Download - 571 · 572 · 573 · 574 - Eclipse Lighting Inc · 574 Shown with PEND Option • DRIVER — Universal volt (120-277v) electronic driver with standard 0-10V low voltage dimming. Optional

TM© 2020 Eclipse Lighting Inc.

Eclipse Lighting pg.1 Rev. 3/9/2020

9245 W. Ivanhoe St. I Schiller Park, IL 60176 P: 847-260-0333 I F:847-260-0344 I E: [email protected] I W: eclipselightinginc.com

CATALOG # TYPE

PROJECT/LOCATION

APPROVED BY

We reserve the right to revise the design or components of any product without notice.

571 · 572 · 573 · 574Vandal Resistant Linear Fixture LED

Instructions for Joining Units for Tandem Option

7/8" Dia. Knockout--(5)

49"

23-7/8"

3/8" Dia. Hole--(6)

9"

21-3/4" 21-3/4"

1"

3" 9"

4"

7/8 " Dia. Knockout--(5)

36"

3"

3/8 " Dia. Hole--(6)

9" 9"

4"


25"

3"

3/8 " Dia. Hole--(6)

9" 9"

4"

572 SERIES

573 SERIES

574 SERIES23-7/8"

LOCKNUT EACH SIDE

SEALING WASHERAS REQUIRED CONDUIT STUB

CONNECTOR

Shown with Protective Shield (PSH)

DIMENSIONS


49"

23-7/8"

3/8" Dia. Hole--(6)

9"

21-3/4" 21-3/4"

1"

3" 9"

4"


36"

3"

3/8 " Dia. Hole--(6)

9" 9"

4"


25"

3"

3/8 " Dia. Hole--(6)

9" 9"

4"

572 SERIES

573 SERIES

574 SERIES23-7/8"


49"

23-7/8"

3/8" Dia. Hole--(6)

9"

21-3/4" 21-3/4"

1"

3" 9"

4"


36"

3"

3/8 " Dia. Hole--(6)

9" 9"

4"


25"

3"

3/8 " Dia. Hole--(6)

9" 9"

4"

572 SERIES

573 SERIES

574 SERIES23-7/8"

OPTIONS

ARRACompliant

43-7/8" Distance (On Center)

12" Stem

574 Shown with PEND Option

• DRIVER — Universal volt (120-277v) electronic driver with standard 0-10V low voltage dimming. Optional Step Dimming Driver, Programmable (PRG) mA Driver.

• EMERGENCY — Emergency Battery (EL).• HOUSING — Heavy gauge extruded aluminum with cast aluminum end caps. Includes knockouts

for surface conduit and tandem mounting. Optional back box for emergency battery backup operation available.

• REFLECTOR — Formed aluminum with multiple bends for maximum rigidity and unitized with all electrical components.

• FINISH — All metal parts are 5 stage pre-treated and finished in white polyester powder coat. Natatorium Coating (NAT) optional.

• LENS — .130” thick U.V. stabilized “Satinized” Polycarbonate Lens (SPL) is Standard with no LED Striations. Optional Clear Prismatic Polycarbonate Lens (CPR) is available.

• LENS FASTENERS — Recessed Allen set screws to secure lens in place (2) each side (4) total.• LIGHT ENGINE — Light Emitting Diode (LED). Optional protective coating (NAT).

• BLUETOOTH WIRELESS CONTROLS — TelleLight™(TL) System with PacWave (PW) Controls• COMPLIANCE — Built to comply with U.S. and Canadian Safety Standards. Complies with

Buy American Act. Suitable For Wet Location Covered Ceiling. Wall Mount — Damp Location (requires PSH option to maintain Wet Listing). PENDING

Shown with Back Box (BB)

5½”

Clear Prismatic Polycarbonate Lens (CPR)

SPECIFICATIONS




SIZE / LED WATTAGE ❶

Fixture 571 572 573 574Dimensions - W x H x D 13” x 9” x 4” 25½” x 9” x 4” 37” x 9” x 4” 49” x 9” x 4”

Light Emitting Diode LED20w / 30w 20w / 30w / 40w 20w / 40w

50w / 60w20w / 40w / 50w

60w / 80w / 100w

Delivered Efficacy: ±130 LPW

SERIES 571 = 571 Series 1 Ft 572 = 572 Series 2 Ft 573 = 573 Series 3 Ft 574 = 574 Series 4 Ft

SIZE (TANDEM MOUNT SERIES - 574 ONLY) 8’ = 8 Foot Tandem 12’ = 12 Foot Tandem CLT = Custom Length Tandem (Consult Factory)

LENS SPL = Satinized Polycarbonate Lens — STANDARD CPR = Clear Prismatic Polycarbonate Lens .156 = .156” UV Stabilized Satinized Polycarbonate Lens

LED WATTAGENote: Refer to Above Chart for Size / Wattage Compatibility LED(xx) = LED (xx = Wattage, ex: LED40)

LED COLOR TEMPERATURE (CCT) 3K = ±3000K range LED 35K = ±3500K range LED 4K = ±4000K range LED 5K = ±5000K range LED 65K = ±6500K range LED

VOLTAGE 120 = 120 Volts 277 = 277 Volts 347 = 347 Volts UNV = Universal Volt (120-277v) Electronic Driver 2UNV = Two Universal Volt (120-277v) Electronic Drivers NOTE: 0-10V Low Voltage LED Dimming Comes Standard for All Drivers except 347V.

FINISH BK = Black BZ = Bronze NAT = Natatorium Coating (Consult Factory) WH = White CC = Custom Color (Visit www.ralcolor.com)

MOUNTING OPTIONS PEND = Pendant Mounting Kit, 1/2” conduit entrance hole. (2) 12” Length Stems Included; Custom length as needed. 43-7/8” Distance (on center) between Stems. Damp Location. TDM = Tandem Mount (574 Only); Mounting Hardware Incl. Specify Length: 8’, 12’, or CLT (Consult Factory) WM = Wall Mount — Requires PSH

DIMMING OPTIONSNote: 0-10V 100%-30% is Standard D13 = LED Step Dimming

CONTROL OPTIONSNote: See Accessory Options for Required Remote Controller OCC = Occupancy Sensing | Motion Sensor Integral⓴ — Microwave / Single Feed / 120/277V Only — Standby Dim Level Presets: ON/OFF (0%/100%) BLD = Bi-Level Dimming | Motion Sensor Integral⓴ — Microwave / Single Feed / 120/277V Only — Standby Dim Level Presets: 10% / 20% / 30% (Standard) / 50% BLD/AMB = Bi-Level Dimming | Motion Sensor Integral⓴ — Ambient Light Sensing Feature — Microwave / Single Feed / 120/277V Only — Standby Dim Level Presets: 10% / 20% / 30% (Standard) / 50% — Bi-Level Control Initiated at Ambient Light Level Preset BLS = Bi-Level Switching - Using 2 Drivers (2UNV) TL = TelleLight Wireless System — See Page 4 for More Information (Consult Factory)

MISC OPTIONS BB = Back Box for Emergency Battery❷ — (1.5” Depth) FUS = Single Fusing DFUS = Double Fusing DLC = Design Lights Consortium - Compliant (PENDING) PSH = Protective Shield for Wall Mount — Required for Outdoor Wet Location SG = 10KA Surge Protection (ANSI spec C62.41.2) TP = Tamperproof Screws TS = Non-Shunted Tombstone Sockets — For Style-B T8 Lamps (By Others)

NOTES:❶ Consult Factory with requests regarding lamp sources, wattag-

es or voltages not shown.

❷ Backbox (BB) Required for Fixtures over 50W with Emergency Battery. Consult Factory for Specific Criteria.

❸ Consult Factory for additional Emergency Battery options.❹ 571 Series requires Remote Emergency Battery (REL).⓴ Max mounting height of fixture is 18’ (18 feet).

� Due to form and fit, final selection of the Battery Pack under discretion of Factory

EMERGENCY / BATTERY OPTIONS❸�No onsite Emergency Power (AC or DC) is providedNote❷: Integral Batteries require Back Box (BB)

GTD1 = Generator Transfer Device (Signify) GTD2 = Generator Transfer Device (LGTD) — Shunt Relay w/Fire Alarm Override Input

Meets California Energy Commission Title 20:(CEC-400-2014-009-CMF) Efficiency Standards EL8W = Integral LED 8 Watt EL16W = Integral LED 16 Watt EL20W = Integral LED 20 Watt

REL8W = Remote LED 8 Watt REL16W = Remote LED 16 Watt REL20W = Remote LED 20 Watt

Cold Weather Emergency Batteries:Operating Temp: -20°C thru 50°C NON-CEC Compliant EL10W-CW = Integral LED 10 Watt (Cold Weather)

REL10W-CW = Remote LED 10 Watt (Cold Weather)

Constant Power Emergency Batteries: (Constant Lumens) REL7W-CP = Remote LED 7 Watt (Constant Power) REL10W-CP = Remote LED 10 Watt (Constant Power) REL12W-CP = Remote LED 12 Watt (Constant Power)

ACCESSORY OPTIONS (order as a separate line) 9002 = Tamperproof Screwdriver REMT = Remote Controller for Sensor Options

ORDERING GUIDE:Series Size LED Wattage CCT Voltage Finish OptionsLens




Zonal Lumen Summary

Zone Lumens %Luminaire

0-30 1088 25.9

0-40 1779 42.4

0-60 3145 75.0

60-90 934.6 22.3

0-90 4080 97.2

90-180 116.3 2.8

0-180 4196 100.0

Summary of ResultsTotal Lumen Output 4372Efficacy (Lm/W) 113.9CRI 82.4CCT 4068KDuv 0.002

Cone of Light Tabulation

Mounting Height (Ft) Footcandles at Nadir Beam Width (Ft)

2.0 369.0 4.9 6.2

4.0 92.2 9.7 12.4

6.0 41.0 14.6 18.6

8.0 23.1 19.4 24.8

10.0 14.8 24.3 31.0

Chromaticity Coordinates

Chromaticity (x) 0.379Chromaticity (y) 0.382Chromaticity (u') 0.222Chromaticity (v') 0.503

X

Test: 102063649CH-007 | Catalogue #: 572-CPR-LED40-4K-EBU-BK | Test Date: 6/30/2015Temp Voltage Current Power Power Factor Current THD

25ºC (±1ºC) 120.0 322.6 38.40 0.992 9.28%

Spectral Data Over Visible Wavelengths

0.000

10.000

20.000

30.000

40.000

50.000

60.000

70.000

350 400 450 500 550 600 650 700 750 800

(mW

/nm

)

Nanometers

PHOTOMETRIC DATA

Test: 103842377CHI-002 | Catalogue #: 574-SPL-LED100-5K-EBU-WH | Test Date: 2/21/2019Lamp Output Lumen Efficacy Input Voltage Input Current Input Wattage Power Factor Delta UV (Duv) Color Temp CRI

12,791 Lumens 130.5 LPW 120.0V 818.6mA 98.02W 0.998 0.0006 5238K 83.8

0.000

50.000

100.000

150.000

200.000

250.000

300.000

350.000

350 400 450 500 550 600 650 700 750 800

(mW

/nm

)

Nanometers

Test: 103876548CHI-001 | Catalogue #: 574-CLR-LED100-5K-2EBU-GC-WH | Test Date: 3/22/2019Lamp Output Lumen Efficacy Input Voltage Input Current Input Wattage Power Factor Color Temp

11,727.2 Lumens 119.5 LPW 120.0V 825.4mA 98.17W 0.992 5000K




TelleLight™

SR-Series

TelleLight Devices

MODEL CODE DESCRIPTION FUNCTION HEIGHT MOUNTING IP RATING

TSS1 Microwave Sensor with BLE Occupancy + Dimming 8’ - 40’ Side IP65

TSS2 Microwave Sensor with BLE Occupancy + Dimming 8’ - 40’ Bottom IP65

TSS3 PIR BLE Sensor Occupancy + Dimming 8’ - 12’ Side IP65

TSS4 PIR BLE Sensor Occupancy + Dimming 8’ - 12’ Bottom IP65

TSS5 PIR BLE Sensor Occupancy + Dimming 13’ - 40’ Side IP65

TSS6 PIR BLE Sensor Occupancy + Dimming 13’ - 40’ Bottom IP65

TSS7 PIR BLE Sensor Occupancy + Dimming + Daylight Harvest 8’ Bottom *

TSS8 PIR BLE Sensor Occupancy + Dimming 8’ Bottom *

TSS9 Microwave Sensor with BLE Occupancy + Dimming 10’ Bottom IP65

(*) Consult Factory

TSC1 1-CH Fixture Controller - Internal BLE Controller + Dimming 12-24 VDC Input, 0-10VDC X2 OutputTSC2 2-CH Fixture Controller - Internal BLE Controller + Dimming + CCT Tuning 18-48 VDC Input, 0-10VDC X2 OutputTSC3 1-CH Fixture Controller - Internal BLE Controller + Dimming 12-24 VDC Input, 0-10VDC X1 Output*TSC4 1-CH Fixture Controller - External (IP65) BLE Controller + Dimming 12-24 VDC Input, 0-10VDC X1 Output*TSC5 1-CH Fixture Controller - External (IP65) BLE Controller + Dimming + Ambient Light 12-24 VDC Input, 0-10VDC X1 Output

*Requires use of a TE Connectivity Lumawise Receptacle - Model: 2213858-1

TSW1 BLE Dimming Wall Switch Manually Switching White, 120-277VAC Input, BLE OutputTSW2 BLE Dimming Wall Switch Switch + PIR Occupancy + Ambient Light White, 120-277VAC Input, BLE Output

TPP1 Power Pack 1-Required per ISS & ISC Device 100-277 VAC Input

Side Mount (TSS3/TSS5)PIR BLE Sensor

Bottom Mount (TSS4/TSS6)PIR BLE Sensor

Side Mount(TSS1)MicrowaveSensor BLE

Bottom Mount(TSS2)MicrowaveSensor BLE

(TSS7) / (TSS8)PIR Sensor BLE

TSW1BLE DimmingWall Switch

TSW2BLE DimmingWall Switch

Bottom Mount(TSS9)MicrowaveSensor BLE

TSC11-CH Fixture Controller



TSC41-CH Fixture CTRL

TSC51-CH Fixture CTRL

Download - 571 · 572 · 573 · 574 - Eclipse Lighting Inc · 574 Shown with PEND Option • DRIVER — Universal volt (120-277v) electronic driver with standard 0-10V low voltage dimming. Optional

Top Related