dominant tm opto technologies spiceled innovating ... · dominant opto technologies drnd-008 issue...
TRANSCRIPT
26/10/2016 V13.01
Features:> High brightness surface mount LED.> Super wide viewing angle of 160°.> Equivalent to 0603 package outline. Copper lead-frame construction.> Qualified according to JEDEC moisture sensitivity Level 2.> Compatible to IR reflow soldering.> Environmental friendly; RoHS compliance.> Compliance to automotive standard; AEC-Q101.> Superior Corrosion Resistant.
SpiceLEDLike spice, its diminutive size is a stark contrast to its standout performance in terms of brightness, durability and reliability. Despite being the smallest in size yet the SpiceLED™ packs a powerful performance and is a highly reliable design device. Its versality enables its application in automotive applicances, key-pad illumination, hand-held devices such as PDAs, notebooks, compact back-lighting applications, consumer appliances, office equipment, audio and video equipment.
DATA SHEET:
SpiceLEDAlInGaP S-Spice : SSx-CLD
© 2005 SpiceLED is a trademark of DOMINANT Opto Technologies.All rights reserved. Product specifications are subject to change without notice.
Applications:> Automotive: interior applications, eg: switches, telematics, climate control system, dashboard, etc.> Consumer Appliances: LCD illumination as in PDAs, LCD TV.> Communication: indicator and backlight in mobilephone.> Display: full color display video notice board.> Industry: white goods (eg: Oven, microwave, etc.).
DOMINANTOpto TechnologiesInnovating Illumination
TM
26/10/2016 V13.02
SSS-CLD-N2P-1
SSS-CLD-P2Q-1
SSR-CLD-PQ1-1
SSA-CLD-P2Q-1
SSO-CLD-P2Q-1
SSO-CLD-QR1-1
SSY-CLD-P2Q-1
SSY-CLD-Q2R-1
SSG-CLD-M2N-1
SSP-CLD-KL1-1
Super Red, 632 nm
Super Red, 632 nm
Red, 625 nm
Amber, 615nm
Orange, 605 nm
Orange, 605 nm
Yellow, 587 nm
Yellow, 587 nm
Green, 570 nm
Pure Green, 560 nm
160
160
160
160
160
160
160
160
160
160
35.5
56.0
45.0
56.0
56.0
71.5
56.0
90.0
22.4
7.2
AlInGaP S-Spice : SSx-CLD
Part OrderingNumber
Color ViewingAngle˚
Luminous Intensity @ 20mA IV (mcd) Appx. 1.1
Optical Characteristics at Tj=25˚C
Min. Typ. Max
56.0
90.0
71.5
90.0
90.0
112.5
90.0
135.0
35.5
11.2
71.5
112.5
90.0
112.5
112.5
140.0
112.5
180.0
45.0
14.0
Typ. (V)Vf @ If = 20mA Appx. 3.1
Electrical Characteristics at Tj=25˚C
Max. (V)Vr @ Ir = 10uA
Min. (V)Part Number
SSx-CLD 2.0 2.4 12
Min. (V)
1.8
DOMINANTOpto TechnologiesInnovating Illumination
TM
26/10/2016 V13.03
AlInGaP S-Spice : SSx-CLD
Electrical Characteristics at Tj=25˚C
DOMINANTOpto TechnologiesInnovating Illumination
TM
Unit
Absolute Maximum RatingsMaximum Value
DC forward current
Peak pulse current; (tp ≤ 10µs, Duty cycle = 0.1)
Reverse voltage
ESD threshold (HBM)
LED junction temperature
Operating temperature
Storage temperature
Power dissipation (at room temperature)
Thermal resistance- Junction / ambient, Rth JA- Junction / solder point, Rth JS(Mounting on FR4 PCB, pad size >= 16 mm2 per pad)
30
250
12
2000
110
-40 … +100
-40 … +100
80
450250
mA
mA
V
V
˚C
˚C
˚C
mW
K/WK/W
26/10/2016 V13.04
AlInGaP S-Spice : SSx-CLDDOMINANTOpto TechnologiesInnovating Illumination
TM
Unit
CharacteristicsValue
Temperature coefficient of IF = 20mA; 0 ˚C <= T <= 85 ˚C
Temperature coefficient of VF (typ)IF = 20mA; 0 ˚C <= T <= 85 ˚C
Temperature coefficient of IV (typ)IF = 20mA; 0 ˚C <= T <= 85 ˚C
nm / K
Symbol
dom (typ)dom (typ)TC 0.04
0.050.070.080.090.100.10
TCV -2.4-3.3-3.2-2.4-3.3-1.2-1.6
mV / K
TCIV-0.55-0.59-0.62-0.65-1.05-1.20-1.20
% / K
SSS-CLDSSR-CLDSSA-CLDSSO-CLDSSY-CLDSSG-CLDSSP-CLD
Part Number
SSS-CLDSSR-CLDSSA-CLDSSO-CLDSSY-CLDSSG-CLDSSP-CLD
SSS-CLDSSR-CLDSSA-CLDSSO-CLDSSY-CLDSSG-CLDSSP-CLD
26/10/2016 V13.05
AlInGaP S-Spice : SSx-CLD
Wavelength Grouping
Wavelength distribution (nm) Appx. 2.2Color
SSS; Super Red
SSR; Red
SSA; Amber
SSO; Orange
SSY; Yellow
SSG; Green
SSP; Pure Green
625 - 640
620 - 630
610 - 621610 - 615615 - 621
600 - 612600 - 603603 - 606606 - 609609 - 612
582 - 594582 - 585585 - 588588 - 591591 - 594
564.5 - 576.5564.5 - 567.5567.5 - 570.5570.5 - 573.5573.5 - 576.5
552.5 - 564.5552.5 - 555.5555.5 - 558.5558.5 - 561.5561.5 - 564.5
Group
Full
Full
Full W X
Full W X Y Z
Full W X Y Z
Full W X Y Z
Full W X Y Z
DOMINANTOpto TechnologiesInnovating Illumination
TM
26/10/2016 V13.06
AlInGaP S-Spice : SSx-CLD
K1K2L1M2N1N2P1P2Q1Q2R1R2
7.20...9.009.00...11.20
11.20...14.0022.40...28.5028.50...35.5035.50...45.0045.00...56.0056.00...71.5071.50...90.0090.00...112.50
112.50...140.00140.00...180.00
Brightness Group Luminous Intensity Appx. 1.1
IV (mcd)
Luminous Intensity Group at Tj=25˚C
DOMINANTOpto TechnologiesInnovating Illumination
TM
Luminous Intensity Group at Tj=25˚CRelative Intensity Vs Forward Current
Forward Current, mA
Rel
ativ
e In
tens
ity
0 10 20 30 40 50 60
0
0.2
0.4
0.6
0.8
1
1.2
1.4
1.6
1.8
2
2.2
Forward Current Vs Forward Voltage
Forward Voltage, V
Forw
ard
Cur
rent
, mA
1.2 1.4 1.6 1.8 2 2.2 2.4
0
5
10
15
20
25
30
35
Maximum Current Vs Ambient Temperature
Ambient Temperature
Forw
ard
Cur
rent
, mA
0 10 20 30 40 50 60 70 80 90 100
0
5
10
15
20
25
30
35
Relative Intensity Vs Wavelength
Wavelength, nm
500 550 600 650 700 750 800
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1
26/10/2016 V13.07
AlInGaP S-Spice : SSx-CLD
Yellow
Pure Green
Rel
ativ
e In
tens
ity
0 o10 o
70 o
60 o
50 o
40 o
30 o 20 o
90 o
80 o
0.6
0.8
1.0
0.2
0.4
0
Radiation Pattern
Green
Orange
Red
Super Red
DOMINANTOpto TechnologiesInnovating Illumination
TM
Multiple X-Y Plot
Col_1
Variables
Col_2
0 10 20 30 40 50 60
0
0.2
0.4
0.6
0.8
1
1.2
1.4
1.6
1.8
2
2.2
SSx-CLD
10
100
1000
0.1 1 10 100
Allo
wab
le F
orw
ard
Cu
rren
t (
mA
)
Duty Ratio, %
Allowable Forward Current Vs Duty Ratio ( Ta=25 Deg C, tp 10uS )Allowable Forward Current Vs Duty Ratio
( Ta=25 Deg C, tp≤10uS )
Allo
wab
le F
orw
ard
Cur
rent
( m
A )
Duty Ratio, %
26/10/2016 V13.08
AlInGaP S-Spice : SSx-CLD
SpiceLEDTM • AlInGaP S-Spice : SSx-CLD Package Outlines
Note: The center pad is a common cathode. Please take care during soldering to avoid shorting.
Material
Material
Lead-frame
Package
Cu Alloy With NiPdAu Plating
High Temperature Resistant Epoxy Resin
Note: product is Pb free
DOMINANTOpto TechnologiesInnovating Illumination
TM
26/10/2016 V13.09
AlInGaP S-Spice : SSx-CLD
Recommended Solder Pad
Note: Component is based on a new package platform, which features “Bottom Only Terminations“. Solder joints are only formedat the bottom of the component and solder fillet will not be observable as the sides of the component.
Surface are not intended for soldering
DOMINANTOpto TechnologiesInnovating Illumination
TM
26/10/2016 V13.010
Taping and orientation
• Reels come in quantity of 3000 units.• Reel diameter is 180 mm.
AlInGaP S-Spice : SSx-CLDDOMINANTOpto TechnologiesInnovating Illumination
TM
26/10/2016 V13.011
Packaging Specification
AlInGaP S-Spice : SSx-CLDDOMINANTOpto TechnologiesInnovating Illumination
TM
26/10/2016 V13.012
AlInGaP S-Spice : SSx-CLDDOMINANTOpto TechnologiesInnovating Illumination
TM
Packaging Specification
Average 1pc SpiceLED 1 completed bag (3000pcs)
0.034 190 ± 10Weight (gram)
CardboardBox
Dimensions (mm) Empty BoxWeight (kg)
Super Small
Small
Medium
Large
For SpiceLED
Reel / BoxCardboard BoxSize
Weight (gram) 0.001 140 ± 10
DOMINANT TM
Moisture sensitivity level
Moisture absorbent material +Moisture indicator
The reel, moisture absorbent material and moisture indicator aresealed inside the moisture proof foil bag
Reel
Barcode label
Label
(L) Lot No : lotno
(P) Part No : partno
(C) Cust No : partno
(G) Grouping : group
(Q) Quantity : quantity
(D) D/C : date code
(S) S/N : serial no
DOMINANT Opto TechnologiesML TEMP2 260˚CRoHS Compliant
Made in Malaysia
DOMINANT Opto Technologies DRND-008
Issue No : 1 Page 1 of 3
Product & Process Change Notice (PCN)
PCN No: D140157 Date: 21-Nov -2014
1. Describe present process / product:
All SMD LEDs that are currently shipped in the reel form. Please refer to section 3 for
the details; comparing current packing and label specification versus change proposed.
2. Product type affected:
All SMD LEDs that are currently shipped in the reel form.
3. Describe changes (to be):
Existing barcode printed label (BPL) used is as shown below.
Existing BPL size - 87mm x 45mm. As part of improvement and also in response to customers’ request; BPL format will be
changed to the following.
New BPL size - 110mm x 55mm. Additional information are now included in the label. 2D and 3D barcode data are
implemented now for every data field.
325 x 225 x 190
325 x 225 x 280
570 x 440 x 230
570 x 440 x 460
0.38
0.54
1.46
1.92
9 reels MAX
15 reels MAX
60 reels MAX
120 reels MAX
26/10/2016 V13.013
Time (sec)0 50 100 150 200
300
250
225
200
175
150
125
100
75
50
25
275
Tem
pera
ture
(˚C
)
Classification Reflow Profile (JEDEC J-STD-020C)
Ramp-up3˚C/sec max.
255-260˚C10-30s
60-150s
Ramp-down
6˚C/secmax.
Preheat 60-180s
480s max
217˚C
Recommended Pb-free Soldering Profile
AlInGaP S-Spice : SSx-CLDDOMINANTOpto TechnologiesInnovating Illumination
TM
26/10/2016 V13.014
AlInGaP S-Spice : SSx-CLDDOMINANTOpto TechnologiesInnovating Illumination
TM
Appendix
1) Brightness:1.1 Luminous intensity is measured with an internal reproducibility of ± 8 % and an expanded uncertainty of ± 11 % (according to GUM with a coverage factor of k=3).1.2 Luminous flux is measured with an internal reproducibility of ± 8 % and an expanded uncertainty of ± 11 % (according to GUM with a coverage factor of k=3).
2) Color:2.1 Chromaticity coordinate groups are measured with an internal reproducibility of ± 0.005 and an expanded uncertainty of ± 0.01 (accordingly to GUM with a coverage factor of k=3).2.2 DOMINANT wavelength is measured with an internal reproducibility of ± 0.5nm and an expanded uncertainty of ± 1nm (accordingly to GUM with a coverage factor of k=3).
3) Voltage:3.1 Forward Voltage, Vf is measured with an internal reproducibility of ± 0.05V and an expanded uncertainty of ± 0.1V (accordingly to GUM with a coverage factor of k=3).
Revision History
NOTE
All the information contained in this document is considered to be reliable at the time of publishing. However, DOMINANT
Opto Technologies does not assume any liability arising out of the application or use of any product described herein.
DOMINANT Opto Technologies reserves the right to make changes to any products in order to improve reliability, function
or design.
DOMINANT Opto Technologies products are not authorized for use as critical components in life support devices or systems
without the express written approval from the Managing Director of DOMINANT Opto Technologies.
Page
-
-
2
2 2
4
7, 10
7
1, 12
1, 10, 14
Subjects
New Format
Update Company Name
Add new partno: SSA-CLD-P2Q-1
Add new partno: SSS-CLD-P2Q-1
Add new partno: SSY-CLD-Q2R-1
Add Characteristics
Update graph: Relative Intensity Vs Forward CurrentUpdate Carrier Tape
Add Graph: Allowable Forward Current Vs Duty Ratio
Add FeaturesUpdate Package Specification
Add FeaturesError on Taping and Orientation
Add Appendix
Date of Modification
09 Jun 2009
11 Mar 2010
05 May 2010
21 Oct 2010
25 Jan 2011
10 Dec 2013
14 Feb 2014
02 Apr 2015
26 Oct 2015
26 Oct 2016
AlInGaP S-Spice : SSx-CLD
26/10/2016 V13.015
DOMINANTOpto TechnologiesInnovating Illumination
TM
AlInGaP S-Spice : SSx-CLD
About Us
DOMINANT Opto Technologies is a dynamic company that is amongst the world’s leading automotive LED manu-facturers. With an extensive industry experience and relentless pursuit of innovation, DOMINANT’s state-of-art manufacturing and development capabilities have become a trusted and reliable brand across the globe. More in-formation about DOMINANT Opto Technologies, a ISO/TS 16949 and ISO 14001 certified company, can be found under http://www.dominant-semi.com.
DOMINANTOpto TechnologiesInnovating Illumination
TM
Please contact us for more information:
DOMINANT Opto Technologies Sdn. Bhd.Lot 6, Batu Berendam, FTZ Phase III, 75350 Melaka, MalaysiaTel: (606) 283 3566 Fax: (606) 283 0566E-mail: [email protected]