door handles - regal inline lever lever › globalassets › era › ... · regal sprung inline...
TRANSCRIPT
Stylish Lever HandleDeveloped to replicate traditional forged hardware in appearance and durability
Supplied with screw and spindle pack to suit 44-48mm profilesEverything needed for installation included
Colour coordinated screw headsPerfectly matching hardware, even down to the smallest details
Solid die cast construction with heavy duty spring cassetteSturdy feel and consistent 90 degree lever return
Wide backplateTo suit cylinder guards and accommodate larger cylinder preparation
Supplied with care instructionsHelps the homeowner to keep the hardware in optimal condition
Supplied fully assembledSimple and quick installation, no need to fit springs or lever
Silicon Site-Protectors availableEnsures perfect condition after installation
Each part packaged in a separate chamber, but supplied as a setNo scratching of parts during transit
Features
Door Handles
ForgedBlack
HardexPewter
Regal Sprung Inline Lever Lever
WEATHERSEALS
STEEL
CROMPTON
VIRTICAL
SLIDING DOORS
TILT & TURN
WINDOW
S
CASEMENT W
INDOWS
SHED,GARAGES,
GATES & OTHER
FRENCH PATIO
&SLIDING DOORS
INTERNAL DOORS
EXTERNAL DOORS
YEAR10
Mechanical Guarantee
Door Handles
All dimensions are in mm and are nominal. Fab&Fix reserves the right to change specification without notice
It is the responsibility of the door manufacturer to ensure that the finished product meets any required safety and performance specification.
Tel: +44 1922 490049 Fax: +44 1922 494420 [email protected] Valiant Way, Wolverhampton, West Midlands WV9 5GB United Kingdom
www.eraeverywhere.com
Regal Inline Lever LeverFinish Part No.
Product
Hardex Pewter DHMRGL-PTForged Black DHMRGL-FB
Ordering Details
Coatings:
Handle Grip and Backplate:
Spindle / Screws:
Cylinder:
Forged Black and Hardex Pewter
High quality Zinc for all finishes.
Machine screws with colour coordinated heads for handle. 44mm - 48mm profiles (1 x 8mm x 90mm spindle; 2 x 60mm M5 screws)
Euro Cylinder, 92mm PZ
Technical InformationCorrosion resistance
PerformanceTested to meet the requirements of PAS 24 as part of a compliant door set.
Operation
Meets the requirements of BS EN 1670:2007 Grade 5 (480 hours)
Endurance tested in excess of 200,000 cycles
Material Specification
PackagingHandlesIndividually bagged with screws, spindle and care instructions. 15 handles in an outer box.
For continued protection of the quality finish and appearance, Fab&Fix advise routine cleaning of all our external hardware. Moving parts should also be lightly lubricated at least twice a year. This procedure is particularly essential if products are used within a 25-mile radius of coastal areas or close proximity to building sites or large industrial areas, where more frequent cleaning may be required to prevent the accumulation of corrosive contaminants.
Maintenance
For additional part numbers please contact our sales o�ce.
WEATHERSEALS
STEEL
CROMPTON
VERTICAL
SLIDING DOORS
TILT & TURN
WINDOW
S
CASEMENT W
INDOWS
SHED,GARAGES,
GATES & OTHER
FRENCH PATIO
&SLIDING DOORS
INTERNAL DOORS
EXTERNAL DOORS
Regal Sprung Inline Lever Lever
243.00
117.00 32.00
60.
00
75.
00
211
.00
11.50
211
.00
87