door edges & astragals without cutouts e 1...standard material: 20 gauge crs or 20 gauge...
TRANSCRIPT
E
9702 NEWTON AV S, BLOOMINGTON MN 55431 © 2019 Activar Construction Products Group, Inc.
Distributor: Project:
Contractor: Approved By:
Date: | Quantity: Architect:
Project: Attach Templates for Specials:
800-554-6077 [email protected] [email protected] [email protected] ALPD1901 VISIT WWW.ACTIVARCPG.COM FOR THE MOST UPDATED PRODUCT INFORMATION BEFORE ORDERING ●
Standard Material:
20 gauge CRS or 20 gauge stainless with 18 gauge astra-gals. Maximum length 108”.
Mounting & Fastening:
Countersunk mounting holes. #8 x 7/8” flathead Phillips head screws.
Dimensions: 1-3/4” x 1” for 1-3/4” door.
STEP 1 - SELECT MATERIAL AND FINISH:
Material & Finish:
___ Cold rolled steel with powder coat ___ (S) Stainless steel #304-4
Powder Coat Finishes for CRS and Galvanneal, Check One:
(B) Mineral Bronze is our Standard Color (BK) Black (FB Flat Black (W) White (SB) SC Beige (SI) Silver (G) Gray (S) Sand (BA) Brass (AB) AMS Beige View Color Samples Online (May vary from other Air Louvers Products)
STEP 2 - OPTIONAL FEATURES:
Door: ___ Other door thickness: _____
Width: ___ Optional leg width: ____
Material: ___ (H1) 18 ga (.050) #304 stainless steel—#4 finish ___ (G) Galvanneal sheet with powder coat
Fire-Rated Marking:
____ (WH) Fire-rated up to 90 minutes for wood, composite or steel doors, however only marked upon request.
Fasteners: ___ Torx
Leadlined: ___ Leadlined for x-ray protection
STEP 3 - ENTER SIZES
Length: ___ Overall Length of door edge
SPECIFICATIONS:
DOOR EDGES & ASTRAGALS WITHOUT CUTOUTS
EDGES WITH 90° ANGLE- 1” X 1-3/4” ID FOR 1-3/4” DOOR
1
EDGE - FLAT BAR ASTRAGAL 1/8” X 2” ROUND EDGE
EDGES WITH BEVELED ANGLE- 1” X 1-3/4” ID
EDGES FOR DOUBLE EGRESS DOORS - 1” X 1-3/4” ID
DL9 DL9A
DL8
DL5A
DL8AR DL8ARR
DL3A
DL7 DL7AR DL7ALR DL7AL DL7ARR
DL2A
DL5
DL4
DA
STEP 4 - SELECT PROFILE FOR THE DOOR EDGES
For Most Door Edges, We Can Generate an Exact Drawing of Your Order for Your Approval!
Standard Profile is 1” x 1-3/4”ID
1 ¾” ID
1”
E2
9702 NEWTON AV S, BLOOMINGTON MN 55431 © 2019 Activar Construction Products Group, Inc.
Distributor: Project:
Contractor: Approved By:
Date: | Quantity: Architect:
Project: Attach Templates for Specials:
800-554-6077 [email protected] [email protected] [email protected] ALPD1901 VISIT WWW.ACTIVARCPG.COM FOR THE MOST UPDATED PRODUCT INFORMATION BEFORE ORDERING ●
Standard Material:
20 gauge CRS or 20 gauge stainless with 18 gauge astra-gals. Maximum length 108”.
Mounting & Fastening:
Countersunk mounting holes. #8 x 7/8” flathead Phillips head screws.
Dimensions: 1-3/4” x 1” for 1-3/4” door.
STEP 1 - SELECT MATERIAL AND FINISH:
Material: ____ Cold rolled steel with powder coat ____ (S) Stainless steel #304-4
Powder Coat Finishes for CRS and Gal-vanized Check One:
(B) Mineral Bronze is our Standard Color (BK) Black (FB) Flat Black (W) White (SB) SC Beige (SI) Silver (G) Gray (S) Sand (BA) Brass (AB) AMS Beige View Color Samples Online (May vary from other Air Louvers Products)
STEP 2 - OPTIONAL FEATURES:
Door: ___ Optional door thickness: _______
Width: ___ Optional leg width: _____
Material: ___ (H1) 18 ga (.050) #304 stainless steel—#4 finish ___ (G) Galvanneal sheet with powder coat
Fire-Rated Marking:
____ (WH) Fire-rated up to 90 minutes for wood, composite or steel doors, however only marked upon request.
Fasteners: ___ Torx
Leadlined: ___ Leadlined for x-ray protection
STEP 3 - ENTER SIZES:
Length: ___ Overall Length of Door Edge Set
DOOR EDGE & ASTRAGAL PAIRS WITH CUTOUTS
STEP 4 SELECT ONE OF THE FOLLOWING:
Left Hand Active
↑ Key Side ↑
Left Hand Active
Right Hand Active
↑ Key Side ↑
Left Hand Reverse Active
↑ Key Side ↑
Right Hand Reverse Active
↑ Key Side ↑
SPECIFICATIONS
STEP 5 - COMPLETE CUTOUTS PAGE FROM E3, E4, E5 OR E6, AND ATTACH TO THIS SHEET. ATTACH CUSTOM TEMPLATE IF NEEDED.
Attach page E3 with Detail of Cutouts
Attach page E4 with Detail of Cutouts
Attach page E5 with Detail of Cutouts
Attach page E6 with Detail of Cutouts
For Most Door Edges, We Can Generate an Exact Drawing for Your Approval!
Standard Profile is 1” x 1-3/4”ID
1 ¾” ID
1”
E3
9702 NEWTON AV S, BLOOMINGTON MN 55431 © 2019 Activar Construction Products Group, Inc.
Distributor: Project:
Contractor: Approved By:
Date: | Quantity: Architect:
Project: Attach Templates for Specials:
800-554-6077 [email protected] [email protected] [email protected] ALPD1901 VISIT WWW.ACTIVARCPG.COM FOR THE MOST UPDATED PRODUCT INFORMATION BEFORE ORDERING ●
DOOR EDGE & ASTRAGAL PAIRS WITH CUTOUTS LEFT HAND ACTIVE
Dimensions other than the standard selections or with a Template # noted on this page require a template attachment
Left Hand Active
↑ Key Side ↑
Left Center Cutout
Right Bottom Cutout
Right Center Cutout
Right Top Cutout
Notes: ________________________
______________________________
______________________________
______________________________
______________________________
STEP 5 - COMPLETE THIS CUTOUT PAGE AND ATTACH TO PAGE E2
DL9AL DL9L
DL8L DL8AL
DL7L DL7AL
E4
9702 NEWTON AV S, BLOOMINGTON MN 55431 © 2019 Activar Construction Products Group, Inc.
Distributor: Project:
Contractor: Approved By:
Date: | Quantity: Architect:
Project: Attach Templates for Specials:
800-554-6077 [email protected] [email protected] [email protected] ALPD1901 VISIT WWW.ACTIVARCPG.COM FOR THE MOST UPDATED PRODUCT INFORMATION BEFORE ORDERING ●
DOOR EDGE & ASTRAGAL PAIRS WITH CUTOUTS RIGHT HAND ACTIVE
Right Hand Active
↑ Key Side ↑
Right Center Cutout
Left Bottom Cutout
Left Center Cutout
Left Top Cutout
Notes: ________________________
______________________________
______________________________
______________________________
______________________________
STEP 5 - COMPLETE THIS CUTOUT PAGE AND ATTACH TO PAGE E2
DL9R
DL8R
DL7R DL7AR
DL9AR
90° 90°
Dimensions other than the standard selections or with a Template # noted on this page require a template attachment
DL8AR
E5
9702 NEWTON AV S, BLOOMINGTON MN 55431 © 2019 Activar Construction Products Group, Inc.
Distributor: Project:
Contractor: Approved By:
Date: | Quantity: Architect:
Project: Attach Templates for Specials:
800-554-6077 [email protected] [email protected] [email protected] ALPD1901 VISIT WWW.ACTIVARCPG.COM FOR THE MOST UPDATED PRODUCT INFORMATION BEFORE ORDERING ●
DOOR EDGE & ASTRAGAL PAIRS WITH CUTOUTS LEFT HAND REV ACTIVE
Right Bottom Cutout
Left Hand Reverse Active
↑ Key Side ↑
Left Center Cutout
Right Center Cutout
Right Top Cutout
AS
TR
AG
AL
Notes: ________________________
______________________________
______________________________
______________________________
______________________________
STEP 5 - COMPLETE THIS CUTOUT PAGE AND ATTACH TO PAGE E2
DL9ALR DL9LR
DL7LR DL7ALR
90° 90°
Dimensions other than the standard selections or with a Template # noted on this page require a template attachment
DL8LR DL8ALR
87° 87°
E6
9702 NEWTON AV S, BLOOMINGTON MN 55431 © 2019 Activar Construction Products Group, Inc.
Distributor: Project:
Contractor: Approved By:
Date: | Quantity: Architect:
Project: Attach Templates for Specials:
800-554-6077 [email protected] [email protected] [email protected] ALPD1901 VISIT WWW.ACTIVARCPG.COM FOR THE MOST UPDATED PRODUCT INFORMATION BEFORE ORDERING ●
DOOR EDGE & ASTRAGAL PAIRS WITH CUTOUTS RIGHT HAND REV ACTIVE
Right Hand Reverse Active
↑ Key Side ↑
Right Center Cutout
STEP 5 - COMPLETE THIS CUTOUT PAGE AND ATTACH TO PAGE E2
Notes: ________________________
______________________________
______________________________
______________________________
______________________________
Left Bottom Cutout
Left Center Cutout
Left Top Cutout
AS
TR
AG
AL
DL9RR DL9ARR
DL7ARR
93° 87°
DL8RR DL8ARR
Dimensions other than the standard selections or with a Template # noted on this page require a template attachment
DL7RR