volume 21 - adventech 4x4

P/N SMA-01

WURTON15 Edelman | Irvine, CA 92618

Ph. 949-753-6006 | Fx. 949-753-0968www.WURTON.com

VIAIR CORPORATION15 Edelman | Irvine, CA 92618Ph. 949-585-0011 | Fx. 949-585-0188www.VIAIRCORP.com

VOLUME 21

AIR COMPRESSORS, PNEUMATIC SYSTEMS OFF ROAD LED LIGHTING & ACCESSORIES

W

VIAIR HEADQUARTERSIRVINE, CA

Cover Photo Credit: Texas Car Spotter PhotographyOwner: Frank Gonzalaz

Air Source Kits

Portable Compressors

Dual PacksIG-Compressors

Onboard Air Systems

2on2 Bolt-On Platforms

Pneumatic Accessories

LED Lighting AccessoriesWURTON LED Lighting

Contents

Industrial Grade kit compressors for industrial applications. IG Series compressors come with mounting hardware, remote mount air intake filter components. IG Series compressors must be used with a relay, pressure switch and air tank.

Six different Dual Packs are available in multiple configurations capable of 150 or 200 PSI and offer an assortment of speed and duty cycle ratings. Most Dual Packs come with relays and a pressure switch to simplify installation.

OBA systems are a complete kit of parts, based on tire size, used to accomplish various tasks for off road vehicles. OBA Systems are tailored for specific uses including air locking differentials, tire inflation, air tool use, air horn operation and more.

Typically used for air supply to air horns and other applications, ASKs provide a simple and effective solution with a smaller tank, available in three pressure ratings and two tank sizes. ASKs are pre-assembled for ease of installation.

Two VIAIR compressors mounted to a two gallon air tank provide compressed air for many situations. 2on2s are available as model-specific (with mounting bracket) or in universal applications that include a wiring harness for ease of installation.

A full line of portable compressors, based on tire size allow inflation of virtually any size tire without installation. Due to duty cycle restrictions, always select the portable compressor rated for the size of tire that you intend to inflate.

To make the installation of pneumatic systems as simple as possible, VIAIR offers a full line of air accessories, air filters, air gauges, air hoses, air tanks, leader hoses, tire inflation guns & kits, fittings and electrical accessories.

C-CompressorsAvailable in various sizes in five series for various applications. Most compressors come with a leader hose, mounting hardware and remote mount air filter. Often integrated into onboard air systems; cannot be used without a pressure switch, relay and air tank.

5 H-CompressorsStand-alone units meant to be used with an open-ended air hose for filling tires. H-model compressors have a built-in, environmentally-sealed ON/OFF switch and a dedicated quick connect stud for simple attachment to an open-ended air hose.

11

13 15

19 25

27 ADA SystemsAutomatic Deployment Air Systems provide a compact air locker and tire fill station for virtually any vehicle. All ADA Systems come complete with a wiring harness.

29

31 37

43 50Available exclusively from VIAIR, WURTON is the leading manufacturer of high performance LED lighting products, which are built for the most demanding consumers in the Off Road & Industrial markets.

A complete line of wiring, installation, mounting options, and replacement parts are included to complete the offerings of WURTON High Performance LED Lighting Products, available exclusively from VIAIR Corporation.

CompetitiveSales Advantage:- Nationally-Supported Advertising Campaign.- Training Videos for Sales & Phone-Room Staff.- Sales & Marketing Aides for Stocking Dealers.- Live Customer Service and Tech Support Available During All Business Hours.- Live Chat Feature Available at viaircorp.com During Business Hours. - All Orders Shipped within 48 Hours.- 1 Year Manufacturer’s Defect Warranty.

Stay Connected:

VIAIR Corporation is a world-class manufacturer of Fractional HP, Direct Driven, DC air compressors intended for a wide cross section of mobile pneumatic uses as well as a multitude of various industrial applications. VIAIR has been producing compressors and other pneumatic control devices since 1998, and its products are currently being used throughout the world, in the most extreme environments. VIAIR is recognized by its customers and peers alike as the leading manufacturer of high performance oil-less 12- and 24-volt DC air compressors.

VIAIR’s mission is to consistently deliver performance, reliability and value to our customers; while providing the ultimate Vital Air Source – the heart of any pneumatic system to our valued partners, worldwide. VIAIR’s experience in building high performance compressors that stand the test of time is unparalleled.

About Us:

THE LEADER IN RENEWABLE AIR SOURCEAIR SUSPENSION • AGRICULTURE • INDUSTRIALMEDICAL • OFF ROAD • MINING • EMERGENCY RESPONSE

About this catalog:VIAIR Corporation strives to provide the most complete and up to date product information available, the product information and photographs are presumed accurate at the time of printing. VIAIR Corporation reserves the right to make changes to the content contained in this catalog without notice and is not responsible for technical and/or print errors.

DUTY CYCLE REFERENCE CHART

Duty Cycle: 100 PSI @ 72° F Max. Run Time / Min. Rest Time

9% Duty Cycle 5 Min. On / 55 Min. Off








100% Duty Cycle 1 Hour Run Time

* Duty Cycle at 200PSI and 72°F.

Please Note: All compressors, regardless of rated duty cycle, require sufficient rest time in between cycles to allow for partial or complete heat dissipation. Heat dissipation rates may vary depending on ambient temperatures and operating conditions.

Standard Compressor Features:

- IP 53 to 67 Rated- Gearless, direct-drive permanent magnetic motors- 12-volt and 24-volt DC motors- Oil-less design requires no maintenance (besides periodic filter inspection/replacement)- High performance and highly reinforced PTFE piston ring- Anodized piston cylinder for increased wear protection- Precision, high speed, durable bearings for increased piston & motor life- Sealed motor housing for moisture & dust resistance- Environmental seals where electrical connections enter motor housing- Efficient, oversized heat sink head assembly for increased heat dissipation, duty cycle & performance- High performance check valve to eliminate restart pressure on head and piston- Direct or remote mount option intake air filter assembly- Replacement air filter elements (filtration to 15 microns)- Stainless steel braided leader hose (PTFE lined where applicable)- Heavy duty mounting feet (omega and standard style brackets, as applicable)- Reinforced vibration isolators for safe & quiet operation- Mounting hardware (bolts, washers, locking washers, nuts)- Thermal overload protection to protect compressor in event of overheating/over duty cycle operation (where applicable)- Maximum operating temperature of 158° F Minimum operating temperature of -40°F (unless otherwise noted)- Wire terminal ends to simplify installation (ring ground terminal, spade positive lead terminal)

All VIAIR compressors are tested at an ambient temperature of 72 degrees Fahrenheit, with a supply voltage of 13.8 volts for 12-volt models & 28 volts for 24-volt models. It is recommended that you always operate VIAIR compressors with charging voltage or maintain recommended supply voltage for optimal performance.

Standard Specification Testing:

Products protected by:

U.S. Pat. No. D,470,509; U.S. Pat. No. D,520,025;U.S. Pat. No. D,529,051; U.S. Pat. No. D,534,925; U.S. Pat. No. D,601,591; U.S. Pat. No. 6,279,599; U.S. Pat. No. 6,716,003 and/or U.S. Pat. No. 7,001,156 & several patents pending

COMPRESSOR APPLICATION GUIDE

Compressor Series Duty Cycle Working Pressure Moisture &

Dust ResistantMax.

Tank SizeRecommended

Pressure Switch P/N's

090C Series092C Series095C Series

9%9%9%

120 PSI120 PSI120 PSI

Yes / IP54----

Yes / IP541.0 Gallon

90100, 90101, 90110, 9011390100, 90101, 90110, 9011390100, 90101, 90110, 90113

097C Series098C Series

10%10%

130 PSI130 PSI

Yes / IP54Yes / IP54

1.0 Gallon90100, 90101, 90110, 9011390100, 90101, 90110, 90113

100C Series 15% 130 PSI Yes / IP54 1.0 Gallon 90100, 90101, 90110, 90113 3

250C IG Series 100% 150 PSI Yes / IP67 2.5 Gallon90100, 90101, 90102, 90110, 90111,

90113, 90217, 90223, 90227

275C Series 25% 150 PSI Yes / IP54 2.5 Gallon90100, 90101, 90102, 90110, 90111,

90113, 90217, 90223, 90227


90113, 90217, 90223, 90227


90113, 90217, 90223, 90227

330C IG Series 100% 150 PSI Yes / IP67 5.0 Gallon90100, 90101, 90102, 90110, 90111,

90113, 90217, 90223, 90227


90113, 90217, 90223, 90227

380C Series 100% *55%

200 PSI Yes / IP67 5.0 Gallon ALL VIAIR Pressure Switch P/N's


90113, 90217, 90223, 90227


90113, 90217, 90223, 90227

444C Series 100% *50%


450C Series450C IG Series 100% 150 PSI Yes / IP67 5.0 Gallon

90100, 90101, 90102, 90110, 90111, 90113, 90217, 90223, 90227


90113, 90217, 90223, 90227

480C Series 100% *50%


* Duty cycle refers to the amount of time a compressor can be operated in a given time period, at 100 PSI, and a standard ambient temperature of 72° F. Duty cycle is commonly expressed in percentage format as: Compressor on time ÷ (on time + off time) = Duty Cycle %.

3 4

WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.

Specifications:- 12-Volt- Duty Cycle: 9% @ 100 PSI- Max. Working Pressure: 120 PSI- Max. Tank Size: 1.0 Gallon- Dimensions: 7.6"L x 2.0 "W x 4.6"H- Net Weight: 2.45 lbs.

Specifications:- 12-Volt or 24-Volt- Duty Cycle: 9% @ 100 PSI- Max. Working Pressure: 120 PSI- Max. Tank Size: 1.0 Gallon- Dimensions: 5.4"L x 3.1"W x 4.6"H- Net Weight: 2.5 lbs.

Specifications:- 12-Volt- Duty Cycle: 9% @ 100 PSI- Max. Working Pressure: 120 PSI- Max. Tank Size: 1.0 Gallon- Dimensions: 5.9"L x 2.1"W x 4.5"H- Net Weight: 2.4 lbs.

97C130 PSI / 1.53 CFM 12V / 1.27 CFM 24V

P/N 00097 - 12VP/N 02497 - 24V

Tank Fill Rates

0.5 Gallon Tank 90C, 92C, 95C 95C-24V

0 to 105 PSI 1 min. 08 sec. (+05 sec.) 1 min. 05 sec. (+05 sec.)

85 to 105 PSI 16 sec. (+03 sec.) 15 sec. (+03 sec.)



1.0 Gallon Tank 90C, 92C, 95C 95C-24V





Tank Fill Rates

0.5 Gallon Tank 97C 97C-24V





1.0 Gallon Tank 97C 97C-24V





Specifications:- 12-Volt or 24-Volt- Duty Cycle: 10% @ 100 PSI- Max. Working Pressure: 130 PSI- Max. Tank Size: 1.0 Gallon- Dimensions: 5.6"L x 2.2"W x 4.4"H- Net Weight: 2.25 lbs.

9OC

P/N 00090

120 PSI / 1.03 CFM

92C

P/N 00092

120 PSI / 1.03 CFM

95C

P/N 00095 - 12VP/N 02495 - 24V

120 PSI / 1.03 CFM 12V / 1.03 CFM 24V

Performance Data: 90C, 92C, 95C

PSI CFM A BAR LPM A

0 1.03 7 0 29.0 7

40 0.60 9 3 16.5 9

90 0.43 10 6 12.5 10

120 0.34 9 8 10.0 9

Performance Data: 95C-24V

PSI CFM A BAR LPM A

0 1.03 4 0 29.0 4

40 0.60 5 3 16.5 5

90 0.43 5 6 12.5 5

120 0.34 5 8 10.0 5

Performance Data: 97C

PSI CFM A BAR LPM A

0 1.53 7 0 31.1 8

40 0.83 11 3 22.7 11

90 0.54 12 6 16.3 12

130 0.35 11 9 10.0 11


PSI CFM A BAR LPM A

0 1.27 4 0 36.0 4

40 0.90 6 3 24.7 6

90 0.56 7 6 17.0 7

130 0.31 6 9 8.7 6

BUILT STRONGTO WORK HARD...SO YOU DON’T HAVE TO.

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

12V Max. Amp Draw: 10 Amps24V Max. Amp Draw: 5 Amps


Max. Amp Draw: 10 Amps Max. Amp Draw: 10 Amps

* Omega Bracket

Recommended Components: Tank - P/N 91005, 91014; Relays - P/N's; 93940 (12v), 93943 (24v); Pressure Switches - P/N's; 90100, 90101, 90223

Recommended Components: Tank - P/N 91005, 91014; Relays - P/N's; 93940 (12v), 93943 (24v); Pressure Switches - P/N's; 90100, 90101, 90223

6

* Due to redundant restrictions added to apparatus, for flow rate testing, actual flow rate at 0 psi may vary.

* *

* * * *

Recommended Components: Tank - P/N 91005, 91014; Relays - P/N's; 93940 (12v); Pressure Switches - P/N's; 90100, 90101, 90223

Recommended Components: Tank - P/N's; 91005, 91014; Relays - P/N 93940 (12v); Pressure Switches - P/N's; 90100, 90101, 90110, 90113

Recommended Components: Tank - P/N's; 91005, 91014; Relays - P/N 93940 (12v); Pressure Switches - P/N's; 90100, 90101, 90110, 90113;Leader Hose - P/N's: 92801, 92807

Recommended Components: Tank - P/N's; 91005, 91014; Relays - P/N 93940 (12v); Pressure Switches - P/N's; 90100, 90101, 90110, 90113;Leader Hose - P/N's: 92801, 92807

Recommended Components: Tank - P/N's; 91005, 91014, 91022, 91025; Relays - P/N 93940 (12v); Pressure Switches -P/N's; 90100, 90101, 90102, 90110, 90111, 90113, 90217, 90223, 90227

Recommended Components: Tank - P/N's; 91005, 91014, 91022, 91025; Relays - P/N 93940 (12v); Pressure Switches - P/N's; 90100, 90101, 90102, 90110, 90111, 90113, 90217, 90223, 90227

Recommended Components: Tank - P/N's; 91005, 91014, 91022, 91025, 91050; Relays - P/N's; 93940 (12v), 93943 (24v); Pressure Switches - P/N's; 90100, 90102, 90110, 90111, 90217, 90223, 90227;Leader Hose - P/N 92793 ( For P/N 32534 )

WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.

Specifications:- 12-Volt or 24-Volt- Duty Cycle: 33% @ 100 PSI- Max. Working Pressure: 150 PSI- Max. Tank Size: 5.0 Gallon- Dimensions: 8"L x 4"W x 6.75"H- Net Weight: 7.5 lbs.


1OOC

P/N 10010

130 PSI / 1.27 CFM

Specifications:- 12-Volt- Duty Cycle: 15% @ 100 PSI- Max. Working Pressure: 130 PSI- Max. Tank Size: 1.0 Gallon- Dimensions: 6.35"L x 3.3"W x 4.9"H - Net Weight: 3.55 lbs.

* No leader hose or check valve * Omega Bracket * No leader hose or check valve1OOC

Specifications:- 12-Volt- Duty Cycle: 33% @ 100 PSI- Max. Working Pressure: 150 PSI- Max. Tank Size: 5.0 Gallon- Dimensions: 8"L x 4"W x 6.75"H- Net Weight: 7.5 lbs.

325C1OOC

P/N 10016

130 PSI / 1.27 CFM

Tank Fill Rates

0.5 Gallon Tank Fill Rate

0 to 105 PSI 50 sec. (+05 sec.)

85 to 105 PSI 10 sec. (+03 sec.)

0 to 120 PSI 1 min. 00 sec. (+05 sec.)

90 to 120 PSI 17 sec. (+03 sec.)


0 to 105 PSI 1 min. 40 sec. (+10 sec.)

85 to 105 PSI 25 sec. (+05 sec.)

0 to 120 PSI 2 min. 00 sec. (+10 sec.)

90 to 120 PSI 35 sec. (+05 sec.)


PSI CFM A BAR LPM A

0 1.27 9 0 36.0 9

40 0.76 12 3 21.0 12

90 0.59 12 6 17.0 12

130 0.45 12 9 12.3 12

Tank Fill Rates


0 to 105 PSI 50 sec. (+05 sec.)

85 to 105 PSI 10 sec. (+03 sec.)

0 to 120 PSI 1 min. 00 sec. (+05 sec.)

90 to 120 PSI 17 sec. (+03 sec.)


0 to 105 PSI 1 min. 40 sec. (+10 sec.)

85 to 105 PSI 25 sec. (+05 sec.)

0 to 120 PSI 2 min. 00 sec. (+10 sec.)

90 to 120 PSI 35 sec. (+05 sec.)

Tank Fill Rates


0 to 105 PSI 50 sec. (+05 sec.)

85 to 105 PSI 10 sec. (+03 sec.)

0 to 120 PSI 1 min. 00 sec. (+05 sec.)

90 to 120 PSI 17 sec. (+03 sec.)


0 to 105 PSI 1 min. 40 sec. (+10 sec.)

85 to 105 PSI 25 sec. (+05 sec.)

0 to 120 PSI 2 min. 00 sec. (+10 sec.)

90 to 120 PSI 35 sec. (+05 sec.)


28OC

P/N 28021

150 PSI / 1.59 CFM

Tank Fill Rates


0 to 105 PSI 1 min. 10 sec. (+05 sec.)

85 to 105 PSI 20 sec. (+03 sec.)

0 to 145 PSI 1 min. 40 sec. (+05 sec.)

110 to 145 PSI 30 sec. (+03 sec.)


0 to 105 PSI 2 min. 35 sec. (+10 sec.)

85 to 105 PSI 44 sec. (+05 sec.)

0 to 145 PSI 4 min. 30 sec. (+10 sec.)

110 to 145 PSI 1 min. 36 sec. (+05 sec.)


PSI CFM A BAR LPM A

0 1.59 10 0 45.0 10

40 1.04 15 3 29.0 15

90 0.76 17 6 22.0 17

150 0.51 17 10 15.3 17

275C150 PSI / 2.03 CFM

P/N 27520


Tank Fill Rates


0 to 105 PSI 1 min. 05 sec. (+05 sec.)

85 to 105 PSI 14 sec. (+03 sec.)

0 to 145 PSI 1 min. 45 sec. (+05 sec.)

110 to 145 PSI 30 sec. (+03 sec.)


0 to 105 PSI 2 min. 45 sec. (+10 sec.)

85 to 105 PSI 40 sec. (+05 sec.)

0 to 145 PSI 4 min. 30 sec. (+10 sec.)

110 to 145 PSI 1 min. 35 sec. (+05 sec.)


PSI CFM A BAR LPM A

0 2.03 10 0 57.5 10

40 1.01 15 3 28.5 16

90 0.79 17 6 22.5 17

150 0.57 17 10 17.0 17

Tank Fill Rates

2.5 Gallon Tank 12-Volt 24-Volt











PSI CFM A BAR LPM A

0 1.59 14 0 45.0 14

40 1.17 18 3 32.3 18

90 0.82 21 6 23.7 21

150 0.57 21 10 16.5 21


PSI CFM A BAR LPM A

0 1.80 7 0 51.0 7

40 1.31 10 3 36.5 10

90 1.04 11 6 30.0 11

150 0.78 12 10 22.5 12

325C150 PSI / 1.59 CFM 12V / 1.80 CFM 24V

Tank Fill Rates


0 to 105 PSI 50 sec. (+05 sec.)

85 to 105 PSI 15 sec. (+03 sec.)

0 to 120 PSI 1 min. 05 sec. (+05 sec.)

90 to 120 PSI 21 sec. (+03 sec.)


0 to 105 PSI 1 min. 40 sec. (+10 sec.)

85 to 105 PSI 30 sec. (+05 sec.)

0 to 120 PSI 2 min. 10 sec. (+10 sec.)

90 to 120 PSI 45 sec. (+05 sec.)


PSI CFM A BAR LPM A

0 1.53 7 0 43.5 7

40 0.83 11 3 22.7 11

90 0.54 12 6 16.3 12

130 0.35 11 9 10.0 11

98C

P/N 00098

130 PSI / 1.53 CFM



Max. Amp Draw: 14 AmpsP/N 10014

130 PSI / 1.27 CFMMax. Amp Draw: 14 Amps

Max. Amp Draw: 12 Amps Max. Amp Draw: 14 Amps Max. Amp Draw: 18 Amps Max. Amp Draw: 19 Amps

P/N 32534 - 12V - Silver


P/N 32530 - 12V - SilverP/N 32533 - 12V - ChromeP/N 32538 - 24V - Silver

* Omega Bracket



PSI CFM A BAR LPM A

0 1.27 9 0 36.0 9

40 0.76 12 3 21.0 12

90 0.59 12 6 17.0 12

130 0.45 12 9 12.3 12


PSI CFM A BAR LPM A

0 1.27 9 0 36.0 9

40 0.76 12 3 21.0 12

90 0.59 12 6 17.0 12

130 0.45 12 9 12.3 12

7 8


* *

* *

* *

* * *

Recommended Components: Tank - P/N's; 91005, 91014, 91022, 91025, 91050; Relays - P/N 93940 (12v),93980 (12v-80A); Pressure Switches - P/N's; 90100, 90101, 90102, 90110, 90111, 90217, 90223, 90227

Recommended Components: Tank - P/N's; 91005, 91014, 91022, 91025, 91028, 91050; Relays - P/N 93940 (12v), 93980 (12v-80A); Pressure Switches - All P/N's

Recommended Components: Tank - P/N's; 91005, 91014, 91022, 91025, 91050; Relays - P/N's; 93940 (12v), 93980 (12v-80A); Pressure Switches - P/N's; 90100, 90101, 90102, 90110, 90111, 90217, 90223, 90227




Recommended Components: Tank - P/N's; 91005, 91014, 91022, 91025, 91050; Relays - P/N 93940 (12v), 93980 (12v-80A); Pressure Switches - All P/N's


Tank Fill Rates


0 to 105 PSI 1 min. 27 sec. (+05 sec.)

85 to 105 PSI 21 sec. (+03 sec.)

0 to 145 PSI 2 min. 20 sec. (+05 sec.)

110 to 145 PSI 48 sec. (+03 sec.)


0 to 105 PSI 2 min. 55 sec. (+10 sec.)

85 to 105 PSI 45 sec. (+05 sec.)

0 to 145 PSI 4 min. 50 sec. (+10 sec.)

110 to 145 PSI 1 min. 40 sec. (+05 sec.)

Tank Fill Rates


0 to 145 PSI 2 min. 50 sec. (+10 sec.)

110 to 145 PSI 57 sec. (+05 sec.)

0 to 200 PSI 5 min. 02 sec. (+10 sec.)

165 to 200 PSI 1 min. 30 sec. (+05 sec.)


0 to 145 PSI 6 min. 02 sec. (+10 sec.)

110 to 145 PSI 1 min. 55 sec. (+05 sec.)

0 to 200 PSI 10 min. 30 sec. (+15 sec.)

165 to 200 PSI 3 min. 10 sec. (+10 sec.)

Tank Fill Rates


0 to 105 PSI 1 min. 27 sec. (+05 sec.)

85 to 105 PSI 21 sec. (+03 sec.)

0 to 145 PSI 2 min. 20 sec. (+05 sec.)

110 to 145 PSI 48 sec. (+03 sec.)


0 to 105 PSI 2 min. 55 sec. (+10 sec.)

85 to 105 PSI 45 sec. (+05 sec.)

0 to 145 PSI 4 min. 50 sec. (+10 sec.)

110 to 145 PSI 1 min. 40 sec. (+05 sec.)

35OC150 PSI / 1.52 CFM


Specifications:- 12-Volt- Duty Cycle: 100% @ 100 PSI 50% @ 200 PSI- Max. Working Pressure: 200 PSI- Max. Tank Size: 5.0 Gallon- Dimensions: 10.87"L x 4.2"W x 6.75"H- Net Weight: 11.05 lbs.


45OC150 PSI / 1.80 CFM

P/N 45040

Specifications:- 12-Volt- Duty Cycle: 100% @ 100 PSI- Max. Working Pressure: 150 PSI- Max. Tank Size: 5.0 Gallon- Dimensions: 10.6"L x 4"W x 6.87"H- Net Weight: 10.8 lbs.

Specifications:- 12-Volt- Duty Cycle: 100% @ 100 PSI 55% @ 200 PSI- Max. Working Pressure: 200 PSI- Max. Tank Size: 5.0 Gallon- Dimensions: 9"L x 4"W x 6.75"H- Net Weight: 8.75 lbs.

38OC

P/N 38033

200 PSI / 1.58 CFM

46OC

P/N 46043

150 PSI / 1.80 CFM


4OOC 48OC

P/N 48043

200 PSI / 1.86 CFM

Specifications:- 12-Volt- Duty Cycle: 33% @ 100 PSI- Max. Working Pressure: 150 PSI- Max. Tank Size: 5.0 Gallon- Dimensions: 10"L x 4.3"W x 6.5"H- Net Weight: 9.0 lbs.

42OC

P/N 42042

150 PSI / 2.95 CFM

Tank Fill Rates


0 to 145 PSI 3 min. 30 sec. (+10 sec.)

110 to 145 PSI 1 min. 10 sec. (+05 sec.)

0 to 200 PSI 6 min. 05 sec. (+10 sec.)

165 to 200 PSI 1 min. 40 sec. (+05 sec.)


0 to 145 PSI 7 min. 20 sec. (+10 sec.)

110 to 145 PSI 2 min. 25 sec. (+05 sec.)

0 to 200 PSI 13 min. 00 sec. (+15 sec.)

165 to 200 PSI 3 min. 39 sec. (+10 sec.)


PSI CFM A BAR LPM A

0 1.58 12 0 44.7 12

40 1.09 16 3 30.6 16

90 0.88 19 6 25.3 19

150 0.67 20 10 19.5 21

200 0.49 18 14 13.5 18

Tank Fill Rates


0 to 105 PSI 1 min. 55 sec. (+10 sec.)

85 to 105 PSI 28 sec. (±05 sec.)

0 to 145 PSI 3 min. 02 sec. (+10 sec.)

110 to 145 PSI 59 sec. (+05 sec.)


0 to 105 PSI 4 min. 00 sec. (+10 sec.)

85 to 105 PSI 58 sec. (+05 sec.)

0 to 145 PSI 6 min. 25 sec. (+15 sec.)

110 to 145 PSI 2 min. 11 sec. (+10 sec.)


PSI CFM A BAR LPM A

0 1.80 12 0 51.0 12

40 1.39 18 3 38.2 18

90 0.97 21 6 28.1 21

150 0.72 20 10 21.0 21

Tank Fill Rates


0 to 105 PSI 1 min. 55 sec. (+10 sec.)

85 to 105 PSI 28 sec. (+05 sec.)

0 to 145 PSI 3 min. 02 sec. (+10 sec.)

110 to 145 PSI 59 sec. (+05 sec.)


0 to 105 PSI 4 min. 00 sec. (+10 sec.)

85 to 105 PSI 58 sec. (+05 sec.)

0 to 145 PSI 6 min. 25 sec. (+15 sec.)

110 to 145 PSI 2 min. 11 sec. (+10 sec.)


PSI CFM A BAR LPM A

0 1.80 13 0 51.0 12

40 1.39 19 3 38.2 19

90 0.97 22 6 28.1 22

150 0.72 22 10 21.0 22


PSI CFM A BAR LPM A

0 2.62 15 0 74.0 16

40 2.01 24 3 56..0 25

90 1.52 27 6 46.0 28

150 1.01 26 10 31.0 27


PSI CFM A BAR LPM A

0 1.86 10 0 52.7 10

40 1.45 16 3 40.7 16

90 1.13 19 6 32.6 19

150 0.75 21 10 22.3 21

200 0.51 19 14 14.0 19

Tank Fill Rates


0 to 105 PSI 2 min. 55 sec. (+10 sec.)

85 to 105 PSI 45 sec. (+05 sec.)

0 to 145 PSI 4 min. 20 sec. (+10 sec.)

110 to 145 PSI 1 min. 35 sec. (+05 sec.)


0 to 105 PSI 5 min. 20 sec. (+10 sec.)

85 to 105 PSI 1 min. 30 sec. (+05 sec.)

0 to 145 PSI 8 min. 50 sec. (+15 sec.)

110 to 145 PSI 3 min. 15 sec. (+10 sec.)


PSI CFM A BAR LPM A

0 1.52 12 0 43.0 12

40 0.99 17 3 27.6 17

90 0.79 19 6 23.0 19

150 0.54 19 10 16.0 19

P/N 35030 - SilverP/N 35033 - Chrome

Max. Amp Draw: 23 Amps

Max. Amp Draw: 24 AmpsMax. Amp Draw: 23 AmpsMax. Amp Draw: 20 Amps





PSI CFM A BAR LPM A

0 2.95 16 0 85.0 15

40 2.03 25 3 58.0 25

90 1.47 28 6 44.0 28

150 0.95 27 10 31.0 27

9 10


* *

* *

* *

*

WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.Air

LockersAir

ToolsAir

BagsAir

HornsAir

TanksLoad

LevelersTire

InflationAir

LockersAir

ToolsAir

BagsAir

HornsAir

TanksLoad

LevelersTire

Inflation

Specifications:- 12-Volt- Duty Cycle: 33% @ 100 PSI- Max. Working Pressure: 150 PSI- Ingress Protection Rating: IP54- Dimensions: 11.25"L x 4"W x 6.75"H- Net Weight: 8.95 lbs.

Features: - Check Valve - Vibration Isolators - Mounting Hardware - 1/4" Quick Connect Stud - 1/4" Stainless Steel Braided Leader Hose - Air Line for Remote Mount Air Filter - Remote Mount Air Filter Assembly - (2) Replacement Air Filter Elements - Installation Instructions

Specifications:- 12-Volt- Duty Cycle: 100% @ 100 PSI- Max. Working Pressure: 150 PSI- Ingress Protection Rating: IP54- Dimensions: 12"L x 4"W x 6.75"H- Net Weight: 11.05 lbs.

Features: - Check Valve - Vibration Isolators - Mounting Hardware - 1/4" Quick Connect Stud - 1/4" Stainless Steel Braided Leader Hose - Air Line for Remote Mount Air Filter - Remote Mount Air Filter Assembly - (2) Replacement Air Filter Elements - Installation Instructions

4OOH

P/N 40042

150 PSI / 2.30 CFM

45OH

P/N 45042

150 PSI / 1.80 CFM

Tire Fill Rates

31" x 10.5" Fill Rate

0 to 30 PSI 3 min. 00 sec. (+10 sec.)

15 to 30 PSI 1 min. 35 sec. (+05 sec.)


0 to 30 PSI 4 min. 20 sec. (+10 sec.)

15 to 30 PSI 2 min. 05 sec. (+05 sec.)


0 to 30 PSI 5 min. 20 sec. (+15 sec.)

15 to 30 PSI 2 min. 45 sec. (+10 sec.)

Tire Fill Rates


0 to 30 PSI 5 min. 30 sec. (+10 sec.)

15 to 30 PSI 2 min. 50 sec. (+05 sec.)


0 to 30 PSI 6 min. 55 sec. (+15 sec.)

15 to 30 PSI 3 min. 30 sec. (+10 sec.)


0 to 30 PSI 7 min. 56 sec. (+15 sec.)

15 to 30 PSI 4 min. 09 sec. (+10 sec.)

35"FOR UP TO

TIRES

37"FOR UP TO

TIRES



Recommended Components: Air Hose - P/N's; 00025, 00027, 00029

Recommended Components: Air Hose - P/N's; 00025, 00027, 00029

WHEREVER IT IS YOU GO...WE’LL HELP YOU GET THERE.

Performance Data

PSI CFM A BAR LPM A

0 2.30 17 0 65.1 17

40 1.75 24 3 48.5 24

90 1.28 28 6 37.0 28

150 0.71 27 10 22.1 27

Performance Data

PSI CFM A BAR LPM A

0 1.80 12 0 51.0 12

40 1.39 18 3 38.2 18

90 0.97 21 6 28.1 21

150 0.72 20 10 21.0 21

12


*

*


AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

ONE LESS THINGTO WORRY ABOUT...WHEN YOU’RE OUT IN THE FIELD.

Specifications:- 12-Volt or 24-Volt- Permanent Magnetic Motor- Duty Cycle: 100% @ 100 PSI- Max. Working Pressure: 150 PSI- Max. Tank Size: 5.0 Gallon- Dimensions: 9"L x 4"W x 6.75"H- Net Weight: 8.25 lbs.

Specifications:- 12-Volt or 24-Volt- Permanent Magnetic Motor- Duty Cycle: 100% @ 100 PSI- Max. Working Pressure: 150 PSI- Max. Tank Size: 5.0 Gallon- Dimensions: 11.25"L x 4"W x 6.75"H- Net Weight: 10.4 lbs.

33OC-IG150 PSI / 1.06 CFM 12V / 1.16 CFM 24V

P/N 33050 - 12V P/N 33058 - 24V


P/N 45050 - 12V P/N 45058 - 24V

Specifications:- 12-Volt or 24-Volt- Permanent Magnetic Motor- Duty Cycle: 100% @ 100 PSI- Max. Working Pressure: 150 PSI- Max. Tank Size: 2.5 Gallon- Dimensions: 7.4"L x 3.9"W x 6.75"H- Net Weight: 6.75 lbs.

Tank Fill Rates











Tank Fill Rates





110 to 145 PSI 1 min. 05 sec. (+05 sec.) 55 sec. (+05 sec.)



85 to 105 PSI 1 min. 05 sec. (+05 sec.) 1 min. 00 sec. +05 sec.)



Tank Fill Rates











Performance Data: 250C-IG-12V

PSI CFM A BAR LPM A

0 0.88 6 0 25.0 6

40 0.67 9 3 19.0 9

90 0.49 10 6 14.2 11

150 0.29 10 10 8.7 11


PSI CFM A BAR LPM A

0 1.00 3 0 28.3 3

40 0.71 4 3 19.7 4

90 0.51 5 6 14.6 5

150 0.29 5 10 8.8 5


PSI CFM A BAR LPM A

0 1.06 7 0 30.0 7

40 0.76 10 3 21.1 10

90 0.62 12 6 17.7 12

150 0.44 15 10 13.0 16


PSI CFM A BAR LPM A

0 1.16 4 0 33.0 4

40 0.81 6 3 22.6 6

90 0.66 7 6 19.0 7

150 0.46 8 10 13.5 8


PSI CFM A BAR LPM A

0 1.80 12 0 51.0 12

40 1.39 18 3 38.2 18

90 0.97 21 6 28.1 21

150 0.72 21 10 21.0 21


PSI CFM A BAR LPM A

0 2.20 8 0 62.3 8

40 1.69 11 3 47.0 11

90 1.31 12 6 37.7 12

150 0.88 12 10 26.0 12




P/N 25050 - 12V P/N 25058 - 24V


14

* *

* *

* *


Specifications:- 12-Volt- Duty Cycle: 30% @ 100 PSI- Max. Working Pressure: 150 PSI- 12V Max. Amp Draw: 33 Amps- Max. Tank Size: 5.0 Gallon- Dimensions (Each Unit): 7.8"L x 3.95"W x 6.35"H - Net Weight: 13.9 lbs.

Features: - (2) 280C Black on Silver Compressors with 1/4" Stainless Steel Braided Leader Hoses w/ Inline Check Valves- (2) Air Filter Assemblies- (2) Remote Mount Brackets- (2) Sets of Remote Mount Fittings- (2) Sets of Spare Air Filter Elements- (2) Leader Hose Clips- (6) Air Line Clips with Included Hardware- (2) Heavy Duty 40-Amp Relays - (1) One Heavy Duty Pressure Switch (110 PSI on, 145 PSI off)

Performance Data

PSI CFM A BAR LPM A

0 2.96 21 0 84.0 21

40 2.27 29 3 62.5 30

90 1.62 32 6 47.0 32

150 1.16 32 10 33.5 42

28OC Dual PerformanceValue Pack150 PSI / 2.96 CFM

P/N 28002 Black on Silver


* / * ** * *

Tank Fill Rates


0 to 145 PSI 1 min. 34 sec. (+ 10 sec.)

110 to 145 PSI 29 sec. (+ 05 sec.)


0 to 145 PSI 1 min. 44 sec. (+ 10 sec.)

110 to 145 PSI 31 sec. (+ 05 sec.)


0 to 145 PSI 3 min. 54 sec. (+ 15 sec.)

110 to 145 PSI 1 min. 11 sec. (+ 10 sec.)

WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.Air

LockersAir

ToolsAir

BagsAir

HornsAir

TanksLoad

LevelersTire

InflationAir

LockersAir

ToolsAir

BagsAir

HornsAir

TanksLoad

LevelersTire

Inflation

DON’T JUST GETTHEIR ATTENTION...EARN THEIR ADMIRATION.

Specifications:- 12-Volt- Duty Cycle: 100% @ 100 PSI 55% @ 200 PSI- Max. Working Pressure: 200 PSI- 12V Max. Amp Draw: 44 Amps- Max. Tank Size: 10.0 Gallon- Dimensions (Each Unit): 9"L x 4"W x 6.75"H - Net Weight: 17.5 lbs.

Features: - (2) 380C Compressors (Pewter, Chrome or Stealth Black) with 1/4" Stainless Steel Braided Leader Hoses or Black Sleeved Stainless Steel Braided Leader Hoses w/ Inline Check Valves- (2) Air Filter Assemblies- (2) Remote Mount Brackets- (2) Sets of Remote Mount Fittings- (2) Sets of Spare Air Filter Elements- (2) Leader Hose Clips- (6) Air Line Clips with Included Hardware- (2) Heavy Duty 40-Amp Relays - (1) One Heavy Duty Pressure Switch (165 PSI on, 200 PSI off)- Air Line (For Remote Mount Filter Installation)- (8) Sets of Nuts, Bolts, Washers and Lock Washers

Performance Data

PSI CFM A BAR LPM A

0 2.54 28 0 72.0 28

40 2.07 34 3 57.5 34

90 1.61 39 6 46.4 39

150 1.19 42 10 34.5 42

200 0.86 37 14 23.7 37


P/N 38002 - PewterP/N 38003 - ChromeP/N 38036 - Stealth Black


P/N 38003

P/N 38002

Fill Rates


0 to 200 PSI 3 min. 13 sec. (+10 sec.)

165 to 200 PSI 53 sec. (+05 sec.)


0 to 200 PSI 7 min. 11 sec. (+15 sec.)

165 to 200 PSI 2 min. 06 sec. (+10 sec.)

P/N 38036

NEW

16 * Due to redundant restrictions added to apparatus, for flow rate testing, actual flow rate at 0 psi may vary.

* / * *

* * Combined CFM * * * Combined Max Amp Draw

* * *

P/N 45013

P/N 48032

P/N 48012

P/N 45012

P/N 48042

P/N 44442


Performance Data:

PSI CFM A BAR LPM A

0 3.53 25 0 100.0 25

40 2.75 35 3 76.8 35

90 2.12 41 6 61.2 41

150 1.38 42 10 40.6 43

200 0.90 36 14 24.8 36

Specifications:- 12-Volt- Duty Cycle: 100% @ 100 PSI 50% @ 200 PSI- Max. Working Pressure: 200 PSI- 12V Max. Amp Draw: 44 Amps- Max. Tank Size: 10.0 Gallon- Dimensions (Each Unit): 10.87"L x 4.2"W x 6.75"H- Net Weight: 22.1 lbs.

Features: - (2) 480C Compressors (Pewter, Chrome or Stealth Black) with 3/8" Stainless Steel Braided Leader Hoses or Black Sleeved Stainless Steel Braided Leader Hoses w/ Inline Check Valves- (2) Air Filter Assemblies- (2) Remote Mount Brackets- (2) Sets of Remote Mount Fittings- (2) Sets of Spare Air Filter Elements- (2) Leader Hose Clips- (6) Air Line Clips with Included Hardware- (8) Sets of Nuts, Bolts, Washers, and Lock Washers- (1) Heavy Duty 60-amp Rated Fuse Holder- (2) Heavy Duty 40-Amp Relays - (1) One Heavy Duty Pressure Switch (165 PSI on, 200 PSI off)- Air Line (For Remote Mount Filter Installation)

48OC Dual PerformanceValue Pack200 PSI / 3.53 CFM Max. Amp Draw: 44 AmpsP/N 48012 - PewterP/N 48032 - ChromeP/N 48042 - Stealth Black

Specifications:- 12-Volt- Duty Cycle: 100% @ 100 PSI- Max. Working Pressure: 150 PSI- 12V Max. Amp Draw: 44 Amps- Max. Tank Size: 10.0 Gallon- Dimensions (Each Unit): 10.6"L x 4"W x 6.87"H- Net Weight: 21.6 lbs.

Features: - (2) 450C (Chrome or Silver) Compressors with 1/4" Stainless Steel Braided Leader Hoses- (2) Air Filter Assemblies- (2) Remote Mount Brackets- (2) Sets of Remote Mount Fittings- (2) Sets of Spare Air Filter Elements- (2) Leader Hose Clips- (6) Air Line Clips with Included Hardware- (8) Sets of Nuts, Bolts, Washers and Lock Washers- (2) Heavy Duty 40-Amp Relays - (1) One Heavy Duty Pressure Switch (110 PSI on, 145 PSI off)- Air Line (For Remote Mount Filter Installation)

Performance Data

PSI CFM A BAR LPM A

0 3.28 28 0 93.0 28

40 2.54 36 3 71.0 37

90 1.94 43 6 56.0 42

150 1.27 41 10 37.5 41


P/N 45012 - SilverP/N 45013 - Chrome


Specifications:- 12-Volt- Duty Cycle: 100% @ 100 PSI 50% @ 200 PSI- Max. Working Pressure: 200 PSI- 12V Max. Amp Draw: 40 Amps- Max. Tank Size: 10.0 Gallon- Dimensions (Each Unit): 10.87"L x 4.2"W x 7.06"H- Net Weight: 21.6 lbs.

Features: - (2) 444C Compressors (Chrome or Stealth Black) with 1/4" Stainless Steel Braided Leader Hoses or Black Sleeved Stainless Steel Braided Leader Hoses w/ Inline Check Valves- Intercooler Head (Patents Pending)- (2) Air Filter Assemblies- (2) Remote Mount Brackets- (2) Sets of Remote Mount Fittings- (2) Sets of Spare Air Filter Elements- (6) Air Line Clips with Included Hardware- (8) Sets of Nuts, Bolts, Washers, and Lock Washers


444C Dual PerformanceValue Pack200 PSI / 3.53 CFM

P/N 44432 - ChromeP/N 44442 - Stealth Black

Performance Data

PSI CFM A BAR LPM A

0 3.53 25 0 100.0 25

40 2.72 34 3 75.6 34

90 2.03 39 6 59.0 39

150 1.32 38 10 38.8 38

200 0.85 33 14 23.8 33

Fill Rates


0 to 200 PSI 2 min. 30 sec. (+10 sec.)

165 to 200 PSI 46 sec. (+05 sec.)


0 to 200 PSI 5 min. 30 sec. (+10 sec.)

165 to 200 PSI 1 min. 35 sec. (+05 sec.)

Fill Rates


0 to 145 PSI 1 min. 13 sec. (+05 sec.)

110 to 145 PSI 23 sec. (+03 sec.)


0 to 145 PSI 1 min. 30 sec. (+05 sec.)

110 to 145 PSI 31 sec. (+03 sec.)


0 to 145 PSI 3 min. 10 sec. (+10 sec.)

110 to 145 PSI 1 min. 05 sec. (+05 sec.)

Fill Rates


0 to 200 PSI 2 min. 22 sec. (+10 sec.)

165 to 200 PSI 38 sec. (+05 sec.)


0 to 200 PSI 5 min. 02 sec. (+10 sec.)

165 to 200 PSI 1 min. 25 sec. (+05 sec.)


0 to 200 PSI 10 min. 30 sec. (+15 sec.)

165 to 200 PSI 3 min. 10 sec. (+10 sec.)

P/N 40013

Specifications:- 12-Volt- Duty Cycle: 33% @ 100 PSI- Max. Working Pressure: 150 PSI- 12V Max. Amp Draw: 60 Amps- Max. Tank Size: 10.0 Gallon- Dimensions (Each Unit): 9"L x 4"W x 6.75"H- Net Weight: 17.3 lbs.

Features: - (2) 400C Compressors (Chrome or Stealth Black) with 1/4" Stainless Steel Braided Leader Hoses or Black Sleeved Stainless Steel Braided Leader Hoses w/ Inline Check Valves- (2) Air Filter Assemblies- (2) Remote Mount Brackets- (2) Sets of Remote Mount Fittings- (2) Sets of Spare Air Filter Elements- (2) Leader Hose Clips- (6) Air Line Clips with Included Hardware- (2) Heavy Duty 40-Amp Relays - (1) One Heavy Duty Pressure Switch (110 PSI on, 145 PSI off)- Air Line (For Remote Mount Filter Installation)- (8) Sets of Nuts, Bolts, Washers and Lock Washers

Performance Data

PSI CFM A BAR LPM A

0 4.55 39 0 129.0 39

40 3.50 46 3 96.6 47

90 2.46 59 6 70.8 58

150 1.48 49 10 43.7 50

4OOC Dual PerformanceValue Pack150 PSI / 4.55 CFM

P/N 40013 - ChromeP/N 40048 - Stealth Black


Fill Rates


0 to 145 PSI 1 min. 00 sec. (+05 sec.)

110 to 145 PSI 20 sec. (+03 sec.)


0 to 145 PSI 1 min. 15 sec. (+05 sec.)

110 to 145 PSI 25 sec. (+03 sec.)


0 to 145 PSI 2 min. 30 sec. (+10 sec.)

110 to 145 PSI 52 sec. (+05 sec.)

P/N 40048

NEW

17 18

* / * *

* / * *

* / * *

* * *

* * *

* * *

* Due to redundant restrictions added to apparatus, for flow rate testing, actual flow rate at 0 psi may vary. * * Combined CFM * * * Combined Max Amp Draw

* / * ** * *

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation


Features:- 2.5 Gallon VIAIR Air Tank (150 PSI)- 325C VIAIR Compressor with 1/4" Stainless Steel Braided Leader Hose- 1/4" NPT Quick Connect Coupler (M) - Dash Panel Gauge w/ ON/OFF Switch- Pressure Switch w/ Relay (110 PSI on, 145 PSI off)

Features:- 1.0 Gallon VIAIR Air Tank (105 PSI) - 98C VIAIR Compressor with 1/4" Stainless Steel Braided Leader Hose- 1/4" Male NPT Plug- 1/4" NPT compression fitting- (2) T-Fittings- 40-Amp Relay- Omega Bracket w/ Mounting Hardware

33"FOR UP TO

TIRES33% DUTY@ 100 PSI

Fill Rates


0 to 145 PSI 4 min. 15 sec. (+10 sec.)

110 to 145 PSI 1 min. 25 sec. (+05 sec.)


0 to 30 PSI 4 min. 40 sec. (+10 sec.)

15 to 30 PSI 2 min. 30 sec. (+05 sec.)


0 to 30 PSI 6 min. 40 sec. (+15 sec.)

15 to 30 PSI 3 min. 20 sec. (+10 sec.)

Performance Data

PSI CFM A BAR LPM A

0 1.59 14 0 45.0 14

40 1.17 18 3 32.3 18

90 0.82 21 6 23.7 21

150 0.57 21 10 16.5 21

Fill Rates


0 to 105 PSI 1 min. 40 sec. (+10 sec.)

85 to 105 PSI 30 sec. (+10 sec.)

Performance Data

PSI CFM A BAR LPM A

0 1.53 7 0 43.5 7

40 0.83 11 3 22.7 11

90 0.54 12 6 16.3 12

110 0.44 12 7 13.7 12

Features:- 2.5 Gallon VIAIR Air Tank (150 PSI)- 400C VIAIR Compressor with 1/4" Stainless Steel Braided Leader Hose- 35ft. Coil Hose w/ Tire Chuck - 1/4" NPT Quick Connect Stud (F)- 1/4" NPT Quick Connect Coupler (F) - Dash Panel Gauge w/ ON/OFF Switch- Pressure Switch with Relay (110 PSI on, 145 PSI off)- Accessory Airline

Features:- 2.0 Gallon VIAIR Air Tank (120 PSI)- 275C VIAIR Compressor with 1/4" Stainless Steel Braided Leader Hose- Accessory Airline- 40-Amp Relay- Pressure Switch (90 PSI on, 120 PSI off)

35"FOR UP TO


Performance Data

PSI CFM A BAR LPM A

0 2.62 15 0 74.0 17

40 2.01 24 3 56.0 25

90 1.52 27 6 46.0 28

150 1.01 26 10 31.0 27

Fill Rates


0 to 145 PSI 2 min. 20 sec. (+05 sec.)

110 to 145 PSI 48 sec. (+03 sec.)


0 to 30 PSI 4 min. 20 sec. (+10 sec.)

15 to 30 PSI 2 min. 05 sec. (+05 sec.)


0 to 30 PSI 5 min. 20 sec. (+15 sec.)

15 to 30 PSI 2 min. 45 sec. (+10 sec.)

Performance Data

PSI CFM A BAR LPM A

0 2.03 10 0 57.5 10

40 1.01 15 3 28.5 16

90 0.79 17 6 22.5 17

120 0.69 18 8 20.0 18

Fill Rates


0 to 120 PSI 2 min. 22 sec. (+05 sec.)

90 to 120 PSI 46 sec. (+05 sec.)

Recommended Components: Pressure Regulator - P/N 90150Mounting Bracket - P/N 95900Tire Inflation Kits - P/N's; 00043, 00044

Recommended Components: Pressure Regulator - P/N 90150

Recommended Components: Pressure Regulator - P/N 90150Mounting Bracket - P/N 95900Tire Inflation Kits - P/N's; 00043, 00044

Recommended Components: Pressure Regulator - P/N 90150

Ultra-Light Duty

P/N 10000Max. Amp Draw: 12 Amps105 PSI / 1.53 CFM

- Reducer 1/8" NPT (F) to 1/4" NPT (M)- 1/4" NPT 175 PSI Safety Valve- 1/4" NPT Drain Cock- 4" Strip of Grommet Material- 20ft. 12-Gauge Wire w/ Inline Fuse Holder- Electrical Connections- Accessory Airline- Permanent Magnetic Motor

- Accessory Airline- Pressure Switch (85 PSI on, 105 PSI off)- (2) 1/4" (M) NPT to 1/8" (F) BSP- 1/4" NPT 145 PSI Safety Valve- 1/4" NPT Drain Cock- 20ft. 16-Gauge Wire w/ Inline Fuse Holder- Electrical Connections- Permanent Magnetic Motor

- Reducer 1/8" NPT (F) to 1/4" NPT (M)- 1/4" NPT 175 PSI Safety Valve- 1/4" NPT Drain Cock- (3) 1/4" NPT Compression Fittings - 4" Strip of Grommet Material- 20ft. 12-Gauge Wire w/ Inline Fuse Holder- Electrical Connections- Permanent Magnetic Motor

- 1/4" NPT 145 PSI Safety Valve- 1/4" NPT Drain Cock- 1/4" NPT Compression Fitting - 20ft. 16-Gauge Wire w/ Inline Fuse Holder- Electrical Connections- Permanent Magnetic Motor

P/N 10005

150 PSI / 2.62 CFM

Heavy DutyMax. Amp Draw: 28 Amps

P/N 10002

120 PSI / 2.03 CFM

Quarter DutyMax. Amp Draw: 18 Amps

YOU CAN GO WHERETHE PATH LEADS...OR MAKE YOUR OWN TRAIL.

* ALL OBAs are for 12-Volt Systems only.

FOR AIR HORNS

& AIR LOCKERS10% DUTY@ 100 PSI

FOR AIR HORNS

& AIR LOCKERS25% DUTY@ 100 PSI

Medium Duty


RV Tire Fill Rates

275/80r22.5 Fill Rate

80 to 90 PSI 30 sec.

90 to 110 PSI 3 min. 50 sec.

110 to 130 PSI 4 min. 37 sec.

Features:- 2.5 Gallon VIAIR Air Tank (150 PSI)- 450C VIAIR Compressor with 1/4" Stainless Steel Braided Leader Hose- 35ft. Coil Hose w/ Tire Chuck- Dash Panel Gauge w/ ON/OFF Switch- Pressure Switch w/ Relay (110 PSI on, 145 PSI off)- Reducer: 1/8" NPT (F) to 1/4" NPT (M)- 1/4" NPT Quick Connect Stud (F) - 1/4" NPT Quick Connect Coupler (F) - 1/4" NPT 175 PSI Safety Valve

- 1/4" NPT Drain Cock- (3) 1/4" NPT Compression Fittings - 4" Strip of Grommet Material- 20ft. 12-Gauge Wire w/ Inline Fuse Holder- Accessory Airline- Electrical Connections- Permanent Magnetic Motor

Performance Data

PSI CFM A BAR LPM A

0 1.80 12 0 51.0 12

40 1.39 18 3 38.2 18

90 0.97 21 6 28.1 21

150 0.72 20 10 21.0 21

Fill Rates


0 to 145 PSI 3 min. 02 sec. (+10 sec.)

110 to 145 PSI 59 sec. (+05 sec.)


0 to 30 PSI 6 min. 55 sec. (+15 sec.)

15 to 30 PSI 3 min. 30 sec. (+10 sec.)


0 to 30 PSI 7 min. 56 sec. (+15 sec.)

15 to 30 PSI 4 min. 09 sec. (+10 sec.)

Recommended Components: Pressure Regulator - P/N 90150Mounting Bracket - P/N 95900Tire Inflation Kits - P/N's 00043, 00044

Constant Duty


37"FOR UP TO


RV Tire Fill Rates


80 to 90 PSI 49 sec.

90 to 110 PSI 5 min. 07 sec.

110 to 130 PSI 6 min. 19 sec.

19 20 * Due to redundant restrictions added to apparatus, for flow rate testing, actual flow rate at 0 psi may vary.

*

*

*

*

*

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation


Features:- 2.5 Gallon VIAIR Air Tank (200 PSI)- 480C Chrome VIAIR Compressor with 1/4" Stainless Steel Braided Leader Hoses- Tire Inflation Gun w/ 200 PSI Gauge- 30ft. Coil Hose w/ Quick Connects- 1/4" NPT Quick Connect Stud (F)- 1/4" NPT Quick Connect Coupler (F) - Dash Panel Gauge w/ ON/OFF Switch- Sealed Pressure Switch (165 PSI on, 200 PSI off)

- Reducer 1/8" NPT (F) to 1/4" NPT (M)- Reducer 3/8" NPT (F) to 1/4" NPT (M)- 1/4" NPT 250 PSI Safety Valve- 1/4" NPT Drain Cock- (3) 1/4" NPT Compression Fittings - 4" Strip of Grommet Material- 20ft. 12-Gauge Wire w/ Inline Fuse Holder- Electrical Connections- Permanent Magnetic Motor- Accessory Airline

37"FOR UP TO


Performance Data

PSI CFM A BAR LPM A

0 1.86 10 0 52.7 10

40 1.45 16 3 40.7 16

90 1.13 19 6 32.6 19

150 0.75 21 10 22.3 21

200 0.51 19 14 14.0 19

Recommended Components: Pressure Regulator - P/N 90150Mounting Bracket - P/N 95900

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

Features:- 2.0 Gallon VIAIR Air Tank (150 PSI)- (2) 350C VIAIR Compressors with 1/4" Stainless Steel Braided Leader Hose- 30 ft. Coil Hose w/ Quick Connects- 1/4" NPT Quick Connect Coupler (F)- Tire Inflation Gun w/ 200 PSI Gauge- 0-220 PSI Pressure Regulator- 1/4" NPT Quick Connect Stud (F) - Dash Panel Gauge with ON/OFF Switch- Blow Gun Air Tool - Sealed Pressure Switch (110 PSI on, 145 PSI off)

- (2) 40-amp Relays - 1/4" NPT 175 PSI Safety Valve- 1/4" NPT Drain Cock- (2) 1/8" BSP to 1/4" NPT (Air Locker Use)- (4) 1/4" NPT Compression Fittings- 20 ft. 12-Gauge Wire w/ Inline Fuse Holder w/ Fuse- (2) T-Fittings (1/4" M x 1/4" F x 1/8" F) - 4" Strip of Grommet Material- Electrical Connections- Accessory Airline- Permanent Magnetic Motor

X’treme Duty


Recommended Components:Mounting Bracket - P/N 95900

P/N 20001

200 PSI / 1.86 CFM

Ultra DutyMax. Amp Draw: 23 Amps

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

Features:- 2.0 Gallon VIAIR Air Tank (150 PSI)- (2) 325C VIAIR Compressors with 1/4" Stainless Steel Braided Leader Hoses- 30ft. Coil Hose w/ Quick Connects- Tire Inflation Gun w/ 200 PSI Gauge- Dash Panel Gauge w/ ON/OFF Switch- 0-220 PSI Pressure Regulator- Blow Gun Air Tool- Sealed Pressure Switch (110 PSI on, 145 PSI off)- (2) 40-amp Relays

- (2) T-Fittings- 1/4" NPT Quick Connect Stud (F)- 1/4" NPT Quick Connect Coupler (F) - 1/4" NPT 175 PSI Safety Valve- 1/4" NPT Drain Cock- (2) 1/8" BSP to 1/4" NPT - (4) 1/4" NPT Compression Fittings - 4" Strip of Grommet Material- 20ft. 12-Gauge Wire w/ Inline Fuse Holder- Accessory Airline- Electrical Connections- Permanent Magnetic Motor

35"FOR UP TO


Performance Data

PSI CFM A BAR LPM A

0 3.21 21 0 91.0 22

40 2.30 32 3 64.0 33

90 1.85 36 6 53.0 36

150 1.45 37 10 42.0 37

Fill Rates


0 to 145 PSI 1 min. 26 sec. (+05 sec.)

110 to 145 PSI 25 sec. (+03 sec.)


0 to 30 PSI 3 min. 40 sec. (+10 sec.)

15 to 30 PSI 1 min. 50 sec. (+05 sec.)


0 to 30 PSI 4 min. 36 sec. (+10 sec.)

15 to 30 PSI 2 min. 20 sec. (+05 sec.)Recommended Components: Mounting Bracket - P/N 95900


150 PSI / 3.21 CFM

Super Duty

37"FOR UP TO


Performance Data

PSI CFM A BAR LPM A

0 2.68 23 0 76.0 23

40 1.98 33 3 55.0 34

90 1.56 36 6 45.5 37

150 1.06 37 10 31.5 37

Fill Rates


0 to 145 PSI 1 min. 40 sec. (+05 sec.)

110 to 145 PSI 32 sec. (+03 sec.)


0 to 30 PSI 4 min. 40 sec. (+10 sec.)

15 to 30 PSI 2 min. 20 sec. (+05 sec.)


0 to 30 PSI 5 min. 00 sec. (+15 sec.)

15 to 30 PSI 2 min. 40 sec. (+10 sec.)

Fill Rates


0 to 200 PSI 5 min. 02 sec. (+10 sec.)

110 to 145 PSI 1 min. 30 sec. (+05 sec.)


0 to 30 PSI 6 min. 15 sec. (+15 sec.)

15 to 30 PSI 3 min. 15 sec. (+10 sec.)


0 to 30 PSI 7 min. 00 sec. (+15 sec.)

15 to 30 PSI 3 min. 40 sec. (+10 sec.)

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

Features:- 2.5 Gallon VIAIR Air Tank (150 PSI)- (2) 280C VIAIR Compressors with 1/4" Stainless Steel Braided Leader Hoses- 30ft. Coil Hose w/ Quick Connects- Tire Inflation Gun w/ 200 PSI Gauge- 0-220 PSI Pressure Regulator- Sealed Pressure Switch (110 PSI on, 145 PSI off)- 150 PSI Illuminated Dash Panel Gauge- (2) 40-amp Relays- 1/4" Quick Connect Coupler (M)

- 1/4" 175 PSI Safety Valve- 1/4" Drain Cock- (4) 1/4" Compression Fittings - Inline Fuse Holder- 6-Port Billet Manifold w/ Mounting Bracket (1/4" NPT)- (2) 15ft. 1/4" Air Line Included- 5 pc. 1/4" NPT Plugs Kit- (2) 1/8" BSP to 1/4" NPT (Air Locker Use)- Electrical Connections- Permanent Magnetic Motor

Performance Data

PSI CFM A BAR LPM A

0 2.96 21 0 84.0 21

40 2.27 29 3 62.5 30

90 1.62 32 6 47.0 32

150 1.16 32 10 33.5 32

Fill Rates


0 to 145 PSI 1 min. 44 sec. (+10 sec.)

110 to 145 PSI 36 sec. (+05 sec.)


0 to 30 PSI 4 min. 10 sec. (+15 sec.)

15 to 30 PSI 1 min. 50 sec. (+10 sec.)


0 to 30 PSI 5 min. 02 sec. (+15 sec.)

15 to 30 PSI 2 min. 15 sec. (+10 sec.)Recommended Components:Mounting Bracket - P/N 95900

Dual 28OCOBA System


30% DUTY@ 100 PSI

Wiring harness NOT included.

*35"

FOR UP TO

TIRESNEW DROP-SHIP FRIENDLY

21 22


**

*


AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

Features:- 2.5 Gallon VIAIR Air Tank (200 PSI)- (2) 380C VIAIR Compressors with 1/4" Stainless Steel Braided Leader Hoses- 30ft. Coil Hose w/ Quick Connects- Tire Inflation Gun w/ 200 PSI Gauge- 0-220 PSI Pressure Regulator- Sealed Pressure Switch (165 PSI on, 200 PSI off)- 200 PSI Illuminated Dash Panel Gauge- (2) 40-amp Relays- 1/4" Quick Connect Coupler (M)

- 1/4" 250 PSI Safety Valve- 1/4" Drain Cock- (3) 1/4" Compression Fittings - Inline Fuse Holder- 6-Port Billet Manifold w/ Mounting Bracket (1/4" NPT)- (2) 15ft. 1/4" Air Line Included- 5 pc. 1/4" NPT Plugs Kit- (2) 1/8" BSP to 1/4" NPT (Air Locker Use)- Electrical Connections- Permanent Magnetic Motor

Performance Data

PSI CFM A BAR LPM A

0 2.54 28 0 72.0 28

40 2.07 34 3 57.5 34

90 1.61 39 6 46.4 39

150 1.19 42 10 34.5 42

200 0.86 37 14 23.7 37

Fill Rates


0 to 200 PSI 3 min. 13 sec. (+10 sec.)

165 to 200 PSI 53 sec. (+05 sec.)


0 to 30 PSI 5 min. 00 sec. (+15 sec.)

15 to 30 PSI 2 min. 30 sec. (+10 sec.)


0 to 30 PSI 5 min. 25 sec. (+15 sec.)


Dual 38OCOBA System


AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

Features:- 2.0 Gallon VIAIR Air Tank (150 PSI)- (2) 400C VIAIR Compressors with 1/4" Stainless Steel Braided Leader Hoses- 30ft. Coil Hose w/ Quick Connects- Tire Inflation Gun w/ 200 PSI Gauge- 0-220 PSI Pressure Regulator- Sealed Pressure Switch (110 PSI on, 145 PSI off)- 150 PSI Illuminated Dash Panel Gauge- (2) 40-amp Relays- Electrical Connections

- 1/4" Quick Connect Coupler (M)- 1/4" 175 PSI Safety Valve- 1/4" Drain Cock- (2) 1/8" BSP to 1/4" NPT (Air Locker Use)- (3) 1/4" Compression Fittings - Inline Fuse Holder- 6-Port Billet Manifold w/ Mounting Bracket (1/4" NPT)- 5 Pc. 1/4" NPT Plugs Kit- (2) 15ft. 1/4" Air Line Included- Permanent Magnetic Motor

Performance Data

PSI CFM A BAR LPM A

0 4.55 39 0 129.0 39

40 3.50 46 3 96.6 47

90 2.46 59 6 70.8 58

150 1.48 49 10 43.7 50

Fill Rates


0 to 145 PSI 1 min. 00 sec. (+05 sec.)

110 to 145 PSI 20 sec. (+03 sec.)


0 to 30 PSI 3 min. 25 sec. (+10 sec.)

15 to 30 PSI 1 min. 40 sec. (+05 sec.)


0 to 30 PSI 3 min. 35 sec. (+10 sec.)

15 to 30 PSI 1 min. 45 sec. (+05 sec.)Recommended Components: Mounting Bracket - P/N 95900


150 PSI / 4.55 CFM

Dual 4OOCOBA System

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

Features:- 2.5 Gallon VIAIR Air Tank (200 PSI)- (2) 444C VIAIR Compressors with 1/4" Stainless Steel Braided Leader Hoses- 30ft. Coil Hose w/ Quick Connects- Tire Inflation Gun w/ 200 PSI Gauge- 0-220 PSI Pressure Regulator- Sealed Pressure Switch (165 PSI on, 200 PSI off)- 200 PSI Illuminated Dash Panel Gauge- 1/4" Drain Cock- (2) 40-amp Relays

- Inline Fuse Holder- 1/4" Quick Connect Coupler (M)- 1/4" 250 PSI Safety Valve- (2) 1/8" BSP to 1/4" NPT- (3) 1/4" Compression Fittings - 6-Port Billet Manifold w/ Mounting Bracket (1/4")- (2) 15ft. 1/4" Air Line Included- 5 Pc. 1/4" NPT Plugs Kit- Electrical Connections- Permanent Magnetic Motor

Performance Data

PSI CFM A BAR LPM A

0 3.53 25 0 100.0 25

40 2.72 34 3 75.6 34

90 2.03 39 6 59.0 39

150 1.32 38 10 38.8 38

200 0.85 33 14 23.8 33

Fill Rates


0 to 200 PSI 2 min. 30 sec. (+10 sec.)

165 to 200 PSI 46 sec. (+05 sec.)


0 to 30 PSI 3 min. 50 sec. (+10 sec.)

15 to 30 PSI 1 min. 55 sec. (+05 sec.)


0 to 30 PSI 4 min. 40 sec. (+10 sec.)


Dual 444COBA System


AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

Features:- 2.5 Gallon VIAIR Air Tank (150 PSI)- (2) 450C VIAIR Compressors- 30ft. Coil Hose w/ Quick Connects- Tire Inflation Gun w/ 200 PSI Gauge- 0-220 PSI Pressure Regulator- Sealed Pressure Switch (110 PSI on, 145 PSI off)- 150 PSI Illuminated Dash Panel Gauge- (2) 40-amp Relays

- Inline Fuse Holder- 1/4" Quick Connect Coupler (M)- 1/4" 175 PSI Safety Valve- 1/4" Drain Cock- (2) 1/8" BSP to 1/4" NPT- (3) 1/4" Compression Fittings - 6-Port Billet Manifold w/ Mounting Bracket (1/4")- (2) 15ft. 1/4" Air Line Included- 5 Pc. 1/4" NPT Plugs Kit- Electrical Connections- Permanent Magnetic Motor

Performance Data

PSI CFM A BAR LPM A

0 3.28 28 0 93.0 28

40 2.54 36 3 71.0 37

90 1.94 43 6 56.0 42

150 1.27 41 10 37.5 41

Fill Rates


0 to 145 PSI 1 min. 30 sec. (+05 sec.)

110 to 145 PSI 31 sec. (+03 sec.)


0 to 30 PSI 3 min. 50 sec. (+10 sec.)

15 to 30 PSI 1 min. 55 sec. (+05 sec.)


0 to 30 PSI 4 min. 15 sec. (+10 sec.)

15 to 30 PSI 2 min. 15 sec. (+05 sec.)

Recommended Components: Mounting Bracket - P/N 95900


150 PSI / 3.28 CFM

Dual 45OCOBA System40"

FOR UP TO


40"FOR UP TO

TIRES33% DUTY@ 100 PSI 40"

FOR UP TO


40"FOR UP TO






DROP-SHIP FRIENDLY DROP-SHIP

FRIENDLY

DROP-SHIP FRIENDLY DROP-SHIP

FRIENDLY

23 24

* *

**



IF YOU CAN HANDLE THE PRESSURE...YOU CAN HANDLE ANYTHING.

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

Specifications:- 12-Volt- Duty Cycle: 30% @ 100 PSI- Max. Working Pressure: 150 PSI- Dimensions: 18.9"L x 5.9"W x 13.7"H- Net Weight: 19.75 lbs.

Specifications:- 12-Volt- Duty Cycle: 100% @ 100 PSI 50% @ 200 PSI- Max. Working Pressure: 200 PSI- Dimensions: 19.7"L x 5.9"W x 13.9"H- Net Weight: 22.95 lbs.

Specifications:- 12-Volt- Duty Cycle: 25% @ 100 PSI- Max. Working Pressure: 120 PSI- Dimensions: 15.2"L x 5.9"W x 12.8"H- Net Weight: 15.65 lbs.

Specifications:- 12-Volt- Duty Cycle: 100% @ 100 PSI 55% @ 200 PSI- Max. Working Pressure: 200 PSI- Dimensions: 19"L x 5.9"W x 14.2"H- Net Weight: 21.05 lbs.


15O PSI High-Flow

P/N 20005

150 PSI / 1.59 CFM


2OO PSI High-Flow

P/N 20008

200 PSI / 1.86 CFM


12O PSI Fast-Fill

P/N 20003

120 PSI / 2.03 CFM


2OO PSI Fast-Fill

P/N 20007

200 PSI / 1.58 CFM

Tank Fill Rates


0 to 120 PSI 2 min. 10 sec. (+10 sec.)

90 to 120 PSI 35 sec. (+05 sec.)

Tank Fill Rates


0 to 200 PSI 5 min. 30 sec. (+10 sec.)

165 to 200 PSI 1 min. 25 sec. (+05 sec.)

Tank Fill Rates


0 to 145 PSI 3 min. 40 sec. (+10 sec.)

110 to 145 PSI 1 min. 15 sec. (+05 sec.)

Tank Fill Rates


0 to 200 PSI 3 min. 56 sec. (+10 sec.)

165 to 200 PSI 1 min. 02 sec. (+05 sec.)

Performance Data

PSI CFM A BAR LPM A

0 2.03 10 0 57.5 10

40 1.01 15 3 28.5 16

90 0.79 17 6 22.5 17

120 0.69 18 8 20.0 18

Performance Data

PSI CFM A BAR LPM A

0 1.58 12 0 44.7 12

40 1.09 16 3 30.6 16

90 0.88 19 6 25.3 19

150 0.67 20 10 19.5 21

200 0.49 18 14 13.5 18

Performance Data

PSI CFM A BAR LPM A

0 1.59 10 0 45.0 10

40 1.04 15 3 29.0 15

90 0.76 17 6 22.0 17

150 0.51 17 10 15.3 17

Performance Data

PSI CFM A BAR LPM A

0 1.86 10 0 52.7 10

40 1.45 16 3 40.7 16

90 1.13 19 6 32.6 19

150 0.75 21 10 22.3 21

200 0.51 19 14 14.0 19

Recommended Components: Relay - P/N 93940




Features: - 275C Pewter Air Compressor with 1/4" Stainless Steel Braided Leader Hose - 1.5 Gallon Air Tank - 1/2" port compression fitting for 3/8" (I.D.) air line- Pressure Switch (90 PSI On / 120 PSI Off) - Safety Valve (145 PSI) - Drain Cock - Leader Hose w/ Check Valve

Features: - 380C Pewter Air Compressor with 1/4" Stainless Steel Braided Leader Hose- 2.0 Gallon Air Tank- 1/2" port compression fitting for 3/8" (I.D.) air line - Pressure Switch (165 PSI On / 200 PSI Off) - Safety Valve (250 PSI) - Drain Cock - Leader Hose w/ Check Valve

Features: - 280C Pewter Air Compressor with 1/4" Stainless Steel Braided Leader Hose- 2.0 Gallon Air Tank - 1/2" port compression fitting for 3/8" (I.D.) air line- Pressure Switch (110 PSI On / 145 PSI Off) - Safety Valve (175 PSI) - Drain Cock - Leader Hose w/ Check Valve

Features: - 480C Pewter Air Compressor with 3/8" Stainless Steel Braided Leader Hose- 2.0 Gallon Air Tank- 1/2" port compression fitting for 3/8" (I.D.) air line - Pressure Switch (165 PSI On / 200 PSI Off) - Safety Valve (250 PSI) - Drain Cock - Leader Hose w/ Check Valve

Photo Credit: Marc Shap 26 * Due to redundant restrictions added to apparatus, for flow rate testing, actual flow rate at 0 psi may vary.

* *

*

*

P/N 30001

P/N 30005


TWO HEADS AREBETTER THAN ONE...EVEN IF YOU’RE WORKING ALONE.

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

40"FOR UP TO

TIRES

40"FOR UP TO

TIRES

Fill Rates


0 to 200 PSI 2 min. 35 sec. (±10 sec.)

165 to 200 PSI 40 sec. (±05 sec.)


0 to 30 PSI 5 min. 00 sec. (±15 sec.)

15 to 30 PSI 2 min. 30 sec. (±10 sec.)


0 to 30 PSI 5 min. 25 sec. (±15 sec.)

15 to 30 PSI 2 min. 40 sec. (±10 sec.)

Tank Fill Rates


0 to 145 PSI 1 min. 00 sec. (±05 sec.)

110 to 145 PSI 20 sec. (±03 sec.)


0 to 30 PSI 3 min. 25 sec. (±10 sec.)

15 to 30 PSI 1 min. 40 sec. (±05 sec.)


0 to 30 PSI 3 min. 35 sec. (±10 sec.)

15 to 30 PSI 1 min. 45 sec. (±05 sec.)

Performance Data

PSI CFM A BAR LPM A

0 4.55 39 0 129.0 39

40 3.50 46 3 96.6 47

90 2.46 59 6 70.8 58

150 1.48 49 10 43.7 50

Performance Data

PSI CFM A BAR LPM A

0 2.54 28 0 72.0 28

40 2.07 34 3 57.5 34

90 1.61 39 6 46.4 39

150 1.19 42 10 34.5 42

200 0.86 37 14 23.7 37

Features: - 2.0 Gallon 5-Port Air Tank- (2) 380C Air Compressors with 1/4" Stainless Steel Braided Leader Hoses- (2) 1/4" JIC Fittings on Leader Hoses- 1/4" NPT Swivel to 1/4" NPT Swivel - T-Fitting (Remote Mount Filter)- 1/4" NPT Drain Cock- Sealed Pressure Switch (165 PSI On, 200 PSI Off) - (2) Loomed Compressor Wires Terminated w/ Delphi Connectors- Prewired Delphi Connector on Pressure Switch Wiring- 1/4" NPT Safety Valve - 1/4" Hex Plug - Crossmember Mounting Bracket (P/N 30005 Only)- 6-Port Billet Manifold w/ Mounting Bracket (1/4" NPT)- 15ft. 1/4" Air Line Included

High Pressure

P/N 30005 - JK Jeep 2007-2011 (with Crossmember Bracket)P/N 30018 - Universal (Crossmember Bracket Not Included)

200 PSI / 2.54 CFM

Features: - 2.0 Gallon 5-Port Air Tank- (2) 400C Air Compressors with 1/4" Stainless Steel Braided Leader Hoses- (2) 1/4" JIC Fittings on Leader Hoses- 1/4" NPT Swivel to 1/4" NPT Swivel - T-Fitting (Remote Mount Filter)- 1/4" NPT Drain Cock- Sealed Pressure Switch w/ Delphi Connectors (110 PSI On, 145 PSI Off)- (2) Loomed Compressor Wires Terminated w/ Delphi Connectors- Prewired Delphi Connector on Pressure Switch Wiring- 1/4" NPT Safety Valve - 1/4" Hex Plug - Crossmember Mounting Bracket (P/N 30001 Only)- 6-Port Billet Manifold w/ Mounting Bracket (1/4" NPT)- 15ft. 1/4" Air Line Included

Specifications:- 12-Volt- Duty Cycle: 33% @ 100 PSI- Max. Working Pressure: 150 PSI - Dimensions: 18.5"L x 5.9"W x 13.5"H- Net Weight: 30.0 lbs.

High Speed

P/N 30001 - JK Jeep 2007-2011 (with Crossmember Bracket)P/N 30016 - Universal (Crossmember Bracket Not Included)



Recommended Components: Tire Inflation Kits - P/N's; 00043, 00044

Specifications:- 12-Volt- Duty Cycle: 100% @ 100 PSI 55% @ 200 PSI- Max. Working Pressure: 200 PSI - Dimensions: 18.5"L x 5.9"W x 13.5"H- Net Weight: 30.0 lbs.

Recommended Components: Tire Inflation Kits - P/N's; 00043, 00044, 00047

33% DUTY@ 100 PSI

100% DUTY@ 100 PSI

28

* / * ** * *

* Due to redundant restrictions added to apparatus, for flow rate testing, actual flow rate at 0 psi may vary. * * Combined CFM * * * Combined Max Amp Draw

* / * ** * *

P/N 42045 I P/N 42047

Base Model Kit:

P/N 45052 I P/N 45054

Base Model Kit:

P/N 40049


YOU COULD TAKETHE SHORTCUT...BUT WHERE’S THE FUN IN THAT?

P/N 45055

Performance Data

PSI CFM A BAR LPM A

0 2.62 15 0 74.0 16

40 2.01 24 3 56.0 25

90 1.52 27 6 46.0 28

150 1.01 26 10 31.0 27

35"FOR UP TO

TIRES

Tire Fill Rates


0 to 30 PSI 3 min. 00 sec. (+10 sec.)

15 to 30 PSI 1 min. 35 sec. (+05 sec.)


0 to 30 PSI 4 min. 20 sec. (+10 sec.)

15 to 30 PSI 2 min. 05 sec. (+05 sec.)


0 to 30 PSI 5 min. 20 sec. (+15 sec.)

15 to 30 PSI 2 min. 45 sec. (+10 sec.)

Performance Data

PSI CFM A BAR LPM A

0 1.80 12 0 51.0 12

40 1.39 18 3 38.2 18

90 0.97 21 6 28.1 21

150 0.72 20 10 21.0 21

37"FOR UP TO

TIRES

Tire Fill Rates


0 to 30 PSI 5 min. 30 sec. (+10 sec.)

15 to 30 PSI 2 min. 50 sec. (+05 sec.)


0 to 30 PSI 6 min. 55 sec. (+15 sec.)

15 to 30 PSI 3 min. 30 sec. (+10 sec.)


0 to 30 PSI 7 min. 56 sec. (+15 sec.)

15 to 30 PSI 4 min. 09 sec. (+10 sec.)

Specifications:- 12-Volt- Permanent Magnetic Motor- Duty Cycle: 33% @ 100 PSI- Max. Working Pressure: 150 PSI- Dimensions: 9"L x 4"W x 6.75"H- Net Weight: 10.0 lbs.

Heavy Duty ADA

P/N 40049 - UniversalP/N 42045 - Base Model: 85/105 PSIP/N 42047 - Base Model: 110/145 PSI

150 PSI / 2.62 CFM

Features:- 400C Compressor- Extruded Aluminum Air Tank (12-port)- Toggle Switch* - Air Line for Remote Mount Air Filter- (2) Remote Mount Air Filter Fittings - 1/8" NPT Drain Cock- 1/4" NPT Safety Valve- (8) 1/4" NPT Hex Plug- 1/4" NPT Sealed Pressure Switch - (2) 1/4" NPT BSP Adapter- 1/4" NPT Automatic Coupler - Digital Tire Inflation Kit* - 40-amp Relay* * - Wiring Harness*

Specifications:- 12-Volt- Permanent Magnetic Motor- Duty Cycle: 100% @ 100 PSI- Max. Working Pressure: 150 PSI- Dimensions: 9.38"L x 4"W x 6.75"H- Net Weight: 12.5 lbs.

* Not included with Base Models.* * Included with Base Models Only.

Constant Duty ADA

P/N 45055 - UniversalP/N 45052 - Base Model: 85/105 PSIP/N 45054 - Base Model: 110/145 PSI

150 PSI / 1.80 CFM

Features:- 450C Compressor- Extruded Aluminum Air Tank (12-port)- Toggle Switch* - Air Line for Remote Mount Air Filter- (2) Remote Mount Air Filter Fittings - 1/8" NPT Drain Cock- 1/4" NPT Safety Valve- (8) 1/4" NPT Hex Plug- 1/4" NPT Sealed Pressure Switch - (2) 1/4" NPT BSP Adapter- 1/4" NPT Automatic Coupler - Digital Tire Inflation Kit* - 40-amp Relay* * - Wiring Harness*

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

Max. Amp Draw: 28 Amps Max. Amp Draw: 23 Amps

33% DUTY@ 100 PSI

100% DUTY@ 100 PSI

* Not included with Base Models.* * Included with Base Models Only.

29 30


**

Illuminated Pressure Display


Performance Data

PSI CFM A BAR LPM A

0 1.06 12 0 30.0 12

40 0.76 14 3 20.6 14

100 0.33 13 7 9.1 13

Performance Data

PSI CFM A BAR LPM A

0 1.06 12 0 30.0 12

40 0.76 14 3 20.6 14

80 0.46 14 7 9.1 13

Tire Fill Rates

195 / 70R14 Fill Rate

0 to 30 PSI 2 min. 55 sec. (+10sec.)

15 to 30 PSI 1 min. 45 sec. (+05 sec.)


0 to 30 PSI 4 min. 22 sec. (+10sec.)

15 to 30 PSI 2 min. 10 sec. (+05 sec.)

Tire Fill Rates


0 to 30 PSI 2 min. 55 sec. (+10sec.)

15 to 30 PSI 1 min. 45 sec. (+05 sec.)


0 to 30 PSI 4 min. 22 sec. (+10sec.)

15 to 30 PSI 2 min. 10 sec. (+05 sec.)

Features:- Vibration Isolators - Deluxe Carry Bag- 3-pc. Inflation Tips Kit- 150 PSI Gauge- Accessory Power Plug- 15-amp Inline Fuse Holder

Features:- Vibration Isolators - Deluxe Carry Bag- 3-pc. Inflation Tips Kit- 80 PSI Gauge- Accessory Power Plug- 15-amp Inline Fuse Holder

Specifications:- 12-Volt- Duty Cycle: 30 min. @ 30 PSI- Max. Working Pressure: 100 PSI- Ingress Protection Rating: IP54- Net Weight: 5.05 lbs.- 6.5"L x 3.6"W x 6.2"H- Power Cord Length: 16 ft.- Air Hose Length: 4 ft.

Specifications:- 12-Volt- Duty Cycle: 30 min. @ 30 PSI- Max. Working Pressure: 80 PSI- Ingress Protection Rating: IP54- Net Weight: 5.0 lbs.- 7.35"L x 3.6"W x 5.4"H- Power Cord Length: 16.5 ft.- Air Hose Length: 4 ft.

Recommended Components: 6ft. Portable Air Extension Hose - P/N 00016


Note: Always check your vehicle’s power port rating for maximum amperage before ordering the 70P. The 70P does not work with Presta bicycle valves.


7OP

P/N 00073


225/60R18TIRES

FOR UP TO

30 MIN. DUTY@ 30 PSI

225/60R18TIRES

FOR UP TO


AIR WHENYOU NEED IT...PEACE OF MIND WHEN YOU DON’T.

Performance Data

PSI CFM A BAR LPM A

0 1.26 13 0 35.7 13

40 0.92 15 3 24.8 15

60 0.71 13 4 20.5 13

Performance Data

PSI CFM A BAR LPM A

0 1.26 13 0 35.7 13

40 0.92 15 3 24.8 15

60 0.71 13 4 20.5 13

Features:- 120 PSI Pressure Gauge- Solid Brass Twist-on Tire Chuck- Accessory Power Plug- Deluxe Carry Bag- 3-pc. Inflation Tips Kit- LED Work Light / Power Indicator

Features:- 120 PSI Pressure Gauge- Solid Brass Twist-on Tire Chuck - Dual Battery Clamps w/ 20-amp Inline Fuse Holder- Deluxe Carry Bag- 3-pc. Inflation Tips Kit- LED Work Light / Power Indicator

Specifications:- 12-volt- Duty Cycle: 20 Min. @ 30 PSI - Max. Working Pressure: 60 PSI- Ingress Protection Rating: IP53- Net Weight: 4.3 lbs.- 9.1"L x 3.1"W x 5.6"H- Power Cord Length: 10 ft.- Air Hose Length: 3 ft.

Specifications:- 12-volt- Duty Cycle: 20 Min. @ 30 PSI - Max. Working Pressure: 60 PSI- Ingress Protection Rating: IP53- Net Weight: 4.3 lbs.- 9.1"L x 3.1"W x 5.6"H- Power Cord Length: 10 ft.- Air Hose length: 8 ft.

Tire Fill Rates


0 to 30 PSI 2 min. 10 sec. (+10 sec.)

15 to 30 PSI 1 min. 10 sec. (+05 sec.)


0 to 30 PSI 2 min. 00 sec. (+10 sec.)

15 to 30 PSI 1 min. 35 sec. (+05 sec.)


0 to 30 PSI 4 min. 50 sec. (+10 sec.)

15 to 30 PSI 2 min. 35 sec. (+05 sec.)

Tire Fill Rates


0 to 30 PSI 2 min. 10 sec. (+10 sec.)

15 to 30 PSI 1 min. 10 sec. (+05 sec.)


0 to 30 PSI 3 min. 00 sec. (+10 sec.)

15 to 30 PSI 1 min. 35 sec. (+05 sec.)


0 to 30 PSI 4 min. 50 sec. (+10 sec.)

15 to 30 PSI 2 min. 35 sec. (+05 sec.)






85P

P/N 00085


87P

P/N 00087


AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

AirLockers

AirTools

AirBags

AirHorns

AirTanks

LoadLevelers

TireInflation

31"FOR UP TO

TIRES

31"FOR UP TO

TIRES

77P

P/N 00077


Features:- 120 PSI Pressure Gauge- Solid Brass Twist-on Tire Chuck- 3-pc. Inflation Tips Kit- LED Work Light / Power Indicator- Dual Battery Clamps w/ 20-amp Inline Fuse Holder

Specifications:- 12-volt- Permanent Magnetic Motor- Duty Cycle: 25 Min. @ 30 PSI - Max. Working Pressure: 120 PSI- Ingress Protection Rating: IP53 - Net Weight: 4.75 lbs.- 9.8"L x 3.1"W x 5.6"H- Power Cord Length: 9 ft.- Air Hose Length: 16 ft.

33"FOR UP TO

TIRES


Performance Data

PSI CFM A BAR LPM A

0 1.47 17 0 41.7 17

40 1.15 18 3 31.5 19

90 0.64 17 6 19.1 17

120 0.35 14 8 11.1 15

Tire Fill Rates


0 to 30 PSI 2 min. 30 sec. (+10 sec.)

15 to 30 PSI 1 min. 19 sec. (+05 sec.)


0 to 30 PSI 3 min. 50 sec. (+10 sec.)

15 to 30 PSI 2 min. 05 sec. (+05 sec.)


0 to 30 PSI 5 min. 45 sec. (+15 sec.)

15 to 30 PSI 2 min. 56 sec. (+05 sec.)


88P

P/N 00088


Note: The 87P does not work with Presta bicycle valves.


31 32 * Due to redundant restrictions added to apparatus, for flow rate testing, actual flow rate at 0 psi may vary.

*

*

*

*

*


Performance Data

PSI CFM A BAR LPM A

0 1.21 15 0 34.3 15

40 0.98 19 3 27.1 19

90 0.68 22 6 19.7 22

120 0.54 21 8 15.7 21

Features:- Heavy Duty Steel Stand w/ Vibration Isolator - Deluxe Carry Bag- 3-pc. Inflation Tips Kit- Tire Chuck w/ Built-in Bleeder Valve - 120 PSI Gauge w/ Rubber Boot- Dual Battery Clamps w/ 30-amp Inline Fuse Holder

Specifications:- 12-Volt- Permanent Magnetic Motor- Duty Cycle: 15% @ 100 PSI- Max. Working Pressure: 120 PSI- Ingress Protection Rating: IP54- Net Weight: 5.75 lbs.- 6.8"L x 3.7"W x 6.5"H- Power Cord Length: 12 ft.- Air Hose Length: 5 ft.

9OP

P/N 00093


31"FOR UP TO

TIRES

15% DUTY@ 100 PSI

Performance Data: 400P-24V

PSI CFM A BAR LPM A

0 2.54 10 0 72.0 10

40 1.84 13 3 50.7 13

90 1.41 15 6 40.5 14

150 0.71 14 10 22.1 14

Performance Data: 400P-12V

PSI CFM A BAR LPM A

0 2.30 17 0 65.1 17

40 1.75 24 3 48.5 24

90 1.28 28 6 37.0 28

150 0.71 27 10 22.1 27

Features:- Vibration-Resistant Diamond-Plate Sand Tray- Deluxe Dual Compartment Carry Bag- Dual Battery Clamps w/ 40-amp Inline Fuse Holder (P/N 40043)- Dual Battery Clamps w/ 20-amp Inline Fuse Holder (P/N 40050)- 3-pc. Inflation Tips Kit- 5-in-1 Inflator/Deflator w/ Inline 100 PSI Gauge

Specifications:- 12-Volt or 24-Volt- Duty Cycle: 33% @ 100 PSI - Max. Working Pressure: 150 PSI- Ingress Protection Rating: IP54- Net Weight: 10.4 lbs.- 10.9"L x 5.8"W x 7.5"H- Power Cord Length: 8 ft.- Air Hose Length: 25 ft.

Recommended Components:Extension Hose - P/N 0003135"

FOR UP TO

TIRES

33% DUTY@ 100 PSI

Tire Fill Rates


0 to 30 PSI 2 min. 50 sec. (+10 sec.)

15 to 30 PSI 1 min. 25 sec. (+05 sec.)


0 to 30 PSI 4 min. 00 sec. (+10 sec.)

15 to 30 PSI 2 min. 00 sec. (+05 sec.)


0 to 30 PSI 5 min. 05 sec. (+15 sec.)

15 to 30 PSI 2 min. 40 sec. (+10 sec.)

Tire Fill Rates


0 to 30 PSI 3 min. 00 sec. (+10 sec.)

15 to 30 PSI 1 min. 35 sec. (+05 sec.)


0 to 30 PSI 4 min. 20 sec. (+10 sec.)

15 to 30 PSI 2 min. 05 sec. (+05 sec.)


0 to 30 PSI 5 min. 20 sec. (+15 sec.)

15 to 30 PSI 2 min. 45 sec. (+10 sec.)

Performance Data

PSI CFM A BAR LPM A

0 2.30 17 0 65.0 17

40 1.48 25 3 40.5 26

90 0.92 28 6 26.6 28

150 0.46 27 10 14.0 28

Features:- Aluminum Sand Tray w/ Vibration Isolators - Deluxe Dual Compartment Carry Bag- 3-pc. Inflation Tips Kit- 5-in-1 Inflator/Deflator w/ Inline 100 PSI Gauge- Dual Battery Clamps w/ 40-amp Inline Fuse Holder

Specifications:- 12-Volt- Duty Cycle: 33% @ 100 PSI- Max. Working Pressure: 150 PSI- Ingress Protection Rating: IP54- Net Weight: 8.7 lbs.- 9"L x 4.9"W x 7.5"H- Power Cord Length: 8 ft.- Air Hose Length: 25 ft.

Recommended Components:Extension Hose - P/N 00031

33"FOR UP TO

TIRES

33% DUTY@ 100 PSI

3OOP

P/N 30033


4OOP

P/N 40043 - 12V

150 PSI / 2.30 CFM 12V / 2.54 CFM 24V12V Max. Amp Draw: 30 Amps24V Max. Amp Draw: 15 Amps

P/N 40050 - 24V NEW

Tire Fill Rates


0 to 30 PSI 5 min. 00 sec. (+10 sec.)

15 to 30 PSI 2 min. 35 sec. (+05 sec.)

Tire Fill Rates


0 to 30 PSI 3 min. 25 sec. (+10 sec.)

15 to 30 PSI 2 min. 00 sec. (+05 sec.)


0 to 30 PSI 5 min. 00 sec. (+10 sec.)

15 to 30 PSI 2 min. 45 sec. (+05 sec.)

RV Tire Fill Rates

275/80R22.5 Fill Rate

80 to 90 PSI 30 sec. (+05 sec.)

90 to 110 PSI 3 min. 50 sec. (+10 sec.)

110 to 130 PSI 4 min. 37 sec. (+15 sec.)

Performance Data

PSI CFM A BAR LPM A

0 2.30 17 0 65.1 17

40 1.75 24 3 48.5 24

90 1.28 28 6 37.0 28

150 0.71 27 10 22.1 27

Specifications:- 12-volt- Duty Cycle: 33% @ 100 PSI - Max. Working Pressure: 150 PSI- Ingress Protection Rating: IP54- Net Weight: 10.7 lbs.- 10.9"L x 5.8"W x 7.5"H- Power Cord Length: 8 ft.- Air Hose Length: 30 ft.


4OOP-Automatic

P/N 40045


35"FOR UP TO

TIRES

33% DUTY@ 100 PSI

Tire Fill Rates


0 to 30 PSI 3 min. 00 sec. (+10 sec.)

15 to 30 PSI 1 min. 35 sec. (+05 sec.)


0 to 30 PSI 4 min. 20 sec. (+10 sec.)

15 to 30 PSI 2 min. 05 sec. (+05 sec.)


0 to 30 PSI 5 min. 20 sec. (+15 sec.)

15 to 30 PSI 2 min. 45 sec. (+10 sec.)

Features:- Automatic Shut-Off Function- Vibration-Resistant Diamond-Plate Sand Tray - Deluxe Dual Compartment Carry Bag- 35ft. Quick Connect Extension Hose w/ Heat Shield- Gas Station-Style Tire Gun w/ 160 PSI Gauge- 3-pc. Inflation Tips Kit- Dual Battery Clamps w/ 40-amp Inline Fuse Holder

Upgrades: Digital Tire Inflation Gun - P/N; 00042

RV Tire Fill Rates


80 to 90 PSI 30 sec. (+05 sec.)

90 to 110 PSI 3 min. 50 sec. (+10 sec.)

110 to 130 PSI 4 min. 37 sec. (+15 sec.)




Note: The 400P-Automatic does not work with Presta bicycle valves.

33 34


*

* *

* *

Specifications:- 12-volt- Duty Cycle: 100% @ 100 PSI - Max. Working Pressure: 150 PSI- Ingress Protection Rating: IP54- Net Weight: 12.95 lbs.- 10.9"L x 5.8"W x 7.5"H- Power Cord Length: 8 ft.- Primary Air Hose Length: 30 ft.- Extension Air Hose Length: 30 ft.


45OP-RV-Automatic

P/N 45053


37"FOR UP TO

TIRES

100% DUTY@ 100 PSI

Features:- Automatic Shut-Off Function- Primary & Extension Air Hoses- Vibration-Resistant Diamond-Plate Sand Tray- Deluxe Dual Compartment Carry Bag- Heat Shielded Quick Connect Coupling- Tire Inflation Gun with 160 PSI Inline Gauge- Heavy Duty Dual Battery Clamps w/ Inline Fuse- 45-Degree Extended Reach Chuck (For Dual Rear Wheels)- 90-Degree Twist-On Chuck- Heavy Duty Deluxe Carry Bag- 3 pc. Inflation Tips Kit


Note: The 450P-RV-Automatic does not work with Presta bicycle valves.



Specifications:- 12-volt- Duty Cycle: 100% @ 100 PSI - Max. Working Pressure: 150 PSI- Ingress Protection Rating: IP54- Net Weight: 12.95 lbs.- 10.9"L x 5.8"W x 7.5"H- Power Cord Length: 8 ft.- Air Hose Length: 30 ft.


45OP-Automatic

P/N 45043

150 PSI / 1.80 CFMMax. Amp Draw: 23 Amps 37"

FOR UP TO

TIRES

100% DUTY@ 100 PSI

Specifications:- 12-Volt- Duty Cycle: 33% @ 100 PSI- Max. Working Pressure: 150 PSI- Ingress Protection Rating: IP54- Net Weight: 10.55 lbs.- 10.9"L x 5.8"W x 7.5"H- Power Cord: 8 ft.- Primary Air Hose Length: 30 ft.- Extension Air Hose Length: 30 ft.

4OOP-RV-Automatic

P/N 40047

150 PSI / 2.30 CFMMax. Amp Draw: 30 Amps 35"

FOR UP TO

TIRES

33% DUTY@ 100 PSI

Features:- Automatic Shut-Off Function- Vibration-Resistant Diamond-Plate Sand Tray- Deluxe Dual Compartment Carry Bag- Primary & Extension Air Hoses - Heat Shielded Quick Connect Coupling- Gas Station-Style Tire Gun w/ 160 PSI Gauge - Heavy Duty Dual Battery Clamps w/ 40-amp Inline Fuse - 45-Degree Extended Reach Chuck (For Dual Rear Wheels) - 90-Degree Twist-On Chuck - Heavy Duty Deluxe Carry Bag Included- 3-pc. Inflation Tips Kit


Features:- Automatic Shut-Off Function- Vibration-Resistant Diamond-Plate Sand Tray- Deluxe Dual Compartment Carry Bag- 35 ft. Quick Connect Extension Hose w/ Heat Shield- Gas Station-Style Tire Gun w/ 160 PSI Gauge- 3-pc. Inflation Tips Kit- Dual Battery Clamps w/ 30-amp Inline Fuse Holder


Performance Data

PSI CFM A BAR LPM A

0 3.00 34 0 85.0 34

40 2.12 41 3 58.9 41

90 1.44 42 6 41.6 42

150 0.75 35 10 22.7 36

Specifications:- 12-Volt- Duty Cycle: 33% @ 100 PSI- Max. Working Pressure: 150 PSI- Ingress Protection Rating: IP54- Net Weight: 12.65 lbs.- 10.9"L x 5.8"W x 6.5"H- Power Cord Length: 8 ft.- Air Hose Length: 25 ft.

37"FOR UP TO

TIRES

33% DUTY@ 100 PSI

44OP

P/N 44043


Features:- Vibration-Resistant Diamond-Plate Sand Tray- Deluxe Dual Compartment Carry Bag- 3-pc. Inflation Tips Kit- 5-in-1 Inflator/Deflator w/ Inline 120 PSI Gauge- Dual Battery Clamps w/ 50-amp Inline Fuse Holder

Tire Fill Rates


0 to 30 PSI 4 min. 30 sec. (+10 sec.)

15 to 30 PSI 2 min. 15 sec. (+05 sec.)


0 to 30 PSI 4 min. 50 sec. (+10 sec.)

15 to 30 PSI 2 min. 40 sec. (+05 sec.)

Performance Data

PSI CFM A BAR LPM A

0 2.30 17 0 65.1 17

40 1.75 24 3 48.5 24

90 1.28 28 6 37.0 28

150 0.71 27 10 22.1 27

Tire Fill Rates


0 to 30 PSI 3 min. 00 sec. (+10 sec.)

15 to 30 PSI 1 min. 35 sec. (+05 sec.)


0 to 30 PSI 4 min. 20 sec. (+10 sec.)

15 to 30 PSI 2 min. 05 sec. (+05 sec.)


0 to 30 PSI 5 min. 20 sec. (+15 sec.)

15 to 30 PSI 2 min. 45 sec. (+10 sec.)

Performance Data

PSI CFM A BAR LPM A

0 1.80 12 0 51.0 12

40 1.39 18 3 38.2 18

90 0.97 21 6 28.1 21

150 0.72 20 10 21.0 21

Tire Fill Rates


0 to 30 PSI 4 min. 05 sec. (+10 sec.)

15 to 30 PSI 2 min. 10 sec. (+05 sec.)


0 to 30 PSI 5 min. 30 sec. (+10 sec.)

15 to 30 PSI 2 min. 50 sec. (+05 sec.)


0 to 30 PSI 6 min. 55 sec. (+15 sec.)

15 to 30 PSI 3 min. 30 sec. (+10 sec.)


0 to 30 PSI 7 min. 56 sec. (+15 sec.)

15 to 30 PSI 4 min. 09 sec. (+10 sec.)

RV Tire Fill Rates


80 to 90 PSI 30 sec. (+05 sec.)

90 to 110 PSI 3 min. 50 sec. (+10 sec.)

110 to 130 PSI 4 min. 37 sec. (+15 sec.)

Performance Data

PSI CFM A BAR LPM A

0 1.80 12 0 51.0 12

40 1.39 18 3 38.2 18

90 0.97 21 6 28.1 21

150 0.72 20 10 21.0 21

Tire Fill Rates


0 to 30 PSI 4 min. 05 sec. (+10 sec.)

15 to 30 PSI 2 min. 10 sec. (+05 sec.)


0 to 30 PSI 5 min. 30 sec. (+10 sec.)

15 to 30 PSI 2 min. 50 sec. (+05 sec.)


0 to 30 PSI 6 min. 55 sec. (+15 sec.)

15 to 30 PSI 3 min. 30 sec. (+10 sec.)


0 to 30 PSI 7 min. 56 sec. (+15 sec.)

15 to 30 PSI 4 min. 09 sec. (+10 sec.)

RV Tire Fill Rates


80 to 90 PSI 49 sec. (+05 sec.)

90 to 110 PSI 5 min. 07 sec. (+10 sec.)

110 to 130 PSI 6 min. 19 sec. (+15 sec.)

RV Tire Fill Rates


80 to 90 PSI 49 sec. (+05 sec.)

90 to 110 PSI 5 min. 07 sec. (+10 sec.)

110 to 130 PSI 6 min. 19 sec. (+15 sec.)

Note: The 400P-RV-Automatic does not work with Presta bicycle valves.


Note: The 450P-Automatic does not work with Presta bicycle valves.

35 36


**

* *


FITTINGS

* NPT Fittings

Part No.

COMPRESSION FITTINGSDescription

9283692837 92838 92951

1/2" NPT male (1/2" airline)1/4" NPT male (1/4" airline)1/8" NPT female (1/4" airline) 1/8" NPT male (1/4" airline)

Part No.5 PC. 1/4" NPT PLUGS KIT

Description

90003 1/4" male recessed

Part No.REDUCERS

Description

92810928119281292840928419284292843

1/4" male to 1/4" male1/4" male to 1/8" male1/4" male to 1/8" female3/8" male to 1/4" male3/8" male to 1/4" female3/8" female to 1/4" male3/8" female to 1/4" female

* NPT Fittings

Pneumatic Accessories

* NPT Fittings

Part No.

1/4" QUICK CONNECTCOUPLERS

Description

9281392814

1/4" NPT male1/4" NPT female

Part No.

1/4" QUICK CONNECTSTUDS

Description

9281592818

1/4" NPT male1/4" NPT female

Part No.DRAIN COCK

Description

92835 1/4" NPT

Part No.

1/4" NPT SAFETY VALVESDescription

9214592155921759220592250

145 PSI coded155 PSI coded175 PSI coded205 PSI coded250 PSI coded

Part No.

INFLATION VALVEDescription

9283992839BP

Inflation ValveInflation Valve(Bulk Pack of 20 Pieces)

* For 1/4" air line

Part No.

5 PC. TANK PORTFITTINGS KIT

Description

9000590004

90002

Two plugs, drain cock, compression fitting, 250 PSI safety valve (90004), 175 PSI safety valve (90005). (All are 1/4" NPT)

Part No.

AIR LOCKER TANKPORT FITTINGS KIT

Description

900061/4" NPT(M) to 1/8" BSP(F) adaptor,1/4" NPT drain cock,1/4" NPT 250 PSI safety valve (P/N 90002),1/4" NPT 175 PSI safety valve (P/N 90006),1/4" NPT compression fitting,1/4" NPT plug.

Part No.

4-WAY FITTINGDescription

92855 1/4" male x 1/4" femalex 1/4" female x 1/8" female

Part No.T-FITTINGS

Description

92821

92846

92848

1/4" female x 1/4" femalex 1/8" female1/4" male x 1/4" femalex 1/8" female1/4" male x 1/4" femalex 1/4" female

* NPT Fittings

ONBOARD AIR HOOKUP KITSPart No. Description

200522005320055

30 amp - 110 PSI on, 145 PSI off30 amp - 85 PSI on, 105 PSI off30 amp - 90 PSI on, 120 PSI off

Custom designed to work with VIAIR compressors. Each comes with a pressure switch with built-in relay, an illuminated dash panel gauge with built-in ON/OFF switch, 20 ft. of positive extension wire, 20 ft. of air delivery line tubing, as well as parts needed to hook up to an air tank for convenient onboard air setup. * Gauge Tolerance: + 3 %

This gauge is for those who already have an onboard air setup, but wish to upgrade with a well-designed, high-quality 150 PSI or 200 PSI pressure monitor with a built-in ON/OFF switch to activate or deactivate compressors as needed. Included is an angled mounting bracket for easy viewing, electrical connectors, and a strip of continuous grommet. * Gauge Tolerance: + 3 %

ILLUMINATED DASH PANEL GAUGE KITPart No. Description

10061200622006520066

150 PSI - 20 amp - Black Face, Illuminated150 PSI - 30 amp - Black Face, Illuminated200 PSI - 30 amp - White Face, Illuminated200 PSI - 30 amp - Black Face, Illuminated

INSTALLATION ACCESSORIES

Part No.

SEALED PRESSURE SWITCHES

Description

9021290217902189021990220902219022390227

85 PSI on, 105 PSI off (30 Amp) * 110 PSI on, 145 PSI off (30 Amp) * 140 PSI on, 175 PSI off (20 Amp) * 140 PSI on, 175 PSI off (30 Amp) * 165 PSI on, 200 PSI off (20 Amp) * 165 PSI on, 200 PSI off (30 Amp) * 90 PSI on, 120 PSI off (30 Amp) * 110 PSI on, 145 PSI off (30 Amp) * *

Tolerance is + 5% of specified pressures. For 12-volt and 24-volt systems. * Comes with 1/8" NPT male port fitting * * Comes with 1/4" NPT male port fitting

Part No.

PRESSURE SWITCHWITH BUILT-IN RELAY

Description

85 PSI on, 105 PSI off110 PSI on, 145 PSI off90 PSI on, 120 PSI off

165 PSI on, 200 PSI off

Tolerance is + 5% of specified pressures. For 12-volt systems only up to 40 amps. Moisture resistant, measures 4.25"L x 2.25"W x 2.25"H, with 1/8" male NPT port. Leads clearly labeled.

PRESSURE SWITCHESPart No. Description

90 PSI on, 120 PSI off85 PSI on, 105 PSI off

110 PSI on, 145 PSI off165 PSI on, 200 PSI off

Tolerance is + 5% of specified pressures. For 12-volt and 24-volt systems up to 20 amps. Comes with 1/8" NPT male port fitting.

PRESSURE SWITCHES

ELECTRICAL ACCESSORIES

90110901119011390118

90100901019010290103

AIR ACCESSORIES

Part No.

AIRLINE CUTTERW/STAINLESS STEEL BLADE

Description

00020 Airline Tubing Cutter(up to 3/8" airline)

Part No.

AIR SOURCE RELOCATION KIT

Description

90007

Contains 1/4" NPT female quick connect coupler, 1/4" NPT female quick connect stud, two 1/4" NPT male compression fittings, 15ft. air line tubing, 3 air line clips, and 4" continuous grommet.

Part No. Description

90001 1/4" NPT Male to1/8" BSP Female Adapters

* Two Pack For air locker use.

BSP ADAPTERS


929319293292933

20-amp fuse30-amp fuse40-amp fuse* 5 pieces

FUSES

Part No.RELAYS

Description

93940939439397793979 93980

40-amp (40a - 12v)40-amp (40a - 24v)Heavy Duty 40-amp (40a - 12v)Heavy Duty 40-amp (40a - 24v)Heavy Duty 80-amp (80a - 12v)

* 93977* 93979 * 93980

* 93940 * 93943

Part No.

HEAVY DUTY FUSE HOLDERDescription

92952 60-amp / 8 gauge

* Moisture resistant* Fuse not included.

FUSE HOLDERPart No. Description

9294592946

20 to 30-amp / 16 gauge30 to 40-amp / 12 gauge

* Moisture resistant


FREEZE RESISTANT WIRE

92912

92918

12 gauge with 30 & 40-amp inline fuse holder (20 ft.)

16 gauge with 20-ampinline fuse holder (20 ft.)* -40°F to 158°F

Part No.INSULATED TERMINALS

Description

92920929219292292923

1/4" female / 12 gauge1/4" female / 16 gauge1/4" male / 12 gauge1/4" male / 16 gauge

* 5 pieces

NEW

37 38

Part No.RUBBER TIPPED BLOW GUN

Description

00045 Blow Gun

* With 1/4" Quick Connect Stud

NEW


Part No.

INLINE PRESSURE REGULATOR KIT

Description

90150

Regulate air pressure from an air tank to any pressure between 0-200 PSI. Uses: Locking differentials & air tools.

Features:

- 0-220 PSI gauge- Max. CFM Flow: 16 CFM- T-Fitting (Dual 1/4" NPT ports available – AIR OUT)- Compression fitting (for 1/4" air line – AIR IN)- Two BSP adapters (1/4" NPT (M) to 1/8" BSP (F))- 1/4" NPT Plug- Mounting Bracket

AIR ACCESSORIES

0-200 PSI0-160 PSI

Read pressures up to 200 PSI and 14 BAR. This useful tool features a normally-closed air chuck that can be opened by pressing the lever on the infla-tion gun. Because this air chuck is normally closed, the Tire Inflation Gun is a perfect com-pliment to onboard air systems and VIAIR’s line of "Portable Automatic" compressors. Comes with deluxe carry bag.

Part No.

TIRE INFLATION GUN

0004100046

Description

Part No.

DIGITAL TIRE INFLATION KIT

00044

Description

Part No.DIGITAL TIRE INFLATION GUN

00042

Description

Read pressures up to 180 PSI and 12 BAR, using the Digital Tire Pressure Gauge blue backlit digital display. A rubber overmold/surround serves to protect the gauge from impact damage. Also reads KG/CM & KPA scales. Comes with deluxe carry bag.

Read pressures up to 200 PSI and 14 BAR. The Digital Tire Inflation Kit features a normally-closed air gun that can be opened by simply squeezing the inflation trigger. Because this tool is a normally closed type, the Tire Inflation Gun works with all Onboard Air Systems with an air tank. The included blue backlit digital pressure gauge reads in PSI, BAR, KG/CM & KPA scales.

Part No.

TIRE INFLATION KIT

0004300047

Description

0-150 PSI0-200 PSI

Read pressures up to 200 PSI and 14 BAR. This Tire Inflation Kit features a normally-closed air gun that can be opened by simply squeezing the inflation trigger. Because this tool is a normally closed type, the Tire Inflation Gun works with all Onboard Air Systems with an air tank.

MOUNTING ACCESSORIES

Part No.

1.5" TIRE GAUGESDescription

9005590071

0-35 PSI0-100 PSI

Part No.

2.O" TIRE GAUGESDescription

9005690072

0-35 PSI0-100 PSI

* Bleeder valve

Part No.

2.O" TIRE GAUGEDescription

90058 0-15 PSI

* Rubber boot and bleeder valve

Part No.

2.5" TIRE GAUGES

900579005990073

* 12-inch hose, rubber boot, and storage pouch.

Description

0-35 PSI0-15 PSI0-100 PSI

Description

60 PSI Gauge

Part No.

3-IN-1 AIR DOWN GAUGE

00032

* Rapid hands-free air down adjustment with easy fine tuning.

GAUGES

Part No.

1.5" SINGLE NEEDLE GAUGE - 16O PSI

Description

9008490085

White FaceBlack Face

* Tolerance: + 3 %

* Tolerance: + 3 %

* Tolerance: + 1 PSI

* Tolerance: + 3 %

* Tolerance: + 3 %* Tolerance: + 3 %

* Tolerance: + 3 %

* Tolerance: + 1 PSI* Tolerance: + 3 %

* Tolerance: + 3 %

* Tolerance: + 3 %

* Tolerance: + 3 %

* Tolerance: + 3 %

* Tolerance: + 3 %

Part No.

2.O" DUAL NEEDLE GAUGE - 22O PSI

Description

9008090081

Black Face, IlluminatedWhite Face, Illuminated

Part No.

2.O" SINGLE NEEDLE GAUGE - 16O PSI

Description

9008790088

White Face, IlluminatedBlack Face, Illuminated

Part No.

2.O" DUAL NEEDLE GAUGE - 16O PSI

Description

9008290083

Black Face, IlluminatedWhite Face, Illuminated

Part No.

2.O" SINGLE NEEDLE GAUGE - 22O PSI

Description

9008990090

White Face, IlluminatedBlack Face, Illuminated

Part No.

6-PORT BILLET MANIFOLD & BRACKET

Description

92820 Bracket & mounting hardware included

60 PSI Gauge00033

P/N 00032

P/N 00033Part No.

Description

95900

Heavy duty universal compressor mounting bracket with stiffening gussets in black powder coat.

- Fits 280C to 480C Compressors- Replaces P/N 95901

MOUNTING BRACKET

Part No.

PORTABLE COMPRESSOR ADJUSTABLE TIE-DOWN STRAP

Description

00015 Secure your portable compressor. Complete with mounting hardware.

MOUNTING ACCESSORIES

Part No. DescriptionNEW

TIRE GAUGES

By adding additional cooling to a compressor the duty cycle can be increased up to 25%. Kits are offered in two different bracket sizes fitting a variety of compressors. The fan is IP68 rated and is available in 12-Volt and 24-Volt variants. Wiring kits are also available for Dual Pack compressor kits and Single compressor applications. Heavy Duty Vibration Isolators Kit included.

958109582095830958409581295824

12-Volt, Medium Bracket*12-Volt, Large Bracket**24-Volt, Medium Bracket*24-Volt, Large Bracket**12-Volt, Cooling Fan***24-Volt, Cooling Fan***

* Fits VIAIR Compressor 280C through 420C ** Fits VIAIR Compressor 444C and larger*** Cooling Fan only: 80mm x 80mm x 25mm, 3800rpm

COOLING FAN - VIBRATION ISOLATOR KIT

NEW

39 40

All fittings have NPT thread on one side and JIC thread on the other.

VIAIR Corporation Manufacturer Defect Warranty:VIAIR Corporation warrants this product to the end-user, when properly installed and under normal conditions of use, to be free from defects in workmanship and materials for a period of one year from the provided date of purchase for the original purchaser of the product. This warranty does not cover abuse, operation in a manner inconsistent with the product’s design, or damage resulting from exposure to the elements. If the defect is considered "under warranty", VIAIR will, at its option, repair or replace the product free of charge to the person who purchased the product.

More information: www.viaircorp.com/warranty

P/N 00029


92789

92790

1/4" male to 1/4" male swivel w/ check valve3/8" male to 3/8" male swivel w/ check valve

20"

24"

Part No. Description Length

STAINLESS STEEL BRAIDED PTFE-LINED LEADER HOSES WITH CHECK VALVES

92791

92793

92805

92807

3/8" fitting with check valve (3/8" male to 3/8" male swivel) 1/4" fitting with check valve (1/4" male to 1/4" male swivel) 1/4" fitting with check valve (1/4" male to 1/4" male swivel) 1/8" male to 1/4" male swivel w/ check valve

24"

21"

36"

20"


STAINLESS STEEL BRAIDED LEADER HOSES WITH CHECK VALVES

Length

92792

92795

9280192802928039280492809

3/8" fitting (3/8" male to 3/8" male swivel) 3/8" fitting (3/8" female to 3/8" male swivel) 1/8" male to 1/4" female swivel 1/4" male to 1/4" female swivel 1/8" male to 1/4" male swivel 1/4" male to 1/4" male swivel 1/4" male to 1/4" male swivel

24"

24"

18"18"18"18"36"


STAINLESS STEEL BRAIDED LEADER HOSES WITHOUT CHECK VALVES

CHECK VALVESPart No. Description

92823

92824

92825

928319283292833

1/8" male to 1/8" femaleO.D. 12mm1/8" male to 1/8" femaleO.D. 16mm1/8" female to 1/8" maleO.D. 16mm1/4" female to 1/4" male1/4" male to 1/4" female3/8" female to 3/8" male

AIR HOSES, LEADER HOSES, & CHECK VALVES

Part No.

BUDDY HELPER 35 FT. COIL HOSEDescription

00037

00039

1/4" NPT male swivelw/ clip-on tire chuck(hose rated to 200 PSI)

Inside Braided Black Coil Hose1/4" NPT male swivelw/ clip-on tire chuck(hose rated to 200 PSI)

3O FT. EXTENSION HOSEPart No. Description

00030

00031

0-200 PSIClose-ended 1/4" Quick Connect Coupler & StudDeluxe Carry Bag

Inside Braided Black Coil Hose0-200 PSIClose-ended 1/4" Quick Connect Coupler & StudDeluxe Carry Bag

P/N 00031

P/N 00037

6 FT. PORTABLE COMPRESSOR AIR EXTENSION HOSEPart No. Description

00016 8V1 (M) x 8V1 (F)

5-IN-1 INLINE INFLATION/DEFLATION COIL HOSES


00025

00027

00029

100 PSI gauge w/ polyurethane coil hose

60 PSI gauge w/ braided coil hose

120 PSI gauge w/ braided coil hose

Coil Hose with inline inflator/deflator pressure gauge 3-piece inflation tips kit quick connect stud storage bag. (25ft. hose rated to 200 PSI) For use with portable compressors and "H" model compressors. Not for use with air tanks, these P/N's feature an open-ended air chuck.

• Continuous Inflation/Deflation• Intermittent Deflation• 1/4" NPT Male Quick Connect Stud• 3-pc. Inflation Tips Kit

P/N 00025

O.5 GALLON AIR TANK - 15O PSIPart No. Description

91005 Two 1/4" NPT ports - 150 PSI

Dimensions: 6"L x 6.5"W x 7"HNet Weight: 4.45 lbs.

1.O GALLON AIR TANK - 15O PSI


9101091014

Two 1/4" NPT ports - 150 PSIFour 1/4" NPT ports - 150 PSI

Dimensions: 10.25"L x 6"W x 7.5"HP/N 91010 Net Weight: 5.5 lbs.P/N 91014 Net Weight: 7.0 lbs.

2.5 GALLON AIR TANK - 15O PSI 5.O GALLON AIR TANK - 15O PSI

Part No. Part No.Description Description

91025 91050Six 1/4" NPT ports - 150 PSI Two 1/4" NPT ports - 150 PSITwo 3/8" NPT ports - 150 PSI

Dimensions: 23.5"L x 6"W x 7.5"HNet Weight: 14.05 lbs.


2.O GALLON AIR TANK - 15O PSIPart No. Description

91022 Six 1/4" NPT ports - 150 PSI

Dimensions: 19"L x 6"W x 7.5"HNet Weight: 11.95 lbs.

2.5 GALLON AIR TANK - 2OO PSIPart No. Description

91028 Six 1/4" NPT ports - 200 PSI


Reservoir tanks are available in six different sizes ranging from 0.5 gallons to 5.0 gallons. VIAIR tanks are rated to either 150 PSI or 200 PSI maximum working pressure and equipped with either 1/4" NPT and/or 3/8" NPT ports in various configurations. All air tanks are coated to resist rusting and oxidation. All tanks come with mounting hardware included.

AIR TANKS

REMOTE INLET AIR FILTER ASSEMBLIESPart No. Description

92619926219262292625

1/8" NPT x 1/4" tube1/4" NPT x 1/4" tube1/4" NPT x 3/8" tube3/8" NPT x 1/2" tube

METAL REMOTE INLET AIR FILTER ASSEMBLIESPart No. Description

9262992631

3/8" NPT x 1/2" tube1/4" NPT x 3/8" tube

DIRECT INLETAIR FILTER ASSEMBLIESPart No. Description

9262092623926249263392634

1/8" NPT - Gray1/4" NPT - Gray3/8" NPT - Gray1/4" NPT - Black3/8" NPT - Black

METAL DIRECT INLETAIR FILTER ASSEMBLIESPart No. Description

92627926309263592636

3/8" NPT - Silver1/4" NPT - Silver1/2" NPT - Silver3/8" NPT - Black

2-STAGEAIR FILTER ELEMENTSPart No. Description Application

92618926269262892595

Qty: 5Qty. 5Qty. 4Qty. 4

1/8" NPT Plastic HousingsAll Plastic Housings1/4" or 3/8" NPT Metal Housings1/2" NPT Metal Housings

FILTER ASSEMBLIES

* All fittings have NPT thread on one side and JIC thread on the other.

* All fittings are NPT thread.


* Tolerance: + 3 %

92796

92797

1/4" fitting with check valve (1/4" male to 1/4" male swivel) 3/8" fitting with check valve (3/8" male to 3/8" male swivel)

24"

24"


BLACK SLEEVED STAINLESS STEEL BRAIDED LEADER HOSES WITH CHECK VALVES


P/N 00030

P/N 00039

NEW

NEW

41 42

LED

LIG

HT

ING

44

POP DEMOCOUNTERTOP/ WALL DISPLAYS

→→

FOR OFF ROAD USE ONLY. Patents Pending.

WURTON is the leading manufacturer of high performance LED lighting products, which are built for the most demanding consumers in the Off Road & Industrial markets. Our products are engineered using the most advanced manufacturing technology available today, resulting in unparalleled quality, and extreme off-road durability. WURTON handles Product Engineering, Design, Marketing, Sales & Distribution from our headquarters in Orange County, California where the future of the high performance lighting industry is being transformed.

HIGH PERFORMANCEOFF ROAD LED

LIGHTING

Specifications: Rated for 10 to 30-volt Operation 5-Watt and 10-Watt LEDs Light Color: 5,700 to 6,500 Kelvin 50,000-Hour LED Bulb Life Expectancy* Beam Patterns Available in Spot, Flood, Diffused & Combo IP68 Rated for Dust & Moisture Intrusion Resistance

Limited Lifetime Warranty

APPRECIATE THE LIGHT

JEEP JK STOCK HEADLIGHTS 10-WATT 50" WURTON LIGHT BAR

where visibility matters:

* Based on LED Manufacturer Specifications.

Limited Lifetime Warranty

LED

LIG

HT

ING

46

LED

LIG

HT

ING

45

Features:


DIFFUSEDFLOODSPOT


Rated for 10-volt to 30-volt Operation 5-Watt LEDs (493 Raw Lumens per LED) IP68 Rated for Dust & Moisture Ingress Protection Beam Patterns Available in Spot, Flood & Combo 50,000-Hour LED Bulb Life Expectancy* Adjustable Mounting Bracket Included Stainless Steel Hardware Limited Lifetime Warranty

Size Available Beam Pattern # of LEDs Amp Draw Raw Lumens*

6" Spot (P/N 30611), Flood (P/N 30621) 8 1.5 3,900

10" Spot (P/N 31011), Flood (P/N 31021) 16 3.0 7,800

14" Spot (P/N 31411), Flood (P/N 31421) 24 4.5 11,800

22" Combo (Spot / Flood) (P/N 32241) 40 7.5 19,700




HIGH POWERLED LIGHT BARSSEE P/N BELOW:

WURTON High Power LED lighting products outshine the rest, with quality that can’t be beat. Ranging in size from 6 inches to 50 inches and raw lumens (light output) from 3,900 to 47,300 maximum, WURTON lighting is the most powerful and reliable product that is IP68 rated for dust and moisture ingress protection.

P/N 30611

P/N 31011

P/N 33041


Features:

Available in Single or Dual Pack Rated for 10-volt to 30-volt Operation 5-Watt LEDs (493 Raw Lumens per LED) IP68 Rated for Dust & Moisture Intrusion Resistance Beam Patterns Available in Spot, Flood & Diffused 50,000-Hour LED Bulb Life Expectancy* Adjustable Mounting Bracket Included Stainless Steel Hardware Polycarbonate Primary Lens

HIGH POWERLED CUBE LIGHT

introducing:

High Power LED Cube Light

WURTON, the leading manufacturer of automotive, off road & industrial LED lighting products, is proud to introduce the SCOUT High Power LED Cube Light. IP68 rated for dust and moisture intrusion, 1,970 Raw lumens and available in Spot, Flood or Diffused beam patterns, SCOUT goes Where Visibility Matters.

SEE P/N BELOW:

SCOUT Single P/N Beam Pattern # of LEDs Amp Draw Raw Lumens

34041 Spot 4 1.2 1,970

34042 Flood 4 1.2 1,970

34043 Diffused 4 1.2 1,970

SCOUT Dual P/N Beam Pattern # of LEDs Amp Draw Raw Lumens

38041 Spot 8 (Total) 2.4 3,940

38042 Flood 8 (Total) 2.4 3,940

38043 Diffused 8 (Total) 2.4 3,940

P/N 34041

LED

LIG

HT

ING

48

LED

LIG

HT

ING

47

SPOT BEAM PATTERN FLOOD BEAM PATTERN COMBO BEAM PATTERN

Full Length Secondary Lens Covers Included3

P/N 21181

P/N 21182

INTEGRATED SNAP-ON SECONDARY LENS COVERS INCLUDED3

12

3


* * only included with 10-WATT Light Bars

Size Available Beam Pattern # of LEDs Amp Draw Raw Lumens Housing Length

5" Spot (P/N 21051), Flood (P/N 21052) 2 1.5 2,000 4.65"Dual 5" Spot (P/N 22051), Flood (P/N 22052) 4 Total 3.0 Total 4,000 Total 4.65"

8" Spot (P/N 21081), Flood (P/N 21082) 4 3.0 4,000 8.19"12" Spot (P/N 21121), Flood (P/N 21122) 6 4.5 6,000 11.73"18" Spot (P/N 21181), Flood (P/N 21182) 10 7.5 10,000 18.82"26" Combo (Spot / Flood) (P/N 21263) 14 10.5 14,000 25.91"30" Combo (Spot / Flood) (P/N 21303) 16 12.0 16,000 29.45"36" Combo (Spot / Flood) (P/N 21363) 20 15.0 20,000 36.54"40" Combo (Spot / Flood) (P/N 21403) 22 16.5 22,000 40.08"44" Combo (Spot / Flood) (P/N 21443) 24 18.0 24,000 43.62"48" Combo (Spot / Flood) (P/N 21483) 26 19.5 26,000 47.17"50" Combo (Spot / Flood) (P/N 21503) 28 21.0 28,000 50.71"

WURTON High Performance LED lighting products feature the most powerful LEDs in the industry, with light output that is unsurpassed. With light bar lengths from 5 inches to 50 inches and raw lumens (light output) from 2,000 to 28,000 maximum, WURTON lighting provides the brightest output of any off road LED lighting product with an average life expectancy of 50,000 hours.

SEE P/N BELOW:

HIGH PERFORMANCELED LIGHT BARS

Features: Rated for 10 to 30-volt Operation 10-Watt LEDs (1,000 Raw Lumens per LED) Light Color: 5,700 to 6,500 Kelvin Spot, Flood and Combo Beam Patterns 16-inch Lead Wiring w/ Deutsch Connector* 50,000-Hour LED Bulb Life Expectancy* IP68 Rated for Dust & Moisture Ingress Protection

* Based on LED Manufacturer Specifications.* * Older models may contain Delphi connector.

Secondary Lens Cover Advantage

Size Clear Amber Black

5" 85051 85052 850538" 85081 85082 85083

12" 85121 85122 8512318" 85181 85182 8518326" 85261 85262 8526330" 85301 85302 8530336" 85361 85362 8536340" 85401 85402 8540344" 85441 85442 8544348" 85481 85482 8548350" 85501 85502 85503

WURTON polycarbonate secondary covers are designed for added protection for your 10-Watt WURTON LED light bars.

10-Watt Replacement Lens Covers

SEE P/N BELOW:

The clear secondary cover protects your primary lens from rocks, sand and other debris.

The amber secondary cover provides improved visibility in dust, fog and snow.

The black secondary cover not only provides additional protection, but also meets most states’ D.O.T. regulations* that require auxiliary lights to be covered while on public streets.

1

2

3

* Please check your local off road lighting laws/regulations for further information.

LED

LIG

HT

ING

50

LED

LIG

HT

ING

49

WA

TT


mounting brackets & electrical accessories

Jeep Windshield Brackets P/N 86510 - 07-14 JK - Made from 3/16" Steel

- Powder Coated Satin Black- Rubber Gasket for Paint Protection- Mounts 50" Wurton Light to Jeep - Uses Factory Windshield Hardware- Sold as Pair

For use on WURTON Light Bars Only. Cannot guarantee

proper fitment on other manufacturers’ light bars.

40 Amp5-Prong Relay P/N 82710 - Metal Mounting Tab - Use to Power 1 or 2 Lights

Dual LightWiring Kit P/N 87120 - Sealed 30A Toggle Switch - 40A 5-Prong Relay - 15ft. 12 Gauge Red Wire with Inline Fuse Holder- 6ft. 12 Gauge Black Wire - 10A & 30A Blade Fuse - Electrical Connectors - Shrink Tubing- Zip Ties

Single LightWiring Kit P/N 87110 - Sealed 30A Toggle Switch - 15ft. 12 Gauge Red Wire with Inline Fuse Holder- 6ft. 12 Gauge Black Wire - 10A & 30A Blade Fuse - Electrical Connectors - Shrink Tubing- Zip Ties

Tube Clamp Brackets P/N 86210 - Fits 1.25" Tube P/N 86220 - Fits 1.50" Tube P/N 86230 - Fits 1.75" Tube - Billet Aluminum - Natural Finish - Stainless Hardware - Sold as Pair

U-CradleBracket P/N 86240 - Fits 5" Light P/N 86245 - Fits 8" Light P/N 86250 - Fits 12" Light - Made from 3/16" Steel - Powder Coated Satin Black - Includes Carriage Mounting Bolt - Sold Individually

Flat SurfaceBrackets P/N 86110 - Fits 5"- 50" Lights - Die-Cast Aluminum - Powder Coated Satin Black - Stainless Steel Mounting Hardware Included with Nylon Nut Inserts - Sold as Pair

Mounting Bracketbolt hardware kit P/N 87620 - (4) Mounting Bolts - (4) Locking Nuts

Housing MountingBolt Hardware Kit P/N 87610 - Direct Replacement for WURTON Factory Housing to Bracket Bolts - Stainless Steel - M8 Mounting Bolts - Delrin Washers

Mounting DelrinWasher Pack P/N 87642 - (4) Delrin Washers

WURTON Pod Lights feature three, 1-watt LED lights mounted in a sealed polycarbonate housing that is attached to a black electro-coated metal base. Each Pod Light is attached to a 12-foot wiring harness for ease of installation. All WURTON Pod Lights come with all connectors needed for installation as well as stainless steel mounting hardware. Use them for your off road rig to illuminate the corners of your vehicle when off road after dusk, or for any vehicle where added light is desired.

P/N 20031

HIGH POWERPOD LIGHTS 1 Pair (2 Lights) High Power Pod Lights

Each Light Contains Three 1-Watt LEDs Stainless Steel Hardware Included 12ft. Lead Wires Includes Electrical Connectors 4 Stainless Steel Bezels & 4 Foam Gaskets 12-volt / Max. Amp Draw Per Pair: 3 amps

For 12V Use Only

Features:

(2) Pod Lights (4) 1.5mm thickness stainless bezels (6) M3 mounting bolt (6) Nylock nut (4) Male connector (4) Female connector (2) Ring Terminal (4) 2mm EVA gasket (1) 180 cm 18awg black wire

Parts Included:

P/N SMA-01

WURTON15 Edelman | Irvine, CA 92618

Ph. 949-753-6006 | Fx. 949-753-0968www.WURTON.com

VIAIR CORPORATION15 Edelman | Irvine, CA 92618Ph. 949-585-0011 | Fx. 949-585-0188www.VIAIRCORP.com

VOLUME 21

AIR COMPRESSORS, PNEUMATIC SYSTEMS OFF ROAD LED LIGHTING & ACCESSORIES

volume 21 - adventech 4x4

Documents