permit number: 21-02188

Harrison Acute Care Expansion SECTION 087100 DOOR HARDWARE RFI – 1772 February 04, 2020

DOOR HARDWARE 087100 - 1

SECTION 087100 – DOOR HARDWARE

PART 1 - GENERAL

1.1 RELATED DOCUMENTS

A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification Sections, apply to this Section.

1.2 SUMMARY

A. This Section includes commercial door hardware for the following:

1. Swinging doors. 2. Sliding doors. 3. Other doors to the extent indicated.

B. Door hardware includes, but is not necessarily limited to, the following:

1. Mechanical door hardware. 2. Electromechanical door hardware. 3. Automatic operators. 4. Cylinders specified for doors in other sections.

C. Standards: All hardware specified herein shall comply with the following industry standards:

1. ANSI/BHMA Certified Product Standards - A156 Series 2. UL10C – Positive Pressure Fire Tests of Door Assemblies

1.3 SUBMITTALS

A. Product Data: Manufacturer's product data sheets including installation details, material descriptions, dimensions of individual components and profiles, operational descriptions and finishes.

B. Door Hardware Schedule: Prepared by or under the supervision of supplier, detailing fabrication and assembly of door hardware, as well as procedures and diagrams. Coordinate the final Door Hardware Schedule with doors, frames, and related work to ensure proper size, thickness, hand, function, and finish of door hardware.

1. Format: Comply with scheduling sequence and vertical format in DHI's "Sequence and Format for the Hardware Schedule."

jessicalmartinez

Permit Number Batch



2. Organization: Organize the Door Hardware Schedule into door hardware sets indicating complete designations of every item required for each door or opening. Organize door hardware sets in same order as in the Door Hardware Sets at the end of Part 3. Submittals that do not follow the same format and order as the Door Hardware Sets will be rejected and subject to resubmission.

3. Content: Include the following information:

a. Type, style, function, size, label, hand, and finish of each door hardware item.

b. Manufacturer of each item. c. Fastenings and other pertinent information. d. Location of door hardware set, cross-referenced to Drawings, both on

floor plans and in door and frame schedule. e. Explanation of abbreviations, symbols, and codes contained in

schedule. f. Mounting locations for door hardware. g. Door and frame sizes and materials. h. Warranty information for each product.

4. Submittal Sequence: Submit the final Door Hardware Schedule at earliest possible date, particularly where approval of the Door Hardware Schedule must precede fabrication of other work that is critical in the Project construction schedule. Include Product Data, Samples, Shop Drawings of other work affected by door hardware, and other information essential to the coordinated review of the Door Hardware Schedule.

C. Shop Drawings: Details of electrified access control hardware indicating the following:

1. Wiring Diagrams: Upon receipt of approved schedules, submit detailed system wiring diagrams for power, signaling, monitoring, communication, and control of the access control system electrified hardware. Differentiate between manufacturer-installed and field-installed wiring. Include the following:

a. Elevation diagram of each unique access controlled opening showing location and interconnection of major system components with respect to their placement in the respective door openings.

b. Complete (risers, point-to-point) access control system block wiring diagrams.

c. Wiring instructions for each electronic component scheduled herein.

2. Electrical Coordination: Coordinate with related sections the voltages and wiring details required at electrically controlled and operated hardware openings.

D. Keying Schedule: After a keying meeting with the owner has taken place prepare a separate keying schedule detailing final instructions. Submit the keying schedule in electronic format. Include keying system explanation, door numbers, key set symbols, hardware set numbers and special instructions. Owner must approve submitted keying schedule prior to the ordering of permanent cylinders/cores.

jessicalmartinez

Permit Number Batch



E. Informational Submittals:

1. Product Test Reports: Indicating compliance with cycle testing requirements, based on evaluation of comprehensive tests performed by manufacturer and witnessed by a qualified independent testing agency.

F. Operating and Maintenance Manuals: Provide manufacturers operating and maintenance manuals for each item comprising the complete door hardware installation in quantity as required in Division 01, Closeout Submittals.

1.4 QUALITY ASSURANCE

A. Manufacturers Qualifications: Engage qualified manufacturers with a minimum 5 years of documented experience in producing hardware and equipment similar to that indicated for this Project and that have a proven record of successful in-service performance.

B. Installer Qualifications: A minimum 3 years documented experience installing both standard and electrified door hardware similar in material, design, and extent to that indicated for this Project and whose work has resulted in construction with a record of successful in-service performance.

C. Door Hardware Supplier Qualifications: Experienced commercial door hardware distributors with a minimum 5 years documented experience supplying both mechanical and electromechanical hardware installations comparable in material, design, and extent to that indicated for this Project. Supplier recognized as a factory direct distributor by the manufacturers of the primary materials with a warehousing facility in Project's vicinity. Supplier to have on staff a certified Architectural Hardware Consultant (AHC) available during the course of the Work to consult with Contractor, Architect, and Owner concerning both standard and electromechanical door hardware and keying.

D. Source Limitations: Obtain each type and variety of door hardware specified in this section from a single source unless otherwise indicated.

1. Electrified modifications or enhancements made to a source manufacturer's product line by a secondary or third party source will not be accepted.

2. Provide electromechanical door hardware from the same manufacturer as mechanical door hardware, unless otherwise indicated.

E. Each unit to bear third party permanent label demonstrating compliance with the referenced standards.

F. Keying Conference: Conduct conference to comply with requirements in Division 01 Section "Project Meetings." Keying conference to incorporate the following criteria into the final keying schedule document:

1. Function of building, purpose of each area and degree of security required.

jessicalmartinez

Permit Number Batch



2. Plans for existing and future key system expansion. 3. Requirements for key control storage and software. 4. Installation of permanent keys, cylinder cores and software. 5. Address and requirements for delivery of keys.

G. Pre-Submittal Conference: Conduct coordination conference in compliance with requirements in Division 01 Section "Project Meetings" with attendance by representatives of Supplier(s), Installer(s), and Contractor(s) to review proper methods and the procedures for receiving, handling, and installing door hardware.

1. Prior to installation of door hardware, conduct a project specific training meeting to instruct the installing contractors' personnel on the proper installation and adjustment of their respective products. Product training to be attended by installers of door hardware (including electromechanical hardware) for aluminum, hollow metal and wood doors. Training will include the use of installation manuals, hardware schedules, templates and physical product samples as required.

2. Inspect and discuss electrical roughing-in, power supply connections, and other preparatory work performed by other trades.

3. Review sequence of operation narratives for each unique access controlled opening.

4. Review and finalize construction schedule and verify availability of materials. 5. Review the required inspecting, testing, commissioning, and demonstration

procedures

H. At completion of installation, provide written documentation that components were applied to manufacturer's instructions and recommendations and according to approved schedule.

1.5 DELIVERY, STORAGE, AND HANDLING

A. Inventory door hardware on receipt and provide secure lock-up and shelving for door hardware delivered to Project site. Do not store electronic access control hardware, software or accessories at Project site without prior authorization.

B. Tag each item or package separately with identification related to the final Door Hardware Schedule, and include basic installation instructions with each item or package.

C. Deliver, as applicable, permanent keys, cylinders, cores, access control credentials, software and related accessories directly to Owner via registered mail or overnight package service. Instructions for delivery to the Owner shall be established at the "Keying Conference".

1.6 COORDINATION

A. Templates: Obtain and distribute to the parties involved templates for doors, frames, and other work specified to be factory prepared for installing standard and electrified

jessicalmartinez

Permit Number Batch



hardware. Check Shop Drawings of other work to confirm that adequate provisions are made for locating and installing hardware to comply with indicated requirements.

B. Door Hardware and Electrical Connections: Coordinate the layout and installation of scheduled electrified door hardware and related access control equipment with required connections to source power junction boxes, low voltage power supplies, detection and monitoring hardware, and fire and detection alarm systems.

C. Door and Frame Preparation: Doors and corresponding frames are to be prepared, reinforced and pre-wired (if applicable) to receive the installation of the specified electrified, monitoring, signaling and access control system hardware without additional in-field modifications.

1.7 WARRANTY

A. General Warranty: Reference Division 01, General Requirements. Special warranties specified in this Article shall not deprive Owner of other rights Owner may have under other provisions of the Contract Documents and shall be in addition to, and run concurrent with, other warranties made by Contractor under requirements of the Contract Documents.

B. Warranty Period: Written warranty, executed by manufacturer(s), agreeing to repair or replace components of standard and electrified door hardware that fails in materials or workmanship within specified warranty period after final acceptance by the Owner. Failures include, but are not limited to, the following:

1. Structural failures including excessive deflection, cracking, or breakage. 2. Faulty operation of the hardware. 3. Deterioration of metals, metal finishes, and other materials beyond normal

weathering. 4. Electrical component defects and failures within the systems operation.

C. Standard Warranty Period: One year from date of Substantial Completion, unless otherwise indicated.

D. Special Warranty Periods:

1. Ten years for mortise locks and latches. 2. Five years for exit hardware. 3. Twenty five years for manual surface door closer bodies. 4. Five years for motorized electric latch retraction exit devices. 5. Two years for electromechanical door hardware.

1.8 MAINTENANCE SERVICE

A. Maintenance Tools and Instructions: Furnish a complete set of specialized tools and maintenance instructions as needed for Owner's continued adjustment, maintenance, and removal and replacement of door hardware.

jessicalmartinez

Permit Number Batch



PART 2 - PRODUCTS

2.1 SCHEDULED DOOR HARDWARE

A. General: Provide door hardware for each door to comply with requirements in Door Hardware Sets and each referenced section that products are to be supplied under.

B. Designations: Requirements for quantity, item, size, finish or color, grade, function, and other distinctive qualities of each type of door hardware are indicated in the Door Hardware Sets at the end of Part 3. Products are identified by using door hardware designations, as follows:

C. Named Manufacturer's Products: Product designation and manufacturer are listed for each door hardware type required for the purpose of establishing requirements. Manufacturers' names are abbreviated in the Door Hardware Schedule.

D. Substitutions: Requests for substitution and product approval for inclusive mechanical and electromechanical door hardware in compliance with the specifications must be submitted in writing and in accordance with the procedures and time frames outlined in Division 01, Substitution Procedures. Approval of requests is at the discretion of the architect, owner, and their designated consultants.

2.2 HANGING DEVICES

A. Hinges: ANSI/BHMA A156.1 certified butt hinges with number of hinge knuckles and other options as specified in the Door Hardware Sets.

1. Quantity: Provide the following hinge quantity:

a. Two Hinges: For doors with heights up to 60 inches. b. Three Hinges: For doors with heights 61 to 90 inches. c. Four Hinges: For doors with heights 91 to 120 inches. d. For doors with heights more than 120 inches, provide 4 hinges, plus 1

hinge for every 30 inches of door height greater than 120 inches.

2. Hinge Size: Provide the following, unless otherwise indicated, with hinge widths sized for door thickness and clearances required:

a. Widths up to 3’0”: 4-1/2” standard or heavy weight as specified. b. Sizes from 3’1” to 4’0”: 5” standard or heavy weight as specified.

3. Hinge Weight and Base Material: Unless otherwise indicated, provide the following:

a. Exterior Doors: Heavy weight, non-ferrous, ball bearing or oil impregnated bearing hinges unless Hardware Sets indicate standard weight.

jessicalmartinez

Permit Number Batch



b. Interior Doors: Standard weight, steel, ball bearing or oil impregnated bearing hinges unless Hardware Sets indicate heavy weight.

4. Hinge Options: Comply with the following:

a. Non-removable Pins: Provide set screw in hinge barrel that, when tightened into a groove in hinge pin, prevents removal of pin while door is closed; for the all out-swinging lockable doors.

5. Acceptable Manufacturers:

a. Hager Companies (HA). b. Ives (IV). c. McKinney Products (MK).

B. Pin and Barrel Continuous Hinges: ANSI/BHMA A156.26 Grade 1-600 certified pin and barrel continuous hinges with minimum 14 gauge Type 304 stainless steel hinge leaves, concealed teflon coated stainless pin, and twin self lubricated nylon bearings at each knuckle separation. Factory trim hinges to suit door height and prepare for electrical cut-outs.


a. Hager Companies (HA). b. Markar Products (MR). c. Pemko Manufacturing (PE). d. Stanley Commerical (ST).

2.3 POWER TRANSFER DEVICES

A. Concealed Quick Connect Electric Power Transfers: Provide concealed wiring pathway housing mortised into the door and frame for low voltage electrified door hardware. Furnish with Molex™ standardized plug connectors and sufficient number of concealed wires (up to 12) to accommodate the electrified functions specified in the Door Hardware Sets. Connectors plug directly to through-door wiring harnesses for connection to electric locking devices and power supplies. Wire nut connections are not acceptable.


a. Pemko Products; (PE) – EL-CEPT Series. b. Securitron (SU) - EL-CEPT Series. c. Von Duprin (VD) - EPT-10 Series. d. Precision (PR) – EPT-10C Series.

B. Electric Door Wire Harnesses: Provide electric/data transfer wiring harnesses with standardized plug connectors to accommodate up to twelve (12) wires. Connectors plug directly to through-door wiring harnesses for connection to electric locking devices and power supplies. Provide sufficient number and type of concealed wires to accommodate electric function of specified hardware. Provide a connector for through-door electronic

jessicalmartinez

Permit Number Batch



locking devices and from hinge to junction box above the opening. Wire nut connections are not acceptable. Determine the length required for each electrified hardware component for the door type, size and construction, minimum of two per electrified opening.

1. Provide one each of the following tools as part of the base bid contract: a. McKinney Products; (MK) - Electrical Connecting Kit: QC-R001. b. McKinney Products; (MK) - Connector Hand Tool: QC-R003.


a. McKinney Products; (MK) – QC-C Series. b. Stanley Quick Connect (ST)

C. Provide mortar guard enclosure on steel frames installed at masonry openings for each electrical hinge specified.

2.4 DOOR OPERATING TRIM

A. Flush Bolts and Surface Bolts: ANSI/BHMA A156.3 and A156.16, Grade 1, certified.

1. Flush bolts to be furnished with top rod of sufficient length to allow bolt retraction device location approximately six feet from the floor.

2. Furnish dust proof strikes for bottom bolts. 3. Surface bolts to be minimum 8” in length and U.L. listed for labeled fire doors and

U.L. listed for windstorm components where applicable. 4. Provide related accessories (mounting brackets, strikes, coordinators, etc.) as

required for appropriate installation and operation.


a. Door Controls International (DC). b. Rockwood Products; (RO). c. Trimco (TC).

B. Door Push Plates and Pulls: ANSI/BHMA A156.6 certified door pushes and pulls of type and design specified in the Hardware Sets. Coordinate and provide proper width and height as required where conflicting hardware dictates.

1. Push/Pull Plates: Minimum .050 inch thick, size as indicated in hardware sets, with beveled edges, secured with exposed screws unless otherwise indicated.

2. Door Pull and Push Bar Design: Size, shape, and material as indicated in the hardware sets. Minimum clearance of 2 1/2-inches from face of door unless otherwise indicated.

3. Offset Pull Design: Size, shape, and material as indicated in the hardware sets. Minimum clearance of 2 1/2-inches from face of door and offset of 90 degrees unless otherwise indicated.

4. Fasteners: Provide manufacturer's designated fastener type as indicated in Hardware Sets.

jessicalmartinez

Permit Number Batch




a. Ives (IV). b. Rockwood Manufacturing (RO). c. Trimco (TC).

2.5 CYLINDERS AND KEYING

A. General: Cylinder manufacturer to have minimum (10) years experience designing secured master key systems and have on record a published security keying system policy.


a. Schlage (SC). b. Best (BE). c. Corbin Russwin (RU). d. Sargent (SA).

B. Cylinders: Original manufacturer cylinders complying with the following:

1. Mortise Type: Threaded cylinders with rings and cams to suit hardware application. 2. Rim Type: Cylinders with back plate, flat-type vertical or horizontal tailpiece, and

raised trim ring. 3. Bored-Lock Type: Cylinders with tailpieces to suit locks. 4. Mortise and rim cylinder collars to be solid and recessed to allow the cylinder face

to be flush and be free spinning with matching finishes. 5. Keyway: As selected by Owner.

C. Permanent Cores: Manufacturer's standard; finish face to match lockset; complying with the following:

1. Removable Cores: Core insert, removable by use of a special key, and for use with

only the core manufacturer's cylinder and door hardware. Provide removable core (large or small format) as specified in Hardware Sets.

D. Patented Cylinders: ANSI/BHMA A156.5, Grade 1, certified patented cylinders employing a utility patented and restricted keyway requiring the use of a patented key. Cylinders are to be protected from unauthorized manufacture and distribution by manufacturer’s United States patents. Cylinders are to be factory keyed with owner having the ability for on-site original key cutting.


a. Schlage (SC). b. Best (BE). c. Corbin Russwin (RU). d. Sargent (SA).

jessicalmartinez

Permit Number Batch



E. Keying System: Each type of lock and cylinders to be factory keyed.

1. Conduct specified "Keying Conference" to define and document keying system instructions and requirements.

2. Furnish factory cut, nickel-silver large bow permanently inscribed with a visual key control number as directed by Owner.

3. Existing System: Key locks to Owner's existing system.

F. Key Quantity: Provide the following minimum number of keys:

1. Change Keys per Cylinder: Two (2) 2. Master Keys (per Master Key Level/Group): Five (5). 3. Construction Keys (where required): Ten (10). 4. Construction Control Keys (where required): Two (2). 5. Permanent Control Keys (where required): Two (2).

G. Construction Keying: Provide construction master keyed cylinders.

H. Key Registration List (Bitting List):

1. Provide keying transcript list to Owner's representative in the proper format for importing into key control software.

2. Provide transcript list in writing or electronic file as directed by the Owner.

I. Key Control Software: Provide one network version of "Key Wizard" branded key management software package that includes one year of technical support and upgrades to software at no charge. Provide factory key system formatted for importing into “Key Wizard” software.


a. Lund Equipment (LU). b. MMF Industries (MM). c. Telkee (TK).

J. Key Control Software: Provide one network version of "Key Wizard" branded key management software package that includes one year of technical support and upgrades to software at no charge. Provide factory key system formatted for importing into “Key Wizard” software.

2.6 MECHANICAL LOCKS AND LATCHING DEVICES

A. Mortise Locksets, Grade 1 (Heavy Duty): ANSI/BHMA A156.13, Series 1000, Operational Grade 1 certified. Locksets are to be manufactured with a corrosion resistant steel case and be field-reversible for handing without disassembly of the lock body.


a. Schlage (SC) – L9000 Series.

jessicalmartinez

Permit Number Batch



b. Best (BE) – 45H Series. c. Corbin Russwin (RU) – ML2000 Series. d. Sargent (SA) – 8200 Series.

B. Multi-Point Locksets: Vertical rod locking devices designed for openings requiring multiple latching points within one locking mechanism. Rods are retracted by dual mounted outside lever trim controls available in a variety of ANSI/BHMA operational functions. Option for single top latching only eliminates the need for bottom strikes.


a. Corbin Russwin Hardware (RU) – MP9800 Series. b. Sargent Manufacturing (SA) - 7000 Series. c. Securitech (SEC) – Auto-Bolt Max Series.

2.7 ELECTROMECHANICAL LOCKING DEVICES

A. Electromechanical Multi-Point Locks: Vertical rod locking devices designed for openings requiring multiple latching points within one locking mechanism. Rods are retracted by dual mounted outside lever trim controls available in a variety of ANSI/BHMA operational functions. Option for single top latching only eliminates the need for bottom strikes. Electromechanical options include solenoid activated trim, electric latch retraction, and inside and outside lever monitoring.


a. Corbin Russwin Hardware (RU) MP98500 Series. b. Sargent Manufacturing (SA) - 7073/7074 Series. c. Securitech (SEC) – Auto-Bolt Max Series.

2.8 LOCK AND LATCH STRIKES

A. Strikes: Provide manufacturer's standard strike with strike box for each latch or lock bolt, with curved lip extended to protect frame, finished to match door hardware set, unless otherwise indicated, and as follows:

1. Flat-Lip Strikes: For locks with three-piece antifriction latchbolts, as recommended by manufacturer.

2. Extra-Long-Lip Strikes: For locks used on frames with applied wood casing trim. 3. Aluminum-Frame Strike Box: Provide manufacturer's special strike box fabricated

for aluminum framing. 4. Double-lipped strikes: For locks at double acting doors. Furnish with retractable

stop for rescue hardware applications.

B. Standards: Comply with the following:

1. Strikes for Mortise Locks and Latches: BHMA A156.13. 2. Strikes for Bored Locks and Latches: BHMA A156.2.

jessicalmartinez

Permit Number Batch



3. Strikes for Auxiliary Deadlocks: BHMA A156.36. 4. Dustproof Strikes: BHMA A156.16.

2.9 CONVENTIONAL EXIT DEVICES

A. General Requirements: All exit devices specified herein shall meet or exceed the following criteria:

1. At doors not requiring a fire rating, provide devices complying with NFPA 101 and listed and labeled for "Panic Hardware" according to UL305. Provide proper fasteners as required by manufacturer including sex nuts and bolts at openings specified in the Hardware Sets.

2. Where exit devices are required on fire rated doors, provide devices complying with NFPA 80 and with UL labeling indicating "Fire Exit Hardware". Provide devices with the proper fasteners for installation as tested and listed by UL. Consult manufacturer’s catalog and template book for specific requirements.

3. Except on fire rated doors, provide exit devices with hex key dogging device to hold the pushbar and latch in a retracted position. Provide optional keyed cylinder dogging on devices where specified in Hardware Sets.

4. Devices must fit flat against the door face with no gap that permits unauthorized dogging of the push bar. The addition of filler strips is required in any case where the door light extends behind the device as in a full glass configuration.

5. Electromechanical Options: Subject to same compliance standards and requirements as mechanical exit devices, electrified devices to be of type and design as specified in hardware sets. Include any specific controllers when conventional power supplies are not sufficient to provide the proper inrush current.

6. Motorized Electric Latch Retraction: Devices with an electric latch retraction feature must use motors which have a maximum current draw of 600mA. Solenoid driven latch retraction is not acceptable.

7. Lever Operating Trim: Where exit devices require lever trim, furnish manufacturer's heavy duty escutcheon trim with threaded studs for thru-bolts.

a. Lock Trim Design: As indicated in Hardware Sets, provide finishes and designs to match that of the specified locksets.

b. Where function of exit device requires a cylinder, provide a cylinder (Rim or Mortise) as specified in Hardware Sets.

8. Vertical Rod Exit Devices: Where surface or concealed vertical rod exit devices are used at interior openings, provide as less bottom rod (LBR) unless otherwise indicated. Provide dust proof strikes where thermal pins are required to project into the floor.

jessicalmartinez

Permit Number Batch



9. Narrow Stile Applications: At doors constructed with narrow stiles, or as specified in Hardware Sets, provide devices designed for maximum 2” wide stiles.

10. Dummy Push Bar: Nonfunctioning push bar matching functional push bar.

11. Rail Sizing: Provide exit device rails factory sized for proper door width application.

12. Through Bolt Installation: For exit devices and trim as indicated in Door Hardware Sets.

B. Conventional Push Rail Exit Devices (Heavy Duty): ANSI/BHMA A156.3, Grade 1 certified panic and fire exit hardware devices furnished in the functions specified in the Hardware Sets. Exit device latch to be stainless steel, pullman type, with deadlock feature.


a. Corbin Russwin Hardware (RU) - ED4000 / ED5000 Series. b. Sargent Manufacturing (SA) - 80 Series. c. Von Duprin (VD) - 35A/98 Series. d. Precision (PR) – Apex 2000 Series.

2.10 DOOR CLOSERS

A. All door closers specified herein shall meet or exceed the following criteria:

1. General: Door closers to be from one manufacturer, matching in design and style, with the same type door preparations and templates regardless of application or spring size. Closers to be non-handed with full sized covers including installation and adjusting information on inside of cover.

2. Standards: Closers to comply with UL-10C for Positive Pressure Fire Test and be U.L. listed for use of fire rated doors.

3. Cycle Testing: Provide closers which have surpassed 15 million cycles in a test witnessed and verified by UL.

4. Size of Units: Comply with manufacturer's written recommendations for sizing of door closers depending on size of door, exposure to weather, and anticipated frequency of use. Where closers are indicated for doors required to be accessible to the physically handicapped, provide units complying with ANSI ICC/A117.1.

5. Closer Arms: Provide heavy duty, forged steel closer arms unless otherwise indicated in Hardware Sets.

6. Closers shall not be installed on exterior or corridor side of doors; where possible

install closers on door for optimum aesthetics.

jessicalmartinez

Permit Number Batch



7. Closer Accessories: Provide door closer accessories including custom templates, special mounting brackets, spacers and drop plates as required for proper installation. Provide through-bolt and security type fasteners as specified in the hardware sets.

B. Door Closers, Surface Mounted (Heavy Duty): ANSI/BHMA A156.4, Grade 1 surface mounted, heavy duty door closers with complete spring power adjustment, sizes 1 thru 6; and fully operational adjustable according to door size, frequency of use, and opening force. Closers to be rack and pinion type, one piece cast iron or aluminum alloy body construction, with adjustable backcheck and separate non-critical valves for closing sweep and latch speed control. Provide non-handed units standard.


a. LCN Closers (LC) - 4040 Series. b. Sargent Manufacturing (SA) - 351 Series. c. Norton Door Controls (NO) - 7500 Series. d. Stanley Commerical – QDC1 Series.

2.11 AUTOMATIC DOOR OPERATORS

A. ELECTROMECHANICAL DOOR OPERATORS 1. General: Provide low energy operators of size recommended by manufacturer for

door size, weight, and movement; for condition of exposure; and for compliance with UL 325. Coordinate operator mechanisms with door operation, hinges, and activation devices.

a. Fire-Rated Doors: Provide door operators for fire-rated door assemblies that comply with NFPA 80 for fire-rated door components and are listed and labeled by a qualified testing agency.

2. Standard: Certified ANSI/BHMA A156.19. 3. Performance Requirements:

a. Opening Force if Power Fails: Not more than 15 lbf required to release a latch if provided, not more than 30 lbf required to manually set door in motion, and not more than 15 lbf required to fully open door.

b. Entrapment Protection: Not more than 15 lbf required to prevent stopped door from closing or opening.

4. Configuration: Surface mounted or in-ground as required. Door operators to control single swinging and pair of swinging doors.

5. Operation: Power opening and spring closing operation capable of meeting ANSI A117.1 accessibility guideline. Provide time delay for door to remain open before initiating closing cycle as required by ANSI/BHMA A156.19.

6. Features: Operator units to have full feature adjustments for door opening and closing force and speed, backcheck, motor assist acceleration from 0 to 30 seconds, time delay, vestibule interface delay, obstruction recycle, and hold open time from 0 up to 30 seconds.

7. Provide outputs and relays on board the operator to allow for coordination of exit device latch retraction, electric strikes, magnetic locks, card readers, safety and motion sensors and specified auxiliary contacts.

jessicalmartinez

Permit Number Batch



8. Brackets and Reinforcements: Manufacturer's standard, fabricated from aluminum with nonferrous shims for aligning system components.

9. Acceptable Manufacturers: Subject to compliance with requirements, provide products by one of the following:

a. Besam Automated Entrance Systems (BE) – SW200i Series. b. Dorma Products (DO) – ED400 Series. c. LCN Closers (LC) - 9500 Series.

B. ACTIVATION DEVICES 1. General: Provide activation devices in accordance with ANSI/BHMA A156.19

standard, for condition of exposure indicated and for long term, maintenance free operation under normal traffic load operation. Coordinate activation control with electrified hardware and access control interfaces. Activation switches are standard SPST, with optional DPDT availability.

2. Push-Plate Switch: Momentary contact door control switch with push-plate actuator.

a. Configuration: Square or round push-plate control switch with single or double gang junction box mounting. Provide narrow profile face plate where indicated for jamb or mullion mounting. Mounting Location: As indicated on Drawings.

b. Push-Plate Material: Stainless steel. c. Message: International symbol of accessibility with "Push (Press) to

Open (Operate)" text. d. Acceptable Manufacturers: 1) BEA Sensors (BS) – PBS45 Series. 2) Norton Door Controls (NO) – 500 Series. 3) Wikk Industries (WI) – 4x4 Series. 4) LCN (LC) – 853 Series

3. Touch Less Wall Switch: Momentary contact door control switch with movement required activation. Single or double gang box junction box mounting.

a. Doppler radar sensor. b. Mounting Location: As indicated on Drawings. c. Acceptable Manufacturers: 1) BEA Sensors (BS) – MS Series. 2) LCN Closers (LC) – 813 Series. 3) Securitron (SU) – WSS Series.

4. Key Switch: Key controlled actuator device enclosed in single or double gang junction box.

a. Faceplate Material: Stainless steel. b. Functions: On-off, maintained contact. c. Two-way Mounting: Recess or surface mounting as indicated on

Drawings. d. Acceptable Manufacturers: 1) Securitron (SU) – MKA Series. 2) Wikk Industries (WI) – KS Series.

jessicalmartinez

Permit Number Batch



2.12 SURFACE MOUNTED CLOSER HOLDERS

A. Electromagnetic Door Holders: Certified ANSI A156.15 electromagnetic door holder/releases with a minimum 20 to 40 pounds holding power and single coil construction able to accommodate.12VDC, 24VAC, 24VDC and 120VAC. Coils to be independently wound, employing an integral fuse and armatures to include a positive release button.


a. LCN Door Closers (LC) - SEM7800 Series. b. Rixson (RF) - 980/990 Series. c. Sargent Manufacturing (SA) - 1560 Series. d. Dorma (DO) – EM Series.

2.13 ARCHITECTURAL TRIM

A. Door Protective Trim

1. General: Door protective trim units to be of type and design as specified below or in the Hardware Sets.

2. Size: Fabricate protection plates (kick, armor, or mop) not more than 2" less than door width (LDW) on stop side of single doors and 1” LDW on stop side of pairs of doors, and not more than 1" less than door width on pull side. Coordinate and provide proper width and height as required where conflicting hardware dictates. Height to be as specified in the Hardware Sets.

3. Where plates are applied to fire rated doors with the top of the plate more than 16” above the bottom of the door, provide plates complying with NFPA 80. Consult manufacturer’s catalog and template book for specific requirements for size and applications.

4. Protection Plates: ANSI/BHMA A156.6 certified protection plates (kick, armor, or mop), fabricated from the following:

a. Stainless Steel: 300 grade, 050-inch thick.

5. Options and fasteners: Provide manufacturer's designated fastener type as specified in the Hardware Sets. Provide countersunk screw holes.



jessicalmartinez

Permit Number Batch



2.14 DOOR STOPS AND HOLDERS

A. General: Door stops and holders to be of type and design as specified below or in the Hardware Sets.

B. Door Stops and Bumpers: ANSI/BHMA A156.16, Grade 1 certified door stops and wall bumpers. Provide wall bumpers, either convex or concave types with anchorage as indicated, unless floor or other types of door stops are specified in Hardware Sets. Do not mount floor stops where they will impede traffic. Where floor or wall bumpers are not appropriate, provide overhead type stops and holders.



C. Overhead Door Stops and Holders: ANSI/BHMA A156.6, Grade 1 certified overhead stops and holders to be surface or concealed types as indicated in Hardware Sets. Track, slide, arm and jamb bracket to be constructed of extruded bronze and shock absorber spring of heavy tempered steel. Provide non-handed design with mounting brackets as required for proper operation and function.


a. Glynn Johnson (GJ). b. Rixson Door Controls (RF). c. Sargent Manufacturing (SA). d. Architectural Builders Hardware (ABH).

2.15 ARCHITECTURAL SEALS

A. General: Thresholds, weatherstripping, and gasket seals to be of type and design as specified below or in the Hardware Sets. Provide continuous weatherstrip gasketing on exterior doors and provide smoke, light, or sound gasketing on interior doors where indicated. At exterior applications provide non-corrosive fasteners and elsewhere where indicated.

B. Smoke Labeled Gasketing: Assemblies complying with NFPA 105 that are listed and labeled by a testing and inspecting agency acceptable to authorities having jurisdiction, for smoke control ratings indicated, based on testing according to UL 1784.

1. Provide smoke labeled perimeter gasketing at all smoke labeled openings.

C. Fire Labeled Gasketing: Assemblies complying with NFPA 80 that are listed and labeled by a testing and inspecting agency acceptable to authorities having jurisdiction, for fire ratings indicated, based on testing according to UL-10C.

jessicalmartinez

Permit Number Batch



1. Provide intumescent seals as indicated to meet UL10C Standard for Positive Pressure Fire Tests of Door Assemblies, and NPFA 252, Standard Methods of Fire Tests of Door Assemblies.

D. Sound-Rated Gasketing: Assemblies that are listed and labeled by a testing and inspecting agency, for sound ratings indicated.

E. Replaceable Seal Strips: Provide only those units where resilient or flexible seal strips are easily replaceable and readily available from stocks maintained by manufacturer.

A. Acceptable Manufacturers:

1. National Guard Products (NG). 2. Pemko Manufacturing (PE). 3. Reese Enterprises, Inc. (RE).

2.16 ELECTRONIC ACCESSORIES

A. Key Switches: Key switches furnished standard with stainless steel single gang face plate with a 12/24VDC bi-color LED indicator. Integral backing bracket permits integration with any 1 1/4" or 1 1/2" mortise type cylinder. Key switches available as momentary or maintained action and in narrow face plate options.


a. Security Door Controls (SD) - 800 Series. b. Securitron (SU) - MK Series. c. Rutherford Controls (RC).

B. Push-Button Switches: Industrial grade momentary or alternate contact, back-lighted push buttons with stainless-steel switch enclosures. 12/24 VDC bi-color illumination suitable for either flush or surface mounting.


a. Security Door Controls (SD) - 400 Series. b. Securitron (SU) - PB Series. c. Rutherford Controls (RC).

C. Touchless Switches: FCC certified microwave sensing switch used for REX or activation of various access control devices in place of a traditional wired switch. Unit to have an adjustable sensing zone from 4” to 24”. At exterior locations furnish foam gaskets and weather covers. Provide single gang or double gang unit as specified in the hardware sets

D. Request-to-Exit Motion Sensor: Request-to-Exit Sensors motion detectors specifically designed for detecting exiting through a door from the secure area to a non-secure area. Include built-in timers (up to 60 second adjustable timing), door monitor with sounder

jessicalmartinez

Permit Number Batch



alert, internal vertical pointability coverage, 12VDC or 24VDC power and selectable relay trigger with fail safe/fail secure modes.


a. Securitron (SU) - XMS Series. b. Rutherford controls (RC).

E. Door Position Switches: Door position magnetic reed contact switches specifically designed for use in commercial door applications. On recessed models the contact and magnetic housing snap-lock into a 1" diameter hole. Surface mounted models include wide gap distance design complete with armored flex cabling. Provide SPDT, N/O switches with optional Rare Earth Magnet installation on steel doors with flush top channels.


a. Security Door Controls (SD) - DPS Series. b. Securitron (SU) - DPS Series. c. Dorma (DO). d. Rutherford Controls (RC).

F. Power Supplies: Provide Nationally Recognized Testing Laboratory Listed 12VDC or 24VDC (field selectable) filtered and regulated power supplies. Include battery backup option with integral battery charging capability in addition to operating the DC load in event of line voltage failure. Provide the least number of units, at the appropriate amperage level, sufficient to exceed the required total draw for the specified electrified hardware and access control equipment.


a. Corbin Russwin Hardware (RU) – 782. b. Sargent Manufacturing (SA) – 3500 Series. c. Securitron (SU) - BPS Series. d. Von Duprin (VD) - PS. e. Rutherford Controls (RC).

2.17 FABRICATION

A. Fasteners: Provide door hardware manufactured to comply with published templates generally prepared for machine, wood, and sheet metal screws. Provide screws according to manufacturers recognized installation standards for application intended.

2.18 FINISHES

A. Standard: Designations used in the Hardware Sets and elsewhere indicate hardware finishes complying with ANSI/BHMA A156.18, including coordination with traditional U.S. finishes indicated by certain manufacturers for their products.

jessicalmartinez

Permit Number Batch



B. Provide quality of finish, including thickness of plating or coating (if any), composition, hardness, and other qualities complying with manufacturer's standards, but in no case less than specified by referenced standards for the applicable units of hardware

C. Protect mechanical finishes on exposed surfaces from damage by applying a strippable, temporary protective covering before shipping.

PART 3 - EXECUTION

3.1 EXAMINATION

A. Examine scheduled openings, with Installer present, for compliance with requirements for installation tolerances, labeled fire door assembly construction, wall and floor construction, and other conditions affecting performance.

B. Notify architect of any discrepancies or conflicts between the door schedule, door types, drawings and scheduled hardware. Proceed only after such discrepancies or conflicts have been resolved in writing.

3.2 PREPARATION

A. Hollow Metal Doors and Frames: Comply with ANSI/DHI A115 series.

B. Wood Doors: Comply with ANSI/DHI A115-W series.

3.3 INSTALLATION

A. Install each item of mechanical and electromechanical hardware and access control equipment to comply with manufacturer's written instructions and according to specifications.

1. Installers are to be trained and certified by the manufacturer on the proper installation and adjustment of fire, life safety, and security products including: hanging devices; locking devices; closing devices; and seals.

B. Mounting Heights: Mount door hardware units at heights indicated in following applicable publications, unless specifically indicated or required to comply with governing regulations:

1. Standard Steel Doors and Frames: DHI's "Recommended Locations for Architectural Hardware for Standard Steel Doors and Frames."

2. Wood Doors: DHI WDHS.3, "Recommended Locations for Architectural Hardware for Wood Flush Doors."

3. Where indicated to comply with accessibility requirements, comply with ANSI A117.1 "Accessibility Guidelines for Buildings and Facilities."

jessicalmartinez

Permit Number Batch



4. Provide blocking in drywall partitions where wall stops or other wall mounted hardware is located.

C. Power Operator products and accessories are required to be installed through current members of the manufacturer's "Power Operator Preferred Installer" program.

D. Retrofitting: Install door hardware to comply with manufacturer's published templates and written instructions. Where cutting and fitting are required to install door hardware onto or into surfaces that are later to be painted or finished in another way, coordinate removal, storage, and reinstallation of surface protective trim units with finishing work specified in Division 9 Sections. Do not install surface-mounted items until finishes have been completed on substrates involved.

E. Thresholds: Set thresholds for exterior and acoustical doors in full bed of sealant complying with requirements specified in Division 7 Section "Joint Sealants."

F. Storage: Provide a secure lock up for hardware delivered to the project but not yet installed. Control the handling and installation of hardware items so that the completion of the work will not be delayed by hardware losses before and after installation.

3.4 FIELD QUALITY CONTROL

A. Field Inspection: Supplier will perform a final inspection of installed door hardware and state in report whether work complies with or deviates from requirements, including whether door hardware is properly installed, operating and adjusted.

3.5 ADJUSTING

A. Initial Adjustment: Adjust and check each operating item of door hardware and each door to ensure proper operation or function of every unit. Replace units that cannot be adjusted to operate as intended. Adjust door control devices to compensate for final operation of heating and ventilating equipment and to comply with referenced accessibility requirements.

3.6 CLEANING AND PROTECTION

A. Protect all hardware stored on construction site in a covered and dry place. Protect exposed hardware installed on doors during the construction phase. Install any and all hardware at the latest possible time frame.

B. Clean adjacent surfaces soiled by door hardware installation.

C. Clean operating items as necessary to restore proper finish. Provide final protection and maintain conditions that ensure door hardware is without damage or deterioration at time of owner occupancy.

jessicalmartinez

Permit Number Batch



3.7 DEMONSTRATION

A. Instruct Owner's maintenance personnel to adjust, operate, and maintain mechanical and electromechanical door hardware.

3.8 DOOR HARDWARE SETS

A. The hardware sets represent the design intent and direction of the owner and architect. They are a guideline only and should not be considered a detailed hardware schedule. Discrepancies, conflicting hardware and missing items should be brought to the attention of the architect with corrections made prior to the bidding process. Omitted items not included in a hardware set should be scheduled with the appropriate additional hardware required for proper application and functionality.

B. Manufacturer’s Abbreviations:

1. BM - Besam 2. DE - Detex Corporation 3. FA - Falcon 4. GJ - Glynn-Johnson 5. HS - HES 6. IV - Ives 7. LC - LCN Closers 8. MK - McKinney 9. MR - Markar 10. NG - National Guard 11. NO - Norton 12. OT - OTHER 13. PE - Pemko 14. RF - Rixson 15. RO - Rockwood 16. RU - Corbin Russwin 17. SA - Sargent 18. SC - Schlage 19. SH - Schlage Electronic Security 20. SU - Securitron 21. TC - Trimco 22. VD - Von Duprin

Hardware Schedule Set: 1.0 3 Hinge (heavy weight) T4A3786 NRP US26D MK 1 EM Exit Device RX 9875L-F E996L-16 FS CON US32D VD (MORTISE-UL-SAF-REX) 1 Cylinder (RIM) 20-057 ICX 626 SC 3 Permanent Core 23-030 626 SC

https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=135559637,

https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=17257594,14654360,



jessicalmartinez

Permit Number Batch



1 Door Closer (Pull Side) 7500 689 NO 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Wall Stop 409 US32D RO 1 Threshold 276A MSES25 PE (VERIFY FLOOR CONDITION) 1 Gasketing S88D PE 1 Sweep 315CN PE 1 Electric Power Transfer EL-EPT SU 1 Wire Harness (THRU RAIL) CON-6 VD 1 Wire Harness (POWER SUPPLY) CON-192 VD 1 Wire Harness CON-6W VD (POWER SUPPLY EXTENSION) 1 Position Switch DPS-W/M-CAS SU 1 Card Reader SUPPLIED BY DIVISION 28 OT 1 Power Supply SUPPLIED BY DIVISION 28 OT Set: 2.0 3 Hinge (heavy weight) T4A3786 NRP US26D MK 1 EM Exit Device RX 9875L-F E996L-16 FS CON US32D VD (MORTISE-UL-SAF-REX) 1 Permanent Core 23-030 626 SC 1 Cylinder (MORTISE) 20-061 ICX 626 SC 1 Surface Overhead Stop 10-X36 630 RF 1 Door Closer (Pull Side) 7500 689 NO 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Threshold 276A MSES25 PE (VERIFY FLOOR CONDITION) 1 Gasketing S88D PE 1 Sweep 315CN PE 1 Electric Power Transfer EL-EPT SU 1 Wire Harness (THRU RAIL) CON-6 VD 1 Wire Harness (POWER SUPPLY) CON-192 VD 1 Wire Harness CON-6W VD (POWER SUPPLY EXTENSION) 1 Position Switch DPS-W/M-CAS SU 1 Card Reader SUPPLIED BY DIVISION 28 OT 1 Power Supply SUPPLIED BY DIVISION 28 OT Set: 3.0 3 Hinge (heavy weight) T4A3786 NRP US26D MK 1 EM Exit Device RX 9875L-F E996L-16 FS CON US32D VD (MORTISE-UL-SAF-REX) 1 Permanent Core 23-030 626 SC 1 Cylinder (MORTISE) 20-061 ICX 626 SC 1 Concealed Overhead Stop 1-X36 630 RF 1 Door Closer (Push Side) PR7500 689 NO







https://www.openingsstudio.com/AAOS/AAOS/CutSheetViewer.jsp?IDS=153196759,16609190,153196841,




























jessicalmartinez

Permit Number Batch



1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Threshold 276A MSES25 PE (VERIFY FLOOR CONDITION) 1 Gasketing S88D PE 1 Sweep 315CN PE 1 Electric Power Transfer EL-EPT SU 1 Wire Harness (THRU RAIL) CON-6 VD 1 Wire Harness (POWER SUPPLY) CON-192 VD 1 Wire Harness CON-6W VD (POWER SUPPLY EXTENSION) 1 Position Switch DPS-W/M-CAS SU 1 Card Reader SUPPLIED BY DIVISION 28 OT 1 Power Supply SUPPLIED BY DIVISION 28 OT Set: 3.1 3 Hinge (heavy weight) T4A3786 NRP US26D MK 1 Fire Rated Mortise Exit 9875L-F 996L US32D VD 1 Permanent Core 23-030 626 SC 1 Cylinder (MORTISE) 20-061 ICX 626 SC 1 Concealed Overhead Stop 1-X36 630 RF 1 Door Closer (Push Side) PR7500 689 NO 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Threshold 276A MSES25 PE (VERIFY FLOOR CONDITION) 1 Gasketing S88D PE 1 Sweep 315CN PE 1 Position Switch DPS-W/M-CAS SU 1 Power Supply SUPPLIED BY DIVISION 28 OT Set: 4.0 3 Hinge (heavy weight) T4A3786 NRP US26D MK 1 EM Exit Device RX 9875L-F E996L-16 FS CON US32D VD (MORTISE-UL-SAF-REX) 1 Permanent Core 23-030 626 SC 1 Cylinder (MORTISE) 20-061 ICX 626 SC 1 Door Closer (Push Side) PR7500 689 NO 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Wall Stop 409 US32D RO 1 Threshold 276A MSES25 PE (VERIFY FLOOR CONDITION) 1 Gasketing S88D PE 1 Sweep 315CN PE 1 Electric Power Transfer EL-EPT SU 1 Wire Harness (THRU RAIL) CON-6 VD 1 Wire Harness (POWER SUPPLY) CON-192 VD 1 Wire Harness CON-6W VD (POWER SUPPLY EXTENSION)





































jessicalmartinez

Permit Number Batch



1 Position Switch DPS-W/M-CAS SU 1 Card Reader SUPPLIED BY DIVISION 28 OT 1 Power Supply SUPPLIED BY DIVISION 28 OT Set: 5.0 3 Hinge TA2714 NRP US26D MK 1 EM Mortise Lock (FSE-REX) L909EUT OME/A RX 630 SC 1 Fire Rated Mortise Exit 9875L-F 996L US32D VD 1 Permanent Core 23-030 626 SC 1 Cylinder (MORTISE) 20-061 ICX 626 SC 1 Door Closer CLP7500 689 NO (Push Side w/Stop Arm) 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Threshold 276A MSES25 PE (VERIFY FLOOR CONDITION) 1 Gasketing S88D PE 1 Sweep 315CN PE Set: 6.0 3 Hinge TA2714 NRP US26D MK 1 EM Mortise Lock (FSE-REX) L9092EUT OME/A RX 630 SC 1 Permanent Core 23-030 626 SC 1 Surface Overhead Stop 10-X36 630 RF 1 Door Closer (Pull Side) 7500 689 NO 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Threshold 276A MSES25 PE (VERIFY FLOOR CONDITION) 1 Gasketing S88D PE 1 Sweep 315CN PE 1 Electric Power Transfer EL-EPT SU 1 Wire Harness (THRU DOOR) CON-LENGTH AS REQUIRED VD 1 Wire Harness (POWER SUPPLY) CON-192 VD 1 Wire Harness CON-6W VD (POWER SUPPLY EXTENSION) 1 Position Switch DPS-W/M-CAS SU 1 Card Reader SUPPLIED BY DIVISION 28 OT 1 Power Supply SUPPLIED BY DIVISION 28 OT Set: 7.0 3 Hinge (heavy weight) T4A3786 NRP US26D MK 1 Fire Rated Mortise Exit 9875L-F 996L US32D VD 1 Permanent Core 23-030 626 SC 1 Cylinder (MORTISE) 20-061 ICX 626 SC 1 Door Closer (Push Side) PR7500 689 NO 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Wall Stop 409 US32D RO


































jessicalmartinez

Permit Number Batch



1 Threshold 276A MSES25 PE (VERIFY FLOOR CONDITION) 1 Gasketing S88D PE 1 Sweep 315CN PE Set: 8.0 3 Hinge (heavy weight) T4A3386 NRP US32D MK 1 EM Mortise Lock (FS-REX) L9092ELT OME/A RX 630 SC 1 Permanent Core 23-030 626 SC 1 Concealed Overhead Stop 1-X36 630 RF 1 Door Closer (Push Side) PR7500 689 NO 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Gasketing S88D PE 1 Rain Guard 346C PE 1 Door Bottom 216BDCFG PE 1 Electric Power Transfer EL-EPT SU 1 Wire Harness (THRU DOOR) CON-LENGTH AS REQUIRED VD 1 Wire Harness (POWER SUPPLY) CON-192 VD 1 Wire Harness (POWER SUPPLY EXTENSION) CON-6W VD 1 Position Switch DPS-W/M-CAS SU 1 Power Supply SUPPLIED BY DIVISION 28 OT Set: 9.0 1 Continuous Hinge FM300 CTP 630 MR 1 EM Exit Device (VONDUPRIN) RX 98NL-F 990NL US32D VD 1 Cylinder (RIM) 20-057 ICX 626 SC 1 Permanent Core 23-030 626 SC 1 Concealed Overhead Stop 1-X36 630 RF 1 Door Closer (Push Side) PR7500 689 NO 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Threshold 2748A MSES25SS PE (VERIFY FLOOR CONDITION) 1 Rain Guard 346C PE 1 Gasketing 2891AS (@ HEAD & JAMBS) PE 1 Door Bottom 216BDCFG PE 1 Electric Power Transfer EL-EPT SU 1 Wire Harness (THRU RAIL) CON-6 VD 1 Wire Harness (POWER SUPPLY) CON-192 VD 1 Wire Harness (POWER SUPPLY EXTENSION) CON-6W VD 1 Position Switch DPS-W/M-CAS SU 1 Power Supply SUPPLIED BY DIVISION 28 OT Set: 10.0 3 Hinge TA2714 US26D MK 1 EM Mortise Lock (FSE-REX) L9092EUT OME/A RX 630 SC 1 Permanent Core 23-030 626 SC







































jessicalmartinez

Permit Number Batch



1 Door Closer (Pull Side) 7500 689 NO 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Wall Stop 409 US32D RO 1 Gasketing S773D PE 1 Door Bottom 411APKL/420APKL PE 1 Electric Power Transfer EL-EPT SU 1 Wire Harness (THRU DOOR) CON-LENGTH AS REQUIRED VD 1 Wire Harness (POWER SUPPLY) CON-192 VD 1 Wire Harness (POWER SUPPLY EXTENSION) CON-6W VD 1 Position Switch DPS-W/M-CAS SU 1 Card Reader SUPPLIED BY DIVISION 28 OT 1 Power Supply SUPPLIED BY DIVISION 28 OT Set: 11.0 3 Hinge TA2714 NRP US26D MK 1 Mortise Lock (STOREROOM) L9080T OME/A 630 SC 1 Permanent Core 23-030 626 SC 1 Door Closer (Push Side) PR7500 689 NO 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Wall Stop 409 US32D RO 1 Gasketing S773D PE Set: 12.0 3 Hinge (heavy weight) T4A3786 US26D MK 1 Mortise Lock L9025 OME/A 630 SC 1 Door Closer (Pull Side) 7500 689 NO 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Wall Stop 409 US32D RO 1 Gasketing S773D PE Set: 13.0 3 Hinge (heavy weight) T4A3786 NRP US26D MK 1 EM Mortise Lock (FSE-REX) L9092EUT OME/A RX 630 SC 1 Permanent Core 23-030 626 SC 1 Door Closer (Push Side w/Stop Arm) CLP7500 689 NO 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Gasketing S88D PE 1 Electric Power Transfer EL-EPT SU 1 Wire Harness (THRU DOOR) CON-LENGTH AS REQUIRED VD 1 Wire Harness (POWER SUPPLY) CON-192 VD 1 Wire Harness (POWER SUPPLY EXTENSION) CON-6W VD 1 Position Switch DPS-W/M-CAS SU 1 Card Reader SUPPLIED BY DIVISION 28 OT 1 Power Supply SUPPLIED BY DIVISION 28 OT





































jessicalmartinez

Permit Number Batch



Set: 14.0 6 Hinge (heavy weight) T4A3786 NRP US26D MK 1 Fire Rated Mortise Exit 9875NL-F 996L-NL-16 US32D VD 1 Permanent Core 23-030 626 SC 1 Cylinder (MORTISE) 20-061 ICX 626 SC 1 Door Closer (Push Side w/Stop Arm) CLP7500 689 NO 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Gasketing S773D PE Set: 15.0 3 Hinge TA2714 US26D MK 1 Mortise Lock (STOREROOM) L9080T OME/A 630 SC 1 Permanent Core 23-030 626 SC 1 Door Closer (Pull Side) 7500 689 NO 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Wall Stop 409 US32D RO 1 Gasketing S773D PE Set: 15.1 3 Hinge TA2714 US26D MK 1 Mortise Lock (PASSAGE) L9010 OME/A 630 SC 1 Door Closer (Pull Side) 7500 689 NO 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Wall Stop 409 US32D RO 1 Gasketing S773D PE Set: 16.0 3 Hinge TA2714 NRP US26D MK 1 Fire Rated Mortise Exit 9875NL-F 996L-NL-16 US32D VD 1 Permanent Core 23-030 626 SC 1 Cylinder (MORTISE) 20-061 ICX 626 SC 1 Door Closer (Push Side) PR7500 689 NO 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Wall Stop 409 US32D RO 1 Gasketing S773D PE Set: 16.1 3 Hinge TA2714 NRP US26D MK 1 Exit Device (PASSAGE) LD 9875L-BE 996L-BE-16 US32D VD 1 Door Closer (Push Side) PR7500 689 NO 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Wall Stop 409 US32D RO 1 Gasketing S773D PE



































jessicalmartinez

Permit Number Batch



Set: 17.0 3 Hinge TA2714 NRP US26D MK 1 Fire Rated Mortise Exit 9875NL-F 996L-NL-16 US32D VD 1 Permanent Core 23-030 626 SC 1 Cylinder (MORTISE) 20-061 ICX 626 SC 1 Door Closer (Push Side w/Stop Arm) CLP7500 689 NO 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Gasketing S773D PE 1 Door Bottom 411APKL/420APKL PE Set: 18.0 3 Hinge TA2714 US26D MK 1 Exit Device (PASSAGE) LD 9875L-BE 996L-BE-16 US32D VD 1 Door Closer (Pull Side) 7500 689 NO 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Wall Stop 409 US32D RO 1 Gasketing S773D PE Set: 19.0 3 Hinge (heavy weight) T4A3786 NRP US26D MK 1 EM Exit Device RX 9875L-F E996L-16 FS CON US32D VD (MORTISE-UL-SAF-REX) 1 Permanent Core 23-030 626 SC 1 Cylinder (MORTISE) 20-061 ICX 626 SC 1 Door Closer (Push Side) PR7500 689 NO 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Wall Stop 409 US32D RO 1 Gasketing S88D PE 1 Electric Power Transfer EL-EPT SU 1 Wire Harness (THRU RAIL) CON-6 VD 1 Wire Harness (POWER SUPPLY) CON-192 VD 1 Wire Harness (POWER SUPPLY EXTENSION) CON-6W VD 1 Position Switch DPS-W/M-CAS SU 1 Card Reader SUPPLIED BY DIVISION 28 OT 1 Power Supply SUPPLIED BY DIVISION 28 OT Set: 20.0 1 Permanent Core 23-030 626 SC 1 Cylinder (MORTISE) 20-061 ICX 626 SC 1 Balance of Hardware SUPPLIED BY DOOR MFG/SUPPLIER OT Notes: COORINDATE CYLINDER CONFIGURATION AND QUANTITY WITH LOCK MANUFACTURER.































jessicalmartinez

Permit Number Batch



Set: 20.1 1 Permanent Core 23-030 626 SC 1 Cylinder (MORTISE) 20-061 ICX 626 SC 1 Card Reader SUPPLIED BY DIVISION 28 OT 1 Balance of Hardware SUPPLIED BY DOOR MFG/SUPPLIER OT Notes: COORINDATE CYLINDER CONFIGURATION AND QUANTITY WITH LOCK MANUFACTURER. Set: 21.0 3 Hinge (heavy weight) T4A3786 US26D MK 1 Mortise Lock (STOREROOM) L9080T OME/A 630 SC 1 Permanent Core 23-030 626 SC 1 Surface Overhead Stop 10-X36 630 RF 1 Door Closer (Pull Side) 7500 689 NO 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Gasketing S773D PE Set: 22.0 3 Hinge (heavy weight) T4A3786 NRP US26D MK 1 Fire Rated Mortise Exit 9875NL-F 996L-NL-16 US32D VD 1 Permanent Core 23-030 626 SC 1 Cylinder (MORTISE) 20-061 ICX 626 SC 1 Door Closer (Push Side w/Stop Arm) CLP7500 689 NO 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Gasketing S773D PE Set: 23.0 6 Hinge TA2714 NRP US26D MK 2 Flush Bolt 555 US26D RO 1 Dust Proof Strike 570 US26D RO 1 Mortise Lock L9080T LLL x OME/A 630 SC (STOREROOM LESS IS TRIM) 1 Permanent Core 23-030 626 SC 2 Concealed Overhead Stop 1-X36 630 RF 2 Silencer 608 RO Set: 24.0 6 Hinge TA2714 NRP US26D MK 1 Dust Proof Strike 570 US26D RO 1 Flush Bolt 2845/2945 US26D RO 1 Mortise Lock (STOREROOM) L9080T OME/A 630 SC 1 Permanent Core 23-030 626 SC 1 Coordinator 2600 SERIES x WEAR PLATES US28 RO






























jessicalmartinez

Permit Number Batch



2 Concealed Overhead Stop 1-X36 630 RF 2 Door Closer (Push Side) PR7500 689 NO 2 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Gasketing S773D PE 1 Astragal 357SS x S88D PE Set: 25.0 6 Hinge TA2714 NRP US26D MK 1 Dust Proof Strike 570 US26D RO 1 Flush Bolt 2845/2945 US26D RO 1 EM Mortise Lock (FSE-REX) L9092EUT OME/A RX 630 SC 1 Permanent Core 23-030 626 SC 1 Coordinator 2600 SERIES x WEAR PLATES US28 RO 1 Surface Overhead Stop 10-X36 630 RF 2 Door Closer (Pull Side) 7500 689 NO 2 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Wall Stop 409 US32D RO 1 Gasketing S773D PE 1 Astragal 357SS x S88D PE 1 Electric Power Transfer EL-EPT SU 1 Wire Harness (THRU DOOR) CON-LENGTH AS REQUIRED VD 1 Wire Harness (POWER SUPPLY) CON-192 VD 1 Wire Harness (POWER SUPPLY EXTENSION) CON-6W VD 2 Position Switch DPS-W/M-CAS SU 1 Card Reader SUPPLIED BY DIVISION 28 OT 1 Power Supply SUPPLIED BY DIVISION 28 OT Set: 26.0 6 Hinge TA2714 NRP US26D MK 1 Fire Rated Mortise Exit 9875NL-F 996L-NL-16 US32D VD 1 Fire Rated Conc Vert Rod 9847EO-F US32D VD 1 Permanent Core 23-030 626 SC 1 Cylinder (MORTISE) 20-061 ICX 626 SC 1 Coordinator 2600 SERIES x WEAR PLATES US28 RO 2 Mounting Bracket 2601AB/C US28 RO 2 Door Closer (Push Side) PR7500 689 NO 2 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 2 Wall Stop 409 US32D RO 1 Gasketing S773D PE 1 Astragal 357SS x S88D PE Set: 27.0 6 Hinge TA2714 NRP US26D MK 1 Dust Proof Strike 570 US26D RO 1 Flush Bolt 2845/2945 US26D RO 1 Mortise Lock (STOREROOM) L9080T OME/A 630 SC








































jessicalmartinez

Permit Number Batch



1 Permanent Core 23-030 626 SC 1 Coordinator 2600 SERIES x WEAR PLATES US28 RO 2 Surface Overhead Stop 10-X36 630 RF 2 Door Closer (Pull Side) 7500 689 NO 2 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Gasketing S773D PE 1 Astragal 357SS x S88D PE Set: 28.0 6 Hinge (heavy weight) T4A3786 NRP US26D MK 1 Dust Proof Strike 570 US26D RO 1 Flush Bolt 2845/2945 US26D RO 1 Mortise Lock (STOREROOM) L9080T OME/A 630 SC 1 Permanent Core 23-030 626 SC 1 Coordinator 2600 SERIES x WEAR PLATES US28 RO 2 Mounting Bracket 2601AB/C US28 RO 2 Door Closer (Push Side) PR7500 689 NO 2 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 2 Wall Stop 409 US32D RO 1 Gasketing S773D PE 1 Astragal 357SS x S88D PE Set: 29.0 2 Continuous Hinge FM300 CTP CTP 630 MR 2 EM Multi-Point Lock ELR ELR LC 12 NB 55 707315 (ELR-FS-REX) ETMO 106 US26D SA 2 Permanent Core 23-030 626 SC 2 Cylinder (MORTISE) 20-061 ICX 626 SC 1 Concealed Overhead Stop 1-X36 630 RF 1 Automatic Opener (PUSH SIDE) 9553 HL/D LONG2 ANCLR LC 2 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Wall Stop 409 US32D RO 1 Gasketing S773D PE 1 Astragal S772D PE 4 Electric Power Transfer EL-EPT SU 4 Wire Harness (THRU DOOR) CON-LENGTH AS REQUIRED VD 4 Wire Harness (POWER SUPPLY) CON-192 VD 4 Wire Harness (POWER SUPPLY EXTENSION) CON-6W VD 2 Position Switch DPS-W/M-CAS SU 1 Card Reader SUPPLIED BY DIVISION 28 OT 1 Touchless Actuator 8310-813 LC 1 Power Supply SUPPLIED BY DIVISION 28 OT Set: 30.0 6 Hinge (heavy weight) T4A3786 US26D MK






































jessicalmartinez

Permit Number Batch



1 Dust Proof Strike 570 US26D RO 1 Flush Bolt 2845/2945 US26D RO 1 Mortise Lock (PASSAGE) L9010 OME/A 630 SC 1 Coordinator 2600 SERIES x WEAR PLATES US28 RO 2 Door Closer (Pull Side) 7500 689 NO 2 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 2 Wall Stop 409 US32D RO 2 Electromagnetic Holder 998 TRI-VOLT x SPACER EXT 689 RF At 2.210.3 1 Gasketing S773D PE 1 Astragal S772D PE Notes: Elecromagnetic Holder at 2.210.3 Set: 31.0 6 Hinge (heavy weight) T4A3786 US26D MK 1 Dust Proof Strike 570 US26D RO 1 Flush Bolt 2845/2945 US26D RO 1 Mortise Lock (STOREROOM) L9080T OME/A 630 SC 1 Permanent Core 23-030 626 SC 1 Coordinator 2600 SERIES x WEAR PLATES US28 RO 1 Surface Overhead Stop 10-X36 630 RF 2 Door Closer (Pull Side) 7500 689 NO 2 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Wall Stop 409 US32D RO 1 Gasketing S773D PE 1 Astragal 357SS x S88D PE Set: 32.0 3 Hinge (heavy weight) T4A3786 NRP US26D MK 1 EM Exit Device RX 9875L-F E996L-16 FS CON US32D VD (MORTISE-UL-SAF-REX) 1 Permanent Core 23-030 626 SC 1 Cylinder (MORTISE) 20-061 ICX 626 SC 1 Concealed Overhead Stop 1-X36 630 RF 1 Door Closer (Push Side) PR7500 689 NO 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Gasketing S88D PE 1 Electric Power Transfer EL-EPT SU 1 Wire Harness (THRU RAIL) CON-6 VD 1 Wire Harness (POWER SUPPLY) CON-192 VD 1 Wire Harness (POWER SUPPLY EXTENSION) CON-6W VD 1 Position Switch DPS-W/M-CAS SU 1 Card Reader SUPPLIED BY DIVISION 28 OT 1 Power Supply SUPPLIED BY DIVISION 28 OT





































jessicalmartinez

Permit Number Batch



Set: 33.0 3 Hinge (heavy weight) T4A3786 NRP US26D MK 1 EM Exit Device RX 9875L-F E996L-16 FS CON US32D VD (MORTISE-UL-SAF-REX) 1 Permanent Core 23-030 626 SC 1 Cylinder (MORTISE) 20-061 ICX 626 SC 1 Concealed Overhead Stop 1-X36 630 RF 1 Automatic Opener (PUSH SIDE) 9542 HL/D LONG ANCLR LC 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Wall Stop 409 US32D RO 1 Gasketing S773D PE 1 Electric Power Transfer EL-EPT SU 1 Wire Harness (THRU RAIL) CON-6 VD 1 Wire Harness (POWER SUPPLY) CON-192 VD 1 Wire Harness (POWER SUPPLY EXTENSION) CON-6W VD 1 Position Switch DPS-W/M-CAS SU 1 Card Reader SUPPLIED BY DIVISION 28 OT 1 Touchless Actuator 8310-813 LC 1 Power Supply PS914 900-4RL-FA VD Set: 34.0 Set Not Used Set: 35.0 1 Continuous Hinge FM300 CTP 630 MR 1 EM Mortise Lock L9080T OME/A RX 630 SC (STOREROOM-REX) 1 Permanent Core 23-030 626 SC 1 Door Closer (Pull Side) 7500 689 NO 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Wall Stop 409 US32D RO 1 Threshold 2748A MSES25SS PE (VERIFY FLOOR CONDITION) 1 Rain Guard 346C PE 1 Gasketing 290AS (@ HEAD & JAMBS) PE 1 Door Bottom 216BDCFG PE 1 Electric Power Transfer EL-EPT SU 1 Wire Harness (THRU DOOR) CON-LENGTH AS REQUIRED VD 1 Wire Harness (POWER SUPPLY) CON-192 VD 1 Wire Harness (POWER SUPPLY EXTENSION) CON-6W VD 1 Position Switch DPS-W/M-CAS SU 1 Power Supply SUPPLIED BY DIVISION 28 OT Set: 36.0 1 Continuous Hinge FM300 CTP 630 MR 1 EM Exit Device (RIM-LD-NL-REX)LD RX 98NL 990NL CON US32D VD



































jessicalmartinez

Permit Number Batch



1 Cylinder (RIM) 20-057 ICX 626 SC 1 Permanent Core 23-030 626 SC 1 Concealed Overhead Stop 1-X36 630 RF 1 Door Closer (Push Side) PR7500 689 NO 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Threshold 2748A MSES25SS PE (VERIFY FLOOR CONDITION) 1 Rain Guard 346C PE 1 Gasketing 2891AS (@ HEAD & JAMBS) PE 1 Door Bottom 216BDCFG PE 1 Electric Power Transfer EL-EPT SU 1 Wire Harness (THRU RAIL) CON-6 VD 1 Wire Harness (POWER SUPPLY) CON-192 VD 1 Wire Harness (POWER SUPPLY EXTENSION) CON-6W VD 1 Position Switch DPS-W/M-CAS SU 1 Power Supply SUPPLIED BY DIVISION 28 OT Set: 37.0 1 Continuous Hinge FM300 630 MR 1 Exit Device (RIM-LD-NL) LD 98NL 990NL US32D VD 1 Cylinder (RIM) 20-057 ICX 626 SC 1 Permanent Core 23-030 626 SC 1 Concealed Overhead Stop 1-X36 630 RF 1 Door Closer (Push Side) PR7500 689 NO 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Threshold 272A MSES25SS PE (VERIFY FLOOR CONDITION) 1 Rain Guard 346C PE 1 Gasketing 2891AS (@ HEAD & JAMBS) PE 1 Door Bottom 216BDCFG PE 1 Position Switch DPS-W/M-CAS SU Set: 38.0 1 Continuous Hinge FM300 CTP 630 MR 1 EM Exit Device LD RX QEL98NL-OP CON US32D VD (RIM-LD-QEL-FSE-REX) 1 Cylinder (RIM) 20-057 ICX 626 SC 1 Permanent Core 23-030 626 SC 1 Pull (GROOVE-STRAIGHT) RM3101 Mtg-Type 6HD MP US32D RO (COORDINATE LENGTH & CTC W/ARCHITECT) 1 Concealed Overhead Stop 1-X36 630 RF 1 Door Closer (Push Side) PR7500 689 NO 1 Threshold 271A MSES25SS PE (VERIFY FLOOR CONDITION) 1 Rain Guard 346C PE 1 Weatherstrip and Door Bottom System SUPPLIED BY DOOR MFG/SUPPLIER OT 1 Wire Harness (THRU RAIL) CON-6 VD





































jessicalmartinez

Permit Number Batch



1 Wire Harness (POWER SUPPLY) CON-192 VD 1 Wire Harness (POWER SUPPLY EXTENSION) CON-6W VD 1 Position Switch DPS-W/M-CAS SU 1 Power Supply PS914 900-4RL-FA VD Set: 39.0 1 Continuous Hinge FM300 CTP 630 MR 1 EM Mortise Lock (FSE-REX) L9092EUT OME/A RX 630 SC 1 Permanent Core 23-030 626 SC 1 Concealed Overhead Stop 1-X36 630 RF 1 Door Closer (Push Side) PR7500 689 NO 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Threshold 2748A MSES25SS PE (VERIFY FLOOR CONDITION) 1 Rain Guard 346C PE 2 Gasketing 290AS (@ JAMBS) PE 1 Gasketing 2891AS (@ HEAD) PE 1 Door Bottom 216BDCFG PE 1 Electric Power Transfer EL-EPT SU 1 Wire Harness (THRU DOOR) CON-LENGTH AS REQUIRED VD 1 Wire Harness (POWER SUPPLY) CON-192 VD 1 Wire Harness (POWER SUPPLY EXTENSION) CON-6W VD 1 Position Switch DPS-W/M-CAS SU 1 Card Reader SUPPLIED BY DIVISION 28 OT 1 Power Supply SUPPLIED BY DIVISION 28 OT Set: 40.0 2 Pivot Set 147 626 RF 6 Intermediate Pivot M19 626 RF 2 Pull (GROOVE-OFFSET) RM3131 Mtg-Type 6HD MP US32D RO (COORDINATE LENGTH & CTC W/ARCHITECT) 2 Push Bar RM3340 Mtg-Type 6HD US32D RO (COORDINATE CTC W/ARCHITECT) 2 Concealed Overhead Stop 1-X36 630 RF 2 Door Closer (Push Side TJ) J7500 689 NO 1 Weatherstrip and Door Bottom System SUPPLIED BY DOOR MFG/SUPPLIER OT Set: 40.0 CD-026 2 Pull (GROOVE-OFFSET) RM3131 Mtg-Type 6HD MP US32D RO (COORDINATE LENGTH & CTC W/ARCHITECT) 2 Push Bar RM3340 Mtg-Type 6HD US32D RO (COORDINATE CTC W/ARCHITECT) 1 Threshold 272A MSES25SS PE (VERIFY FLOOR CONDITION) 1 Balance of Hardware SUPPLIED BY DOOR MFG/SUPPLIER OT




























jessicalmartinez

Permit Number Batch



Set: 41.0 1 Continuous Hinge FM300 CTP 630 MR 1 EM Mortise Lock (FSE-REX) L9092EUT OME/A RX 630 SC 1 Permanent Core 23-030 626 SC 1 Concealed Overhead Stop 1-X36 630 RF 1 Door Closer (Push Side) PR7500 689 NO 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Threshold 2748A MSES25SS PE (VERIFY FLOOR CONDITION) 1 Rain Guard 346C PE 1 Gasketing 2891AS (@ HEAD & JAMBS) PE 1 Door Bottom 216BDCFG PE 1 Electric Power Transfer EL-EPT SU 1 Wire Harness (THRU DOOR) CON-LENGTH AS REQUIRED VD 1 Wire Harness (POWER SUPPLY) CON-192 VD 1 Wire Harness (POWER SUPPLY EXTENSION) CON-6W VD 1 Position Switch DPS-W/M-CAS SU 1 Card Reader SUPPLIED BY DIVISION 28 OT 1 Power Supply SUPPLIED BY DIVISION 28 OT Set: 42.0 1 Continuous Hinge FM300 CTP 630 MR 1 EM Exit Device LD RX 98L E996L-16 FSE CON US32D VD (RIM-LD-FSE-REX) 1 Cylinder (RIM) 20-057 ICX 626 SC 1 Permanent Core 23-030 626 SC 1 Concealed Overhead Stop 1-X36 630 RF 1 Door Closer (Push Side) PR7500 689 NO 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Threshold 276A MSES25 PE (VERIFY FLOOR CONDITION) 1 Rain Guard 346C PE 1 Gasketing 2891AS (@ HEAD & JAMBS) PE 1 Door Bottom 216BDCFG PE 1 Electric Power Transfer EL-EPT SU 1 Wire Harness (THRU RAIL) CON-6 VD 1 Wire Harness (POWER SUPPLY) CON-192 VD 1 Wire Harness (POWER SUPPLY EXTENSION) CON-6W VD 1 Position Switch DPS-W/M-CAS SU 1 Card Reader SUPPLIED BY DIVISION 28 OT 1 Power Supply SUPPLIED BY DIVISION 28 OT Set: 43.0 1 Pivot Set 147 626 RF 2 Intermediate Pivot M19 626 RF 1 EM Exit Device LD RX QEL 35A-NL-OP CON US32D VD





































jessicalmartinez

Permit Number Batch



(RIM-LD-QEL-REX-FSE) 1 Cylinder (RIM) 20-057 ICX 626 SC 1 Permanent Core 23-030 626 SC 1 Pull (GROOVE-STRAIGHT) RM3101 Mtg-Type 6HD MP US32D RO (COORDINATE LENGTH & CTC W/ARCHITECT) 1 Concealed Overhead Stop 1-X36 630 RF 1 Door Closer (Push Side TJ) J7500 689 NO 1 Threshold 271A MSES25SS PE (VERIFY FLOOR CONDITION) 1 Rain Guard 346C PE 1 Weatherstrip and Door Bottom System SUPPLIED BY DOOR MFG/SUPPLIER OT 1 Electric Power Transfer EL-EPT SU 1 Wire Harness (THRU RAIL) CON-6 VD 1 Wire Harness (POWER SUPPLY) CON-192 VD 1 Wire Harness (POWER SUPPLY EXTENSION) CON-6W VD 1 Position Switch DPS-W/M-CAS SU 1 Card Reader SUPPLIED BY DIVISION 28 OT 1 Power Supply PS914 900-4RL VD Set: 43.1 1 Pivot Set 147 626 RF 2 Intermediate Pivot M19 626 RF 1 Rim Exit Device LD 35A-EO US26D VD 1 Concealed Overhead Stop 1-X36 630 RF 1 Door Closer (Push Side TJ) J7500 689 NO 1 Threshold 271A MSES25SS PE (VERIFY FLOOR CONDITION) 1 Rain Guard 346C PE 1 Weatherstrip and Door Bottom System SUPPLIED BY DOOR MFG/SUPPLIER OT 1 Position Switch DPS-W/M-CAS SU Set: 44.0 1 Continuous Hinge FM300 CTP 630 MR 1 EM Mortise Lock L9080T OME/A RX 630 SC (STOREROOM-REX) 1 Permanent Core 23-030 626 SC 1 Concealed Overhead Stop 1-X36 630 RF 1 Door Closer (Push Side) PR7500 689 NO 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Gasketing S88D PE 1 Rain Guard 346C PE 1 Door Bottom 216BDCFG PE 1 Electric Power Transfer EL-EPT SU 1 Wire Harness (THRU DOOR) CON-LENGTH AS REQUIRED VD 1 Wire Harness (POWER SUPPLY) CON-192 VD 1 Wire Harness (POWER SUPPLY EXTENSION) CON-6W VD 1 Position Switch DPS-W/M-CAS SU



































jessicalmartinez

Permit Number Batch



1 Power Supply SUPPLIED BY DIVISION 28 OT Set: 45.0 1 Continuous Hinge FM300 630 MR 1 Mortise Lock (STOREROOM) L9080T OME/A 630 SC 1 Permanent Core 23-030 626 SC 1 Concealed Overhead Stop 1-X36 630 RF 1 Door Closer (Push Side) PR7500 689 NO 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Threshold 276A MSES25 PE (VERIFY FLOOR CONDITION) 1 Rain Guard 346C PE 2 Gasketing 290AS (@ JAMBS) PE 1 Gasketing 2891AS (@ HEAD) PE 1 Door Bottom 216BDCFG PE 1 Position Switch DPS-W/M-CAS SU Set: 46.0 2 Continuous Hinge FM300 630 MR 1 Exit Device (CVR-LD-EO) LD 9847EO US32D VD 1 Exit Device (MORTISE-LD-NL) LD 9875L-NL 996L-NL-16 US32D VD 1 Permanent Core 23-030 626 SC 1 Cylinder (MORTISE) 20-061 ICX 626 SC 1 Coordinator 3092 US32D TC 2 Surface Overhead Stop 10-X36 630 RF 2 Door Closer (Push Side) PR7500 689 NO 2 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Threshold 2748A MSES25SS PE (VERIFY FLOOR CONDITION) 1 Rain Guard 346C PE 2 Gasketing 290AS (@ JAMBS) PE 1 Gasketing 2891AS (@ HEAD) PE 2 Door Bottom 216BDCFG PE 1 Astragal 357SS x S88D PE 2 Position Switch DPS-W/M-CAS SU Set: 47.0 2 Continuous Hinge FM300 630 MR 1 Dust Proof Strike 570 US26D RO 1 Flush Bolt 2845/2945 US26D RO 1 Mortise Lock (STOREROOM) L9080T OME/A 630 SC 1 Permanent Core 23-030 626 SC 1 Cylinder (MORTISE) 20-061 ICX 626 SC 1 Coordinator 3092 US32D TC 2 Surface Overhead Stop 10-X36 630 RF 2 Door Closer (Push Side) PR7500 689 NO






































jessicalmartinez

Permit Number Batch



2 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Threshold 2748A MSES25SS PE (VERIFY FLOOR CONDITION) 1 Rain Guard 346C PE 2 Gasketing 290AS (@ JAMBS) PE 1 Gasketing 2891AS (@ HEAD) PE 2 Door Bottom 216BDCFG PE 1 Astragal 357SS x S88D PE 2 Position Switch DPS-W/M-CAS SU Set: 48.0 2 Pivot Set 147 626 RF 4 Intermediate Pivot M19 626 RF 1 EM Exit Device LD QEL RX 3547A-EO CON US26D VD (CVR-LD-QEL-REX) 1 EM Exit Device LD QEL RX 3547A-NL-OP CON US26D VD (CVR-LD-QEL-REX-FSE) 1 Cylinder (RIM) 20-057 ICX 626 SC 1 Permanent Core 23-030 626 SC 2 Pull (GROOVE-OFFSET) RM3131 Mtg-Type 6HD MP US32D RO (COORDINATE LENGTH & CTC W/ARCHITECT) 2 Concealed Overhead Stop 1-X36 630 RF 2 Door Closer (Push Side) PR7500 689 NO 1 Threshold 271A MSES25SS PE (VERIFY FLOOR CONDITION) 1 Rain Guard 346C PE 1 Weatherstrip and Door Bottom System SUPPLIED BY DOOR MFG/SUPPLIER OT 1 Electric Power Transfer EL-EPT SU 2 Wire Harness (THRU RAIL) CON-6 VD 2 Wire Harness (POWER SUPPLY) CON-192 VD 2 Wire Harness (POWER SUPPLY EXTENSION) CON-6W VD 2 Position Switch DPS-W/M-CAS SU 1 Circuits SUPPLIED BY DIVISION 28 OT 2 Power Supply PS914 900-4RL-FA VD Notes: Door normally closed and locked with free egress at all times. Doors to be electrically dogged down remotely during day. Doors remained locked with loss of power. Set: 48.0 CD-026 1 EM Exit Device LD QEL RX 3547A-EO CON US26D VD (CVR-LD-QEL-REX) 1 EM Exit Device LD QEL RX 3547A-NL-OP CON US26D VD (CVR-LD-QEL-REX-FSE) 1 Cylinder (RIM) 20-057 ICX 626 SC 1 Permanent Core 23-030 626 SC 2 Pull (GROOVE-OFFSET) RM3131 Mtg-Type 6HD MP US32D RO (COORDINATE LENGTH & CTC W/ARCHITECT)





























jessicalmartinez

Permit Number Batch



1 Threshold 272A MSES25SS PE (VERIFY FLOOR CONDITION) 1 Rain Guard 346C PE 1 Position Switch DPS-W/M-CAS SU 1 Power Supply PS914 900-4RL-FA VD 1 Balance of Hardware SUPPLIED BY DOOR MFG/SUPPLIER OT Set: 49.0 Doors: 9.111 2 Continuous Hinge FM300 CTP 630 MR 1 EM Exit Device LD QEL RX 9847-EO F CON US26D VD (CVR-LD-QEL-REX) 1 EM Exit Device LD QEL RX 9847-NL-OP F CON US26D VD CVR-LD-QEL-REX-FSE) 1 Cylinder (RIM) 20-057 ICX 626 SC 1 Permanent Core 23-030 626 SC 1 Pull VRT US32D RO 1 Full Auto Operator with wave actuator inside sw200i series with all accessories BM 2 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Threshold 272A MSES25 PE (VERIFY FLOOR CONDITION) 1 Weatherstrip 290AS PE 1 Astragal 18041 PE 1 Door Sweep 315CN PE 2 Electric Power Transfer EL-EPT SU 2 Wire Harness (THRU RAIL) CON-6 VD 2 Wire Harness (POWER SUPPLY) CON-192 VD 2 Wire Harness (POWER SUPPLY EXTENSION) CON-6W VD 2 Position Switch DPS-W/M-CAS SU 1 Power Supply PS914 900-4RL-FA VD Notes: Door to be full automatic operation from exterior side and wave actuator on interior. Set: 50.0 1 Continuous Hinge FM300 CTP 630 MR 1 Continuous Hinge FM300 630 MR 1 Dust Proof Strike 570 US26D RO 1 Flush Bolt 2845/2945 US26D RO 1 EM Exit Device LD RX QEL 9875NL 990NL US32D VD (MORTISE-LD-QEL-REX-FSE) FSE CON 1 Permanent Core 23-030 626 SC 1 Cylinder (MORTISE) 20-061 ICX 626 SC 1 Coordinator 2600 SERIES x WEAR PLATES US28 RO 2 Concealed Overhead Stop 1-X36 630 RF 1 Automatic Opener (PUSH SIDE) 9542 HL/D LONG ANCLR LC 2 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Threshold 2748A MSES25SS PE









https://content.assaabloyusa.com/doc/AADSS1045892&.pdf

https://www.assaabloydooraccessories.us/en/products/astragals-weatherstrip/split-astragal-seals/18041-nb-ms/



















jessicalmartinez

Permit Number Batch



(VERIFY FLOOR CONDITION) 1 Rain Guard 346C PE 2 Gasketing 290AS (@ JAMBS) PE 1 Gasketing 2891AS (@ HEAD) PE 2 Door Bottom 216BDCFG PE 1 Astragal 357SS x S88D PE 1 Electric Power Transfer EL-EPT SU 1 Wire Harness (THRU DOOR) CON-LENGTH AS REQUIRED VD 1 Wire Harness (POWER SUPPLY) CON-192 VD 1 Wire Harness (POWER SUPPLY EXTENSION) CON-6W VD 2 Position Switch DPS-W/M-CAS SU 1 Keyswitch MKA SU 1 Touchless Actuator 8310-813 LC 1 Power Supply PS914 900-4RL-FA VD Set: 51.0 1 All Door Hardware SUPPLIED BY DOOR MFG/SUPPLIER OT Set: 52.0 1 Door Hardware NO DOOR HARDWARE REQUIRED OT Set: 53.0 3 Hinge (heavy weight) T4A3786 US26D MK 1 Mortise Lock L9040 L583-363 OME/A L283-722 630 SC (PRIVACY W/IND x ADA T-TURN) 1 Door Closer (Push Side) PR7500 689 NO 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Wall Stop 409 US32D RO 1 Gasketing S773D PE Set: 54.0 3 Hinge (heavy weight) T4A3786 US26D MK 1 Mortise Lock L9040 L583-363 OME/A L283-722 630 SC (PRIVACY W/IND x ADA T-TURN) 1 Door Closer (Pull Side) 7500 689 NO 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Mop Plate (UL) K1050 F 4" 4BE CSK US32D RO 1 Wall Stop 409 US32D RO 1 Gasketing S773D PE Set: 55.0 3 Hinge (heavy weight) T4A3786 US26D MK 1 Mortise Lock (PASSAGE) L9010 OME/A 630 SC 1 Door Closer (Push Side) PR7500 689 NO






























jessicalmartinez

Permit Number Batch



1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Wall Stop 409 US32D RO 1 Gasketing S773D PE Set: 56.0 3 Hinge (heavy weight) T4A3786 US26D MK 1 Push Pull 111x73C/73CL US32D RO 1 Door Closer (Pull Side) 7500 689 NO 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Mop Plate (UL) K1050 F 4" 4BE CSK US32D RO 1 Wall Stop 409 US32D RO 1 Gasketing S773D PE Set: 57.0 3 Hinge (heavy weight) T4A3786 US26D MK 1 Mortise Lock L9040 L583-363 OME/A L283-722 630 SC (PRIVACY W/IND x ADA T-TURN) 1 Concealed Overhead Stop 1-X36 630 RF 1 Door Closer (Push Side) PR7500 689 NO 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Gasketing S773D PE Set: 58.0 3 Hinge (heavy weight) T4A3786 US26D MK 1 Mortise Lock L9040 L583-363 OME/A L283-722 630 SC (PRIVACY W/IND x ADA T-TURN) 1 Surface Overhead Stop 10-X36 630 RF 1 Door Closer (Pull Side) 7500 689 NO 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Mop Plate (UL) K1050 F 4" 4BE CSK US32D RO 1 Gasketing S773D PE Set: 59.0 3 Hinge (heavy weight) T4A3386 US32D MK 1 Mortise Lock L9040 L583-363 OME/A L283-722 630 SC (PRIVACY W/IND x ADA T-TURN) 1 Concealed Overhead Stop 1-X36 630 RF 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Gasketing S773D PE Set: 59.1 3 Hinge (heavy weight) T4A3386 US32D MK 1 Mortise Lock L9040 L583-363 OME/A L283-722 630 SC (PRIVACY W/IND x ADA T-TURN)































jessicalmartinez

Permit Number Batch



1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Wall Stop 409 US32D RO 1 Gasketing S773D PE Set: 60.0 3 Hinge (heavy weight) T4A3386 US32D MK 1 Mortise Lock L9040 L583-363 OME/A L283-722 630 SC (PRIVACY W/IND x ADA T-TURN) 1 Concealed Overhead Stop 1-X36 630 RF 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Mop Plate (UL) K1050 F 4" 4BE CSK US32D RO 1 Gasketing S773D PE Set: 61.0 3 Hinge (heavy weight) T4A3386 US32D MK 1 Mortise Lock L9040 L583-363 OME/A L283-722 630 SC (PRIVACY W/IND x ADA T-TURN) 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Mop Plate (UL) K1050 F 4" 4BE CSK US32D RO 1 Wall Stop 409 US32D RO 1 Gasketing S773D PE Set: 62.0 1 Double Acting Hinge DSHP01C PE 1 Mortise Lock L9040 L583-363 OME/A L283-722 630 SC (PRIVACY W/IND x ADA T-TURN) 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Mop Plate (UL) K1050 F 4" 4BE CSK US32D RO 1 Wall Stop 409 US32D RO 1 Emergency Stop ERS120CxHT PE 1 Gasketing S773D PE Set: 63.0 1 Double Acting Hinge DSHP01C PE 1 Mortise Lock L9040 L583-363 OME/A L283-722 630 SC (PRIVACY W/IND x ADA T-TURN) 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Wall Stop 409 US32D RO 1 Emergency Stop ERS120CxHT PE 3 Silencer 608 RO Set: 64.0 3 Hinge (heavy weight) T4A3386 US32D MK 1 Push Pull 111x73C/73CL US32D RO































jessicalmartinez

Permit Number Batch



1 Door Closer (Pull Side) 7500 689 NO 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Mop Plate (UL) K1050 F 4" 4BE CSK US32D RO 1 Wall Stop 409 US32D RO 1 Gasketing S773D PE Set: 65.0 3 Hinge (heavy weight) T4A3786 US26D MK 1 Mortise Lock L9040 L583-363 OME/A L283-722 630 SC (PRIVACY W/IND x ADA T-TURN) 1 Wall Stop 409 US32D RO 1 Gasketing S773D PE 1 Gasketing ACP112BL/2 PE 1 Gasketing S44D PE 1 Door Bottom PDB411AE PE Set: 66.0 3 Hinge (heavy weight) T4A3786 US26D MK 1 Mortise Lock L9040 L583-363 OME/A L283-722 630 SC (PRIVACY W/IND x ADA T-TURN) 1 Concealed Overhead Stop 1-X36 630 RF 1 Gasketing S773D PE 1 Gasketing ACP112BL/2 PE 1 Gasketing S44D PE 1 Door Bottom PDB411AE PE Set: 67.0 3 Hinge (heavy weight) T4A3786 US26D MK 1 Mortise Lock (PASSAGE) L9010 OME/A 630 SC 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Wall Stop 409 US32D RO 1 Gasketing S773D PE 1 Gasketing ACP112BL/2 PE 1 Gasketing S44D PE 1 Door Bottom PDB411AE PE Set: 68.0 3 Hinge (heavy weight) T4A3786 US26D MK 1 Mortise Lock L9040 L583-363 OME/A L283-722 630 SC (PRIVACY W/IND x ADA T-TURN) 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Wall Stop 409 US32D RO 1 Gasketing S773D PE 1 Gasketing ACP112BL/2 PE 1 Gasketing S44D PE



































jessicalmartinez

Permit Number Batch



1 Door Bottom PDB411AE PE Set: 69.0 1 Pivot Set 147 626 RF 3 Intermediate Pivot M19 626 RF 1 EM Exit Device LD RX QEL 35A-NL-OP CON US32D VD (RIM-LD-QEL-REX-FSE) 1 Cylinder (RIM) 20-057 ICX 626 SC 1 Permanent Core 23-030 626 SC 1 Pull (GROOVE-STRAIGHT) RM3101 Mtg-Type 6HD MP US32D RO (COORDINATE LENGTH & CTC W/ARCHITECT) 1 Concealed Overhead Stop 1-X36 630 RF 1 Door Closer (Push Side TJ) J7500 689 NO 1 Threshold 272A MSES25SS PE (VERIFY FLOOR CONDITION) 1 Rain Guard 346C PE 1 Weatherstrip and Door Bottom System SUPPLIED BY DOOR MFG/SUPPLIER OT 1 Electric Power Transfer EL-EPT SU 1 Wire Harness (THRU RAIL) CON-6 VD 1 Wire Harness (POWER SUPPLY) CON-192 VD 1 Wire Harness (POWER SUPPLY EXTENSION) CON-6W VD 1 Position Switch DPS-W/M-CAS SU 1 Circuits SUPPLIED BY DIVISION 28 OT 1 Power Supply PS914 900-4RL VD Set: 69.0 CD-026 1 EM Exit Device LD RX QEL 35A-NL-OP CON US32D VD (RIM-LD-QEL-REX-FSE) 1 Cylinder (RIM) 20-057 ICX 626 SC 1 Permanent Core 23-030 626 SC 1 Pull (GROOVE-STRAIGHT) RM3101 Mtg-Type 6HD MP US32D RO (COORDINATE LENGTH & CTC W/ARCHITECT) 1 Threshold 272A MSES25SS PE (VERIFY FLOOR CONDITION) 1 Rain Guard 346C PE 1 Position Switch DPS-W/M-CAS SU 1 Power Supply PS914 900-4RL VD 1 Balance of Hardware SUPPLIED BY DOOR MFG/SUPPLIER OT Set: 70.0 3 Hinge (heavy weight) T4A3386 US32D MK 1 Mortise Lock L9040 L583-363 OME/A L283-722 630 SC (PRIVACY W/IND x ADA T-TURN) 1 Door Closer (Pull Side) 7500 689 NO 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Mop Plate (UL) K1050 F 4" 4BE CSK US32D RO





























jessicalmartinez

Permit Number Batch



1 Wall Stop 409 US32D RO 1 Gasketing S773D PE Set: 71.0 3 Hinge (heavy weight) T4A3786 US26D MK 1 Mortise Lock (PASSAGE) L9010 OME/A 630 SC 1 Door Closer (Pull Side) 7500 689 NO 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Mop Plate (UL) K1050 F 4" 4BE CSK US32D RO 1 Wall Stop 409 US32D RO 1 Gasketing S773D PE Set: 72.0 3 Hinge (heavy weight) T4A3786 US26D MK 1 Mortise Lock (PASSAGE) L9010 OME/A 630 SC 1 Concealed Overhead Stop 1-X36 630 RF 1 Door Closer (Push Side) PR7500 689 NO 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Mop Plate (UL) K1050 F 4" 4BE CSK US32D RO 1 Gasketing S773D PE Set: 73.0 3 Hinge (heavy weight) T4A3786 NRP US26D MK 1 Mortise Lock (CLASSROOM) L9070 T OME/A 630 SC 1 Permanent Core 23-030 626 SC 1 Door Closer (Push Side) PR7500 689 NO 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Wall Stop 409 US32D RO 1 Gasketing S773D PE Set: 74.0 3 Hinge (heavy weight) T4A3786 US26D MK 1 Mortise Lock L9056 T L583-363 OME/A 630 SC (OFFC W/AUTO UNLOCK x ADA T-TURN) 1 Permanent Core 23-030 626 SC 1 Wall Stop 409 US32D RO 1 Gasketing S773D PE Set: 75.0 3 Hinge (heavy weight) T4A3786 US26D MK 1 Mortise Lock (CLASSROOM) L9070 T OME/A 630 SC 1 Permanent Core 23-030 626 SC 1 Door Closer (Pull Side) 7500 689 NO 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO


































jessicalmartinez

Permit Number Batch



1 Wall Stop 409 US32D RO 1 Gasketing S773D PE Set: 76.0 3 Hinge (heavy weight) T4A3786 US26D MK 1 Mortise Lock L9056 T L583-363 OME/A 630 SC (OFFC W/AUTO UNLOCK x ADA T-TURN) 1 Permanent Core 23-030 626 SC 1 Door Closer (Pull Side) 7500 689 NO 1 Wall Stop 409 US32D RO 1 Gasketing S773D PE Set: 77.0 3 Hinge (heavy weight) T4A3786 US26D MK 1 Mortise Lock L9056 T L583-363 OME/A 630 SC (OFFC W/AUTO UNLOCK x ADA T-TURN) 1 Permanent Core 23-030 626 SC 1 Door Closer (Pull Side) 7500 689 NO 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Wall Stop 409 US32D RO 1 Gasketing S773D PE Set: 78.0 3 Hinge (heavy weight) T4A3786 US26D MK 1 Mortise Lock (CLASSROOM) L9070 T OME/A 630 SC 1 Permanent Core 23-030 626 SC 1 Surface Overhead Stop 10-X36 630 RF 1 Door Closer (Pull Side) 7500 689 NO 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Gasketing S773D PE Set: 79.0 3 Hinge (heavy weight) T4A3786 US26D MK 1 Mortise Lock (CLASSROOM) L9070 T OME/A 630 SC 1 Permanent Core 23-030 626 SC 1 Wall Stop 409 US32D RO 1 Gasketing S773D PE Set: 80.0 3 Hinge (heavy weight) T4A3786 US26D MK 1 Mortise Lock (CLASSROOM) L9070 T OME/A 630 SC 1 Permanent Core 23-030 626 SC 1 Surface Overhead Stop 10-X36 630 RF 1 Door Closer (Pull Side) 7500 689 NO

































jessicalmartinez

Permit Number Batch



1 Gasketing S773D PE Set: 81.0 3 Hinge (heavy weight) T4A3786 NRP US26D MK 1 Mortise Lock (CLASSROOM) L9070 T OME/A 630 SC 1 Permanent Core 23-030 626 SC 1 Concealed Overhead Stop 1-X36 630 RF 1 Door Closer (Push Side) PR7500 689 NO 1 Wall Stop 409 US32D RO 1 Gasketing S773D PE Notes: Omit wall stop at 3.310 Set: 82.0 3 Hinge (heavy weight) T4A3786 NRP US26D MK 1 Mortise Lock (STOREROOM) L9080T OME/A 630 SC 1 Permanent Core 23-030 626 SC 1 Concealed Overhead Stop 1-X36 630 RF 1 Door Closer (Push Side) PR7500 689 NO 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Gasketing S773D PE Set: 83.0 3 Hinge (heavy weight) T4A3786 NRP US26D MK 1 Mortise Lock (STOREROOM) L9080T OME/A 630 SC 1 Permanent Core 23-030 626 SC 1 Door Closer (Push Side) PR7500 689 NO 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Wall Stop 409 US32D RO 1 Gasketing S773D PE Set: 84.0 3 Hinge (heavy weight) T4A3786 US26D MK 1 Mortise Lock (STOREROOM) L9080T OME/A 630 SC 1 Permanent Core 23-030 626 SC 1 Door Closer (Pull Side) 7500 689 NO 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Mop Plate (UL) K1050 F 4" 4BE CSK US32D RO 1 Wall Stop 409 US32D RO 1 Gasketing S773D PE Set: 85.0 3 Hinge (heavy weight) T4A3786 US26D MK 1 Mortise Lock (STOREROOM) L9080T OME/A 630 SC

































jessicalmartinez

Permit Number Batch



1 Permanent Core 23-030 626 SC 1 Surface Overhead Stop 10-X36 630 RF 1 Door Closer (Pull Side) 7500 689 NO 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Mop Plate (UL) K1050 F 4" 4BE CSK US32D RO 1 Gasketing S773D PE Set: 86.0 3 Hinge (heavy weight) T4A3786 US26D MK 1 Mortise Lock (PASSAGE) L9010 OME/A 630 SC 1 Door Closer (Pull Side) 7500 689 NO 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Wall Stop 409 US32D RO 3 Silencer 608 RO Set: 87.0 3 Hinge (heavy weight) T4A3786 US26D MK 1 Mortise Lock (PASSAGE) L9010 OME/A 630 SC 1 Concealed Overhead Stop 1-X36 630 RF 1 Wall Stop 409 US32D RO 1 Gasketing S773D PE 3 Silencer 608 RO Notes: Omit Concealed Overhead stop at 3.503.1, include Wall Stop. Omit Gasketing at 3.503.1 , include Silencers Set: 88.0 3 Hinge (heavy weight) T4A3786 NRP US26D MK 1 Mortise Lock (CLASSROOM) L9070 T OME/A 630 SC 1 Permanent Core 23-030 626 SC 1 Concealed Overhead Stop 1-X36 630 RF 1 Wall Stop 409 US32D RO 1 Gasketing S773D PE Notes: Omit Wall Stop at 3.301, include Concealed Overhead Stop Set: 89.0 3 Hinge (heavy weight) T4A3786 US26D MK 1 Mortise Lock L9056 T L583-363 OME/A 630 SC (OFFC W/AUTO UNLOCK x ADA T-TURN) 1 Permanent Core 23-030 626 SC 1 Concealed Overhead Stop 1-X36 630 RF 1 Wall Stop 409 US32D RO 1 Gasketing S773D PE































jessicalmartinez

Permit Number Batch



Notes: Omit Concealed Overhead Stop at 2.952, include Wall Stop. Set: 90.0 3 Hinge (heavy weight) T4A3386 US32D MK 3 Hinge TA2314 US32D MK 2 Flush Bolt 555 US26D RO 1 Dust Proof Strike 570 US26D RO 1 Mortise Lock (PASSAGE) L9010 OME/A 630 SC 2 Concealed Overhead Stop 1-X36 630 RF 2 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Gasketing S773D PE 1 Astragal S772D PE Set: 91.0 3 Hinge (heavy weight) T4A3786 US26D MK 1 Mortise Lock HL6-9010 US32D GJ (Passage-Hospital Paddle) (Coordinate Paddle MTG Position w/Architect) 1 Concealed Overhead Stop 1-X36 630 RF 1 Door Closer (Push Side) PR7500 689 NO 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Gasketing S773D PE 1 Gasketing S44D PE 1 Door Bottom 411APKL/420APKL PE Set: 92.0 3 Hinge (heavy weight) T4A3786 US26D MK 1 Mortise Lock HL6-9010 US32D GJ (Passage-Hospital Paddle) (Coordinate Paddle MTG Position w/Architect) 1 Door Closer (Pull Side) 7500 689 NO 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Wall Stop 409 US32D RO 1 Gasketing S773D PE 1 Door Bottom 411APKL/420APKL PE Set: 93.0 1 Continuous Hinge HG305 x AS 630 MR 1 Mortise Lock (PASSAGE) L9010 OME/A 630 SC 1 Door Closer (Pull Side - DEL) 7500 DA 689 NO 1 Mop Plate (UL) K1050 F 4" 4BE CSK US32D RO 1 Armor Plate (UL) K1050 F 36" 4BE CSK US32D RO 1 Wall Stop 409 US32D RO 1 Gasketing S773D PE 1 Edge Guard EG308 x HDWE Prep x AS 630 MR































jessicalmartinez

Permit Number Batch



Set: 94.0 1 Continuous Hinge HG305 x AS 630 MR 1 Exit Device 9875L-BE-F 996L-BE-16 US32D VD (MORTISE-UL-PASSAGE) 1 Door Closer (Pull Side - DEL) 7500 DA 689 NO 1 Mop Plate (UL) K1050 F 4" 4BE CSK US32D RO 1 Armor Plate (UL) K1050 F 36" 4BE CSK US32D RO 1 Wall Stop 409 US32D RO 1 Gasketing S773D PE 1 Edge Guard EG308 x HDWE Prep x AS 630 MR Set: 95.0 1 Double Acting Hinge DSHP01C PE 1 Mortise Lock L9040 L583-363 OME/A L283-722 630 SC (PRIVACY W/IND x ADA T-TURN) 1 Concealed Overhead Stop 1-X36 630 RF 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Mop Plate (UL) K1050 F 4" 4BE CSK US32D RO 1 Emergency Stop ERS120CxHT PE 1 Gasketing S773D PE Set: 96.0 3 Hinge (heavy weight) T4A3786 US26D MK 1 Mortise Lock L9070 T OME/A L283-722 630 SC (CLASSROOM x IND) 1 Permanent Core 23-030 626 SC 1 Door Closer (Pull Side) 7500 689 NO 1 Wall Stop 409 US32D RO 1 Gasketing S773D PE 1 Gasketing ACP112BL/2 PE 1 Gasketing S44D PE 1 Door Bottom PDB411AE PE Set: 97.0 3 Hinge (heavy weight) T4A3786 US26D MK 1 Mortise Lock L9056 T L583-363 OME/A 630 SC (OFFC W/AUTO UNLOCK x ADA T-TURN) 1 Permanent Core 23-030 626 SC 1 Door Closer (Pull Side) 7500 689 NO 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Wall Stop 409 US32D RO 1 Electromagnetic Holder 998 TRI-VOLT x SPACER 689 RF EXTENTION AS REQUIRED FOR PROPER INSTALLATION 1 Gasketing S773D PE

































jessicalmartinez

Permit Number Batch



Set: 98.0 3 Hinge (heavy weight) T4A3786 US26D MK 1 Mortise Lock (PASSAGE) L9010 OME/A 630 SC 1 Wall Stop 409 US32D RO 1 Gasketing S773D PE Set: 98.1 3 Hinge (heavy weight) T4A3786 US26D MK 1 Mortise Lock (PASSAGE) L9010 OME/A 630 SC 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Mop Plate (UL) K1050 F 4" 4BE CSK US32D RO 1 Wall Stop 409 US32D RO 1 Gasketing S773D PE Set: 99.0 1 Continuous Hinge HG305 x AS 630 MR 1 Mortise Lock (PASSAGE) L9010 OME/A 630 SC 1 Surface Overhead Stop 10-X36 630 RF 1 Door Closer (Pull Side - DEL) 7500 DA 689 NO 1 Mop Plate (UL) K1050 F 4" 4BE CSK US32D RO 1 Armor Plate (UL) K1050 F 36" 4BE CSK US32D RO 1 Gasketing S773D PE 1 Edge Guard EG308 x HDWE Prep x AS 630 MR Set: 99.1 1 Continuous Hinge HG305 CTP x AS 630 MR 1 EM Mortise Lock (FSE-REX) L9092EUT OME/A RX 630 SC 1 Permanent Core 23-030 626 SC 1 Surface Overhead Stop 10-X36 630 RF 1 Door Closer (Pull Side - DEL) 7500 DA 689 NO 1 Mop Plate (UL) K1050 F 4" 4BE CSK US32D RO 1 Armor Plate (UL) K1050 F 36" 4BE CSK US32D RO 1 Gasketing S773D PE 1 Edge Guard EG308 x HDWE Prep x AS 630 MR 1 Wire Harness (THRU DOOR) CON-LENGTH AS REQUIRED VD 1 Wire Harness (POWER SUPPLY) CON-192 VD 1 Wire Harness (POWER SUPPLY EXTENSION) CON-6W VD 1 Electric Power Transfer EL-EPT TORX SU 1 Position Switch DPS-W/M-CAS SU 1 Card Reader SUPPLIED BY DIVISION 28 OT 1 Power Supply SUPPLIED BY DIVISION 28 OT Set: 100.0 3 Hinge TA2714 NRP US26D MK



































jessicalmartinez

Permit Number Batch



1 Mortise Lock (STOREROOM) L9080T OME/A 630 SC 1 Permanent Core 23-030 626 SC 1 Concealed Overhead Stop 1-X36 630 RF 3 Silencer 608 RO Set: 101.0 3 Hinge (heavy weight) T4A3786 NRP US26D MK 1 Mortise Lock L9056 T L583-363 OME/A 630 SC (OFFC W/AUTO UNLOCK x ADA T-TURN) 1 Permanent Core 23-030 626 SC 1 Concealed Overhead Stop 1-X36 630 RF 1 Door Closer (Pull Side) 7500 689 NO 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Gasketing S773D PE 1 Gasketing S44D PE 1 Door Bottom 411APKL/420APKL PE Set: 102.0 3 Hinge (heavy weight) T4A3786 US26D MK 1 Mortise Lock (CLASSROOM) L9070 T OME/A 630 SC 1 Permanent Core 23-030 626 SC 1 Door Closer (Pull Side) 7500 689 NO 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Wall Stop 409 US32D RO 1 Gasketing S773D PE 1 Gasketing S44D PE 1 Door Bottom 411APKL/420APKL PE Set: 103.0 3 Hinge (heavy weight) T4A3786 US26D MK 1 Mortise Lock L9070 T OME/A L283-722 630 SC (CLASSROOM x IND) 1 Permanent Core 23-030 626 SC 1 Concealed Overhead Stop 1-X36 630 RF 1 Gasketing S773D PE 1 Gasketing ACP112BL/2 PE 1 Gasketing S44D PE 1 Door Bottom PDB411AE PE Set: 104.0 3 Hinge (heavy weight) T4A3786 US26D MK 1 Mortise Lock (PASSAGE) L9010 OME/A 630 SC 1 Door Closer (Pull Side) 7500 689 NO 1 Wall Stop 409 US32D RO 1 Gasketing S773D PE




































jessicalmartinez

Permit Number Batch



1 Gasketing ACP112BL/2 PE 1 Gasketing S44D PE 1 Door Bottom PDB411AE PE Set: 105.0 1 Double Acting Hinge DSHP01C PE 1 EM Mortise Lock L9080T OME/A RX 630 SC (STOREROOM-REX) 1 Permanent Core 23-030 626 SC 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Mop Plate (UL) K1050 F 4" 4BE CSK US32D RO 1 Wall Stop 409 US32D RO 1 Emergency Stop ERS120CxHT PE 1 Gasketing S773D PE Set: 106.0 1 Continuous Hinge HG305 x AS 630 MR 1 Exit Device 9875L-BE-F 996L-BE-16 US32D VD (MORTISE-UL-PASSAGE) 1 Door Closer 7210MPDO SERIES 689 NO (PULL SIDE - SLIDE ARM & TRACK - ELEC-HO-FAIL SAFE) 1 Mop Plate (UL) K1050 F 4" 4BE CSK US32D RO 1 Armor Plate (UL) K1050 F 36" 4BE CSK US32D RO 1 Wall Stop 409 US32D RO 1 Gasketing S773D PE 1 Edge Guard EG308 x HDWE Prep x AS 630 MR 1 Push Button (KEYLESS SWITCH) PB4LA-2 SU Set: 107.0 1 Continuous Hinge HG305 x AS 630 MR 1 Exit Device 9875L-BE-F 996L-BE-16 US32D VD (MORTISE-UL-PASSAGE) 1 Surface Overhead Stop 10-X36 630 RF 1 Door Closer (Pull Side - DEL) 7500 DA 689 NO 1 Mop Plate (UL) K1050 F 4" 4BE CSK US32D RO 1 Armor Plate (UL) K1050 F 36" 4BE CSK US32D RO 1 Gasketing S773D PE 1 Edge Guard EG308 x HDWE Prep x AS 630 MR Set: 108.0 3 Hinge (heavy weight) T4A3786 US26D MK 1 Mortise Lock (STOREROOM) L9080T OME/A 630 SC 1 Permanent Core 23-030 626 SC 1 Door Closer (Pull Side) 7500 689 NO 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO


































jessicalmartinez

Permit Number Batch



1 Wall Stop 409 US32D RO 1 Gasketing S773D PE Set: 109.0 3 Hinge (heavy weight) T4A3786 US26D MK 1 Mortise Lock (PASSAGE) L9010 OME/A 630 SC 1 Door Closer (Pull Side w/Hold Open) 7500H 689 NO 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Mop Plate (UL) K1050 F 4" 4BE CSK US32D RO 1 Wall Stop 409 US32D RO 1 Gasketing S773D PE Set: 110.0 1 Continuous Hinge HG305 x AS 630 MR 1 Mortise Lock (STOREROOM) L9080T OME/A 630 SC 1 Permanent Core 23-030 626 SC 1 Surface Overhead Stop 10-X36 630 RF 1 Door Closer (Pull Side - DEL) 7500 DA 689 NO 1 Mop Plate (UL) K1050 F 4" 4BE CSK US32D RO 1 Armor Plate (UL) K1050 F 36" 4BE CSK US32D RO 1 Gasketing S773D PE 1 Edge Guard EG308 x HDWE Prep x AS 630 MR Set: 111.0 1 Continuous Hinge HG305 x AS 630 MR 1 Mortise Lock L9056 T L583-363 OME/A 630 SC (OFFC W/AUTO UNLOCK x ADA T-TURN) 1 Permanent Core 23-030 626 SC 1 Surface Overhead Stop 10-X36 630 RF 1 Door Closer (Pull Side - DEL) 7500 DA 689 NO 1 Mop Plate (UL) K1050 F 4" 4BE CSK US32D RO 1 Armor Plate (UL) K1050 F 36" 4BE CSK US32D RO 1 Gasketing S773D PE 1 Edge Guard EG308 x HDWE Prep x AS 630 MR Set: 112.0 1 Continuous Hinge HG305 x AS 630 MR 1 Mortise Lock (CLASSROOM) L9070 T OME/A 630 SC 1 Permanent Core 23-030 626 SC 1 Door Closer (Pull Side) 7500 689 NO 1 Mop Plate (UL) K1050 F 4" 4BE CSK US32D RO 1 Armor Plate (UL) K1050 F 36" 4BE CSK US32D RO 1 Wall Stop 409 US32D RO 1 Gasketing S773D PE 1 Edge Guard EG308 x HDWE Prep x AS 630 MR





































jessicalmartinez

Permit Number Batch



Set: 113.0 1 Continuous Hinge HG305 x AS 630 MR 1 Mortise Lock (PASSAGE) L9010 OME/A 630 SC 1 Door Closer PR7500H 689 NO (Push Side w/Hold Open) 1 Mop Plate (UL) K1050 F 4" 4BE CSK US32D RO 1 Armor Plate (UL) K1050 F 36" 4BE CSK US32D RO 1 Wall Stop 409 US32D RO 1 Gasketing S773D PE 1 Edge Guard EG308 x HDWE Prep x AS 630 MR Set: 114.0 3 Hinge (heavy weight) T4A3786 US26D MK 1 Mortise Lock L9496 T L583-363 OME/A L283-722 630 SC (PRIVACY x KEY x IND x ADA T-TURN) 1 Permanent Core 23-030 626 SC 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Wall Stop 409 US32D RO 1 Gasketing S773D PE 1 Gasketing ACP112BL/2 PE 1 Gasketing S44D PE 1 Door Bottom PDB411AE PE Set: 115.0 3 Hinge (heavy weight) T4A3786 US26D MK 1 Mortise Lock L9040 L583-363 OME/A L283-722 630 SC (PRIVACY W/IND x ADA T-TURN) 1 Mortise Lock L9496 T L583-363 OME/A L283-722 630 SC (PRIVACY x KEY x IND x ADA T-TURN) 1 Permanent Core 23-030 626 SC 1 Concealed Overhead Stop 1-X36 630 RF 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Gasketing S773D PE 1 Gasketing ACP112BL/2 PE 1 Gasketing S44D PE 1 Door Bottom PDB411AE PE Set: 116.0 3 Hinge (heavy weight) T4A3786 NRP US26D MK 1 Exit Device LD 9875L 996L-16 US32D VD (MORTISE-LD-CLASSROOM) 1 Permanent Core 23-030 626 SC 1 Cylinder (MORTISE) 20-061 ICX 626 SC 1 Door Closer (Push Side) PR7500 689 NO

































jessicalmartinez

Permit Number Batch



1 Wall Stop 409 US32D RO 1 Gasketing S773D PE Set: 117.0 3 Hinge (heavy weight) T4A3786 NRP US26D MK 1 Exit Device LD 9875L 996L-16 US32D VD (MORTISE-LD-CLASSROOM) 1 Permanent Core 23-030 626 SC 1 Cylinder (MORTISE) 20-061 ICX 626 SC 1 Concealed Overhead Stop 1-X36 630 RF 1 Door Closer (Push Side) PR7500 689 NO 1 Gasketing S773D PE Set: 118.0 3 Hinge (heavy weight) T4A3786 NRP US26D MK 1 Mortise Lock L9480 T L583-363 OME/A 630 SC (STOREROOM x DB x ADA T-TURN) 1 Permanent Core 23-030 626 SC 1 Door Closer (Push Side w/Stop Arm) CLP7500 689 NO 1 Gasketing S773D PE Set: 119.0 3 Hinge (heavy weight) T4A3786 US26D MK 1 Mortise Lock (CLASSROOM) L9070 T OME/A 630 SC 1 Permanent Core 23-030 626 SC 1 Door Closer 7210MPDO SERIES 689 NO (PULL SIDE - SLIDE ARM & TRACK - ELEC-HO-FAIL SAFE) 1 Gasketing S773D PE 1 Push Button (KEYLESS SWITCH) PB4LA-2 SU Set: 120.0 3 Hinge (heavy weight) T4A3786 NRP US26D MK 1 Mortise Lock (STOREROOM) L9080T OME/A 630 SC 1 Permanent Core 23-030 626 SC 1 Door Closer (Push Side) PR7500 689 NO 1 Wall Stop 409 US32D RO 1 Gasketing S773D PE Set: 121.0 1 Pivot Set 147 626 RF 3 Intermediate Pivot M19 626 RF 1 Push Bar RM3340 Mtg-Type 6HD US32D RO (COORDINATE CTC W/ARCHITECT) 1 Pull (GROOVE-STRAIGHT) RM3101 Mtg-Type 6HD MP US32D RO






























jessicalmartinez

Permit Number Batch



(COORDINATE LENGTH & CTC W/ARCHITECT) 1 Concealed Overhead Stop 1-X36 630 RF 1 Door Closer (Push Side TJ) J7500 689 NO 1 Threshold 272A MSES25SS PE (VERIFY FLOOR CONDITION) 1 Weatherstrip and Door Bottom System SUPPLIED BY DOOR MFG/SUPPLIER OT Set: 121.0 CD-026 1 Push Bar RM3340 Mtg-Type 6HD US32D RO (COORDINATE CTC W/ARCHITECT) 1 Pull (GROOVE-STRAIGHT) RM3101 Mtg-Type 6HD MP US32D RO (COORDINATE LENGTH & CTC W/ARCHITECT) 1 Threshold 272A MSES25SS PE (VERIFY FLOOR CONDITION) 1 Balance of Hardware SUPPLIED BY DOOR MFG/SUPPLIER OT Set: 122.0 3 Hinge (heavy weight) T4A3786 US26D MK 1 Mortise Lock (PASSAGE) L9010 OME/A 630 SC 1 Surface Overhead Stop 10-X36 630 RF 1 Door Closer (Pull Side) 7500 689 NO 1 Gasketing S773D PE Set: 123.0 3 Hinge (heavy weight) T4A3786 US26D MK 1 Mortise Lock (PASSAGE) L9010 OME/A 630 SC 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Mop Plate (UL) K1050 F 4" 4BE CSK US32D RO 1 Wall Stop 409 US32D RO 1 Gasketing S773D PE Set: 124.0 1 Continuous Hinge HG305 x AS 630 MR 1 Mortise Lock (PASSAGE) L9010 OME/A 630 SC 1 Concealed Overhead Stop 1-X36 630 RF 1 Mop Plate (UL) K1050 F 4" 4BE CSK US32D RO 1 Armor Plate (UL) K1050 F 36" 4BE CSK US32D RO 1 Gasketing S773D PE 1 Edge Guard EG308 x HDWE Prep x AS 630 MR Set: 125.0 3 Hinge (heavy weight) T4A3786 US26D MK 1 Mortise Lock (PASSAGE) L9010 OME/A 630 SC 1 Concealed Overhead Stop 1-X36 630 RF



























jessicalmartinez

Permit Number Batch



1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Mop Plate (UL) K1050 F 4" 4BE CSK US32D RO 1 Gasketing S88D PE 1 Sweep 315CN PE Set: 126.0 1 Continuous Hinge HG305 x AS 630 MR 1 Mortise Lock L9056 T L583-363 OME/A 630 SC (OFFC W/AUTO UNLOCK x ADA T-TURN) 1 Permanent Core 23-030 626 SC 1 Concealed Overhead Stop 1-X36 630 RF 1 Mop Plate (UL) K1050 F 4" 4BE CSK US32D RO 1 Armor Plate (UL) K1050 F 36" 4BE CSK US32D RO 1 Gasketing S773D PE 1 Edge Guard EG308 x HDWE Prep x AS 630 MR Set: 127.0 6 Hinge TA2714 NRP US26D MK 2 Flush Bolt 555 US26D RO 1 Dust Proof Strike 570 US26D RO 1 Mortise Lock (STOREROOM) L9080T OME/A 630 SC 1 Permanent Core 23-030 626 SC 1 Concealed Overhead Stop 1-X36 630 RF 1 Door Closer (Push Side w/Stop Arm) CLP7500 689 NO 1 Gasketing S44D PE 1 Astragal S772D PE Set: 128.0 3 Hinge (heavy weight) T4A3786 US26D MK 1 Mortise Lock (PASSAGE) L9010 OME/A 630 SC 1 Concealed Overhead Stop 1-X36 630 RF 1 Door Closer (Push Side) PR7500 689 NO 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Gasketing S773D PE 1 Edge Guard EG308 x HDWE Prep x AS 630 MR Set: 129.0 1 Continuous Hinge HG305 x AS 630 MR 1 Mortise Lock L9056 T L583-363 OME/A 630 SC (OFFC W/AUTO UNLOCK x ADA T-TURN) 1 Permanent Core 23-030 626 SC 1 Surface Overhead Stop 10-X36 630 RF 1 Door Closer (Pull Side) 7500 689 NO 1 Mop Plate (UL) K1050 F 4" 4BE CSK US32D RO 1 Armor Plate (UL) K1050 F 36" 4BE CSK US32D RO




































jessicalmartinez

Permit Number Batch



1 Gasketing S773D PE 1 Edge Guard EG308 x HDWE Prep x AS 630 MR Set: 130.0 1 Continuous Hinge HG305 x AS 630 MR 1 Mortise Lock L9056 T L583-363 OME/A 630 SC (OFFC W/AUTO UNLOCK x ADA T-TURN) 1 Permanent Core 23-030 626 SC 1 Door Closer (Pull Side) 7500 689 NO 1 Mop Plate (UL) K1050 F 4" 4BE CSK US32D RO 1 Armor Plate (UL) K1050 F 36" 4BE CSK US32D RO 1 Wall Stop 409 US32D RO 1 Gasketing S773D PE 1 Edge Guard EG308 x HDWE Prep x AS 630 MR Set: 131.0 2 Continuous Hinge HG305 x AS 630 MR 1 Dust Proof Strike 570 US26D RO 1 Flush Bolt 2842/2942 US32D RO 1 Mortise Lock (PASSAGE) L9010 OME/A 630 SC 1 Coordinator 2600 SERIES x WEAR PLATES US28 RO 2 Mounting Bracket 2601AB/C US28 RO 2 Surface Overhead Stop 10-X36 630 RF 2 Door Closer (Pull Side - DEL) 7500 DA 689 NO 2 Mop Plate (UL) K1050 F 4" 4BE CSK US32D RO 2 Armor Plate (UL) K1050 F 36" 4BE CSK US32D RO 1 Gasketing S773D PE 1 Astragal S772D PE 2 Edge Guard EG308 x HDWE Prep x AS 630 MR Set: 132.0 3 Hinge (heavy weight) T4A3786 US26D MK 1 Mortise Lock (PASSAGE) L9010 OME/A 630 SC 1 Surface Overhead Stop 10-X36 630 RF 1 Door Closer (Pull Side) 7500 689 NO 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Mop Plate (UL) K1050 F 4" 4BE CSK US32D RO 1 Gasketing S773D PE Set: 133.0 3 Hinge (heavy weight) T4A3786 NRP US26D MK 1 Mortise Lock (STOREROOM) L9080T OME/A 630 SC 1 Permanent Core 23-030 626 SC 1 Door Closer (Push Side w/Stop Arm) CLP7500 689 NO





































jessicalmartinez

Permit Number Batch



1 Gasketing S773D PE Set: 134.0 3 Hinge (heavy weight) T4A3786 US26D MK 1 Mortise Lock (PASSAGE) L9010 OME/A 630 SC 1 Door Closer (Pull Side - DEL) 7500 DA 689 NO 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Wall Stop 409 US32D RO 1 Gasketing S773D PE Set: 135.0 1 Continuous Hinge HG305 x AS 630 MR 1 Mortise Lock (CLASSROOM) L9070 T OME/A 630 SC 1 Permanent Core 23-030 626 SC 1 Surface Overhead Stop 10-X36 630 RF 1 Door Closer (Pull Side - DEL) 7500 DA 689 NO 1 Mop Plate (UL) K1050 F 4" 4BE CSK US32D RO 1 Armor Plate (UL) K1050 F 36" 4BE CSK US32D RO 1 Wall Stop 409 US32D RO 1 Gasketing S773D PE 1 Edge Guard EG308 x HDWE Prep x AS 630 MR Set: 136.0 1 Cylindrical Lock (storeroom) ND80 T OME 626 SC 1 Permanent Core 23-030 626 SC 1 Balance of Hardware SUPPLIED BY DOOR MFG/SUPPLIER OT 1 Weldable Gate Box K-BXRHO (COORDINATE MATERIAL W/GATE MFG) OT 1 Lever Guard SUPPLIED BY DOOR MFG/SUPPLIER OT Set: 137.0 1 Continuous Hinge HG305 x AS 630 MR 1 Mortise Lock (CLASSROOM) L9070 T OME/A 630 SC 1 Permanent Core 23-030 626 SC 1 Door Closer (Push Side w/Hold Open) PR7500H 689 NO 1 Mop Plate (UL) K1050 F 4" 4BE CSK US32D RO 1 Armor Plate (UL) K1050 F 36" 4BE CSK US32D RO 1 Wall Stop 409 US32D RO 1 Gasketing S773D PE 1 Edge Guard EG308 x HDWE Prep x AS 630 MR Set: 138.0 1 Continuous Hinge HG305 x AS 630 MR 1 Mortise Lock (CLASSROOM) L9070 T OME/A 630 SC 1 Permanent Core 23-030 626 SC
































jessicalmartinez

Permit Number Batch



1 Concealed Overhead Stop 1-X36 630 RF 1 Door Closer PR7500 DA 689 NO 1 Mop Plate (UL) K1050 F 4" 4BE CSK US32D RO 1 Armor Plate (UL) K1050 F 36" 4BE CSK US32D RO 1 Wall Stop 409 US32D RO 1 Gasketing S773D PE 1 Edge Guard EG308 x HDWE Prep x AS 630 MR Set: 139.0 1 Continuous Hinge HG305 x AS 630 MR 1 Mortise Lock (STOREROOM) L9080T OME/A 630 SC 1 Permanent Core 23-030 626 SC 1 Door Closer 7220/7230 MPDO SERIES 689 NO (PUSH SIDE - DBL LEVER ARM - ELEC-HO-FAIL SAFE) 1 Armor Plate (UL) K1050 F 36" 4BE CSK US32D RO 1 Gasketing S773D PE 1 Edge Guard EG308 x HDWE Prep x AS 630 MR Set: 140.0 1 Continuous Hinge HG305 x AS 630 MR 1 Mortise Lock (CLASSROOM) L9070 T OME/A 630 SC 1 Permanent Core 23-030 626 SC 1 Door Closer (Pull Side w/Hold Open) 7500H 689 NO 1 Mop Plate (UL) K1050 F 4" 4BE CSK US32D RO 1 Armor Plate (UL) K1050 F 36" 4BE CSK US32D RO 1 Gasketing S773D PE 1 Edge Guard EG308 x HDWE Prep x AS 630 MR Set: 141.0 3 Hinge (heavy weight) T4A3386 NRP US32D MK 1 Mortise Lock (CLASSROOM) L9070 T OME/A 630 SC 1 Permanent Core 23-030 626 SC 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Wall Stop 409 US32D RO 1 Gasketing S773D PE Set: 142.0 3 Hinge (heavy weight) T4A3386 NRP US32D MK 1 Mortise Lock (CLASSROOM) L9070 T OME/A 630 SC 1 Permanent Core 23-030 626 SC 1 Concealed Overhead Stop 1-X36 630 RF 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Gasketing S773D PE



































jessicalmartinez

Permit Number Batch



Set: 143.0 3 Hinge (heavy weight) T4A3386 US32D MK 1 Mortise Lock (CLASSROOM) L9070 T OME/A 630 SC 1 Permanent Core 23-030 626 SC 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Wall Stop 409 US32D RO 1 Gasketing S773D PE Set: 144.0 1 Continuous Hinge HG305 x AS 630 MR 1 Mortise Lock (CLASSROOM) L9070 T OME/A 630 SC 1 Permanent Core 23-030 626 SC 1 Surface Overhead Stop 10-X36 630 RF 1 Door Closer (Pull Side) 7500 689 NO 1 Mop Plate (UL) K1050 F 4" 4BE CSK US32D RO 1 Armor Plate (UL) K1050 F 36" 4BE CSK US32D RO 1 Threshold 276A MSES25SS PE (VERIFY FLOOR CONDITION) 1 Gasketing S88D PE 1 Sweep 315CN PE 1 Edge Guard EG308 x HDWE Prep x AS 630 MR Set: 145.0 2 Continuous Hinge HG305 x AS 630 MR 1 Flush Bolt 555 US26D RO 1 Dust Proof Strike 570 US26D RO 1 Mortise Lock (CLASSROOM) L9070 T OME/A 630 SC 1 Permanent Core 23-030 626 SC 2 Conc Overhead Hold Open 1ADJ-X26 630 RF 2 Mop Plate (UL) K1050 F 4" 4BE CSK US32D RO 2 Armor Plate (UL) K1050 F 36" 4BE CSK US32D RO 1 Gasketing S773D PE 1 Astragal S772D PE 2 Edge Guard EG308 x HDWE Prep x AS 630 MR Set: 146.0 1 Continuous Hinge HG305 x AS 630 MR 1 Mortise Lock (PASSAGE) L9010 OME/A 630 SC 2 Armor Plate (UL) K1050 F 36" 4BE CSK US32D RO 1 Wall Stop 409 US32D RO 1 Gasketing S773D PE 1 Edge Guard EG308 x HDWE Prep x AS 630 MR



































jessicalmartinez

Permit Number Batch



Set: 147.0 6 Hinge TA2714 NRP US26D MK 2 Flush Bolt 555 US26D RO 1 Dust Proof Strike 570 US26D RO 1 Mortise Lock (STOREROOM) L9080T OME/A 630 SC 1 Permanent Core 23-030 626 SC 1 Concealed Overhead Stop 1-X36 630 RF 1 Door Closer (Push Side) PR7500 689 NO 1 Wall Stop 409 US32D RO 1 Gasketing S44D PE 1 Astragal S772D PE Set: 148.0 1 Continuous Hinge HG305 x AS 630 MR 1 Mortise Lock (PASSAGE) L9010 OME/A 630 SC 1 Concealed Overhead Stop 1-X36 630 RF 1 Door Closer (Push Side w/Hold Open) PR7500H 689 NO 2 Armor Plate (UL) K1050 F 36" 4BE CSK US32D RO 1 Gasketing S773D PE 1 Edge Guard EG308 x HDWE Prep x AS 630 MR Set: 149.0 2 Continuous Hinge HG305 x AS 630 MR 1 Flush Bolt 555 US26D RO 1 Dust Proof Strike 570 US26D RO 1 Mortise Lock (PASSAGE) L9010 OME/A 630 SC 2 Concealed Overhead Stop 1-X36 630 RF 1 Door Closer (Push Side w/Hold Open) PR7500H 689 NO 2 Armor Plate (UL) K1050 F 36" 4BE CSK US32D RO 1 Gasketing S773D PE 1 Astragal S772D PE 2 Edge Guard EG308 x HDWE Prep x AS 630 MR Set: 150.0 2 Continuous Hinge HG305 x AS 630 MR 1 Flush Bolt 555 US26D RO 1 Dust Proof Strike 570 US26D RO 1 Mortise Lock (STOREROOM) L9080T OME/A 630 SC 1 Permanent Core 23-030 626 SC 2 Concealed Overhead Stop 1-X36 630 RF 2 Door Closer (Pull Side) 7500 689 NO 2 Armor Plate (UL) K1050 F 36" 4BE CSK US32D RO 1 Gasketing S773D PE 1 Astragal S772D PE 2 Edge Guard EG308 x HDWE Prep x AS 630 MR







































jessicalmartinez

Permit Number Batch



Set: 151.0 2 Continuous Hinge FM300 630 MR 1 Dust Proof Strike 570 US26D RO 1 Flush Bolt 2842/2942 US32D RO 1 Mortise Lock (PASSAGE) L9010 OME/A 630 SC 1 Coordinator 2600 SERIES x WEAR PLATES US28 RO 1 Door Closer 7210MPDO SERIES 689 NO (PULL SIDE - SLIDE ARM & TRACK - ELEC-HO-FAIL SAFE) 1 Door Closer 7210MPSO SERIES SLAVE UNIT 689 NO (PULL SIDE - SLIDE ARM & TRACK - ELEC-HO FAIL SAFE) 1 Gasketing S773D PE 1 Astragal S772D PE Set: 151.1 Doors: 6.900.1, 7.900.1, 8.900.1 2 Continuous Hinge FM300 630 MR 2 Push Bar RM3340 Mtg-Type 6HD US32D RO (COORDINATE LENGTH & CTC W/ARCHITECT) 2 Pull RM3101 Mtg-Type 6HD MP US32D RO (GROOVE-STRAIGHT) (COORDINATE LENGTH & CTC W/ARCHITECT) 1 Automatic Opener 9550 Series as required ANCLR LC 1 Gasketing by Door Manufacture PE 1 Astragal by Door manufacture PE 1 Position Switch DPS-W/M-CAS SU 2 Touchless Actuator 8310-813 LC 1 Safety Sensor Package Simultaneous Pair 8310-3891 LC Notes: Doors normally closed with free egress at all times. Wave sensor will trigger auto opening. Set: 152.0

Doors: 4.900.1, 5.900.1

2 Continuous Hinge FM300 630 MR 2 Push Bar RM3340 Mtg-Type 6HD US32D RO (COORDINATE LENGTH & CTC W/ARCHITECT) 2 Pull RM3101 Mtg-Type 6HD MP US32D RO (GROOVE-STRAIGHT) (COORDINATE LENGTH & CTC W/ARCHITECT) 2 Magnetic Lock M62B SU 1 Automatic Opener 9550 Series as required ANCLR LC

1 Gasketing by Door manufacture PE

1 Astragal by Door manufacture PE 1 Position Switch DPS-W/M-CAS SU 1 Card Reader SUPPLIED BY DIVISION 28 OT 1 Touchless Actuator 8310-813 LC
























jessicalmartinez

Permit Number Batch



1 Safety Sensor Package Simultaneous Pair 8310-3891 LC 1 Power Supply By Security 1 Battery Backup By Security Notes: Doors normally closed and locked with free egress at all times. Valid card read will momentarily unlatch doors and trigger auto opening. Wave sensor on inside will momentarily unlatch doors and trigger auto opening. Door fail safe with loss of power. Note: Place remote release button at nurse’s station. Set: 153.0 3 Hinge (heavy weight) T4A3786 US26D MK 1 EM Mortise Lock (FSE-REX) L9092EUT OME/A RX 630 SC 1 Permanent Core 23-030 626 SC 1 Surface Overhead Stop 10-X36 630 RF 1 Door Closer (Pull Side) 7500 689 NO 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Mop Plate (UL) K1050 F 4" 4BE CSK US32D RO 1 Gasketing S773D PE 1 Electric Power Transfer EL-EPT SU 1 Wire Harness (THRU DOOR) CON-LENGTH AS REQUIRED VD 1 Wire Harness (POWER SUPPLY) CON-192 VD 1 Wire Harness (POWER SUPPLY EXTENSION) CON-6W VD 1 Position Switch DPS-W/M-CAS SU 1 Card Reader SUPPLIED BY DIVISION 28 OT 1 Power Supply SUPPLIED BY DIVISION 28 OT Set: 154.0 3 Hinge (heavy weight) T4A3786 US26D MK 1 EM Mortise Lock (FSE-REX) L9092EUT OME/A RX 630 SC 1 Permanent Core 23-030 626 SC 1 Door Closer (Pull Side) 7500 689 NO 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Mop Plate (UL) K1050 F 4" 4BE CSK US32D RO 1 Wall Stop 409 US32D RO 1 Gasketing S773D PE 1 Electric Power Transfer EL-EPT SU 1 Wire Harness (THRU DOOR) CON-LENGTH AS REQUIRED VD 1 Wire Harness (POWER SUPPLY) CON-192 VD 1 Wire Harness (POWER SUPPLY EXTENSION) CON-6W VD 1 Position Switch DPS-W/M-CAS SU 1 Card Reader SUPPLIED BY DIVISION 28 OT 1 Power Supply SUPPLIED BY DIVISION 28 OT Set: 155.0 3 Hinge (heavy weight) T4A3786 US26D MK































jessicalmartinez

Permit Number Batch



1 EM Mortise Lock (FSE-REX) L9092EUT OME/A RX 630 SC 1 Permanent Core 23-030 626 SC 1 Door Closer (Pull Side - DEL) 7500 DA 689 NO 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Wall Stop 409 US32D RO 1 Gasketing S773D PE 1 Electric Power Transfer EL-EPT SU 1 Wire Harness (THRU DOOR) CON-LENGTH AS REQUIRED VD 1 Wire Harness (POWER SUPPLY) CON-192 VD 1 Wire Harness (POWER SUPPLY EXTENSION) CON-6W VD 1 Position Switch DPS-W/M-CAS SU 1 Card Reader SUPPLIED BY DIVISION 28 OT 1 Power Supply SUPPLIED BY DIVISION 28 OT Set: 156.0 3 Hinge (heavy weight) T4A3786 US26D MK 1 EM Mortise Lock (FSE-REX) L9092EUT OME/A RX 630 SC 1 Permanent Core 23-030 626 SC 1 Surface Overhead Stop 10-X36 630 RF 1 Door Closer (Pull Side - DEL) 7500 DA 689 NO 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Gasketing S773D PE 1 Electric Power Transfer EL-EPT SU 1 Wire Harness (THRU DOOR) CON-LENGTH AS REQUIRED VD 1 Wire Harness (POWER SUPPLY) CON-192 VD 1 Wire Harness (POWER SUPPLY EXTENSION) CON-6W VD 1 Position Switch DPS-W/M-CAS SU 1 Card Reader SUPPLIED BY DIVISION 28 OT 1 Power Supply SUPPLIED BY DIVISION 28 OT Set: 157.0 3 Hinge (heavy weight) T4A3786 US26D MK 1 EM Mortise Lock (STOREROOM-REX) L9080T OME/A RX 630 SC 1 Permanent Core 23-030 626 SC 1 Electric Strike (FSE) 1006CS 630 HS 1 Automatic Opener (PULL SIDE) 9531 HL/D STD ANCLR LC 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Wall Stop 409 US32D RO 1 Gasketing S773D PE 1 Electric Power Transfer EL-EPT SU 1 Wire Harness (THRU DOOR) CON-LENGTH AS REQUIRED VD 2 Wire Harness (POWER SUPPLY) CON-192 VD 2 Wire Harness (POWER SUPPLY EXTENSION) CON-6W VD 1 Position Switch DPS-W/M-CAS SU 1 Card Reader SUPPLIED BY DIVISION 28 OT 1 Touchless Actuator 8310-813 LC 1 Power Supply SUPPLIED BY DIVISION 28 OT









































jessicalmartinez

Permit Number Batch



Set: 158.0 3 Hinge (heavy weight) T4A3786 US26D MK 1 EM Mortise Lock (STOREROOM-REX) L9080T OME/A RX 630 SC 1 Permanent Core 23-030 626 SC 1 Electric Strike (FSE) 1006CS 630 HS 1 Door Closer (Pull Side - DEL) 7500 DA 689 NO 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Wall Stop 409 US32D RO 1 Gasketing S773D PE 1 Electric Power Transfer EL-EPT SU 1 Wire Harness (THRU DOOR) CON-LENGTH AS REQUIRED VD 2 Wire Harness (POWER SUPPLY) CON-192 VD 2 Wire Harness (POWER SUPPLY EXTENSION) CON-6W VD 1 Position Switch DPS-W/M-CAS SU 1 Card Reader SUPPLIED BY DIVISION 28 OT 1 Power Supply SUPPLIED BY DIVISION 28 OT Set: 159.0 3 Hinge (heavy weight) T4A3786 US26D MK 1 EM Mortise Lock (FSE-REX) L9092EUT OME/A RX 630 SC 1 Permanent Core 23-030 626 SC 1 Door Closer (Pull Side) 7500 689 NO 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Mop Plate (UL) K1050 F 4" 4BE CSK US32D RO 1 Wall Stop 409 US32D RO 1 Gasketing S773D PE 1 Electric Power Transfer EL-EPT SU 1 Wire Harness (THRU DOOR) CON-LENGTH AS REQUIRED VD 1 Wire Harness (POWER SUPPLY) CON-192 VD 1 Wire Harness (POWER SUPPLY EXTENSION) CON-6W VD 1 Position Switch DPS-W/M-CAS SU 1 Card Reader SUPPLIED BY DIVISION 28 OT 1 Power Supply SUPPLIED BY DIVISION 28 OT Set: 160.0 3 Hinge (heavy weight) T4A3786 US26D MK 1 EM Mortise Lock (FSE-REX) L9092EUT OME/A RX 630 SC 1 Permanent Core 23-030 626 SC 1 Surface Overhead Stop 10-X36 630 RF 1 Door Closer (Pull Side) 7500 689 NO 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Mop Plate (UL) K1050 F 4" 4BE CSK US32D RO 1 Gasketing S773D PE 1 Electric Power Transfer EL-EPT SU 1 Wire Harness (THRU DOOR) CON-LENGTH AS REQUIRED VD







































jessicalmartinez

Permit Number Batch



1 Wire Harness (POWER SUPPLY) CON-192 VD 1 Wire Harness (POWER SUPPLY EXTENSION) CON-6W VD 1 Position Switch DPS-W/M-CAS SU 1 Card Reader SUPPLIED BY DIVISION 28 OT 1 Power Supply SUPPLIED BY DIVISION 28 OT Set: 161.0 3 Hinge (heavy weight) T4A3786 US26D MK 1 EM Mortise Lock (FSE-REX) L9092EUT OME/A RX 630 SC 1 Permanent Core 23-030 626 SC 1 Surface Overhead Stop 10-X36 630 RF 1 Door Closer (Pull Side) 7500 689 NO 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Gasketing S773D PE 1 Door Bottom 411APKL/420APKL PE 1 Electric Power Transfer EL-EPT SU 1 Wire Harness (THRU DOOR) CON-LENGTH AS REQUIRED VD 1 Wire Harness (POWER SUPPLY) CON-192 VD 1 Wire Harness (POWER SUPPLY EXTENSION) CON-6W VD 1 Position Switch DPS-W/M-CAS SU 1 Card Reader SUPPLIED BY DIVISION 28 OT 1 Power Supply SUPPLIED BY DIVISION 28 OT Notes: Door bottom at door G.200 Set: 162.0 2 Continuous Hinge HG305 CTP x AS 630 MR 1 Exit Device RX QEL 9847/9847WDC-EO-F LBR CON US32D VD (CVR-UL-QEL-REX-FSE) 1 EM Exit Device QEL 9847/9847WDC-EO-F LBR CON US32D VD (CVR-UL-QEL-FSE-NO REX) 1 Automatic Opener 9560 HL/D DOUBLE EGRESS ANCLR LC (DOUBLE EGRESS) 2 Armor Plate (UL) K1050 F 36" 4BE CSK US32D RO 2 Wall Stop 409 US32D RO 1 Gasketing S773D PE 1 Astragal S772D PE 1 Edge Guard EG308 x HDWE Prep x AS 630 MR 2 Electric Power Transfer EL-EPT SU 2 Wire Harness (THRU RAIL) CON-6 VD 2 Wire Harness (POWER SUPPLY) CON-192 VD 2 Wire Harness (POWER SUPPLY EXTENSION) CON-6W VD 2 Position Switch DPS-W/M-CAS SU 1 Card Reader SUPPLIED BY DIVISION 28 OT 1 Touchless Actuator 8310-813 LC 1 Power Supply PS914 900-4RL-FA VD



































jessicalmartinez

Permit Number Batch



Set: 163.0 2 Continuous Hinge FM300 CTP 630 MR 2 Fire Rated Conc Vert Rod 9847WDC-EO-F LBR US32D VD 2 Door Closer LCN 4040XP Rw/PA AL LC 2 Wall Stop 409 US32D RO 1 Gasketing S773D PE 1 Astragal S772D PE Set: 164.0 3 Hinge (heavy weight) T4A3786 US26D MK 1 EM Mortise Lock (FSE-REX) L9092EUT OME/A RX 630 SC 1 Permanent Core 23-030 626 SC 1 Door Closer (Pull Side) 7500 689 NO 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Wall Stop 409 US32D RO 1 Gasketing S773D PE 1 Door Bottom 411APKL/420APKL PE 1 Electric Power Transfer EL-EPT SU 1 Wire Harness (THRU DOOR) CON-LENGTH AS REQUIRED VD 1 Wire Harness (POWER SUPPLY) CON-192 VD 1 Wire Harness (POWER SUPPLY EXTENSION) CON-6W VD 1 Position Switch DPS-W/M-CAS SU 1 Card Reader SUPPLIED BY DIVISION 28 OT 1 Power Supply SUPPLIED BY DIVISION 28 OT Notes: Door bottom at door 1.C21.2, 1.205 Set: 165.0 3 Hinge (heavy weight) T4A3786 US26D MK 1 EM Mortise Lock (FSE-REX) L9092EUT OME/A RX 630 SC 1 Permanent Core 23-030 626 SC 1 Door Closer (Pull Side) 7500 689 NO 1 Wall Stop 409 US32D RO 1 Gasketing S773D PE 1 Electric Power Transfer EL-EPT SU 1 Wire Harness (THRU DOOR) CON-LENGTH AS REQUIRED VD 1 Wire Harness (POWER SUPPLY) CON-192 VD 1 Wire Harness (POWER SUPPLY EXTENSION) CON-6W VD 1 Position Switch DPS-W/M-CAS SU 1 Card Reader SUPPLIED BY DIVISION 28 OT 1 Power Supply SUPPLIED BY DIVISION 28 OT Set: 166.0 1 Continuous Hinge HG305 CTP x AS 630 MR 1 EM Mortise Lock (STOREROOM-REX) L9080T OME/A RX 630 SC


































jessicalmartinez

Permit Number Batch



1 Permanent Core 23-030 626 SC 1 Electric Strike (FSE) 1006CS 630 HS 1 Surface Overhead Stop 10-X36 630 RF 1 Automatic Opener (PULL SIDE) 9531 HL/D STD ANCLR LC 1 Mop Plate (UL) K1050 F 4" 4BE CSK US32D RO 1 Armor Plate (UL) K1050 F 36" 4BE CSK US32D RO 1 Gasketing S773D PE 1 Edge Guard EG308 x HDWE Prep x AS 630 MR 1 Electric Power Transfer EL-EPT SU 1 Wire Harness (THRU DOOR) CON-LENGTH AS REQUIRED VD 2 Wire Harness (POWER SUPPLY) CON-192 VD 2 Wire Harness (POWER SUPPLY EXTENSION) CON-6W VD 1 Position Switch DPS-W/M-CAS SU 1 Card Reader SUPPLIED BY DIVISION 28 OT 1 Touchless Actuator 8310-813 LC 1 Power Supply SUPPLIED BY DIVISION 28 OT Set: 167.0 2 Continuous Hinge FM300 630 MR 2 Exit Device (CVR-UL) 9847/9847WDC-EO-F LBR US32D VD 2 Door Closer (Push Side) PR7500 689 NO 2 Electromagnetic Holder 998 TRI-VOLT x SPACER 689 RF EXTENTION AS REQUIRED FOR PROPER INSTALLATION 1 Gasketing S773D PE 1 Astragal S772D PE Set: 168.0 2 Continuous Hinge FM300 630 MR 2 Exit Device (CVR-UL-PASSAGE) 9847/9847WDC-L-BE-F 996L-BE-16 LBR US32D VD 2 Door Closer (Pull Side) 7500 689 NO 2 Wall Stop 409 US32D RO 2 Electromagnetic Holder 998 TRI-VOLT x SPACER 689 RF EXTENTION AS REQUIRED FOR PROPER INSTALLATION 1 Gasketing S773D PE 1 Astragal S772D PE Set: 169.0 2 Continuous Hinge HG305 CTP x AS 630 MR 2 EM Exit Device QEL 9847/9847WDC-EO-F LBR CON US32D VD (CVR-UL-QEL-FSE-NO REX) 1 Automatic Opener 9560 HL/D DOUBLE EGRESS ANCLR LC (DOUBLE EGRESS) 2 Armor Plate (UL) K1050 F 36" 4BE CSK US32D RO 2 Wall Stop 409 US32D RO 1 Gasketing S773D PE 1 Astragal S772D PE




































jessicalmartinez

Permit Number Batch



2 Edge Guard EG308 x HDWE Prep x AS 630 MR 2 Electric Power Transfer EL-EPT SU 2 Wire Harness (THRU RAIL) CON-6 VD 2 Wire Harness (POWER SUPPLY) CON-192 VD 2 Wire Harness (POWER SUPPLY EXTENSION) CON-6W VD 2 Touchless Actuator 8310-813 LC 1 Power Supply PS914 900-4RL-FA VD Set: 170.0 2 Continuous Hinge HG305 CTP x AS 630 MR 2 EM Exit Device RX QEL 9847/9847WDC-L-E996L US32D VD (CVR-UL-QEL-FSE-REX) -16 FSE LBR CON 2 Cylinder (RIM) 20-057 ICX 626 SC 2 Permanent Core 23-030 626 SC 1 Automatic Opener (PUSH SIDE) 9553 HL/D LONG2 ANCLR LC 2 Armor Plate (UL) K1050 F 36" 4BE CSK US32D RO 2 Wall Stop 409 US32D RO 1 Gasketing S773D PE 1 Astragal S772D PE 2 Edge Guard EG308 x HDWE Prep x AS 630 MR 2 Electric Power Transfer EL-EPT SU 2 Wire Harness (THRU RAIL) CON-6 VD 2 Wire Harness (POWER SUPPLY) CON-192 VD 2 Wire Harness (POWER SUPPLY EXTENSION) CON-6W VD 2 Position Switch DPS-W/M-CAS SU 1 Card Reader SUPPLIED BY DIVISION 28 OT 1 Touchless Actuator 8310-813 LC 1 Safety Sensor Package Simultaneous Pair 8310-3891 LC 1 Power Supply PS914 900-4RL-FA VD Set: 171.0 2 Continuous Hinge FM300 630 MR 2 Exit Device 9847/9847WDC-L-BE-F 996L-BE US32D VD (CVR-UL-PASSAGE) -16 LBR 2 Door Closer (Push Side) PR7500 689 NO 2 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 2 Wall Stop 409 US32D RO 1 Gasketing S773D PE 1 Astragal S772D PE Set: 172.0 1 Continuous Hinge FM300 630 MR 1 Exit Device 9875L-BE-F 996L-BE-16 US32D VD (MORTISE-UL-PASSAGE) 1 Door Closer (Pull Side) 7500 689 NO 1 Wall Stop 409 US32D RO





































jessicalmartinez

Permit Number Batch



1 Electromagnetic Holder 998 TRI-VOLT x SPACER 689 RF EXTENTION AS REQUIRED FOR PROPER INSTALLATION 1 Gasketing S773D PE Set: 173.0 3 Hinge (heavy weight) T4A3786 US26D MK 1 Exit Device 9875L-BE-F 996L-BE-16 US32D VD (MORTISE-UL-PASSAGE) 1 Concealed Overhead Stop 1-X36 630 RF 1 Door Closer (Push Side) PR7500 689 NO 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Threshold 276A MSES25SS PE (VERIFY FLOOR CONDITION) 1 Gasketing S88D PE 1 Sweep 315CN PE Set: 174.0 1 Pivot Set (CENTER HUNG) 370 626 RF 1 Mortise Lock L9480 T L583-363 OME/A 630 SC (STOREROOM x DB x ADA T-TURN) 1 Permanent Core 23-030 626 SC 1 Concealed Overhead Stop 1-X36 630 RF 1 Gasketing S773D PE Set: 175.0 6 Hinge (heavy weight) T4A3786 NRP US26D MK 1 Dust Proof Strike 570 US26D RO 1 Flush Bolt 2842/2942 US32D RO 1 Mortise Deadlock L462 626 SC 2 Pull (GROOVE-OFFSET) RM3131 Mtg-Type 6HD MP US32D RO 2 Push Bar RM3340 Mtg-Type 6HD US32D RO (COORDINATE CTC W/ARCHITECT) 2 Door Closer (Push Side w/Hold Open) PR7500H 689 NO 2 Wall Stop 409 US32D RO 1 Gasketing S773D PE 1 Astragal S772D PE Notes: SIGNAGE - SUPPLIED BY OTHERS Set: 176.0 3 Hinge (heavy weight) T4A3786 US26D MK 1 EM Mortise Lock (FSE-REX) L9092EUT OME/A RX 630 SC 1 Permanent Core 23-030 626 SC 1 Surface Overhead Stop 10-X36 630 RF





























jessicalmartinez

Permit Number Batch



1 Door Closer (Pull Side) 7500 689 NO 1 Gasketing S773D PE 1 Electric Power Transfer EL-EPT SU 1 Wire Harness (THRU DOOR) CON-LENGTH AS REQUIRED VD 1 Wire Harness (POWER SUPPLY) CON-192 VD 1 Wire Harness (POWER SUPPLY EXTENSION) CON-6W VD 1 Position Switch DPS-W/M-CAS SU 1 Card Reader SUPPLIED BY DIVISION 28 OT 1 Power Supply SUPPLIED BY DIVISION 28 OT Set: 177.0 Doors: 2.743.3, 2.911, 3.400, 3.410A 3 Hinge (heavy weight) T4A3786 NRP US26D MK 1 EM Mortise Lock (FSE-REX) L9092EUT OME/A RX 630 SC 1 Permanent Core 23-030 626 SC 1 Door Closer (Push Side) PR7500 689 NO 1 Wall Stop 409 US32D RO 1 Gasketing S773D PE 1 Electric Power Transfer EL-EPT SU 1 Wire Harness (THRU DOOR) CON-LENGTH AS REQUIRED VD 1 Wire Harness (POWER SUPPLY) CON-192 VD 1 Wire Harness (POWER SUPPLY EXTENSION) CON-6W VD 1 Position Switch DPS-W/M-CAS SU 1 Card Reader SUPPLIED BY DIVISION 28 OT 1 Power Supply SUPPLIED BY DIVISION 28 OT Set: 178.0 2 Continuous Hinge HG305 x AS 630 MR 2 Exit Device 9847/9847WDC-L-BE-F 996L-BE US32D VD (CVR-UL-PASSAGE) -16 LBR 2 Door Closer (Push Side) PR7500 689 NO 2 Armor Plate (UL) K1050 F 36" 4BE CSK US32D RO 2 Wall Stop 409 US32D RO 1 Gasketing S773D PE 1 Astragal S772D PE 2 Edge Guard EG308 x HDWE Prep x AS 630 MR Set: 179.0 2 Continuous Hinge HG305 CTP x AS 630 MR 2 EM Exit Device QEL 9847/9847WDC-L-BE 996L US32D VD (CVR-UL-QEL-PASSAGE) -BE-16 LBR CON 1 Automatic Opener (PUSH SIDE) 9553 HL/D LONG2 ANCLR LC 2 Armor Plate (UL) K1050 F 36" 4BE CSK US32D RO 2 Wall Stop 409 US32D RO 1 Gasketing S773D PE 1 Astragal S772D PE




































jessicalmartinez

Permit Number Batch



2 Edge Guard EG308 x HDWE Prep x AS 630 MR 2 Electric Power Transfer EL-EPT SU 2 Wire Harness (THRU RAIL) CON-6 VD 2 Wire Harness (POWER SUPPLY) CON-192 VD 2 Wire Harness (POWER SUPPLY EXTENSION) CON-6W VD 4 Touchless Actuator 8310-813 LC 1 Power Supply PS914 900-4RL-FA VD Set: 180.0 6 Hinge (heavy weight) T4A3786 NRP US26D MK 1 Dust Proof Strike 570 US26D RO 1 Flush Bolt 2842/2942 US32D RO 1 Mortise Lock (PASSAGE) L9010 OME/A 630 SC 1 Coordinator 2600 SERIES x WEAR PLATES US28 RO 2 Mounting Bracket 2601AB/C US28 RO 2 Door Closer (Pull Side) 7500 689 NO 2 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 2 Wall Stop 409 US32D RO 1 Gasketing S773D PE 1 Astragal S772D PE Set: 181.0 3 Hinge (heavy weight) T4A3786 US26D MK 1 Mortise Lock HL6-9050 US32D GJ (Office-Hospital Paddle) (Coordinate Paddle MTG Position w/Architect) 1 Permanent Core 23-030 626 SC 1 Electric Strike (FSE) 1006CS 630 HS 1 Concealed Overhead Stop 1-X36 630 RF 1 Automatic Opener (PUSH SIDE) 9542 HL/D LONG ANCLR LC 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Gasketing S773D PE 1 Gasketing S44D PE 1 Door Bottom 411APKL/420APKL PE 1 Wire Harness (POWER SUPPLY) CON-192 VD 1 Wire Harness (POWER SUPPLY EXTENSION) CON-6W VD 2 Touchless Actuator 8310-813 LC 1 Push Button (KEYLESS SWITCH) PB4LA-2 SU 1 Power Supply SUPPLIED BY DIVISION 28 OT Set: 182.0 3 Hinge (heavy weight) T4A3786 US26D MK 1 Mortise Lock HL6-9050 US32D GJ (Office-Hospital Paddle) (Coordinate Paddle MTG Position w/Architect) 1 Permanent Core 23-030 626 SC 1 Electric Strike (FSE) 1006CS 630 HS 1 Surface Overhead Stop 10-X36 630 RF





































jessicalmartinez

Permit Number Batch



1 Automatic Opener (PULL SIDE) 9531 HL/D STD ANCLR LC 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Gasketing S773D PE 1 Gasketing S44D PE 1 Door Bottom 411APKL/420APKL PE 1 Wire Harness (POWER SUPPLY) CON-192 VD 2 Wire Harness (POWER SUPPLY EXTENSION) CON-6W VD 2 Touchless Actuator 8310-813 LC 1 Push Button (KEYLESS SWITCH) PB4LA-2 SU 1 Power Supply SUPPLIED BY DIVISION 28 OT Set: 183.0 1 Continuous Hinge HG305 CTP x AS 630 MR 1 Mortise Lock (PASSAGE) L9010 OME/A 630 SC 1 Electric Strike (FSE) 1006CS 630 HS 1 Automatic Opener (PULL SIDE) 9531 HL/D STD ANCLR LC 1 Mop Plate (UL) K1050 F 4" 4BE CSK US32D RO 1 Armor Plate (UL) K1050 F 36" 4BE CSK US32D RO 1 Wall Stop 409 US32D RO 1 Gasketing S773D PE 1 Edge Guard EG308 x HDWE Prep x AS 630 MR 1 Wire Harness (POWER SUPPLY) CON-192 VD 1 Wire Harness (POWER SUPPLY EXTENSION) CON-6W VD 2 Touchless Actuator 8310-813 LC 1 Power Supply SUPPLIED BY DIVISION 28 OT Set: 184.0 2 Continuous Hinge HG305 CTP x AS 630 MR 2 Multi-Point Lock ELR LC NB 701315 ETMO US26D SA (CLASSROOM-ELR-FSE) 2 Permanent Core 23-030 626 SC 2 Cylinder (MORTISE) 20-061 ICX 626 SC 2 Concealed Overhead Stop 1-X36 630 RF 1 Automatic Opener (PUSH SIDE) 9553 HL/D LONG2 ANCLR LC 2 Armor Plate (UL) K1050 F 36" 4BE CSK US32D RO 1 Gasketing S773D PE 1 Astragal S772D PE 2 Edge Guard EG308 x HDWE Prep x AS 630 MR 2 Electric Power Transfer EL-EPT SU 2 Wire Harness (THRU DOOR) CON-LENGTH AS REQUIRED VD 2 Wire Harness (POWER SUPPLY) CON-192 VD 2 Wire Harness (POWER SUPPLY EXTENSION) CON-6W VD 2 Touchless Actuator 8310-813 LC 1 Push Button (KEYLESS SWITCH) PB4LA-2 SU 1 Power Supply SUPPLIED BY DIVISION 28 OT









































jessicalmartinez

Permit Number Batch



Set: 185.0 1 Continuous Hinge HG305 CTP x AS 630 MR 1 EM Mortise Lock (FSE-REX) L9092EUT OME/A RX 630 SC 1 Permanent Core 23-030 626 SC 1 Door Closer (Pull Side - DEL) 7500 DA 689 NO 1 Mop Plate (UL) K1050 F 4" 4BE CSK US32D RO 1 Armor Plate (UL) K1050 F 36" 4BE CSK US32D RO 1 Wall Stop 409 US32D RO 1 Gasketing S773D PE 1 Edge Guard EG308 x HDWE Prep x AS 630 MR 1 Electric Power Transfer EL-EPT SU 1 Wire Harness (THRU DOOR) CON-LENGTH AS REQUIRED VD 1 Wire Harness (POWER SUPPLY) CON-192 VD 1 Wire Harness (POWER SUPPLY EXTENSION) CON-6W VD 1 Position Switch DPS-W/M-CAS SU 1 Card Reader SUPPLIED BY DIVISION 28 OT 1 Power Supply SUPPLIED BY DIVISION 28 OT Set: 186.0 2 Continuous Hinge FM300 630 MR 2 Exit Device (CVR-UL) 9847/9847WDC-EO-F LBR US32D VD 2 Door Closer (Pull Side) 7500 689 NO 2 Wall Stop 409 US32D RO 2 Electromagnetic Holder 998 TRI-VOLT x SPACER 689 RF EXTENTION AS REQUIRED FOR PROPER INSTALLATION 1 Gasketing S773D PE 2 Door Bottom 411APKL/420APKL PE 1 Astragal S772D PE Notes: Door bottom at door G.C01.1 Set: 187.0 2 Continuous Hinge FM300 CTP 630 MR 2 Multi-Point Lock (UL-FS-REX) LC 12 NB 55 707315 ETMO 106 US26D SA 3 Permanent Core 23-030 626 SC 3 Cylinder (MORTISE) 20-061 ICX 626 SC 1 Door Closer (DBL EGRESS PULL SIDE - SLIDE ARM & TRACK - ELEC-HO FAIL SAFE) 7250MPDO SERIES DBL EGRESS 689 NO 1 Door Closer (DBL EGRESS PULL SIDE - SLIDE ARM & TRACK - ELEC-HO FAIL SAFE) 7250MPSO SERIES DBL EGRESS SLAVE UNIT 689 NO 2 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 2 Wall Stop 409 US32D RO 1 Gasketing S773D PE 1 Astragal S772D PE 2 Electric Power Transfer EL-EPT SU 2 Wire Harness (THRU DOOR) CON-LENGTH AS REQUIRED VD




































jessicalmartinez

Permit Number Batch



2 Wire Harness (POWER SUPPLY) CON-192 VD 2 Wire Harness (POWER SUPPLY EXTENSION) CON-6W VD 2 Position Switch DPS-W/M-CAS SU 1 Card Reader SUPPLIED BY DIVISION 28 OT 1 Keyswitch MKA2 SU 1 Power Supply SUPPLIED BY DIVISION 28 OT Set: 188.0 2 Continuous Hinge FM300 CTP 630 MR 2 EM Exit Device RX QEL 9847/9847WDC-L-E996L US32D VD (CVR-UL-QEL-FSE-REX) -16 FSE LBR CON 2 Cylinder (RIM) 20-057 ICX 626 SC 2 Permanent Core 23-030 626 SC 1 Concealed Overhead Stop 1-X36 630 RF 1 Automatic Opener (PUSH SIDE) 9553 HL/D LONG2 ANCLR LC 2 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Wall Stop 409 US32D RO 1 Gasketing S773D PE 1 Astragal S772D PE 2 Electric Power Transfer EL-EPT SU 2 Wire Harness (THRU RAIL) CON-6 VD 2 Wire Harness (POWER SUPPLY) CON-192 VD 2 Wire Harness (POWER SUPPLY EXTENSION) CON-6W VD 2 Position Switch DPS-W/M-CAS SU 1 Card Reader SUPPLIED BY DIVISION 28 OT 1 Touchless Actuator 8310-813 LC 1 Power Supply PS914 900-4RL-FA VD Set: 189.0 3 Hinge (heavy weight) T4A3786 US26D MK 1 EM Mortise Lock (FS-REX) L9092ELT OME/A RX 630 SC 1 Permanent Core 23-030 626 SC 1 Surface Overhead Stop 10-X36 630 RF 1 Door Closer (PULL SIDE-TRACK) 7500ST 689 NO 1 Gasketing S773D PE 1 Gasketing ACP112BL/2 PE 1 Gasketing S44D PE 1 Door Bottom PDB411AE PE 1 Electric Power Transfer EL-EPT SU 1 Wire Harness (THRU DOOR) CON-LENGTH AS REQUIRED VD 1 Wire Harness (POWER SUPPLY) CON-192 VD 1 Wire Harness (POWER SUPPLY EXTENSION) CON-6W VD 1 Position Switch DPS-W/M-CAS SU 1 Card Reader SUPPLIED BY DIVISION 28 OT 1 Power Supply SUPPLIED BY DIVISION 28 OT 1 Emergency Release and/or OT






































jessicalmartinez

Permit Number Batch



Set: 190.0 2 Continuous Hinge FM300 630 MR 2 Exit Device 9847/9847WDC-L-BE-F 996L-BE US32D VD (CVR-UL-PASSAGE) -16 LBR 1 Door Closer 7210MPDO SERIES 689 NO (PULL SIDE - SLIDE ARM & TRACK - ELEC-HO-FAIL SAFE) 1 Door Closer 7210MPSO SERIES SLAVE UNIT 689 NO (PULL SIDE - SLIDE ARM & TRACK - ELEC-HO FAIL SAFE) 2 Wall Stop 409 US32D RO 1 Gasketing S773D PE 1 Astragal S772D PE Set: 191.0 2 Continuous Hinge FM300 CTP 630 MR 2 Multi-Point Lock (UL-FSE-REX) LC 12 NB 55 707415 ETMO 106 US26D SA 2 Permanent Core 23-030 626 SC 2 Cylinder (MORTISE) 20-061 ICX 626 SC 2 Surface Overhead Stop 10-X36 630 RF 1 Door Closer 7210MPDO SERIES 689 NO (PULL SIDE - SLIDE ARM & TRACK - ELEC-HO-FAIL SAFE) 1 Door Closer 7210MPSO SERIES SLAVE UNIT 689 NO (PULL SIDE - SLIDE ARM & TRACK - ELEC-HO FAIL SAFE) 2 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Gasketing S773D PE 1 Astragal S772D PE 2 Electric Power Transfer EL-EPT SU 2 Wire Harness (THRU DOOR) CON-LENGTH AS REQUIRED VD 2 Wire Harness (POWER SUPPLY) CON-192 VD 2 Wire Harness (POWER SUPPLY EXTENSION) CON-6W VD 2 Position Switch DPS-W/M-CAS SU 1 Card Reader SUPPLIED BY DIVISION 28 OT 1 Power Supply SUPPLIED BY DIVISION 28 OT Set: 192.0 6 Hinge (heavy weight) T4A3786 NRP US26D MK 2 Multi-Point Lock LC 12 NB 701315 ETMO US26D SA (UL-CLASSROOM) 2 Permanent Core 23-030 626 SC 2 Cylinder (MORTISE) 20-061 ICX 626 SC 1 Concealed Overhead Stop 1-X36 630 RF 2 Door Closer (Push Side) PR7500 689 NO 2 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Wall Stop 409 US32D RO 1 Gasketing S773D PE 1 Astragal S772D PE


































jessicalmartinez

Permit Number Batch



Set: 193.0 6 Hinge (heavy weight) T4A3786 NRP US26D MK 2 Multi-Point Lock LC 12 NB 701315 ETMO US26D SA (UL-CLASSROOM) 2 Permanent Core 23-030 626 SC 2 Cylinder (MORTISE) 20-061 ICX 626 SC 2 Surface Overhead Stop 10-X36 630 RF 2 Door Closer (Pull Side) 7500 689 NO 2 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Gasketing S773D PE 1 Astragal S772D PE Set: 194.0 2 Continuous Hinge HG305 CTP x AS 630 MR 2 EM Exit Device QEL 9847/9847WDC-EO-F LBR CON US32D VD (CVR-UL-QEL-FSE-NO REX) 1 Concealed Overhead Stop 1-X36 630 RF 1 Automatic Opener 9560 HL/D DOUBLE EGRESS ANCLR LC (DOUBLE EGRESS) 2 Armor Plate (UL) K1050 F 36" 4BE CSK US32D RO 1 Wall Stop 409 US32D RO 1 Gasketing S773D PE 1 Astragal S772D PE 1 Edge Guard EG308 x HDWE Prep x AS 630 MR 2 Electric Power Transfer EL-EPT SU 2 Wire Harness (THRU RAIL) CON-6 VD 2 Wire Harness (POWER SUPPLY) CON-192 VD 2 Wire Harness (POWER SUPPLY EXTENSION) CON-6W VD 3 Touchless Actuator 8310-813 LC 1 Kit 8310-3809 LC 1 Mounting Box 8310-867F LC 1 Weather Ring 8310-801 LC 1 Power Supply PS914 900-4RL-FA VD Set: 195.0 2 Continuous Hinge HG305 CTP x AS 630 MR 1 Exit Device RX QEL 9847/9847WDC-EO-F LBR CON US32D VD (CVR-UL-QEL-REX-FSE) 1 EM Exit Device QEL 9847/9847WDC-EO-F LBR CON US32D VD (CVR-UL-QEL-FSE-NO REX) 1 Concealed Overhead Stop 1-X36 630 RF 1 Automatic Opener 9560 HL/D DOUBLE EGRESS ANCLR LC (DOUBLE EGRESS) 2 Armor Plate (UL) K1050 F 36" 4BE CSK US32D RO 1 Wall Stop 409 US32D RO 1 Gasketing S773D PE




































jessicalmartinez

Permit Number Batch



1 Astragal S772D PE 2 Edge Guard EG308 x HDWE Prep x AS 630 MR 2 Electric Power Transfer EL-EPT SU 2 Wire Harness (THRU RAIL) CON-6 VD 2 Wire Harness (POWER SUPPLY) CON-192 VD 2 Wire Harness (POWER SUPPLY EXTENSION) CON-6W VD 2 Position Switch DPS-W/M-CAS SU 1 Card Reader SUPPLIED BY DIVISION 28 OT 1 Touchless Actuator 8310-813 LC 1 Power Supply PS914 900-4RL-FA VD Set: 196.0 2 Continuous Hinge HG305 CTP x AS 630 MR 1 Exit Device RX QEL 9847/9847WDC-EO-F LBR CON US32D VD (CVR-UL-QEL-REX-FSE) 1 EM Exit Device QEL 9847/9847WDC-EO-F LBR CON US32D VD (CVR-UL-QEL-FSE-NO REX) 1 Concealed Overhead Stop 1-X36 630 RF 1 Automatic Opener 9560 HL/D DOUBLE EGRESS ANCLR LC (DOUBLE EGRESS) 2 Armor Plate (UL) K1050 F 36" 4BE CSK US32D RO 1 Wall Stop 409 US32D RO 1 Gasketing S773D PE 2 Door Bottom 411APKL/420APKL PE 1 Astragal S772D PE 2 Edge Guard EG308 x HDWE Prep x AS 630 MR 2 Electric Power Transfer EL-EPT SU 2 Wire Harness (THRU RAIL) CON-6 VD 2 Wire Harness (POWER SUPPLY) CON-192 VD 2 Wire Harness (POWER SUPPLY EXTENSION) CON-6W VD 2 Position Switch DPS-W/M-CAS SU 1 Card Reader SUPPLIED BY DIVISION 28 OT 1 Touchless Actuator 8310-813 LC 1 Kit 8310-3809 LC 1 Mounting Box 8310-867F LC 1 Weather Ring 8310-801 LC 1 Power Supply PS914 900-4RL-FA VD Notes: Door Bottoms @ 1.C01 Set: 197.0 3 Hinge (heavy weight) T4A3786 NRP US26D MK 1 Exit Device 9875L-BE-F 996L-BE-16 US32D VD (MORTISE-UL-PASSAGE) 1 Permanent Core 23-030 626 SC 1 Cylinder (MORTISE) 20-061 ICX 626 SC 1 Door Closer (Push Side) PR7500 689 NO




































jessicalmartinez

Permit Number Batch



1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Wall Stop 409 US32D RO 1 Gasketing S773D PE 1 Position Switch DPS-W/M-CAS SU 1 Card Reader SUPPLIED BY DIVISION 28 OT 1 Motion Sensor XMS SU 1 Key Switch - Reset Local Alarm SUPPLIED BY DIVISION 28) OT 1 Local Alarm/Annunciator SUPPLIED BY DIVISION 28 OT Set: 198.0 2 Continuous Hinge HG305 CTP x AS 630 MR 2 EM Exit Device RX 9847/9847WDC-L-E996L-16 US32D SA (CVR-UL-FSE-REX) FSE LBR CON 2 Cylinder (RIM) 20-057 ICX 626 SC 2 Permanent Core 23-030 626 SC 2 Door Closer (Push Side) PR7500 689 NO 2 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 2 Wall Stop 409 US32D RO 1 Gasketing S773D PE 1 Astragal S772D PE 2 Electric Power Transfer EL-EPT SU 2 Wire Harness (THRU RAIL) CON-6 VD 2 Wire Harness (POWER SUPPLY) CON-192 VD 2 Wire Harness (POWER SUPPLY EXTENSION) CON-6W VD 2 Position Switch DPS-W/M-CAS SU 1 Card Reader SUPPLIED BY DIVISION 28 OT 1 Power Supply SUPPLIED BY DIVISION 28 OT Set: 199.0 3 Hinge (heavy weight) T4A3786 NRP US26D MK 1 EM Mortise Lock (FSE-REX) L9092EUT OME/A RX 630 SC 1 Permanent Core 23-030 626 SC 1 Door Closer (Push Side) PR7500 689 NO 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Wall Stop 409 US32D RO 1 Gasketing S773D PE 1 Electric Power Transfer EL-EPT SU 1 Wire Harness (THRU DOOR) CON-LENGTH AS REQUIRED VD 1 Wire Harness (POWER SUPPLY) CON-192 VD 1 Wire Harness (POWER SUPPLY EXTENSION) CON-6W VD 1 Position Switch DPS-W/M-CAS SU 1 Card Reader SUPPLIED BY DIVISION 28 OT 1 Power Supply SUPPLIED BY DIVISION 28 OT Set: 200.0 2 Continuous Hinge HG305 x AS 630 MR



































jessicalmartinez

Permit Number Batch



2 Flush Bolt 555 US26D RO 1 Dust Proof Strike 570 US26D RO 1 Mortise Lock (STOREROOM) L9080T OME/A 630 SC 1 Permanent Core 23-030 626 SC 1 Concealed Overhead Stop 1-X36 630 RF 1 Door Closer (Pull Side - DEL) 7500 DA 689 NO 2 Mop Plate (UL) K1050 F 4" 4BE CSK US32D RO 2 Armor Plate (UL) K1050 F 36" 4BE CSK US32D RO 1 Wall Stop 409 US32D RO 1 Gasketing S773D PE 1 Astragal S772D PE 2 Edge Guard EG308 x HDWE Prep x AS 630 MR Set: 201.0 1 Continuous Hinge HG305 CTP x AS 630 MR 1 EM Mortise Lock L9080T OME/A RX 630 SC (STOREROOM-REX) 1 Permanent Core 23-030 626 SC 1 Electric Strike (FSE) 1006CS 630 HS 1 Automatic Opener (PUSH SIDE) 9542 HL/D LONG ANCLR LC 1 Mop Plate (UL) K1050 F 4" 4BE CSK US32D RO 1 Armor Plate (UL) K1050 F 36" 4BE CSK US32D RO 1 Wall Stop 409 US32D RO 1 Gasketing S773D PE 1 Edge Guard EG308 x HDWE Prep x AS 630 MR 1 Electric Power Transfer EL-EPT SU 1 Wire Harness (THRU DOOR) CON-LENGTH AS REQUIRED VD 2 Wire Harness (POWER SUPPLY) CON-192 VD 2 Wire Harness (POWER SUPPLY EXTENSION) CON-6W VD 1 Position Switch DPS-W/M-CAS SU 1 Card Reader SUPPLIED BY DIVISION 28 OT 1 Touchless Actuator 8310-813 LC 1 Power Supply SUPPLIED BY DIVISION 28 OT Set: 202.0 2 Continuous Hinge HG305 x AS 630 MR 2 Push Pull 111x73C/73CL US32D RO 2 Door Closer (Pull Side w/Hold Open) 7500H 689 NO 2 Mop Plate (UL) K1050 F 4" 4BE CSK US32D RO 2 Armor Plate (UL) K1050 F 36" 4BE CSK US32D RO 2 Wall Stop 409 US32D RO 1 Gasketing S773D PE 1 Astragal S772D PE 2 Edge Guard EG308 x HDWE Prep x AS 630 MR







































jessicalmartinez

Permit Number Batch



Set: 203.0 6 Hinge (heavy weight) T4A3786 US26D MK 2 Push Pull 111x73C/73CL US32D RO 2 Door Closer (Push Side w/Hold Open) PR7500H 689 NO 2 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 2 Wall Stop 409 US32D RO 1 Gasketing S773D PE 1 Astragal S772D PE Set: 204.0 3 Hinge (heavy weight) T4A3786 US26D MK 1 Mortise Lock (PASSAGE) L9010 OME/A 630 SC 1 Surface Overhead Stop 10-X36 630 RF 1 Door Closer (Pull Side) 7500 689 NO 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Mop Plate (UL) K1050 F 4" 4BE CSK US32D RO 1 Gasketing S773D PE Set: 205.0 3 Hinge (heavy weight) T4A3786 NRP US26D MK 1 EM Mortise Lock (FSE-REX) L9092EUT OME/A RX 630 SC 1 Permanent Core 23-030 626 SC 1 Door Closer (Pull Side) 7500 689 NO 1 Wall Stop 409 US32D RO 1 Gasketing S773D PE 1 Gasketing ACP112BL/2 PE 1 Gasketing S44D PE 1 Door Bottom PDB411AE PE 1 Electric Power Transfer EL-EPT SU 1 Wire Harness (THRU DOOR) CON-LENGTH AS REQUIRED VD 1 Wire Harness (POWER SUPPLY) CON-192 VD 1 Wire Harness (POWER SUPPLY EXTENSION) CON-6W VD 1 Position Switch DPS-W/M-CAS SU 1 Card Reader SUPPLIED BY DIVISION 28 OT 1 Power Supply SUPPLIED BY DIVISION 28 OT Set: 206.0 1 Continuous Hinge HG305 CTP x AS 630 MR 1 EM Mortise Lock (FSE-REX) L9092EUT OME/A RX 630 SC 1 Permanent Core 23-030 626 SC 1 Door Closer (Push Side) PR7500 689 NO 1 Armor Plate (UL) K1050 F 36" 4BE CSK US32D RO 1 Wall Stop 409 US32D RO 1 Gasketing S773D PE 1 Edge Guard EG308 x HDWE Prep x AS 630 MR






































jessicalmartinez

Permit Number Batch



1 Electric Power Transfer EL-EPT SU 1 Wire Harness (THRU DOOR) CON-LENGTH AS REQUIRED VD 1 Wire Harness (POWER SUPPLY) CON-192 VD 1 Wire Harness (POWER SUPPLY EXTENSION) CON-6W VD 1 Position Switch DPS-W/M-CAS SU 1 Card Reader SUPPLIED BY DIVISION 28 OT 1 Power Supply SUPPLIED BY DIVISION 28 OT Set: 207.0 2 Continuous Hinge FM300 630 MR 2 Exit Device (CVR-UL) 9847/9847WDC-EO-F LBR US32D VD 2 Surface Overhead Stop 10-X36 630 RF 1 Door Closer 7250MPDO SERIES DBL EGRESS 689 NO (DBL EGRESS PULL SIDE - SLIDE ARM & TRACK - ELEC-HO FAIL SAFE) 1 Door Closer 7250MPSO SERIES DBL EGRESS SLAVE UNIT 689 NO (DBL EGRESS PULL SIDE - SLIDE ARM & TRACK - ELEC-HO FAIL SAFE) 1 Gasketing S773D PE 1 Astragal S772D PE Set: 208.0 2 Continuous Hinge HG305 (2) CTP AS 630 MR 2 Multi-Point Lock ELR LC 12 NB 55 707415 ETMO 106 US26D SA (UL-ELR-FSE-REX) 2 Permanent Core 23-030 626 SC 2 Cylinder (MORTISE) 20-061 ICX 626 SC 1 Concealed Overhead Stop 1-X36 630 RF 1 Automatic Opener (PULL SIDE) 9553 HL/D REG2 ANCLR LC 2 Mop Plate (UL) K1050 F 4" 4BE CSK US32D RO 2 Armor Plate (UL) K1050 F 36" 4BE CSK US32D RO 1 Wall Stop 409 US32D RO 1 Gasketing S773D PE 1 Astragal S772D PE 2 Edge Guard EG308 x HDWE Prep x AS 630 MR 4 Electric Power Transfer EL-EPT SU 4 Wire Harness (THRU DOOR) CON-LENGTH AS REQUIRED VD 4 Wire Harness (POWER SUPPLY) CON-192 VD 4 Wire Harness (POWER SUPPLY EXTENSION) CON-6W VD 2 Position Switch DPS-W/M-CAS SU 1 Card Reader SUPPLIED BY DIVISION 28 OT 1 Touchless Actuator 8310-813 LC 1 Power Supply SUPPLIED BY DIVISION 28 OT Set: 209.0 2 Continuous Hinge FM300 CTP 630 MR 2 EM Exit Device RX QEL 9847/9847WDC-L-E996L US32D VD (CVR-UL-QEL-FSE-REX) -16 FSE LBR CON



































jessicalmartinez

Permit Number Batch



2 Cylinder (RIM) 20-057 ICX 626 SC 2 Permanent Core 23-030 626 SC 1 Automatic Opener (PUSH SIDE) 9553 HL/D LONG2 ANCLR LC 2 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 2 Wall Stop 409 US32D RO 1 Gasketing S773D PE 1 Astragal S772D PE 2 Electric Power Transfer EL-EPT SU 2 Wire Harness (THRU RAIL) CON-6 VD 2 Wire Harness (POWER SUPPLY) CON-192 VD 2 Wire Harness (POWER SUPPLY EXTENSION) CON-6W VD 2 Position Switch DPS-W/M-CAS SU 1 Card Reader SUPPLIED BY DIVISION 28 OT 1 Touchless Actuator 8310-813 LC 1 Safety Sensor Package Simultaneous Pair 8310-3891 LC 1 Power Supply PS914 900-4RL-FA VD Set: 210.0 6 Hinge (heavy weight) T4A3786 NRP US26D MK 2 Multi-Point Lock LC 12 NB 701315 ETMO US26D SA (UL-CLASSROOM) 2 Permanent Core 23-030 626 SC 2 Cylinder (MORTISE) 20-061 ICX 626 SC 2 Door Closer (Pull Side) 7500 689 NO 2 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 2 Wall Stop 409 US32D RO 1 Gasketing S773D PE 1 Astragal S772D PE Set: 211.0 2 Continuous Hinge HG305 CTP x AS 630 MR 2 EM Exit Device RX 9847/9847WDC-L-E996L-16 US32D SA (CVR-UL-FSE-REX) FSE LBR CON 2 Cylinder (RIM) 20-057 ICX 626 SC 2 Permanent Core 23-030 626 SC 2 Concealed Overhead Stop 1-X36 630 RF 2 Door Closer (Push Side) PR7500 689 NO 2 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Gasketing S773D PE 1 Astragal S772D PE 2 Electric Power Transfer EL-EPT SU 2 Wire Harness (THRU RAIL) CON-6 VD 2 Wire Harness (POWER SUPPLY) CON-192 VD 2 Wire Harness (POWER SUPPLY EXTENSION) CON-6W VD 2 Position Switch DPS-W/M-CAS SU 1 Card Reader SUPPLIED BY DIVISION 28 OT 1 Power Supply SUPPLIED BY DIVISION 28 OT








































jessicalmartinez

Permit Number Batch



Set: 212.0 2 Continuous Hinge FM300 630 MR 2 Exit Device (CVR-UL) 9847/9847WDC-EO-F LBR US32D VD 2 Concealed Overhead Stop 1-X36 630 RF 2 Door Closer (Push Side) PR7500 689 NO 2 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Gasketing S773D PE 1 Astragal S772D PE Set: 213.0 2 Continuous Hinge HG305 CTP x AS 630 MR 2 Multi-Point Lock ELR LC NB 701315 ETMO US26D SA (CLASSROOM-ELR-FSE) 2 Permanent Core 23-030 626 SC 2 Cylinder (MORTISE) 20-061 ICX 626 SC 1 Automatic Opener (PUSH SIDE) 9553 HL/D LONG2 ANCLR LC 2 Armor Plate (UL) K1050 F 36" 4BE CSK US32D RO 2 Wall Stop 409 US32D RO 1 Gasketing S773D PE 1 Astragal S772D PE 2 Edge Guard EG308 x HDWE Prep x AS 630 MR 2 Electric Power Transfer EL-EPT SU 2 Wire Harness (THRU DOOR) CON-LENGTH AS REQUIRED VD 2 Wire Harness (POWER SUPPLY) CON-192 VD 2 Wire Harness (POWER SUPPLY EXTENSION) CON-6W VD 2 Touchless Actuator 8310-813 LC 1 Push Button (KEYLESS SWITCH) PB4LA-2 SU 1 Power Supply SUPPLIED BY DIVISION 28 OT Set: 214.0 6 Hinge (heavy weight) T4A3786 NRP US26D MK 2 Flush Bolt 555 US26D RO 1 Dust Proof Strike 570 US26D RO 1 Mortise Lock (STOREROOM) L9080T OME/A 630 SC 1 Permanent Core 23-030 626 SC 1 Door Closer (Push Side w/Stop Arm) CLP7500 689 NO 2 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 2 Wall Stop 409 US32D RO 1 Gasketing, Astragal and Door Bottom System OT SUPPLIED BY SOUND DOOR MFG/SUPPLIER Set: 215.0 1 Continuous Hinge HG305 CTP x AS 630 MR 1 EM Exit Device RX 9875L-F E996L-16 FSE CON US32D VD



































jessicalmartinez

Permit Number Batch



(MORTISE-UL-SEC-REX) 1 Automatic Opener (PULL SIDE) 9531 HL/D STD ANCLR LC 1 Mop Plate (UL) K1050 F 4" 4BE CSK US32D RO 1 Armor Plate (UL) K1050 F 36" 4BE CSK US32D RO 1 Wall Stop 409 US32D RO 1 Gasketing S773D PE 1 Edge Guard EG308 x HDWE Prep x AS 630 MR 1 Electric Power Transfer EL-EPT SU 1 Wire Harness (THRU RAIL) CON-6 VD 1 Wire Harness (POWER SUPPLY) CON-192 VD 1 Wire Harness (POWER SUPPLY EXTENSION) CON-6W VD 1 Touchless Actuator 8310-813 LC 1 Power Supply SUPPLIED BY DIVISION 28 OT Set: 216.0 2 Continuous Hinge HG305 (2) CTP AS 630 MR 2 Multi-Point Lock ELR LC 12 NB 55 707415 ETMO 106 US26D SA (UL-ELR-FSE-REX) 2 Permanent Core 23-030 626 SC 2 Cylinder (MORTISE) 20-061 ICX 626 SC 1 Automatic Opener (PUSH SIDE) 9553 HL/D LONG2 ANCLR LC 2 Armor Plate (UL) K1050 F 36" 4BE CSK US32D RO 2 Wall Stop 409 US32D RO 1 Gasketing S773D PE 1 Astragal S772D PE 2 Edge Guard EG308 x HDWE Prep x AS 630 MR 4 Electric Power Transfer EL-EPT SU 4 Wire Harness (THRU DOOR) CON-LENGTH AS REQUIRED VD 4 Wire Harness (POWER SUPPLY) CON-192 VD 4 Wire Harness (POWER SUPPLY EXTENSION) CON-6W VD 2 Position Switch DPS-W/M-CAS SU 1 Card Reader SUPPLIED BY DIVISION 28 OT 1 Touchless Actuator 8310-813 LC 1 Power Supply SUPPLIED BY DIVISION 28 OT Set: 217.0 2 Continuous Hinge HG305 (2) CTP AS 630 MR 2 Multi-Point Lock ELR LC 12 NB 55 707415 ETMO 106 US26D SA (UL-ELR-FSE-REX) 2 Permanent Core 23-030 626 SC 2 Cylinder (MORTISE) 20-061 ICX 626 SC 1 Automatic Opener (PULL SIDE) 9553 HL/D REG2 ANCLR LC 2 Armor Plate (UL) K1050 F 36" 4BE CSK US32D RO 2 Wall Stop 409 US32D RO 2 Electromagnetic Holder 998 TRI-VOLT x SPACER 689 RF EXTENTION AS REQUIRED FOR PROPER INSTALLATION 1 Gasketing S773D PE







































jessicalmartinez

Permit Number Batch



1 Astragal S772D PE 2 Edge Guard EG308 x HDWE Prep x AS 630 MR 4 Electric Power Transfer EL-EPT SU 4 Wire Harness (THRU DOOR) CON-LENGTH AS REQUIRED VD 4 Wire Harness (POWER SUPPLY) CON-192 VD 4 Wire Harness (POWER SUPPLY EXTENSION) CON-6W VD 2 Position Switch DPS-W/M-CAS SU 1 Card Reader SUPPLIED BY DIVISION 28 OT 1 Touchless Actuator 8310-813 LC 1 Power Supply SUPPLIED BY DIVISION 28 OT Set: 218.0 1 Continuous Hinge HG305 CTP x AS 630 MR 1 EM Mortise Lock (FSE-REX) L9092EUT OME/A RX 630 SC 1 Permanent Core 23-030 626 SC 1 Door Closer (Pull Side - DEL) 7500 DA 689 NO 1 Mop Plate (UL) K1050 F 4" 4BE CSK US32D RO 1 Armor Plate (UL) K1050 F 36" 4BE CSK US32D RO 1 Wall Stop 409 US32D RO 1 Electromagnetic Holder 998 TRI-VOLT x SPACER 689 RF EXTENTION AS REQUIRED FOR PROPER INSTALLATION 1 Gasketing S773D PE 1 Edge Guard EG308 x HDWE Prep x AS 630 MR 1 Electric Power Transfer EL-EPT SU 1 Wire Harness (THRU DOOR) CON-LENGTH AS REQUIRED VD 1 Wire Harness (POWER SUPPLY) CON-192 VD 1 Wire Harness (POWER SUPPLY EXTENSION) CON-6W VD 1 Position Switch DPS-W/M-CAS SU 1 Card Reader SUPPLIED BY DIVISION 28 OT 1 Power Supply SUPPLIED BY DIVISION 28 OT Set: 219.0 1 Continuous Hinge HG305 CTP x AS 630 MR 1 EM Mortise Lock (FSE-REX) L9092EUT OME/A RX 630 SC 1 Permanent Core 23-030 626 SC 1 Electric Strike (FSE) 1006CS 630 HS 1 Automatic Opener (PULL SIDE) 9531 HL/D STD ANCLR LC 1 Mop Plate (UL) K1050 F 4" 4BE CSK US32D RO 1 Armor Plate (UL) K1050 F 36" 4BE CSK US32D RO 1 Wall Stop 409 US32D RO 1 Electromagnetic Holder 998 TRI-VOLT x SPACER 689 RF EXTENTION AS REQUIRED FOR PROPER INSTALLATION 1 Gasketing S773D PE 1 Edge Guard EG308 x HDWE Prep x AS 630 MR 1 Electric Power Transfer EL-EPT SU 1 Wire Harness (THRU DOOR) CON-LENGTH AS REQUIRED VD 2 Wire Harness (POWER SUPPLY) CON-192 VD








































jessicalmartinez

Permit Number Batch



2 Wire Harness (POWER SUPPLY EXTENSION) CON-6W VD 1 Position Switch DPS-W/M-CAS SU 1 Card Reader SUPPLIED BY DIVISION 28 OT 1 Touchless Actuator 8310-813 LC 1 Power Supply SUPPLIED BY DIVISION 28 OT Set: 220.0 1 Continuous Hinge HG305 CTP x AS 630 MR 1 EM Mortise Lock (FSE-REX) L9092EUT OME/A RX 630 SC 1 Permanent Core 23-030 626 SC 1 Electric Strike (FSE) 1006CS 630 HS 1 Automatic Opener (PULL SIDE) 9531 HL/D STD ANCLR LC 1 Mop Plate (UL) K1050 F 4" 4BE CSK US32D RO 1 Armor Plate (UL) K1050 F 36" 4BE CSK US32D RO 1 Wall Stop 409 US32D RO 1 Gasketing S773D PE 1 Edge Guard EG308 x HDWE Prep x AS 630 MR 1 Electric Power Transfer EL-EPT SU 1 Wire Harness (THRU DOOR) CON-LENGTH AS REQUIRED VD 2 Wire Harness (POWER SUPPLY) CON-192 VD 2 Wire Harness (POWER SUPPLY EXTENSION) CON-6W VD 1 Position Switch DPS-W/M-CAS SU 1 Card Reader SUPPLIED BY DIVISION 28 OT 1 Touchless Actuator 8310-813 LC 1 Power Supply SUPPLIED BY DIVISION 28 OT Set: 221.0 2 Continuous Hinge HG305 (2) CTP AS 630 MR 2 Multi-Point Lock ELR LC 12 NB 55 707415 ETMO 106 US26D SA (UL-ELR-FSE-REX) 2 Permanent Core 23-030 626 SC 2 Cylinder (MORTISE) 20-061 ICX 626 SC 1 Automatic Opener (PUSH SIDE) 9553 HL/D LONG2 ANCLR LC 2 Armor Plate (UL) K1050 F 36" 4BE CSK US32D RO 2 Wall Stop 409 US32D RO 2 Electromagnetic Holder 998 TRI-VOLT x SPACER 689 RF EXTENTION AS REQUIRED FOR PROPER INSTALLATION 1 Gasketing S773D PE 1 Astragal S772D PE 2 Edge Guard EG308 x HDWE Prep x AS 630 MR 4 Electric Power Transfer EL-EPT SU 4 Wire Harness (THRU DOOR) CON-LENGTH AS REQUIRED VD 4 Wire Harness (POWER SUPPLY) CON-192 VD 4 Wire Harness (POWER SUPPLY EXTENSION) CON-6W VD 2 Position Switch DPS-W/M-CAS SU 1 Card Reader SUPPLIED BY DIVISION 28 OT 1 Touchless Actuator 8310-813 LC







































jessicalmartinez

Permit Number Batch



1 Power Supply SUPPLIED BY DIVISION 28 OT Set: 222.0 6 Hinge (heavy weight) T4A3786 US26D MK 1 Dust Proof Strike 570 US26D RO 1 Flush Bolt 2842/2942 US32D RO 1 Exit Device 9875L-BE-F 996L-BE-16 US32D VD (MORTISE-UL-PASSAGE) 1 Coordinator 2600 SERIES x WEAR PLATES US28 RO 2 Mounting Bracket 2601AB/C US28 RO 2 Door Closer (Push Side) PR7500 689 NO 2 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 2 Wall Stop 409 US32D RO 1 Gasketing S773D PE 1 Astragal S772D PE Set: 223.0 1 Continuous Hinge HG305 CTP x AS 630 MR 1 EM Mortise Lock (FSE-REX) L9092EUT OME/A RX 630 SC 1 Permanent Core 23-030 626 SC 1 Electric Strike (FSE) 1006CS 630 HS 1 Surface Overhead Stop 10-X36 630 RF 1 Automatic Opener (PULL SIDE) 9531 HL/D STD ANCLR LC 1 Mop Plate (UL) K1050 F 4" 4BE CSK US32D RO 1 Armor Plate (UL) K1050 F 36" 4BE CSK US32D RO 1 Gasketing S773D PE 1 Edge Guard EG308 x HDWE Prep x AS 630 MR 1 Electric Power Transfer EL-EPT SU 1 Wire Harness (THRU DOOR) CON-LENGTH AS REQUIRED VD 2 Wire Harness (POWER SUPPLY) CON-192 VD 2 Wire Harness (POWER SUPPLY EXTENSION) CON-6W VD 1 Position Switch DPS-W/M-CAS SU 1 Card Reader SUPPLIED BY DIVISION 28 OT 1 Touchless Actuator 8310-813 LC 1 Power Supply SUPPLIED BY DIVISION 28 OT Set: 224.0 1 Continuous Hinge HG305 x AS 630 MR 1 Mortise Lock (PASSAGE) L9010 OME/A 630 SC 1 Door Closer (Pull Side - DEL) 7500 DA 689 NO 1 Mop Plate (UL) K1050 F 4" 4BE CSK US32D RO 1 Armor Plate (UL) K1050 F 36" 4BE CSK US32D RO 1 Wall Stop 409 US32D RO 1 Gasketing S773D PE 1 Edge Guard EG308 x HDWE Prep x AS 630 MR






































jessicalmartinez

Permit Number Batch



Set: 225.0 1 Continuous Hinge HG305 CTP x AS 630 MR 1 Mortise Lock (PASSAGE) L9010 OME/A 630 SC 1 Electric Strike (FSE) 1006CS 630 HS 1 Automatic Opener (PULL SIDE) 9531 HL/D STD ANCLR LC 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Mop Plate (UL) K1050 F 4" 4BE CSK US32D RO 1 Wall Stop 409 US32D RO 1 Gasketing S773D PE 1 Edge Guard EG308 x HDWE 630 MR Prep x Cut to Length (top of edge guard in line with top of armor plate) x AS 1 Wire Harness (POWER SUPPLY) CON-192 VD 2 Wire Harness (POWER SUPPLY EXTENSION) CON-6W VD 2 Touchless Actuator 8310-813 LC 1 Power Supply SUPPLIED BY DIVISION 28 OT Set: 226.0 3 Hinge (heavy weight) T4A3786 US26D MK 1 EM Mortise Lock (FSE-REX) L9092EUT OME/A RX 630 SC 1 Permanent Core 23-030 626 SC 1 Surface Overhead Stop 10-X36 630 RF 1 Door Closer (Pull Side) 7500 689 NO 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Mop Plate (UL) K1050 F 4" 4BE CSK US32D RO 1 Gasketing S773D PE 1 Electric Power Transfer EL-EPT SU 1 Wire Harness (THRU DOOR) CON-LENGTH AS REQUIRED VD 1 Wire Harness (POWER SUPPLY) CON-192 VD 1 Wire Harness (POWER SUPPLY EXTENSION) CON-6W VD 1 Position Switch DPS-W/M-CAS SU 1 Card Reader SUPPLIED BY DIVISION 28 OT 1 Power Supply SUPPLIED BY DIVISION 28 OT 1 Door Chime SUPPLIED BY DIVISION 28 OT Set: 227.0 1 Continuous Hinge FM300 CTP 630 MR 1 Continuous Hinge FM300 630 MR 1 Dust Proof Strike 570 US26D RO 1 Flush Bolt 2842/2942 US32D RO 1 EM Mortise Lock (FSE-REX) L9092EUT OME/A RX 630 SC 1 Permanent Core 23-030 626 SC 1 Coordinator 2600 SERIES x WEAR PLATES US28 RO 1 Mounting Bracket 2601AB/C US28 RO 2 Concealed Overhead Stop 1-X36 630 RF 2 Door Closer (Push Side w/Hold Open) PR7500H 689 NO







































jessicalmartinez

Permit Number Batch



2 Armor Plate (UL) K1050 F 36" 4BE CSK US32D RO 1 Gasketing S773D PE 1 Astragal S772D PE 1 Edge Guard EG308 x HDWE Prep x AS 630 MR 1 Electric Power Transfer EL-EPT SU 1 Wire Harness (THRU RAIL) CON-6 VD 1 Wire Harness (POWER SUPPLY) CON-192 VD 1 Wire Harness (POWER SUPPLY EXTENSION) CON-6W VD 2 Position Switch DPS-W/M-CAS SU 1 Card Reader SUPPLIED BY DIVISION 28 OT 1 Power Supply SUPPLIED BY DIVISION 28 OT Set: 228.0 2 Continuous Hinge HG305 x AS 630 MR 1 Dust Proof Strike 570 US26D RO 1 Flush Bolt 2842/2942 US32D RO 1 Mortise Lock (Passage-Hospital Paddle) HL6-9010 L (Coordinate Paddle MTG Position w/Architect) US32D GJ 1 Coordinator 2600 SERIES x WEAR PLATES US28 RO 1 Mounting Bracket 2601AB/C US28 RO 2 Door Closer PR7500 DA 689 NO 4 Armor Plate (UL) K1050 F 36" 4BE CSK US32D RO 2 Wall Stop 409 US32D RO 1 Gasketing S773D PE 1 Astragal S772D PE 1 Edge Guard Astragal LL EGT308 x HDWE Prep x Full Height x AS x LL 630 MR 1 Edge Guard EG308 x HDWE Prep x AS 630 MR Set: 229.0 1 Continuous Hinge HG305 x AS 630 MR 1 Mortise Lock HL6-9010 US32D GJ (Passage-Hospital Paddle) (Coordinate Paddle MTG Position w/Architect) 1 Door Closer (Pull Side) 7500 689 NO 2 Armor Plate (UL) K1050 F 36" 4BE CSK US32D RO 1 Wall Stop 409 US32D RO 1 Gasketing S773D PE 1 Edge Guard EG308 x HDWE Prep x AS 630 MR Set: 230.0 2 Pivot Set L147 626 RF 2 Intermediate Pivot ML19 626 RF 1 Dust Proof Strike 570 US26D RO 1 Flush Bolt LL 2845/2945 x Lead Line Box US26D RO 1 Mortise Lock HL6-9010 L US32D GJ (Passage-Hospital Paddle) (Coordinate Paddle MTG Position w/Architect) 1 Coordinator 2600 SERIES x WEAR PLATES US28 RO


































jessicalmartinez

Permit Number Batch



1 Mounting Bracket 2601AB/C US28 RO 2 Surface Closer PR7500 DA MLL 689 NO (Push Side - DEL- LL) 4 Armor Plate (UL) K1050 F 36" 4BE CSK US32D RO 2 Wall Stop 409 US32D RO 1 Gasketing S773D PE 1 Gasketing ACP112BL/2 PE 2 Door Bottom 411APKL/420APKL x Lead Line Channel PE 1 Astragal S772D PE 1 Edge Guard Astragal LL EGT308 x HDWE Prep x Full Height x AS x LL 630 MR 1 Edge Guard EG308 x HDWE Prep x AS 630 MR Set: 231.0 1 Pivot Set L147 626 RF 1 Intermediate Pivot ML19 626 RF 1 Mortise Lock HL6-9010 L US32D GJ (Passage-Hospital Paddle) (Coordinate Paddle MTG Position w/Architect) 1 Door Closer (Pull Side - LL) 7500 MLL 689 NO 2 Armor Plate (UL) K1050 F 36" 4BE CSK US32D RO 1 Wall Stop 409 US32D RO 1 Gasketing S773D PE 1 Edge Guard EG308 x HDWE Prep x AS 630 MR Set: 232.0 2 Pivot Set L147 626 RF 2 Intermediate Pivot ML19 626 RF 1 Dust Proof Strike 570 US26D RO 1 Flush Bolt 2842/2942 x Lead Line Box US32D RO 1 Mortise Lock HL6-9010 L US32D GJ (Passage-Hospital Paddle) (Coordinate Paddle MTG Position w/Architect) 1 Coordinator 2600 SERIES x WEAR PLATES US28 RO 2 Mounting Bracket 2601AB/C US28 RO 2 Concealed Overhead Stop - LL 1-X36 x Lead Line Channel 630 RF 2 Surface Closer PR7500 DA MLL 689 NO (Push Side - DEL- LL) 4 Armor Plate (UL) K1050 F 36" 4BE CSK US32D RO 1 Gasketing S773D PE 1 Gasketing ACP112BL/2 PE 1 Gasketing S44D PE 2 Door Bottom 411APKL/420APKL x Lead Line Channel PE 1 Astragal S772D PE 1 Edge Guard Astragal LL EGT308 x HDWE Prep x Full Height x AS x LL 630 MR 1 Edge Guard EG308 x HDWE Prep x AS 630 MR Set: 233.0 2 Pivot Set L147 626 RF



































jessicalmartinez

Permit Number Batch



2 Intermediate Pivot ML19 626 RF 1 Dust Proof Strike 570 US26D RO 1 Flush Bolt 2842/2942 x Lead Line Box US32D RO 1 Mortise Lock HL6-9010 L US32D GJ (Passage-Hospital Paddle) (Coordinate Paddle MTG Position w/Architect) 1 Coordinator 2600 SERIES x WEAR PLATES US28 RO 2 Mounting Bracket 2601AB/C US28 RO 2 Surface Closer PR7500 DA MLL 689 NO (Push Side - DEL- LL) 4 Armor Plate (UL) K1050 F 36" 4BE CSK US32D RO 2 Wall Stop 409 US32D RO 1 Gasketing S773D PE 1 Gasketing ACP112BL/2 PE 1 Gasketing S44D PE 2 Door Bottom 411APKL/420APKL x Lead Line Channel PE 1 Astragal S772D PE 1 Edge Guard Astragal LL EGT308 x HDWE Prep x Full Height x AS x LL 630 MR 1 Edge Guard EG308 x HDWE Prep x AS 630 MR Set: 234.0 1 Pivot Set L147 626 RF 1 Intermediate Pivot ML19 626 RF 1 Mortise Lock (PASSAGE LL) L9010 OME/A XL11-515 630 SC 1 Surface Overhead Stop 10-X36 630 RF 1 Door Closer (Pull Side - LL) 7500 MLL 689 NO 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Gasketing S773D PE Set: 235.0 1 Pivot Set L147 626 RF 1 Intermediate Pivot ML19 626 RF 1 Mortise Lock (PASSAGE LL) L9010 OME/A XL11-515 630 SC 1 Door Closer (Pull Side - LL) 7500 MLL 689 NO 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Wall Stop 409 US32D RO 1 Gasketing S773D PE Set: 236.0 1 Pivot Set L147 626 RF 1 Intermediate Pivot ML19 626 RF 1 Mortise Lock L9040 L583-363 OME/A L283-722 XL11-515 630 SC (PRIVACY W/IND x ADA T-TURN x LL) 1 Concealed Overhead Stop - LL 1-X36 x Lead Line Channel 630 RF 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Gasketing S773D PE




































jessicalmartinez

Permit Number Batch



Set: 237.0 1 Pivot Set L147 626 RF 1 Intermediate Pivot ML19 626 RF 1 Mortise Lock (PASSAGE LL) L9010 OME/A XL11-515 630 SC 1 Wall Stop 409 US32D RO 1 Gasketing S773D PE Set: 238.0 2 Pivot Set L147 626 RF 2 Intermediate Pivot ML19 626 RF 1 Dust Proof Strike 570 US26D RO 1 Flush Bolt LL 2845/2945 x Lead Line Box US26D RO 1 Mortise Lock (PASSAGE LL) L9010 OME/A XL11-515 630 SC 1 Coordinator 2600 SERIES x WEAR PLATES US28 RO 2 Mounting Bracket 2601AB/C US28 RO 2 Surface Overhead Stop 10-X36 630 RF 2 Door Closer (Pull Side - LL) 7500 MLL 689 NO 2 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Gasketing S773D PE 1 Gasketing ACP112BL/2 PE 1 Gasketing S44D PE 2 Door Bottom 411APKL/420APKL x Lead Line Channel PE 1 Astragal S772D PE 1 Edge Guard Astragal LL EGT308 x HDWE Prep x Full Height x AS x LL 630 MR Set: 239.0 2 Pivot Set L147 626 RF 2 Intermediate Pivot ML19 626 RF 1 Dust Proof Strike 570 US26D RO 1 Flush Bolt 2842/2942 x Lead Line Box US32D RO 1 Mortise Lock HL6-9010 L US32D GJ (Passage-Hospital Paddle) (Coordinate Paddle MTG Position w/Architect) 1 Coordinator 2600 SERIES x WEAR PLATES US28 RO 2 Mounting Bracket 2601AB/C US28 RO 2 Surface Overhead Stop 10-X36 630 RF 2 Surface Closer 7500 DA MLL 689 NO 4 Armor Plate (UL) K1050 F 36" 4BE CSK US32D RO 1 Gasketing S773D PE 1 Gasketing ACP112BL/2 PE 1 Gasketing S44D PE 2 Door Bottom 411APKL/420APKL x Lead Line Channel PE 1 Astragal S772D PE 1 Edge Guard Astragal LL EGT308 x HDWE Prep x Full Height x AS x LL 630 MR 1 Edge Guard EG308 x HDWE Prep x AS 630 MR






































jessicalmartinez

Permit Number Batch



Set: 240.0 Doors: 2.240.3.1 1 Continuous Hinge FM300 HT CTP TORX 630 MR 1 Behavioral Lock LC 8272-24V BHL US32D SA 1 Permanent Core 23-030 626 SC 1 Cylinder (MORTISE) 20-061 ICX 626 SC 1 Concealed Closer 268 CSP EN SA 1 Kick Plate (UL) K1050 F 16" B4E TORX CSK US32D RO 1 Wall Stop 409 TORX US32D RO 1 Gasketing 290AV x Torx PE (FASTENERS TO BE INSTALLED 1" FROM ENDS AND AT 6" ON CENTER, MAXIMUM) 1 Wire Harness (THRU DOOR) CON-LENGTH AS REQUIRED VD 1 Wire Harness (POWER SUPPLY) CON-192 VD 1 Wire Harness (POWER SUPPLY EXTENSION) CON-6W VD 1 Electric Power Transfer EL-EPT TORX SU 1 Position Switch DPS-W/M-CAS SU 1 Card Reader SUPPLIED BY DIVISION 28 OT 1 Power Supply SUPPLIED BY DIVISION 28 OT Notes: Door normally closed and locked with restricted egress at all times. Valid card read will momentarily unlock door. Door locks from both sides with loss of power. Set: 241.0 Doors: 2.241, 2.242, 2.243, 2.244, 2.245, 2.246 1 Continuous Hinge FM300 HT CTP TORX 630 MR 1 Behavioral Lock LC 8272-24V BHL US32D SA 2 Permanent Core 23-030 626 SC 2 Cylinder (MORTISE) 20-061 ICX 626 SC 1 Wall Stop 409 TORX US32D RO 1 Gasketing 290AV x Torx PE (FASTENERS TO BE INSTALLED 1" FROM ENDS AND AT 6" ON CENTER, MAXIMUM) 1 Wire Harness (THRU DOOR) CON-LENGTH AS REQUIRED VD 1 Wire Harness (POWER SUPPLY) CON-192 VD 1 Wire Harness (POWER SUPPLY EXTENSION) CON-6W VD 1 Electric Power Transfer EL-EPT TORX SU 1 Power Supply SUPPLIED BY DIVISION 28 OT 1 Emergency Release and/or Duress Button (Nurse Station) SUPPLIED BY DIVISION 28 OT Notes: Door normally closed and locked with restricted egress at all times. Valid card read will momentarily unlock door. Door locks from both sides with loss of power. Set: 242.0 1 Continuous Hinge FM300 HT TORX 630 MR 1 Behavioral Lock (PASSAGE) 8215 BHL US32D SA



































jessicalmartinez

Permit Number Batch



1 Kick Plate (UL) K1050 F 16" B4E TORX CSK US32D RO 1 Wall Stop 409 TORX US32D RO 1 Gasketing 290AV x Torx PE (FASTENERS TO BE INSTALLED 1" FROM ENDS AND AT 6" ON CENTER, MAXIMUM) Set: 243.0 1 Continuous Hinge FM300 HT TORX 630 MR 1 Behavioral Lock (PASSAGE) 8215 BHL US32D SA 1 Conc Overhead Stop 1-X36 Torx 630 RF 1 Kick Plate (UL) K1050 F 16" B4E TORX CSK US32D RO 1 Kick Plate (UL) K1050 4" B4E TORX CSK US32D RO 1 Gasketing 290AV x Torx PE (FASTENERS TO BE INSTALLED 1" FROM ENDS AND AT 6" ON CENTER, MAXIMUM) Set: 244.0 1 Continuous Hinge HG305 HT AS TORX 630 MR 1 Behavioral Lock (CLASSROOM) LC 8237 BHL US32D SA 1 Permanent Core 23-030 626 SC 1 Cylinder (MORTISE) 20-061 ICX 626 SC 1 Concealed Closer 268 CSP EN SA 1 Kick Plate (UL) K1050 4" B4E TORX CSK US32D RO 1 Armor Plate (UL) K1050 F 36" B4E TORX CSK US32D RO 1 Wall Stop 409 TORX US32D RO 1 Gasketing 290AV x Torx PE (FASTENERS TO BE INSTALLED 1" FROM ENDS AND AT 6" ON CENTER, MAXIMUM) 1 Edge Guard EG308 x HDWE PREP x AS - Torx 630 MR Set: 245.0 3 Hinge (heavy weight) T4A3786 NRP US26D MK 1 EM Mortise Lock (FSE-REX) L9092EUT OME/A RX 630 SC 1 Permanent Core 23-030 626 SC 1 Electric Strike (FSE) 1006CS 630 HS 1 Automatic Opener (PULL SIDE) 9531 HL/D STD ANCLR LC 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Wall Stop 409 US32D RO 1 Electromagnetic Holder 998 TRI-VOLT x SPACER 689 RF EXTENTION AS REQUIRED FOR PROPER INSTALLATION 1 Gasketing S773D PE 1 Electric Power Transfer EL-EPT SU 1 Wire Harness (THRU DOOR) CON-LENGTH AS REQUIRED VD 2 Wire Harness (POWER SUPPLY) CON-192 VD 2 Wire Harness (POWER SUPPLY EXTENSION) CON-6W VD 1 Position Switch DPS-W/M-CAS SU 1 Card Reader SUPPLIED BY DIVISION 28 OT 1 Touchless Actuator 8310-813 LC 1 Power Supply SUPPLIED BY DIVISION 28 OT




































jessicalmartinez

Permit Number Batch



Set: 246.0 2 Continuous Hinge HG305 (2) CTP AS 630 MR 2 Multi-Point Lock ELR LC 12 NB 55 707415 ETMO 106 US26D SA (UL-ELR-FSE-REX) 2 Permanent Core 23-030 626 SC 2 Cylinder (MORTISE) 20-061 ICX 626 SC 1 Concealed Overhead Stop 1-X36 630 RF 1 Automatic Opener (PUSH SIDE) 9553 HL/D LONG2 ANCLR LC 2 Armor Plate (UL) K1050 F 36" 4BE CSK US32D RO 1 Wall Stop 409 US32D RO 1 Gasketing S773D PE 1 Astragal S772D PE 2 Edge Guard EG308 x HDWE Prep x AS 630 MR 4 Electric Power Transfer EL-EPT SU 4 Wire Harness (THRU DOOR) CON-LENGTH AS REQUIRED VD 4 Wire Harness (POWER SUPPLY) CON-192 VD 4 Wire Harness (POWER SUPPLY EXTENSION) CON-6W VD 2 Position Switch DPS-W/M-CAS SU 1 Card Reader SUPPLIED BY DIVISION 28 OT 1 Touchless Actuator 8310-813 LC 1 Power Supply SUPPLIED BY DIVISION 28 OT Set: 247.0 2 Continuous Hinge FM300 CTP 630 MR 2 Multi-Point Lock ELR LC 12 NB 701315 ETMO 106 US26D SA (UL-CLASSROOM-ELR-FSE) 3 Permanent Core 23-030 626 SC 3 Cylinder (MORTISE) 20-061 ICX 626 SC 2 Concealed Overhead Stop 1-X36 630 RF 1 Automatic Opener (PULL SIDE) 9553 HL/D REG2 ANCLR LC 2 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Gasketing S773D PE 1 Astragal S772D PE 2 Electric Power Transfer EL-EPT SU 2 Wire Harness (THRU DOOR) CON-LENGTH AS REQUIRED VD 2 Wire Harness (POWER SUPPLY) CON-192 VD 2 Wire Harness (POWER SUPPLY EXTENSION) CON-6W VD 1 Keyswitch MKA SU 2 Touchless Actuator 8310-813 LC 1 Power Supply SUPPLIED BY DIVISION 28 OT Set: 248.0 2 Continuous Hinge FM300 630 MR 2 Exit Device 9847/9847WDC-L-BE-F 996L-BE US32D VD (CVR-UL-PASSAGE) -16 LBR





































jessicalmartinez

Permit Number Batch



1 Concealed Overhead Stop 1-X36 630 RF 2 Door Closer (Push Side) PR7500 689 NO 2 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Wall Stop 409 US32D RO 1 Gasketing S773D PE 1 Astragal S772D PE Set: 249.0 2 Continuous Hinge FM300 CTP 630 MR 2 Multi-Point Lock (UL-FSE-REX) LC 12 NB 55 707415 ETMO 106 US26D SA 2 Permanent Core 23-030 626 SC 2 Cylinder (MORTISE) 20-061 ICX 626 SC 2 Door Closer (Pull Side) 7500 689 NO 2 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 2 Wall Stop 409 US32D RO 1 Gasketing S773D PE 1 Astragal S772D PE 2 Electric Power Transfer EL-EPT SU 2 Wire Harness (THRU DOOR) CON-LENGTH AS REQUIRED VD 2 Wire Harness (POWER SUPPLY) CON-192 VD 2 Wire Harness (POWER SUPPLY EXTENSION) CON-6W VD 2 Position Switch DPS-W/M-CAS SU 1 Card Reader SUPPLIED BY DIVISION 28 OT 1 Power Supply SUPPLIED BY DIVISION 28 OT Set: 250.0 CD-026 1 Pivot Set 147 626 RF 1 Intermediate Pivot M19 626 RF 1 EM Exit Device LD RX QEL 35A-NL-OP CON US32D VD (RIM-LD-QEL-REX-FSE) 1 Cylinder (RIM) 20-057 ICX 626 SC 1 Permanent Core 23-030 626 SC 1 Pull (GROOVE-OFFSET) RM3131 Mtg-Type 6HD MP US32D RO (COORDINATE LENGTH & CTC W/ARCHITECT) 1 Threshold 272A MSES25SS PE (VERIFY FLOOR CONDITION) 1 Rain Guard 346C PE 1 Position Switch DPS-W/M-CAS SU 1 Card Reader SUPPLIED BY DIVISION 28 OT 1 Power Supply PS914 900-4RL-FA VD 1 Balance of Hardware SUPPLIED BY DOOR MFG/SUPPLIER OT 1 Auto Operator SUPPLIED BY DOOR MFG/SUPPLIER OT Notes: Power operated with Int/Ext TOs on timer. To being secured after hours. Exterior mounted on pedestal and interior on column wrap or vertical mullion jamb (NBBJ to provide locations) Note: for Auto operators on mullions and pedestal require double gang box. Veca will rough in double gang































jessicalmartinez

Permit Number Batch



boxers for WG&G TOs Card Reader for after hour usage Set: 250.1 CD-026 1 EM Exit Device LD QEL RX 3547A-EO CON US26D VD (CVR-LD-QEL-REX) 1 EM Exit Device LD QEL RX 3547A-NL-OP CON US26D VD (CVR-LD-QEL-REX-FSE) 1 Cylinder (RIM) 20-057 ICX 626 SC 1 Permanent Core 23-030 626 SC 2 Pull (GROOVE-OFFSET) RM3131 Mtg-Type 6HD MP US32D RO (COORDINATE LENGTH & CTC W/ARCHITECT) 1 Threshold 272A MSES25SS PE (VERIFY FLOOR CONDITION) 1 Rain Guard 346C PE 2 Position Switch DPS-W/M-CAS SU 1 Card Reader SUPPLIED BY DIVISION 28 OT 1 Power Supply PS914 900-4RL-FA VD 1 Balance of Hardware SUPPLIED BY DOOR MFG/SUPPLIER OT 1 Auto Operator SUPPLIED BY DOOR MFG/SUPPLIER OT Notes: Power operated with Int/Ext TOs on timer. To being secured after hours. Exterior mounted on pedestal and interior on column wrap or vertical mullion jamb (NBBJ to provide locations) Note: for Auto operators on mullions and pedestal require double gang box. Veca will rough in double gang boxers for WG&G TOs Card Reader for after hour usage Set: 251.0 CD-026 1 Push Bar RM3340 Mtg-Type 6HD US32D RO (COORDINATE CTC W/ARCHITECT) 1 Pull (GROOVE-STRAIGHT) RM3101 Mtg-Type 6HD MP US32D RO (COORDINATE LENGTH & CTC W/ARCHITECT) 1 Threshold 272A MSES25SS PE (VERIFY FLOOR CONDITION) 1 Balance of Hardware SUPPLIED BY DOOR MFG/SUPPLIER OT 1 Auto Operator SUPPLIED BY DOOR MFG/SUPPLIER OT Notes: Requires TOs on both sides mounted to mullions Set: 252.0 CD-026 1 EM Exit Device LD RX QEL 35A-NL-OP CON US32D VD












jessicalmartinez

Permit Number Batch



(RIM-LD-QEL-REX-FSE) 1 Cylinder (RIM) 20-057 ICX 626 SC 1 Permanent Core 23-030 626 SC 1 Pull (GROOVE-STRAIGHT) RM3101 Mtg-Type 6HD MP US32D RO (COORDINATE LENGTH & CTC W/ARCHITECT) 1 Threshold 272A MSES25SS PE (VERIFY FLOOR CONDITION) 1 Rain Guard 346C PE 1 Position Switch DPS-W/M-CAS SU 1 Card Reader SUPPLIED BY DIVISION 28 OT 1 Power Supply PS914 900-4RL VD 1 Balance of Hardware SUPPLIED BY DOOR MFG/SUPPLIER OT 1 Auto Operator SUPPLIED BY DOOR MFG/SUPPLIER OT Notes: Add TO on Int/Ext. Int. mounted to mullion. Ext. mounted to pedestal Set: 253.0 CD-026 Doors: 2.900.2, 3.901.1, 3.902.3 2 Pull (GROOVE-OFFSET) RM3131 Mtg-Type 6HD MP US32D RO (COORDINATE LENGTH & CTC W/ARCHITECT) 2 Push Bar RM3340 Mtg-Type 6HD US32D RO (COORDINATE CTC W/ARCHITECT) 1 Threshold 272A MSES25SS PE (VERIFY FLOOR CONDITION) 1 Circuits SUPPLIED BY DIVISION 28 OT 1 Balance of Hardware SUPPLIED BY DOOR MFG/SUPPLIER OT 1 Auto Operator SUPPLIED BY DOOR MFG/SUPPLIER OT Notes: Requires TOs on both sides mounted to mullions Set: 254.0 CD-026 Doors: 3.901.2 1 EM Exit Device LD QEL RX 3547A-EO CON US26D VD (CVR-LD-QEL-REX) 1 EM Exit Device LD QEL RX 3547A-NL-OP CON US26D VD (CVR-LD-QEL-REX-FSE) 1 Cylinder (RIM) 20-057 ICX 626 SC 1 Permanent Core 23-030 626 SC 2 Pull (GROOVE-OFFSET) RM3131 Mtg-Type 6HD MP US32D RO (COORDINATE LENGTH & CTC W/ARCHITECT) 1 Threshold 256x6AFG MSES25SS-2 PE 1 Rain Guard 346C PE 1 Position Switch DPS-W/M-CAS SU 1 Power Supply PS914 900-4RL-FA VD 1 Balance of Hardware SUPPLIED BY DOOR MFG/SUPPLIER OT 1 Auto Operator SUPPLIED BY DOOR MFG/SUPPLIER OT

















jessicalmartinez

Permit Number Batch



Notes: Add TO on Int/Ext. Int. mounted to mullion. Ext. mounted to pedestal Set: 254.1 Doors: 3.901.3 1 EM Exit Device LD QEL RX 35A-NL-OP CON US26D VD (CVR-LD-QEL-REX-FSE) 1 Cylinder (RIM) 20-057 ICX 626 SC 1 Permanent Core 23-030 626 SC 1 Pull (GROOVE-OFFSET) RM3131 Mtg-Type 6HD MP US32D RO (COORDINATE LENGTH & CTC W/ARCHITECT) 1 Threshold 256x6AFG MSES25SS-2 PE 1 Rain Guard 346C PE 1 Position Switch DPS-W/M-CAS SU 1 Power Supply PS914 900-4RL-FA VD 1 Balance of Hardware SUPPLIED BY DOOR MFG/SUPPLIER OT 1 Auto Operator SUPPLIED BY DOOR MFG/SUPPLIER OT 2 Card Readers SUPPLIED BY DIVISION 28 (By Security) OT Notes: Add TO on Int/Ext. Int. mounted to mullion. Ext. mounted to pedestal Card readers both sides for entry and exit after hours. Set: 255.0 3 Hinge (heavy weight) T4A3786 US26D MK 1 Mortise Lock (PASSAGE) L9010 OME/A 630 SC 1 Door Closer (Push Side w/Stop Arm) CLP7500 689 NO 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO Set: 256.0 6 Hinge (heavy weight) T4A3786 NRP US26D MK 1 Dust Proof Strike 570 US26D RO 1 Flush Bolt 2845/2945 US26D RO 1 Mortise Lock (PASSAGE) L9010 OME/A 630 SC 1 Door Closer PR7500 DA 689 NO 2 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 2 Wall Stop 409 US32D RO 1 Gasketing S773D PE 1 Astragal S772D PE Set: 257.0 2 Continuous Hinge HG305 CTP x AS 630 MR 2 Multi-Point Lock ELR LC 12 NB 701315 ETMO 106 US26D SA (UL-CLASSROOM-ELR-FSE) 2 Permanent Core 23-030 626 SC 2 Cylinder (MORTISE) 20-061 ICX 626 SC 1 Concealed Overhead Stop 1-X36 630 RF

























jessicalmartinez

Permit Number Batch



1 Automatic Opener (PULL SIDE) 9553 HL/D REG2 ANCLR LC 2 Mop Plate (UL) K1050 F 4" 4BE CSK US32D RO 2 Armor Plate (UL) K1050 F 36" 4BE CSK US32D RO 1 Wall Stop 409 US32D RO 1 Gasketing S773D PE 1 Astragal S772D PE 2 Edge Guard EG308 x HDWE Prep x AS 630 MR 2 Electric Power Transfer EL-EPT SU 2 Wire Harness (THRU DOOR) CON-LENGTH AS REQUIRED VD 2 Wire Harness (POWER SUPPLY) CON-192 VD 2 Wire Harness (POWER SUPPLY EXTENSION) CON-6W VD 2 Touchless Actuator 8310-813 LC 1 Power Supply SUPPLIED BY DIVISION 28 OT Set: 258.0 2 Continuous Hinge HG305 CTP x AS 630 MR 2 Multi-Point Lock ELR LC 12 NB 701315 ETMO 106 US26D SA (UL-CLASSROOM-ELR-FSE) 3 Permanent Core 23-030 626 SC 3 Cylinder (MORTISE) 20-061 ICX 626 SC 1 Automatic Opener (PULL SIDE) 9553 HL/D REG2 ANCLR LC 2 Armor Plate (UL) K1050 F 36" 4BE CSK US32D RO 2 Electromagnetic Holder 998 TRI-VOLT x SPACER 689 RF EXTENTION AS REQUIRED FOR PROPER INSTALLATION 1 Gasketing S773D PE 1 Astragal S772D PE 2 Edge Guard EG308 x HDWE Prep x AS 630 MR 2 Electric Power Transfer EL-EPT SU 2 Wire Harness (THRU DOOR) CON-LENGTH AS REQUIRED VD 2 Wire Harness (POWER SUPPLY) CON-192 VD 2 Wire Harness (POWER SUPPLY EXTENSION) CON-6W VD Keyswitch MKA SU 2 Touchless Actuator 8310-813 LC 1 Power Supply SUPPLIED BY DIVISION 28 OT Set: 259.0 1 Continuous Hinge HG305 x AS 630 MR 1 Mortise Lock (STOREROOM) L9080T OME/A 630 SC 1 Permanent Core 23-030 626 SC 1 Door Closer (Pull Side - DEL) 7500 DA 689 NO 1 Mop Plate (UL) K1050 F 4" 4BE CSK US32D RO 1 Armor Plate (UL) K1050 F 36" 4BE CSK US32D RO 1 Wall Stop 409 US32D RO 1 Gasketing S773D PE 1 Edge Guard EG308 x HDWE Prep x AS 630 MR Set: 260.0








































jessicalmartinez

Permit Number Batch



1 Continuous Hinge HG305 x AS 630 MR 1 Mortise Lock (STOREROOM) L9080T OME/A 630 SC 1 Permanent Core 23-030 626 SC 1 Surface Overhead Stop 10-X36 630 RF 1 Door Closer (Pull Side - DEL) 7500 DA 689 NO 1 Mop Plate (UL) K1050 F 4" 4BE CSK US32D RO 1 Armor Plate (UL) K1050 F 36" 4BE CSK US32D RO 1 Gasketing S773D PE 1 Edge Guard EG308 x HDWE Prep x AS 630 MR Set: 261.0 1 Continuous Hinge HG305 x AS 630 MR 1 Mortise Lock (CLASSROOM) L9070 T OME/A 630 SC 2 Permanent Core 23-030 626 SC 2 Cylinder (MORTISE) 20-061 ICX 626 SC 1 Surface Overhead Stop 10-X36 630 RF 1 Automatic Opener (PULL SIDE) 9531 HL/D STD ANCLR LC 1 Mop Plate (UL) K1050 F 4" 4BE CSK US32D RO 1 Armor Plate (UL) K1050 F 36" 4BE CSK US32D RO 1 Gasketing S773D PE 1 Edge Guard EG308 x HDWE Prep x AS 630 MR 1 Wire Harness VON DUPRIN CON-192 SC 1 Wire Harness (POWER SUPPLY EXTENSION) CON-6W VD 1 Keyswitch MKA SU 1 Touchless Actuator 8310-813 LC 1 Power Supply SUPPLIED BY DIVISION 28 OT Set: 262.0 2 Continuous Hinge FM300 630 MR 1 Dust Proof Strike 570 US26D RO 1 Flush Bolt 2842/2942 US32D RO 1 Mortise Lock L9070 T OME/A L283-722 630 SC (CLASSROOM x IND) 1 Permanent Core 23-030 626 SC 1 Coordinator 2600 SERIES x WEAR PLATES US28 RO 2 Mounting Bracket 2601AB/C US28 RO 2 Concealed Overhead Stop 1-X36 630 RF 2 Door Closer PR7500H 689 NO (Push Side w/Hold Open) 2 Armor Plate (UL) K1050 F 36" 4BE CSK US32D RO 1 Gasketing S773D PE 1 Astragal 357SS x S88D PE 2 Edge Guard EG308 x HDWE Prep x AS 630 MR Set: 263.0





































jessicalmartinez

Permit Number Batch



2 Continuous Hinge FM300 630 MR 2 Exit Device 9847/9847WDC-L-BE-F 996L-BE US32D VD (CVR-UL-PASSAGE) -16 LBR 2 Concealed Overhead Stop 1-X36 630 RF 2 Door Closer (Push Side) PR7500 689 NO 2 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 2 Electromagnetic Holder 998 TRI-VOLT x SPACER 689 RF EXTENTION AS REQUIRED FOR PROPER INSTALLATION 1 Gasketing S773D PE 2 Door Bottom 411APKL/420APKL PE 1 Astragal S772D PE Set: 264.0 3 Hinge (heavy weight) T4A3786 US26D MK 1 Fire Rated Mortise Exit 9875L-BE-F 996L-BE US32D VD 1 Door Closer (Pull Side) 7500 689 NO 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Wall Stop 409 US32D RO 1 Gasketing (PERFORATED) P773D PE 1 Door Bottom 411APKL/420APKL PE 1 Position Switch DPS-W/M-CAS SU 1 Card Reader SUPPLIED BY DIVISION 28 OT Set: 265.0 3 Hinge (heavy weight) T4A3786 NRP US26D MK 1 Mortise Lock (STOREROOM) L9080T OME/A 630 SC 1 Permanent Core 23-030 626 SC 1 Door Closer (Push Side w/Stop Arm) CLP7500 689 NO 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Gasketing S88D PE Set: 266.0 3 Hinge (heavy weight) T4A3786 NRP US26D MK 1 Mortise Lock (CLASSROOM) L9070 T OME/A 630 SC 1 Permanent Core 23-030 626 SC 1 Door Closer (Pull Side) 7500 689 NO 1 Wall Stop 409 US32D RO 1 Gasketing S773D PE Set: 267.0 3 Hinge (heavy weight) T4A3786 US26D MK 1 Mortise Lock (STOREROOM) L9080T OME/A 630 SC 1 Permanent Core 23-030 626 SC 1 Door Closer (Pull Side) 7500 689 NO 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO



































jessicalmartinez

Permit Number Batch



1 Wall Stop 409 US32D RO 1 Gasketing S773D PE Notes: Omit Kickplate at 3.205.1 Set: 268.0 2 Continuous Hinge HG305 CTP x AS 630 MR 2 Multi-Point Lock ELR LC 12 NB 701315 ETMO 106 US26D SA (UL-CLASSROOM-ELR-FSE) 3 Permanent Core 23-030 626 SC 3 Cylinder (MORTISE) 20-061 ICX 626 SC 1 Concealed Overhead Stop 1-X36 630 RF 1 Door Closer (Pull Side) 7500 689 NO 1 Automatic Opener (PULL SIDE) 9553 HL/D REG2 ANCLR LC 2 Mop Plate (UL) K1050 F 4" 4BE CSK US32D RO 2 Armor Plate (UL) K1050 F 36" 4BE CSK US32D RO 1 Wall Stop 409 US32D RO 1 Gasketing S773D PE 1 Astragal S772D PE 2 Edge Guard EG308 x HDWE Prep x AS 630 MR 2 Electric Power Transfer EL-EPT SU 2 Wire Harness (THRU DOOR) CON-LENGTH AS REQUIRED VD 2 Wire Harness (POWER SUPPLY) CON-192 VD 2 Wire Harness (POWER SUPPLY EXTENSION) CON-6W VD 1 Keyswitch MKA SU 2 Touchless Actuator 8310-813 LC 1 Power Supply SUPPLIED BY DIVISION 28 OT Set: 269.0 2 Continuous Hinge FM300 630 MR 2 Exit Device (CVR-UL) 9847/9847WDC-EO-F LBR US32D VD 2 Concealed Overhead Stop 1-X36 630 RF 2 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 2 Electromagnetic Holder 998 TRI-VOLT x SPACER 689 RF EXTENTION AS REQUIRED FOR PROPER INSTALLATION 1 Gasketing S773D PE 2 Door Bottom 411APKL/420APKL PE 1 Astragal S772D PE Set: 270.0 6 Hinge (heavy weight) T4A3786 NRP US26D MK 1 Auto Flush Bolt 2848 US32D RO 1 Multi Point Lock LC 12 NB 700606 ETMO US26D SA (UL-Lock Both Sides) 2 Permanent Core 23-030 626 SC 2 Cylinder (MORTISE) 20-061 ICX 626 SC



































jessicalmartinez

Permit Number Batch



1 Coordinator 2600 Series x FB x Mtg. Brkt. 628 RO 2 Door Closer (Push Side) PR7500 689 NO 2 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 2 Electromagnetic Holder 998 TRI-VOLT x SPACER 689 RF EXTENTION AS REQUIRED FOR PROPER INSTALLATION 1 Gasketing S773D PE 1 Astragal As Required By HM Door Mfr. Set: 271.0 1 Continuous Hinge HG305 CTP x AS 630 MR 1 EM Mortise Lock (FSE-REX) L9092EUT OME/A RX 630 SC 1 Permanent Core 23-030 626 SC 1 Surface Overhead Stop 10-X36 630 RF 1 Door Closer (Pull Side - DEL) 7500 DA 689 NO 1 Mop Plate (UL) K1050 F 4" 4BE CSK US32D RO 1 Armor Plate (UL) K1050 F 36" 4BE CSK US32D RO 1 Gasketing S773D PE 1 Edge Guard EG308 x HDWE Prep x AS 630 MR 1 Electric Power Transfer EL-EPT SU 1 Wire Harness (THRU DOOR) CON-LENGTH AS REQUIRED VD 1 Wire Harness (POWER SUPPLY) CON-192 VD 1 Wire Harness (POWER SUPPLY EXTENSION) CON-6W VD 1 Position Switch DPS-W/M-CAS SU 1 Card Reader SUPPLIED BY DIVISION 28 OT 1 Key Switch - Reset Local Alarm SUPPLIED BY DIVISION 28) OT Set: 272.0 1 Continuous Hinge HG305 x AS 630 MR 1 Mortise Lock (PASSAGE) L9010 OME/A 630 SC 1 Magnetic Lock M62B SU 1 Permanent Core 23-030 626 SC 1 Cylinder (MORTISE) 20-061 ICX 626 SC 1 Surface Overhead Stop 10-X36 630 RF 1 Door Closer (Pull Side) 7500 689 NO 1 Mop Plate (UL) K1050 F 4" 4BE CSK US32D RO 1 Armor Plate (UL) K1050 F 36" 4BE CSK US32D RO 1 Gasketing S773D PE 1 Edge Guard EG308 x HDWE Prep x AS 630 MR 1 Relay RB-4-24 SU 1 Position Switch DPS-W/M-CAS SU 1 Keyswitch MKA SU 1 Power Supply BPS-24-1 SU 1 Battery Backup B-24-5 SU Notes: Doors 1.332.2 and 1.332 are interlocking with doors normally unlocked. Key switch for emergency override. Opening 1.332.2 will lock down door 1.332. Once door 1.332.2 is secured, door 1.332 can be opened.




































jessicalmartinez

Permit Number Batch



Set: 273.0 1 Continuous Hinge HG305 x AS 630 MR 1 Mortise Lock (PASSAGE) L9010 OME/A 630 SC 1 Magnetic Lock M62B SU 1 Door Closer (Pull Side) 7500 689 NO 1 Mop Plate (UL) K1050 F 4" 4BE CSK US32D RO 1 Armor Plate (UL) K1050 F 36" 4BE CSK US32D RO 1 Wall Stop 409 US32D RO 1 Gasketing S773D PE 1 Edge Guard EG308 x HDWE Prep x AS 630 MR 1 Position Switch DPS-W/M-CAS SU Notes: 1. Doors 1.332 and 1.332.2 are interlocking with doors normally unlocked. Opening 1.332 will lock down door 1.332.2. Once door 1.332 is secured, door 1.332.2 can be opened. 2. Power supply, battery, relay board and key switch for interlocking system specified in HW Set 272.0 Set: 274.0 2 Continuous Hinge HG305 CTP x AS 630 MR 2 EM Exit Device QEL 9847/9847WDC-EO-F LBR CON US32D VD (CVR-UL-QEL-FSE-NO REX) 1 Automatic Opener 9560 HL/D DOUBLE EGRESS ANCLR LC (DOUBLE EGRESS) 2 Wall Stop 409 US32D RO 1 Gasketing S773D PE 1 Astragal S772D PE 2 Edge Guard EG308 x HDWE Prep x AS 630 MR 2 Electric Power Transfer EL-EPT SU 2 Wire Harness VON DUPRIN CON-192 SC 2 Wire Harness VON DUPRIN CON-6 VD 2 Wire Harness (POWER SUPPLY EXTENSION) CON-6W VD 3 Touchless Actuator 8310-813 LC 1 Power Supply PS914 900-4RL-FA VD Set: 275.0 2 Continuous Hinge HG305 CTP x AS 630 MR 2 Fire Rated Conc Vert Rod QEL 9847WDC-L-BE-F LBR 996L-BE CON US32D VD 1 Automatic Opener (PUSH SIDE) 9553 HL/D LONG2 ANCLR LC 2 Armor Plate (UL) K1050 F 36" 4BE CSK US32D RO 2 Wall Stop 409 US32D RO 1 Gasketing S773D PE 1 Astragal S772D PE 2 Edge Guard EG308 x HDWE Prep x AS 630 MR 2 Electric Power Transfer EL-EPT SU
































jessicalmartinez

Permit Number Batch



2 Wire Harness VON DUPRIN CON-192 SC 2 Wire Harness VON DUPRIN CON-6 VD 2 Wire Harness (POWER SUPPLY EXTENSION) CON-6W VD 3 Touchless Actuator 8310-813 LC 1 Power Supply PS914 900-4RL-FA VD Set: 276.0 2 Continuous Hinge HG305 CTP x AS 630 MR 2 EM Exit Device QEL 9847/9847WDC-L-BE 996L US32D VD (CVR-UL-QEL-PASSAGE) -BE-16 LBR CON 1 Automatic Opener (PUSH SIDE) 9553 HL/D LONG2 ANCLR LC 2 Armor Plate (UL) K1050 F 36" 4BE CSK US32D RO 2 Wall Stop 409 US32D RO 1 Gasketing S773D PE 1 Astragal S772D PE 2 Edge Guard EG308 x HDWE Prep x AS 630 MR 2 Electric Power Transfer EL-EPT SU 2 Wire Harness VON DUPRIN CON-192 SC 2 Wire Harness (THRU RAIL) CON-6 VD 2 Wire Harness (POWER SUPPLY EXTENSION) CON-6W VD 4 Touchless Actuator 8310-813 LC 1 Power Supply PS914 900-4RL-FA VD Set: 277.0 1 Pivot Set FL147 626 RF 1 Intermediate Pivot FML19 626 RF 1 Mortise Lock (Passage-Hospital Paddle) HL6-9010 L

(Coordinate Paddle MTG Position w/Architect) US32D GJ 1 Door Closer (Pull Side - LL) 7500 MLL 689 NO 1 Armor Plate (UL) K1050 F 36" 4BE CSK US32D RO 1 Wall Stop 409 US32D RO 1 Gasketing S773D PE 1 Edge Guard EG308 x HDWE Prep x AS 630 MR Set: 278.0 2 Continuous Hinge FM300 630 MR 2 Multi-Point Lock 12 NB 701515 ETMO US26D SA 2 Surface Overhead Stop 10-X36 630 RF 1 Door Closer 7210MPDO SERIES 689 NO (PULL SIDE - SLIDE ARM & TRACK - ELEC-HO-FAIL SAFE) 1 Door Closer 7210MPSO SERIES SLAVE UNIT 689 NO (PULL SIDE - SLIDE ARM & TRACK - ELEC-HO FAIL SAFE) 1 Gasketing S773D PE 1 Astragal S772D PE Set: 279.0
































jessicalmartinez

Permit Number Batch



3 Hinge (heavy weight) T4A3786 US26D MK 1 Mortise Lock (STOREROOM) L9080T OME/A 630 SC 1 Permanent Core 23-030 626 SC 1 Door Closer (Pull Side - DEL) 7500 DA 689 NO 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Wall Stop 409 US32D RO 1 Gasketing (PERFORATED) P773D PE 1 Door Bottom 411APKL/420APKL PE Set: 280.0 2 Continuous Hinge HG305 CTP x AS 630 MR 2 EM Exit Device QEL 9847/9847WDC-EO-F LBR CON US32D VD (CVR-UL-QEL-FSE-NO REX) 1 Automatic Opener 9560 HL/D DOUBLE EGRESS ANCLR LC (DOUBLE EGRESS) 2 Armor Plate (UL) K1050 F 36" 4BE CSK US32D RO 2 Wall Stop 409 US32D RO 1 Gasketing S773D PE 1 Astragal S772D PE 2 Edge Guard EG308 x HDWE Prep x AS 630 MR 2 Electric Power Transfer EL-EPT SU 2 Wire Harness VON DUPRIN CON-192 SC 2 Wire Harness VON DUPRIN CON-6 VD 2 Wire Harness (POWER SUPPLY EXTENSION) CON-6W VD 4 Touchless Actuator 8310-813 LC 1 Power Supply PS914 900-4RL-FA VD Set: 281.0 2 Continuous Hinge HG305 CTP x AS 630 MR 2 EM Exit Device QEL 9847/9847WDC-EO-F LBR CON US32D VD (CVR-UL-QEL-FSE-NO REX) 1 Concealed Overhead Stop 1-X36 630 RF 1 Automatic Opener 9560 HL/D DOUBLE EGRESS ANCLR LC (DOUBLE EGRESS) 2 Armor Plate (UL) K1050 F 36" 4BE CSK US32D RO 1 Wall Stop 409 US32D RO 1 Gasketing S773D PE 1 Astragal S772D PE 2 Edge Guard EG308 x HDWE Prep x AS 630 MR 2 Electric Power Transfer EL-EPT SU 2 Wire Harness VON DUPRIN CON-192 SC 2 Wire Harness VON DUPRIN CON-6 VD 2 Wire Harness (POWER SUPPLY EXTENSION) CON-6W VD 4 Touchless Actuator 8310-813 LC 1 Power Supply PS914 900-4RL-FA VD




































jessicalmartinez

Permit Number Batch



Set: 282.0 2 Continuous Hinge FM300 630 MR 2 Multi-Point Lock 12 NB 701515 ETMO US26D SA 2 Door Closer (Pull Side) 7500 689 NO 2 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 2 Electromagnetic Holder 998 TRI-VOLT x SPACER 689 RF EXTENTION AS REQUIRED FOR PROPER INSTALLATION 1 Gasketing S773D PE 1 Astragal S772D PE Set: 283.0 2 Continuous Hinge HG305 x AS 630 MR 2 Push Pull 111x73C/73CL US32D RO 1 Automatic Opener (PULL SIDE) 9553 HL/D REG2 ANCLR LC 2 Wall Stop 409 US32D RO 1 Gasketing S773D PE 1 Astragal S772D PE 2 Edge Guard EG308 x HDWE Prep x AS 630 MR 2 Touchless Actuator 8310-813 LC 1 Power Supply SUPPLIED BY DIVISION 28 OT Set: 284.0 2 Continuous Hinge HG305 x AS 630 MR 1 Dust Proof Strike 570 US26D RO 1 Flush Bolt 2842/2942 US32D RO 1 Mortise Lock HL6-9010 US32D GJ (Passage-Hospital Paddle) (Coordinate Paddle MTG Position w/Architect) 2 Concealed Overhead Stop 1-X36 630 RF 1 Gasketing S773D PE 1 Gasketing ACP112BL/2 PE 1 Gasketing S44D PE 2 Door Bottom 411APKL/420APKL PE 1 Astragal S772D PE Set: 285.0 2 Continuous Hinge HG305 x AS 630 MR 1 Dust Proof Strike 570 US26D RO 1 Flush Bolt 2842/2942 US32D RO 1 Mortise Lock HL6-9010 US32D GJ (Passage-Hospital Paddle) (Coordinate Paddle MTG Position w/Architect) 2 Wall Stop 409 US32D RO 1 Gasketing S773D PE 1 Gasketing ACP112BL/2 PE 1 Gasketing S44D PE

































jessicalmartinez

Permit Number Batch



2 Door Bottom 411APKL/420APKL PE 1 Astragal S772D PE Set: 286.0 3 Hinge (heavy weight) T4A3786 NRP US26D MK 1 EM Exit Device RX QEL9875L-F E996L-16 FS CON US32D VD (MORTISE-UL-SAF-QEL-REX) 1 Permanent Core 23-030 626 SC 1 Cylinder (MORTISE) 20-061 ICX 626 SC 1 Concealed Overhead Stop 1-X36 630 RF 1 Door Closer 7220/7230 MPDO SERIES 689 NO (PUSH SIDE - DBL LEVER ARM - ELEC-HO-FAIL SAFE) 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Gasketing S88D PE 1 Electric Power Transfer EL-EPT SU 1 Wire Harness VON DUPRIN CON-192 SC 1 Wire Harness VON DUPRIN CON-6 VD 1 Wire Harness (POWER SUPPLY EXTENSION) CON-6W VD 1 Position Switch DPS-W/M-CAS SU 1 Card Reader SUPPLIED BY DIVISION 28 OT 1 Power Supply SUPPLIED BY DIVISION 28 OT Set: 287.0 1 Pivot Set 147 626 RF 2 Intermediate Pivot M19 626 RF 1 Rim Exit Device LD 35A-NL-OP 388(Std) US26D VD 1 Cylinder (RIM) 20-057 ICX 626 SC 2 Permanent Core 23-030 626 SC 1 Cylinder (MORTISE) 20-061 ICX 626 SC 1 Pull (GROOVE-STRAIGHT) RM3101 Mtg-Type 6HD MP US32D RO (COORDINATE LENGTH & CTC W/ARCHITECT) 1 Concealed Overhead Stop 1-X36 630 RF 1 Door Closer (Push Side TJ) J7500 689 NO 1 Threshold 271A MSES25SS PE (VERIFY FLOOR CONDITION) 1 Rain Guard 346C PE 1 Weatherstrip and Door Bottom System SUPPLIED BY DOOR MFG/SUPPLIER OT 1 Position Switch DPS-W/M-CAS SU 1 Key Switch - Reset Local Alarm SUPPLIED BY DIVISION 28) OT 1 Local Alarm/Annunciator SUPPLIED BY DIVISION 28 OT Set: 288.0 3 Hinge (heavy weight) T4A3786 US26D MK 1 Mortise Lock (PASSAGE) L9010 OME/A 630 SC 1 Concealed Overhead Stop 1-X36 630 RF






























jessicalmartinez

Permit Number Batch



1 Door Closer (Pull Side) 7500 689 NO 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Threshold 276A MSES25 PE (VERIFY FLOOR CONDITION) 1 Gasketing S88D PE 1 Sweep 315CN PE Set: 289.0 1 Continuous Hinge HG305 x AS 630 MR 1 Continuous Hinge HG305 CTP x AS 630 MR 2 Flush Bolt 555 US26D RO 1 Dust Proof Strike 570 US26D RO 1 EM Mortise Lock (FSE-REX) L9092EUT OME/A RX 630 SC 1 Permanent Core 23-030 626 SC 1 Concealed Overhead Stop 1-X36 630 RF 1 Door Closer (Pull Side - DEL) 7500 DA 689 NO 2 Mop Plate (UL) K1050 F 4" 4BE CSK US32D RO 2 Armor Plate (UL) K1050 F 36" 4BE CSK US32D RO 1 Wall Stop 409 US32D RO 1 Gasketing S773D PE 1 Astragal S772D PE 2 Edge Guard EG308 x HDWE 630 MR Prep x Cut to Length (top of edge guard in line with top of armor plate) x AS 1 Electric Power Transfer EL-EPT SU 1 Wire Harness VON DUPRIN CON-192 SC 1 Wire Harness (THRU DOOR) CON-LENGTH AS REQUIRED VD 1 Wire Harness (POWER SUPPLY EXTENSION) CON-6W VD 2 Position Switch DPS-W/M-CAS SU 1 Card Reader SUPPLIED BY DIVISION 28 OT 1 Power Supply SUPPLIED BY DIVISION 28 OT Set: 290.0 2 Continuous Hinge HG305 CTP x AS 630 MR 2 Fire Rated Conc Vert Rod QEL 9847WDC-L-BE-F LBR 996L-BE CON US32D VD 1 Automatic Opener (PUSH SIDE) 9553 HL/D LONG2 ANCLR LC 2 Armor Plate (UL) K1050 F 36" 4BE CSK US32D RO 2 Wall Stop 409 US32D RO 1 Gasketing S773D PE 1 Astragal S772D PE 2 Edge Guard EG308 x HDWE Prep x AS 630 MR 2 Electric Power Transfer EL-EPT SU 2 Wire Harness VON DUPRIN CON-192 SC 2 Wire Harness VON DUPRIN CON-6 VD 2 Wire Harness (POWER SUPPLY EXTENSION) CON-6W VD 4 Touchless Actuator 8310-813 LC 1 Power Supply PS914 900-4RL-FA VD






































jessicalmartinez

Permit Number Batch



Set: 291.0 1 Continuous Hinge HG305 CTP x AS 630 MR 1 EM Mortise Lock (STOREROOM-REX) L9080T OME/A RX 630 SC 1 Permanent Core 23-030 626 SC 1 Electric Strike (FSE) 1006CS 630 HS 1 Automatic Opener (PUSH SIDE) 9542 HL/D LONG ANCLR LC 1 Mop Plate (UL) K1050 F 4" 4BE CSK US32D RO 1 Armor Plate (UL) K1050 F 36" 4BE CSK US32D RO 1 Wall Stop 409 US32D RO 1 Gasketing S773D PE 1 Edge Guard EG308 x HDWE Prep x AS 630 MR 1 Electric Power Transfer EL-EPT SU 1 Wire Harness VON DUPRIN CON-192 SC 1 Wire Harness (THRU DOOR) CON-LENGTH AS REQUIRED VD 1 Wire Harness (POWER SUPPLY EXTENSION) CON-6W VD 1 Position Switch DPS-W/M-CAS SU 1 Card Reader SUPPLIED BY DIVISION 28 OT 1 Touchless Actuator 8310-813 LC 1 Power Supply SUPPLIED BY DIVISION 28 OT Set: 301.0 3 Hinge (heavy weight) T4A3786 US26D MK 1 Mortise Lock (CLASSROOM) L9070 T OME/A 630 SC 1 Permanent Core 23-030 626 SC 1 Door Closer (Pull Side) 7500 689 NO 1 Electromagnetic Holder 998 TRI-VOLT x SPACER 689 RF EXTENTION AS REQUIRED FOR PROPER INSTALLATION 1 Gasketing S773D PE Set: 301.1 3 Hinge TA2714 NRP US26D MK 1 Mortise Lock (STOREROOM) L9080T OME/A 630 SC 1 Permanent Core 23-030 626 SC 1 Concealed Overhead Stop 1-X36 630 RF 3 Silencer 608 RO Set: 302.0 3 Hinge (heavy weight) T4A3786 US26D MK 1 Exit Device (PASSAGE) LD 9875L-BE 996L-BE-16 US32D VD 1 Concealed Overhead Stop 1-X36 630 RF 1 Door Closer (Pull Side) 7500 689 NO 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Wall Stop 409 US32D RO 1 Threshold 276A MSES25SS PE (VERIFY FLOOR CONDITION)



































jessicalmartinez

Permit Number Batch



1 Gasketing S88D PE 1 Sweep 315CN PE Set: 303.0 3 Hinge TA2714 NRP US26D MK 1 Mortise Lock (STOREROOM) L9080T OME/A 630 SC 1 Permanent Core 23-030 626 SC 1 Door Closer (Push Side w/Stop Arm) CLP7500 689 NO 1 Kick Plate (UL) K1050 F 16" B4E TORX CSK US32D RO 1 Gasketing S773D PE Set: 304.0 3 Hinge TA2714 US26D MK 1 Mortise Lock (STOREROOM) L9080T OME/A 630 SC 1 Permanent Core 23-030 626 SC 1 Surface Overhead Stop 10-X36 630 RF 1 Door Closer (Pull Side) 7500 689 NO 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Gasketing S88D PE Set: 305.0 3 Hinge (heavy weight) T4A3786 US26D MK 1 Exit Device 9875L-BE-F 996L-BE-16 US32D VD (MORTISE-UL-PASSAGE) 1 Door Closer (Push Side) PR7500 689 NO 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Wall Stop 409 US32D RO 1 Gasketing S88D PE Set: 306.0 3 Hinge (heavy weight) T4A3786 US26D MK 1 Mortise Lock (PASSAGE) L9010 OME/A 630 SC 1 Concealed Overhead Stop 1-X36 630 RF 1 Door Closer (Push Side) PR7500 689 NO 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Wall Stop 409 US32D RO 1 Electromagnetic Holder 998 TRI-VOLT x SPACER 689 RF EXTENTION AS REQUIRED FOR PROPER INSTALLATION 1 Gasketing S88D PE Set: 307.0 6 Hinge (heavy weight) T4A3786 US26D MK































jessicalmartinez

Permit Number Batch



1 Dust Proof Strike 570 US26D RO 1 Flush Bolt 2845/2945 US26D RO 1 Mortise Lock (STOREROOM) L9080T OME/A 630 SC 1 Permanent Core 23-030 626 SC 1 Coordinator 2600 SERIES x WEAR PLATES US28 RO 2 Door Closer (Pull Side) 7500 689 NO 2 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 2 Wall Stop 409 US32D RO 1 Gasketing S773D PE 1 Astragal 357SS x S88D PE Set: 308.0 6 Hinge (heavy weight) T4A3786 US26D MK 1 Dust Proof Strike 570 US26D RO 1 Flush Bolt 2845/2945 US26D RO 1 Mortise Lock (STOREROOM) L9080T OME/A 630 SC 1 Permanent Core 23-030 626 SC 1 Coordinator 2600 SERIES x WEAR PLATES US28 RO 1 Surface Overhead Stop 10-X36 630 RF 2 Door Closer (Pull Side) 7500 689 NO 2 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Wall Stop 409 US32D RO 1 Gasketing S773D PE 1 Astragal S772D PE Set: 309.0 3 Hinge (heavy weight) T4A3786 US26D MK 1 Mortise Lock (PASSAGE) L9010 OME/A 630 SC 1 Door Closer (Push Side) PR7500 689 NO 1 Wall Stop 409 US32D RO 1 Electromagnetic Holder 998 TRI-VOLT x SPACER 689 RF EXTENTION AS REQUIRED FOR PROPER INSTALLATION 1 Gasketing S773D PE Set: 310.0 1 Continuous Hinge FM300 CTP 630 MR 1 Continuous Hinge FM300 630 MR 1 Dust Proof Strike 570 US26D RO 1 Flush Bolt 2845/2945 US26D RO 1 Mortise Exit Device LD RX 9875NL 990NL US32D VD 1 Permanent Core 23-030 626 SC 1 Cylinder (MORTISE) 20-061 ICX 626 SC 1 Coordinator 2600 SERIES x WEAR PLATES US28 RO 2 Concealed Overhead Stop 1-X36 630 RF 2 Door Closer PR7500 DA 689 NO 2 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO








































jessicalmartinez

Permit Number Batch



1 Threshold 2748A MSES25SS PE (VERIFY FLOOR CONDITION) 1 Rain Guard 346C PE 2 Gasketing 290AS (@ JAMBS) PE 1 Gasketing 2891AS (@ HEAD) PE 2 Door Bottom 216BDCFG PE 1 Astragal 357SS x S88D PE 1 Electric Power Transfer EL-EPT SU 1 Wire Harness (THRU DOOR) CON-LENGTH AS REQUIRED VD 1 Wire Harness (POWER SUPPLY) CON-192 VD 1 Wire Harness (POWER SUPPLY EXTENSION) CON-6W VD 2 Position Switch DPS-W/M-CAS SU 1 Power Supply SUPPLIED BY DIVISION 28 OT Set: 311.0 3 Hinge (heavy weight) T4A3786 NRP US26D MK 1 EM Mortise Lock (FSE-REX) L9092EUT OME/A RX 630 SC 1 Permanent Core 23-030 626 SC 1 Concealed Overhead Stop 1-X36 630 RF 1 Door Closer (Push Side) PR7500 689 NO 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Mop Plate (UL) K1050 F 4" 4BE CSK US32D RO 1 Gasketing S773D PE 1 Electric Power Transfer EL-EPT SU 1 Wire Harness (THRU DOOR) CON-LENGTH AS REQUIRED VD 1 Wire Harness (POWER SUPPLY) CON-192 VD 1 Wire Harness (POWER SUPPLY EXTENSION) CON-6W VD 1 Position Switch DPS-W/M-CAS SU 1 Card Reader SUPPLIED BY DIVISION 28 OT 1 Power Supply SUPPLIED BY DIVISION 28 OT Set: 312.0 3 Hinge (heavy weight) T4A3786 US26D MK 1 Mortise Lock (CLASSROOM) L9070 T OME/A 630 SC 1 Permanent Core 23-030 626 SC 1 Door Closer (Pull Side) 7500 689 NO 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Wall Stop 409 US32D RO 1 Electromagnetic Holder 998 TRI-VOLT x SPACER 689 RF EXTENTION AS REQUIRED FOR PROPER INSTALLATION 1 Gasketing S773D PE Set: 313.0 3 Hinge (heavy weight) T4A3786 US26D MK 1 Mortise Lock (CLASSROOM) L9070 T OME/A 630 SC 1 Permanent Core 23-030 626 SC






































jessicalmartinez

Permit Number Batch



1 Surface Overhead Stop 10-X36 630 RF 1 Door Closer 7210MPDO SERIES 689 NO (PULL SIDE - SLIDE ARM & TRACK - ELEC-HO-FAIL SAFE) 1 Gasketing S773D PE Set: 314.0 3 Hinge (heavy weight) T4A3786 US26D MK 1 Access Control Mort Lock AD-200-MS-70 KP 626 SH 1 Permanent Core 23-030 626 SC 1 Concealed Overhead Stop 1-X36 630 RF 1 Door Closer (Pull Side) 7500 689 NO 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Mop Plate (UL) K1050 F 4" 4BE CSK US32D RO 1 Gasketing S88D PE 1 Sweep 315CN PE Set: 315.0 2 Continuous Hinge FM300 630 MR 1 Dust Proof Strike 570 US26D RO 1 Flush Bolt 2842/2942 US32D RO 1 Mortise Lock (PASSAGE) L9010 OME/A 630 SC 1 Coordinator 2600 SERIES x WEAR PLATES US28 RO 2 Door Closer (Pull Side) 7500 689 NO 2 Wall Stop 409 US32D RO 2 Electromagnetic Holder 998 TRI-VOLT x SPACER 689 RF EXTENTION AS REQUIRED FOR PROPER INSTALLATION 1 Gasketing S773D PE 1 Astragal S772D PE Set: 316.0 2 Continuous Hinge HG305 CTP x AS 630 MR 2 EM Exit Device QEL 9847/9847WDC-EO-F LBR CON US32D VD (CVR-UL-QEL-FSE-NO REX) 1 Automatic Opener 9560 HL/D DOUBLE EGRESS ANCLR LC (DOUBLE EGRESS) 2 Armor Plate (UL) K1050 F 36" 4BE CSK US32D RO 2 Wall Stop 409 US32D RO 1 Gasketing S773D PE 1 Astragal S772D PE 2 Edge Guard Astragal LL EGT308 x HDWE Prep x Full Height x AS x LL 630 MR 2 Electric Power Transfer EL-EPT SU 2 Wire Harness (THRU RAIL) CON-6 VD 2 Wire Harness (POWER SUPPLY) CON-192 VD 2 Wire Harness (POWER SUPPLY EXTENSION) CON-6W VD 2 Position Switch DPS-W/M-CAS SU 2 Card Reader SUPPLIED BY DIVISION 28 OT




































jessicalmartinez

Permit Number Batch



1 Power Supply PS914 900-4RL-FA VD Set: 317.0 2 Continuous Hinge HG305 CTP x AS 630 MR 2 EM Exit Device RX QEL 9847/9847WDC-L-E996L US32D VD (CVR-UL-QEL-FSE-REX) -16 FSE LBR CON 2 Cylinder (RIM) 20-057 ICX 626 SC 2 Permanent Core 23-030 626 SC 2 Door Closer (Push Side) PR7500 689 NO 2 Armor Plate (UL) K1050 F 36" 4BE CSK US32D RO 2 Wall Stop 409 US32D RO 2 Electromagnetic Holder 998 TRI-VOLT x SPACER 689 RF EXTENTION AS REQUIRED FOR PROPER INSTALLATION 1 Gasketing S773D PE 1 Astragal S772D PE 2 Edge Guard Astragal LL EGT308 x HDWE Prep x Full Height x AS x LL 630 MR 2 Electric Power Transfer EL-EPT SU 2 Wire Harness (THRU RAIL) CON-6 VD 2 Wire Harness (POWER SUPPLY) CON-192 VD 2 Wire Harness (POWER SUPPLY EXTENSION) CON-6W VD 2 Position Switch DPS-W/M-CAS SU 1 Card Reader SUPPLIED BY DIVISION 28 OT Push Button PB4L-2 SU 1 Power Supply PS914 900-4RL-FA VD Set: 318.0 2 Continuous Hinge HG305 CTP x AS 630 MR 2 EM Exit Device QEL 9847/9847WDC-L-BE 996L US32D VD (CVR-UL-QEL-PASSAGE) -BE-16 LBR CON 2 Cylinder (RIM) 20-057 ICX 626 SC 2 Permanent Core 23-030 626 SC 1 Automatic Opener (PUSH SIDE) 9553 HL/D LONG2 ANCLR LC 2 Armor Plate (UL) K1050 F 36" 4BE CSK US32D RO 2 Wall Stop 409 US32D RO 1 Gasketing S773D PE 1 Astragal S772D PE 2 Edge Guard Astragal LL EGT308 x HDWE Prep x Full Height x AS x LL 630 MR 2 Electric Power Transfer EL-EPT SU 2 Wire Harness (THRU RAIL) CON-6 VD 2 Wire Harness (POWER SUPPLY) CON-192 VD 2 Wire Harness (POWER SUPPLY EXTENSION) CON-6W VD 2 Electric Power Transfer EL-EPT TORX SU 2 Position Switch DPS-W/M-CAS SU 2 Card Reader SUPPLIED BY DIVISION 28 OT 1 Safety Sensor Package Simultaneous Pair 8310-3891 LC 1 Power Supply PS914 900-4RL-FA VD






































jessicalmartinez

Permit Number Batch



Set: 319.0 2 Continuous Hinge HG305 CTP x AS 630 MR 2 EM Exit Device QEL 9847/9847WDC-L-BE 996L US32D VD (CVR-UL-QEL-PASSAGE) -BE-16 LBR CON 2 Permanent Core 23-030 626 SC 2 Cylinder (MORTISE) 20-061 ICX 626 SC 1 Automatic Opener (PUSH SIDE) 9553 HL/D LONG2 ANCLR LC 2 Armor Plate (UL) K1050 F 36" 4BE CSK US32D RO 2 Wall Stop 409 US32D RO 1 Gasketing S773D PE 1 Astragal S772D PE 2 Edge Guard Astragal LL EGT308 x HDWE Prep x Full Height x AS x LL 630 MR 2 Electric Power Transfer EL-EPT SU 2 Wire Harness (THRU RAIL) CON-6 VD 2 Wire Harness (POWER SUPPLY) CON-192 VD 2 Wire Harness (POWER SUPPLY EXTENSION) CON-6W VD 2 Position Switch DPS-W/M-CAS SU 2 Touchless Actuator 8310-813 LC 1 Safety Sensor Package Simultaneous Pair 8310-3891 LC 1 Power Supply PS914 900-4RL-FA VD Set: 320.0 2 Continuous Hinge HG305 CTP x AS 630 MR 2 Exit Device 9847/9847WDC-L-BE-F 996L-BE US32D VD (CVR-UL-PASSAGE) -16 LBR 2 Door Closer (Push Side) PR7500 689 NO 2 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 2 Wall Stop 409 US32D RO 2 Electromagnetic Holder 998 TRI-VOLT x SPACER 689 RF EXTENTION AS REQUIRED FOR PROPER INSTALLATION 1 Gasketing S773D PE 1 Astragal S772D PE 2 Electric Power Transfer EL-EPT SU 2 Wire Harness (THRU RAIL) CON-6 VD 2 Wire Harness (POWER SUPPLY) CON-192 VD 2 Wire Harness (POWER SUPPLY EXTENSION) CON-6W VD 2 Position Switch DPS-W/M-CAS SU 1 Card Reader SUPPLIED BY DIVISION 28 OT 2 Power Supply SUPPLIED BY DIVISION 28 OT 1 Local Alarm/Annunciator SUPPLIED BY DIVISION 28 OT Notes: CR at Passage 2.901.3 side Set: 321.0

































jessicalmartinez

Permit Number Batch



1 Pivot Set (CENTER HUNG) 370 626 RF 1 Mortise Lock (CLASSROOM) L9070 T OME/A 630 SC 1 Permanent Core 23-030 626 SC 1 Concealed Overhead Stop 1-X36 630 RF 1 Gasketing S773D PE Set: 322.0 6 Hinge (heavy weight) T4A3786 US26D MK 1 Dust Proof Strike 570 US26D RO 1 Flush Bolt 2842/2942 US32D RO 1 Mortise Deadlock L462 T 626 SC 2 Permanent Core 23-030 626 SC 2 Pull (GROOVE-OFFSET) RM3131 Mtg-Type 6HD MP US32D RO (COORDINATE LENGTH & CTC W/ARCHITECT) 2 Push Bar RM3340 Mtg-Type 6HD US32D RO (COORDINATE CTC W/ARCHITECT) 2 Door Closer (Push Side) PR7500 689 NO 2 Wall Stop 409 US32D RO 2 Electromagnetic Holder 998 TRI-VOLT x SPACER 689 RF EXTENTION AS REQUIRED FOR PROPER INSTALLATION 1 Gasketing S773D PE 1 Astragal S772D PE Set: 323.0 2 Continuous Hinge FM300 CTP AS 630 MR 2 EM Exit Device RX 9847/9847WDC-L-E996L-16 US32D SA (CVR-UL-FSE-REX) FSE LBR CON 2 Cylinder (RIM) 20-057 ICX 626 SC 2 Permanent Core 23-030 626 SC 1 Automatic Opener (PUSH SIDE) 9553 HL/D LONG2 ANCLR LC 2 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 2 Wall Stop 409 US32D RO 1 Gasketing S773D PE 1 Astragal S772D PE 2 Electric Power Transfer EL-EPT SU 2 Wire Harness (THRU RAIL) CON-6 VD 2 Wire Harness (POWER SUPPLY) CON-192 VD 2 Wire Harness (POWER SUPPLY EXTENSION) CON-6W VD 2 Position Switch DPS-W/M-CAS SU 1 Card Reader SUPPLIED BY DIVISION 28 OT 2 Touchless Actuator 8310-813 LC 1 Safety Sensor Package Simultaneous Pair 8310-3891 LC 1 Power Supply PS914 900-4RL-FA VD Set: 324.0 2 Continuous Hinge FM300 630 MR



































jessicalmartinez

Permit Number Batch



2 Exit Device 9847/9847WDC-L-BE-F 996L-BE US32D VD (CVR-UL-PASSAGE) -16 LBR 2 Door Closer (Push Side) PR7500 689 NO 2 Wall Stop 409 US32D RO 2 Electromagnetic Holder 998 TRI-VOLT x SPACER 689 RF EXTENTION AS REQUIRED FOR PROPER INSTALLATION 1 Gasketing S773D PE 1 Astragal S772D PE Set: 325.0 3 Hinge (heavy weight) T4A3786 US26D MK 1 Exit Device LD 9875L 996L-16 US32D VD (MORTISE-LD-CLASSROOM) 1 Permanent Core 23-030 626 SC 1 Cylinder (MORTISE) 20-061 ICX 626 SC 1 Concealed Overhead Stop 1-X36 630 RF 1 Door Closer (Push Side) PR7500 689 NO 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Gasketing S773D PE 1 Gasketing S44D PE 1 Door Bottom 411APKL/420APKL PE Set: 326.0 3 Hinge (heavy weight) T4A3786 US26D MK 1 Exit Device LD 9875L 996L-16 US32D VD (MORTISE-LD-CLASSROOM) 1 Permanent Core 23-030 626 SC 1 Cylinder (MORTISE) 20-061 ICX 626 SC 1 Concealed Overhead Stop 1-X36 630 RF 1 Door Closer (Pull Side) 7500 689 NO 1 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 1 Gasketing S773D PE 1 Gasketing S44D PE 1 Door Bottom 411APKL/420APKL PE Set: 327.0 1 Continuous Hinge HG305 x AS 630 MR 1 Exit Device (PASSAGE) LD 9875L-BE 996L-BE-16 US32D VD 1 Door Closer (Pull Side) 7500 689 NO 1 Mop Plate (UL) K1050 F 4" 4BE CSK US32D RO 1 Armor Plate (UL) K1050 F 36" 4BE CSK US32D RO 1 Wall Stop 409 US32D RO 1 Gasketing S773D PE Set: 328.0


































jessicalmartinez

Permit Number Batch



3 Hinge (heavy weight) T4A3786 US26D MK 1 EM Mortise Lock (FSE-REX) L9092EUT OME/A RX 630 SC 1 Permanent Core 23-030 626 SC 1 Door Closer (Pull Side) 7500 689 NO 1 Wall Stop 409 US32D RO 1 Gasketing S773D PE 1 Electric Power Transfer EL-EPT SU 1 Wire Harness (THRU RAIL) CON-6 VD 1 Wire Harness (POWER SUPPLY) CON-192 VD 1 Wire Harness (POWER SUPPLY EXTENSION) CON-6W VD 1 Position Switch DPS-W/M-CAS SU 1 Card Reader SUPPLIED BY DIVISION 28 OT 1 Power Supply SUPPLIED BY DIVISION 28 OT Set: 329.0 2 Continuous Hinge HG305 CTP x AS 630 MR 2 Multi-Point Lock LC NB 701315 ETMO US26D SA 2 Permanent Core 23-030 626 SC 2 Cylinder (MORTISE) 20-061 ICX 626 SC 1 Concealed Overhead Stop 1-X36 630 RF 2 Door Closer PR7500 DA 689 NO 2 Armor Plate (UL) K1050 F 36" 4BE CSK US32D RO 1 Wall Stop 409 US32D RO 1 Gasketing S773D PE 1 Astragal S772D PE 2 Edge Guard EG308 x HDWE Prep x AS 630 MR Set: 330.0 2 Continuous Hinge FM300 CTP 630 MR 2 Magnetic Lock M62B SU 1 Exit Device RX QEL 9847/9847WDC-EO-F LBR CON US32D VD (CVR-UL-QEL-REX-FSE) 1 Exit Device RX QEL 9847/9847WDC-EO-F LBR CON US32D VD (CVR-UL-QEL-SIGNAL-FSE) 2 Wall Stop 409 US32D RO 2 Electromagnetic Holder 998 TRI-VOLT x SPACER 689 RF EXTENTION AS REQUIRED FOR PROPER INSTALLATION 1 Gasketing S773D PE 1 Astragal S772D PE 2 Electric Power Transfer EL-EPT SU 2 Wire Harness (THRU RAIL) CON-6 VD 2 Wire Harness (POWER SUPPLY) CON-192 VD 2 Wire Harness (POWER SUPPLY EXTENSION) CON-6W VD 2 Position Switch DPS-W/M-CAS SU 1 Card Reader SUPPLIED BY DIVISION 28 OT 1 Touchless Actuator 8310-813 LC






































jessicalmartinez

Permit Number Batch



1 Power Supply PS914 900-4RL-FA VD 1 Emergency Release and/or Lock Down Button (Reception Desk) OT SUPPLIED BY DIVISION 28 Set: 331.0 2 Pivot Set L147 626 RF 2 Intermediate Pivot ML19 626 RF 1 Dust Proof Strike 570 US26D RO 2 Flush Bolt LL 2845/2945 x Lead Line Box US26D RO 1 Mortise Lock HL6-9010 US32D GJ (Passage-Hospital Paddle) (Coordinate Paddle MTG Position w/Architect) 1 Permanent Core 23-030 626 SC 1 Coordinator 2600 SERIES x WEAR PLATES US28 RO 2 Mounting Bracket 2601AB/C US28 RO 2 Concealed Overhead Stop - LL 1-X36 x Lead Line Channel 630 RF 2 Door Closer 7500H DA MLL 689 NO (Pull Side - DEL W/Hold Open LL) 4 Armor Plate (UL) K1050 F 36" 4BE CSK US32D RO 1 Gasketing S773D PE 1 Gasketing ACP112BL/2 PE 1 Gasketing S44D PE 2 Door Bottom 411APKL/420APKL x Lead Line Channel PE 1 Astragal S772D PE 1 Edge Guard Astragal LL EGT308 x HDWE Prep x Full Height x AS x LL 630 MR 1 Edge Guard EG308 x HDWE Prep x AS 630 MR Set: 332.0 Doors: 2.240.1 1 Continuous Hinge FM300 HT CTP TORX 630 MR 1 Behavioral Lock LC 8272-24V BHL US32D SA 2 Permanent Core 23-030 626 SC 2 Cylinder (MORTISE) 20-061 ICX 626 SC 1 Kick Plate (UL) K1050 F 16" B4E TORX CSK US32D RO 1 Wall Stop 409 TORX US32D RO 1 Gasketing 290AV x Torx PE (FASTENERS TO BE INSTALLED 1" FROM ENDS AND AT 6" ON CENTER, MAXIMUM) 1 Wire Harness (THRU DOOR) CON-LENGTH AS REQUIRED VD 1 Wire Harness (POWER SUPPLY) CON-192 VD 1 Wire Harness (POWER SUPPLY EXTENSION) CON-6W VD 1 Electric Power Transfer EL-EPT TORX SU 1 Position Switch DPS-W/M-CAS SU 1 Card Reader SUPPLIED BY DIVISION 28 OT 1 Power Supply SUPPLIED BY DIVISION 28 OT Notes: Door normally closed and locked with restricted egress at all times. Valid card read will momentarily unlock door. Door locks from both sides with loss of power.

































jessicalmartinez

Permit Number Batch



Set: 333.0 Doors: 2.240.3 1 Continuous Hinge FM300 HT CTP TORX 630 MR 1 Behavioral Lock LC 8272-24V BHL US32D SA 3 Permanent Core 23-030 626 SC 3 Cylinder (MORTISE) 20-061 ICX 626 SC 1 Door Closer (Pull Side) 7500 689 NO 1 Kick Plate (UL) K1050 F 16" B4E TORX CSK US32D RO 1 Wall Stop 409 TORX US32D RO 1 Gasketing 290AV x Torx PE (FASTENERS TO BE INSTALLED 1" FROM ENDS AND AT 6" ON CENTER, MAXIMUM) 1 Wire Harness (THRU DOOR) CON-LENGTH AS REQUIRED VD 1 Wire Harness (POWER SUPPLY) CON-192 VD 1 Wire Harness (POWER SUPPLY EXTENSION) CON-6W VD 1 Electric Power Transfer EL-EPT TORX SU 1 Position Switch DPS-W/M-CAS SU 1 Card Reader SUPPLIED BY DIVISION 28 OT 1 Keyswitch MKA SU 1 Power Supply SUPPLIED BY DIVISION 28 OT Notes: Door normally closed and locked with restricted egress at all times. Valid card read will momentarily unlock door. Door locks from both sides with loss of power. Keyswitch will disable the CR when BH TMT 5 and 6 are used as swing rooms Set: 334.0 3 Hinge (heavy weight) T4A3786 NRP US26D MK 1 Mortise Lock (CLASSROOM) L9070 T OME/A 630 SC 1 Permanent Core 23-030 626 SC 1 Door Closer 7210MPSO SERIES SLAVE UNIT 689 NO (PULL SIDE - SLIDE ARM & TRACK - ELEC-HO FAIL SAFE) 1 Wall Stop 409 US32D RO 1 Gasketing S773D PE Set: 335.00 2 Continuous Hinge FM300 CTP 630 MR 2 Multi-Point Lock LC 12 NB 701315 ETMO US26D SA (UL-CLASSROOM) 2 Permanent Core 23-030 626 SC 2 Cylinder (MORTISE) 20-061 ICX 626 SC 2 Door Closer (Pull Side) 7500 689 NO 2 Kickplate (UL) K1050 F 16" 4BE CSK US32D RO 2 Wall Stop 409 US32D RO 1 Electromagnetic Holder 998 TRI-VOLT x SPACER 689 RF EXTENTION AS REQUIRED FOR PROPER INSTALLATION 1 Gasketing S773D PE 1 Astragal S772D PE

































jessicalmartinez

Permit Number Batch



Set: 336.0 Door: 225 6 Hinge (heavy weight) T4A3386 4 ½” x 4 ½” US32D MK 1 Self Latching Top Bolt 2905 US26D RO 1 Mortise Lock HL6-9010 US32D GJ (Passage-Hospital Paddle) (Coordinate Paddle MTG Position w/Architect) 2 Mop Plate (UL) K1050 F 4" 4BE CSK US32D RO 2 Armor Plate (UL) K1050 F 36" 4BE CSK US32D RO 2 Edge Guard EG308 x HDWE Prep x AS 630 MR 2 Wall Stop 409 US32D RO 1 Gasketing S773D PE 1 Astragal S772D PE Set: 337.0 Door: 284C 6 Hinge (heavy weight) T4A3386 5” x 4 ½” NRP US32D MK 1 Electric Power Transfer EL-EPT SU 1 Fire Exit Device QEL9827EO-F LBR US32D VD 1 Fire Exit Device QEL9827L-F 996L x 16 LBR US32D VD 1 Cylinder 20-057T 626 SC 1 Astragal 18041CNB AL PE 1 Automatic Opener 9553 HL/D REG2 ANCLR LC 2 Armor Plate (UL) K1050 F 36" 4BE CSK US32D RO 2 Edge Guard EG308 x HDWE Prep x AS 630 MR 2 Wall Stop 409 US32D RO 1 Gasketing S773D PE 1 Card Reader By Security 1 Power Supply PS914 4RL 2Q-FA GRY 1 Actuator Wall Mount 8310-856T 1 Scanner Scan II-B Blk Notes: When door to be unlocked, access control by others will retract and hold latch bolts of exit device. Pushing outside Actuator will auto open doors. From push side motion sensor will auto open doors when doors to be locked, access control will release latch bolts and turn off outside push button. Showing card will retract latch bolt and turn on outside push button momentarily and if pushed will open doors. From push side motion sensor will retract latch bolts momentarily and auto open doors. Set: 500.0 1 Miscellaneous HW Set No Hardware OT Set: 700.0 3 Hardware TBD - FORTH COMING OT



https://us.allegion.com/content/dam/allegion-us-2/web-documents-2/DataSheet/Schlage_HL_Series_Data_Sheet_112205.pdf














jessicalmartinez

Permit Number Batch



END OF SECTION 087100

jessicalmartinez

Permit Number Batch