/8 none none 2-1/2 .250


330-419 65621-3721270000-25025

20-11/16 3/4 9/16 3-17/32 2-1/4 .150

Fits 21″ cut, 5 Hp electric start self propelled walk behinds mowers. Model# W50021SCE. (Centre hole embossed)

330-427 K5677-34340 24-1/2 1-1/8 none none 2-1/2 .250

(3) for 72” cut, For Kubota Pro deck. Fits models: ZD28, ZD326 and ZD331. Heavy duty blade, High Lift blade. Note: Can replace Kubota# 70000-00563 if you insert a reduced bushing (1-1/8” OD to 15/16”) or you can see our 330-571 as another option.

330-571 70000-25002 70000-25013

24-1/2 15/16 none none 2-1/2 .250

70000-25030 / 76550-34330 / 76553-34330 / K5676-97520

(3) for 72″ cut. Fits tractor models L2850, L2550, F2100, F2100F and F2400 - with deck models RC72-78, RC72-F25, RC72-F20 and RC72-F24.

08-58

KUBOTA continued


B B

320-259 702855703380

14-1/2 1-1/8 25/64 3-1/4 2-1/2 .187

Gilson# 37059 / 11799

(3) 320-259 for 42” cut. (Also replaces Lawn Boy#’s 702855 / 703380).

320-101 707463Gilson# 241189

18-1/2 3/8 none none 2-1/2 .134

(2) for 36″ cut, Fits older front engine Rider models, also replace Gilson# 241189) (While Quantities Last)

320-333 705658Gilson# 210505 Gilson# 705658

19-1/2 1-1/8 25/64 3-1/4 2-1/2 .134

2) for 38” cut, High Lift blade. (Also replaces Lawn Boy# 705658). (NOTE: PRICED INDIVIDUALLY - SOLD ONLY IN MULTIPLES OF 2). (While Quantities Last).

320-341 705889Gilson# 213368 Gilson# 705889

19-1/2 1-1/8 25/64 3-1/4 2-1/2 .134

(2) for 38” cut, Low lift blade with slotted centre hole. (Also replaces Lawn Boy# 705889). (NOTE: PRICED INDIVIDUALLY - SOLD ONLY IN MULTIPLES OF 2). (While Quantities Last).

345-050 112-8841 112-8841-03

19-3/4 7/16 3/8 2-7/16 2-1/4 .129

Pushmower blade for 20” cut model. (fi ts 789963 with 20” decks). Found on Lawn-Boy 10640, 10640C, 10641, 10641C, 10642, 10642C, 10643C, 10644C, 10645, 10646, 10647 and 89963.

300-020 610041 20 3/8 3/8 slot 3/8 slot 2-1/4 .149

20″ cut, steel deck Cdn Tire Lawn Boy.

330-795 682485521725 682484

20 5/8 none none 2-1/2 .134

20″ for commercial mowers# 4502/8602 and higher (While Quantities Last)

330-845 612543683682

20-7/8 5/8 17/32 2-9/16 3 .134

611240 / 682915 / 608094 / 89844

Fits most 21″ walk behind mower without BBC, new style, will replace 330-779 minus stiff ening plate.

345-051 93-410693-4106-03

20-7/8 7/16 3/8 2-7/16 2-1/4 .150

108-0954-03 / 108-3762-03

21″ cut, for aluminum deck - walk behind mowers.

360-804 see above 20-7/8 7/16 3/8 2-7/16 2-1/4 .149

21” cut, Shark Tooth mulching blade.

330-779 603703 20-7/8 5/8 none none 2-1/2 .134

Fits 21″ walk behinds, old style, Used on models from 1961 thru 1980 with stiff ening plate.

08-59

LAWN BOY continued - also see GILSON


B B

320-358 707368705807

21-15/32 1-1/8 25/64 3-1/4 2-1/2 .134

Gilson# 212773 / 705807(2) for 42” cut, ols style, blade has a slotted centre hole. (Also replaces Lawn Boy#’s 705807 / 707368). (NOTE: PRICED INDIVIDUALLY - SOLD ONLY IN MULTIPLES OF 2). (While Quantities Last).

345-322 104-8697-03108-9764-03

21-3/4 7/16 none none 2-1/4 .150

Fits newer 22″ Lawn Boy push mowers equipped with Honda engines.


Fits on newer 22” cut push mowers. Shark Tooth mulching blade

LESCO340-109 21871

02187116-1/2 5/8 none none 2-1/2 .203

(2) for 32” cut, (3) for 48” cut mid size mowers

340-100 21871021871

16-1/2 5/8 none none 2-1/2 .240

(2) for 32” cut, (3) for 48” cut mid size mowers. Heavy Duty Blade - Standard Lift.

340-113 05011150111

16-1/2 5/8 none none 3 .204

(2) for 32 cut, (3) for 48” cut, High lift blade

360-917 021871 21871

16-1/2 5/8 none none 2-1/2 .204


340-158 05012550125

18 5/8 none none 2-1/2 .203

(2) for 36″ cut, (3) for 52″ cut

360-918 see above50140050140

18 5/8 none none 2-1/2 .204


340-174 05015650156

20 5/8 none none 2-1/2 .203

(2) for 40″ cut, (3) for 60″ cut

340-626 50256 51532

21 5/8 none none 2-1/2 .203

050170 / 50170(3) for 61” cut. (For Heavy duty blade see part# 310-078 under Bobcat).

360-921 05017050170

21 5/8 none none 2-1/2 .204


MAGIC CIRCLE - SEE DIXIE CHOPPER

08-60

LAWN BOY continued - also see GILSON

Download - Banta BLADES - O.E.M. REPLACEMENT · Banta BLADES - O.E.M. REPLACEMENT Part# OEM# Length Centre Hole Outer Hole Centre/ Centre Width Thick B B 345-082 1656143 1656143SM 16-11/16 3/4

Top Related