miller weldmaster – heat-sealing equipment for the production of tents

16
Miller Weldmaster – Heat-Sealing Equipment For the Production of Tents Miller Weldmaster manufactures a variety of equipment for the production of tents. Miller will also design a completely automated machine to fit your specific tent production needs. Miller Weldmaster will provide a complete tent welding solutions for the tent manufacture. Visit www.weldmaster.com and pick your industry for more Tent production equipment, and watch videos of these systems. Tent Industry www.weldmaster.com Miller Weldmaster Corporation . 330.833.6739 . 1.877.935.3627 . [email protected] . www.weldmaster.com The First Choice Globally of All Industrial Fabric Welding Solutions 1 The 112 Extreme™ is designed to weld long straight seams faster than any other technology in the industry! Available from 3 to 20m long! The T-500 is designed to weld all the seams needed to produce your tents! T-300 Extreme Flex™ For the Manufacturing of Tents The T-300 Extreme Flex™ will allow you to seam your panels together, hem the ends, and produce keder for tension sidewalls. The T-300 Extreme Flex™ has the capability of producing a complete tent from start to finish. T-300 Extreme Flex™ Seal Types: The T-300 Extreme Flex™ is designed to weld all the seams needed to produce your tents! 112 Extreme™ For the Manufacturing of Tents The 112 Extreme™ is the next generation of the popular 112 Cross Seamer. The 112 Extreme™ is the fastest seaming technology in the industry, able to weld long straight seams up to 55 ft../min. (17 m/min.) The 112 Extreme™ can not only seam you panels together but also weld keder to those panels. The 112 Extreme™ is also equipped with a laser-guided cutter to cut panels. 112 Extreme™ Seal Types: T-500 For the Manufacturing of Tents The T-500 will allow you to seam your panels together, hem the ends, and produce keder for tension sidewalls. The T-500 has the capability of producing a complete tent from start to finish. T-500 Seal Types: Keder Keder Keder Overlap Overlap Overlap Rope and Hem Rope and Hem Rope and Hem Pole Pocket Pole Pocket Pole Pocket Hem Hem Hem

Upload: driyarkara

Post on 09-Feb-2023

1 views

Category:

Documents


0 download

TRANSCRIPT

Miller Weldmaster – Heat-Sealing Equipment For the Production of TentsMiller Weldmaster manufactures a variety of equipment for the production of tents. Miller will also design a completely automated machine to fit your specific tent production needs. Miller Weldmaster will provide a complete tent welding solutions for the tent manufacture. Visit www.weldmaster.com and pick your industry for more Tent production equipment, and watch videos of these systems.

Tent Industry

www.weldmaster.com

Miller Weldmaster Corporation . 330.833.6739 . 1.877.935.3627 . [email protected] . www.weldmaster.com

The First Choice Globally of All Industrial Fabric Welding Solutions

1

The 112 Extreme™ is designed to weld long straight seams faster than any other technology in the industry!

Available from 3 to 20m long!

The T-500 is designed to weld all the seams needed to produce your tents!

T-300 Extreme Flex™ For the Manufacturing of Tents

The T-300 Extreme Flex™ will allow you to seam your panels together, hem the ends, and produce keder for tension sidewalls. The T-300 Extreme Flex™ has the capability of producing a complete tent from start to finish.

T-300 Extreme Flex™ Seal Types:

The T-300 Extreme Flex™ is designed to weld all the seams needed to produce your tents!

112 Extreme™ For the Manufacturing of Tents

The 112 Extreme™ is the next generation of the popular 112 Cross Seamer. The 112 Extreme™ is the fastest seaming technology in the industry, able to weld long straight seams up to 55 ft../min. (17 m/min.) The 112 Extreme™ can not only seam you panels together but also weld keder to those panels. The 112 Extreme™ is also equipped with a laser-guided cutter to cut panels.

112 Extreme™ Seal Types:

T-500 For the Manufacturing of Tents

The T-500 will allow you to seam your panels together, hem the ends, and produce keder for tension sidewalls. The T-500 has the capability of producing a complete tent from start to finish.

T-500 Seal Types:

Keder

Keder

Keder

Overlap

Overlap

Overlap

Rope and Hem

Rope and Hem

Rope and Hem

Pole Pocket

Pole Pocket

Pole Pocket

Hem

Hem

Hem

Miller Weldmaster – Heat-Sealing Equipment For the Production of TentsMiller Weldmaster manufactures a variety of equipment for the production of tents. Miller will also design a completely automated machine to fit your specific tent production needs. Miller Weldmaster will provide a complete tent welding solutions for the tent manufacture. Visit www.weldmaster.com and pick your industry for more Tent production equipment, and watch videos of these systems.

Tent Industry

www.weldmaster.com

Miller Weldmaster Corporation . 330.833.6739 . 1.877.935.3627 . [email protected] . www.weldmaster.com

The First Choice Globally of All Industrial Fabric Welding Solutions

2

M-100 Tent / Keder Seal Type:

Custom Equipment for High Production

M-100 Tent / Keder is a completely automated tent side wall production system.M-100 Tent / Keder

For the High Production Tent Maker

The M-100 is a completely automated production process. From overlaps and hems to grommets and keder, the M-100 will do all welding in one pass through the machine. The M-100 is also able to cut your panels to specified lengths. The M-100 will greatly increase production while decreasing labor costs.

Miller Weldmaster – Heat-Sealing Equipment For the Production of TarpaulinsMiller Weldmaster manufactures a variety of equipment for the production of tarpaulins / tarps, truck tarps, and covers. Miller will design a completely automated machine to fit your specific tarp production needs. Visit www.weldmaster.com and pick your industry for more Tarpaulin production equipment, and watch videos of these systems.

Tarpaulin Industry

www.weldmaster.com

Miller Weldmaster Corporation . 330.833.6739 . 1.877.935.3627 . [email protected] . www.weldmaster.com

The First Choice Globally of All Industrial Fabric Welding Solutions

1

The 112 Extreme™ is designed to weld long straight seams faster than any other technology in the industry!

Available from 3 to 20m long!

The T-500™ is designed to weld all the seams needed to produce your tarps and covers!

T-300 Extreme Flex™ For the Manufacturing of Tarps & Covers

The T-300 Extreme Flex™ combines versatility and precisely controlled operating parameters with an ergonomic design and interface for easy operation, speed, accuracy and productivity.

The T-300 Extreme Flex™ will easily allow you to seam your panels together, hem the ends faster than any other technology on the market.

T-300 Extreme Flex™ Seal Types:

The T-300 Extreme Flex™ is designed to weld all the seams needed to produce your tarpaulins with the fastest technology on the market!

112 Extreme™ For the Manufacturing of Tarpaulins

The 112 Extreme™ is the next generation of the popular 112 Cross Seamer. The 112 Extreme™ is the fastest seaming technology in the industry, able to weld long straight seams up to 55 ft../min. (17 m/min.) The 112 Extreme™ is able to weld keder to tarp panels for the production of truck tarpaulins and is also equipped with a laser-guided cutter to cut the panels.

112 Extreme™ Seal Types:

T-500™ For the Manufacturing of Tarpaulins

The T-500™ will easily allow you to seam your panels together, hem the ends faster than any other technology on the market. With its longer throat the T-500 will increase your production while decreasing fabric handling.

T-500 Seal Types:

Overlap

Overlap

Overlap

Rope and Hem

Rope and Hem

Rope and Hem

Pole Pocket

Pole Pocket

Pole PocketWebbing

Hem

Hem

Hem

Miller Weldmaster – Heat-Sealing Equipment For the Production of TarpaulinsMiller Weldmaster manufactures a variety of equipment for the production of tarpaulins / tarps, truck tarps, and covers. Miller will design a completely automated machine to fit your specific tarp production needs. Visit www.weldmaster.com and pick your industry for more Tarpaulin production equipment, and watch videos of these systems.

Tarpaulin Industry

www.weldmaster.com

Miller Weldmaster Corporation . 330.833.6739 . 1.877.935.3627 . [email protected] . www.weldmaster.com

The First Choice Globally of All Industrial Fabric Welding Solutions

2

M-100 Tarp Keder Seal Type:

M-100 Tarpaulin Seal Type:

112 (indexing) Truck Side Seal Type:

Custom Equipment for High Production

M-100 Tarp Keder is a completely automated tarpaulin production system.

M-100 Tarp Keder is a completely automated tarpaulin production system.

M-100 Tarp Keder Fully Automated Tarpaulin Manufacturing

The M-100 is a completely automated production process. This M-100 Tarp Keder pulls fabric off of two unwinds and welds an overlap while simultaneously creating and welding a two-sided keder to each edge of the finished panel. The M-100 is also able to cut your panels to specified lengths. The M-100 will greatly increase production while decreasing labor costs. M-100 systems are specifically designed to fit your individual production needs.

M-100 Tarpaulin Fully Automated Tarpaulin Manufacturing

The M-100 is a completely automated production process. This M-100 pulls fabric off of multiple rolls and welds up to 7 overlap seals and hems on both edges. This system also marks a perpendicular and lateral D-ring lay-out line and cuts to a desired length. The M-100 will greatly increase production while decreasing labor costs. M-100 systems are specifically designed to fit your individual production needs.

112 Truck Side Production Fully Automated Truck Tarpaulin Manufacturing

The 112 Indexing system is a completely automated production process. These fully automated systems are designed to dispense and weld webbing strips in pre-determined locations while indexing the panel to its next location.

112 Truck Side Production is a completely automated truck side tarp production system.

Miller Weldmaster – Finishing Equipment for the Sign Maker Miller Weldmaster manufactures a variety of equipment for the production of banners, billboards, and other printed materials. Miller will also design a completely automated machine to fit you specific production needs. Miller Weldmaster provides three finishing machines to fit the needs of any sign company!

Seamers for welding banners, billboards and other printed materials:

Sign Industry

www.weldmaster.com

Miller Weldmaster Corporation . 330.833.6739 . 1.877.935.3627 . [email protected] . www.weldmaster.com

Overlap Seal Hem with Pocket Hem with Rope Hem

112 Extreme™ For the Grand Format Printer

The 112 Extreme™ is the next generation of the popular 112 Cross Seamer. The 112 Extreme™ will weld pre-printed or printed media used by sign companies all over the world. The 112 Extreme™ is designed for the Grand and Large format printer. The 112 Extreme™ will produce the fastest seams in the industry! Our dual vacuum and high speed welding system ensures perfect print alignment at a pace to keep ahead of your printing.Creates all seams to produce:

The First Choice Globally of All Industrial Fabric Welding Solutions

The 112 Extreme™ is designed to weld hems, rope-in-hems, pockets, overlaps, backlit seams and many more!

The T-300 Extreme Edge™ is designed to weld high speed hems, pockets, and rope-in-hems seams for your banners!

1

Billboards•Banners•Fleet graphics•

Exhibition signage•Building wraps•Wall murals•

Backlits•Framing systems•Awning signs•

112 Extreme™ Seal Types: Available from 3 to 20m long! Backlit Seal

Overlap Seal Hem with Pocket Hem with Rope Hem Truck side beading

T-300 Extreme Edge™ For Large Banner Jobs

The T-300 Extreme Edge™ combines versatility and precisely controlled operating parameters with an ergonomic design and interface for easy operation, speed, accuracy and productivity.

The T-300 Edge™ comes set up for high speed hems, pockets and rope-in-hems to finish your ban-ners, signs and printed media.

Finishes the edges of all screen-printed and digitally printed products.•

Handles large and small jobs•

Will weld PVC and Polyethylene•

T-300 Extreme Edge™ Seal Types:

The 112 Extreme™ will weld PVC and PE

Sign Industry

www.weldmaster.com

Miller Weldmaster Corporation . 330.833.6739 . 1.877.935.3627 . [email protected] . www.weldmaster.com

Impulse Extreme™ For the Large Format Printer

The Impulse Extreme™ incorporates an effective thermo-impulse sealing technology with preci-sion controlled welding parameters that will create great looking seams.

Make big signs from narrow prints•Hems and pole pockets•Finish all jobs in-house•Priced for all sign shops•Now seaming digital textiles•

Impulse Extreme™ Seal Types:

Overlap Seal Hem with Pocket Hem with Rope Hem

The First Choice Globally of All Industrial Fabric Welding Solutions

The Impulse Extreme™ is designed to weld high speed hems, pockets and rope-in-hems for your banners!

2

M-100 Billboard Seal Type:

Double HemmerFor the High Production Sign Maker

The Double Hemmer machine can weld outside hems on banners, posters and billboards simultane-ously.

M-100 Banner Seal Type:

Double Hemmer Seal Type:

Custom Equipment for High ProductionM-100 Billboard finishes your boards in 2 minutes or less!!

M-100 Banner finishes your product in seconds!!

Double Hemmer finishes your product in seconds!!

M-100 Billboard For the High Production Sign Maker

The M-100 Billboard machine is capable of finishing all four sides of your billboards with current poster board in 2 minutes or less!The system can also finish large 14 feet x 48 feet billboards.

M-100 Banner For the High Production Sign Maker

The Banner machine can weld and grommet the outside edges of banners, hands free. This system uses cameras to detect grommet and cut locations.The Banner machine will finish a banner in seconds!

Miller Weldmaster – Heat-sealing equipment for the awnings and marine cover makers!Miller Weldmaster manufactures a variety of equipment for the production of acrylic/PVC awnings and marine covers. Miller will also design a completely automated machine to fit your specific production needs. Miller Weldmaster provides three machines to fit the needs of any awning/marine cover company!

Acrylic Industry

www.weldmaster.com

Miller Weldmaster Corporation . 330.833.6739 . 1.877.935.3627 . [email protected] . www.weldmaster.com

112 Extreme™ For acrylic/PVC awnings & marine covers

The 112 Extreme™ is the next generation of the popular 112 Cross Seamer. The 112 Extreme™ will weld acrylic and PVC fabrics. The 112 Extreme™ will produce the fastest seams in the industry! Our dual vacuum and high speed welding system ensures perfect seams at high production speeds.

Designed to be used with our Extreme Seam Tape™•Easy one man operation •Can weld both PVC and Acrylic fabrics•Fastest welding speeds in the industry•

The First Choice Globally of All Industrial Fabric Welding Solutions

The 112 Extreme™ is designed to weld hems, overlaps, and many more on acrylic/PVC awnings and marine covers!

1

112 Extreme™ Seal Types:

Available from 3 to 20m long!

The 112 Extreme™ will weld PVC and Acrylic fabrics

Overlap Seal Hem with Pocket Hem with Rope Hem Rafter Straps

Impulse Extreme™ £ For acrylic/PVC awnings & marine covers

The Impulse Extreme™ incorporates an effective thermo-impulse sealing technology with preci-sion controlled welding parameters that will create great looking seams.

Designed to be used with our Extreme Seam Tape™•Easy one man operation •Can weld both PVC and Acrylic fabrics•

Impulse Extreme™ Seal Types:

Overlap Seal Hem with Pocket Rafter Straps Hem

The Impulse Extreme™ is designed to easily weld hems, and overlaps for your acrylic/PVC awnings and Marine covers!

Miller Weldmaster – Heat-sealing equipment for the awnings and marine cover makers!Miller Weldmaster manufactures a variety of equipment for the production of acrylic/PVC awnings and marine covers. Miller will also design a completely automated machine to fit your specific production needs. Miller Weldmaster provides three machines to fit the needs of any awning/marine cover company!

Acrylic Industry

www.weldmaster.com

Miller Weldmaster Corporation . 330.833.6739 . 1.877.935.3627 . [email protected] . www.weldmaster.com

The First Choice Globally of All Industrial Fabric Welding Solutions

2

M-100 Awnings Seal Type:

Custom Equipment for High Production

M-100 Awnings will increase your produc-tion by automating your processes

T-300 Extreme Shade™ For acrylic/PVC awnings & marine covers

The T-300 Extreme Shade™ combines versatility and precisely controlled operating parameters with an ergonomic design and interface for easy operation, speed, accuracy and productivity.

The T-300 Shade™ comes set up for high speed overlaps for the production of acrylic/PVC awnings and marine covers.

Designed to be used with our Extreme Seam Tape™•Easy one man operation •Can weld both PVC and Acrylic fabrics•Fastest welding speeds in the industry•

T-300 Extreme Shade™ Seal Types:

Overlap Seal

The T-300 Extreme Shade™ is designed to weld high speed overlaps for acrylic/PVC awnings and marine covers!

M-100 Awnings For the High Production Awning Maker

The M-100 Awning machine is capable of welding overlaps and hems with rope on both sides all in one process. Custom applications for any configuration.

Miller Weldmaster – Heat-Sealing Equipment For the Production of Inflatable ProductsMiller Weldmaster manufactures a variety of equipment for the production of inflatable products. Miller will design a machine to fit your specific inflatable production needs. Visit www.weldmaster.com and pick your industry for more Inflatable production equipment, and watch videos of these systems.

Inflatable Industry

www.weldmaster.com

Miller Weldmaster Corporation . 330.833.6739 . 1.877.935.3627 . [email protected] . www.weldmaster.com

The First Choice Globally of All Industrial Fabric Welding Solutions

1

The T-100 Custom inflatable is de-signed to weld an overlap with cover strips on top and bottom!

T-300 Extreme Curve™ For the Manufacturing of Inflatable products

The T-300 Extreme Curve™ combines versatility and precisely controlled operating parameters with an ergonomic design and interface for easy operation, speed, accuracy and productivity.

The T-300 Extreme Curve™ will easily allow you to seam curves and irregular shaped panels needed for producing inflatable products.

T-300 Extreme Curve™ Seal Types:

The T-300 Extreme Curve™ is designed to weld all the seams needed to produce your inflatable products!

The T-500™ is designed to weld all the seams needed to produce your inflatable products!

T-100 Custom Inflatable For the Manufacturing of Inflatable products

The T-100 Custom Inflatable will easily allow you to seam curves and irregular shaped panels needed for pro-ducing inflatable products. This custom machine is designed to weld an overlap seam with a cover strip on top and bottom of the seam to prevent water wicking.

T-100 Custom Inflatable Seal Types:

T-500™ with Swing Arm For the Manufacturing of Inflatable products

The T-500™ with swing arm will easily allow you to seam curves and irregular shaped panels needed for producing inflatable products. With its longer throat the T-500 will increase your production while decreasing fabric handling.

T-500™ Seal Types:

Overlap

Overlap

Lap Seal

Butt Seal

Butt Seal

Miller Weldmaster – Heat-Sealing Equipment For the Production of PoolsMiller Weldmaster manufactures a variety of equipment for the production of pools. Miller will design a machine to fit your specific inflatable production needs. Visit www.weldmaster.com and pick your industry for more pool production equipment, and watch videos of these systems.

Pool Industry

www.weldmaster.com

Miller Weldmaster Corporation . 330.833.6739 . 1.877.935.3627 . [email protected] . www.weldmaster.com

The First Choice Globally of All Industrial Fabric Welding Solutions

1

The 116 Pool Beading system is the fastest pool beading system on the market!

T-100 Single Roller Arm™ For welding sidewalls to pool bottoms

The T-100 with a Single Roller Arm is used to put sidewalls to pool bottoms in conjunction with a rotating table or a hanging system.

Please visit www.weldmaster.com/pool/ to see these systems in production.

The T-100 SR™ will produce the fastest seams in the industry!

the 112 Extreme™ will produce the fastest seams in the industry!

116 Pool Beading For the manufacturing pool sidewalls

The 116 Pool Beading System is used to weld pool beading to the sidewalls of pools faster than any other option in the industry. The 116 PB can be easily set up to weld beading to the top or bottom of either side of the sidewall.

Please visit www.weldmaster.com/pool/ to see this system in production.

112 Extreme™ For producing pool sidewalls and covers

The 112 Extreme is used to produce sidewalls and pool covers using the paten 112 traveling head.

Please visit www.weldmaster.com/112_extreme/ to see this system in production.

Miller Weldmaster – Heat-Sealing Equipment For the Production of Ducting and VentilationMiller Weldmaster manufactures a variety of equipment for the production of ducting/ventilation. Miller will design a completely automated machine to fit your specific ducting / ventilation production needs. Visit www.weldmaster.com and pick your industry for more ducting/ventilation production equipment, and watch videos of these systems.

Ducting / Ventilation Industry

www.weldmaster.com

Miller Weldmaster Corporation . 330.833.6739 . 1.877.935.3627 . [email protected] . www.weldmaster.com

The First Choice Globally of All Industrial Fabric Welding Solutions

1

FX-100™ For the Manufacturing of Ducting Tubes

The FX-100™ is specifically designed to weld Flexible reinforced ducting or tubing. This machine will weld reinforced tubes from a 2-inch diameter to a 48-inch diameter. The FX-100™ can also easily add a wear strip to the outside. All operations run simultaneous and are automated.

FX-100™ Seal Types:

The FX-100™ is designed to weld flexible ducting in a fully automated production system!

M-100 Ventilation Tubes For the Manufacturing of Ventilation Tubes

The M-100 Ventilation Tubes is designed for manufacturing ventilation tubes will weld several panels together into a tube, create t-tape, weld the t-tape onto the large tube, grommet the t-tape and cut the entire welded tube to length simultaneously and fully automated. These systems are designed to greatly increase production while substantially reducing labor costs.

M-100 Ventilation Seal Types:

FX-50™ For the Manufacturing of Ducting Tubes

The FX-50 is specifically designed to weld LARGE Flexible reinforced tubing. This machine will weld reinforcement to tubes from a 15-inch diameter to any diameter necessary. The FX-50 can also add a wear strip to the outside.

FX-50™ Seal Types:

The M-100 Ventilation Tubes is a completely automated ventilation tube production system.

The FX-50™ is designed to weld flexible ducting on a larger scale!

Miller Weldmaster – Heat-Sealing Equipment For the Production of Ducting and VentilationMiller Weldmaster manufactures a variety of equipment for the production of ducting/ventilation. Miller will design a completely automated machine to fit your specific ducting / ventilation production needs. Visit www.weldmaster.com and pick your industry for more ducting/ventilation production equipment, and watch videos of these systems.

Ducting / Ventilation Industry

www.weldmaster.com

Miller Weldmaster Corporation . 330.833.6739 . 1.877.935.3627 . [email protected] . www.weldmaster.com

The First Choice Globally of All Industrial Fabric Welding Solutions

2

M-100 Ventilation Tubes Seal Type:

M-100 Insulation Tape Seal Type:

M-100 Ventilation Tubes For the Manufacturing of Ventilation Tubes

The M-100 Ventilation Tubes is designed for manufacturing ventilation tubes will weld several panels together into a tube, create t-tape, weld the t-tape onto the large tube, grommet the t-tape and cut the entire welded tube to length simultaneously and fully automated. These systems are designed to greatly increase production while substantially reducing labor costs.

M-100 Insulation TapeFully Automated Insulation Tape Manufacturing

This M-100 system welds two thermoplastic pieces of fabric together with a piece of insulation in between. This system consists of two unwind stands, an M-100 frame with two welding heads, and a rewind system. Both outside edges are welded with a fin or prayer seal simultaneously.

The M-100 Ventilation Tubes is a completely automated ventilation tube production system.

The M-100 Insulation Tape is a completely automated production system.

Miller Weldmaster – Heat-Sealing Equipment For the Production of Filtration ProductsMiller Weldmaster manufactures a variety of equipment for the production of filtration products and cured in place pipeline. Miller will design a completely automated machine to fit your specific production needs. Visit www.weldmaster.com and pick your industry for more filtration production equipment, and watch videos of these systems.

Filtration Industry

www.weldmaster.com

Miller Weldmaster Corporation . 330.833.6739 . 1.877.935.3627 . [email protected] . www.weldmaster.com

The First Choice Globally of All Industrial Fabric Welding Solutions

1

These filtration systems are completely automated, proving to be the fastest tubing systems on the market!

This filtration system is completely automated, proving to be the fastest tubing system on the market!

T-300 Extreme Flex™ or T-100™ For the Manufacturing of Filtration Products

The T-300 Extreme Flex™ or T-100 configured with a single roller arm or off arm will enable the operator to feed non-woven fabric through the machine welding together filter tubes

The T-100 can be configured for a filter ring placement that will enable the operator to feed a non-woven cover strip, weld the strip onto the filter and cut simultaneously. This high production unit will save time and simplify the process of placing rings on the circumference of the filter tube.

Please visit www.weldmaster.com/filtration/ to see these machines running.

The T-300 Extreme Flex™ or T-100 will weld your filtration products with the fastest seaming technology on the market!

Complete Filter Systems For the Manufacturing of Filtration Tubes

This Miller Weldmaster automatic tubing system is able to pull non-woven fabric off of roll, pre-fold into a desired tube diameter and weld into a tube. After the system has welded the filter, it is pulled directly into a precise cut to length system. The filter tube system has line speeds up to 60 feet per minute with limited to no operator involvement. This system can be configured with or with out a sweep system. After the tubes are cut to length a sweep system will push the cut tubes off of the conveyor.

Please visit www.weldmaster.com/filtration/ to see these machines running filter tubes.

Small Filter System For the Manufacturing of Filtration Tubes

The Miller Weldmaster automatic tubing system is able to pull non-woven fabric off of roll, pre-fold into a desired tube diameter and weld into a tube. The filter tube system has line speeds up to 60 feet per minute with limited to no operator involvement.

Please visit www.weldmaster.com/filtration/ to see these machines running filter tubes.

Miller Weldmaster – Heat-Sealing Equipment For the Production of Filtration ProductsMiller Weldmaster manufactures a variety of equipment for the production of filtration products and cured in place pipeline. Miller will design a completely automated machine to fit your specific production needs. Visit www.weldmaster.com and pick your industry for more filtration production equipment, and watch videos of these systems.

Filtration Industry

www.weldmaster.com

Miller Weldmaster Corporation . 330.833.6739 . 1.877.935.3627 . [email protected] . www.weldmaster.com

The First Choice Globally of All Industrial Fabric Welding Solutions

2

The Ultra-Sonic end sealer makes the the Filter Tubing System the most complete system on the market!

This fully automated CIPP System is the most complete and fastest production system on the market!

Filter System - Ultra-Sonic End Sealing Fully Automated Filter Tube System & End Sealer

The Miller Weldmaster automatic tubing system is able to pull fabric off of roll, pre-fold into a desired tube diameter and weld into a tube. After the system has welded the filter, it is pulled directly into a precise cut to length system. From here the ultra-sonic sealing process was added to the filter line system enabling the operator to easily radius weld the ends of filter bags. With this filter line system, a complete filter bag can be produced in one process. The Miller Filter Line System has line speeds up to 60 feet per minute with limited to no operator involvement.

Please visit www.weldmaster.com/filtration/ to see this complete system in production.

Cured In Place Pipeline SystemFully Automated CIPP Production

The Miller Weldmaster automatic tubing system is able to pull non-woven fabric off of roll, pre-fold into a desired tube diameter and sewn into a tube. After the system has sewn the system then welds a tape over the sewn seam. The cured in place tube is then wound up on a core as a laser writes a programmed company name on the tube. The filter tube system has line speeds up to 60 feet per minute with limited to no operator involvement.

Please visit www.weldmaster.com/filtration/ to see this completely automated Cured In Place Pipeline system in production.

Miller Weldmaster – Heat-Sealing Equipment For the Production of Geo MembranesMiller Weldmaster manufactures a variety of equipment for the production of geo membranes. Miller will design a completely automated machine to fit your specific geo membrane production needs. Visit www.weldmaster.com and pick your industry for more geo membrane production equipment, and watch videos of these systems.

Geo Membrane Industry

www.weldmaster.com

Miller Weldmaster Corporation . 330.833.6739 . 1.877.935.3627 . [email protected] . www.weldmaster.com

The First Choice Globally of All Industrial Fabric Welding Solutions

1

The T-500™ is designed to weld all the seams needed to produce your geo membranes!

T-300 Extreme Flex™ For the Manufacturing of Geo Membranes

The T-300 Extreme FLex™ combines versatility and precisely controlled operating parameters with an ergonomic design and interface for easy operation, speed, accuracy and productivity.

The T-300 Extreme Flex™ will easily allow you to seam your panels together faster than any other technology on the market.

T-300 Extreme Flex™ Seal Types:

The T-300 Extreme Flex™ is designed to weld all the seams needed to produce geo membranes with the fastest technology on the market!

M-100 Geo Membrane For the Manufacturing of Geo Membranes

The M-100 Geo Membrane is a completely automated production process. This system takes 5 rolls and welds them together with a fold overlap seam. It then cuts the fabric to length and rewinds it onto one roll in a smaller shipping friendly configuration.

M-100 Geo Membrane Seal Types:

T-500™ For the Manufacturing of Geo Membranes

The T-500™ will easily allow you to seam your panels together, hem the ends faster than any other technology on the market. With its longer throat the T-500 will increase your production while decreasing fabric handling.

T-500 Seal Types:

Overlap

Overlap

Rope and Hem

The M-100 Geo is a completely automated geo membrane production system.

Rope and Hem

Pole Pocket

Pole Pocket

Hem

Hem

Custom Equipment for High Production

Miller Weldmaster – Heat-Sealing Equipment For the Production of Geo MembranesMiller Weldmaster manufactures a variety of equipment for the production of geo membranes. Miller will design a completely automated machine to fit your specific geo membrane production needs. Visit www.weldmaster.com and pick your industry for more geo membrane production equipment, and watch videos of these systems.

Geo Membrane Industry

www.weldmaster.com

Miller Weldmaster Corporation . 330.833.6739 . 1.877.935.3627 . [email protected] . www.weldmaster.com

The First Choice Globally of All Industrial Fabric Welding Solutions

2

Bi-Directional (fold overlap) Seal Type:

M-100 Geo Membrane Seal Type:

The Model 110 Seal Type:

Custom Equipment for High ProductionBi-Directional system is designed for high speed production and reduced fabric handling.

M-100 Geo Membrane is a completely automated tarpaulin production system.

Bi-Directional Welder High Production Geo Membrane Manufacturing

The Bi-Directional Welder is designed to drastically reduce fabric handling in a small amount of space. This machine simply welds panels together in a fold overlap seam or simple overlap seam. The Bi-Directional welder is designed for making any width or length liner or cover with only one person.

M-100 Geo Membrane Fully Automated Geo Membrane Manufacturing

The M-100 is a completely automated production process. This system takes 2 prefolded rolls and welds them together with a fold overlap seam. It then cuts the fabric to length and rewinds it onto one roll in a smaller shipping friendly configuration.

The Model 110 High Speed Geo Membrane Manufacturing

The Model 110 is a high speed geo membrane manufacturing system. This system is designed for high speed overlap seams.

The Model 110 is designed to weld overlap seams with the fastest welding technology in the industry.