Transcript
Page 1: 34-62H — ADA  · PDF file34-62H — ADA Compliant Dimensions subject to change without notice. Contact Florestone Products to verify product specifications. ADA COMPLIANT*

40-4

0H

— A

DA

Com

plia

nt

Dimensions subject to change without notice.

Contact Florestone Products to verify

product specifications.

ADACOMPLIANT*

Dimensions may vary ± ¼" inch. Please check unit before installation.

For barrier-free installation, contractor shall provide ½" minimum recess for curb in sub floor.

ADA compliance when accessories installed by manufacturer.Note: Exterior floor drain for water run-off recommended.Symmons® is a Registered Trade Mark of Symmons Industries, Inc.Moen® is a Registered Trade Mark of Moen Corporation.

Architect’s Specifications

Furnish and install one-piece gel-coated fiberglass shower stall Model 40-40H designed for barrier-free use as manufactured by Florestone Products Company. Basic shower will conform to ANSI-Z-124.2. and the accessorized module to ANSI-A-117.1. Unit to include stainless steel curtain rod; Symmons® pressure balance mixing valve with concealed check stops; Moen®

hand-held shower head with hose and stainless steel slide bar/grab bar; stainless steel corner grab bar; stainless steel recessed soap dish; white naugahyde folding wheelchair transfer seat (specify right or left hand).

Supplied with 2" brass drain.

Shower curtain optional.

Curtain Size: 45" x 72".

Standard Color: White.

Special order colors available.

Florestone Model 40-40H Barrier-Free Shower

2851 Falcon Drive • Madera, CA 93637

T. 559.661.4171 • T. 800.446.8827

F. 559.661.2070 • florestone.com

40¼" x 40¼" x 80" Weight: 205 lbs.

18" above inside

33" to 36" above inside

⅞"

77"

80"

40¼"

20¼"1½"

1½"

19½"

40¼"36"

36"

1"

Standards:

I.A.P.M.O. File No. 0687ANSI-Z-124.2 & ANSI-A-117.1

Specify Right or Left Hand Seat

Page 2: 34-62H — ADA  · PDF file34-62H — ADA Compliant Dimensions subject to change without notice. Contact Florestone Products to verify product specifications. ADA COMPLIANT*

Dimensions subject to change without notice.

Contact Florestone Products to verify

product specifications.

ADACOMPLIANT*

Dimensions may vary ± ¼" inch. Please check unit before installation.

For barrier-free installation, contractor shall provide ½" minimum recess for curb in sub floor.

ADA compliance when accessories installed by manufacturer.Note: Exterior floor drain for water run-off recommended.Symmons® is a Registered Trade Mark of Symmons Industries, Inc.Moen® is a Registered Trade Mark of Moen Corporation.

Architect’s Specifications

Furnish and install three-piece gel-coated fiberglass shower stall Model 3PC-40-40H designed for barrier-free use as manufactured by Florestone Products Company. Basic shower will conform to ANSI-Z-124.2. and the accessorized module to ANSI-A-117.1. Unit to include stainless steel curtain rod; Symmons® pressure balance mixing valve with concealed check stops; Moen® hand-held shower head with hose and stainless steel slide bar/grab bar; stainless steel corner grab bar; stainless steel recessed soap dish; white naugahyde folding wheelchair transfer seat (specify right or left hand).

Supplied with 2" brass drain.

Shower curtain optional.

Curtain Size: 45" x 75".

Standard Color: White.

Special order colors available.

Florestone Model 3PC-40-40H Barrier-Free Shower

2851 Falcon Drive • Madera, CA 93637

T. 559.661.4171 • T. 800.446.8827

F. 559.661.2070 • florestone.com

3P

C-4

0-4

0H

— A

DA

Com

pli

an

t

18" above inside

33" to 36" above inside

⅞"

77"

78"

40¼"

20¼"1½"

1½"

19½"

40¼"36"

36"

1"

40¼" x 40¼" x 78" Weight: 215 lbs.

Standards:

I.A.P.M.O. File No. 0687ANSI-Z-124.2 & ANSI-A-117.1

Specify Right or Left Hand Seat

Page 3: 34-62H — ADA  · PDF file34-62H — ADA Compliant Dimensions subject to change without notice. Contact Florestone Products to verify product specifications. ADA COMPLIANT*

34-6

2H

— A

DA

Com

plia

nt

Dimensions subject to change without notice.

Contact Florestone Products to verify

product specifications.

ADACOMPLIANT*

Dimensions may vary ± ¼" inch. Please check unit before installation.

For barrier-free installation, contractor shall provide 5/8" minimum recess for curb in sub floor.

ADA compliance when accessories installed by manufacturer.Note: Exterior floor drain for water run-off recommended.Symmons® is a Registered Trade Mark of Symmons Industries, Inc.Moen® is a Registered Trade Mark of Moen Corporation.

Architect’s Specifications

Furnish and install one-piece gel-coated fiberglass shower stall Model 34-62H designed for barrier-free use as manufactured by Florestone Products Company. Basic shower will conform to ANSI-Z-124.2. and the accessorized module to ANSI-A-117.1. Unit to include stainless steel curtain rod; Symmons® pressure balance mixing valve with concealed check stops; Moen®

hand-held shower head with hose and stainless steel slide bar/grab bar; stainless steel wrap-around grab bar; stainless steel recessed soap dish.

Supplied with 2" brass drain.

Shower curtain optional.

Curtain Size: 72" x 78".

Standard Color: White.

Special order colors available.

Florestone Model 34-62H Barrier-Free Shower

2851 Falcon Drive • Madera, CA 93637

T. 559.661.4171 • T. 800.446.8827

F. 559.661.2070 • florestone.com

O.D. = 62" x 34" x 80" I.D. = 60" x 31½" x 79" Weight: 255 lbs.

33"to

36"*

⅞"

79"

32½"

31"

30"

60"62"

13½"34"

80"

ControlArea

" Nailing Flange

Standards:

I.A.P.M.O. File No. 0687ANSI-Z-124.2 & ANSI-A-117.1

Page 4: 34-62H — ADA  · PDF file34-62H — ADA Compliant Dimensions subject to change without notice. Contact Florestone Products to verify product specifications. ADA COMPLIANT*

Dimensions subject to change without notice.

Contact Florestone Products to verify

product specifications.

ADACOMPLIANT*

Dimensions may vary ± ¼" inch. Please check unit before installation.

For barrier-free installation, contractor shall provide 5/8" minimum recess for curb in sub floor.

ADA compliance when accessories installed by manufacturer.Note: Exterior floor drain for water run-off recommended.Symmons® is a Registered Trade Mark of Symmons Industries, Inc.Moen® is a Registered Trade Mark of Moen Corporation.

Architect’s Specifications

Florestone Model 3PC-34-62H Barrier-Free Shower

2851 Falcon Drive • Madera, CA 93637

T. 559.661.4171 • T. 800.446.8827

F. 559.661.2070 • florestone.com

3P

C-3

4-6

2H

— A

DA

Com

pli

an

t

Furnish and install three-piece gel-coated fiberglass shower stall Model 3PC-34-62H designed for barrier-free use as manufactured by Florestone Products Company. Basic shower will conform to ANSI-Z-124.2. and the accessorized module to ANSI-A-117.1. Unit to include stainless steel curtain rod; Symmons® pressure balance mixing valve with concealed check stops; Moen®

hand-held shower head with hose and stainless steel slide bar/grab bar; stainless steel wrap-around grab bar; stainless steel recessed soap dish.

Supplied with 2" brass drain.

Shower curtain optional.

Curtain Size: 72" x 78".

Standard Color: White.

Special order colors available.

O.D. = 62" x 34" x 80"I.D. = 60" x 31½" x 79" Weight: 255 lbs.

33"to

36"*

⅞"

79"

32½"

31"

30"

21"

60"62"

13½"34"

80"

ControlArea

" Nailing Flange

Standards:

I.A.P.M.O. File No. 0687ANSI-Z-124.2 & ANSI-A-117.1

Page 5: 34-62H — ADA  · PDF file34-62H — ADA Compliant Dimensions subject to change without notice. Contact Florestone Products to verify product specifications. ADA COMPLIANT*

35-6

2H

— A

DA

Com

plia

nt / C

A A

DA

Com

plia

nt

Dimensions subject to change without notice.

Contact Florestone Products to verify

product specifications.

ADACOMPLIANT*

CALIFORNIAADACOMPLIANT*

Note: Units sold in CA

DO NOT come with a slide bar.

Instead a stationary wall hook

will be installed per CA-ADA

requirements (2008).

Dimensions may vary ± ¼" inch. Please check unit before installation.

For barrier-free installation, contractor shall provide 5/8" minimum recess for curb in sub floor.

ADA compliance when accessories installed by manufacturer.Note: Exterior floor drain for water run-off recommended.Symmons® is a Registered Trade Mark of Symmons Industries, Inc.Moen® is a Registered Trade Mark of Moen Corporation.

Architect’s Specifications

Furnish and install one-piece gel-coated fiberglass shower stall Model 35-62H designed for barrier-free use as manufactured by Florestone Products Company. Basic shower will conform to ANSI-Z-124.2 and the accessorized module to ANSI-A-117.1. Unit to include stainless steel curtain rod; Symmons® pressure balance mixing valve with concealed check stops; Moen®

hand-held shower head with hose and stainless steel slide bar/grab bar; stainless steel corner grab bar; stainless steel recessed soap dish; white naugahyde folding wheelchair transfer seat (specify right or left hand).

Supplied with 2" brass drain.

Shower curtain optional.

Curtain Size: 72" x 78".

Standard Color: White.

Special order colors available.

Florestone Model 35-62H Barrier-Free Shower

2851 Falcon Drive • Madera, CA 93637

T. 559.661.4171 • T. 800.446.8827

F. 559.661.2070 • florestone.com

O.D. = 62" x 34" x 80"I.D. = 60" x 31½" x 79" Weight: 280 lbs.

Standards:

I.A.P.M.O. File No. 0687ANSI-Z-124.2 & ANSI-A-117.1CA-TITLE-24

32½"

31"

1" Flange

60"

62"

13½"33½"

33"to

36"*

79"

⅞"

30"

18"*

80"

ControlArea

Specify Right or Left Hand Seat

Page 6: 34-62H — ADA  · PDF file34-62H — ADA Compliant Dimensions subject to change without notice. Contact Florestone Products to verify product specifications. ADA COMPLIANT*

Dimensions subject to change without notice.

Contact Florestone Products to verify

product specifications.

Dimensions may vary ± ¼" inch. Please check unit before installation.

For barrier-free installation, contractor shall provide 5/8" minimum recess for curb in sub floor.

ADA compliance when accessories installed by manufacturer.Note: Exterior floor drain for water run-off recommended.Symmons® is a Registered Trade Mark of Symmons Industries, Inc.Moen® is a Registered Trade Mark of Moen Corporation.

Architect’s Specifications

Florestone Model 3PC-35-62H Barrier-Free Shower

2851 Falcon Drive • Madera, CA 93637

T. 559.661.4171 • T. 800.446.8827

F. 559.661.2070 • florestone.com

3P

C-3

5-6

3H

— A

DA

Com

pli

an

t /

CA

AD

A C

om

pli

an

t

Furnish and install three-piece gel-coated fiberglass shower stall Model 3PC-35-62H designed for barrier-free use as manufactured by Florestone Products Company. Basic shower will conform to ANSI-Z-124.2 and the accessorized module to ANSI-A-117.1. Unit to include stainless steel curtain rod; Symmons® pressure balance mixing valve with concealed check stops; Moen® hand-held shower head with hose and stainless steel slide bar/grab bar; stainless steel corner grab bar; stainless steel recessed soap dish; white naugahyde folding wheelchair transfer seat (specify right or left hand).

Supplied with 2" brass drain.

Shower curtain optional.

Curtain Size: 72" x 78".

Standard Color: White.

Special order colors available.

Standards:

I.A.P.M.O. File No. 0687ANSI-Z-124.2 & ANSI-A-117.1CA-TITLE-24

O.D. = 62" x 34" x 80"

I.D. = 60" x 31½" x 79" Weight: 290 lbs.

ADACOMPLIANT*

CALIFORNIAADACOMPLIANT*

Note: Units sold in CA

DO NOT come with a slide bar.

Instead a stationary wall hook

will be installed per CA-ADA

requirements (2008).

32½"

31"

1" Flange

60"

62"

13½"34"

33"to

36"*

79"

⅞"

30"

18"*

80"

ControlArea

21"

Specify Right or Left Hand Seat

Page 7: 34-62H — ADA  · PDF file34-62H — ADA Compliant Dimensions subject to change without notice. Contact Florestone Products to verify product specifications. ADA COMPLIANT*

39-6

2H

— A

DA

Com

plia

nt

Dimensions subject to change without notice.

Contact Florestone Products to verify

product specifications.

ADACOMPLIANT*

Dimensions may vary ± ¼" inch. Please check unit before installation.

For barrier-free installation, contractor shall provide 5/8 " minimum recess for curb in sub floor.

ADA compliance when accessories installed by manufacturer.Note: Exterior floor drain for water run-off recommended.Symmons® is a Registered Trade Mark of Symmons Industries, Inc.Moen® is a Registered Trade Mark of Moen Corporation.

Architect’s Specifications

Furnish and install one-piece gel-coated fiberglass shower stall Model 39-62H designed for barrier-free use as manufactured by Florestone Products Company. Basic shower will conform to ANSI-Z-124.2. and the accessorized module to ANSI-A-117.1. Unit to include stainless steel curtain rod; Symmons® pressure balance mixing valve with concealed check stops; Moen® hand-held shower head with hose and stainless steel slide bar/grab bar; stainless steel wrap-around grab bar; stainless steel recessed soap dish.

Supplied with 2" brass drain.

Shower curtain optional.

Curtain Size: 72" x 72".

Standard Color: White.

Special order colors available.

Florestone Model 39-62H Barrier-Free Shower

2851 Falcon Drive • Madera, CA 93637

T. 559.661.4171 • T. 800.446.8827

F. 559.661.2070 • florestone.com

O.D. = 62" x 39" x 77"I.D. = 60" x 37" x 76"Weight: 285 lbs.

Standards:

I.A.P.M.O. File No. 0687ANSI-Z-124.2 & ANSI-A-117.1

33"to

36"*

⅞"

76"

38"

31"

36"

60"62"

17"39"

77"

ControlArea

" Nailing Flange

Page 8: 34-62H — ADA  · PDF file34-62H — ADA Compliant Dimensions subject to change without notice. Contact Florestone Products to verify product specifications. ADA COMPLIANT*

Dimensions subject to change without notice.

Contact Florestone Products to verify

product specifications.

ADACOMPLIANT*

Dimensions may vary ± ¼" inch. Please check unit before installation.

For barrier-free installation, contractor shall provide 1¾" minimum recess for curb in sub floor.

ADA compliance when accessories installed by manufacturer.Note: Exterior floor drain for water run-off recommended.Symmons® is a Registered Trade Mark of Symmons Industries, Inc.Moen® is a Registered Trade Mark of Moen Corporation.

Architect’s Specifications

FlorestoneModel 39-62H Tile BackBarrier-Free Shower

2851 Falcon Drive • Madera, CA 93637

T. 559.661.4171 • T. 800.446.8827

F. 559.661.2070 • florestone.com

39-6

2H

TB

— A

DA

Com

pli

an

t

Furnish and install one-piece gel-coated fiberglass shower stall Model 39-62H TB designed for barrier-free use as manufactured by Florestone Products Company. Basic shower will conform to ANSI-Z-124.2. and the accessorized module to ANSI-A-117.1. Unit to include stainless steel curtain rod; Symmons® pressure balance mixing valve with concealed check stops; Moen® hand-held shower head with hose and stainless steel slide bar/grab bar; stainless steel wrap-around grab bar; stainless steel recessed soap dish.

Supplied with 2" brass drain.

Shower curtain optional.

Curtain Size: 72" x 72".

Standard Color: White.

Special order colors available.

O.D. = 62" x 39" x 78" I.D. = 60" x 37" x 75" Weight: 285 lbs.

Standards:

I.A.P.M.O. File No. 0687ANSI-Z-124.2 & ANSI-A-117.1

33"to

36"*

2"

77"

38"

31"

36"

60"62"

17"39"

78"

ControlArea

" Nailing Flange

Page 9: 34-62H — ADA  · PDF file34-62H — ADA Compliant Dimensions subject to change without notice. Contact Florestone Products to verify product specifications. ADA COMPLIANT*

3P

C-3

9-6

2H

— A

DA

Com

plia

nt

Dimensions subject to change without notice.

Contact Florestone Products to verify

product specifications.

ADACOMPLIANT*

Dimensions may vary ± ¼" inch. Please check unit before installation.

For barrier-free installation, contractor shall provide 5/8" minimum recess for curb in sub floor.

ADA compliance when accessories installed by manufacturer.Note: Exterior floor drain for water run-off recommended.Symmons® is a Registered Trade Mark of Symmons Industries, Inc.Moen® is a Registered Trade Mark of Moen Corporation.

Architect’s Specifications

Furnish and install three-piece gel-coated fiberglass shower stall Model 3PC-39-62H designed for barrier-free use as manufactured by Florestone Products Company. Basic shower will conform to ANSI-Z-124.2 and the accessorized module to ANSI-A-117.1. Unit to include stainless steel curtain rod; Symmons® pressure balance mixing valve with concealed check stops; Moen® hand-held shower head with hose and stainless steel slide bar/grab bar; stainless steel wrap-around grab bar; stainless steel recessed soap dish.

Supplied with 2" brass drain.

Shower curtain optional.

Curtain Size: 72" x 72".

Standard Color: White.

Special order colors available.

Florestone Model 3PC-39-62H Barrier-Free Shower

2851 Falcon Drive • Madera, CA 93637

T. 559.661.4171 • T. 800.446.8827

F. 559.661.2070 • florestone.com

O.D. = 62" x 39" x 77"I.D. = 60" x 37" x 76"Weight: 295 lbs.

Standards:

I.A.P.M.O. File No. 0687ANSI-Z-124.2 & ANSI-A-117.1

33"to

36"*

⅞"

76"

38"

31"

36"

60"62"

17"39"

77"

ControlArea

" Nailing Flange

21"

Page 10: 34-62H — ADA  · PDF file34-62H — ADA Compliant Dimensions subject to change without notice. Contact Florestone Products to verify product specifications. ADA COMPLIANT*

Dimensions subject to change without notice.

Contact Florestone Products to verify

product specifications.

Dimensions may vary ± ¼" inch. Please check unit before installation.

For barrier-free installation, contractor shall provide 1¾" minimum recess for curb in sub floor.

ADA compliance when accessories installed by manufacturer.Note: Exterior floor drain for water run-off recommended.Symmons® is a Registered Trade Mark of Symmons Industries, Inc.Moen® is a Registered Trade Mark of Moen Corporation.

Architect’s Specifications

FlorestoneModel 40-62H Tile BackBarrier-Free Shower

2851 Falcon Drive • Madera, CA 93637

T. 559.661.4171 • T. 800.446.8827

F. 559.661.2070 • florestone.com

40-6

2H

TB

— C

A A

DA

Com

pli

an

t /

CA

AD

A C

om

pli

an

t

Furnish and install one-piece gel-coated fiberglass shower stall Model 40-62H TB designed for barrier-free use as manufactured by Florestone Products Company. Basic shower will conform to ANSI-Z-124.2 and the accessorized module to ANSI-A-117.1. Unit to include stainless steel curtain rod; Symmons® pressure balance mixing valve with concealed check stops; Moen®

hand-held shower head with hose and stainless steel slide bar/grab bar; stainless steel wrap-around grab bar; stainless steel recessed soap dish; white naugahyde folding wheelchair transfer seat (specify right or left hand).

Supplied with 2" brass drain.

Shower curtain optional.

Curtain Size: 72" x 72".

Standard Color: White.

Special order colors available.

Standards:

I.A.P.M.O. File No. 0687ANSI-Z-124.2 & ANSI-A-117.1CA-TITLE-24

O.D. = 62" x 39" x 78"

I.D. = 60" x 37" x 75" Weight: 310 lbs.

ADACOMPLIANT*

CALIFORNIAADACOMPLIANT*

Note: Units sold in CA

DO NOT come with a slide bar.

Instead a stationary wall hook

will be installed per CA-ADA

requirements (2008).

ControlArea

38"

31"

1" Flange

60"

62"

17"39"

33"to

36"*

77"

2"

36"

18"*

78"

Specify Right or Left Hand Seat

Page 11: 34-62H — ADA  · PDF file34-62H — ADA Compliant Dimensions subject to change without notice. Contact Florestone Products to verify product specifications. ADA COMPLIANT*

40-6

2H

— A

DA

Com

plia

nt / C

A A

DA

Com

plia

nt

Dimensions subject to change without notice.

Contact Florestone Products to verify

product specifications.

ADACOMPLIANT*

CALIFORNIAADACOMPLIANT*

Note: Units sold in CA

DO NOT come with a slide bar.

Instead a stationary wall hook

will be installed per CA-ADA

requirements (2008).

Dimensions may vary ± ¼" inch. Please check unit before installation.

For barrier-free installation, contractor shall provide 5/8" minimum recess for curb in sub floor.

ADA compliance when accessories installed by manufacturer.Note: Exterior floor drain for water run-off recommended.Symmons® is a Registered Trade Mark of Symmons Industries, Inc.Moen® is a Registered Trade Mark of Moen Corporation.

Architect’s Specifications

Furnish and install one-piece gel-coated fiberglass shower stall Model 40-62H designed for barrier-free use as manufactured by Florestone Products Company. Basic shower will conform to ANSI-Z-124.2 and the accessorized module to ANSI-A-117.1. Unit to include stainless steel curtain rod; Symmons® pressure balance mixing valve with concealed check stops; Moen®

hand-held shower head with hose and stainless steel slide bar/grab bar; stainless steel wrap-around grab bar; stainless steel recessed soap dish; white naugahyde folding wheelchair transfer seat (specify right or left hand).

Supplied with 2" brass drain.

Shower curtain optional.

Curtain Size: 72" x 72".

Standard Color: White.

Special order colors available.

Florestone Model 40-62H Barrier-Free Shower

2851 Falcon Drive • Madera, CA 93637

T. 559.661.4171 • T. 800.446.8827

F. 559.661.2070 • florestone.com

O.D. = 62" x 39" x 77"I.D. = 60" x 37" x 76" Weight: 310 lbs.

Standards:

I.A.P.M.O. File No. 0687ANSI-Z-124.2 & ANSI-A-117.1CA-TITLE-24

38"

31"

1" Flange

60"

62"

17"39"

33"to

36"*

76"

⅞"

36"

18"*

77"

ControlArea

Specify Right or Left Hand Seat

Page 12: 34-62H — ADA  · PDF file34-62H — ADA Compliant Dimensions subject to change without notice. Contact Florestone Products to verify product specifications. ADA COMPLIANT*

Dimensions subject to change without notice.

Contact Florestone Products to verify

product specifications.

ADACOMPLIANT*

Dimensions may vary ± ¼" inch. Please check unit before installation.

For barrier-free installation, contractor shall provide 5/8" minimum recess for curb in sub floor.

ADA compliance when accessories installed by manufacturer.Note: Exterior floor drain for water run-off recommended.Symmons® is a Registered Trade Mark of Symmons Industries, Inc.Moen® is a Registered Trade Mark of Moen Corporation.

Architect’s Specifications

Florestone Model 3PC-40-62H Barrier-Free Shower

2851 Falcon Drive • Madera, CA 93637

T. 559.661.4171 • T. 800.446.8827

F. 559.661.2070 • florestone.com

3 P

C-4

0-6

2H

— A

DA

Com

pli

an

t /

CA

AD

A C

om

pli

an

t

Furnish and install three-piece gel-coated fiberglass shower stall Model 3PC-40-62H designed for barrier-free use as manufactured by Florestone Products Company. Basic shower will conform to ANSI-Z-124.2 and the accessorized module to ANSI-A-117.1. Unit to include stainless steel curtain rod; Symmons® pressure balance mixing valve with concealed check stops; Moen® hand-held shower head with hose and stainless steel slide bar/grab bar; stainless steel corner grab bar; stainless steel recessed soap dish; white naugahyde folding wheelchair transfer seat (specify right or left hand).

Supplied with 2" brass drain.

Shower curtain optional.

Curtain Size: 72" x 72".

Standard Color: White.

Special order colors available.

O.D. = 62" x 39" x 77"

I.D. = 60" x 37" x 76" Weight: 320 lbs.

Standards:

I.A.P.M.O. File No. 0687ANSI-Z-124.2 & ANSI-A-117.1CA-TITLE-24

ADACOMPLIANT*

CALIFORNIAADACOMPLIANT*

Note: Units sold in CA

DO NOT come with a slide bar.

Instead a stationary wall hook

will be installed per CA-ADA

requirements (2008).

38"

31"

1" Flange

60"

62"

17"39"

33"to

36"*

76"

⅞"

36"

18"*

77"

ControlArea

21"

Specify Right or Left Hand Seat

Page 13: 34-62H — ADA  · PDF file34-62H — ADA Compliant Dimensions subject to change without notice. Contact Florestone Products to verify product specifications. ADA COMPLIANT*

60-3

1H

TS

— A

DA

Com

plia

nt / C

A A

DA

Com

plia

nt

Dimensions subject to change without notice.

Contact Florestone Products to verify

product specifications.

ADACOMPLIANT*

CALIFORNIAADACOMPLIANT*

Note: Units sold in CA

DO NOT come with a slide bar.

Instead a stationary wall hook

will be installed per CA-ADA

requirements (2008).

Dimensions may vary ± ¼" inch. Please check unit before installation.

Symmons® is a Registered Trade Mark of Symmons Industries, Inc.Moen® is a Registered Trade Mark of Moen Corporation.

Architect’s Specifications

Furnish and install one-piece gel-coated fiberglass shower stall Model 60-31HTS designed for barrier-free use as manufactured by Florestone Products Company. Basic shower will conform to ANSI-Z-124.2 and the accessorized module to ANSI-A-117.1. Unit to include stainless steel curtain rod; Symmons® pressure balance mixing valve with concealed check stops; Moen® hand-held shower head with hose and stainless steel slide bar/grab bar; stainless steel grab bars; 3 each 24", 2 each 18"; molded corner soap dish; folding seat.

Shower curtain optional.

Curtain Size: 72" x 72".

Standard Color: White.

Special order colors available.

Florestone Model 60-31HTS Tub/Shower

2851 Falcon Drive • Madera, CA 93637

T. 559.661.4171 • T. 800.446.8827

F. 559.661.2070 • florestone.com

Standards:

I.A.P.M.O. File No. 0687ANSI-Z-124.2 & ANSI-A-117.1CA-TITLE-24

59¾" x 32" x 80½" Weight: 200 lbs.

31"

6½"

15½"

56"59¾"

32"

33"to

36"*

79"

13"

80½"

14½"

Specify Right or Left Hand Drain

Page 14: 34-62H — ADA  · PDF file34-62H — ADA Compliant Dimensions subject to change without notice. Contact Florestone Products to verify product specifications. ADA COMPLIANT*

Dimensions subject to change without notice.

Contact Florestone Products to verify

product specifications.

ADACOMPLIANT*

Dimensions may vary ± ¼" inch. Please check unit before installation.

Symmons® is a Registered Trade Mark of Symmons Industries, Inc.Moen® is a Registered Trade Mark of Moen Corporation.

Architect’s Specifications

FlorestoneModel 60-31HTS Tile BackTub/Shower

2851 Falcon Drive • Madera, CA 93637

T. 559.661.4171 • T. 800.446.8827

F. 559.661.2070 • florestone.com

60-3

1 H

TS

TB

— A

DA

Com

pli

an

t /

CA

AD

A C

om

pli

an

t

Furnish and install one-piece gel-coated fiberglass shower stall Model 60-31 HTS TB as manufactured by Florestone Products Company. Basic shower will conform to ANSI-Z-124.2 and the accessorized module to ANSI-A-117.1. Unit to include stainless steel curtain rod; Symmons® pressure balance mixing valve with concealed check stops; Moen® hand-held shower head with hose and mounting bracket; stainless steel grab bars; 3 each 24", 2 each 18"; molded corner soap dish; folding seat.

Shower curtain optional

Curtain Size: 72" x 72"

Standard Color: White

Special order colors available

59¾" x 32" x 80½"Weight: 200 lbs.

Standards:

I.A.P.M.O. File No. 0687ANSI-Z-124.2 & ANSI-A-117.1CA-TITLE-24

ADACOMPLIANT*

CALIFORNIAADACOMPLIANT*

Note: Units sold in CA

DO NOT come with a slide bar.

Instead a stationary wall hook

will be installed per CA-ADA

requirements (2008).

31"

6½"

15½"

56"59¾"

32"

33"to

36"*

79"

13"

80½"

14½"

Specify Right or Left Hand Drain

Page 15: 34-62H — ADA  · PDF file34-62H — ADA Compliant Dimensions subject to change without notice. Contact Florestone Products to verify product specifications. ADA COMPLIANT*

3P

C-6

0-3

1H

TS

— A

DA

Com

plia

nt / C

A A

DA

Com

plia

nt

Dimensions subject to change without notice.

Contact Florestone Products to verify

product specifications.

ADACOMPLIANT*

CALIFORNIAADACOMPLIANT*

Note: Units sold in CA

DO NOT come with a slide bar.

Instead a stationary wall hook

will be installed per CA-ADA

requirements (2008).

Dimensions may vary ± ¼" inch. Please check unit before installation.

Symmons® is a Registered Trade Mark of Symmons Industries, Inc.Moen® is a Registered Trade Mark of Moen Corporation.

Architect’s Specifications

Furnish and install one-piece gel-coated fiberglass shower stall Model 3PC-60-31HTS designed for barrier-free use as manufactured by Florestone Products Company. Basic shower will conform to ANSI-Z-124.2 and the accessorized module to ANSI-A-117.1. Unit to include stainless steel curtain rod; Symmons® pressure balance mixing valve with concealed check stops; Moen® hand-held shower head with hose and stainless steel slide bar/grab bar; stainless steel grab bars; 3 each 24", 2 each 18"; molded corner soap dish; folding seat.

Shower curtain optional.

Curtain Size: 72" x 72".

Standard Color: White.

Special order colors available.

Florestone Model 3PC-60-31HTS Tub/Shower

2851 Falcon Drive • Madera, CA 93637

T. 559.661.4171 • T. 800.446.8827

F. 559.661.2070 • florestone.com

Standards:

I.A.P.M.O. File No. 0687ANSI-Z-124.2 & ANSI-A-117.1

59¾" x 32" x 80½" Weight: 200 lbs.

31"

6½"

15½"

56"59¾"

32"

33"to

36"*

79"

13"23"

80½"

14½"

Specify Right or Left Hand Seat

Page 16: 34-62H — ADA  · PDF file34-62H — ADA Compliant Dimensions subject to change without notice. Contact Florestone Products to verify product specifications. ADA COMPLIANT*

Dimensions subject to change without notice.Contact Florestone Products to verify product specifications.

For barrier-free installation, contractor shall provide 1½" minimum recess for curb in sub floor.

Architect’s Specifications

Florestone Model 400 Barrier-Free Terrazzo-Shower Receptor

2851 Falcon Drive • Madera, CA 93637

T. 559.661.4171 • T. 800.446.8827

F. 559.661.2070 • florestone.com

Mod

els

400 B

arr

ier-

Fre

e R

ece

pto

r

Furnish and install wheelchair accessible Terrazzo Shower Receptor Model 400 as manufactured by Florestone Products Company. Flanges on three sides, cast integral, shall be of galvanized - bonderized steel and shall extend not less than 1" above the shoulders. Shoulders on three sides shall be not less than 2½" inside. Threshold shall be not more than ½" above receptor floor to allow for barrier free entrance. Drain body shall be brass, cast integral, and shall provide for a non-caulked connection not less than one inch deep to a 2" pipe. Removable type stainless steel strainer plate shall be supplied. Receptor shall be manufactured of tan and white marble chips cast in white Portland cement to produce a compressive strength of not less than 3,000 PSI, seven days after casting. Terrazzo surface shall be ground, polished, and the entire unit sealed to resist stains and moisture. Receptors reinforced with 16-gauge wire.

OptionsOffset drain. Additional flanges. (Drawings required)

Note: Terrazzo is not designed to be used with anything that is over 130 degrees Fahrenheit.

Model 400Barrier free, center drain Terrazzo Shower Receptors with reduced threshold height.

Some Models Conform to ADA REQUIREMENTS*

A* B C D E WT.

36" 36" 18" 18" 18" 315

40" 38" 20" 20" 19" 370

42" 42" 21" 21" 21" 381

42" 36" 21" 21" 18" 365

48" 36" 24" 24" 18" 445

48" 48" 24" 24" 24" 550

60" 32" 30" 30" 16" 435

60" 36" 30" 30" 18" 500

63" 33" 31½" 31½" 16½" 500

* Width of threshold (other sizes available upon request) Conforms to ADA Requirements

AC D

E

B

2½"

4½"

1½"

3"

2"

Page 17: 34-62H — ADA  · PDF file34-62H — ADA Compliant Dimensions subject to change without notice. Contact Florestone Products to verify product specifications. ADA COMPLIANT*

Dimensions subject to change without notice.

Contact Florestone Products to verify

product specifications.

ADACOMPLIANT*

Dimensions may vary ± ¼" inch. Please check unit before installation.

For barrier-free installation, contractor shall provide 1/2" minimum recess for curb in sub floor.

ADA compliance when accessories installed by manufacturer.

Architect’s Specifications

Florestone Model 4040F Barrier-Free Molded Fiberglass Shower Receptor

2851 Falcon Drive • Madera, CA 93637

T. 559.661.4171 • T. 800.446.8827

F. 559.661.2070 • florestone.com

4040F-B

F —

AD

A C

om

pli

an

t

Furnish and install one piece shower unit Model 4040F-BF as manufactured by Florestone Products Company. Unit to be manufactured of gel-coated fiberglass and to be supplied with slip-resistant floor laminated for extra rigidity. Color will be white (unless otherwise specified). Unit to be supplied with a 2" BNC brass non-caulk drain.

Standard Color: White

Optional Colors: Color matching for most major manufacturers’ colors is available.

Standards:

I.A.P.M.O. File No. 0687ANSI Z-124.2 HUD/FHA National Specifications UN-73CSA TEST Warnock Hersey Listed: CAN/CSA-B45.0-CAN/USA-B45.5

ADACOMPLIANT*

UPC MARKINGGlue-on Label

2"3"

40"

40"

20"

OD

Manufacturer’s Name and Model Number Glue-on Label

Slope to Drain¼"to 1'

2"40"

20"3"4 "1"

20"

One piece, single threshold model for recessed installation. Features 1" flange on three remaining sides.


Top Related