door frame metal detectorweight : 270 g (with batteries) buzzer, vibration, on, metal, detection,...

DOOR FRAME METAL DETECTOR MODEL No.1 SGS-10

MODEL No.2SGS -10 Adv.Unique Feature : With camera and DVR for video recording

Counter : Six digit Counter for automatic counting & indicates of persons going IN, OUT and NET IN.Operational Frequencies : user Selectable Sensitivity : AdjustableZone : Single ZoneMetal Detection : Detects Ferrous, Non Ferrous, Ferrite & Alloys Uniformly.Power : Rechargeable 6V 4.5 Ah, SMF battery. Automatic Change Over. When AC Power failure.

Also works with AC 90V to 270V AC. Long Battery operationSize : 200cms / 72 cmIndication : Separate LED for ferrite detection , LED bar graph for Percentage of metal separate LED for

low,Medium and high metal. Operating Temperature : -10°C to 55°CStorage Temperature : -30°C to 65°CHumidity : Upto 95 %Construction : Light weight, rigid, laminated side panel and cross pieces.External Interference : RS 232 connector for computer connectivity(optional)?Walk and Stop Indicator : Inbuilt Walk & Stop indicator.

The Door Frame Metal Detector can be made according to the specifications given by the customer also, keeping in mind of the clear passage for entry gate. CUSTOMIZED colors also available with printing on both sides.

International StandardAll Weather AccessibilityUsers FriendlyModern TechnologyPassword protection facility (on demand)Round the clock service at doorstep.Manual/Membrane key board

At a Glance

TECHNICAL SPECIFICATIONS

?Micro-processor based technology?Six digit counter for automatic counting. Special provisions to

record data of visitors under IN, OUT and NET IN.?IR Sensors installation to avoid unnecessary alarm indication

for metal movement outside the Door Frame.?Separate LED and alarm for ferrite detection?Durable laminated penal frame, water proof with high level

heat tolerance. ?Easy provision for assemble and disassemble.?High performance Walk through metal detector which exceeds

all International Security Standards (ISS).?Unique design and fabrications to give an ease to the operator,

for accurate indications and detections?Detects a pistol even when concealed with ferrite rod in all

possible orientations.?Can be operated more than one frame at the same time even

if installed close together.?Inbuilt Control Unit?WALK/STOP indicators?LED Display?Auto setting

Common Features:

Satguru Sewak Electronics, Near Chandigarh, INDIA

All the details given in this catalogue are meant for sales promotion purposes. For tenders, please ask for required compliance.The above mentioned product(s) are tested, approved and certified by the test laboratory - NABL India

DOOR FRAME METAL DETECTOR -MultiZoneMODEL No.1 SGS- MZ10 International Standard

All Weather AccessibilityUsers FriendlyModern TechnologyPassword protection facility (on demand)Available in various zonesRound the clock service at doorstep.

At a Glance

( Available range : 4 zone to 33 zone)

Satguru Sewak Electronics

Features:

?Microprocessor based technology

?Six digit counter for automatic alarm counting.

?IR Sensors installation to avoid unnecessary alarm indication for metal movement outside the Door Frame.

?Durable laminated penal frame, water proof with high level heat tolerance.

?Easy provision for assemble and disassemble.

?High performance Walk through metal detector which exceeds all International Security Standards (ISS).

?Unique design and fabrications to give an ease to the operator, for accurate indications and detections

?Detects a pistol even when concealed with ferrite rod in all possible orientations.

?Can be operated more than one frame at the same time even if installed close together.

?Inbuilt Control Unit

?WALK/STOP indicators

?LED Display

?Auto setting


Counter : Six digit Counter for automatic alarm counting. Indicates and keep record of persons going through.Operational Frequencies : user Selectable Zone : 8 zoneSensitivity : Adjustable (Individual zone and overall)Metal Detection : Detects Ferrous, Non Ferrous, Ferrite & Alloys Uniformly.Power : Rechargeable 12V 7Ah, SMF battery. Automatic Change Over. When AC Power failure. Also Works AC

90V to 270V AC. 8 hours battery backup operation.Size : 200cms / 72 cmIndication : LED bar graph for percentage of metal separate LED for low, medium and high metal. Operating Temperature : -10°C to 55°CStorage Temperature : -30°C to 65°CHumidity : Upto 95%Construction : Light weight, rigid, laminated side panel and cross pieces.External Interference : RS 232 connector for computer connectivity (optional)Walk and Stop Indicator : Inbuilt Walk & Stop indicator.

The Door Frame Metal Detector can be made according to the specifications given by the customer also, keeping in mind of the clear passage for entry gate. CUSTOMIZED colors also available with printing on both sides.



2

PORTABLE DOOR FRAME METAL DETECTOR

MODEL No.1 SGS-11

MODEL No.2SGS -11 Adv.Unique Feature : With camera and DVR for video recording

International StandardAll Weather AccessibilityUsers FriendlyModern TechnologyPassword protection facility (on demand)Easy to carryRound the clock service at your doorstep.Manual/Membrane key board

At a Glance


Common Features:

?Microprocessor based technology

?Six digit counter for automatic counting. Special provisions to record data of visitors under IN, OUT and NET IN.

?IR Sensors installation to avoid unnecessary alarm indication for metal movement outside the Door Frame.

?Separate LED and alarm for ferrite detection

?Durable pipe frame, water proof with high level heat tolerance.

?Easy provision for assemble and disassemble.

?High performance walk through metal detector which exceeds all International Security Standards (ISS).

?Unique design and fabrications to give an ease to the operator, for accurate indications and detections

?Detects a pistol even when concealed with ferrite rod in all possible orientations.

?Can be operated more than one frame at the same time even if installed close together.

?Inbuilt Control Unit

?WALK/STOP indicators (optional)

?LED Display

?Auto setting

Counter : Six digit Counter for automatic counting.

Operational Frequencies : user selectable

Sensitivity : Adjustable

Metal Detection : Detects Ferrous, Non Ferrous, Ferrite & Alloys uniformly.

Power : Rechargeable 6V 4.5 Ah, SMF battery. Automatic Change Over. When AC Power failure. Also Works AC 90V to 270V AC. Long Battery operation

Size : 200cms / 72 cm

Indication : Separate LED for ferrite detection , LED bar graph for Percentage of metal separate LED for low, Medium and high metal.

Operating Temperature : -10°C to 55°C

Storage Temperature : -30°C to 65°C

Humidity : Up to 95 %

Construction : Light weight, foldable and can be put in a canvas bag. and electronic control fitted in small briefcase. External Interference : RS 232 connector for computer connectivity(optional)

Walk and Stop Indicator : Walk & Stop indicator (Optional)



3

HAND HELD METAL DETECTOR


• Working Principle Pulse Indication Technology.• Auto Setting• Simple Push Button operation• Light weight, easy to carry• Very low frequency safe for pacemakers and pregnant women, Magnetic tapes,

electronics Device.• Detects ferrous, non-ferrous, ferrite rods & metal concealed with ferrite rods.

Break-Resistant Metal Body

• • Dimensions : Length: 400 mm, Width: 55 mm, Thickness:32mm• Length of search coil : 220x100 mm Area of Search coil : 220 Sq.cm • Indicators : Green LED for mains on yellow LED for low battery and

red for Detection.• Power source : Ni-Cd Rechargeable battery(1.2 V x 4) or dry battery. • Sensitivity : Paper Pin from 5 -15mm

25 paisa coin from 20-30mm,1 rupee coin from 40- 50 mm

• Separate smart charger.• Operating temperature : -10°C to 55°C• Humidity : 95 % RH

• Battery Charger

• Charging current : 50 ma

• Output Voltage : 6V DC

• Protection : Short Circuit & reverse polarity

• Operation: 90V AC to 270V AC

Weight : 500 g (with Batteries)

MODEL : SGS-H100

MODEL : SGS-H500



• Working Principle Pulse Indication Technology.• Auto Setting• Simple Push Button operation• Light weight• Very low frequency safe for pacemakers and pregnant women, Magnetic tapes, electronics Device.• Detects ferrous, non-ferrous, ferrite rods & metal concealed with ferrite rods.• plastic molded cabinet. ABS/Nylon

• • Dimensions : Length: 420 mm, Width: 138 mm, Height :35mm • Indicators :• Power source : Battery: 9 V rechargeable Battery or Dry battery.• Sensitivity (Detections) : Paper Pin from 5 -15mm

25 paisa coin from 20-30mm1 rupee coin from 40- 50 mm

• Battery Charger




• Operation : 90V AC to 270V AC

Weight : 270 g (with Batteries)

Buzzer, vibration, on, metal, detection, low Battery indicator.



4

• Working Principle Pulse Indication Technology.• Simple Push Button operation• Low/High Sensitivity sw\itch• Light weight, easy to carry• Low frequency safe for pacemakers and pregnant women, Magnetic tapes,

electronics Device.• Detects ferrous, non-ferrous, ferrite rods & metal concealed with ferrite rods.

ABS/Nylon plastic molded cabinet.


BOMB SUPPRESSION BLANKET WITH SAFETY CIRCLE

MODEL : SGS-H700


•• Operating Frequency : 22kHz

• Battery : 9V Rechargeable battery or Dry battery.

• Indicator Visual : Red and green LED.

• Sound : Speaker or Earphone (Earphone optional).

• Control : Low/high Sensitivity Control Switch & Audio/vibration mode Switch.

• Sensitivity : Paper Pin from 5 -15mm

25 paisa coin from 20-30mm 1 rupee coin from 40- 50 mm

• Operating Temperature : -10°C to 55°C , 95% RH

Battery Charger




• Operation : 90V AC to 270V AC

Weight : 450 g

Safety Circle24” height,24” diameter10 layer of Kevlar Aramid fabricInside Polycarbonate sheet

The Bomb Suppression Blanket and Safety Circle has been designed to provide a portable flexible, light weight and compact means of protection from EOD and IEDD devices. It is tough and durable, being manufactured from multiple layers of treated Kevlar Aramid fabric sewn into a fire retardant and water repellent outer cover. Easy to carry.


Bomb Suppression Blanket

Size

Made of 32 layers of Kevlar Aramid fabric

(100x100cms)(150x150cms)(200x200cms)



5

HAND HELD SEARCH LIGHT

MODEL : SGS-SLR Basic SGS-SLR TFCD SGS-SLR Adv.

The hand Held search light SGS–SLR Advanced Model works on 12 V 7 Ah SMF rechargeable battery. Microprocessor based Multifunction with membrane switch and LCD. The SMPS battery charger work on 70V to 270V AC.

Common Features in all Models :

Unique Features in Model SGS-SLR TFCD & SGS-SLR Adv. :

Unique Features in Model SGS-SLR Adv. :

Operating range 1000 meter. High power halogen lamp 12 V, 55 watt.Deep parabolic reflector.Low battery protection circuit.Over charging protection.Shot circuit protection.Long operation on continues mode is 80 minute on single charge.Portable light weight having shoulder strap and handle (4Kg).Works on 12 V 7 Ah, SMF battery.SMPS Battery charger works 70 V AC to 270 V AC.Single mounted Cabinet.Operating temperature -10°C to 55°CStorage Temperature -30°C to 60°CHumidity 95 %

TFCDVariable Timer.Variable auto flashing.Dimmer 1% to 100%.Continues mode.

Membrane switch for mode selection.LCD

PS : With wire and Wireless both options are available on demand.IR sensor can also be installed in all models on demand.




6

Letter area capacity : 5.8cm to 41.2cm (2.25” to 19”)Power Supply for charging : 220V +-10% ACWidth : 9" heightLength : 20" (51cms)Weight : 8.0Kgs.Internal Battery : 6 V DCBattery Backup : 100 Hrs. (on single charge)Accessories : Test card Charger : 90V AC to 270V AC (Inbuilt)Alarm : Audio, visual & Low Battery.Operating temperature : -10°C to 55°CHumidity : 95 %

Letter bomb detector model SGS-LBM-10 reliably Screen and courier Deliveries upto about 2.25” Thickness. It detects all known letter bomb detonating devices regardless of the type of explosive used.

It automatic trigger an alarm on packages containing potentially dangerous explosive device, while ignoring the normal office stationary items contain in mail such as paper clips, staples and other metal.

No special training is required.

It's operated on DC supply and has internal battery charger .Easy to portable and completely safe with camera film, magnetic tapes or computer disks.

LETTER BOMB DETECTOR

ELECTRONIC STETHOSCOPE

MODEL : SGS-LBM10

MODEL : SGS-EM



Technology : Microprocessor based pulse induction.Detection : Detects ferrous, non-ferrous, ferrite rod and other metallic object.

Detect also dangerous explosive device (including detonator) and provision for sensitivity control to avoid normally office stationary like staple, Pins, Paper pins.

Sensitivity control switch

The Electronic Stethoscope (for time based devices) is designed for the EOD field where it is necessary to detect mechanical clockworks fuses in objects suspected to contain explosives, also where weak sound waves have to be detected.

Ni-Cd Maintenance free battery. Electronic Stethoscope is of a very sturdy design fitted with splash water protection. The electronic casing can either be carried on a belt or by a shoulder strap. The headphones are of military design and equipped with well-Padded ear pieces to suppress ambient noise.

It detects Electronics Fuses, Electronics circuits, quartz watches, and cell Phones .This system works on high frequency and penetrates solid material like small bricks work, paper, plastic wood and similar dielectric packing material.

Power Supply : 9.6V, 800mA rechargeable Ni-Cd maintenance free Battery.Battery Charger : Charge battery within 6 Hours through Specially Designed battery charger.Detection : Contactless & Contact (Both).Headphone : Heavy Duty.Principle : Amplification and selection of weak signal.Frequency Range : 2 Hz to 20 KHZ.Operating time : 50 hours single charge.Amplification : 1x10*5.Operating temperature : -10°C to 55°CHumidity : 95%



7

DEEP SEARCH METAL DETECTORMODEL : SGS-MD1000 SGS-MD5000 (with multiple search coils)

SGS electronics Design Deep search metal / mine detector, which detect small and big metallic objects like detonator, mine, fusses, hand guard etc. It's detects ferrous and non-ferrous like M.S, steel, gold, copper, silver, aluminum etc. hidden in underground, under water and under wood etc.

Salient Features

Technology

I t w o r k s p u l s e I n d u c t i o n Technology which is very use full for detect underground /water/ wood etc. It works on very low frequency, no harmful for operator, heart pacemaker and pregnant women. Operating system is very easy or user friendly auto calibration.

Features

Effective detection of all metal and minimum metal contents targets.Accurate Pin Pointing of the target position indicated by Acoustic Modulation.High discrimination Capability For adjacent targets.Automatic Compensation for Mineralized and high natural metal content soil.Long lasting battery life.Extreme high level of electrical and mechanical reliability.

Micro Processor BASEDDetection range Up to 6 FeetPower source rechargeable/ dry batteryCalibration auto.Calibration time 5 To 10 sec.External Battery ChargerLong Battery operation 25 Hrs.Solder strap and Belt mounted.Heavy duty milgrade Connector and switches

Principle : Pulse InductionHandle : Telescopic adjustableControl unit : Light Weight 1.5 Kg.Dimension : 180X125X50mm.Search Coil : Circular 11“Operational weight : 3 KgIndication : System On, Low Battery , Battery charging and detection.Audio : Buzzer and Earphone.LED : Visual LEDCarrying case : Canvas bag and suitcase for transportation.Detection : Ferrous and Non–ferrous.Sensitivity Adjustable : Volume adjustable.Operating temperature : -10°C to 55°CStorage Temperature : -30°C to 65°CHumidity : 95 % Rh.




8

The EOD manipulator / Telescopic manipulator Remote handling tool designed particularly for use in IED operations.

The equipment feature four box section boom which can be extended to an overall length of 3 to 4.5 meter (custom length also available)

Battery powered Robotic Head enables the bomb technician to manipulate or pick up a suspected device or IED with a mass upto 10kg.

The rod having a feature of extended like telescope with adjustable wheeled bipod, control console, ballistic shield to protects hands and console and variable counter weight.

A high Power light can be attached at the boom.

The camera capture will give all the details while working with the unidentified object.

The Equipment is Equipped with electronics claw, with adjustable orientation and variable claw speed when grasping or gripping and releasing a suspected object.

The Telescopic is having a hand / ballistic Shield and BREAK AWAY tip so as to avoid injury to operator in case of accidental detonation.

The equipment is equipped with strong adjustable shoulder strap with foam pad of VELCRO so as to enable easy handling and carriage.

The SMPS Battery charger is suitable for charging lead acid battery pack. It's also work on 220 to 270 AC Voltage.

TELESCOPIC MANIPULATOR

ROAD SAFETY EQUIMENTS

MODEL : SGS-RA0010


Hand / Ballasting ShieldShape : Rectangular / CircularSize :20cmx20cm to 50cmx40cmFragmentation Protection : 700 m/sWeight Of counter Weight: Not more than 18 Kg.Maximum Opening Of Claw: 22cmsWeight Of equipment: Not more than 18 Kg.Minimum standoff distance: 4 Meters.



9

TECHNICAL SPECIFICATIONSThe visual Detection kit (Model SGS-Search-Kit) Is designed to assist in wide variety of rescue operation. Model is designed for use as a stand-alone system for vehicle and industrial accident extrication to fully visualize the victim. It can also be as aid to breaching operation to allow the rescuers to check for structure stability and monitor victim safety.

This combined with the wide-angle camera lens allows the camera to look backward, towards the operator. The 16 Element White LED Illumination and full colour camera provide outstanding picture quality in zero light conditions at a distance from a few inches.

To over six feet (1.8m) away the detachable display provides increased operational flexibility.One hand operations is easy with the display attached or the display you can be removed for limitless probe maneuverability. The probe is machined from high strength aluminum and is built to take a beating.

OPTIONALProvision to attach SGS-Search Kit (wireless) to Laptop with a capacity of 10,000 pictures storage.

?Works in zero light.

?Changes to black & White in low light conditions.

?Color camera with IR sensor.

?8" LCD detachable Display.

?Integrated 16 Element White LED Illumination with dual output.

?360° from the center.

?Water proof camera Head.

?Lightweight Probe.

?12V, 7Ah rechargeable battery with charger.

?Endurance under full load.

?Length Of telescopic Handle Adjustable From 90cm to 180cm, no rotational, light

?Weight with rubberized gripping.

?Operating Temperature -10°C to 55°C.

?Humidity 95%.

VISUAL DETECTION KIT

REMOTE WIRE CUTTER

MODEL : SGS-Search Kit

THERMAL CUTTER



10

SGS Electronic Manufacturing various type of under vehicle search mirror for inspection of vehicles like car, bus,jeep, truck and train.It's very helpful for searching explosives and unidentified things which is placed under and top the vehicles, where physically approaching is not possible.

SGS Electronic Manufacturing various type of under vehicle search mirror for inspection of vehicles like car,bus,Jeep, truck and train.It's very helpful for searching explosives and unidentified things which is placed under and top the vehicles, where physically approaching is not possible.

UNDER VEHICLE SEARCH MIRROR MODEL : SGS-IM1

UNDER VEHICLE SEARCH MIRROR MODEL : SGS-UV FLAT

UNDER VEHICLE SEARCH MIRROR MODEL : SGS-UV ROUND


?Mirror Size 6”.?Telescopic handle.?Dry/Rechargeable LED light.?Mirror Cover for safety.?Soften cushioning under the mirror for safety.?Whether proof.?Adjustable length up to 1.8 meter maximum.?Operating temperature -10°C to 55°C


?Mirror Size 12" x 24".?4 cotter nylon wheels.?Telescopic handle.?Dry/Rechargeable LED light.?Mirror Cover for safety.?Soften cushioning under the mirror for safety.?Whether proof.?Operating temperature -10°C to 55°C.


?35mm convex mirror.?4 Cotter nylon wheels.?Telescopic handle.?Dry/Rechargeable light(For night inspection).?Mirror cover for safety.?Soften cushioning under the mirror for safety.?Whether proof.?Operating temperature -10°C to 55°C

SGS Electronic Manufacturing various type of under vehicle search mirror for inspection of vehicles like car, bus, Jeep, truck and train.It's very helpful for searching explosives and unidentified things which is placed under and top the vehicles, where physically approaching is not possible.



11

Automatic

Semi-Automatic

Fixed

Specifications

The Automatic bollard concealed Traffic bollard is advisable when many transits per day are expected. It can be activated automatically by command given by authorized persons (Cards, remote control etc.) Or by automatic commands operating at set times (hourly programmer).The device has double effect hydraulic activation, with a drive station.

This type concealed bollard should preferably be used when accesses are limited, or Combined with automatic version. It solves parking problems, at a reasonable rates as electrical energy is not required at all. Lifting occurs automatically with a key whereas lowering is achieved by slight foot pressure on the head of concealed bollard.

Fixed traffic bollard is suitable for mixed installations .This makes it possible not to alter the overall architectural appearance.

Drive : HydraulicCylinder stroke : 23 5/8” 31” Cylinder Diamete : 10 3/4”Cylinder Material and Thickness : Fe37steel 1/4”Descent Time : About 5 secondsRise Time : About 5 secondsHydraulic Pump : 230V AC +6% -10% 50 HzAbsorption : 220 WWork Frequency : 10,000 Maneuvers Per dayReelecting strip : Standard Height 2 1/8”Manual Lowering Operation : YESImpact resistance : 15,000 JouleBreak-in-resistance : 1,20,000Dimensions of pit : 22” x 22” x 3' 6”Standard Length : 3.3ftCylinder Surface Thickness : Polyester Powder paint Dark Grey RAL7021Cylinder Top Part : Anticordal case hardened AluminumHead surface Treatment : Polyester Powder paint Dark Grey RAL9006

(Fixed/Automatic/Removable)

SGS Electronics road blockers / traffic spikes are used to control access to or from military bases, car parks, corporate parking facilities, gated communities, hospitals, universities, car rental agencies, airport parking and ground transportation. The SGS Electronics product line is the most extensive, well engineered and best built product for effective and economical controlled access.

Tire deflation device with plastic pedestal material and stainless steel spike(thorn) materialTire deflation in 30 secondsLength: 7 metersBox: PBD board with aluminium alloy barMulti-times useAvailable for each kind of vehicle used as road blockerEasy Installation

Features

ELECTRONIC TRAFFIC BOLLARD MODEL : SGS-ETB

TRAFFIC SPIKE/ROAD BLOCKER MODEL : SGS-RB10



12

SGS electronics Manufacturer of LADY FRISKING CABIN. It's widely used to frisk the female crowd in Places like - showrooms, superstores, shopping malls, banquets halls, amusements parks, exhibitions, Railway stations, metro stations, offices, banks, events, rallies, multiplexes and airports.

Frame - Aluminum/M.S Pipe With Powder Coated.Dimension - Length 3x3x6 feet.Light in Weight.Plastic Sheets/Bakelite sheet/MDF Board in Sides.One Side Curtain.Easy to Carry(Foldable)

Technical specifications

The Traffic cone, safety cones are made of special PVC Material making them highly flexible and durable .If a vehicle hits a cone, it does not get damaged and comes to original shape. Highly reflective sleeve / sheeting is fixed on it for better vision at night and bad weather condition. It also has provision for fixing of plastic chain or caution tape. These also available with heavy weight base fixed at the bottom, due to which it does not fly-off with fast traffic or winds.

ApplicationsCenter Lane Division. Parking lots. Temporary barricades. No entry zones. Men at work zones. Size: Height 750mm. Medium weight / Heavy Weight.

SpecificationsMade up of Stainless steel 304 grades. Height: 990 mm.Base Diameter: 330 mm. Pole Diameter: 60 mm.Belt Length: up to 2.0 meter.Belt Colour: Red, Blue &Black.

LADY FRISKING CABIN MODEL : SGS-LFC1

PVC TRAFFIC CONE/CROWD MANAGER



13

Water Poison Detection kit

Portable Chemical AnalyzerPortable X-ray Scanning System



?Explosive Detectors?Liquid Explosive Detectors?Non-Liner Junction Detectors (NLJD)?Real Time Viewing Machine (RTVS)?X-ray Baggage Scanner?Wire and Cable Locator?Radiation Detectors?Bomb Disposal Suit?Multi Zone Door Frame Metal Detector?Portable Jammer?Mine Detectors

We also deals in latest International Security BDDS instruments/devices.

?RSP Tool Kit

?CROT (Car Remote Opening Tool Kit)

?Finger Print Kit

?Explosive Detection kit

?Prodder Metallic/Non-Metallic

?Hook And Line Set

?Thermal Cutter

?Remote Wire Cutter

?Blasting Machine

Endogenous manufactured Devices and Equipments

Maintenance/service for all types of equipments and devices

is also undertaken.

Maintenance/service for all types of equipments and devices

is also undertaken.

14

door frame metal detectorweight : 270 g (with batteries) buzzer, vibration, on, metal, detection,...

Documents