led catalog - us electrical services, inc
TRANSCRIPT
www.ilp-inc.com Industrial Lighting Products 407-478-3759
ORDERING GUIDE:
Project Name:
Fixture tyPe:
LamPs/Board:
cataLog NumBer:
VoLts/Watts:
5 Y E A R W A R RA
NT
Y
PREMIUM HIGH BAY
HIGH BAY - 100W LED
SUITABLE APPLICATIONS • Warehouse • Distribution • Manufacturing Plant • Gymnasium
FEATURES • Aluminum Body with Steel Channel for Added Rigidity • Tool-Less Hinged Bottom Ballast Access Door • Frosted or Polycarbonate Lens Options • 95% Enhanced Aluminum Wide Distribution Reflectors (Std),
No Reflectors (Recommended) • High Gloss Polyester White Paint • Riveted Construction and Vented Ballast Channel • V-Clips for Dual Point Chain or Cable Hanging (Std) • Multiple Dimming and Sensor Options to Fully Control
Occupied and Unoccupied Light Levels • 5000K Color Temp (Std) • 5 Year Warranty • ETL Damp Listed • DesignLights Consortium® Qualified (2)
LED SYSTEMBoard (LG Chips) 4 x 56Calculated L70 (TM-21) 90,000 hoursDelivered Lumens 11,944 lmTotal Input Watts 107.6 WLuminaire Efficacy Rating (LER) 111.0 lm/WCorrelated Color Temperature (CCT) 5000 KColor Rendering Index (CRI) > 80Max Ambient Temp 130˚ F (3)
Universal Driver 120-277 V
LED System data above based on HB-100WLED-UNIV-5000K-N(1) LED Lumen Maintenance Estimates based on TM-21 projections for the light source at 25˚C ambient (2) Specific Configurations Listed on DLC. (3) Max ambient temp applies to standard driver installed.
REPLACES 250W MH
HB 100WLED UNIV 5000K eg: N
Series LED Driver Color Options � HB High Bay 2ft � 100WLED 4x56 Board � UNIV 120-277 Driver � 4000K* � FRL Frosted Acrylic Lens
� 5000K* � PCL Polycarbonate Lens .125” � N* No Reflector (recommended)
*DLC Listed Config. � DIM 0-10V Dimmable Driver � FIOS On/Off Occupancy Sensor Installed � FIOSPC On/Off Occupancy Sensor w/ Photocell � USDC User Selectable Dimming Control � USBD User Select Bi-level Dim w/ Occ. Sensor � BDxx Preset Bi-level Dim Sensor (xx=% eg. 20,30)
� BDxxPC Preset Bi-level Dim Sensor w/ Photocell � DHPC Daylight Harvesting � PC Photocell
**All 347V applications please � SD480** 480V Step Down Transformercontact factory for pricing � LEDBB LED Battery Backup (may reduce max ambient)
� CLD For Below 0˚C/32˚F Environment � CORDx Cord (X = ft)
� QDCx Quick Disconnect Cord (X = ft)
� HB-XX-PAD Y-Toggle Cable System (XX = in)
� WC 11 Ga Wire Cage
www.ilp-inc.com Industrial Lighting Products 407-478-3759
MOUNTING OPTIONS
PREMIUM HIGH BAY
HIGH BAY - 100W LED
23.080
3.378
23.749
HB-100WLED-UNIV-5000K-N
SUMMARY DATA
PLANE AND CONE DIAGRAM
Photometric values based upon tests performed in compliance with LM-79. IES files can be downloaded at www.ilp-inc.com
LUMINAIRE OUTPUT = 11956 LM120.0VAC 0.8982A 107.6W PF=0.998
HEMISPHERES TESTED: LOWEREFFICIENCY (Total): 100.0 %EFFICIENCY (Downlight): 100.0 %SPACING CRITERION (0-Deg.): 1.30SPACING CRITERION (90-Deg.): 1.30LUMENS/LAMP: 11973.07NO. OF LAMPS: 1LUMINOUS OPENING: RECTANGULAR Width: 1.92 (Feet) Length: 1.92 Height: 0.00INPUT WATTS: 107.6
10 20 30 40
50
60
70
80
90
1000
2000
3000
4000
Quadralaterally Symmetric Solid: 0 Degrees Small Dash: 45 Degrees Large Dash: 90 Degrees
• V-Clips for dual point chain or cable hanging (standard)
• Y-Toggle Cable Kit - Includes 2 adjustable cable hangers
• SMBKIT for surface mounting with 2” space above fixture
• Fixture Mounting Box (FMB) - Includes rigid box to attach to the fixture, provides for single point mounting to accept a pendant, hook, or conduit hub (sold separately).
FMB HUB 3/4 CONDUIT
HB-XX-PAD SMBKIT
HOOK
V-Clips
www.ilp-inc.com Industrial Lighting Products 407-478-3759
ORDERING GUIDE:
Project Name:
Fixture tyPe:
LamPs/Board:
cataLog NumBer:
VoLts/Watts:
5 Y E A R W A R RA
NT
Y
PREMIUM HIGH BAY
HIGH BAY FROSTED - 100W LED
SUITABLE APPLICATIONS • Warehouse • Distribution • Manufacturing Plant • Gymnasium
FEATURES • Aluminum Body with Steel Channel for Added Rigidity • Tool-Less Hinged Bottom Ballast Access Door • Frosted Acrylic Lens (Std), Polycarbonate Lens Optional • 95% Enhanced Aluminum Wide Distribution Reflectors (Std),
No Reflectors (Recommended) • High Gloss Polyester White Paint • Riveted Construction and Vented Ballast Channel • V-Clips for Dual Point Chain or Cable Hanging (Std) • Multiple Dimming and Sensor Options to Fully Control
Occupied and Unoccupied Light Levels • 5000K Color Temp (Std) • 5 Year Warranty • ETL Damp Listed • DesignLights Consortium® Qualified (2)
HB 100WLED UNIV 5000K FRL
Series LED Driver Color Options � HB High Bay 2ft � 100WLED 4x56 Board � UNIV 120-277 Driver � 4000K* T FRL* Frosted Acrylic Lens
� 5000K* � PCL Polycarbonate Lens .125” � N* No Reflector (recommended)
*DLC Listed Config. � DIM 0-10V Dimmable Driver � FIOS On/Off Occupancy Sensor Installed � FIOSPC On/Off Occupancy Sensor w/ Photocell � USDC User Selectable Dimming Control � USBD User Select Bi-level Dim w/ Occ. Sensor � BDxx Preset Bi-level Dim Sensor (xx=% eg. 20,30)
� BDxxPC Preset Bi-level Dim Sensor w/ Photocell � DHPC Daylight Harvesting � PC Photocell
**All 347V applications please � SD480** 480V Step Down Transformercontact factory for pricing � LEDBB LED Battery Backup (may reduce max ambient)
� CLD For Below 0˚C/32˚F Environment � CORDx Cord (X = ft)
� QDCx Quick Disconnect Cord (X = ft)
� HB-XX-PAD Y-Toggle Cable System (XX = in)
� WC 11 Ga Wire Cage
LED SYSTEMBoard (LG Chips) 4 x 56Calculated L70 (TM-21) 90,000 hoursDelivered Lumens 11,233 lmTotal Input Watts 107.6 WLuminaire Efficacy Rating (LER) 104.4 lm/WCorrelated Color Temperature (CCT) 5000 KColor Rendering Index (CRI) > 80Max Ambient Temp 130˚ F (3)
Universal Driver 120-277 V
LED System data above based on HB-100WLED-UNIV-5000K-N-FRL(1) LED Lumen Maintenance Estimates based on TM-21 projections for the light source at 25˚C ambient(2) Specific Configurations Listed on DLC. (3) Max ambient temp applies to standard driver installed.
REPLACES 250W MH
www.ilp-inc.com Industrial Lighting Products 407-478-3759
MOUNTING OPTIONS
PREMIUM HIGH BAY
HIGH BAY FROSTED - 100W LED
23.080
3.378
23.749
HB-100WLED-UNIV-5000K-N-FRL
SUMMARY DATA
PLANE AND CONE DIAGRAM
Photometric values based upon tests performed in compliance with LM-79. IES files can be downloaded at www.ilp-inc.com
LUMINAIRE OUTPUT = 10809 LM120.0VAC 0.8969A 107.4W PF=0.998
HEMISPHERES TESTED: LOWEREFFICIENCY (Total): 100.0 %EFFICIENCY (Downlight): 100.0 %SPACING CRITERION (0-Deg.): 1.26SPACING CRITERION (90-Deg.): 1.26LUMENS/LAMP: 10820.15NO. OF LAMPS: 1LUMINOUS OPENING: RECTANGULAR Width: 1.92 (Feet) Length: 1.92 Height: 0.00INPUT WATTS: 107.4
10 20 30 40
50
60
70
80
90
1000
2000
3000
4000
Quadralaterally Symmetric Solid: 0 Degrees Small Dash: 45 Degrees Large Dash: 90 Degrees
• V-Clips for dual point chain or cable hanging (standard)
• Y-Toggle Cable Kit - Includes 2 adjustable cable hangers
• SMBKIT for surface mounting with 2” space above fixture
• Fixture Mounting Box (FMB) - Includes rigid box to attach to the fixture, provides for single point mounting to accept a pendant, hook, or conduit hub (sold separately).
FMB HUB 3/4 CONDUIT
HB-XX-PAD SMBKIT
HOOK
V-Clips
www.ilp-inc.com Industrial Lighting Products 407-478-3759
ORDERING GUIDE:
Project Name:
Fixture tyPe:
LamPs/Board:
cataLog NumBer:
VoLts/Watts:
5 Y E A R W A R RA
NT
Y
PREMIUM HIGH BAY
HIGH BAY - 150W LED
SUITABLE APPLICATIONS • Warehouse • Distribution • Manufacturing Plant • Gymnasium
FEATURES • Aluminum Body with Steel Channel for Added Rigidity • Tool-Less Hinged Bottom Ballast Access Door • Frosted or Polycarbonate Lens Options • 95% Enhanced Aluminum Wide Distribution Reflectors (Std),
No Reflectors (Recommended) • High Gloss Polyester White Paint • Riveted Construction and Vented Ballast Channel • V-Clips for Dual Point Chain or Cable Hanging (Std) • Multiple Dimming and Sensor Options to Fully Control
Occupied and Unoccupied Light Levels • 5000K Color Temp (Std) • 5 Year Warranty • ETL Damp Listed • DesignLights Consortium® Qualified (2)
HB 150WLED UNIV 5000K eg: N
Series LED Driver Color Options � HB High Bay 4ft � 150WLED 6x56 Board � UNIV 120-277 Driver � 4000K* � FRL Frosted Acrylic Lens
� 5000K* � PCL Polycarbonate Lens .125” � N* No Reflector (recommended)
*DLC Listed Config. � DIM 0-10V Dimmable Driver � FIOS On/Off Occupancy Sensor Installed � FIOSPC On/Off Occupancy Sensor w/ Photocell � USDC User Selectable Dimming Control � USBD User Select Bi-level Dim w/ Occ. Sensor � BDxx Preset Bi-level Dim Sensor (xx=% eg. 20,30)
� BDxxPC Preset Bi-level Dim Sensor w/ Photocell � DHPC Daylight Harvesting � PC Photocell
**All 347V applications please � SD480** 480V Step Down Transformercontact factory for pricing � LEDBB LED Battery Backup (may reduce max ambient)
� CLD For Below 0˚C/32˚F Environment � CORDx Cord (X = ft)
� QDCx Quick Disconnect Cord (X = ft)
� HB-XX-PAD Y-Toggle Cable System (XX = in)
� WC 11 Ga Wire Cage
LED SYSTEMBoard (LG Chips) 6 x 56Calculated L70 (TM-21) 99,000 hoursDelivered Lumens 18,252 lmTotal Input Watts 169.0 WLuminaire Efficacy Rating (LER) 108.0 lm/WCorrelated Color Temperature (CCT) 5000 KColor Rendering Index (CRI) > 80Max Ambient Temp 130˚ F (3)
Universal Driver 120-277 V
LED System data above based on HB-150WLED-UNIV-5000K-N(1) LED Lumen Maintenance Estimates based on TM-21 projections for the light source at 25˚C ambient(2) Specific Configurations Listed on DLC. (3) Max ambient temp applies to standard driver installed.
REPLACES 400W MH
www.ilp-inc.com Industrial Lighting Products 407-478-3759
MOUNTING OPTIONS
PREMIUM HIGH BAY
HIGH BAY - 150W LED
47.08
3.38
23.75
47.08
3.38
23.75
HB-150WLED-UNIV-5000K-N
SUMMARY DATA
PLANE AND CONE DIAGRAM
Photometric values based upon tests performed in compliance with LM-79. IES files can be downloaded at www.ilp-inc.com
LUMINAIRE OUTPUT = 18608 LM120.0V 1.420A 169.2W PF= 0.993
HEMISPHERES TESTED: LOWEREFFICIENCY (Total): 100.0 %EFFICIENCY (Downlight): 100.0 %SPACING CRITERION (0-Deg.): 1.30SPACING CRITERION (90-Deg.): 1.30LUMENS/LAMP: 18625.75NO. OF LAMPS: 1LUMINOUS OPENING: RECTANGULAR Width: 1.91 (Feet) Length: 3.92 Height: 0.00INPUT WATTS: 169.2
10 20 30 40
50
60
70
80
90
1000
2000
3000
4000
5000
6000
Quadralaterally Symmetric Solid: 0 Degrees Small Dash: 45 Degrees Large Dash: 90 Degrees
• V-Clips for dual point chain or cable hanging (standard)
• Y-Toggle Cable Kit - Includes 2 adjustable cable hangers
• SMBKIT for surface mounting with 2” space above fixture
• Fixture Mounting Box (FMB) - Includes rigid box to attach to the fixture, provides for single point mounting to accept a pendant, hook, or conduit hub (sold separately).
FMB HUB 3/4 CONDUIT
HB-XX-PAD SMBKIT
HOOK
V-Clips
www.ilp-inc.com Industrial Lighting Products 407-478-3759
ORDERING GUIDE:
Project Name:
Fixture tyPe:
LamPs/Board:
cataLog NumBer:
VoLts/Watts:
5 Y E A R W A R RA
NT
Y
PREMIUM HIGH BAY
HIGH BAY FROSTED - 150W LED
SUITABLE APPLICATIONS • Warehouse • Distribution • Manufacturing Plant • Gymnasium
FEATURES • Aluminum Body with Steel Channel for Added Rigidity • Tool-Less Hinged Bottom Ballast Access Door • Frosted Acrylic Lens (Std), Polycarbonate Lens Optional • 95% Enhanced Aluminum Wide Distribution Reflectors (Std),
No Reflectors (Recommended) • High Gloss Polyester White Paint • Riveted Construction and Vented Ballast Channel • V-Clips for Dual Point Chain or Cable Hanging (Std) • Multiple Dimming and Sensor Options to Fully Control
Occupied and Unoccupied Light Levels • 5000K Color Temp (Std) • 5 Year Warranty • ETL Damp Listed • DesignLights Consortium® Qualified (2)
HB 150WLED UNIV 5000K FRL
Series LED Driver Color Options � HB High Bay 4ft � 150WLED 6x56 Board � UNIV 120-277 Driver � 4000K* T FRL* Frosted Acrylic Lens
� 5000K* � PCL Polycarbonate Lens .125” � N* No Reflector (recommended)
*DLC Listed Config. � DIM 0-10V Dimmable Driver � FIOS On/Off Occupancy Sensor Installed � FIOSPC On/Off Occupancy Sensor w/ Photocell � USDC User Selectable Dimming Control � USBD User Select Bi-level Dim w/ Occ. Sensor � BDxx Preset Bi-level Dim Sensor (xx=% eg. 20,30)
� BDxxPC Preset Bi-level Dim Sensor w/ Photocell � DHPC Daylight Harvesting � PC Photocell
**All 347V applications please � SD480** 480V Step Down Transformercontact factory for pricing � LEDBB LED Battery Backup (may reduce max ambient)
� CLD For Below 0˚C/32˚F Environment � CORDx Cord (X = ft)
� QDCx Quick Disconnect Cord (X = ft)
� HB-XX-PAD Y-Toggle Cable System (XX = in)
� WC 11 Ga Wire Cage
LED SYSTEMBoard (LG Chips) 6 x 56Calculated L70 (TM-21) 99,000 hoursDelivered Lumens 17,069 lmTotal Input Watts 169.0 WLuminaire Efficacy Rating (LER) 101.0 lm/WCorrelated Color Temperature (CCT) 5000 KColor Rendering Index (CRI) > 80Max Ambient Temp 130˚ F (3)
Universal Driver 120-277 V
LED System data above based on HB-150WLED-UNIV-5000K-N-FRL(1) LED Lumen Maintenance Estimates based on TM-21 projections for the light source at 25˚C ambient(2) Specific Configurations Listed on DLC. (3) Max ambient temp applies to standard driver installed.
REPLACES 400W MH
www.ilp-inc.com Industrial Lighting Products 407-478-3759
MOUNTING OPTIONS
PREMIUM HIGH BAY
HIGH BAY FRL - 150W LED HB-150WLED-UNIV-5000K-N-FRL
SUMMARY DATA
PLANE AND CONE DIAGRAM
Photometric values based upon tests performed in compliance with LM-79. IES files can be downloaded at www.ilp-inc.com
LUMINAIRE OUTPUT = 16560 LM120.0V 1.419A 169.0W PF= 0.993
HEMISPHERES TESTED: LOWEREFFICIENCY (Total): 100.0 %EFFICIENCY (Downlight): 100.0 %SPACING CRITERION (0-Deg.): 1.25SPACING CRITERION (90-Deg.): 1.25LUMENS/LAMP: 16574.8NO. OF LAMPS: 1LUMINOUS OPENING: RECTANGULAR Width: 1.91 (Feet) Length: 3.92 Height: 0.00INPUT WATTS: 169
10 20 30 40
50
60
70
80
90
1000
2000
3000
4000
5000
6000
Quadralaterally Symmetric Solid: 0 Degrees Small Dash: 45 Degrees Large Dash: 90 Degrees
47.08
3.38
23.75
47.08
3.38
23.75
• V-Clips for dual point chain or cable hanging (standard)
• Y-Toggle Cable Kit - Includes 2 adjustable cable hangers
• SMBKIT for surface mounting with 2” space above fixture
• Fixture Mounting Box (FMB) - Includes rigid box to attach to the fixture, provides for single point mounting to accept a pendant, hook, or conduit hub (sold separately).
FMB HUB 3/4 CONDUIT
HB-XX-PAD SMBKIT
HOOK
V-Clips
www.ilp-inc.com Industrial Lighting Products 407-478-3759
ORDERING GUIDE:
Project Name:
Fixture tyPe:
LamPs/Board:
cataLog NumBer:
VoLts/Watts:
5 Y E A R W A R RA
NT
Y
PREMIUM HIGH BAY
HIGH BAY - 200W LED
SUITABLE APPLICATIONS • Warehouse • Distribution • Manufacturing Plant • Gymnasium
FEATURES • Aluminum Body with Steel Channel for Added Rigidity • Tool-Less Hinged Bottom Ballast Access Door • Frosted Acrylic or Polycarbonate Lens Options • 95% Enhanced Aluminum Wide Distribution Reflectors (Std),
No Reflectors (Recommended) • High Gloss Polyester White Paint • Riveted Construction and Vented Ballast Channel • V-Clips for Dual Point Chain or Cable Hanging (Std) • Multiple Dimming and Sensor Options to Fully Control
Occupied and Unoccupied Light Levels • 5000K Color Temp (Std) • 5 Year Warranty • ETL Damp Listed • DesignLights Consortium® Qualified (2)
LED SYSTEMBoard (LG Chips) 8 x 56Calculated L70 (TM-21) 89,000 hoursDelivered Lumens 24,819 lmTotal Input Watts 217.9 WLuminaire Efficacy Rating (LER) 113.9 lm/WCorrelated Color Temperature (CCT) 5000 KColor Rendering Index (CRI) > 80Max Ambient Temp 130˚ F (3)
Universal Driver 120-277 V
LED System data above based on HB-200WLED-UNIV-5000K-N(1) LED Lumen Maintenance Estimates based on TM-21 projections for the light source at 25˚C ambient(2) Specific Configurations Listed on DLC. (3) Max ambient temp applies to standard driver installed.
HB 200WLED UNIV 5000K eg: N
Series LED Driver Color Options � HB High Bay 4ft � 200WLED 8x56 Board � UNIV 120-277 Driver � 4000K* � FRL Frosted Acrylic Lens
� 5000K* � PCL Polycarbonate Lens .125” � N* No Reflector (recommended)
*DLC Listed Config. � DIM 0-10V Dimmable Driver � FIOS On/Off Occupancy Sensor Installed � FIOSPC On/Off Occupancy Sensor w/ Photocell � USDC User Selectable Dimming Control � USBD User Select Bi-level Dim w/ Occ. Sensor � BDxx Preset Bi-level Dim Sensor (xx=% eg. 20,30)
� BDxxPC Preset Bi-level Dim Sensor w/ Photocell � DHPC Daylight Harvesting � PC Photocell
**All 347V applications please � SD480** 480V Step Down Transformercontact factory for pricing � LEDBB LED Battery Backup (may reduce max ambient)
� CLD For Below 0˚C/32˚F Environment � CORDx Cord (X = ft)
� QDCx Quick Disconnect Cord (X = ft)
� HB-XX-PAD Y-Toggle Cable System (XX = in)
� WC 11 Ga Wire Cage
REPLACES 400W MH
www.ilp-inc.com Industrial Lighting Products 407-478-3759
MOUNTING OPTIONS
PREMIUM HIGH BAY
HIGH BAY - 200W LED HB-200WLED-UNIV-5000K-N
SUMMARY DATA
PLANE AND CONE DIAGRAM
Photometric values based upon tests performed in compliance with LM-79. IES files can be downloaded at www.ilp-inc.com
LUMINAIRE OUTPUT = 24854 LM120.0V 1.828A 218.2W PF= 0.994
HEMISPHERES TESTED: LOWEREFFICIENCY (Total): 100.0 %EFFICIENCY (Downlight): 100.0 %SPACING CRITERION (0-Deg.): 1.30SPACING CRITERION (90-Deg.): 1.30LUMENS/LAMP: 24882.64NO. OF LAMPS: 1LUMINOUS OPENING: RECTANGULAR Width: 1.91 (Feet) Length: 3.92 Height: 0.00INPUT WATTS: 218.3
10 20 30 40
50
60
70
80
90
1500
3000
4500
6000
7500
Quadralaterally Symmetric Solid: 0 Degrees Small Dash: 45 Degrees Large Dash: 90 Degrees
47.08
3.38
23.75
47.08
3.38
23.75
• V-Clips for dual point chain or cable hanging (standard)
• Y-Toggle Cable Kit - Includes 2 adjustable cable hangers
• SMBKIT for surface mounting with 2” space above fixture
• Fixture Mounting Box (FMB) - Includes rigid box to attach to the fixture, provides for single point mounting to accept a pendant, hook, or conduit hub (sold separately).
FMB HUB 3/4 CONDUIT
HB-XX-PAD SMBKIT
HOOK
V-Clips
www.ilp-inc.com Industrial Lighting Products 407-478-3759
ORDERING GUIDE:
Project Name:
Fixture tyPe:
LamPs/Board:
cataLog NumBer:
VoLts/Watts:
5 Y E A R W A R RA
NT
Y
PREMIUM HIGH BAY
HIGH BAY FROSTED - 200W LED
SUITABLE APPLICATIONS • Warehouse • Distribution • Manufacturing Plant • Gymnasium
FEATURES • Aluminum Body with Steel Channel for Added Rigidity • Tool-Less Hinged Bottom Ballast Access Door • Frosted Acrylic Lens (Std), Polycarbonate Lens Optional • 95% Enhanced Aluminum Wide Distribution Reflectors (Std),
No Reflectors (Recommended) • High Gloss Polyester White Paint • Riveted Construction and Vented Ballast Channel • V-Clips for Dual Point Chain or Cable Hanging (Std) • Multiple Dimming and Sensor Options to Fully Control
Occupied and Unoccupied Light Levels • 5000K Color Temp (Std) • 5 Year Warranty • ETL Damp Listed • DesignLights Consortium® Qualified (2)
LED SYSTEMBoard (LG Chips) 8 x 56Calculated L70 (TM-21) 89,000 hoursDelivered Lumens 22,051 lmTotal Input Watts 217.9 WLuminaire Efficacy Rating (LER) 101.2 lm/WCorrelated Color Temperature (CCT) 5000 KColor Rendering Index (CRI) > 80Max Ambient Temp 130˚ F (3)
Universal Driver 120-277 V
LED System data above based on HB-200WLED-UNIV-5000K-N-FRL(1) LED Lumen Maintenance Estimates based on TM-21 projections for the light source at 25˚C ambient(2) Specific Configurations Listed on DLC. (3) Max ambient temp applies to standard driver installed.
HB 200WLED UNIV 5000K FRL
Series LED Driver Color Options � HB High Bay 4ft � 200WLED 8x56 Board � UNIV 120-277 Driver � 4000K* T FRL* Frosted Acrylic Lens
� 5000K* � PCL Polycarbonate Lens .125” � N* No Reflector (recommended)
*DLC Listed Config. � DIM 0-10V Dimmable Driver � FIOS On/Off Occupancy Sensor Installed � FIOSPC On/Off Occupancy Sensor w/ Photocell � USDC User Selectable Dimming Control � USBD User Select Bi-level Dim w/ Occ. Sensor � BDxx Preset Bi-level Dim Sensor (xx=% eg. 20,30)
� BDxxPC Preset Bi-level Dim Sensor w/ Photocell � DHPC Daylight Harvesting � PC Photocell
**All 347V applications please � SD480** 480V Step Down Transformercontact factory for pricing � LEDBB LED Battery Backup (may reduce max ambient)
� CLD For Below 0˚C/32˚F Environment � CORDx Cord (X = ft)
� QDCx Quick Disconnect Cord (X = ft)
� HB-XX-PAD Y-Toggle Cable System (XX = in)
� WC 11 Ga Wire Cage
REPLACES 400W MH
www.ilp-inc.com Industrial Lighting Products 407-478-3759
MOUNTING OPTIONS
PREMIUM HIGH BAY
HIGH BAY FRL - 200W LED HB-200WLED-UNIV-5000K-N-FRL
SUMMARY DATA
PLANE AND CONE DIAGRAM
Photometric values based upon tests performed in compliance with LM-79. IES files can be downloaded at www.ilp-inc.com
LUMINAIRE OUTPUT = 22061 LM120.0V 1.823A 217.9W PF= 0.995
HEMISPHERES TESTED: LOWEREFFICIENCY (Total): 100.0 %EFFICIENCY (Downlight): 100.0 %SPACING CRITERION (0-Deg.): 1.24SPACING CRITERION (90-Deg.): 1.24LUMENS/LAMP: 22081.88NO. OF LAMPS: 1LUMINOUS OPENING: RECTANGULAR Width: 1.91 (Feet) Length: 3.92 Height: 0.00INPUT WATTS: 217.9
10 20 30 40
50
60
70
80
90
1500
3000
4500
6000
7500
Quadralaterally Symmetric Solid: 0 Degrees Small Dash: 45 Degrees Large Dash: 90 Degrees
47.08
3.38
23.75
47.08
3.38
23.75
• V-Clips for dual point chain or cable hanging (standard)
• Y-Toggle Cable Kit - Includes 2 adjustable cable hangers
• SMBKIT for surface mounting with 2” space above fixture
• Fixture Mounting Box (FMB) - Includes rigid box to attach to the fixture, provides for single point mounting to accept a pendant, hook, or conduit hub (sold separately).
FMB HUB 3/4 CONDUIT
HB-XX-PAD SMBKIT
HOOK
V-Clips
www.ilp-inc.com Industrial Lighting Products 407-478-3759
ORDERING GUIDE:
Project Name:
Fixture tyPe:
LamPs/Board:
cataLog NumBer:
VoLts/Watts:
5 Y E A R W A R RA
NT
Y
PREMIUM HIGH BAY
HIGH BAY - 300W LED
SUITABLE APPLICATIONS • Warehouse • Distribution • Manufacturing Plant • Gymnasium
FEATURES • Aluminum Body with Steel Channels for Added Rigidity • Tool-Less Hinged Bottom Ballast Access Doors • Frosted Acrylic or Polycarbonate Lens Options • 95% Enhanced Aluminum Wide Distribution Reflectors (Std),
No Reflectors (Recommended) • High Gloss Polyester White Paint • Riveted Construction and Vented Ballast Channel • V-Clips for Dual Point Chain or Cable Hanging (Std) • Multiple Dimming and Sensor Options to Fully Control
Occupied and Unoccupied Light Levels • 5000K Color Temp (Std) • 5 Year Warranty • ETL Damp Listed • DesignLights Consortium® Qualified (2)
LED SYSTEMBoard (LG Chips) 12 x 56Calculated L70 (TM-21) 88,000 hoursDelivered Lumens 36,725 lmTotal Input Watts 325.0 WLuminaire Efficacy Rating (LER) 113.0 lm/WCorrelated Color Temperature (CCT) 5000 KColor Rendering Index (CRI) > 80Max Ambient Temp 130˚ F (3)
Universal Driver 120-277 V
LED System data above based on HB-300WLED-UNIV-5000K-N(1) LED Lumen Maintenance Estimates based on TM-21 projections for the light source at 25˚C ambient(2) Specific Configurations Listed on DLC. (3) Max ambient temp applies to standard driver installed.
HB 300WLED UNIV 5000K eg: N
Series LED Driver Color Options � HB High Bay 4ft � 300WLED 12x56 Board � UNIV 120-277 Driver � 4000K* � FRL Frosted Acrylic Lens
� 5000K* � PCL Polycarbonate Lens .125” � N* No Reflector (recommended)
*DLC Listed Config. � DIM 0-10V Dimmable Driver � FIOS On/Off Occupancy Sensor Installed � FIOSPC On/Off Occupancy Sensor w/ Photocell � USDC User Selectable Dimming Control � USBD User Select Bi-level Dim w/ Occ. Sensor � BDxx Preset Bi-level Dim Sensor (xx=% eg. 20,30)
� BDxxPC Preset Bi-level Dim Sensor w/ Photocell � DHPC Daylight Harvesting � PC Photocell
**All 347V applications please � SD480** 480V Step Down Transformercontact factory for pricing � LEDBB LED Battery Backup (may reduce max ambient)
� CLD For Below 0˚C/32˚F Environment � CORDx Cord (X = ft)
� QDCx Quick Disconnect Cord (X = ft)
� HB-XX-PAD Y-Toggle Cable System (XX = in)
� WC 11 Ga Wire Cage
REPLACES 750W MH
www.ilp-inc.com Industrial Lighting Products 407-478-3759
MOUNTING OPTIONS
PREMIUM HIGH BAY
HIGH BAY - 300W LED
47.080
3.5837
.37
• V-Clips for dual point chain or cable hanging (standard)
• Y-Toggle Cable Kit - Includes 2 adjustable cable hangers
• Rigid Center Mount Bracket Kit (RCMBK)
Includes rigid bracket and screws to attach it to the fixture, provides for single point mounting to accept a pendant, hook, or conduit hub (sold separately).
HB-300WLED-UNIV-5000K-N
SUMMARY DATA
PLANE AND CONE DIAGRAM
Photometric values based upon tests performed in compliance with LM-79. IES files can be downloaded at www.ilp-inc.com
LUMINAIRE OUTPUT = 36884 LM120.1V 2.726A 325.6W PF= 0.995
HEMISPHERES TESTED: LOWEREFFICIENCY (Total): 100.0 %EFFICIENCY (Downlight): 100.0 %SPACING CRITERION (0-Deg.): 1.30SPACING CRITERION (90-Deg.): 1.30LUMENS/LAMP: 36924.92NO. OF LAMPS: 1LUMINOUS OPENING: RECTANGULAR Width: 3.04 (Feet) Length: 3.92 Height: 0.00INPUT WATTS: 325.6
10 20 30 40
50
60
70
80
90
2000
4000
6000
8000
10000
12000
Quadralaterally Symmetric Solid: 0 Degrees Small Dash: 45 Degrees Large Dash: 90 Degrees
RCMBK (shown with hook)
HUB 3/4 CONDUIT
HB-XX-PAD
HOOK
V-Clips
www.ilp-inc.com Industrial Lighting Products 407-478-3759
ORDERING GUIDE:
Project Name:
Fixture tyPe:
LamPs/Board:
cataLog NumBer:
VoLts/Watts:
5 Y E A R W A R RA
NT
Y
PREMIUM HIGH BAY
HIGH BAY FROSTED - 300W LED
SUITABLE APPLICATIONS • Warehouse • Distribution • Manufacturing Plant • Gymnasium
FEATURES • Aluminum Body with Steel Channels for Added Rigidity • Tool-Less Hinged Bottom Ballast Access Doors • Frosted Acrylic Lens (Std), Polycarbonate Lens Optional • 95% Enhanced Aluminum Wide Distribution Reflectors (Std),
No Reflectors (Recommended) • High Gloss Polyester White Paint • Riveted Construction and Vented Ballast Channel • V-Clips for Dual Point Chain or Cable Hanging (Std) • Multiple Dimming and Sensor Options to Fully Control
Occupied and Unoccupied Light Levels • 5000K Color Temp (Std) • 5 Year Warranty • ETL Damp Listed • DesignLights Consortium® Qualified (2)
LED SYSTEMBoard (LG Chips) 12 x 56Calculated L70 (TM-21) 88,000 hoursDelivered Lumens 33,150 lmTotal Input Watts 325.0 WLuminaire Efficacy Rating (LER) 102.0 lm/WCorrelated Color Temperature (CCT) 5000 KColor Rendering Index (CRI) > 80Max Ambient Temp 130˚ F (3)
Universal Driver 120-277 V
LED System data above based on HB-300WLED-UNIV-5000K-N-FRL(1) LED Lumen Maintenance Estimates based on TM-21 projections for the light source at 25˚C ambient(2) Specific Configurations Listed on DLC. (3) Max ambient temp applies to standard driver installed.
HB 300WLED UNIV 5000K FRL
Series LED Driver Color Options � HB High Bay 4ft � 300WLED 12x56 Board � UNIV 120-277 Driver � 4000K* T FRL* Frosted Acrylic Lens
� 5000K* � PCL Polycarbonate Lens .125” � N* No Reflector (recommended)
*DLC Listed Config. � DIM 0-10V Dimmable Driver � FIOS On/Off Occupancy Sensor Installed � FIOSPC On/Off Occupancy Sensor w/ Photocell � USDC User Selectable Dimming Control � USBD User Select Bi-level Dim w/ Occ. Sensor � BDxx Preset Bi-level Dim Sensor (xx=% eg. 20,30)
� BDxxPC Preset Bi-level Dim Sensor w/ Photocell � DHPC Daylight Harvesting � PC Photocell
**All 347V applications please � SD480** 480V Step Down Transformercontact factory for pricing � LEDBB LED Battery Backup (may reduce max ambient)
� CLD For Below 0˚C/32˚F Environment � CORDx Cord (X = ft)
� QDCx Quick Disconnect Cord (X = ft)
� HB-XX-PAD Y-Toggle Cable System (XX = in)
� WC 11 Ga Wire Cage
REPLACES 750W MH
www.ilp-inc.com Industrial Lighting Products 407-478-3759
MOUNTING OPTIONS
PREMIUM HIGH BAY
HIGH BAY FROSTED - 300W LED
47.080
3.5837
.37
• V-Clips for dual point chain or cable hanging (standard)
• Y-Toggle Cable Kit - Includes 2 adjustable cable hangers
• Rigid Center Mount Bracket Kit (RCMBK)
Includes rigid bracket and screws to attach it to the fixture, provides for single point mounting to accept a pendant, hook, or conduit hub (sold separately).
HB-300WLED-UNIV-5000K-N-FRL
SUMMARY DATA
PLANE AND CONE DIAGRAM
Photometric values based upon tests performed in compliance with LM-79. IES files can be downloaded at www.ilp-inc.com
LUMINAIRE OUTPUT = 32478 LM120.1V 2.720A 325.0W PF= 0.995
HEMISPHERES TESTED: LOWEREFFICIENCY (Total): 100.0 %EFFICIENCY (Downlight): 100.0 %SPACING CRITERION (0-Deg.): 1.25SPACING CRITERION (90-Deg.): 1.25LUMENS/LAMP: 32509.32NO. OF LAMPS: 1LUMINOUS OPENING: RECTANGULAR Width: 3.04 (Feet) Length: 3.92 Height: 0.00INPUT WATTS: 325
10 20 30 40
50
60
70
80
90
2000
4000
6000
8000
10000
12000
Quadralaterally Symmetric Solid: 0 Degrees Small Dash: 45 Degrees Large Dash: 90 Degrees
RCMBK (shown with hook)
HUB 3/4 CONDUIT
HB-XX-PAD
HOOK
V-Clips
www.ilp-inc.com Industrial Lighting Products 407-478-3759
ORDERING GUIDE:
Project Name:
Fixture tyPe:
LamPs/Board:
cataLog NumBer:
VoLts/Watts:
5 Y E A R W A R RA
NT
Y
PREMIUM HIGH BAY
HIGH BAY - 400W LED
SUITABLE APPLICATIONS • Warehouse • Distribution • Manufacturing Plant • Gymnasium
FEATURES • Aluminum Body with Steel Channels for Added Rigidity • Tool-Less Hinged Bottom Ballast Access Doors • Frosted Acrylic or Polycarbonate Lens Options • 95% Enhanced Aluminum Wide Distribution Reflectors (Std),
No Reflectors (Recommended) • High Gloss Polyester White Paint • Riveted Construction and Vented Ballast Channel • V-Clips for Dual Point Chain or Cable Hanging (Std) • Multiple Dimming and Sensor Options to Fully Control
Occupied and Unoccupied Light Levels • 5000K Color Temp (Std) • 5 Year Warranty • ETL Damp Listed • DesignLights Consortium® Qualified (2)
LED SYSTEMBoard (LG Chips) 16 x 56Calculated L70 (TM-21) 93,000 hoursDelivered Lumens 49,507 lmTotal Input Watts 438.5 WLuminaire Efficacy Rating (LER) 112.9 lm/WCorrelated Color Temperature (CCT) 5000 KColor Rendering Index (CRI) > 80Max Ambient Temp 130˚ F (3)
Universal Driver 120-277 V
LED System data above based on HB-400WLED-UNIV-5000K-N(1) LED Lumen Maintenance Estimates based on TM-21 projections for the light source at 25˚C ambient(2) Specific Configurations Listed on DLC. (3) Max ambient temp applies to standard driver installed.
HB 400WLED UNIV 5000K eg: N
Series LED Driver Color Options � HB High Bay 4ft � 400WLED 16x56 Board � UNIV 120-277 Driver � 4000K* � FRL Frosted Acrylic Lens
� 5000K* � PCL Polycarbonate Lens .125” � N* No Reflector (recommended)
*DLC Listed Config. � DIM 0-10V Dimmable Driver � FIOS On/Off Occupancy Sensor Installed � FIOSPC On/Off Occupancy Sensor w/ Photocell � USDC User Selectable Dimming Control � USBD User Select Bi-level Dim w/ Occ. Sensor � BDxx Preset Bi-level Dim Sensor (xx=% eg. 20,30)
� BDxxPC Preset Bi-level Dim Sensor w/ Photocell � DHPC Daylight Harvesting � PC Photocell
**All 347V applications please � SD480** 480V Step Down Transformercontact factory for pricing � LEDBB LED Battery Backup (may reduce max ambient)
� CLD For Below 0˚C/32˚F Environment � CORDx Cord (X = ft)
� QDCx Quick Disconnect Cord (X = ft)
� HB-XX-PAD Y-Toggle Cable System (XX = in)
� WC 11 Ga Wire Cage
REPLACES 1000W MH
www.ilp-inc.com Industrial Lighting Products 407-478-3759
MOUNTING OPTIONS
PREMIUM HIGH BAY
HIGH BAY - 400W LED
• V-Clips for dual point chain or cable hanging (standard)
• Y-Toggle Cable Kit - Includes 2 adjustable cable hangers
• Rigid Center Mount Bracket Kit (RCMBK)
Includes rigid bracket and screws to attach it to the fixture, provides for single point mounting to accept a pendant, hook, or conduit hub (sold separately).
HB-400WLED-UNIV-5000K-N
SUMMARY DATA
PLANE AND CONE DIAGRAM
Photometric values based upon tests performed in compliance with LM-79. IES files can be downloaded at www.ilp-inc.com
LUMINAIRE OUTPUT = 49217 LM120.0V 3.649A 435.9W PF= 0.995
HEMISPHERES TESTED: LOWEREFFICIENCY (Total): 100.0 %EFFICIENCY (Downlight): 100.0 %SPACING CRITERION (0-Deg.): 1.30SPACING CRITERION (90-Deg.): 1.30LUMENS/LAMP: 49271.26NO. OF LAMPS: 1LUMINOUS OPENING: RECTANGULAR Width: 3.04 (Feet) Length: 3.92 Height: 0.00INPUT WATTS: 436
10 20 30 40
50
60
70
80
90
2500
5000
7500
10000
12500
15000
Quadralaterally Symmetric Solid: 0 Degrees Small Dash: 45 Degrees Large Dash: 90 Degrees
44.5
747.08
3.58
RCMBK (shown with hook)
HUB 3/4 CONDUIT
HB-XX-PAD
HOOK
V-Clips
www.ilp-inc.com Industrial Lighting Products 407-478-3759
ORDERING GUIDE:
Project Name:
Fixture tyPe:
LamPs/Board:
cataLog NumBer:
VoLts/Watts:
5 Y E A R W A R RA
NT
Y
PREMIUM HIGH BAY
HIGH BAY FROSTED - 400W LED
SUITABLE APPLICATIONS • Warehouse • Distribution • Manufacturing Plant • Gymnasium
FEATURES • Aluminum Body with Steel Channels for Added Rigidity • Tool-Less Hinged Bottom Ballast Access Doors • Frosted Acrylic Lens (Std), Polycarbonate Lens Optional • 95% Enhanced Aluminum Wide Distribution Reflectors (Std),
No Reflectors (Recommended) • High Gloss Polyester White Paint • Riveted Construction and Vented Ballast Channel • V-Clips for Dual Point Chain or Cable Hanging (Std) • Multiple Dimming and Sensor Options to Fully Control
Occupied and Unoccupied Light Levels • 5000K Color Temp (Std) • 5 Year Warranty • ETL Damp Listed • DesignLights Consortium® Qualified (2)
LED SYSTEMBoard (LG Chips) 16 x 56Calculated L70 (TM-21) 93,000 hoursDelivered Lumens 47,797 lmTotal Input Watts 438.5 WLuminaire Efficacy Rating (LER) 109.0 lm/WCorrelated Color Temperature (CCT) 5000 KColor Rendering Index (CRI) > 80Max Ambient Temp 130˚ F (3)
Universal Driver 120-277 V
LED System data above based on HB-400WLED-UNIV-5000K-N-FRL(1) LED Lumen Maintenance Estimates based on TM-21 projections for the light source at 25˚C ambient(2) Specific Configurations Listed on DLC. (3) Max ambient temp applies to standard driver installed.
HB 400WLED UNIV 5000K FRL
Series LED Driver Color Options � HB High Bay 4ft � 400WLED 16x56 Board � UNIV 120-277 Driver � 4000K* T FRL* Frosted Acrylic Lens
� 5000K* � PCL Polycarbonate Lens .125” � N* No Reflector (recommended)
*DLC Listed Config. � DIM 0-10V Dimmable Driver � FIOS On/Off Occupancy Sensor Installed � FIOSPC On/Off Occupancy Sensor w/ Photocell � USDC User Selectable Dimming Control � USBD User Select Bi-level Dim w/ Occ. Sensor � BDxx Preset Bi-level Dim Sensor (xx=% eg. 20,30)
� BDxxPC Preset Bi-level Dim Sensor w/ Photocell � DHPC Daylight Harvesting � PC Photocell
**All 347V applications please � SD480** 480V Step Down Transformercontact factory for pricing � LEDBB LED Battery Backup (may reduce max ambient)
� CLD For Below 0˚C/32˚F Environment � CORDx Cord (X = ft)
� QDCx Quick Disconnect Cord (X = ft)
� HB-XX-PAD Y-Toggle Cable System (XX = in)
� WC 11 Ga Wire Cage
REPLACES 1000W MH
www.ilp-inc.com Industrial Lighting Products 407-478-3759
MOUNTING OPTIONS
PREMIUM HIGH BAY
HIGH BAY FROSTED - 400W LED HB-400WLED-UNIV-5000K-N-FRL
SUMMARY DATA
PLANE AND CONE DIAGRAM
Photometric values based upon tests performed in compliance with LM-79. IES files can be downloaded at www.ilp-inc.com
LUMINAIRE OUTPUT = 44522 LM120.0V 3.645A 435.3W PF= 0.995
HEMISPHERES TESTED: LOWEREFFICIENCY (Total): 100.0 %EFFICIENCY (Downlight): 100.0 %SPACING CRITERION (0-Deg.): 1.26SPACING CRITERION (90-Deg.): 1.25LUMENS/LAMP: 44563.53NO. OF LAMPS: 1LUMINOUS OPENING: RECTANGULAR Width: 3.04 (Feet) Length: 3.92 Height: 0.00INPUT WATTS: 435.3
10 20 30 40
50
60
70
80
90
2500
5000
7500
10000
12500
15000
Quadralaterally Symmetric Solid: 0 Degrees Small Dash: 45 Degrees Large Dash: 90 Degrees
44.5
747.08
3.58
• V-Clips for dual point chain or cable hanging (standard)
• Y-Toggle Cable Kit - Includes 2 adjustable cable hangers
• Rigid Center Mount Bracket Kit (RCMBK)
Includes rigid bracket and screws to attach it to the fixture, provides for single point mounting to accept a pendant, hook, or conduit hub (sold separately).
RCMBK (shown with hook)
HUB 3/4 CONDUIT
HB-XX-PAD
HOOK
V-Clips
ORDERING GUIDE:
Project Name:
Fixture tyPe:
LamPs/Board:
cataLog NumBer:
VoLts/Watts:
www.ilp-inc.com Industrial Lighting Products 407-478-3759
SUITABLE APPLICATIONS • Coolers / Freezers • Food Preparation • High Bay / Low Bay • Commercial or Industrial Building • Warehouse, Distribution Center,
or Manufacturing Plant
BLEXT 100WLED UNIV 5000K CAL
Series LED Driver Color Options � BLEXT Blizzard EXT � 100WLED 4x56 Board � UNIV 120-277 Driver � 4000K* T CAL* Clear Acrylic Lens
� 5000K* � FRAL Frosted Acrylic Lens � PCL Clear Polycarbonate Lens
*DLC Listed Config. � DIM 0-10V Dimmable Driver � FIOS On/Off Occupancy Sensor Installed � FIOSPC On/Off Occupancy Sensor w/ Photocell � WLOS Wet Location Sensor Installed � USDC User Selectable Dimming Control � USBD User Select Bi-level Dim w/ Occ. Sensor � BDxx Preset Bi-level Dim Sensor (xx=% eg. 20,30)
� BDxxPC Preset Bi-level Dim Sensor w/ Photocell � DHPC Daylight Harvesting � PCxxx Photocell (xxx = Voltage)
**All 347V applications please � SD480** 480V Step Down Transformercontact factory for pricing � LEDBB LED Battery Backup (may reduce max ambient)
� CLD For Below 0˚C/32˚F Environment � CORDWx Wet Location Strain Relief Cord (X = ft)
� HB-XX-PAD Y-Toggle Cable System (XX = in)
� RMBSS Rigid Mounting Beam (SS)
FEATURES • Effective Heat Management System (Std) • Clear Acrylic Lens (Std), Frosted Acrylic Lens (FRAL) or
Clear Polycarbonate Lens (PCL) Available • V-Hooks for Chain or Cable Hanging (Standard) • Optional Rigid Mounting Beam (RMB) allows for:
Secure Ceiling Mount or Dual Pendant Mount • Marine Grade 316 Stainless Steel (Std) or
Optional Secure Locking Plastic Latches/Hardware
• 5 Year Warranty • Fiberglass Body Attributes
- IP65, IP66 & IP67 (Dust Tight, Low Pressure Water Jets, High Pressure Water Jets, and Immerse 1M)
- NEMA4 & NSF Rated Components, 5VA Flame Rating - UL Listed / Wet Locations, (F1) Rated for Outdoor Use
• DesignLights Consortium® Qualified (2)
WET LOCATION
BLIZZARD EXT - 100W LED
LED SYSTEMBoard (LG Chips) 4 x 56Calculated L70 (TM-21) 86,000 hoursDelivered Lumens 12,166 lmTotal Input Watts 109.6 WLuminaire Efficacy Rating (LER) 111.0 lm/WCorrelated Color Temperature (CCT) 5000 KColor Rendering Index (CRI) > 80Max Ambient Temp 122˚ FUniversal Driver 120-277 V
LED System data above based on BLEXT-100WLED-UNIV-5000K-CAL(1) LED Lumen Maintenance Estimates based on TM-21 projections for the light source at 25˚C ambient(2) Specific Configurations Listed on DLC
Shown with RMBSS Option
REPLACES 250W MH5 Y E A R W A R R
AN
TY
www.ilp-inc.com Industrial Lighting Products 407-478-3759
MOUNTING OPTIONS
WET LOCATION
BLIZZARD EXT - 100W LED
Rigid Mounting BeamStraps w/ V-Hook
• V-Hooks (Std) for Dual Point Chain or Cable Hanging • Optional Rigid Mounting Beam allows for:
- Secure Ceiling Mount - Dual Pendant Mount (with 1/2” Conduit Hubs)
• HB-60-18Y-PAD - Y-Paddle Cables
BLEXT-100WLED-UNIV-CAL
SUMMARY DATA
PLANE AND CONE DIAGRAM
Photometric values based upon tests performed in compliance with LM-79. IES files can be downloaded at www.ilp-inc.com
LUMINAIRE OUTPUT = 11762 LM120.1V 0.9174A 109.6W PF= 0.995
HEMISPHERES TESTED: BOTHEFFICIENCY (Total): 100.0 %EFFICIENCY (Downlight): 99.1 %EFFICIENCY (Uplight): 0.9 %CIE CLASSIFICATION: DIRECTSPACING CRITERION (0-Deg.): 1.29
84.37711 :PMAL/SNEMUL 1 :SPMAL FO .ON
LUMINOUS OPENING: RECTANGULAR)teeF( 01.1 :htdiW
Length: 4.1752.0 :thgieH
6.901 :STTAW TUPNI
10 20 30 40
50
60
70
80
90
1000
2000
3000
4000
Quadralaterally Symmetric Solid: 0 Degrees Small Dash: 45 Degrees Large Dash: 90 Degrees
6.0
52.3
52.0
52.0
14.6
HB-60-18Y-PAD
ORDERING GUIDE:
Project Name:
Fixture tyPe:
LamPs/Board:
cataLog NumBer:
VoLts/Watts:
www.ilp-inc.com Industrial Lighting Products 407-478-3759
SUITABLE APPLICATIONS • Coolers / Freezers • Food Preparation • High Bay / Low Bay • Commercial or Industrial Building • Warehouse, Distribution Center,
or Manufacturing Plant
FEATURES • Effective Heat Management System (Std) • Frosted Acrylic Lens (Std), Clear Acrylic Lens (CAL) or
Clear Polycarbonate Lens (PCL) Available • V-Hooks for Chain or Cable Hanging (Standard) • Optional Rigid Mounting Beam (RMB) allows for:
Secure Ceiling Mount or Dual Pendant Mount • Marine Grade 316 Stainless Steel (Std) or
Optional Secure Locking Plastic Latches/Hardware
• 5 Year Warranty • Fiberglass Body Attributes
- IP65, IP66 & IP67 (Dust Tight, Low Pressure Water Jets, High Pressure Water Jets, and Immerse 1M)
- NEMA4 & NSF Rated Components, 5VA Flame Rating - UL Listed / Wet Locations, (F1) Rated for Outdoor Use
• DesignLights Consortium® Qualified (2)
WET LOCATION
BLIZZARD EXT FROSTED - 100W LED
LED SYSTEMBoard (LG Chips) 4 x 56Calculated L70 (TM-21) 86,000 hoursDelivered Lumens 11,596 lmTotal Input Watts 109.6 WLuminaire Efficacy Rating (LER) 105.8 lm/WCorrelated Color Temperature (CCT) 5000 KColor Rendering Index (CRI) > 80Max Ambient Temp 122˚ FUniversal Driver 120-277 V
LED System data above based on BLEXT-100WLED-UNIV-5000K-FRAL(1) LED Lumen Maintenance Estimates based on TM-21 projections for the light source at 25˚C ambient(2) Specific Configurations Listed on DLC
Shown with RMBSS Option
REPLACES 250W MH
BLEXT 100WLED UNIV 5000K CAL
Series LED Driver Color Options � BLEXT Blizzard EXT � 100WLED 4x56 Board � UNIV 120-277 Driver � 4000K* � CAL Clear Acrylic Lens
� 5000K* T FRAL* Frosted Acrylic Lens � PCL Clear Polycarbonate Lens
*DLC Listed Config. � DIM 0-10V Dimmable Driver � FIOS On/Off Occupancy Sensor Installed � FIOSPC On/Off Occupancy Sensor w/ Photocell � WLOS Wet Location Sensor Installed � USDC User Selectable Dimming Control � USBD User Select Bi-level Dim w/ Occ. Sensor � BDxx Preset Bi-level Dim Sensor (xx=% eg. 20,30)
� BDxxPC Preset Bi-level Dim Sensor w/ Photocell � DHPC Daylight Harvesting � PCxxx Photocell (xxx = Voltage)
**All 347V applications please � SD480** 480V Step Down Transformercontact factory for pricing � LEDBB LED Battery Backup (may reduce max ambient)
� CLD For Below 0˚C/32˚F Environment � CORDWx Wet Location Strain Relief Cord (X = ft)
� HB-XX-PAD Y-Toggle Cable System (XX = in)
� RMBSS Rigid Mounting Beam (SS)
5 Y E A R W A R RA
NT
Y
www.ilp-inc.com Industrial Lighting Products 407-478-3759
MOUNTING OPTIONS
WET LOCATION
BLIZZARD EXT FROSTED - 100W LED
Rigid Mounting BeamStraps w/ V-Hook
• V-Hooks (Std) for Dual Point Chain or Cable Hanging • Optional Rigid Mounting Beam allows for:
- Secure Ceiling Mount - Dual Pendant Mount (with 1/2” Conduit Hubs)
• HB-60-18Y-PAD - Y-Paddle Cables
BLEXT-100WLED-UNIV-FRAL
SUMMARY DATA
PLANE AND CONE DIAGRAM
Photometric values based upon tests performed in compliance with LM-79. IES files can be downloaded at www.ilp-inc.com
LUMINAIRE OUTPUT = 11216 LM120.0V 0.9176A 109.6W PF= 0.995
HEMISPHERES TESTED: BOTHEFFICIENCY (Total): 100.0 %EFFICIENCY (Downlight): 96.6 %EFFICIENCY (Uplight): 3.4 %CIE CLASSIFICATION: DIRECTSPACING CRITERION (0-Deg.): 1.26
80.22211 :PMAL/SNEMUL 1 :SPMAL FO .ON
LUMINOUS OPENING: RECTANGULAR)teeF( 01.1 :htdiW
Length: 4.1752.0 :thgieH
6.901 :STTAW TUPNI
10 20 30 40
50
60
70
80
90
1000
2000
3000
4000
Quadralaterally Symmetric Solid: 0 Degrees Small Dash: 45 Degrees Large Dash: 90 Degrees
HB-60-18Y-PAD
6.0
52.3
52.0
52.0
14.6
ORDERING GUIDE:
Project Name:
Fixture tyPe:
LamPs/Board:
cataLog NumBer:
VoLts/Watts:
www.ilp-inc.com Industrial Lighting Products 407-478-3759
SUITABLE APPLICATIONS • Coolers / Freezers • Food Preparation • High Bay / Low Bay • Commercial or Industrial Building • Warehouse, Distribution Center,
or Manufacturing Plant
FEATURES • Effective Heat Management System (Std) • Clear Acrylic Lens (Std), Frosted Acrylic Lens (FRAL) or
Clear Polycarbonate Lens (PCL) Available • V-Hooks for Chain or Cable Hanging (Standard) • Optional Rigid Mounting Beam (RMB) allows for:
Secure Ceiling Mount or Dual Pendant Mount • Marine Grade 316 Stainless Steel (Std) or
Optional Secure Locking Plastic Latches/Hardware
• 5 Year Warranty • Fiberglass Body Attributes
- IP65, IP66 & IP67 (Dust Tight, Low Pressure Water Jets, High Pressure Water Jets, and Immerse 1M)
- NEMA4 & NSF Rated Components, 5VA Flame Rating - UL Listed / Wet Locations, (F1) Rated for Outdoor Use
• DesignLights Consortium® Qualified (2)
WET LOCATION
BLIZZARD EXT - 150W LED
LED SYSTEMBoard (LG Chips) 6 x 56Calculated L70 (TM-21) 86,000 hoursDelivered Lumens 17,430 lmTotal Input Watts 168.9 WLuminaire Efficacy Rating (LER) 103.2 lm/WCorrelated Color Temperature (CCT) 5000 KColor Rendering Index (CRI) > 80Max Ambient Temp 118˚ FUniversal Driver 120-277 V
LED System data above based on BLEXT-150WLED-UNIV-5000K-CAL (1) LED Lumen Maintenance Estimates based on TM-21 projections for the light source at 25˚C ambient(2) Specific Configurations Listed on DLC
Shown with RMBSS Option
REPLACES 400W MH
BLEXT 150WLED UNIV 5000K CAL
Series LED Driver Color Options � BLEXT Blizzard EXT � 150WLED 6x56 Board � UNIV 120-277 Driver � 4000K* T CAL* Clear Acrylic Lens
� 5000K* � FRAL Frosted Acrylic Lens � PCL Clear Polycarbonate Lens
*DLC Listed Config. � DIM 0-10V Dimmable Driver � FIOS On/Off Occupancy Sensor Installed � FIOSPC On/Off Occupancy Sensor w/ Photocell � WLOS Wet Location Sensor Installed � USDC User Selectable Dimming Control � USBD User Select Bi-level Dim w/ Occ. Sensor � BDxx Preset Bi-level Dim Sensor (xx=% eg. 20,30)
� BDxxPC Preset Bi-level Dim Sensor w/ Photocell � DHPC Daylight Harvesting � PCxxx Photocell (xxx = Voltage)
**All 347V applications please � SD480** 480V Step Down Transformercontact factory for pricing � LEDBB LED Battery Backup (may reduce max ambient)
� CLD For Below 0˚C/32˚F Environment � CORDWx Wet Location Strain Relief Cord (X = ft)
� HB-XX-PAD Y-Toggle Cable System (XX = in)
� RMBSS Rigid Mounting Beam (SS)
5 Y E A R W A R RA
NT
Y
www.ilp-inc.com Industrial Lighting Products 407-478-3759
MOUNTING OPTIONS
WET LOCATION
BLIZZARD EXT - 150W LED
Rigid Mounting BeamStraps w/ V-Hook
• V-Hooks (Std) for Dual Point Chain or Cable Hanging • Optional Rigid Mounting Beam allows for:
- Secure Ceiling Mount - Dual Pendant Mount (with 1/2” Conduit Hubs)
• HB-60-18Y-PAD - Y-Paddle Cables
BLEXT-150WLED-UNIV-CAL
SUMMARY DATA
PLANE AND CONE DIAGRAM
Photometric values based upon tests performed in compliance with LM-79. IES files can be downloaded at www.ilp-inc.com
LUMINAIRE OUTPUT = 16854 LM120.0V 1.418A 168.9W PF= 0.992
HEMISPHERES TESTED: BOTHEFFICIENCY (Total): 100.0 %EFFICIENCY (Downlight): 98.5 %EFFICIENCY (Uplight): 1.5 %CIE CLASSIFICATION: DIRECTSPACING CRITERION (0-Deg.): 1.29
30.96861 :PMAL/SNEMUL 1 :SPMAL FO .ON
LUMINOUS OPENING: RECTANGULAR)teeF( 01.1 :htdiW
Length: 4.1752.0 :thgieH
9.861 :STTAW TUPNI
10 20 30 40
50
60
70
80
90
1000
2000
3000
4000
5000
Quadralaterally Symmetric Solid: 0 Degrees Small Dash: 45 Degrees Large Dash: 90 Degrees
HB-60-18Y-PAD
6.0
52.3
52.0
52.0
14.6
ORDERING GUIDE:
Project Name:
Fixture tyPe:
LamPs/Board:
cataLog NumBer:
VoLts/Watts:
www.ilp-inc.com Industrial Lighting Products 407-478-3759
SUITABLE APPLICATIONS • Coolers / Freezers • Food Preparation • High Bay / Low Bay • Commercial or Industrial Building • Warehouse, Distribution Center,
or Manufacturing Plant
FEATURES • Effective Heat Management System (Std) • Frosted Acrylic Lens (Std), Clear Acrylic Lens (CAL) or
Clear Polycarbonate Lens (PCL) Available • V-Hooks for Chain or Cable Hanging (Standard) • Optional Rigid Mounting Beam (RMB) allows for:
Secure Ceiling Mount or Dual Pendant Mount • Marine Grade 316 Stainless Steel (Std) or
Optional Secure Locking Plastic Latches/Hardware
• 5 Year Warranty • Fiberglass Body Attributes
- IP65, IP66 & IP67 (Dust Tight, Low Pressure Water Jets, High Pressure Water Jets, and Immerse 1M)
- NEMA4 & NSF Rated Components, 5VA Flame Rating - UL Listed / Wet Locations, (F1) Rated for Outdoor Use
• DesignLights Consortium® Qualified (2)
WET LOCATION
BLIZZARD EXT FROSTED - 150W LED
LED SYSTEMBoard (LG Chips) 6 x 56Calculated L70 (TM-21) 86,000 hoursDelivered Lumens 16,941 lmTotal Input Watts 168.9 WLuminaire Efficacy Rating (LER) 100.3 lm/WCorrelated Color Temperature (CCT) 5000 KColor Rendering Index (CRI) > 80Max Ambient Temp 118˚ FUniversal Driver 120-277 V
LED System data above based on BLEXT-150WLED-UNIV-5000K-FRAL(1) LED Lumen Maintenance Estimates based on TM-21 projections for the light source at 25˚C ambient(2) Specific Configurations Listed on DLC
Shown with RMBSS Option
REPLACES 400W MH
BLEXT 150WLED UNIV 5000K CAL
Series LED Driver Color Options � BLEXT Blizzard EXT � 150WLED 6x56 Board � UNIV 120-277 Driver � 4000K* � CAL Clear Acrylic Lens
� 5000K* T FRAL* Frosted Acrylic Lens � PCL Clear Polycarbonate Lens
*DLC Listed Config. � DIM 0-10V Dimmable Driver � FIOS On/Off Occupancy Sensor Installed � FIOSPC On/Off Occupancy Sensor w/ Photocell � WLOS Wet Location Sensor Installed � USDC User Selectable Dimming Control � USBD User Select Bi-level Dim w/ Occ. Sensor � BDxx Preset Bi-level Dim Sensor (xx=% eg. 20,30)
� BDxxPC Preset Bi-level Dim Sensor w/ Photocell � DHPC Daylight Harvesting � PCxxx Photocell (xxx = Voltage)
**All 347V applications please � SD480** 480V Step Down Transformercontact factory for pricing � LEDBB LED Battery Backup (may reduce max ambient)
� CLD For Below 0˚C/32˚F Environment � CORDWx Wet Location Strain Relief Cord (X = ft)
� HB-XX-PAD Y-Toggle Cable System (XX = in)
� RMBSS Rigid Mounting Beam (SS)
5 Y E A R W A R RA
NT
Y
www.ilp-inc.com Industrial Lighting Products 407-478-3759
MOUNTING OPTIONS
WET LOCATION
BLIZZARD EXT FROSTED - 150W LED
Rigid Mounting BeamStraps w/ V-Hook
• V-Hooks (Std) for Dual Point Chain or Cable Hanging • Optional Rigid Mounting Beam allows for:
- Secure Ceiling Mount - Dual Pendant Mount (with 1/2” Conduit Hubs)
• HB-60-18Y-PAD - Y-Paddle Cables
HB-60-18Y-PAD
BLEXT-150WLED-UNIV-FRAL
SUMMARY DATA
PLANE AND CONE DIAGRAM
Photometric values based upon tests performed in compliance with LM-79. IES files can be downloaded at www.ilp-inc.com
LUMINAIRE OUTPUT = 16386 LM120.1V 1.418A 168.9W PF= 0.992
HEMISPHERES TESTED: BOTHEFFICIENCY (Total): 100.0 %EFFICIENCY (Downlight): 96.5 %EFFICIENCY (Uplight): 3.5 %CIE CLASSIFICATION: DIRECTSPACING CRITERION (0-Deg.): 1.25
54.79361 :PMAL/SNEMUL 1 :SPMAL FO .ON
LUMINOUS OPENING: RECTANGULAR)teeF( 01.1 :htdiW
Length: 4.1752.0 :thgieH
9.861 :STTAW TUPNI
10 20 30 40
50
60
70
80
90
1000
2000
3000
4000
5000
Quadralaterally Symmetric Solid: 0 Degrees Small Dash: 45 Degrees Large Dash: 90 Degrees
6.0
52.3
52.0
52.0
14.6
ORDERING GUIDE:
Project Name:
Fixture tyPe:
LamPs/Board:
cataLog NumBer:
VoLts/Watts:
www.ilp-inc.com Industrial Lighting Products 407-478-3759
SUITABLE APPLICATIONS • Coolers / Freezers • Food Preparation • High Bay / Low Bay • Commercial or Industrial Building • Warehouse, Distribution Center,
or Manufacturing Plant
FEATURES • Effective Heat Management System (Std) • Clear Acrylic Lens (Std), Frosted Acrylic Lens (FRAL) or
Clear Polycarbonate Lens (PCL) Available • V-Hooks for Chain or Cable Hanging (Standard) • Optional Rigid Mounting Beam (RMB) allows for:
Secure Ceiling Mount or Dual Pendant Mount • Marine Grade 316 Stainless Steel (Std) or
Optional Secure Locking Plastic Latches/Hardware
• 5 Year Warranty • Fiberglass Body Attributes
- IP65, IP66 & IP67 (Dust Tight, Low Pressure Water Jets, High Pressure Water Jets, and Immerse 1M)
- NEMA4 & NSF Rated Components, 5VA Flame Rating - UL Listed / Wet Locations, (F1) Rated for Outdoor Use
• DesignLights Consortium® Qualified (2)
WET LOCATION
BLIZZARD EXT - 200W LED
LED SYSTEMBoard (LG Chips) 8 x 56Calculated L70 (TM-21) 86,000 hoursDelivered Lumens 22,734 lmTotal Input Watts 218.6 WLuminaire Efficacy Rating (LER) 104.0 lm/WCorrelated Color Temperature (CCT) 5000 KColor Rendering Index (CRI) > 80Max Ambient Temp 113˚ FUniversal Driver 120-277 V
LED System data above based on BLEXT-200WLED-UNIV-5000K-CAL(1) LED Lumen Maintenance Estimates based on TM-21 projections for the light source at 25˚C ambient(2) Specific Configurations Listed on DLC
Shown with RMBSS Option
REPLACES 400W MH
BLEXT 200WLED UNIV 5000K CAL
Series LED Driver Color Options � BLEXT Blizzard EXT � 200WLED 8x56 Board � UNIV 120-277 Driver � 4000K* T CAL* Clear Acrylic Lens
� 5000K* � FRAL Frosted Acrylic Lens � PCL Clear Polycarbonate Lens
*DLC Listed Config. � DIM 0-10V Dimmable Driver � FIOS On/Off Occupancy Sensor Installed � FIOSPC On/Off Occupancy Sensor w/ Photocell � WLOS Wet Location Sensor Installed � USDC User Selectable Dimming Control � USBD User Select Bi-level Dim w/ Occ. Sensor � BDxx Preset Bi-level Dim Sensor (xx=% eg. 20,30)
� BDxxPC Preset Bi-level Dim Sensor w/ Photocell � DHPC Daylight Harvesting � PCxxx Photocell (xxx = Voltage)
**All 347V applications please � SD480** 480V Step Down Transformercontact factory for pricing � LEDBB LED Battery Backup (may reduce max ambient)
� CLD For Below 0˚C/32˚F Environment � CORDWx Wet Location Strain Relief Cord (X = ft)
� HB-XX-PAD Y-Toggle Cable System (XX = in)
� RMBSS Rigid Mounting Beam (SS)
5 Y E A R W A R RA
NT
Y
www.ilp-inc.com Industrial Lighting Products 407-478-3759
MOUNTING OPTIONS
WET LOCATION
BLIZZARD EXT - 200W LED
Rigid Mounting BeamStraps w/ V-Hook
• V-Hooks (Std) for Dual Point Chain or Cable Hanging • Optional Rigid Mounting Beam allows for:
- Secure Ceiling Mount - Dual Pendant Mount (with 1/2” Conduit Hubs)
• HB-60-18Y-PAD - Y-Paddle Cables
BLEXT-200WLED-UNIV-CAL
SUMMARY DATA
PLANE AND CONE DIAGRAM
Photometric values based upon tests performed in compliance with LM-79. IES files can be downloaded at www.ilp-inc.com
LUMINAIRE OUTPUT = 21989 LM120.0V 1.832A 218.6W PF= 0.995
HEMISPHERES TESTED: BOTHEFFICIENCY (Total): 100.0 %EFFICIENCY (Downlight): 98.6 %EFFICIENCY (Uplight): 1.4 %CIE CLASSIFICATION: DIRECTSPACING CRITERION (0-Deg.): 1.29
11.70022 :PMAL/SNEMUL 1 :SPMAL FO .ON
LUMINOUS OPENING: RECTANGULAR)teeF( 01.1 :htdiW
Length: 4.1752.0 :thgieH
6.812 :STTAW TUPNI
10 20 30 40
50
60
70
80
90
1500
3000
4500
6000
7500
Quadralaterally Symmetric Solid: 0 Degrees Small Dash: 45 Degrees Large Dash: 90 Degrees
HB-60-18Y-PAD
6.0
52.3
52.0
52.0
14.6
ORDERING GUIDE:
Project Name:
Fixture tyPe:
LamPs/Board:
cataLog NumBer:
VoLts/Watts:
www.ilp-inc.com Industrial Lighting Products 407-478-3759
SUITABLE APPLICATIONS • Coolers / Freezers • Food Preparation • High Bay / Low Bay • Commercial or Industrial Building • Warehouse, Distribution Center,
or Manufacturing Plant
FEATURES • Effective Heat Management System (Std) • Frosted Acrylic Lens (Std), Clear Acrylic Lens (CAL) or
Clear Polycarbonate Lens (PCL) Available • V-Hooks for Chain or Cable Hanging (Standard) • Optional Rigid Mounting Beam (RMB) allows for:
Secure Ceiling Mount or Dual Pendant Mount • Marine Grade 316 Stainless Steel (Std) or
Optional Secure Locking Plastic Latches/Hardware
• 5 Year Warranty • Fiberglass Body Attributes
- IP65, IP66 & IP67 (Dust Tight, Low Pressure Water Jets, High Pressure Water Jets, and Immerse 1M)
- NEMA4 & NSF Rated Components, 5VA Flame Rating - UL Listed / Wet Locations, (F1) Rated for Outdoor Use
• DesignLights Consortium® Qualified (2)
WET LOCATION
BLIZZARD EXT FROSTED - 200W LED
LED SYSTEMBoard (LG Chips) 8 x 56Calculated L70 (TM-21) 86,000 hoursDelivered Lumens 22,122 lmTotal Input Watts 218.6 WLuminaire Efficacy Rating (LER) 101.2 lm/WCorrelated Color Temperature (CCT) 5000 KColor Rendering Index (CRI) > 80Max Ambient Temp 113˚ FUniversal Driver 120-277 V
LED System data above based on BLEXT-200WLED-UNIV-5000K-FRAL (1) LED Lumen Maintenance Estimates based on TM-21 projections for the light source at 25˚C ambient(2) Specific Configurations Listed on DLC
Shown with RMBSS Option
REPLACES 400W MH
BLEXT 200WLED UNIV 5000K CAL
Series LED Driver Color Options � BLEXT Blizzard EXT � 200WLED 8x56 Board � UNIV 120-277 Driver � 4000K* � CAL Clear Acrylic Lens
� 5000K* T FRAL* Frosted Acrylic Lens � PCL Clear Polycarbonate Lens
*DLC Listed Config. � DIM 0-10V Dimmable Driver � FIOS On/Off Occupancy Sensor Installed � FIOSPC On/Off Occupancy Sensor w/ Photocell � WLOS Wet Location Sensor Installed � USDC User Selectable Dimming Control � USBD User Select Bi-level Dim w/ Occ. Sensor � BDxx Preset Bi-level Dim Sensor (xx=% eg. 20,30)
� BDxxPC Preset Bi-level Dim Sensor w/ Photocell � DHPC Daylight Harvesting � PCxxx Photocell (xxx = Voltage)
**All 347V applications please � SD480** 480V Step Down Transformercontact factory for pricing � LEDBB LED Battery Backup (may reduce max ambient)
� CLD For Below 0˚C/32˚F Environment � CORDWx Wet Location Strain Relief Cord (X = ft)
� HB-XX-PAD Y-Toggle Cable System (XX = in)
� RMBSS Rigid Mounting Beam (SS)
5 Y E A R W A R RA
NT
Y
www.ilp-inc.com Industrial Lighting Products 407-478-3759
MOUNTING OPTIONS
WET LOCATION
BLIZZARD EXT FROSTED - 200W LED
Rigid Mounting BeamStraps w/ V-Hook
• V-Hooks (Std) for Dual Point Chain or Cable Hanging • Optional Rigid Mounting Beam allows for:
- Secure Ceiling Mount - Dual Pendant Mount (with 1/2” Conduit Hubs)
• HB-60-18Y-PAD - Y-Paddle Cables
HB-60-18Y-PAD
BLEXT-200WLED-UNIV-FRAL
SUMMARY DATA
PLANE AND CONE DIAGRAM
Photometric values based upon tests performed in compliance with LM-79. IES files can be downloaded at www.ilp-inc.com
LUMINAIRE OUTPUT = 22149 LM120.0V 1.832A 218.6W PF= 0.995
HEMISPHERES TESTED: BOTHEFFICIENCY (Total): 100.0 %EFFICIENCY (Downlight): 96.1 %EFFICIENCY (Uplight): 3.9 %CIE CLASSIFICATION: DIRECTSPACING CRITERION (0-Deg.): 1.25
21.27122 :PMAL/SNEMUL 1 :SPMAL FO .ON
LUMINOUS OPENING: RECTANGULAR)teeF( 01.1 :htdiW
Length: 4.1721.0 :thgieH
6.812 :STTAW TUPNI
10 20 30 40
50
60
70
80
90
1500
3000
4500
6000
7500
Quadralaterally Symmetric Solid: 0 Degrees Small Dash: 45 Degrees Large Dash: 90 Degrees
6.0
52.3
52.0
52.0
14.6
www.ilp-inc.com Industrial Lighting Products 407-478-3759
ORDERING GUIDE:
Project Name:
Fixture tyPe:
LamPs/Board:
cataLog NumBer:
VoLts/Watts:
LED System data above based on WTPG-35WLED-UNIV-5000K-RAFL (1) LED Lumen Maintenance Estimates based on TM-21 projections for the light source at 25˚C ambient
WTPG 35WLED UNIV 5000K RAFL
Series LED Driver Color Options � WTPG 2ft Parking Garage � 35WLED 2x56 Board � UNIV 120-277 Driver � 4000K � RCPL Ribbed Clear Polycarbonate Lens
� 5000K* T RAFL* Ribbed Acrylic Frosted Lens � CORDWx Wet Location Strain Relief Cord (X = ft)
*DLC Listed Config. � PLUGx Plug (X = Type, eg. L715P)
� SS Stainless Steel Latches � TPS Tamper Proof Screws � DIM 0-10V Dimmable Driver � FIOS On/Off Occupancy Sensor Installed � FIOSPC On/Off Occupancy Sensor w/ Photocell � WLOS Wet Location Sensor Installed � USDC User Selectable Dimming Control � USBD User Select Bi-level Dim w/ Occ. Sensor � BDxx Preset Bi-level Dim Sensor (xx=% eg. 20,30)
� BDxxPC Preset Bi-level Dim Sensor w/ Photocell � DHPC Daylight Harvesting � PCxxx Photocell (xxx = Voltage)
PARKING GARAGE
2FT AMAZON PG - 35W LED
SUITABLE APPLICATIONS • Parking Garage • Food Processing and Preparation
(SS Latches) • Pool Areas (SS Latches) • Car Washes (SS Latches)
FEATURES • 2 Foot Enclosure Suitable for Wall or Ceiling Mount • Special Wide Throw Distribution Reflector System • Impact Resistant, Linear Ribbed Acrylic Frosted Lens (RAFL)
Standard, Linear Ribbed Clear Polycarbonate Lens Optional • Continuous Poured, Closed Cell Polyurethane Gasket • Stainless Steel Mounting Brackets for Drill Free Mounting • Polycarbonate Latches* (Std), Stainless Steel (SS) Optional • Tamper Proof Screws (TPS) Optional
• 5 Year Warranty • Fiberglass Body Attributes
- IP65, IP66 & IP67 (Dust Tight, Low Pressure Water Jets, High Pressure Water Jets, and Immerse 1M)
- NEMA4 & NSF Rated Components, 5VA Flame Rating - UL Listed / Wet Locations, (F1) Rated for Outdoor Use
• DesignLights Consortium® Qualified (2)
LED SYSTEMBoard (LG Chips) 2 x 56Calculated L70 (TM-21) 84,000 hoursDelivered Lumens 3,540 lmTotal Input Watts 36.08 WLuminaire Efficacy Rating (LER) 98.1 lm/WCorrelated Color Temperature (CCT) 5000 KColor Rendering Index (CRI) > 80Max Ambient Temp 113˚ FUniversal Driver 120-277 V
*Stainless Steel latches are recommended for the following applications: swimming pools due to chlorine, food processing due to cleaning chemicals, car washes due to chemicals used, agriculture due to ammonia
REPLACES 150W MH5 Y E A R W A R R
AN
TY
www.ilp-inc.com Industrial Lighting Products 407-478-3759
MOUNTING OPTIONS
WTPG-35WLED-UNIV
SUMMARY DATA
PLANE AND CONE DIAGRAM
Photometric values based upon tests performed in compliance with LM-79. IES files can be downloaded at www.ilp-inc.com
[LAMPCAT]N/A. LUMINAIRE OUTPUT = 3413 LMS[OTHER]120.0V 0.3020A 35.94W PF= 0.992
HEMISPHERES TESTED: BOTHEFFICIENCY (Total): 100.0 %EFFICIENCY (Downlight): 88.2 %EFFICIENCY (Uplight): 11.8 %CIE CLASSIFICATION: SEMI-DIRECTSPACING CRITERION (0-Deg.): 1.22SPACING CRITERION (90-Deg.): 2.00
831.3143 :PMAL/SNEMULLUMINOUS OPENING: RECTANGULAR
)teeF( 05.0 :htdiWLength: 2.25
71.0 :thgieH 1.63 :STTAW TUPNI
10 20 30 40
50
60
70
80
90
100 110 120 130
150
300
450
600
Quadralaterally Symmetric Solid: 0 Degrees Small Dash: 45 Degrees Large Dash: 90 Degrees
2FT AMAZON PG - 35W LEDPARKING GARAGE
Lineal Ribbed Diffuser 2’ Length
Length Width Depth
Lineal Ribbed Diffuser
WTPG
27.24” 6.40” 4.25”
Drill-Free Stainless Steel Mounting Brackets
• SS Mounting Brackets for drill-free surface mounting (2 brackets standard)
• Fixture Mounting Box (FMB) - Includes rigid box to attach to the fixture, provides for single point mounting to accept a pendant, hook, or conduit hub (sold separately).
FMB HUB 3/4 CONDUIT
HOOK
www.ilp-inc.com Industrial Lighting Products 407-478-3759
ORDERING GUIDE:
Project Name:
Fixture tyPe:
LamPs/Board:
cataLog NumBer:
VoLts/Watts:
WTPG4 70WLED UNIV 5000K RAFL
Series LED Driver Color Options � WTPG4 4ft Amazon � 70WLED 4x56 Boards � UNIV 120-277 Driver � 4000K � RCPL Ribbed Clear Polycarbonate Lens
� 5000K* T RAFL* Ribbed Acrylic Frosted Lens � DPCL Deep Clear Lens
*DLC Listed Config. � DPFL Deep Frosted Lens � CORDWx Wet Location Strain Relief Cord (X = ft)
� PLUGx Plug (X = Type, eg. L715P)
� SS Stainless Steel Latches � TPS Tamper Proof Screws � DIM 0-10V Dimmable Driver � LEDBB LED Battery Backup (may reduce max ambient)
� FIOS On/Off Occupancy Sensor Installed � FIOSPC On/Off Occupancy Sensor w/ Photocell � WLOS Wet Location Sensor Installed � USDC User Selectable Dimming Control � USBD User Select Bi-level Dim w/ Occ. Sensor � BDxx Preset Bi-level Dim Sensor (xx=% eg. 20,30)
� BDxxPC Preset Bi-level Dim Sensor w/ Photocell � DHPC Daylight Harvesting � PCxxx Photocell (xxx = Voltage)
WET LOCATION
4FT AMAZON PG - 70W LED
SUITABLE APPLICATIONS • Food Processing and Preparation
(SS Latches) • Pool Areas (SS Latches) • Car Washes (SS Latches) • Low Bay Fixtures for Commercial
and Industrial Buildings
FEATURES • 4 Foot Enclosure Suitable for Wall or Ceiling Mount • Special Wide Throw Distribution Reflector System • Impact Resistant, Linear Ribbed Acrylic Frosted Lens (RAFL)
Standard, Linear Ribbed Clear Polycarbonate Lens Optional • Continuous Poured, Closed Cell Polyurethane Gasket • Stainless Steel Mounting Brackets for Drill Free Mounting • Polycarbonate Latches* (Std), Stainless Steel (SS) Optional • Tamper Proof Screws (TPS) Optional
• 5 Year Warranty • Fiberglass Body Attributes
- IP65, IP66 & IP67 (Dust Tight, Low Pressure Water Jets, High Pressure Water Jets, and Immerse 1M)
- NEMA4 & NSF Rated Components, 5VA Flame Rating - UL Listed / Wet Locations, (F1) Rated for Outdoor Use
• DesignLights Consortium® Qualified (2)
LED SYSTEMBoard (LG Chips) 4 x 56Calculated L70 (TM-21) 85,000 hoursDelivered Lumens 6,952 lmTotal Input Watts 73.77 WLuminaire Efficacy Rating (LER) 94.2 lm/WCorrelated Color Temperature (CCT) 5000 KColor Rendering Index (CRI) > 80Max Ambient Temp 112˚ FUniversal Driver 120-277 V
*Stainless Steel latches are recommended for the following applications: swimming pools due to chlorine, food processing due to cleaning chemicals, car washes due to chemicals used, agriculture due to ammonia
REPLACES 250W MH
LED System data above based on WTPG4-70WLED-UNIV-5000K-RAFL (1) LED Lumen Maintenance Estimates based on TM-21 projections for the light source at 25˚C ambient
5 Y E A R W A R RA
NT
Y
www.ilp-inc.com Industrial Lighting Products 407-478-3759
MOUNTING OPTIONS
WTPG4-70-WLED-UNIV-RAFL
SUMMARY DATA
PLANE AND CONE DIAGRAM
Photometric values based upon tests performed in compliance with LM-79. IES files can be downloaded at www.ilp-inc.com
LUMINAIRE OUTPUT = 6797 LMS120.0V 0.6187A 73.63W PF=0.992
HEMISPHERES TESTED: BOTHEFFICIENCY (Total): 100.0 %EFFICIENCY (Downlight): 85.6 %EFFICIENCY (Uplight): 14.4 %CIE CLASSIFICATION: SEMI-DIRECTSPACING CRITERION (0-Deg.): 1.29SPACING CRITERION (90-Deg.): 1.95
563.5086 :PMAL/SNEMUL LUMINOUS OPENING: RECTANGULAR
)teeF( 05.0 :htdiWLength: 4.25
90.0 :thgieH 6.37 :STTAW TUPNI
10 20 30 40
50
60
70
80
90
100 110 120 130 140 150 160 170
200
200
400
600
800
1000
1200
Quadralaterally Symmetric Solid: 0 Degrees Small Dash: 45 Degrees Large Dash: 90 Degrees
4FT AMAZON PG - 70W LEDWET LOCATION
Lineal Ribbed Diffuser 4’ and 8’ Lengths
Frosted Lens 4’ and 8’ Lengths
Nominal Length Width Length Depth
Lineal Ribbed Diffuser
Wide (2 Light)
4’ 6.40” 51.37” 4.25”
8’ 6.40” 99.50” 4.25”
Frosted Lens
4’ 6.40” 51.37” 5.63”
8’ 6.40” 99.50” 5.63”
Drill-Free Stainless Steel Mounting Brackets
• SS Mounting Brackets for drill-free surface mounting (2 brackets standard)
• Fixture Mounting Box (FMB) - Includes rigid box to attach to the fixture, provides for single point mounting to accept a pendant, hook, or conduit hub (sold separately).
FMB HUB 3/4 CONDUIT
HOOK
www.ilp-inc.com Industrial Lighting Products 407-478-3759
ORDERING GUIDE:
Project Name:
Fixture tyPe:
LamPs/Board:
cataLog NumBer:
VoLts/Watts:
5 Y E A R W A R RA
NT
Y
CP 40WLED UNIV 5000K eg: QMB
Series LED Driver Color Options � CP Low Profile Canopy � 40WLED 4x6 Board � UNIV 120-277 Driver � 3000K* � CORDx Cord (X = ft)
� 4000K � PLUGx Plug (X = Type, eg. L715P)
� 5000K** � SD480 480V Step Down Transformer � QMB Quick-Mount Bracket (details on back)
� DIM 0-10V Dimmable Driver � FIOS Factory Installed Occupancy Sensor � FIOSPC On/Off Occupancy Sensor w/ Photocell � WLOS Wet Location Sensor Installed � USDC User Selectable Dimming Control � USBD User Select Bi-level Dim w/ Occ. Sensor � BDxx Bi-level Dimming (xx=% - eg. 10%, 20%, 30%...)
� BDxxPC Bi-level Dimming with Photocell � DHPC Daylight Harvesting � PCxxx Photocell (xxx = Voltage)
LOW PROFILE CANOPY - 40W LEDPARKING GARAGE
FEATURES • Die Cast Aluminum Housing • ½˝ Coin Plugs with O-rings for Conduit & Photocell
on Two Sides & Back • Textured Architectural Bronze Powdercoat Finish
Over a Chromate Conversion Coating • Mount Directly Over a 4˝ Recessed Outlet Box,
or Quick-Mount Bracket Option • Multiple Dimming and Sensor Options to Fully Control
Occupied and Unoccupied Light Levels • Custom Colors Available Upon Request • Constructed to meet IP66 Standards • 5 Year Warranty • ETL Listed for Wet Locations • DesignLights Consortium® Qualified (2)
SUITABLE APPLICATIONS • Parking Garage
• Freezers
• Outdoor Areas
LED SYSTEMBoard (CREE Chips) 4 x 6Calculated L70 (TM-21) 323,000 hoursDelivered Lumens 3,765 lmTotal Input Watts 42.60 WLuminaire Efficacy Rating (LER) 88.40 lm/WCorrelated Color Temperature (CCT) 5000 KColor Rendering Index (CRI) 77.00Max Ambient Temp 116˚ FUniversal Driver 120-277 V
*Call for Availability**DLC Listed Configuration
Shown with USDC Option
REPLACES 150W MH
LED System data above based on CP-40WLED-UNIV-5000K(1) LED Lumen Maintenance Estimates based on TM-21 projections for the light source at 25˚C ambient(2) Specific Configurations Listed on DLC.
www.ilp-inc.com Industrial Lighting Products 407-478-3759
MOUNTING OPTIONS
LOW PROFILE CANOPY - 40WPARKING GARAGE
12 3
/8”
12 3/8”
11 1/2”
4 1/4”
QMBT-Hinged Quick-Mount Bracket, 16 ga Galvanized Steel, Surface Mount or Over Recessed Electrical Box.
CP-40WLED-UNIV
SUMMARY DATA
PLANE AND CONE DIAGRAM
Photometric values based upon tests performed in compliance with LM-79. IES files can be downloaded at www.ilp-inc.com
LUMINAIRE OUTPUT = 3762 LMS120VAC, 356.89mA 42.595W, 0.9943PF
HEMISPHERES TESTED: BOTHEFFICIENCY (Total): 100.0 %EFFICIENCY (Downlight): 99.9 %EFFICIENCY (Uplight): 0.1 %CIE CLASSIFICATION: DIRECTSPACING CRITERION (0-Deg.): 3.13SPACING CRITERION (90-Deg.): 3.16
368.1773 :PMAL/SNEMUL 1 :SPMAL FO .ON
LUMINOUS OPENING: RECTANGULAR)teeF( 64.0 :htdiW
Length: 0.5800.0 :thgieH
6.24 :STTAW TUPNI
10 20 30 40
50
60
70
80
90
200
400
600
800
1000
1200
1400
Quadralaterally Symmetric Solid: 0 Degrees Small Dash: 45 Degrees Large Dash: 90 Degrees
www.ilp-inc.com Industrial Lighting Products 407-478-3759
ORDERING GUIDE:
Project Name:
Fixture tyPe:
LamPs/Board:
cataLog NumBer:
VoLts/Watts:
5 Y E A R W A R RA
NT
Y
LOW PROFILE CANOPY - 60W LEDPARKING GARAGE
CP 60WLED UNIV 5000K eg: QMB
Series LED Driver Color Options � CP Low Profile Canopy � 60WLED 4x6 Board � UNIV 120-277 Driver � 3000K* � CORDx Cord (X = ft)
� 4000K � PLUGx Plug (X = Type, eg. L715P)
� 5000K** � SD480 480V Step Down Transformer � QMB Quick-Mount Bracket (details on back)
� DIM 0-10V Dimmable Driver � FIOS Factory Installed Occupancy Sensor � FIOSPC On/Off Occupancy Sensor w/ Photocell � WLOS Wet Location Sensor Installed � USDC User Selectable Dimming Control � USBD User Select Bi-level Dim w/ Occ. Sensor � BDxx Bi-level Dimming (xx=% - eg. 10%, 20%, 30%...)
� BDxxPC Bi-level Dimming with Photocell � DHPC Daylight Harvesting � PCxxx Photocell (xxx = Voltage)
FEATURES • Die Cast Aluminum Housing • ½˝ Coin Plugs with O-rings for Conduit & Photocell
on Two Sides & Back • Textured Architectural Bronze Powdercoat Finish
Over a Chromate Conversion Coating • Mount Directly Over a 4˝ Recessed Outlet Box,
or Quick-Mount Bracket Option • Multiple Dimming and Sensor Options to Fully Control
Occupied and Unoccupied Light Levels • Custom Colors Available Upon Request • Constructed to meet IP66 Standards • 5 Year Warranty • ETL Listed for Wet Locations • DesignLights Consortium® Qualified (2)
SUITABLE APPLICATIONS • Parking Garage
• Freezers
• Outdoor Areas
LED SYSTEMBoard (CREE Chips) 4 x 6Calculated L70 (TM-21) 76,000 hoursDelivered Lumens 4,945 lmTotal Input Watts 65.97 WLuminaire Efficacy Rating (LER) 74.96 lm/WCorrelated Color Temperature (CCT) 5000 KColor Rendering Index (CRI) 77.3Max Ambient Temp 100˚ FUniversal Driver 120-277 V
*Call for Availability**DLC Listed Configuration
Shown with USDC Option
REPLACES 175W MH
LED System data above based on CP-60WLED-UNIV-5000K(1) LED Lumen Maintenance Estimates based on TM-21 projections for the light source at 25˚C ambient(2) Specific Configurations Listed on DLC.
www.ilp-inc.com Industrial Lighting Products 407-478-3759
MOUNTING OPTIONS
LOW PROFILE CANOPY - 60WPARKING GARAGE
12 3
/8”
12 3/8”
11 1/2”
4 1/4”
CP-60WLED-UNIV
SUMMARY DATA
PLANE AND CONE DIAGRAM
Photometric values based upon tests performed in compliance with LM-79. IES files can be downloaded at www.ilp-inc.com
LUMINAIRE OUTPUT = 4941 LMS120VAC, 550.99mA 65.965W, 0.9969PF
HEMISPHERES TESTED: BOTHEFFICIENCY (Total): 100.0 %EFFICIENCY (Downlight): 99.9 %EFFICIENCY (Uplight): 0.1 %CIE CLASSIFICATION: DIRECTSPACING CRITERION (0-Deg.): 3.12SPACING CRITERION (90-Deg.): 3.19
193.5594 :PMAL/SNEMUL 1 :SPMAL FO .ON
LUMINOUS OPENING: RECTANGULAR)teeF( 64.0 :htdiW
Length: 0.5800.0 :thgieH 66 :STTAW TUPNI
10 20 30 40
50
60
70
80
90
250
500
750
1000
1250
1500
Quadralaterally Symmetric Solid: 0 Degrees Small Dash: 45 Degrees Large Dash: 90 Degrees
QMBT-Hinged Quick-Mount Bracket, 16 ga Galvanized Steel, Surface Mount or Over Recessed Electrical Box.
www.ilp-inc.com Industrial Lighting Products 407-478-3759
ORDERING GUIDE:
Project Name:
Fixture tyPe:
LamPs/Board:
cataLog NumBer:
VoLts/Watts:
5 Y E A R W A R RA
NT
Y
FEATURES • Die Cast Aluminum Housing • Hinged Full Cutoff Front Frame • ½˝ Coin Plugs with O-rings for Conduit & Photocell • Textured Architectural Bronze Powdercoat Finish
Over a Chromate Conversion Coating • Forward Throw Optic Lens • Cast-in Template for Mounting Directly Over
a 4˝ Recessed Outlet Box • 40W, 5000K (Std) • Listed for Wet Locations • Meets Dark Sky Requirements • Custom Colors Available Upon Request • DesignLights Consortium® Qualified (2)
LED SYSTEMBoard (CREE Chips) 4 x 6Calculated L70 (TM-21) 380,000 hoursDelivered Lumens 3,602 lmTotal Input Watts 42.43 WLuminaire Efficacy Rating (LER) 84.89 lm/WCorrelated Color Temperature (CCT) 5000 KColor Rendering Index (CRI) 76.4 Max Ambient Temp 125˚ FUniversal Driver 120-277 V
SUITABLE APPLICATIONS • Parking lots • Buildings • General area lighting
WPCS 40WLED UNIV 5000K eg: WPC15WG
Series LED Driver Color Options � WPCS Full Cutoff Wall Pack � 40WLED 4x6 Board � UNIV 120-277 Driver � 4000K � WPC15Y Adjustable Yoke
� 5000K* � WPC15LG Clear PC Vandal Resistant Guard � WPC15WG Wire Guard, SS Construction � CORDx Cord (X = ft)
� DIM 0-10V Dimmable Driver � USDC User Selectable Dimming Control � PCxxx Photocell (xxx = Voltage)
WALL PACK
FULL CUTOFF FORWARD THROW - 40W LED
*DLC Listed Configuration
REPLACES 150W MH
LED System data above based on WPCS-40WLED-UNIV-5000K(1) LED Lumen Maintenance Estimates based on TM-21 projections for the light source at 25˚C ambient(2) Specific Configurations Listed on DLC.
www.ilp-inc.com Industrial Lighting Products 407-478-3759
FORWARD THROW WALL PACK
ACCESSORIES
FULL CUTOFF - 40W LED
141/4˝
91/8˝
113/8˝
WPCS-40WLED-UNIV
SUMMARY DATA
PLANE AND CONE DIAGRAM
Photometric values based upon tests performed in compliance with LM-79. IES files can be downloaded at www.ilp-inc.com
LUMINAIRE OUTPUT = 3599 LMS120.0V 355.58 mA, 42.428 W, 0.9939 PF
HEMISPHERES TESTED: BOTHEFFICIENCY (Total): 100.0 %EFFICIENCY (Down / Up): 100.0 % / 0.0 %EFFICIENCY (Street / House): 67.0 % / 33.0 %ROADWAY CLASSIFICATION: TYPE IV, SHORTCUTOFF CLASSIFICATION: FULL CUTOFF
1.3163 :PMAL/SNEMUL 1 :SPMAL FO .ON
LUMINOUS OPENING: RECTANGULAR)teeF( 64.0 :htdiW
Length: 0.5800.0 :thgieH
4.24 :STTAW TUPNI
10 20 30 40
50
60
70
80
90
100
110
120
130
140 150 160 170 170 160 150 140
130
120
110
100
90
80
70
60
50
40 30 20 10
1000
2000
MAX CANDLEPOWER: 1274.8 Max plane at H = 45 Max cone at V = 55
WPC15LG
WPC15WGWPC15Y (Shown Mounted)
www.ilp-inc.com Industrial Lighting Products 407-478-3759
ORDERING GUIDE:
Project Name:
Fixture tyPe:
LamPs/Board:
cataLog NumBer:
VoLts/Watts:
5 Y E A R W A R RA
NT
Y
FEATURES • Die Cast Aluminum Housing • Hinged Full Cutoff Front Frame • ½˝ Coin Plugs with O-rings for Conduit & Photocell • Textured Architectural Bronze Powdercoat Finish
Over a Chromate Conversion Coating • Forward Throw Optic Lens • Cast-in Template for Mounting Directly Over
a 4˝ Recessed Outlet Box • 60W, 5000K (Std) • Listed for Wet Locations • Meets Dark Sky Requirements • Custom Colors Available Upon Request • DesignLights Consortium® Qualified (2)
LED SYSTEMBoard (CREE Chips) 4 x 6Calculated L70 (TM-21) 134,000 hoursDelivered Lumens 5,248 lmTotal Input Watts 66.7 WLuminaire Efficacy Rating (LER) 78.7 lm/WCorrelated Color Temperature (CCT) 5000 KColor Rendering Index (CRI) 69.1Max Ambient Temp 127°FUniversal Driver 120-277 V
SUITABLE APPLICATIONS • Parking lots • Buildings • General area lighting
WPCM 60WLED UNIV 5000K eg: WPC25WG
Series LED Driver Color Options � WPCM Full Cutoff Wall Pack � 60WLED 4x6 Board � UNIV 120-277 Driver � 4000K � WPC25LG Clear PC Vandal Resistant Guard
� 5000K* � WPC25WG Wire Guard, SS Construction � CORDx Cord (X = ft)
� DIM 0-10V Dimmable Driver � USDC User Selectable Dimming Control � PCxxx Photocell (xxx = Voltage)
WALL PACK
FULL CUTOFF FORWARD THROW - 60W LED
*DLC Listed Configuration
REPLACES 175W MH
LED System data above based on WPCM-60WLED-UNIV-5000K(1) LED Lumen Maintenance Estimates based on TM-21 projections for the light source at 25˚C ambient(2) Specific Configurations Listed on DLC.
www.ilp-inc.com Industrial Lighting Products 407-478-3759
FORWARD THROW WALL PACK
ACCESSORIES
FULL CUTOFF - 60W LED
13¾˝
181/4˝
91/8˝
WPC25LG
WPC25WG
WPC25GLC
WPCM-60WLED-UNIV
SUMMARY DATA
PLANE AND CONE DIAGRAM
Photometric values based upon tests performed in compliance with LM-79. IES files can be downloaded at www.ilp-inc.com
LUMINAIRE OUTPUT = 5064 LMS120.04 VAC, 554.94 mA, 66.421 W, 0.9971 PF
HEMISPHERES TESTED: BOTHEFFICIENCY (Total): 100.0 %EFFICIENCY (Down / Up): 100.0 % / 0.0 %EFFICIENCY (Street / House): 65.9 % / 34.1 %ROADWAY CLASSIFICATION: TYPE IV, SHORTCUTOFF CLASSIFICATION: FULL CUTOFF
709.6805 :PMAL/SNEMUL 1 :SPMAL FO .ON
LUMINOUS OPENING: RECTANGULAR)teeF( 64.0 :htdiW
Length: 0.5800.0 :thgieH
4.66 :STTAW TUPNI
10 20 30 40
50
60
70
80
90
100
110
120
130
140 150 160 170 170 160 150 140
130
120
110
100
90
80
70
60
50
40 30 20 10
1000
2000
MAX CANDLEPOWER: 1840.9 Max plane at H = 45 Max cone at V = 57.5
www.ilp-inc.com Industrial Lighting Products 407-478-3759
ORDERING GUIDE:
Project Name:
Fixture tyPe:
LamPs/Board:
cataLog NumBer:
VoLts/Watts:
5 Y E A R W A R RA
NT
Y
FEATURES • Die Cast Aluminum Housing • Hinged Full Cutoff Front Frame • ½˝ Coin Plugs with O-rings for Conduit & Photocell • Textured Architectural Bronze Powdercoat Finish
Over a Chromate Conversion Coating • Forward Throw Optic Lens • Cast-in Template for Mounting Directly Over
a 4˝ Recessed Outlet Box • 100W, 5000K (Std) • Listed for Wet Locations • Meets Dark Sky Requirements • Custom Colors Available Upon Request • DesignLights Consortium® Qualified (2)
LED SYSTEMBoard (CREE Chips) 4 x 6Calculated L70 (TM-21) 114,000 hoursDelivered Lumens 8,665 lmTotal Input Watts 96.9 WLuminaire Efficacy Rating (LER) 89.4 lm/WCorrelated Color Temperature (CCT) 5000 KColor Rendering Index (CRI) 75.9Max Ambient Temp 116°FUniversal Driver 120-277 V
SUITABLE APPLICATIONS • Parking lots • Buildings • General area lighting
WPCM 100WLED UNIV 5000K eg: WPC25WG
Series LED Driver Color Options � WPCM Full Cutoff Wall Pack � 100WLED 4x6 Board � UNIV 120-277 Driver � 4000K � WPC25LG Clear PC Vandal Resistant Guard
� 5000K* � WPC25WG Wire Guard, SS Construction � CORDx Cord (X = ft)
� DIM 0-10V Dimmable Driver � USDC User Selectable Dimming Control � PCxxx Photocell (xxx = Voltage)
WALL PACK
FULL CUTOFF FORWARD THROW - 100W LED
*DLC Listed Configuration
REPLACES 250W MH
LED System data above based on WPCM-100WLED-UNIV-5000K(1) LED Lumen Maintenance Estimates based on TM-21 projections for the light source at 25˚C ambient(2) Specific Configurations Listed on DLC.
www.ilp-inc.com Industrial Lighting Products 407-478-3759
FORWARD THROW WALL PACK
ACCESSORIES
FULL CUTOFF - 100W LED
WPC25WG
WPC25GLC
13¾˝
181/4˝
91/8˝
WPCM-100WLED-UNIV
SUMMARY DATA
PLANE AND CONE DIAGRAM
Photometric values based upon tests performed in compliance with LM-79. IES files can be downloaded at www.ilp-inc.com
LUMINAIRE OUTPUT = 8281 LMS120.01 VAC, 811.5 mA, 96.8 W, 0.9940 PF
HEMISPHERES TESTED: BOTHEFFICIENCY (Total): 100.0 %EFFICIENCY (Down / Up): 100.0 % / 0.0 %EFFICIENCY (Street / House): 59.2 % / 40.8 %ROADWAY CLASSIFICATION: TYPE III, VERY SHORTCUTOFF CLASSIFICATION: FULL CUTOFF
524.4038 :PMAL/SNEMUL 1 :SPMAL FO .ON
LUMINOUS OPENING: RECTANGULAR)teeF( 64.0 :htdiW
Length: 1.1900.0 :thgieH
8.09 :STTAW TUPNI
10 20 30 40
50
60
70
80
90
100
110
120
130
140 150 160 170 170 160 150 140
130
120
110
100
90
80
70
60
50
40 30 20 10
1500
3000
MAX CANDLEPOWER: 2580.1 Max plane at H = 0 Max cone at V = 27.5
www.ilp-inc.com Industrial Lighting Products 407-478-3759
ORDERING GUIDE:
Project Name:
Fixture tyPe:
LamPs/Board:
cataLog NumBer:
VoLts/Watts:
5 Y E A R W A R RA
NT
Y
FEATURES • Die Cast Aluminum Housing with Hinged Front Frame • Bronze Textured Architectural Powder Coat Finish • ½˝ Coin Plugs with O-rings for Conduit or Optional Photocell • Tempered Glass Lens • 120° Beam Angle • Cast-in Template for Wall or Junction Box Mounting (Std) • 4000K (Std) • Rated for Outdoor Use • 5 Year Warranty • DesignLights Consortium® Qualified (2)
OUTDOOR LIGHTING
SLIM PROFILE WALL PACK - 20W LED
complies with
RoHS
SUITABLE APPLICATIONS • Parking lots • Buildings • General area lighting
REPLACES 150W-175W MH
WPSP 20WLED UNIV 4000K eg: MCWHIP6 - WW
Series LED Driver Color Options � WPSP Slim Profile Wall Pack � 20WLED 2 Boards � UNIV 120-277 Driver � 4000K � CORDx Cord (X = ft)
� PLUGx Plug (X = Type, eg. L715P)
� PCxxx Photocell (xxx = Voltage)
LED SYSTEM20W System
Calculated L70 (TM-21) 150,000 hoursDelivered Lumens 1,579 lmTotal Input Watts 20.8 WLuminaire Efficacy Rating (LER) 75.8 lm/WCorrelated Color Temperature (CCT) 4000 KColor Rendering Index (CRI) > 70Max Ambient Temp 115˚ FUniversal Driver 120-277 V
LED System data above based on WPSP-20WLED-UNIV-4000K(1) LED Lumen Maintenance Estimates based on TM-21 projections for the light source at 25˚C ambient(2) Specific Configurations Listed on DLC.
www.ilp-inc.com Industrial Lighting Products 407-478-3759
MOUNTING OPTIONS
7.75”
6.625”
4.25”
These fixtures are extremely versatile and come with several mounting options, offering a stylish solution for a wide range of outdoor applications.
• Cast-in Template for Wall or Junction Box Mounting (Standard)
WPSP-20WLED-UNIV-4000K
SUMMARY DATA
PLANE AND CONE DIAGRAM
Photometric values based upon tests performed in compliance with LM-79. IES files can be downloaded at www.ilp-inc.com
LUMINAIRE OUTPUT: 1607 Lms.120.0V 0.1644A 19.67W PF=0.997
HEMISPHERES TESTED: BOTHEFFICIENCY (Total): 100.0 %EFFICIENCY (Down / Up): 100.0 % / 0.0 %EFFICIENCY (Street / House): 71.6 % / 28.4 %ROADWAY CLASSIFICATION: TYPE III, VERY SHORTCUTOFF CLASSIFICATION: FULL CUTOFF
592.3051 :PMAL/SNEMUL 1 :SPMAL FO .ON
LUMINOUS OPENING: RECTANGULAR)teeF( 64.0 :htdiW
Length: 0.1600.0 :thgieH
7.91 :STTAW TUPNI
10 20 30 40
50
60
70
80
90
100
110
120
130
140 150 160 170 170 160 150 140
130
120
110
100
90
80
70
60
50
40 30 20 10
300
600
MAX CANDLEPOWER: 725.3 Max plane at H = 0 Max cone at V = 10
SLIM PROFILE WALL PACK - 20W LEDOUTDOOR LIGHTING
www.ilp-inc.com Industrial Lighting Products 407-478-3759
ORDERING GUIDE:
Project Name:
Fixture tyPe:
LamPs/Board:
cataLog NumBer:
VoLts/Watts:
5 Y E A R W A R RA
NT
Y
FEATURES • Die Cast Aluminum Housing with Hinged Front Frame • Bronze Textured Architectural Powder Coat Finish • ½˝ Coin Plugs with O-rings for Conduit or Optional Photocell • Tempered Glass Lens • 120° Beam Angle • Cast-in Template for Wall or Junction Box Mounting (Std) • 4000K (Std) • Rated for Outdoor Use • 5 Year Warranty • DesignLights Consortium® Qualified (2)
OUTDOOR LIGHTING
SLIM PROFILE WALL PACK - 30W LED
complies with
RoHS
SUITABLE APPLICATIONS • Parking lots • Buildings • General area lighting
REPLACES 150W-175W MH
WPSP 30WLED UNIV 4000K eg: MCWHIP6 - WW
Series LED Driver Color Options � WPSP Slim Profile Wall Pack � 30WLED 2 Boards � UNIV 120-277 Driver � 4000K � CORDx Cord (X = ft)
� PLUGx Plug (X = Type, eg. L715P)
� PCxxx Photocell (xxx = Voltage)
LED SYSTEM30W System
Calculated L70 (TM-21) 100,000 hoursDelivered Lumens 2,393 lmTotal Input Watts 27.3 WLuminaire Efficacy Rating (LER) 87.6 lm/WCorrelated Color Temperature (CCT) 4000 KColor Rendering Index (CRI) > 70Max Ambient Temp 110˚ FUniversal Driver 120-277 V
LED System data above based on WPSP-30WLED-UNIV-4000K(1) LED Lumen Maintenance Estimates based on TM-21 projections for the light source at 25˚C ambient(2) Specific Configurations Listed on DLC.
www.ilp-inc.com Industrial Lighting Products 407-478-3759
MOUNTING OPTIONS
7.75”
6.625”
4.25”
These fixtures are extremely versatile and come with several mounting options, offering a stylish solution for a wide range of outdoor applications.
• Cast-in Template for Wall or Junction Box Mounting (Standard)
SLIM PROFILE WALL PACK - 30W LEDOUTDOOR LIGHTING
WPSP-30WLED-UNIV-4000K
SUMMARY DATA
PLANE AND CONE DIAGRAM
Photometric values based upon tests performed in compliance with LM-79. IES files can be downloaded at www.ilp-inc.com
10 20 30 40
50
60
70
80
90
100
110
120
130
140 150 160 170 170 160 150 140
130
120
110
100
90
80
70
60
50
40 30 20 10
500
1000
MAX CANDLEPOWER: 1096.9 Max plane at H = 180 Max cone at V = 2.5
LUMINAIRE OUTPUT = 2354 LMS120.0V 0.2299A 27.37W PF=0.992
HEMISPHERES TESTED: LOWEREFFICIENCY (Total): 100.0 %EFFICIENCY (Down / Up): 100.0 % / 0.0 %EFFICIENCY (Street / House): 50.3 % / 49.7 %ROADWAY CLASSIFICATION: TYPE VSCUTOFF CLASSIFICATION: FULL CUTOFF
497.6532 :PMAL/SNEMUL 1 :SPMAL FO .ON
LUMINOUS OPENING: RECTANGULAR)teeF( 64.0 :htdiW
Length: 0.1500.0 :thgieH
4.72 :STTAW TUPNI
www.ilp-inc.com Industrial Lighting Products 407-478-3759
ORDERING GUIDE:
Project Name:
Fixture tyPe:
LamPs/Board:
cataLog NumBer:
VoLts/Watts:
5 Y E A R W A R RA
NT
Y
FEATURES • Die Cast Aluminum Housing with Hinged Front Frame • Bronze Textured Architectural Powder Coat Finish • ½˝ Coin Plugs with O-rings for Conduit or Optional Photocell • Tempered Glass Lens • 120° Beam Angle • Cast-in Template for Wall or Junction Box Mounting (Std),
Optional Knuckle Mounting Kit or Yoke Mounting Kit • 4000K (Std) • Rated for Outdoor Use • 5 Year Warranty • DesignLights Consortium® Qualified (2)
OUTDOOR LIGHTING
SLIM PROFILE FLOOD - 20W LED
complies with
RoHS
SUITABLE APPLICATIONS • Parking lots • Buildings • General area lighting • Signs
REPLACES 150W-175W MH
WPSP KMK 20WLED UNIV 4000K eg: MCWHIP6 - WW
Series Mounting LED Driver Color Options � WPSP Slim Profile Flood � KMK Knuckle Mounting Kit � 20WLED 2 Boards � UNIV 120-277 Driver � 4000K � CORDx Cord (X = ft)
� YMK Yoke Mounting Kit � PLUGx Plug (X = Type, eg. L715P)
� PCxxx Photocell (xxx = Voltage)
LED SYSTEM20W System
Calculated L70 (TM-21) 150,000 hoursDelivered Lumens 1,579 lmTotal Input Watts 20.8 WLuminaire Efficacy Rating (LER) 75.8 lm/WCorrelated Color Temperature (CCT) 4000 KColor Rendering Index (CRI) > 70Max Ambient Temp 115˚ FUniversal Driver 120-277 V
LED System data above based on WPSP-20WLED-UNIV-4000K(1) LED Lumen Maintenance Estimates based on TM-21 projections for the light source at 25˚C ambient(2) Specific Configurations Listed on DLC.
www.ilp-inc.com Industrial Lighting Products 407-478-3759
MOUNTING OPTIONS
7.75”
6.625”
4.25”
These fixtures are extremely versatile and come with several mounting options, offering a stylish solution for a wide range of outdoor applications.
• Cast-in Template for Wall or Junction Box Mounting (Standard) • Optional Knuckle Mounting Kit (KMK) • Optional Yoke Mounting Kit (YMK)
Knuckle Mounting Kit Yoke Mounting Kit
SLIM PROFILE FLOOD - 20W LEDOUTDOOR LIGHTING
WPSP-20WLED-UNIV-4000K
SUMMARY DATA
PLANE AND CONE DIAGRAM
Photometric values based upon tests performed in compliance with LM-79. IES files can be downloaded at www.ilp-inc.com
LUMINAIRE OUTPUT: 1607 Lms.120.0V 0.1644A 19.67W PF=0.997
HEMISPHERES TESTED: BOTHEFFICIENCY (Total): 100.0 %EFFICIENCY (Down / Up): 100.0 % / 0.0 %EFFICIENCY (Street / House): 71.6 % / 28.4 %ROADWAY CLASSIFICATION: TYPE III, VERY SHORTCUTOFF CLASSIFICATION: FULL CUTOFF
592.3051 :PMAL/SNEMUL 1 :SPMAL FO .ON
LUMINOUS OPENING: RECTANGULAR)teeF( 64.0 :htdiW
Length: 0.1600.0 :thgieH
7.91 :STTAW TUPNI
10 20 30 40
50
60
70
80
90
100
110
120
130
140 150 160 170 170 160 150 140
130
120
110
100
90
80
70
60
50
40 30 20 10
300
600
MAX CANDLEPOWER: 725.3 Max plane at H = 0 Max cone at V = 10
www.ilp-inc.com Industrial Lighting Products 407-478-3759
ORDERING GUIDE:
Project Name:
Fixture tyPe:
LamPs/Board:
cataLog NumBer:
VoLts/Watts:
5 Y E A R W A R RA
NT
Y
FEATURES • Die Cast Aluminum Housing with Hinged Front Frame • Bronze Textured Architectural Powder Coat Finish • ½˝ Coin Plugs with O-rings for Conduit or Optional Photocell • Tempered Glass Lens • 120° Beam Angle • Cast-in Template for Wall or Junction Box Mounting (Std),
Optional Knuckle Mounting Kit or Yoke Mounting Kit • 4000K (Std) • Rated for Outdoor Use • 5 Year Warranty • DesignLights Consortium® Qualified (2)
OUTDOOR LIGHTING
SLIM PROFILE FLOOD - 30W LED
complies with
RoHS
SUITABLE APPLICATIONS • Parking lots • Buildings • General area lighting • Signs
REPLACES 150W-175W MH
WPSP KMK 30WLED UNIV 4000K eg: MCWHIP6 - WW
Series Mounting LED Driver Color Options � WPSP Slim Profile Flood � KMK Knuckle Mounting Kit � 30WLED 2 Boards � UNIV 120-277 Driver � 4000K � CORDx Cord (X = ft)
� YMK Yoke Mounting Kit � PLUGx Plug (X = Type, eg. L715P)
� PCxxx Photocell (xxx = Voltage)
LED SYSTEM30W System
Calculated L70 (TM-21) 100,000 hoursDelivered Lumens 2,393 lmTotal Input Watts 27.3 WLuminaire Efficacy Rating (LER) 87.6 lm/WCorrelated Color Temperature (CCT) 4000 KColor Rendering Index (CRI) > 70Max Ambient Temp 110˚ FUniversal Driver 120-277 V
LED System data above based on WPSP-30WLED-UNIV-4000K(1) LED Lumen Maintenance Estimates based on TM-21 projections for the light source at 25˚C ambient(2) Specific Configurations Listed on DLC.
www.ilp-inc.com Industrial Lighting Products 407-478-3759
MOUNTING OPTIONS
7.75”
6.625”
4.25”
These fixtures are extremely versatile and come with several mounting options, offering a stylish solution for a wide range of outdoor applications.
• Cast-in Template for Wall or Junction Box Mounting (Standard) • Optional Knuckle Mounting Kit (KMK) • Optional Yoke Mounting Kit (YMK)
Knuckle Mounting Kit Yoke Mounting Kit
SLIM PROFILE FLOOD - 30W LEDOUTDOOR LIGHTING
WPSP-30WLED-UNIV-4000K
SUMMARY DATA
PLANE AND CONE DIAGRAM
Photometric values based upon tests performed in compliance with LM-79. IES files can be downloaded at www.ilp-inc.com
10 20 30 40
50
60
70
80
90
100
110
120
130
140 150 160 170 170 160 150 140
130
120
110
100
90
80
70
60
50
40 30 20 10
500
1000
MAX CANDLEPOWER: 1096.9 Max plane at H = 180 Max cone at V = 2.5
LUMINAIRE OUTPUT = 2354 LMS120.0V 0.2299A 27.37W PF=0.992
HEMISPHERES TESTED: LOWEREFFICIENCY (Total): 100.0 %EFFICIENCY (Down / Up): 100.0 % / 0.0 %EFFICIENCY (Street / House): 50.3 % / 49.7 %ROADWAY CLASSIFICATION: TYPE VSCUTOFF CLASSIFICATION: FULL CUTOFF
497.6532 :PMAL/SNEMUL 1 :SPMAL FO .ON
LUMINOUS OPENING: RECTANGULAR)teeF( 64.0 :htdiW
Length: 0.1500.0 :thgieH
4.72 :STTAW TUPNI
www.ilp-inc.com Industrial Lighting Products 407-478-3759
ORDERING GUIDE:
Project Name:
Fixture tyPe:
LamPs/Board:
cataLog NumBer:
VoLts/Watts:
5 Y E A R W A R RA
NT
Y
ULTRASONIC STAIRWELL
2 FT CAVERN / CAVERN LITE
eg: C2 or CL2 30WLED UNIV 5000K FRAL
Series LED Driver Color Options � C2 Cavern 2ft � 20WLED 2x28 Boards � UNIV 120-277 Driver � 3500K* T FRAL Frosted Acrylic Lens � CL2 Cavern Lite 2ft � 30WLED 2x28 Boards � 4000K � WHP White Paint (Std)
� 5000K � BRP Bronze Paint � CPX Custom Paint (X = Spec Color)
� CORDx Cord (X = ft)
� PLUGx Plug (X = Type, eg. L715P)
� LEDBB LED Battery Backup (may reduce max ambient)
� SD480 480V Step Down Transformer � TPS Tamper Proof Screws (Cavern Only)
� DIM 0-10V Dimmable Driver � FIOS On/Off Occupancy Sensor Installed � BDxx Preset Bi-level Dim Sensor (xx=% eg. 20,30)
� USDC User Selectable Dimming Control � USBD User Select Bi-level Dim w/ Occ. Sensor � USBD/HL User Select High/Low Bi-level Dimming
with Occupancy Sensor
CavernShown with
USBD Option
Cavern Lite Shown with USBD Option
DISTINGUISHING OPTIONS • User Selectable High/Low Bi-level Dimming
with Occupancy Sensor (USBD/HL) • LED Battery Back-Up (LEDBB) • Ultrasonic Sensor (FIOS)
(more details on back)
FEATURES • Fully Control Light Levels for Both Occupied and Unoccupied
Areas with High/Low, User Selectable Bi-Level Dimming (USBD/HL) Option, to Help Maintain Life Safety Codes without Having to Open the Fixture.
• Impact Resistant Radial Designed Lens - Internal Linear Ribbed, 25% DR Acrylic
• 5 Year Warranty • DesignLights Consortium® Qualified (2)
Cavern Housing - .060” Aluminum Body - .200” 6061 Machined Aluminum End Plates - .500” Threaded End Plug - Baked on Enamel Powder Coat Finish
Cavern Lite Housing - .040 Aluminum Housing - Baked on Pre-Paint Enamel
REPLACES 2T8-F17or 150W MH
*Call for Availability
LED SYSTEM 20W System 30W SystemBoard (LG Chips) 2 X 28 2 X 28Calculated L70 (TM-21) > 100K hrs > 100K hrsDelivered Lumens 1,717 lm 2,532 lmTotal Input Watts 19.21 W 31.47 WLuminaire Efficacy Rating (LER) 89.38 lm/W 80.46 lm/WCorrelated Color Temperature (CCT) 5000 K 5000 KColor Rendering Index (CRI) > 80 > 80Max Ambient Temp 105˚ F 100˚ FUniversal Driver 120-277 V 120-277 V
LED System data above based on CL2-20WLED-UNIV-5000K-FRAL-USBD & CL2-30WLED-UNIV-5000K-FRAL-USBD(1) LED Lumen Maintenance Estimates based on TM-21 projections for the light source at 25˚C ambient(2) Specific Configurations Listed on DLC.
www.ilp-inc.com Industrial Lighting Products 407-478-3759
OPTIONS
2 FT CAVERN / CAVERN LITEULTRASONIC STAIRWELL
USER CONTROLLED DIMMING (USDC) GIVES YOU THE ABILITY TO ADJUST THE LIGHT LEVEL BY SIMPLY TURNING AN INTERNAL CONTROL
- Fully Control the Minimum Light Level for the Occupied &
Unoccupied Modes
- Dimmable down to 10%.
- Internal dim control can be accessed without disassembling
the fixture.
LED BATTERY BACKUP OPTION (LEDBB)
- Allows the fixture to remain fully functional as an Emergency Light
during power failures.
ULTRASONIC SENSOR CONTROL IS INSTALLED WHEN THE (FIOS) OPTION IS ORDERED
- Ultrasonic detection operates by transmitting sound waves
throughout an area and measuring the speed at which they return.
Movement increases the return frequency, which
triggers occupancy.
- Fail on mode can be set to ensure the lamps come on to 100%
in the event of a control failure.
- Burn in and test modes are available for installation and servicing.
(Instructions can be down loaded from the Cavern web page)
CL2-20WLED-5000K-FRAL-USBD
SUMMARY DATA
PLANE AND CONE DIAGRAM
Photometric values based upon tests performed in compliance with LM-79. IES files can be downloaded at www.ilp-inc.com
LUMINAIRE OUTPUT = 1751 LMS120.0V 0.1612A 19.21W PF=0.993
HEMISPHERES TESTED: BOTHEFFICIENCY (Total): 100.0 %EFFICIENCY (Down / Up): 50.7 % / 49.3 %EFFICIENCY (Street / House): 95.4 % / 4.6 %CUTOFF CLASSIFICATION: NONCUTOFF
608.1571 :PMAL/SNEMUL 1 :SPMAL FO .ON
LUMINOUS OPENING: RECTANGULAR)teeF( 71.0 :htdiW
Length: 2.0012.0 :thgieH
12.91 :STTAW TUPNI
10 20 30 40
50
60
70
80
90
100
110
120
130
140 150 160 170 170 160 150 140
130
120
110
100
90
80
70
60
50
40 30 20 10
250
500
MAX CANDLEPOWER: 523.6 Max plane at H = 0 Max cone at V = 90
CL2-30WLED-5000K-FRAL-USBD
SUMMARY DATA
PLANE AND CONE DIAGRAM
Photometric values based upon tests performed in compliance with LM-79. IES files can be downloaded at www.ilp-inc.com
LUMINAIRE OUTPUT = 2584 LMS120.0V 0.2661A 31.36W PF=0.982
HEMISPHERES TESTED: BOTHEFFICIENCY (Total): 100.0 %EFFICIENCY (Down / Up): 50.7 % / 49.3 %EFFICIENCY (Street / House): 95.4 % / 4.6 %CUTOFF CLASSIFICATION: NONCUTOFF
233.3852 :PMAL/SNEMUL 1 :SPMAL FO .ON
LUMINOUS OPENING: RECTANGULAR)teeF( 71.0 :htdiW
Length: 2.0012.0 :thgieH
4.13 :STTAW TUPNI
10 20 30 40
50
60
70
80
90
100
110
120
130
140 150 160 170 170 160 150 140
130
120
110
100
90
80
70
60
50
40 30 20 10
350
700
MAX CANDLEPOWER: 772.2 Max plane at H = 0 Max cone at V = 90
www.ilp-inc.com Industrial Lighting Products 407-478-3759
ORDERING GUIDE:
Project Name:
Fixture tyPe:
LamPs/Board:
cataLog NumBer:
VoLts/Watts:
5 Y E A R W A R RA
NT
Y
ULTRASONIC STAIRWELL
CAVERN / CAVERN LITE - 30W LED
eg: C4 or CL4 30WLED UNIV 5000K FRAL
Series LED Driver Color Options � C4 Cavern 4ft � 30WLED 2x28 Boards � UNIV 120-277 Driver � 3500K* T FRAL Frosted Acrylic Lens � CL4 Cavern Lite 4ft � 4000K � WHP White Paint (Std)
� 5000K � BRP Bronze Paint � CPX Custom Paint (X = Spec Color)
� CORDx Cord (X = ft)
� PLUGx Plug (X = Type, eg. L715P)
� LEDBB LED Battery Backup (may reduce max ambient)
� SD480 480V Step Down Transformer � TPS Tamper Proof Screws (Cavern Only)
� DIM 0-10V Dimmable Driver � FIOS On/Off Occupancy Sensor Installed � BDxx Preset Bi-level Dim Sensor (xx=% eg. 20,30)
� USDC User Selectable Dimming Control � USBD User Select Bi-level Dim w/ Occ. Sensor � USBD/HL User Select High/Low Bi-level Dimming
with Occupancy Sensor
CavernShown with
USBD Option
Cavern Lite Shown with USBD Option
REPLACES 2T12, 2T8, or 150W MH
LED SYSTEMBoard (LG Chips) 2 x 28Calculated L70 (TM-21) > 100,000 hrsDelivered Lumens 2,617 lmTotal Input Watts 31.33 WLuminaire Efficacy Rating (LER) 83.5 lm/WCorrelated Color Temperature (CCT) 5000 KColor Rendering Index (CRI) > 80Max Ambient Temp 110˚ FUniversal Driver 120-277 V
*Call for Availability
LED System data above based on CL4-30WLED-UNIV-5000K-FRAL-USBD(1) LED Lumen Maintenance Estimates based on TM-21 projections for the light source at 25˚C ambient(2) Specific Configurations Listed on DLC.
DISTINGUISHING OPTIONS • User Selectable High/Low Bi-level Dimming
with Occupancy Sensor (USBD/HL) • LED Battery Back-Up (LEDBB) • Ultrasonic Sensor (FIOS)
(more details on back)
FEATURES • Fully Control Light Levels for Both Occupied and Unoccupied
Areas with High/Low, User Selectable Bi-Level Dimming (USBD/HL) Option, to Help Maintain Life Safety Codes without Having to Open the Fixture.
• Impact Resistant Radial Designed Lens - Internal Linear Ribbed, 25% DR Acrylic
• 5 Year Warranty • DesignLights Consortium® Qualified (2)
Cavern Housing - .060” Aluminum Body - .200” 6061 Machined Aluminum End Plates - .500” Threaded End Plug - Baked on Enamel Powder Coat Finish
Cavern Lite Housing - .040 Aluminum Housing - Baked on Pre-Paint Enamel
www.ilp-inc.com Industrial Lighting Products 407-478-3759
OPTIONS
CAVERN/CAVERN LITE - 30W LEDULTRASONIC STAIRWELL
USER CONTROLLED DIMMING (USDC) GIVES YOU THE ABILITY TO ADJUST THE LIGHT LEVEL BY SIMPLY TURNING AN INTERNAL CONTROL
- Fully Control the Minimum Light Level for the Occupied &
Unoccupied Modes
- Dimmable down to 10%.
- Internal dim control can be accessed without disassembling
the fixture.
LED BATTERY BACKUP OPTION (LEDBB)
- Allows the fixture to remain fully functional as an Emergency Light
during power failures.
ULTRASONIC SENSOR CONTROL IS INSTALLED WHEN THE (FIOS) OPTION IS ORDERED
- Ultrasonic detection operates by transmitting sound waves
throughout an area and measuring the speed at which they return.
Movement increases the return frequency, which
triggers occupancy.
- Fail on mode can be set to ensure the lamps come on to 100%
in the event of a control failure.
- Burn in and test modes are available for installation and servicing.
(Instructions can be down loaded from the Cavern web page)
CL4-30WLED-UNIV-5000K-USBD
SUMMARY DATA
PLANE AND CONE DIAGRAM
Photometric values based upon tests performed in compliance with LM-79. IES files can be downloaded at www.ilp-inc.com
LUMINAIRE OUTPUT = 2597 LMS120.0V 0.2661A 31.30W PF=0.980
HEMISPHERES TESTED: BOTHEFFICIENCY (Total): 100.0 %EFFICIENCY (Down / Up): 50.4 % / 49.6 %EFFICIENCY (Street / House): 94.6 % / 5.4 %ROADWAY CLASSIFICATION: TYPE IV, VERY SHORTCUTOFF CLASSIFICATION: NONCUTOFF
731.6952 :PMAL/SNEMUL 1 :SPMAL FO .ON
LUMINOUS OPENING: RECTANGULAR)teeF( 44.0 :htdiW
Length: 4.0070.0 :thgieH
3.13 :STTAW TUPNI
10 20 30 40
50
60
70
80
90
100
110
120
130
140 150 160 170 170 160 150 140
130
120
110
100
90
80
70
60
50
40 30 20 10
350
700
MAX CANDLEPOWER: 761.1 Max plane at H = 0 Max cone at V = 87.5
www.ilp-inc.com Industrial Lighting Products 407-478-3759
ORDERING GUIDE:
Project Name:
Fixture tyPe:
LamPs/Board:
cataLog NumBer:
VoLts/Watts:
5 Y E A R W A R RA
NT
Y
ULTRASONIC STAIRWELL
CAVERN / CAVERN LITE - 40W LED
eg: C4 or CL4 40WLED UNIV 5000K eg: USBD
Series LED Driver Color Options � C4 Cavern 4ft � 40WLED 1x36 Board � UNIV 120-277 Driver � 3000K* � WHP White Paint (Std)
� CL4 Cavern Lite 4ft � 4000K � BRP Bronze Paint � 5000K � CPX Custom Paint (X = Spec Color)
� FRAL Frosted Acrylic Lens � CORDx Cord (X = ft)
� PLUGx Plug (X = Type, eg. L715P)
� LEDBB LED Battery Backup (may reduce max ambient)
� SD480 480V Step Down Transformer � TPS Tamper Proof Screws (Cavern Only)
� DIM 0-10V Dimmable Driver � FIOS On/Off Occupancy Sensor Installed � BDxx Preset Bi-level Dim Sensor (xx=% eg. 20,30)
� USDC User Selectable Dimming Control � USBD User Select Bi-level Dim w/ Occ. Sensor � USBD/HL User Select High/Low Bi-level Dimming
with Occupancy Sensor
CavernShown with
USBD Option
Cavern Lite Shown with USBD Option
LED SYSTEMBoard (Nichia Chips) 1 x 36Calculated L70 (TM-21) 70,000 hoursDelivered Lumens 3,433 lmTotal Input Watts 46.08 WLuminaire Efficacy Rating (LER) 74.50 lm/WCorrelated Color Temperature (CCT) 5000 KColor Rendering Index (CRI) > 80Max Ambient Temp 111˚ FUniversal Driver 120-277 V
REPLACES 2T12, 2T8, or 150W MH
LED System data above based on C4-40WLED-UNIV-5000K-US-DIM(1) LED Lumen Maintenance Estimates based on TM-21 projections for the light source at 25˚C ambient(2) Specific Configurations Listed on DLC.
*Call for Availability
DISTINGUISHING OPTIONS • User Selectable High/Low Bi-level Dimming
with Occupancy Sensor (USBD/HL) • LED Battery Back-Up (LEDBB) • Ultrasonic Sensor (FIOS)
(more details on back)
FEATURES • Fully Control Light Levels for Both Occupied and Unoccupied
Areas with High/Low, User Selectable Bi-Level Dimming (USBD/HL) Option, to Help Maintain Life Safety Codes without Having to Open the Fixture.
• Impact Resistant Radial Designed Lens - Internal Linear Ribbed, 25% DR Acrylic
• 5 Year Warranty • DesignLights Consortium® Qualified (2)
Cavern Housing - .060” Aluminum Body - .200” 6061 Machined Aluminum End Plates - .500” Threaded End Plug - Baked on Enamel Powder Coat Finish
Cavern Lite Housing - .040 Aluminum Housing - Baked on Pre-Paint Enamel
www.ilp-inc.com Industrial Lighting Products 407-478-3759
OPTIONS
C4-40WLED-UNIV
SUMMARY DATA
PLANE AND CONE DIAGRAM
Photometric values based upon tests performed in compliance with LM-79. IES files can be downloaded at www.ilp-inc.com
LUMINAIRE OUTPUT = 3430 LMS120VAC, 384.57mA 46.075W, 0.9976PF
HEMISPHERES TESTED: BOTHEFFICIENCY (Total): 100.0 %EFFICIENCY (Down / Up): 95.0 % / 5.0 %EFFICIENCY (Street / House): 51.7 % / 48.3 %ROADWAY CLASSIFICATION: TYPE IV, VERY SHORTCUTOFF CLASSIFICATION: NONCUTOFF
946.3343 :PMAL/SNEMUL 1 :SPMAL FO .ON
LUMINOUS OPENING: RECTANGULAR)teeF( 00.4 :htdiW
Length: 0.4200.0 :thgieH
1.64 :STTAW TUPNI
10 20 30 40
50
60
70
80
90
100
110
120
130
140 150 160 170 170 160 150 140
130
120
110
100
90
80
70
60
50
40 30 20 10
400
800
MAX CANDLEPOWER: 978.9 Max plane at H = 112.5 Max cone at V = 7.5
CAVERN / CAVERN LITE - 40WULTRASONIC STAIRWELL
USER CONTROLLED DIMMING (USDC) GIVES YOU THE ABILITY TO ADJUST THE LIGHT LEVEL BY SIMPLY TURNING AN INTERNAL CONTROL
- Fully Control the Minimum Light Level for the Occupied &
Unoccupied Modes
- Dimmable down to 10%.
- Internal dim control can be accessed without disassembling
the fixture.
LED BATTERY BACKUP OPTION (LEDBB)
- Allows the fixture to remain fully functional as an Emergency Light
during power failures.
ULTRASONIC SENSOR CONTROL IS INSTALLED WHEN THE (FIOS) OPTION IS ORDERED
- Ultrasonic detection operates by transmitting sound waves
throughout an area and measuring the speed at which they return.
Movement increases the return frequency, which
triggers occupancy.
- Fail on mode can be set to ensure the lamps come on to 100%
in the event of a control failure.
- Burn in and test modes are available for installation and servicing.
(Instructions can be down loaded from the Cavern web page)
www.ilp-inc.com Industrial Lighting Products 407-478-3759
ORDERING GUIDE:
Project Name:
Fixture tyPe:
LamPs/Board:
cataLog NumBer:
VoLts/Watts:
5 Y E A R W A R RA
NT
Y
ULTRASONIC STAIRWELL
CAVERN / CAVERN LITE - 60W LED
eg: C4 or CL4 60WLED UNIV 5000K FRAL
Series LED Driver Color Options � C4 Cavern 4ft � 60WLED 2x56 Boards � UNIV 120-277 Driver � 3500K* T FRAL Frosted Acrylic Lens � CL4 Cavern Lite 4ft � 4000K � WHP White Paint (Std)
� 5000K � BRP Bronze Paint � CPX Custom Paint (X = Spec Color)
� CORDx Cord (X = ft)
� PLUGx Plug (X = Type, eg. L715P)
� LEDBB LED Battery Backup (may reduce max ambient)
� SD480 480V Step Down Transformer � TPS Tamper Proof Screws (Cavern Only)
� DIM 0-10V Dimmable Driver � FIOS On/Off Occupancy Sensor Installed � BDxx Preset Bi-level Dim Sensor (xx=% eg. 20,30)
� USDC User Selectable Dimming Control � USBD User Select Bi-level Dim w/ Occ. Sensor � USBD/HL User Select High/Low Bi-level Dimming
with Occupancy Sensor
CavernShown with
USBD Option
Cavern Lite Shown with USBD Option
REPLACES 2T5HO 175W-250W MH
LED SYSTEMBoard (LG Chips) 2 x 56Calculated L70 (TM-21) > 100,000 hrsDelivered Lumens 4,928 lmTotal Input Watts 59.16 WLuminaire Efficacy Rating (LER) 83.3 lm/WCorrelated Color Temperature (CCT) 5000 KColor Rendering Index (CRI) > 80Max Ambient Temp 110˚ FUniversal Driver 120-277 V
*Call for Availability
LED System data above based on CL4-60WLED-UNIV-5000K-FRAL-USBD(1) LED Lumen Maintenance Estimates based on TM-21 projections for the light source at 25˚C ambient(2) Specific Configurations Listed on DLC.
FEATURES • Fully Control Light Levels for Both Occupied and Unoccupied
Areas with High/Low, User Selectable Bi-Level Dimming (USBD/HL) Option, to Help Maintain Life Safety Codes without Having to Open the Fixture.
• Impact Resistant Radial Designed Lens - Internal Linear Ribbed, 25% DR Acrylic
• 5 Year Warranty • DesignLights Consortium® Qualified (2)
Cavern Housing - .060” Aluminum Body - .200” 6061 Machined Aluminum End Plates - .500” Threaded End Plug - Baked on Enamel Powder Coat Finish
Cavern Lite Housing - .040 Aluminum Housing - Baked on Pre-Paint Enamel
DISTINGUISHING OPTIONS • User Selectable High/Low Bi-level Dimming
with Occupancy Sensor (USBD/HL) • LED Battery Back-Up (LEDBB) • Ultrasonic Sensor (FIOS)
(more details on back)
www.ilp-inc.com Industrial Lighting Products 407-478-3759
OPTIONS
CAVERN/CAVERN LITE - 60W LEDULTRASONIC STAIRWELL
USER CONTROLLED DIMMING (USDC) GIVES YOU THE ABILITY TO ADJUST THE LIGHT LEVEL BY SIMPLY TURNING AN INTERNAL CONTROL
- Fully Control the Minimum Light Level for the Occupied &
Unoccupied Modes
- Dimmable down to 10%.
- Internal dim control can be accessed without disassembling
the fixture.
LED BATTERY BACKUP OPTION (LEDBB)
- Allows the fixture to remain fully functional as an Emergency Light
during power failures.
ULTRASONIC SENSOR CONTROL IS INSTALLED WHEN THE (FIOS) OPTION IS ORDERED
- Ultrasonic detection operates by transmitting sound waves
throughout an area and measuring the speed at which they return.
Movement increases the return frequency, which
triggers occupancy.
- Fail on mode can be set to ensure the lamps come on to 100%
in the event of a control failure.
- Burn in and test modes are available for installation and servicing.
(Instructions can be down loaded from the Cavern web page)
CL4-60WLED-UNIV-5000K-USBD
SUMMARY DATA
PLANE AND CONE DIAGRAM
Photometric values based upon tests performed in compliance with LM-79. IES files can be downloaded at www.ilp-inc.com
LUMINAIRE OUTPUT = 4942 LMS120.0V 0.4975A 59.28W PF=0.993
HEMISPHERES TESTED: BOTHEFFICIENCY (Total): 100.0 %EFFICIENCY (Down / Up): 49.4 % / 50.6 %EFFICIENCY (Street / House): 95.3 % / 4.7 %ROADWAY CLASSIFICATION: UnclassifiedCUTOFF CLASSIFICATION: NONCUTOFF
979.0494 :PMAL/SNEMUL 1 :SPMAL FO .ON
LUMINOUS OPENING: RECTANGULAR)teeF( 44.0 :htdiW
Length: 4.0070.0 :thgieH
3.95 :STTAW TUPNI
10 20 30 40
50
60
70
80
90
100
110
120
130
140 150 160 170 170 160 150 140
130
120
110
100
90
80
70
60
50
40 30 20 10
1000
2000
MAX CANDLEPOWER: 1424.5 Max plane at H = 0 Max cone at V = 97.5
www.ilp-inc.com Industrial Lighting Products 407-478-3759
ORDERING GUIDE:
Project Name:
Fixture tyPe:
LamPs/Board:
cataLog NumBer:
VoLts/Watts:
5 Y E A R W A R RA
NT
Y
eg: C4 or CL4 80WLED UNIV 5000K eg: USBD
Series LED Driver Color Options � C4 Cavern 4ft � 80WLED 2x36 Boards � UNIV 120-277 Driver � 3000K* � WHP White Paint (Std)
� CL4 Cavern Lite 4ft � 4000K � BRP Bronze Paint � 5000K** � CPX Custom Paint (X = Spec Color)
� FRAL Frosted Acrylic Lens � CORDx Cord (X = ft)
� PLUGx Plug (X = Type, eg. L715P)
� LEDBB LED Battery Backup (may reduce max ambient)
� SD480 480V Step Down Transformer � TPS Tamper Proof Screws (Cavern Only)
� DIM 0-10V Dimmable Driver � FIOS On/Off Occupancy Sensor Installed � BDxx Preset Bi-level Dim Sensor (xx=% eg. 20,30)
� USDC User Selectable Dimming Control � USBD User Select Bi-level Dim w/ Occ. Sensor � USBD/HL User Select High/Low Bi-level Dimming
with Occupancy Sensor
ULTRASONIC STAIRWELL
CAVERN / CAVERN LITE - 80W LED
LED SYSTEMBoard (Nichia Chips) 2 x 36Calculated L70 (TM-21) 74,000 hoursDelivered Lumens 5,994 lmTotal Input Watts 80.08 WLuminaire Efficacy Rating (LER) 74.85 lm/WCorrelated Color Temperature (CCT) 5000 KColor Rendering Index (CRI) > 80Max Ambient Temp 98˚ FUniversal Driver 120-277 V
*Call for Availability**DLC Listed Configuration
CavernShown with
USBD Option
Cavern Lite Shown with USBD Option
REPLACES 2T5HO 175W-250W MH
LED System data above based on C4-80WLED-UNIV-5000K-US-DIM(1) LED Lumen Maintenance Estimates based on TM-21 projections for the light source at 25˚C ambient(2) Specific Configurations Listed on DLC.
DISTINGUISHING OPTIONS • User Selectable High/Low Bi-level Dimming
with Occupancy Sensor (USBD/HL) • LED Battery Back-Up (LEDBB) • Ultrasonic Sensor (FIOS)
(more details on back)
FEATURES • Fully Control Light Levels for Both Occupied and Unoccupied
Areas with High/Low, User Selectable Bi-Level Dimming (USBD/HL) Option, to Help Maintain Life Safety Codes without Having to Open the Fixture.
• Impact Resistant Radial Designed Lens - Internal Linear Ribbed, 25% DR Acrylic
• 5 Year Warranty • DesignLights Consortium® Qualified (2)
Cavern Housing - .060” Aluminum Body - .200” 6061 Machined Aluminum End Plates - .500” Threaded End Plug - Baked on Enamel Powder Coat Finish
Cavern Lite Housing - .040 Aluminum Housing - Baked on Pre-Paint Enamel
www.ilp-inc.com Industrial Lighting Products 407-478-3759
OPTIONS
C4-80WLED-UNIV
SUMMARY DATA
PLANE AND CONE DIAGRAM
Photometric values based upon tests performed in compliance with LM-79. IES files can be downloaded at www.ilp-inc.com
LUMINAIRE OUTPUT = 5988 LMS120VAC, 672.1mA 80.08W, 0.9923PF
HEMISPHERES TESTED: BOTHEFFICIENCY (Total): 100.0 %EFFICIENCY (Down / Up): 95.1 % / 4.9 %EFFICIENCY (Street / House): 53.3 % / 46.7 %ROADWAY CLASSIFICATION: TYPE III, VERY SHORTCUTOFF CLASSIFICATION: NONCUTOFF
972.1995 :PMAL/SNEMUL 1 :SPMAL FO .ON
LUMINOUS OPENING: RECTANGULAR)teeF( 24.0 :htdiW
Length: 4.0060.0 :thgieH
1.08 :STTAW TUPNI
10 20 30 40
50
60
70
80
90
100
110
120
130
140 150 160 170 170 160 150 140
130
120
110
100
90
80
70
60
50
40 30 20 10
1000
2000
MAX CANDLEPOWER: 1903.9 Max plane at H = 135 Max cone at V = 5
CAVERN / CAVERN LITE - 80WULTRASONIC STAIRWELL
USER CONTROLLED DIMMING (USDC) GIVES YOU THE ABILITY TO ADJUST THE LIGHT LEVEL BY SIMPLY TURNING AN INTERNAL CONTROL
- Fully Control the Minimum Light Level for the Occupied &
Unoccupied Modes
- Dimmable down to 10%.
- Internal dim control can be accessed without disassembling
the fixture.
LED BATTERY BACKUP OPTION (LEDBB)
- Allows the fixture to remain fully functional as an Emergency Light
during power failures.
ULTRASONIC SENSOR CONTROL IS INSTALLED WHEN THE (FIOS) OPTION IS ORDERED
- Ultrasonic detection operates by transmitting sound waves
throughout an area and measuring the speed at which they return.
Movement increases the return frequency, which
triggers occupancy.
- Fail on mode can be set to ensure the lamps come on to 100%
in the event of a control failure.
- Burn in and test modes are available for installation and servicing.
(Instructions can be down loaded from the Cavern web page)
www.ilp-inc.com Industrial Lighting Products 407-478-3759
ORDERING GUIDE:
Project Name:
Fixture tyPe:
LamPs/Board:
cataLog NumBer:
VoLts/Watts:
WT 40WLED UNIV 5000K eg: RAFL
Series LED Driver Color Options � WT Amazon 4ft � 40WLED 1x36 Board � UNIV 120-277 Driver � 3000K* � RPCL Ribbed Polycarbonate Lens (4 ft Only)
� 4000K � RAFL Ribbed Acrylic Frosted Lens (recommended)
� 5000K � DPCL Deep Clear Lens � DPFL Deep Frosted Lens � CORDWx Wet Location Strain Relief Cord (X = ft)
� LEDBB LED Battery Backup (may reduce max ambient)
� SD480 480V Step Down Transformer � SS Stainless Steel Latches � TPS Tamper Proof Screws � DIM 0-10V Dimmable Driver � FIOS On/Off Occupancy Sensor Installed � FIOSPC On/Off Occupancy Sensor w/ Photocell � USDC User Selectable Dimming Control � USBD User Select Bi-level Dim w/ Occ. Sensor � BDxx Preset Bi-level Dim Sensor (xx=% eg. 20,30)
� BDxxPC Preset Bi-level Dim Sensor w/ Photocell � DHPC Daylight Harvesting � PCxxx Photocell (xxx = Voltage)
WET LOCATION
AMAZON - 40W LED
SUITABLE APPLICATIONS • Parking Garage • Food Processing and Preparation
(SS Latches) • Pool Areas (SS Latches) • Car Washes (SS Latches)
FEATURES • 4 Foot Enclosure • Suitable for Wall or Ceiling Mount • Impact Resistant, Ribbed Acrylic Clear Lens (Std), Ribbed
Acrylic Frosted (RAF), Ribbed Polycarbonate (PC-4ft Only) Deep Clear Lens (DCL) or Deep Frosted Lens (DFL) Options
• Continuous Poured, Closed Cell Polyurethane Gasket • Stainless Steel Mounting Brackets for Drill Free Mounting • Polycarbonate Latches* (Std), Stainless Steel (SS) Optional • Tamper Proof Screws (TPS) Optional
• 5 Year Warranty • Fiberglass Body Attributes
- IP65, IP66 & IP67 (Dust Tight, Low Pressure Water Jets, High Pressure Water Jets, and Immerse 1M)
- NEMA4 & NSF Rated Components, 5VA Flame Rating - UL Listed / Wet Locations, (F1) Rated for Outdoor Use
LED SYSTEMBoard (Nichia Chips) 1 x 36Calculated L70 (TM-21) 71,000 hoursDelivered Lumens 3,285 lmTotal Input Watts 46.09 WLuminaire Efficacy Rating (LER) 71.27 lm/WCorrelated Color Temperature (CCT) 5000 KColor Rendering Index (CRI) > 80Max Ambient Temp 120˚ FUniversal Driver 120-277 V
*Stainless Steel latches are recommended for the following applications: swimming pools due to chlorine, food processing due to cleaning chemicals, car washes due to chemicals used, agriculture due to ammonia
*Call for Availability
Optional Deep Frosted Lens(DPFL)
REPLACES 2T12, 2T8, or 150W MH
LED System data above based on WT-40WLED-UNIV-5000K(1) LED Lumen Maintenance Estimates based on TM-21 projections for the light source at 25˚C ambient
5 Y E A R W A R RA
NT
Y
www.ilp-inc.com Industrial Lighting Products 407-478-3759
MOUNTING OPTIONS
WT-40WLED-UNIV
SUMMARY DATA
PLANE AND CONE DIAGRAM
Photometric values based upon tests performed in compliance with LM-79. IES files can be downloaded at www.ilp-inc.com
LUMINAIRE OUTPUT = 3282 LMS120VAC, 384.79mA 46.087W, 0.9979PF
HEMISPHERES TESTED: BOTHEFFICIENCY (Total): 100.0 %EFFICIENCY (Down / Up): 96.1 % / 3.9 %EFFICIENCY (Street / House): 51.7 % / 48.3 %ROADWAY CLASSIFICATION: TYPE VSCUTOFF CLASSIFICATION: SEMICUTOFF
166.4823 :PMAL/SNEMUL 1 :SPMAL FO .ON
LUMINOUS OPENING: RECTANGULAR)teeF( 71.4 :htdiW
Length: 0.5000.0 :thgieH
1.64 :STTAW TUPNI
10 20 30 40
50
60
70
80
90
100
110
120
130
140 150 160 170 170 160 150 140
130
120
110
100
90
80
70
60
50
40 30 20 10
1000
2000
MAX CANDLEPOWER: 1775.8 Max plane at H = 135 Max cone at V = 10
AMAZON - 40W LEDWET LOCATION
Lineal Ribbed Diffuser 4’ and 8’ Lengths
Frosted Lens 4’ and 8’ Lengths
Nominal Length Width Length Depth
Lineal Ribbed Diffuser
Wide (2 Light)
4’ 6.40” 51.37” 4.25”
8’ 6.40” 99.50” 4.25”
Frosted Lens
4’ 6.40” 51.37” 5.63”
8’ 6.40” 99.50” 5.63”
Drill-Free Stainless Steel Mounting Brackets
• SS Mounting Brackets for drill-free surface mounting (2 brackets standard)
• Fixture Mounting Box (FMB) - Includes rigid box to attach to the fixture, provides for single point mounting to accept a pendant, hook, or conduit hub (sold separately).
FMB HUB 3/4 CONDUIT
HOOK
www.ilp-inc.com Industrial Lighting Products 407-478-3759
ORDERING GUIDE:
Project Name:
Fixture tyPe:
LamPs/Board:
cataLog NumBer:
VoLts/Watts:
WT 80WLED UNIV 5000K eg: RAFL
Series LED Driver Color Options � WT Amazon 4ft � 80WLED 2x36 Boards � UNIV 120-277 Driver � 3000K* � RPCL Ribbed Polycarbonate Lens (4 ft Only)
� 4000K � RAFL Ribbed Acrylic Frosted Lens (recommended)
� 5000K � DPCL Deep Clear Lens � DPFL Deep Frosted Lens � CORDWx Wet Location Strain Relief Cord (X = ft)
� LEDBB LED Battery Backup (may reduce max ambient)
� SD480 480V Step Down Transformer � SS Stainless Steel Latches � TPS Tamper Proof Screws � DIM 0-10V Dimmable Driver � FIOS On/Off Occupancy Sensor Installed � FIOSPC On/Off Occupancy Sensor w/ Photocell � USDC User Selectable Dimming Control � USBD User Select Bi-level Dim w/ Occ. Sensor � BDxx Preset Bi-level Dim Sensor (xx=% eg. 20,30)
� BDxxPC Preset Bi-level Dim Sensor w/ Photocell � DHPC Daylight Harvesting � PCxxx Photocell (xxx = Voltage)
AMAZON - 80W LEDWET LOCATION
SUITABLE APPLICATIONS • Parking Garage • Food Processing and Preparation
(SS Latches) • Pool Areas (SS Latches) • Car Washes (SS Latches)
FEATURES • 4 Foot Enclosure • Suitable for Wall or Ceiling Mount • Impact Resistant, Ribbed Acrylic Clear Lens (Std), Ribbed
Acrylic Frosted (RAF), Ribbed Polycarbonate (PC-4ft Only) Deep Clear Lens (DCL) or Deep Frosted Lens (DFL) Options
• Continuous Poured, Closed Cell Polyurethane Gasket • Stainless Steel Mounting Brackets for Drill Free Mounting • Polycarbonate Latches* (Std), Stainless Steel (SS) Optional • Tamper Proof Screws (TPS) Optional
• 5 Year Warranty • Fiberglass Body Attributes
- IP65, IP66 & IP67 (Dust Tight, Low Pressure Water Jets, High Pressure Water Jets, and Immerse 1M)
- NEMA4 & NSF Rated Components, 5VA Flame Rating - UL Listed / Wet Locations, (F1) Rated for Outdoor Use
LED SYSTEMBoard (Nichia Chips) 2 x 36Calculated L70 (TM-21) 57,000 hoursDelivered Lumens 5,673 lmTotal Input Watts 79.94 WLuminaire Efficacy Rating (LER) 70.97 lm/WCorrelated Color Temperature (CCT) 5000 KColor Rendering Index (CRI) > 80Max Ambient Temp 100˚ FUniversal Driver 120-277 V
*Stainless Steel latches are recommended for the following applications: swimming pools due to chlorine, food processing due to cleaning chemicals, car washes due to chemicals used, agriculture due to ammonia
*Call for Availability
Optional Deep Frosted Lens(DPFL)
REPLACES 2T5HO, 175W MH
LED System data above based on WT-80WLED-UNIV-5000K(1) LED Lumen Maintenance Estimates based on TM-21 projections for the light source at 25˚C ambient
5 Y E A R W A R RA
NT
Y
www.ilp-inc.com Industrial Lighting Products 407-478-3759
MOUNTING OPTIONS
WT-80WLED-UNIV
SUMMARY DATA
PLANE AND CONE DIAGRAM
Photometric values based upon tests performed in compliance with LM-79. IES files can be downloaded at www.ilp-inc.com
LUMINAIRE OUTPUT = 5668 LMS120VAC, 671.3mA 79.94W, 0.9922PF
HEMISPHERES TESTED: BOTHEFFICIENCY (Total): 100.0 %EFFICIENCY (Down / Up): 92.7 % / 7.3 %EFFICIENCY (Street / House): 55.1 % / 44.9 %ROADWAY CLASSIFICATION: TYPE II, VERY SHORTCUTOFF CLASSIFICATION: NONCUTOFF
358.0765 :PMAL/SNEMUL 1 :SPMAL FO .ON
LUMINOUS OPENING: RECTANGULAR)teeF( 45.0 :htdiW
Length: 4.2990.0 :thgieH
9.97 :STTAW TUPNI
10 20 30 40
50
60
70
80
90
100
110
120
130
140 150 160 170 170 160 150 140
130
120
110
100
90
80
70
60
50
40 30 20 10
1000
2000
MAX CANDLEPOWER: 2185.5 Max plane at H = 180 Max cone at V = 15
AMAZON - 80W LEDWET LOCATION
Lineal Ribbed Diffuser 4’ and 8’ Lengths
Frosted Lens 4’ and 8’ Lengths
Nominal Length Width Length Depth
Lineal Ribbed Diffuser
Wide (2 Light)
4’ 6.40” 51.37” 4.25”
8’ 6.40” 99.50” 4.25”
Frosted Lens
4’ 6.40” 51.37” 5.63”
8’ 6.40” 99.50” 5.63”
Drill-Free Stainless Steel Mounting Brackets
• SS Mounting Brackets for drill-free surface mounting (2 brackets standard)
• Fixture Mounting Box (FMB) - Includes rigid box to attach to the fixture, provides for single point mounting to accept a pendant, hook, or conduit hub (sold separately).
FMB HUB 3/4 CONDUIT
HOOK
www.ilp-inc.com Industrial Lighting Products 407-478-3759
ORDERING GUIDE:
Project Name:
Fixture tyPe:
LamPs/Board:
cataLog NumBer:
VoLts/Watts:
WT8 80WLED UNIV 5000K eg: RAFL
Series LED Driver Color Options � WT8 Amazon 8ft � 80WLED 2x36 Boards � UNIV 120-277 Driver � 3000K* � RPCL Ribbed Polycarbonate Lens (4 ft Only)
� 4000K � RAFL Ribbed Acrylic Frosted Lens (recommended)
� 5000K � DPCL Deep Clear Lens � DPFL Deep Frosted Lens � CORDWx Wet Location Strain Relief Cord (X = ft)
� LEDBB LED Battery Backup (may reduce max ambient)
� SD480 480V Step Down Transformer � SS Stainless Steel Latches � TPS Tamper Proof Screws � DIM 0-10V Dimmable Driver � FIOS On/Off Occupancy Sensor Installed � FIOSPC On/Off Occupancy Sensor w/ Photocell � USDC User Selectable Dimming Control � USBD User Select Bi-level Dim w/ Occ. Sensor � BDxx Preset Bi-level Dim Sensor (xx=% eg. 20,30)
� BDxxPC Preset Bi-level Dim Sensor w/ Photocell � DHPC Daylight Harvesting � PCxxx Photocell (xxx = Voltage)
WET LOCATION
AMAZON 8FT - 80W LED
SUITABLE APPLICATIONS • Parking Garage • Food Processing and Preparation
(SS Latches) • Pool Areas (SS Latches) • Car Washes (SS Latches)
FEATURES • 8 Foot Enclosure • Suitable for Wall or Ceiling Mount • Impact Resistant, Ribbed Acrylic Clear Lens (Std), Ribbed
Acrylic Frosted (RAF), Ribbed Polycarbonate (PC-4ft Only) Deep Clear Lens (DCL) or Deep Frosted Lens (DFL) Options
• Continuous Poured, Closed Cell Polyurethane Gasket • Stainless Steel Mounting Brackets for Drill Free Mounting • Polycarbonate Latches* (Std), Stainless Steel (SS) Optional • Tamper Proof Screws (TPS) Optional
• 5 Year Warranty • Fiberglass Body Attributes
- IP65, IP66 & IP67 (Dust Tight, Low Pressure Water Jets, High Pressure Water Jets, and Immerse 1M)
- NEMA4 & NSF Rated Components, 5VA Flame Rating - UL Listed / Wet Locations, (F1) Rated for Outdoor Use
LED SYSTEMBoard (Nichia Chips) 2 x 36Calculated L70 (TM-21) 71,000 hoursDelivered Lumens 5,673 lmTotal Input Watts 79.94 WLuminaire Efficacy Rating (LER) 70.97 lm/WCorrelated Color Temperature (CCT) 5000 KColor Rendering Index (CRI) > 80Max Ambient Temp 120˚ FUniversal Driver 120-277 V
*Stainless Steel latches are recommended for the following applications: swimming pools due to chlorine, food processing due to cleaning chemicals, car washes due to chemicals used, agriculture due to ammonia
*Call for Availability
Optional Deep Frosted Lens(DPFL)
REPLACES 2T12, 2T5HO, or 175W MH
LED System data above based on WT-80WLED-UNIV-5000K(1) LED Lumen Maintenance Estimates based on TM-21 projections for the light source at 25˚C ambient
5 Y E A R W A R RA
NT
Y
www.ilp-inc.com Industrial Lighting Products 407-478-3759
MOUNTING OPTIONS
WT-40WLED-UNIV
SUMMARY DATA
PLANE AND CONE DIAGRAM
Photometric values based upon tests performed in compliance with LM-79. IES files can be downloaded at www.ilp-inc.com
LUMINAIRE OUTPUT = 3282 LMS120VAC, 384.79mA 46.087W, 0.9979PF
HEMISPHERES TESTED: BOTHEFFICIENCY (Total): 100.0 %EFFICIENCY (Down / Up): 96.1 % / 3.9 %EFFICIENCY (Street / House): 51.7 % / 48.3 %ROADWAY CLASSIFICATION: TYPE VSCUTOFF CLASSIFICATION: SEMICUTOFF
166.4823 :PMAL/SNEMUL 1 :SPMAL FO .ON
LUMINOUS OPENING: RECTANGULAR)teeF( 71.4 :htdiW
Length: 0.5000.0 :thgieH
1.64 :STTAW TUPNI
10 20 30 40
50
60
70
80
90
100
110
120
130
140 150 160 170 170 160 150 140
130
120
110
100
90
80
70
60
50
40 30 20 10
1000
2000
MAX CANDLEPOWER: 1775.8 Max plane at H = 135 Max cone at V = 10
AMAZON 8FT - 80W LEDWET LOCATION
Lineal Ribbed Diffuser 4’ and 8’ Lengths
Frosted Lens 4’ and 8’ Lengths
Nominal Length Width Length Depth
Lineal Ribbed Diffuser
Wide (2 Light)
4’ 6.40” 51.37” 4.25”
8’ 6.40” 99.50” 4.25”
Frosted Lens
4’ 6.40” 51.37” 5.63”
8’ 6.40” 99.50” 5.63”
Drill-Free Stainless Steel Mounting Brackets
• SS Mounting Brackets for drill-free surface mounting (2 brackets standard)
• Fixture Mounting Box (FMB) - Includes rigid box to attach to the fixture, provides for single point mounting to accept a pendant, hook, or conduit hub (sold separately).
FMB HUB 3/4 CONDUIT
HOOK
www.ilp-inc.com Industrial Lighting Products 407-478-3759
ORDERING GUIDE:
Project Name:
Fixture tyPe:
LamPs/Board:
cataLog NumBer:
VoLts/Watts:
WT8 160WLED UNIV 5000K eg: RAFL
Series LED Driver Color Options � WT8 Amazon 8ft � 160WLED 4x36 Boards � UNIV 120-277 Driver � 3000K* � RPCL Ribbed Polycarbonate Lens (4 ft Only)
� 4000K � RAFL Ribbed Acrylic Frosted Lens (recommended)
� 5000K � DPCL Deep Clear Lens � DPFL Deep Frosted Lens � CORDWx Wet Location Strain Relief Cord (X = ft)
� LEDBB LED Battery Backup (may reduce max ambient)
� SD480 480V Step Down Transformer � SS Stainless Steel Latches � TPS Tamper Proof Screws � DIM 0-10V Dimmable Driver � FIOS On/Off Occupancy Sensor Installed � FIOSPC On/Off Occupancy Sensor w/ Photocell � USDC User Selectable Dimming Control � USBD User Select Bi-level Dim w/ Occ. Sensor � BDxx Preset Bi-level Dim Sensor (xx=% eg. 20,30)
� BDxxPC Preset Bi-level Dim Sensor w/ Photocell � DHPC Daylight Harvesting � PCxxx Photocell (xxx = Voltage)
AMAZON 8FT - 160W LEDWET LOCATION
Optional Deep Frosted Lens(DPFL)
SUITABLE APPLICATIONS • Parking Garage • Food Processing and Preparation
(SS Latches) • Pool Areas (SS Latches) • Car Washes (SS Latches)
FEATURES • 8 Foot Enclosure • Suitable for Wall or Ceiling Mount • Impact Resistant, Ribbed Acrylic Clear Lens (Std), Ribbed
Acrylic Frosted (RAF), Ribbed Polycarbonate (PC-4ft Only) Deep Clear Lens (DCL) or Deep Frosted Lens (DFL) Options
• Continuous Poured, Closed Cell Polyurethane Gasket • Stainless Steel Mounting Brackets for Drill Free Mounting • Polycarbonate Latches* (Std), Stainless Steel (SS) Optional • Tamper Proof Screws (TPS) Optional
• 5 Year Warranty • Fiberglass Body Attributes
- IP65, IP66 & IP67 (Dust Tight, Low Pressure Water Jets, High Pressure Water Jets, and Immerse 1M)
- NEMA4 & NSF Rated Components, 5VA Flame Rating - UL Listed / Wet Locations, (F1) Rated for Outdoor Use
LED SYSTEMBoard (Nichia Chips) 4 x 36Calculated L70 (TM-21) 57,000 hoursDelivered Lumens 11,346 lmTotal Input Watts 159.88 WLuminaire Efficacy Rating (LER) 70.97 lm/WCorrelated Color Temperature (CCT) 5000 KColor Rendering Index (CRI) > 80Max Ambient Temp 100˚ FUniversal Driver 120-277 V
*Stainless Steel latches are recommended for the following applications: swimming pools due to chlorine, food processing due to cleaning chemicals, car washes due to chemicals used, agriculture due to ammonia
*Call for Availability
REPLACES 2T12HO, 4T5HO, or 250W MH
LED System data above based on WT-80WLED-UNIV-5000K(1) LED Lumen Maintenance Estimates based on TM-21 projections for the light source at 25˚C ambient
5 Y E A R W A R RA
NT
Y
www.ilp-inc.com Industrial Lighting Products 407-478-3759
MOUNTING OPTIONS
WT-80WLED-UNIV
SUMMARY DATA
PLANE AND CONE DIAGRAM
Photometric values based upon tests performed in compliance with LM-79. IES files can be downloaded at www.ilp-inc.com
LUMINAIRE OUTPUT = 5668 LMS120VAC, 671.3mA 79.94W, 0.9922PF
HEMISPHERES TESTED: BOTHEFFICIENCY (Total): 100.0 %EFFICIENCY (Down / Up): 92.7 % / 7.3 %EFFICIENCY (Street / House): 55.1 % / 44.9 %ROADWAY CLASSIFICATION: TYPE II, VERY SHORTCUTOFF CLASSIFICATION: NONCUTOFF
358.0765 :PMAL/SNEMUL 1 :SPMAL FO .ON
LUMINOUS OPENING: RECTANGULAR)teeF( 45.0 :htdiW
Length: 4.2990.0 :thgieH
9.97 :STTAW TUPNI
10 20 30 40
50
60
70
80
90
100
110
120
130
140 150 160 170 170 160 150 140
130
120
110
100
90
80
70
60
50
40 30 20 10
1000
2000
MAX CANDLEPOWER: 2185.5 Max plane at H = 180 Max cone at V = 15
AMAZON 8FT - 160W LEDWET LOCATION
Lineal Ribbed Diffuser 4’ and 8’ Lengths
Frosted Lens 4’ and 8’ Lengths
Nominal Length Width Length Depth
Lineal Ribbed Diffuser
Wide (2 Light)
4’ 6.40” 51.37” 4.25”
8’ 6.40” 99.50” 4.25”
Frosted Lens
4’ 6.40” 51.37” 5.63”
8’ 6.40” 99.50” 5.63”
Drill-Free Stainless Steel Mounting Brackets
• SS Mounting Brackets for drill-free surface mounting (2 brackets standard)
• Fixture Mounting Box (FMB) - Includes rigid box to attach to the fixture, provides for single point mounting to accept a pendant, hook, or conduit hub (sold separately).
FMB HUB 3/4 CONDUIT
HOOK
Ordering Guide
Project Name:
Fixture tyPe:
LamPs/Board:
cataLog NumBer:
VoLts/Watts:
5 Y E A R W A R RA
NT
Y
www.ilp-inc.com Industrial Lighting Products 407-478-3759
F102 4.3 30WLED UNIV 5000K eg: LEDBB - STAG
Series Width LED Driver Color Options
□ F102 Channel 2ft □ 4.3 □ 20WLED 2x28 Boards □ UNIV 120-277 Driver □ 2700K* □ STAG Staggered Configuration□ 4.5 □ 30WLED 2x28 Boards □ 3000K* □ CHAN Channel Housing□ 5.0 □ 3500K* □ FRLK Frosted Lens Kit□ CUST □ 4000K □ CoRDx Cord (X = ft)
□ 5000K □ LEDBB LED Battery Backup (may reduce max ambient)□ QDCx Quick Disconnect Cord (X = ft)□ SD480 480V Step Down Transformer□ VC V-Clips□ HB-XX-PAD Y-Toggle Cable System (XX = in)□ DIM 0-10V Dimmable Driver□ FIoS On/Off Occupancy Sensor Installed□ FIoSPC On/Off Occupancy Sensor w/ Photocell□ USDC User Selectable Dimming Control□ USBD User Select Bi-level Dim w/ Occ. Sensor □ BDxx Preset Bi-level Dim Sensor (xx=% eg. 20,30)□ BDxxPC Preset Bi-level Dim Sensor w/ Photocell□ DHPC Daylight Harvesting□ PC Photocell□ WC 11 Ga Wire Cage
Suitable aPPliCatiONS • Cove Lighting • Warehouse • Distribution Centers • Retail Applications • Manufacturing Facilities
FeatuReS • The Low Profile LED Channel Can Be Installed as a
New Fixture or as an Upgrade • 2 ft Configuration, Custom Lengths Available • 4.3 in. Standard Width, Custom Widths Available • Durable Aluminum Construction • Multiple Dimming and Sensor Options to Fully Control
Occupied and Unoccupied Light Levels • 5000K Color Temp (Std), Custom Color Temps
Available (e.g. 3000K, 4000K) • 5 Year Warranty • ETL Damp Listed • DesignLights Consortium® Qualified (2)
COMMErCIAL
2Ft lOw PROFile ChaNNel - 20w & 30w leD
*Call for Availability
leD SYSteM 20W System 30W System
Board (LG Chips) 2X28 2X28Calculated L70 (TM-21) > 100K hrs > 100K hrsDelivered Lumens 2,148 lm 3,298 lmTotal Input Watts 19.3 W 30.6 WLuminaire Efficacy rating (LEr) 111.30 lm/W 107.78 lm/WCorrelated Color Temperature (CCT) 5000 K 5000 KColor rendering Index (CrI) > 80 > 80Max Ambient Temp 110˚ F 105˚ FUniversal Driver 120-277 V 120-277 V
LED System data above based on F102-3.5-20WLED-UNIV-5000K & F102-3.5-30WLED-UNIV-5000K(1) LED Lumen Maintenance Estimates based on TM-21 projections for the light source at 25˚C ambient(2) Specific Configurations Listed on DLC.(3) DLC Qualified Products Only as Complete Luminaire.
RePlaCeS 2t8-F17or 150w Mh
(3)
www.ilp-inc.com Industrial Lighting Products 407-478-3759
COMMErCIAL
2Ft lOw PROFile ChaNNel
Frosted Lens Kit (FrLK) Option
Channel Housing (CHAN) Option
Low Profile LED Channel
Ballast Cover (for stand-alone fixture)
DIMENSIONS • 4.43 in. x 24 in. x 1.250 in. - without Lens Option • 4.43 in. x 24 in. x 1.673 in. - with Lens Option • 4.43 in. x 24 in. x 1.950 in. - with CHAN Option
• V-Clips for dual point chain or cable hanging
• Y-Toggle Cable Kit - Includes 2 adjustable cable hangers
HB-XX-PADV-Clips
Custom Stagger (STAG) OptionPlease Provide the Following Dimensions
Length = ______Width = ______Stagger = ______
L
W
S
F102-30WLED-UNIV-5000K
SUMMARY DATA
PLANE AND CONE DIAGRAM
Photometric values based upon tests performed in compliance with LM-79. IES files can be downloaded at www.ilp-inc.com
LUMINAIRE OUTPUT = 3196 LMS120.0V 0.2601A 30.64W PF= 0.982
HEMISPHERES TESTED: LOWEREFFICIENCY (Total): 100.0 %EFFICIENCY (Downlight): 100.0 %CIE CLASSIFICATION: DIRECTSPACING CRITERION (0-Deg.): 1.29SPACING CRITERION (90-Deg.): 1.29
440.9913 :PMAL/SNEMUL 1 :SPMAL FO .ON
LUMINOUS OPENING: RECTANGULAR)teeF( 13.0 :htdiW
Length: 2.0000.0 :thgieH
6.03 :STTAW TUPNI
10 20 30 40
50
60
70
80
90
150
300
450
600
750
900
Quadralaterally Symmetric Solid: 0 Degrees Small Dash: 45 Degrees Large Dash: 90 Degrees
MOuNtiNG OPtiONS
Ordering Guide
Project Name:
Fixture tyPe:
LamPs/Board:
cataLog NumBer:
VoLts/Watts:
5 Y E A R W A R RA
NT
Y
www.ilp-inc.com Industrial Lighting Products 407-478-3759
F104 4.3 30WLED UNIV 5000K eg: LEDBB - CUST2700
Series Width LED Driver Color Options□ F104 Channel 4ft □ 4.3 □ 30WLED 2x28 Boards □ UNIV 120-277 Driver □ 3500K* □ STAG Staggered Configuration
□ 4.5 □ 4000K □ CHAN Channel Housing□ 5.0 □ 5000K □ FRLK Frosted Lens Kit□ CUST □ CoRDx Cord (X = ft)
□ LEDBB LED Battery Backup (may reduce max ambient)□ QDCx Quick Disconnect Cord (X = ft)□ SD480 480V Step Down Transformer□ VC V-Clips□ HB-XX-PAD Y-Toggle Cable System (XX = in)□ DIM 0-10V Dimmable Driver□ FIoS On/Off Occupancy Sensor Installed□ FIoSPC On/Off Occupancy Sensor w/ Photocell□ USDC User Selectable Dimming Control□ USBD User Select Bi-level Dim w/ Occ. Sensor □ BDxx Preset Bi-level Dim Sensor (xx=% eg. 20,30)□ BDxxPC Preset Bi-level Dim Sensor w/ Photocell□ DHPC Daylight Harvesting□ PC Photocell□ WC 11 Ga Wire Cage
Suitable aPPliCatiONS • Cove Lighting • Warehouse • Distribution Centers • Retail Applications • Manufacturing Facilities
FeatuReS • The Low Profile LED Channel Can Be Installed as a
New Fixture or as an Upgrade • 4 ft Configuration, Custom Lengths Available • 4.3 in. Standard Width, Custom Widths Available • Durable Aluminum Construction • Multiple Dimming and Sensor Options to Fully Control
Occupied and Unoccupied Light Levels • 5000K Color Temp (Std), Custom Color Temps
Available (e.g. 3000K, 4000K) • 5 Year Warranty • ETL Damp Listed • DesignLights Consortium® Qualified (2)
COMMERCIALlOw PROFile ChaNNel - 30w leD
RePlaCeS 2t12, 2t8, or 150w Mh
leD SYSteMBoard (LG Chips) 2 x 28Calculated L70 (TM-21) > 100,000 hrsDelivered Lumens 3,194 lmTotal Input Watts 30.42 WLuminaire Efficacy Rating (LER) 105 lm/WCorrelated Color Temperature (CCT) 5000 KColor Rendering Index (CRI) > 80Max Ambient Temp 110˚ FUniversal Driver 120-277 V
Low Profile Channel
Channel with Housing (CHAN) Option
*Call for Availability
LED System data above based on F104-3.5-30WLED-UNIV-5000K-CHAN(1) LED Lumen Maintenance Estimates based on TM-21 projections for the light source at 25˚C ambient(2) Specific Configurations Listed on DLC.(3) DLC Qualified Products Only as Complete Luminaire.
(3)
www.ilp-inc.com Industrial Lighting Products 407-478-3759
MOUNTING OPTIONS
COMMERCIAL
lOw PROFile ChaNNel - 30w leD
Custom Stagger (STAG) OptionPlease Provide the Following Dimensions
Length = ______Width = ______Stagger = ______
L
WS
Frosted Lens Kit (FRLK) Option
Channel Housing (CHAN) Option
Low Profile LED Channel
Ballast Cover (for stand-alone fixture)
DiMeNSiONS • 4.3 in. x 48 in. x 1.250 in. - without Lens Option • 4.3 in. x 48 in. x 1.673 in. - with Lens Option • 4.3 in. x 48 in. x 1.950 in. - with CHAN Option
• V-Clips for dual point chain or cable hanging • Y-Toggle Cable Kit - Includes 2 adjustable cable hangers
HB-XX-PADV-Clips
F104-30WLED-UNIV
SUMMARY DATA
PLANE AND CONE DIAGRAM
Photometric values based upon tests performed in compliance with LM-79. IES files can be downloaded at www.ilp-inc.com
LUMINAIRE OUTPUT = 3159 LMS120.0V 0.2592A 30.46W PF=0.979
HEMISPHERES TESTED: LOWEREFFICIENCY (Total): 100.0 %EFFICIENCY (Downlight): 100.0 %SPACING CRITERION (0-Deg.): 1.25SPACING CRITERION (90-Deg.): 1.28
590.9513 :PMAL/SNEMUL 1 :SPMAL FO .ON
LUMINOUS OPENING: RECTANGULAR)teeF( 50.0 :htdiW
Length: 4.0000.0 :thgieH
5.03 :STTAW TUPNI
10 20 30 40
50
60
70
80
90
150
300
450
600
750
900
1050
Quadralaterally Symmetric Solid: 0 Degrees Small Dash: 45 Degrees Large Dash: 90 Degrees
Ordering Guide
Project Name:
Fixture tyPe:
LamPs/Board:
cataLog NumBer:
VoLts/Watts:
5 Y E A R W A R RA
NT
Y
www.ilp-inc.com Industrial Lighting Products 407-478-3759
F104 4.3 40WLED UNIV 5000K eg: LEDBB - CUST2700
Series Width LED Driver Color Options � F104 Channel 4ft � 4.3 � 40WLED 1x36 Board � UNIV 120-277 Driver � 3000K* � STAG Staggered Configuration
� 4.5 � 4000K** � CHAN Channel Housing � 5.0 � 5000K � FRLK** Frosted Lens Kit � CUST � CoRDx Cord (X = ft)
� LEDBB LED Battery Backup (may reduce max ambient) � QDCx Quick Disconnect Cord (X = ft) � SD480 480V Step Down Transformer � VC V-Clips � HB-XX-PAD Y-Toggle Cable System (XX = in) � DIM 0-10V Dimmable Driver � FIoS On/Off Occupancy Sensor Installed � FIoSPC On/Off Occupancy Sensor w/ Photocell � USDC User Selectable Dimming Control � USBD User Select Bi-level Dim w/ Occ. Sensor � BDxx Preset Bi-level Dim Sensor (xx=% eg. 20,30) � BDxxPC Preset Bi-level Dim Sensor w/ Photocell � DHPC Daylight Harvesting � PC Photocell � WC 11 Ga Wire Cage
Suitable aPPliCatiONS • Cove Lighting • Warehouse • Distribution Centers • Retail Applications • Manufacturing Facilities
FeatuReS • The Low Profile LED Channel Can Be Installed as a
New Fixture or as an Upgrade • 4 ft Configuration, Custom Lengths Available • 4.3 in. Standard Width, Custom Widths Available • Durable Aluminum Construction • Multiple Dimming and Sensor Options to Fully Control
Occupied and Unoccupied Light Levels • 5000K Color Temp (Std), Custom Color Temps
Available (e.g. 3000K, 4000K) • 5 Year Warranty • ETL Damp Listed • Energy Star Certified (2)
COMMERCIALlOw PROFile ChaNNel - 40w leD
leD SYSteMBoard (Nichia Chips) 1 x 36Calculated L70 (TM-21) 77,000 hoursDelivered Lumens 3,867 lmTotal Input Watts 45.46 WLuminaire Efficacy Rating (LER) 85.06 lm/WCorrelated Color Temperature (CCT) 5000 KColor Rendering Index (CRI) > 80Max Ambient Temp 120˚ FUniversal Driver 120-277 V
LED System data above based on F104-4.3-40WLED-UNIV-5000K(1) LED Lumen Maintenance Estimates based on TM-21 projections for the light source at 25˚C ambient(2) Specific Configurations Certified by Energy Star.
*Call for Availability**Energy Star Configuration
Low Profile Channel
Channel with Housing (CHAN) Option
RePlaCeS 2t12, 2t8, or 150w Mh
www.ilp-inc.com Industrial Lighting Products 407-478-3759
MOUNTING OPTIONS
Frosted Lens Kit (FRLK) Option
Channel Housing (CHAN) Option
Low Profile LED Channel
Ballast Cover (for stand-alone fixture)
COMMERCIAL
lOw PROFile ChaNNel - 40w leD
DiMeNSiONS • 4.3 in. x 48 in. x 1.250 in. - without Lens Option • 4.3 in. x 48 in. x 1.673 in. - with Lens Option • 4.3 in. x 48 in. x 1.950 in. - with CHAN Option
F104-40WLED-UNIV
SUMMARY DATA
PLANE AND CONE DIAGRAM
Photometric values based upon tests performed in compliance with LM-79. IES files can be downloaded at www.ilp-inc.com
HEMISPHERES TESTED: BOTHEFFICIENCY (Total): 100.0 %EFFICIENCY (Downlight): 100.0 %EFFICIENCY (Uplight): 0.0 %CIE CLASSIFICATION: DIRECTSPACING CRITERION (0-Deg.): 1.30
818.5683 :PMAL/SNEMUL 1 x 36 :SPMAL FO .ON
LUMINOUS OPENING: RECTANGULAR)teeF( 83.0 :htdiW
Length: 4.0000.0 :thgieH
5.54 :STTAW TUPNI
LUMINAIRE OUTPUT = 3863 LMS120VAC, 379.49mA 45.463W, 0.9980PF
10 20 30 40
50
60
70
80
90
200
400
600
800
1000
1200
Quadralaterally Symmetric Solid: 0 Degrees Small Dash: 45 Degrees Large Dash: 90 Degrees
Custom Stagger (STAG) OptionPlease Provide the Following Dimensions
Length = ______Width = ______Stagger = ______
L
WS
• V-Clips for dual point chain or cable hanging • Y-Toggle Cable Kit - Includes 2 adjustable cable hangers
HB-XX-PADV-Clips
Ordering Guide
Project Name:
Fixture tyPe:
LamPs/Board:
cataLog NumBer:
VoLts/Watts:
5 Y E A R W A R RA
NT
Y
www.ilp-inc.com Industrial Lighting Products 407-478-3759
F104 4.3 60WLED UNIV 5000K eg: LEDBB - CUST2700
Series Width LED Driver Color Options□ F104 Channel 4ft □ 4.3 □ 60WLED 2x56 Boards □ UNIV 120-277 Driver □ 3500K* □ STAG Staggered Configuration
□ 4.5 □ 4000K □ CHAN Channel Housing□ 5.0 □ 5000K □ FRLK Frosted Lens Kit□ CUST □ CoRDx Cord (X = ft)
□ LEDBB LED Battery Backup (may reduce max ambient)□ QDCx Quick Disconnect Cord (X = ft)□ SD480 480V Step Down Transformer□ VC V-Clips□ HB-XX-PAD Y-Toggle Cable System (XX = in)□ DIM 0-10V Dimmable Driver□ FIoS On/Off Occupancy Sensor Installed□ FIoSPC On/Off Occupancy Sensor w/ Photocell□ USDC User Selectable Dimming Control□ USBD User Select Bi-level Dim w/ Occ. Sensor □ BDxx Preset Bi-level Dim Sensor (xx=% eg. 20,30)□ BDxxPC Preset Bi-level Dim Sensor w/ Photocell□ DHPC Daylight Harvesting□ PC Photocell□ WC 11 Ga Wire Cage
Suitable aPPliCatiONS • Cove Lighting • Warehouse • Distribution Centers • Retail Applications • Manufacturing Facilities
FeatuReS
• 4 ft Configuration, Custom Lengths Available • 4.3 in. Standard Width, Custom Widths Available • Durable Aluminum Construction • Multiple Dimming and Sensor Options to Fully Control
Occupied and Unoccupied Light Levels • 5000K Color Temp (Std), Custom Color Temps
Available (e.g. 3000K, 4000K) • 5 Year Warranty • ETL Damp Listed • DesignLights Consortium® Qualified (2)
COMMERCIALlOw PROFile ChaNNel - 60w leD
RePlaCeS 2t12hO, 2t5hO, or 250w Mh
leD SYSteMBoard (LG Chips) 2 x 56Calculated L70 (TM-21) > 100,000 hrsDelivered Lumens 6,045 lmTotal Input Watts 59.27 WLuminaire Efficacy Rating (LER) 102 lm/WCorrelated Color Temperature (CCT) 5000 KColor Rendering Index (CRI) > 80Max Ambient Temp 110˚ FUniversal Driver 120-277 V
Low Profile Channel
Channel with Housing (CHAN) Option
*Call for Availability
LED System data above based on F104-2.5-60WLED-UNIV-5000K-CHAN(1) LED Lumen Maintenance Estimates based on TM-21 projections for the light source at 25˚C ambient(2) Specific Configurations Listed on DLC.(3) DLC Qualified Products Only as Complete Luminaire.
(3)
www.ilp-inc.com Industrial Lighting Products 407-478-3759
MOUNTING OPTIONS
COMMERCIAL
lOw PROFile ChaNNel - 60w leD
Custom Stagger (STAG) OptionPlease Provide the Following Dimensions
Length = ______Width = ______Stagger = ______
L
WS
Frosted Lens Kit (FRLK) Option
Channel Housing (CHAN) Option
Low Profile LED Channel
Ballast Cover (for stand-alone fixture)
DiMeNSiONS • 4.3 in. x 48 in. x 1.250 in. - without Lens Option • 4.3 in. x 48 in. x 1.673 in. - with Lens Option • 4.3 in. x 48 in. x 1.950 in. - with CHAN Option
• V-Clips for dual point chain or cable hanging • Y-Toggle Cable Kit - Includes 2 adjustable cable hangers
HB-XX-PADV-Clips
F104-60WLED-UNIV-5000K
SUMMARY DATA
PLANE AND CONE DIAGRAM
Photometric values based upon tests performed in compliance with LM-79. IES files can be downloaded at www.ilp-inc.com
LUMINAIRE OUTPUT = 5910 LMS120.1V 0.502A 59.76W PF= 0.992
HEMISPHERES TESTED: LOWEREFFICIENCY (Total): 100.0 %EFFICIENCY (Downlight): 100.0 %SPACING CRITERION (0-Deg.): 1.29SPACING CRITERION (90-Deg.): 1.30
821.7195 :PMAL/SNEMUL 1 :SPMAL FO .ON
LUMINOUS OPENING: RECTANGULAR)teeF( 43.0 :htdiW
Length: 0.0500.0 :thgieH
8.95 :STTAW TUPNI
10 20 30 40
50
60
70
80
90
300
600
900
1200
1500
1800
Quadralaterally Symmetric Solid: 0 Degrees Small Dash: 45 Degrees Large Dash: 90 Degrees
Ordering Guide
Project Name:
Fixture tyPe:
LamPs/Board:
cataLog NumBer:
VoLts/Watts:
5 Y E A R W A R RA
NT
Y
www.ilp-inc.com Industrial Lighting Products 407-478-3759
F104 4.3 80WLED UNIV 5000K eg: LEDBB - CUST2700
Series Width LED Driver Color Options□ F104 Channel 4ft □ 4.3 □ 80WLED 2x36 Boards □ UNIV 120-277 Driver □ 3000K* □ STAG Staggered Configuration
□ 4.5 □ 4000K □ CHAN Channel Housing□ 5.0 □ 5000K** □ FRLK Frosted Lens Kit□ CUST □ CoRDx Cord (X = ft)
□ LEDBB LED Battery Backup (may reduce max ambient)□ QDCx Quick Disconnect Cord (X = ft)□ SD480 480V Step Down Transformer□ VC V-Clips□ HB-XX-PAD Y-Toggle Cable System (XX = in)□ DIM 0-10V Dimmable Driver□ FIoS On/Off Occupancy Sensor Installed□ FIoSPC On/Off Occupancy Sensor w/ Photocell□ USDC User Selectable Dimming Control□ USBD User Select Bi-level Dim w/ Occ. Sensor □ BDxx Preset Bi-level Dim Sensor (xx=% eg. 20,30)□ BDxxPC Preset Bi-level Dim Sensor w/ Photocell□ DHPC Daylight Harvesting□ PC Photocell□ WC 11 Ga Wire Cage
Suitable aPPliCatiONS • Cove Lighting • Warehouse • Distribution Centers • Retail Applications • Manufacturing Facilities
FeatuReS • The Low Profile LED Channel Can Be Installed as a
New Fixture or as an Upgrade • 4 ft Configuration, Custom Lengths Available • 4.3 in. Standard Width, Custom Widths Available • Durable Aluminum Construction • Multiple Dimming and Sensor Options to Fully Control
Occupied and Unoccupied Light Levels • 5000K Color Temp (Std), Custom Color Temps
Available (e.g. 3000K, 4000K) • 5 Year Warranty • ETL Damp Listed • DesignLights Consortium® Qualified (2)
COMMERCIALlOw PROFile ChaNNel - 80w leD
leD SYSteMBoard (Nichia Chips) 2 x 36Calculated L70 (TM-21) 71,000 hoursDelivered Lumens 7,297 lmTotal Input Watts 81.32 WLuminaire Efficacy Rating (LER) 89.73 lm/WCorrelated Color Temperature (CCT) 5000 KColor Rendering Index (CRI) > 80Max Ambient Temp 100˚ FUniversal Driver 120-277 V
*Call for Availability**DLC Listed Configuration
Low Profile Channel
Channel with Housing (CHAN) Option
RePlaCeS 2t12hO, 2t5hO, or 250w Mh
LED System data above based on F104-4.3-80WLED-UNIV-5000K(1) LED Lumen Maintenance Estimates based on TM-21 projections for the light source at 25˚C ambient
www.ilp-inc.com Industrial Lighting Products 407-478-3759
MOUNTING OPTIONS
COMMERCIAL
lOw PROFile ChaNNel - 80w leD
Custom Stagger (STAG) OptionPlease Provide the Following Dimensions
Length = ______Width = ______Stagger = ______
L
WS
F104-80WLED-UNIV
SUMMARY DATA
PLANE AND CONE DIAGRAM
Photometric values based upon tests performed in compliance with LM-79. IES files can be downloaded at www.ilp-inc.com
LUMINAIRE OUTPUT = 7291 LMS120VAC, 681.5mA 81.32W, 0.9946PF
HEMISPHERES TESTED: BOTHEFFICIENCY (Total): 100.0 %EFFICIENCY (Downlight): 100.0 %EFFICIENCY (Uplight): 0.0 %CIE CLASSIFICATION: DIRECTSPACING CRITERION (0-Deg.): 1.30
673.4927 :PMAL/SNEMUL 1 :SPMAL FO .ON
LUMINOUS OPENING: RECTANGULAR)teeF( 83.0 :htdiW
Length: 4.0000.0 :thgieH
3.18 :STTAW TUPNI
10 20 30 40
50
60
70
80
90
350
700
1050
1400
1750
2100
Quadralaterally Symmetric Solid: 0 Degrees Small Dash: 45 Degrees Large Dash: 90 Degrees
Frosted Lens Kit (FRLK) Option
Channel Housing (CHAN) Option
Low Profile LED Channel
Ballast Cover (for stand-alone fixture)
DiMeNSiONS • 4.3 in. x 48 in. x 1.250 in. - without Lens Option • 4.3 in. x 48 in. x 1.673 in. - with Lens Option • 4.3 in. x 48 in. x 1.950 in. - with CHAN Option
• V-Clips for dual point chain or cable hanging • Y-Toggle Cable Kit - Includes 2 adjustable cable hangers
HB-XX-PADV-Clips
Ordering Guide
Project Name:
Fixture tyPe:
LamPs/Board:
cataLog NumBer:
VoLts/Watts:
5 Y E A R W A R RA
NT
Y
www.ilp-inc.com Industrial Lighting Products 407-478-3759
F108 4.3 60WLED UNIV 5000K eg: LEDBB - CUST2700
Series Width LED Driver Color Options□ F108 Channel 4ft □ 4.3 □ 60WLED 2x56 Boards □ UNIV 120-277 Driver □ 3500K* □ STAG Staggered Configuration
□ 4.5 □ 4000K □ CHAN Channel Housing□ 5.0 □ 5000K □ FRLK Frosted Lens Kit□ CUST □ CoRDx Cord (X = ft)
□ LEDBB LED Battery Backup (may reduce max ambient)□ QDCx Quick Disconnect Cord (X = ft)□ SD480 480V Step Down Transformer□ VC V-Clips□ HB-XX-PAD Y-Toggle Cable System (XX = in)□ DIM 0-10V Dimmable Driver□ FIoS On/Off Occupancy Sensor Installed□ FIoSPC On/Off Occupancy Sensor w/ Photocell□ USDC User Selectable Dimming Control□ USBD User Select Bi-level Dim w/ Occ. Sensor □ BDxx Preset Bi-level Dim Sensor (xx=% eg. 20,30)□ BDxxPC Preset Bi-level Dim Sensor w/ Photocell□ DHPC Daylight Harvesting□ PC Photocell□ WC 11 Ga Wire Cage
Suitable aPPliCatiONS • Cove Lighting • Warehouse • Distribution Centers • Retail Applications • Manufacturing Facilities
FeatuReS
• 8 ft Configuration, Custom Lengths Available • 4.3 in. Standard Width, Custom Widths Available • Durable Aluminum Construction • Multiple Dimming and Sensor Options to Fully Control
Occupied and Unoccupied Light Levels • 5000K Color Temp (Std), Custom Color Temps
Available (e.g. 3000K, 4000K) • 5 Year Warranty • ETL Damp Listed • DesignLights Consortium® Qualified (2)
COMMERCIALlOw PROFile ChaNNel 8Ft - 60w leD
RePlaCeS 2t12, 4t8, or 250w Mh
leD SYSteMBoard (LG Chips) 4 x 28Calculated L70 (TM-21) > 100,000 hrsDelivered Lumens 6,045 lmTotal Input Watts 59.27 WLuminaire Efficacy Rating (LER) 102 lm/WCorrelated Color Temperature (CCT) 5000 KColor Rendering Index (CRI) > 80Max Ambient Temp 110˚ FUniversal Driver 120-277 V
Low Profile Channel
Channel with Housing (CHAN) Option
*Call for Availability
LED System data above based on F104-2.5-60WLED-UNIV-5000K-CHAN(1) LED Lumen Maintenance Estimates based on TM-21 projections for the light source at 25˚C ambient(2) Specific Configurations Listed on DLC.(3) DLC Qualified Products Only as Complete Luminaire.
(3)
www.ilp-inc.com Industrial Lighting Products 407-478-3759
MOUNTING OPTIONS
COMMERCIAL
lOw PROFile ChaNNel - 60w leD
Custom Stagger (STAG) OptionPlease Provide the Following Dimensions
Length = ______Width = ______Stagger = ______
L
WS
Frosted Lens Kit (FRLK) Option
Channel Housing (CHAN) Option
Low Profile LED Channel
Ballast Cover (for stand-alone fixture)
DiMeNSiONS • 4.3 in. x 48 in. x 1.250 in. - without Lens Option • 4.3 in. x 48 in. x 1.673 in. - with Lens Option • 4.3 in. x 48 in. x 1.950 in. - with CHAN Option
• V-Clips for dual point chain or cable hanging • Y-Toggle Cable Kit - Includes 2 adjustable cable hangers
HB-XX-PADV-Clips
F104-60WLED-UNIV-5000K
SUMMARY DATA
PLANE AND CONE DIAGRAM
Photometric values based upon tests performed in compliance with LM-79. IES files can be downloaded at www.ilp-inc.com
LUMINAIRE OUTPUT = 5910 LMS120.1V 0.502A 59.76W PF= 0.992
HEMISPHERES TESTED: LOWEREFFICIENCY (Total): 100.0 %EFFICIENCY (Downlight): 100.0 %SPACING CRITERION (0-Deg.): 1.29SPACING CRITERION (90-Deg.): 1.30
821.7195 :PMAL/SNEMUL 1 :SPMAL FO .ON
LUMINOUS OPENING: RECTANGULAR)teeF( 43.0 :htdiW
Length: 0.0500.0 :thgieH
8.95 :STTAW TUPNI
10 20 30 40
50
60
70
80
90
300
600
900
1200
1500
1800
Quadralaterally Symmetric Solid: 0 Degrees Small Dash: 45 Degrees Large Dash: 90 Degrees
Ordering Guide
Project Name:
Fixture tyPe:
LamPs/Board:
cataLog NumBer:
VoLts/Watts:
5 Y E A R W A R RA
NT
Y
www.ilp-inc.com Industrial Lighting Products 407-478-3759
F108 4.3 80WLED UNIV 5000K eg: LEDBB - CUST2700
Series Width LED Driver Color Options□ F108 Channel 8ft □ 4.3 □ 80WLED 2x36 Boards □ UNIV 120-277 Driver □ 3000K* □ STAG Staggered Configuration
□ 4.5 □ MAST Master (40W) □ 4000K □ CHAN Channel Housing□ 5.0 □ SLV Slave (40W) □ 5000K** □ FRLK Frosted Lens Kit□ CUST □ CoRDx Cord (X = ft)
□ LEDBB LED Battery Backup (may reduce max ambient)□ QDCx Quick Disconnect Cord (X = ft)□ SD480 480V Step Down Transformer□ VC V-Clips□ HB-XX-PAD Y-Toggle Cable System (XX = in)□ DIM 0-10V Dimmable Driver□ FIoS On/Off Occupancy Sensor Installed□ FIoSPC On/Off Occupancy Sensor w/ Photocell□ USDC User Selectable Dimming Control□ USBD User Select Bi-level Dim w/ Occ. Sensor □ BDxx Preset Bi-level Dim Sensor (xx=% eg. 20,30)□ BDxxPC Preset Bi-level Dim Sensor w/ Photocell□ DHPC Daylight Harvesting□ PC Photocell□ WC 11 Ga Wire Cage
Suitable aPPliCatiONS • Cove Lighting • Warehouse • Distribution Centers • Retail Applications • Manufacturing Facilities
FeatuReS
• 8 ft Configurations, Custom Lengths Available • 4.3 in. Standard Width, Custom Widths Available • Durable Aluminum Construction • Multiple Dimming and Sensor Options to Fully Control
Occupied and Unoccupied Light Levels • 5000K Color Temp (Std), Custom Color Temps
Available (e.g. 3000K, 4000K) • 5 Year Warranty • ETL Damp Listed • DesignLights Consortium® Qualified (2)
COMMERCIALlOw PROFile ChaNNel 8Ft - 80w leD
leD SYSteMBoard (Nichia Chips) 2 x 36Calculated L70 (TM-21) 71,000 hoursDelivered Lumens 7,297 lmTotal Input Watts 81.32 WLuminaire Efficacy Rating (LER) 89.73 lm/WCorrelated Color Temperature (CCT) 5000 KColor Rendering Index (CRI) > 80Max Ambient Temp 120˚ FUniversal Driver 120-277 V
Low Profile Channel
Channel with Housing (CHAN) Option
RePlaCeS 2t12hO, 2t5hO, or 250w Mh
*Call for Availability**DLC Listed Configuration
LED System data above based on F104-4.3-80WLED-UNIV-5000K(1) LED Lumen Maintenance Estimates based on TM-21 projections for the light source at 25˚C ambient
www.ilp-inc.com Industrial Lighting Products 407-478-3759
MOUNTING OPTIONS
COMMERCIAL
leD ChaNNel 8Ft - 80w leD F104-40WLED-UNIV
SUMMARY DATA
PLANE AND CONE DIAGRAM
Photometric values based upon tests performed in compliance with LM-79. IES files can be downloaded at www.ilp-inc.com
HEMISPHERES TESTED: BOTHEFFICIENCY (Total): 100.0 %EFFICIENCY (Downlight): 100.0 %EFFICIENCY (Uplight): 0.0 %CIE CLASSIFICATION: DIRECTSPACING CRITERION (0-Deg.): 1.30
818.5683 :PMAL/SNEMUL 1 x 36 :SPMAL FO .ON
LUMINOUS OPENING: RECTANGULAR)teeF( 83.0 :htdiW
Length: 4.0000.0 :thgieH
5.54 :STTAW TUPNI
LUMINAIRE OUTPUT = 3863 LMS120VAC, 379.49mA 45.463W, 0.9980PF
10 20 30 40
50
60
70
80
90
200
400
600
800
1000
1200
Quadralaterally Symmetric Solid: 0 Degrees Small Dash: 45 Degrees Large Dash: 90 Degrees
Frosted Lens Kit (FRLK) Option
Channel Housing (CHAN) Option
Low Profile LED Channel
Ballast Cover (for stand-alone fixture)
DiMeNSiONS • 4.3 in. x 96 in. x 1.250 in. - without Lens Option • 4.3 in. x 96 in. x 1.673 in. - with Lens Option • 4.3 in. x 96 in. x 1.950 in. - with CHAN Option
Custom Stagger (STAG) OptionPlease Provide the Following Dimensions
Length = ______Width = ______Stagger = ______
L
WS
• V-Clips for dual point chain or cable hanging • Y-Toggle Cable Kit - Includes 2 adjustable cable hangers
HB-XX-PADV-Clips
Ordering Guide
Project Name:
Fixture tyPe:
LamPs/Board:
cataLog NumBer:
VoLts/Watts:
5 Y E A R W A R RA
NT
Y
www.ilp-inc.com Industrial Lighting Products 407-478-3759
F108 4.3 100WLED UNIV 5000K eg: LEDBB - CUST2700
Series Width LED Driver Color Options□ F108 Channel 8ft □ 4.3 □ 100WLED 4x56 Boards □ UNIV 120-277 Driver □ 3500K* □ STAG Staggered Configuration
□ 4.5 □ 4000K □ CHAN Channel Housing□ 5.0 □ 5000K □ FRLK Frosted Lens Kit□ CUST □ CoRDx Cord (X = ft)
□ LEDBB LED Battery Backup (may reduce max ambient)□ QDCx Quick Disconnect Cord (X = ft)□ SD480 480V Step Down Transformer□ VC V-Clips□ HB-XX-PAD Y-Toggle Cable System (XX = in)□ DIM 0-10V Dimmable Driver□ FIoS On/Off Occupancy Sensor Installed□ FIoSPC On/Off Occupancy Sensor w/ Photocell□ USDC User Selectable Dimming Control□ USBD User Select Bi-level Dim w/ Occ. Sensor □ BDxx Preset Bi-level Dim Sensor (xx=% eg. 20,30)□ BDxxPC Preset Bi-level Dim Sensor w/ Photocell□ DHPC Daylight Harvesting□ PC Photocell□ WC 11 Ga Wire Cage
Suitable aPPliCatiONS • Cove Lighting • Warehouse • Distribution Centers • Retail Applications • Manufacturing Facilities
FeatuReS
• 8 ft Configuration, Custom Lengths Available • 4.3 in. Standard Width, Custom Widths Available • Durable Aluminum Construction • Multiple Dimming and Sensor Options to Fully Control
Occupied and Unoccupied Light Levels • 5000K Color Temp (Std), Custom Color Temps
Available (e.g. 3000K, 4000K) • 5 Year Warranty • ETL Damp Listed • DesignLights Consortium® Qualified (2)
COMMERCIALlOw PROFile ChaNNel 8Ft - 100w leD
RePlaCeS 2t12hO or 4t5hO
Low Profile Channel
Channel with Housing (CHAN) Option
leD SYSteMBoard (LG Chips) 4 x 56Calculated L70 (TM-21) > 100,000 hrsDelivered Lumens 12,354 lmTotal Input Watts 113.5 WLuminaire Efficacy Rating (LER) 109 lm/WCorrelated Color Temperature (CCT) 5000 KColor Rendering Index (CRI) > 80Max Ambient Temp 120˚ FUniversal Driver 120-277 V
*Call for Availability
LED System data above based on F108-3.125-100WLED-UNIV-5000K-CHAN(1) LED Lumen Maintenance Estimates based on TM-21 projections for the light source at 25˚C ambient(2) Specific Configurations Listed on DLC.(3) DLC Qualified Products Only as Complete Luminaire.
(3)
www.ilp-inc.com Industrial Lighting Products 407-478-3759
MOUNTING OPTIONS
COMMERCIAL
lOw PROFile ChaNNel - 100w leD
Custom Stagger (STAG) OptionPlease Provide the Following Dimensions
Length = ______Width = ______Stagger = ______
L
WS
Frosted Lens Kit (FRLK) Option
Channel Housing (CHAN) Option
Low Profile LED Channel
Ballast Cover (for stand-alone fixture)
DiMeNSiONS • 3.125 in. x 96 in. x 1.250 in. - without Lens Option • 3.125 in. x 96 in. x 1.673 in. - with Lens Option • 3.125 in. x 96 in. x 1.950 in. - with CHAN Option
• V-Clips for dual point chain or cable hanging • Y-Toggle Cable Kit - Includes 2 adjustable cable hangers
HB-XX-PADV-Clips
F108-100WLED-UNIV
SUMMARY DATA
PLANE AND CONE DIAGRAM
Photometric values based upon tests performed in compliance with LM-79. IES files can be downloaded at www.ilp-inc.com
LUMINAIRE OUTPUT = 12189 LMS120.0V 0.9367A 112.4W PF= 0.995
HEMISPHERES TESTED: LOWEREFFICIENCY (Total): 100.0 %EFFICIENCY (Downlight): 100.0 %SPACING CRITERION (0-Deg.): 1.29SPACING CRITERION (90-Deg.): 1.30
92.98121 :PMAL/SNEMUL 1 :SPMAL FO .ON
LUMINOUS OPENING: RECTANGULAR)teeF( 43.0 :htdiW
Length: 8.0000.0 :thgieH
4.211 :STTAW TUPNI
10 20 30 40
50
60
70
80
90
1000
2000
3000
4000
Quadralaterally Symmetric Solid: 0 Degrees Small Dash: 45 Degrees Large Dash: 90 Degrees
Ordering Guide
Project Name:
Fixture tyPe:
LamPs/Board:
cataLog NumBer:
VoLts/Watts:
5 Y E A R W A R RA
NT
Y
www.ilp-inc.com Industrial Lighting Products 407-478-3759
F108 4.3 160WLED UNIV 5000K eg: LEDBB - CUST2700
Series Width LED Driver Color Options � F108 Channel 8ft � 4.3 � 160WLED 4x36 Boards � UNIV 120-277 Driver � 3000K* � STAG Staggered Configuration
� 4.5 � 4000K � CHAN Channel Housing � 5.0 � 5000K � FRLK Frosted Lens Kit � CUST � CoRDx Cord (X = ft)
� LEDBB LED Battery Backup (may reduce max ambient) � QDCx Quick Disconnect Cord (X = ft) � SD480 480V Step Down Transformer � VC V-Clips � HB-XX-PAD Y-Toggle Cable System (XX = in) � DIM 0-10V Dimmable Driver � FIoS On/Off Occupancy Sensor Installed � FIoSPC On/Off Occupancy Sensor w/ Photocell � USDC User Selectable Dimming Control � USBD User Select Bi-level Dim w/ Occ. Sensor � BDxx Preset Bi-level Dim Sensor (xx=% eg. 20,30) � BDxxPC Preset Bi-level Dim Sensor w/ Photocell � DHPC Daylight Harvesting � PC Photocell � WC 11 Ga Wire Cage
Suitable aPPliCatiONS • Cove Lighting • Warehouse • Distribution Centers • Retail Applications • Manufacturing Facilities
FeatuReS • The Low Profile LED Channel Can Be Installed as a
New Fixture or as an Upgrade • 8 ft Configurations, Custom Lengths Available • 4.3 in. Standard Width, Custom Widths Available • Durable Aluminum Construction • Multiple Dimming and Sensor Options to Fully Control
Occupied and Unoccupied Light Levels • 5000K Color Temp (Std), Custom Color Temps
Available (e.g. 3000K, 4000K) • 5 Year Warranty • ETL Damp Listed
COMMERCIALlOw PROFile ChaNNel 8Ft - 160w leD
leD SYSteMBoard (Nichia Chips) 4 x 36Calculated L70 (TM-21) 71,000 hoursDelivered Lumens 14,594 lmTotal Input Watts 162.64 WLuminaire Efficacy Rating (LER) 89.73 lm/WCorrelated Color Temperature (CCT) 5000 KColor Rendering Index (CRI) > 80Max Ambient Temp 100˚ FUniversal Driver 120-277 V
*Call for Availability
Low Profile Channel
Channel with Housing (CHAN) Option
RePlaCeS 2t12hO, 4t5hO, or 6t8
LED System data above based on F104-4.3-80WLED-UNIV-5000K(1) LED Lumen Maintenance Estimates based on TM-21 projections for the light source at 25˚C ambient
www.ilp-inc.com Industrial Lighting Products 407-478-3759
MOUNTING OPTIONS
COMMERCIAL
leD ChaNNel 8Ft - 160w leD F104-80WLED-UNIV
SUMMARY DATA
PLANE AND CONE DIAGRAM
Photometric values based upon tests performed in compliance with LM-79. IES files can be downloaded at www.ilp-inc.com
LUMINAIRE OUTPUT = 7291 LMS120VAC, 681.5mA 81.32W, 0.9946PF
HEMISPHERES TESTED: BOTHEFFICIENCY (Total): 100.0 %EFFICIENCY (Downlight): 100.0 %EFFICIENCY (Uplight): 0.0 %CIE CLASSIFICATION: DIRECTSPACING CRITERION (0-Deg.): 1.30
673.4927 :PMAL/SNEMUL 1 :SPMAL FO .ON
LUMINOUS OPENING: RECTANGULAR)teeF( 83.0 :htdiW
Length: 4.0000.0 :thgieH
3.18 :STTAW TUPNI
10 20 30 40
50
60
70
80
90
350
700
1050
1400
1750
2100
Quadralaterally Symmetric Solid: 0 Degrees Small Dash: 45 Degrees Large Dash: 90 Degrees
Frosted Lens Kit (FRLK) Option
Channel Housing (CHAN) Option
Low Profile LED Channel
Ballast Cover (for stand-alone fixture)
DiMeNSiONS • 4.3 in. x 96 in. x 1.250 in. - without Lens Option • 4.3 in. x 96 in. x 1.673 in. - with Lens Option • 4.3 in. x 96 in. x 1.950 in. - with CHAN Option
Custom Stagger (STAG) OptionPlease Provide the Following Dimensions
Length = ______Width = ______Stagger = ______
L
WS
• V-Clips for dual point chain or cable hanging • Y-Toggle Cable Kit - Includes 2 adjustable cable hangers
HB-XX-PADV-Clips
www.ilp-inc.com Industrial Lighting Products 407-478-3759
ORDERING GUIDE:
Project Name:
Fixture tyPe:
LamPs/Board:
cataLog NumBer:
VoLts/Watts:
5 Y E A R W A R RA
NT
Y
FWN 40WLED UNIV 5000K eg: MCWHIP6 - WW
Series LED Driver Color Options � FWN Narrow Wrap 4ft � 40WLED 1x36 Board � UNIV 120-277 Driver � 3000K* � CORDx Cord (X = ft)
� 4000K � PLUGx Plug (X = Type, eg. L715P)
� 5000K � LEDBB LED Battery Backup (may reduce max ambient)
� MCWHIPx Flexible Conduit (X = ft)
� SD480 480V Step Down Transformer � WC Wire Cage (Replaces Prismatic Lens)
� DIM 0-10V Dimmable Driver � FIOS On/Off Occupancy Sensor Installed � USDC User Selectable Dimming Control � USBD User Select Bi-level Dim w/ Occ. Sensor � BDxx Preset Bi-level Dim Sensor (xx=% eg. 20,30)
COMMERCIAL
NARROW WRAP - 40W LED
SUITABLE APPLICATIONS • Work Station Task Lighting • Offices • Hallways • Multi Purpose
FEATURES • 4 Foot Configuration • Suitable for Continuous Runs • 23 Ga Die Formed Steel Housing • Specification Grade for New Construction • Surface Mount or Suspended • Ample KOs on Back and Ends. • Prismatic Wrap Around Lens • Wire Cage Option Available
- Replaces Prismatic Lens • Multiple Dimming and Sensor Options to Fully Control
Occupied and Unoccupied Light Levels
• 5 Year Warranty • ETL Damp Listed
LED SYSTEMBoard (Nichia Chips) 1 x 36Calculated L70 (TM-21) 72,000 hoursDelivered Lumens 3,386 lmTotal Input Watts 46.47 WLuminaire Efficacy Rating (LER) 72.86 lm/WCorrelated Color Temperature (CCT) 5000 KColor Rendering Index (CRI) > 80Max Ambient Temp 120˚ FUniversal Driver 120-277 V
*Call for Availability
REPLACES 2T12, 2T8, or 150W MH
LED System data above based on FWN-40WLED-UNIV-5000K(1) LED Lumen Maintenance Estimates based on TM-21 projections for the light source at 25˚C ambient
www.ilp-inc.com Industrial Lighting Products 407-478-3759
MOUNTING OPTIONS
SURFACE MOUNT
PENDANT MOUNT
DUAL POINT MOUNT
FWN-40WLED-UNIV
SUMMARY DATA
PLANE AND CONE DIAGRAM
Photometric values based upon tests performed in compliance with LM-79. IES files can be downloaded at www.ilp-inc.com
LUMINAIRE OUTPUT = 3382 LMS120VAC, 387.70mA 46.470W, 0.9980PF
HEMISPHERES TESTED: BOTHEFFICIENCY (Total): 100.0 %EFFICIENCY (Down / Up): 97.8 % / 2.2 %EFFICIENCY (Street / House): 52.7 % / 47.3 %ROADWAY CLASSIFICATION: TYPE VSCUTOFF CLASSIFICATION: SEMICUTOFF
934.5833 :PMAL/SNEMUL 1 :SPMAL FO .ON
LUMINOUS OPENING: RECTANGULAR)teeF( 00.4 :htdiW
Length: 0.6700.0 :thgieH
5.64 :STTAW TUPNI
10 20 30 40
50
60
70
80
90
100
110
120
130
140 150 160 170 170 160 150 140
130
120
110
100
90
80
70
60
50
40 30 20 10
1000
2000
MAX CANDLEPOWER: 1363.7 Max plane at H = 135 Max cone at V = 2.5
COMMERCIAL
NARROW WRAP - 40W
FWNNarrow Wrap
www.ilp-inc.com Industrial Lighting Products 407-478-3759
ORDERING GUIDE:
Project Name:
Fixture tyPe:
LamPs/Board:
cataLog NumBer:
VoLts/Watts:
5 Y E A R W A R RA
NT
Y
FWN 80WLED UNIV 5000K eg: MCWHIP6 - WW
Series LED Driver Color Options � FWN Narrow Wrap 4ft � 80WLED 2x36 Boards � UNIV 120-277 Driver � 3000K* � CORDx Cord (X = ft)
� 4000K � PLUGx Plug (X = Type, eg. L715P)
� 5000K � LEDBB LED Battery Backup (may reduce max ambient)
� MCWHIPx Flexible Conduit (X = ft)
� SD480 480V Step Down Transformer � WC Wire Cage (Replaces Prismatic Lens)
� DIM 0-10V Dimmable Driver � FIOS On/Off Occupancy Sensor Installed � USDC User Selectable Dimming Control � USBD User Select Bi-level Dim w/ Occ. Sensor � BDxx Preset Bi-level Dim Sensor (xx=% eg. 20,30)
COMMERCIAL
NARROW WRAP - 80W LED
SUITABLE APPLICATIONS • Work Station Task Lighting • Offices • Hallways • Multi Purpose
FEATURES • 4 Foot Configuration • Suitable for Continuous Runs • 23 Ga Die Formed Steel Housing • Specification Grade for New Construction • Surface Mount or Suspended • Ample KOs on Back and Ends. • Prismatic Wrap Around Lens • Wire Cage Option Available
- Replaces Prismatic Lens • Multiple Dimming and Sensor Options to Fully Control
Occupied and Unoccupied Light Levels
• 5 Year Warranty • ETL Damp Listed
LED SYSTEMBoard (Nichia Chips) 2 x 36Calculated L70 (TM-21) 77,000 hoursDelivered Lumens 6,046 lmTotal Input Watts 80.01 WLuminaire Efficacy Rating (LER) 75.57 lm/WCorrelated Color Temperature (CCT) 5000 KColor Rendering Index (CRI) > 80Max Ambient Temp 107˚ FUniversal Driver 120-277 V
*Call for Availability
REPLACES 2T12HO, 4T8, or 2T5HO
LED System data above based on FWN-80WLED-UNIV-5000K(1) LED Lumen Maintenance Estimates based on TM-21 projections for the light source at 25˚C ambient
www.ilp-inc.com Industrial Lighting Products 407-478-3759
MOUNTING OPTIONS
NARROW WRAP - 80WCOMMERCIAL
FWN-80WLED-UNIV
SUMMARY DATA
PLANE AND CONE DIAGRAM
Photometric values based upon tests performed in compliance with LM-79. IES files can be downloaded at www.ilp-inc.com
LUMINAIRE OUTPUT = 6041 LMS120VAC, 671.9mA 80.01W, 0.9925PF
HEMISPHERES TESTED: BOTHEFFICIENCY (Total): 100.0 %EFFICIENCY (Down / Up): 98.0 % / 2.0 %EFFICIENCY (Street / House): 57.3 % / 42.7 %ROADWAY CLASSIFICATION: TYPE II, VERY SHORTCUTOFF CLASSIFICATION: SEMICUTOFF
328.6406 :PMAL/SNEMUL 1 :SPMAL FO .ON
LUMINOUS OPENING: RECTANGULAR)teeF( 76.0 :htdiW
Length: 4.0050.0 :thgieH 08 :STTAW TUPNI
10 20 30 40
50
60
70
80
90
100
110
120
130
140 150 160 170 170 160 150 140
130
120
110
100
90
80
70
60
50
40 30 20 10
1000
2000
MAX CANDLEPOWER: 2437.8 Max plane at H = 45 Max cone at V = 5
SURFACE MOUNT
PENDANT MOUNT
DUAL POINT MOUNT
FWNNarrow Wrap
www.ilp-inc.com Industrial Lighting Products 407-478-3759
ORDERING GUIDE:
Project Name:
Fixture tyPe:
LamPs/Board:
cataLog NumBer:
VoLts/Watts:
5 Y E A R W A R RA
NT
Y
FWN8 80WLED UNIV 5000K eg: MCWHIP6 - WW
Series LED Driver Color Options � FWN8 Narrow Wrap 8ft � 80WLED 2x36 Boards � UNIV 120-277 Driver � 3000K* � CORDx Cord (X = ft)
� 4000K � PLUGx Plug (X = Type, eg. L715P)
� 5000K � LEDBB LED Battery Backup (may reduce max ambient)
� MCWHIPx Flexible Conduit (X = ft)
� SD480 480V Step Down Transformer � WC Wire Cage (Replaces Prismatic Lens)
� DIM 0-10V Dimmable Driver � FIOS On/Off Occupancy Sensor Installed � USDC User Selectable Dimming Control � USBD User Select Bi-level Dim w/ Occ. Sensor � BDxx Preset Bi-level Dim Sensor (xx=% eg. 20,30)
COMMERCIAL
NARROW WRAP 8FT - 80W LED
SUITABLE APPLICATIONS • Work Station Task Lighting • Offices • Hallways • Multi Purpose
FEATURES • 8 Foot Configuration • Suitable for Continuous Runs • 23 Ga Die Formed Steel Housing • Specification Grade for New Construction • Surface Mount or Suspended • Ample KOs on Back and Ends. • Prismatic Wrap Around Lens • Wire Cage Option Available
- Replaces Prismatic Lens • Multiple Dimming and Sensor Options to Fully Control
Occupied and Unoccupied Light Levels
• 5 Year Warranty • ETL Damp Listed
LED SYSTEMBoard (Nichia Chips) 2 x 36Calculated L70 (TM-21) 77,000 hoursDelivered Lumens 6,046 lmTotal Input Watts 80.01 WLuminaire Efficacy Rating (LER) 75.57 lm/WCorrelated Color Temperature (CCT) 5000 KColor Rendering Index (CRI) > 80Max Ambient Temp 120˚ FUniversal Driver 120-277 V
*Call for Availability
REPLACES 2T12, 4T8, or 2T5HO
LED System data above based on FWN8-80WLED-UNIV-5000K(1) LED Lumen Maintenance Estimates based on TM-21 projections for the light source at 25˚C ambient
www.ilp-inc.com Industrial Lighting Products 407-478-3759
MOUNTING OPTIONS
SURFACE MOUNT
PENDANT MOUNT
DUAL POINT MOUNT
FWN-40WLED-UNIV
SUMMARY DATA
PLANE AND CONE DIAGRAM
Photometric values based upon tests performed in compliance with LM-79. IES files can be downloaded at www.ilp-inc.com
LUMINAIRE OUTPUT = 3382 LMS120VAC, 387.70mA 46.470W, 0.9980PF
HEMISPHERES TESTED: BOTHEFFICIENCY (Total): 100.0 %EFFICIENCY (Down / Up): 97.8 % / 2.2 %EFFICIENCY (Street / House): 52.7 % / 47.3 %ROADWAY CLASSIFICATION: TYPE VSCUTOFF CLASSIFICATION: SEMICUTOFF
934.5833 :PMAL/SNEMUL 1 :SPMAL FO .ON
LUMINOUS OPENING: RECTANGULAR)teeF( 00.4 :htdiW
Length: 0.6700.0 :thgieH
5.64 :STTAW TUPNI
10 20 30 40
50
60
70
80
90
100
110
120
130
140 150 160 170 170 160 150 140
130
120
110
100
90
80
70
60
50
40 30 20 10
1000
2000
MAX CANDLEPOWER: 1363.7 Max plane at H = 135 Max cone at V = 2.5
COMMERCIAL
NARROW WRAP 8FT- 80W
FWNNarrow Wrap
www.ilp-inc.com Industrial Lighting Products 407-478-3759
ORDERING GUIDE:
Project Name:
Fixture tyPe:
LamPs/Board:
cataLog NumBer:
VoLts/Watts:
5 Y E A R W A R RA
NT
Y
FWN8 160WLED UNIV 5000K eg: MCWHIP6 - WW
Series LED Driver Color Options � FWN8 Narrow Wrap 8ft � 160WLED 4x36 Boards � UNIV 120-277 Driver � 3000K* � CORDx Cord (X = ft)
� 4000K � PLUGx Plug (X = Type, eg. L715P)
� 5000K � LEDBB LED Battery Backup (may reduce max ambient)
� MCWHIPx Flexible Conduit (X = ft)
� SD480 480V Step Down Transformer � WC Wire Cage (Replaces Prismatic Lens)
� DIM 0-10V Dimmable Driver � FIOS On/Off Occupancy Sensor Installed � USDC User Selectable Dimming Control � USBD User Select Bi-level Dim w/ Occ. Sensor � BDxx Preset Bi-level Dim Sensor (xx=% eg. 20,30)
COMMERCIAL
NARROW WRAP 8FT - 160W LED
SUITABLE APPLICATIONS • Work Station Task Lighting • Offices • Hallways • Multi Purpose
FEATURES • 8 Foot Configuration • Suitable for Continuous Runs • 23 Ga Die Formed Steel Housing • Specification Grade for New Construction • Surface Mount or Suspended • Ample KOs on Back and Ends. • Prismatic Wrap Around Lens • Wire Cage Option Available
- Replaces Prismatic Lens • Multiple Dimming and Sensor Options to Fully Control
Occupied and Unoccupied Light Levels
• 5 Year Warranty • ETL Damp Listed
LED SYSTEMBoard (Nichia Chips) 4 x 36Calculated L70 (TM-21) 77,000 hoursDelivered Lumens 12,092 lmTotal Input Watts 160.02 WLuminaire Efficacy Rating (LER) 75.57 lm/WCorrelated Color Temperature (CCT) 5000 KColor Rendering Index (CRI) > 80Max Ambient Temp 107˚ FUniversal Driver 120-277 V
*Call for Availability
REPLACES 2T12HO, 4T5HO, or 6T8
LED System data above based on FWN8-160WLED-UNIV-5000K(1) LED Lumen Maintenance Estimates based on TM-21 projections for the light source at 25˚C ambient
www.ilp-inc.com Industrial Lighting Products 407-478-3759
MOUNTING OPTIONS
NARROW WRAP 8FT - 160WCOMMERCIAL
FWN-80WLED-UNIV
SUMMARY DATA
PLANE AND CONE DIAGRAM
Photometric values based upon tests performed in compliance with LM-79. IES files can be downloaded at www.ilp-inc.com
LUMINAIRE OUTPUT = 6041 LMS120VAC, 671.9mA 80.01W, 0.9925PF
HEMISPHERES TESTED: BOTHEFFICIENCY (Total): 100.0 %EFFICIENCY (Down / Up): 98.0 % / 2.0 %EFFICIENCY (Street / House): 57.3 % / 42.7 %ROADWAY CLASSIFICATION: TYPE II, VERY SHORTCUTOFF CLASSIFICATION: SEMICUTOFF
328.6406 :PMAL/SNEMUL 1 :SPMAL FO .ON
LUMINOUS OPENING: RECTANGULAR)teeF( 76.0 :htdiW
Length: 4.0050.0 :thgieH 08 :STTAW TUPNI
10 20 30 40
50
60
70
80
90
100
110
120
130
140 150 160 170 170 160 150 140
130
120
110
100
90
80
70
60
50
40 30 20 10
1000
2000
MAX CANDLEPOWER: 2437.8 Max plane at H = 45 Max cone at V = 5
FWNNarrow Wrap
SURFACE MOUNT
PENDANT MOUNT
DUAL POINT MOUNT
www.ilp-inc.com Industrial Lighting Products 407-478-3759
ORDERING GUIDE:
Project Name:
Fixture tyPe:
LamPs/Board:
cataLog NumBer:
VoLts/Watts:
5 Y E A R W A R RA
NT
Y
FWC 40WLED UNIV 5000K eg: MCWHIP6 - WW
Series LED Driver Color Options � FWC Conversion Wrap 4ft � 40WLED 1x36 Boards � UNIV 120-277 Driver � 3000K* � CORDx Cord (X = ft)
� 4000K � PLUGx Plug (X = Type, eg. L715P)
� 5000K � LEDBB LED Battery Backup (may reduce max ambient)
� MCWHIPx Flexible Conduit (X = ft)
� SD480 480V Step Down Transformer � WC Wire Cage (Replaces Prismatic Lens)
� DIM 0-10V Dimmable Driver � FIOS On/Off Occupancy Sensor Installed � USDC User Selectable Dimming Control � USBD User Select Bi-level Dim w/ Occ. Sensor � BDxx Preset Bi-level Dim Sensor (xx=% eg. 20,30)
COMMERCIAL
CONVERSION WRAP - 40W LED
SUITABLE APPLICATIONS • Work Station Task Lighting • Offices • Hallways • Multi Purpose
FEATURES • 4 Foot Configuration • Suitable for Continuous Runs • 23 Ga Die Formed Steel Housing • Specification Grade for New Construction • Surface Mount or Suspended • Ample KOs on Back and Ends. • Prismatic Wrap Around Lens • Wire Cage Option Available
- Replaces Prismatic Lens • Multiple Dimming and Sensor Options to Fully Control
Occupied and Unoccupied Light Levels
• 5 Year Warranty • ETL Damp Listed
LED SYSTEMBoard (Nichia Chips) 1 x 36Calculated L70 (TM-21) 72,000 hoursDelivered Lumens 3,386 lmTotal Input Watts 46.47 WLuminaire Efficacy Rating (LER) 72.86 lm/WCorrelated Color Temperature (CCT) 5000 KColor Rendering Index (CRI) > 80Max Ambient Temp 120˚ FUniversal Driver 120-277 V
*Call for Availability
REPLACES 2T12, 2T8, or 150W MH
LED System data above based on FWC-40WLED-UNIV-5000K(1) LED Lumen Maintenance Estimates based on TM-21 projections for the light source at 25˚C ambient
www.ilp-inc.com Industrial Lighting Products 407-478-3759
MOUNTING OPTIONS
FWC-40WLED-UNIV
SUMMARY DATA
PLANE AND CONE DIAGRAM
Photometric values based upon tests performed in compliance with LM-79. IES files can be downloaded at www.ilp-inc.com
LUMINAIRE OUTPUT = 3382 LMS120VAC, 387.70mA 46.470W, 0.9980PF
HEMISPHERES TESTED: BOTHEFFICIENCY (Total): 100.0 %EFFICIENCY (Down / Up): 97.8 % / 2.2 %EFFICIENCY (Street / House): 52.7 % / 47.3 %ROADWAY CLASSIFICATION: TYPE VSCUTOFF CLASSIFICATION: SEMICUTOFF
934.5833 :PMAL/SNEMUL 1 :SPMAL FO .ON
LUMINOUS OPENING: RECTANGULAR)teeF( 00.4 :htdiW
Length: 0.6700.0 :thgieH
5.64 :STTAW TUPNI
10 20 30 40
50
60
70
80
90
100
110
120
130
140 150 160 170 170 160 150 140
130
120
110
100
90
80
70
60
50
40 30 20 10
1000
2000
MAX CANDLEPOWER: 1363.7 Max plane at H = 135 Max cone at V = 2.5
COMMERCIAL
CONVERSION WRAP - 40W
6.989
13.393
3.943 FWCConversion Wrap
SURFACE MOUNT
www.ilp-inc.com Industrial Lighting Products 407-478-3759
ORDERING GUIDE:
Project Name:
Fixture tyPe:
LamPs/Board:
cataLog NumBer:
VoLts/Watts:
5 Y E A R W A R RA
NT
Y
FWC 80WLED UNIV 5000K eg: MCWHIP6 - WW
Series LED Driver Color Options � FWC Conversion Wrap 4ft � 80WLED 2x36 Boards � UNIV 120-277 Driver � 3000K* � CORDx Cord (X = ft)
� 4000K � PLUGx Plug (X = Type, eg. L715P)
� 5000K � LEDBB LED Battery Backup (may reduce max ambient)
� MCWHIPx Flexible Conduit (X = ft)
� SD480 480V Step Down Transformer � WC Wire Cage (Replaces Prismatic Lens)
� DIM 0-10V Dimmable Driver � FIOS On/Off Occupancy Sensor Installed � USDC User Selectable Dimming Control � USBD User Select Bi-level Dim w/ Occ. Sensor � BDxx Preset Bi-level Dim Sensor (xx=% eg. 20,30)
COMMERCIAL
CONVERSION WRAP - 80W LED
SUITABLE APPLICATIONS • Work Station Task Lighting • Offices • Hallways • Multi Purpose
FEATURES • 4 Foot Configuration • Suitable for Continuous Runs • 23 Ga Die Formed Steel Housing • Specification Grade for New Construction • Surface Mount or Suspended • Ample KOs on Back and Ends. • Prismatic Wrap Around Lens • Wire Cage Option Available
- Replaces Prismatic Lens • Multiple Dimming and Sensor Options to Fully Control
Occupied and Unoccupied Light Levels
• 5 Year Warranty • ETL Damp Listed
LED SYSTEMBoard (Nichia Chips) 2 x 36Calculated L70 (TM-21) 77,000 hoursDelivered Lumens 6,046 lmTotal Input Watts 80.01 WLuminaire Efficacy Rating (LER) 75.57 lm/WCorrelated Color Temperature (CCT) 5000 KColor Rendering Index (CRI) > 80Max Ambient Temp 107˚ FUniversal Driver 120-277 V
*Call for Availability
REPLACES 2T12HO, 4T8, or 2T5HO
LED System data above based on FWC-80WLED-UNIV-5000K(1) LED Lumen Maintenance Estimates based on TM-21 projections for the light source at 25˚C ambient
www.ilp-inc.com Industrial Lighting Products 407-478-3759
MOUNTING OPTIONS
CONVERSION WRAP - 80WCOMMERCIAL
FWC-80WLED-UNIV
SUMMARY DATA
PLANE AND CONE DIAGRAM
Photometric values based upon tests performed in compliance with LM-79. IES files can be downloaded at www.ilp-inc.com
LUMINAIRE OUTPUT = 6041 LMS120VAC, 671.9mA 80.01W, 0.9925PF
HEMISPHERES TESTED: BOTHEFFICIENCY (Total): 100.0 %EFFICIENCY (Down / Up): 98.0 % / 2.0 %EFFICIENCY (Street / House): 57.3 % / 42.7 %ROADWAY CLASSIFICATION: TYPE II, VERY SHORTCUTOFF CLASSIFICATION: SEMICUTOFF
328.6406 :PMAL/SNEMUL 1 :SPMAL FO .ON
LUMINOUS OPENING: RECTANGULAR)teeF( 76.0 :htdiW
Length: 4.0050.0 :thgieH 08 :STTAW TUPNI
10 20 30 40
50
60
70
80
90
100
110
120
130
140 150 160 170 170 160 150 140
130
120
110
100
90
80
70
60
50
40 30 20 10
1000
2000
MAX CANDLEPOWER: 2437.8 Max plane at H = 45 Max cone at V = 5
6.989
13.393
3.943 FWCConversion Wrap
SURFACE MOUNT
www.ilp-inc.com Industrial Lighting Products 407-478-3759
ORDERING GUIDE:
Project Name:
Fixture tyPe:
LamPs/Board:
cataLog NumBer:
VoLts/Watts:
5 Y E A R W A R RA
NT
Y
FWC8 80WLED UNIV 5000K eg: MCWHIP6 - WW
Series LED Driver Color Options � FWC8 Conversion Wrap 8ft � 80WLED 2x36 Boards � UNIV 120-277 Driver � 3000K* � CORDx Cord (X = ft)
� 4000K � PLUGx Plug (X = Type, eg. L715P)
� 5000K � LEDBB LED Battery Backup (may reduce max ambient)
� MCWHIPx Flexible Conduit (X = ft)
� SD480 480V Step Down Transformer � WC Wire Cage (Replaces Prismatic Lens)
� DIM 0-10V Dimmable Driver � FIOS On/Off Occupancy Sensor Installed � USDC User Selectable Dimming Control � USBD User Select Bi-level Dim w/ Occ. Sensor � BDxx Preset Bi-level Dim Sensor (xx=% eg. 20,30)
COMMERCIAL
CONVERSION WRAP 8FT - 80W LED
SUITABLE APPLICATIONS • Work Station Task Lighting • Offices • Hallways • Multi Purpose
FEATURES • 8 Foot Configuration • Suitable for Continuous Runs • 23 Ga Die Formed Steel Housing • Specification Grade for New Construction • Surface Mount or Suspended • Ample KOs on Back and Ends. • Prismatic Wrap Around Lens • Wire Cage Option Available
- Replaces Prismatic Lens • Multiple Dimming and Sensor Options to Fully Control
Occupied and Unoccupied Light Levels
• 5 Year Warranty • ETL Damp Listed
LED SYSTEMBoard (Nichia Chips) 2 x 36Calculated L70 (TM-21) 77,000 hoursDelivered Lumens 6,046 lmTotal Input Watts 80.01 WLuminaire Efficacy Rating (LER) 75.57 lm/WCorrelated Color Temperature (CCT) 5000 KColor Rendering Index (CRI) > 80Max Ambient Temp 120˚ FUniversal Driver 120-277 V
*Call for Availability
REPLACES 2T12, 4T8, or 2T5HO
LED System data above based on FWC8-80WLED-UNIV-5000K(1) LED Lumen Maintenance Estimates based on TM-21 projections for the light source at 25˚C ambient
www.ilp-inc.com Industrial Lighting Products 407-478-3759
MOUNTING OPTIONS
FWC-40WLED-UNIV
SUMMARY DATA
PLANE AND CONE DIAGRAM
Photometric values based upon tests performed in compliance with LM-79. IES files can be downloaded at www.ilp-inc.com
LUMINAIRE OUTPUT = 3382 LMS120VAC, 387.70mA 46.470W, 0.9980PF
HEMISPHERES TESTED: BOTHEFFICIENCY (Total): 100.0 %EFFICIENCY (Down / Up): 97.8 % / 2.2 %EFFICIENCY (Street / House): 52.7 % / 47.3 %ROADWAY CLASSIFICATION: TYPE VSCUTOFF CLASSIFICATION: SEMICUTOFF
934.5833 :PMAL/SNEMUL 1 :SPMAL FO .ON
LUMINOUS OPENING: RECTANGULAR)teeF( 00.4 :htdiW
Length: 0.6700.0 :thgieH
5.64 :STTAW TUPNI
10 20 30 40
50
60
70
80
90
100
110
120
130
140 150 160 170 170 160 150 140
130
120
110
100
90
80
70
60
50
40 30 20 10
1000
2000
MAX CANDLEPOWER: 1363.7 Max plane at H = 135 Max cone at V = 2.5
COMMERCIAL
CONVERSION WRAP 8FT - 80W
6.989
13.393
3.943 FWCConversion Wrap
SURFACE MOUNT
www.ilp-inc.com Industrial Lighting Products 407-478-3759
ORDERING GUIDE:
Project Name:
Fixture tyPe:
LamPs/Board:
cataLog NumBer:
VoLts/Watts:
5 Y E A R W A R RA
NT
Y
FWC8 160WLED UNIV 5000K eg: MCWHIP6 - WW
Series LED Driver Color Options � FWC8 Conversion Wrap 8ft � 160WLED 4x36 Boards � UNIV 120-277 Driver � 3000K* � CORDx Cord (X = ft)
� 4000K � PLUGx Plug (X = Type, eg. L715P)
� 5000K � LEDBB LED Battery Backup (may reduce max ambient)
� MCWHIPx Flexible Conduit (X = ft)
� SD480 480V Step Down Transformer � WC Wire Cage (Replaces Prismatic Lens)
� DIM 0-10V Dimmable Driver � FIOS On/Off Occupancy Sensor Installed � USDC User Selectable Dimming Control � USBD User Select Bi-level Dim w/ Occ. Sensor � BDxx Preset Bi-level Dim Sensor (xx=% eg. 20,30)
COMMERCIAL
CONVERSION WRAP 8FT - 160W LED
SUITABLE APPLICATIONS • Work Station Task Lighting • Offices • Hallways • Multi Purpose
FEATURES • 8 Foot Configuration • Suitable for Continuous Runs • 23 Ga Die Formed Steel Housing • Specification Grade for New Construction • Surface Mount or Suspended • Ample KOs on Back and Ends. • Prismatic Wrap Around Lens • Wire Cage Option Available
- Replaces Prismatic Lens • Multiple Dimming and Sensor Options to Fully Control
Occupied and Unoccupied Light Levels
• 5 Year Warranty • ETL Damp Listed
LED SYSTEMBoard (Nichia Chips) 4 x 36Calculated L70 (TM-21) 77,000 hoursDelivered Lumens 12,092 lmTotal Input Watts 160.02 WLuminaire Efficacy Rating (LER) 75.57 lm/WCorrelated Color Temperature (CCT) 5000 KColor Rendering Index (CRI) > 80Max Ambient Temp 107˚ FUniversal Driver 120-277 V
*Call for Availability
REPLACES 2T12HO, 4T5HO, or 6T8
LED System data above based on FWC8-160WLED-UNIV-5000K(1) LED Lumen Maintenance Estimates based on TM-21 projections for the light source at 25˚C ambient
www.ilp-inc.com Industrial Lighting Products 407-478-3759
MOUNTING OPTIONS
CONVERSION WRAP 8FT - 160WCOMMERCIAL
FWC-80WLED-UNIV
SUMMARY DATA
PLANE AND CONE DIAGRAM
Photometric values based upon tests performed in compliance with LM-79. IES files can be downloaded at www.ilp-inc.com
LUMINAIRE OUTPUT = 6041 LMS120VAC, 671.9mA 80.01W, 0.9925PF
HEMISPHERES TESTED: BOTHEFFICIENCY (Total): 100.0 %EFFICIENCY (Down / Up): 98.0 % / 2.0 %EFFICIENCY (Street / House): 57.3 % / 42.7 %ROADWAY CLASSIFICATION: TYPE II, VERY SHORTCUTOFF CLASSIFICATION: SEMICUTOFF
328.6406 :PMAL/SNEMUL 1 :SPMAL FO .ON
LUMINOUS OPENING: RECTANGULAR)teeF( 76.0 :htdiW
Length: 4.0050.0 :thgieH 08 :STTAW TUPNI
10 20 30 40
50
60
70
80
90
100
110
120
130
140 150 160 170 170 160 150 140
130
120
110
100
90
80
70
60
50
40 30 20 10
1000
2000
MAX CANDLEPOWER: 2437.8 Max plane at H = 45 Max cone at V = 5
6.989
13.393
3.943 FWCConversion Wrap
SURFACE MOUNT
www.ilp-inc.com Industrial Lighting Products 407-478-3759
Project Name:
Fixture tyPe:
LamPs/Board:
cataLog NumBer:
VoLts/Watts:
5 Y E A R W A R RA
NT
Y
ORDERING GUIDE:
Part Number Full Description � DLR4-9WLED-1DIM-2700K 4” LED Down Light Retrofit - 9W, 120V Dimmable, 2700K Color Temp
DIMMABLE RETROFIT
4” DOWN LIGHT - 9W - 2700K LED
FEATURES • Aluminum Alloy Body with Built-in Trim Ring • Easy Installation into Standard 4” Downlight Can • Fully Dimmable, Instant-on Light with High Lumen Output • Built-in Frosted Lens • 2700K Color Temperature • Safe and Cool to Touch • Mercury Free • Energy Star Certified • 5 Year Warranty • IP60 Rated for Indoor Use • IC Rated • RoHS Compliant • UL Listed for Dry & Damp Locations
LED SYSTEMCalculated L70 (TM-21) 35,000 hoursDelivered Lumens 660 lmTotal Input Watts 9 WLuminaire Efficacy Rating (LER) 73 lm/WCorrelated Color Temperature (CCT) 2700 KColor Rendering Index (CRI) 83Max Ambient Temp 104˚ F120V Dimmable Driver 120 V
complies with
RoHS
REPLACES 65W
SUITABLE APPLICATIONS • Homes • Offices • Shopping Malls
LED System data above based on DLR4-9WLED-1DIM-2700K(1) LED Lumen Maintenance Estimates based on TM-21 projections for the light source at 25˚C ambient
www.ilp-inc.com Industrial Lighting Products 407-478-3759
EASY INSTALLATION
DIMMABLE RETROFIT
4” DOWN LIGHT - 9W LED DLR4-9WLED-2700K
SUMMARY DATA
PLANE AND CONE DIAGRAM
Photometric values based upon tests performed in compliance with LM-79. IES files can be downloaded at www.ilp-inc.com
Total Lamp Lumens 610.37
Luminaire Lumens 610
Total Luminaire Efficiency 100 %Luminaire Efficacy Rating (LER) 72
Total Luminaire Watts 8.46
Ballast Factor 1.00CIE Type DirectSpacing Criterion (0-180) 1.16Spacing Criterion (90-270) 1.16Spacing Criterion (Diagonal) 1.24Basic Luminous Shape Circular
70
140
210
280
1
2
Maximum Candela = 280.219 Located At Horizontal Angle = 0, Vertical Angle = 0# 1 - Vertical Plane Through Horizontal Angles (0 - 180) (Through Max. Cd.)# 2 - Horizontal Cone Through Vertical Angle (0) (Through Max. Cd.)
Step 1
Twist Adapter into Socket
Step 2
Insert Male Connector into Female Connector
Step 3
Insert LED into Can Housing (Recessed Can Housing Not Included)
www.ilp-inc.com Industrial Lighting Products 407-478-3759
Project Name:
Fixture tyPe:
LamPs/Board:
cataLog NumBer:
VoLts/Watts:
5 Y E A R W A R RA
NT
Y
DIMMABLE RETROFIT
6” DOWN LIGHT - 10W - 2700K LED
FEATURES • Aluminum Alloy Body with Built-in Trim Ring • Easy Installation into Standard 6” Downlight Can • Fully Dimmable, Instant-on Light with High Lumen Output • Built-in Frosted Lens • 2700K Color Temperature • Safe and Cool to Touch • Mercury Free • Energy Star Certified • 5 Year Warranty • IP60 Rated for Indoor Use • IC Rated • RoHS Compliant • UL Listed for Dry & Damp Locations
LED SYSTEMCalculated L70 (TM-21) 35,000 hoursDelivered Lumens 740 lmTotal Input Watts 10 WLuminaire Efficacy Rating (LER) 74 lm/WCorrelated Color Temperature (CCT) 2700 KColor Rendering Index (CRI) 84Max Ambient Temp 104˚ F120V Dimmable Driver 120V
ORDERING GUIDE:
complies with
RoHS
REPLACES 60W-75W
SUITABLE APPLICATIONS • Homes • Offices • Shopping Malls
Part Number Full Description Options � DLR6-10WLED-1DIM-2700K 6” LED Down Light Retrofit - 10W, 120V Dimmable, 2700K Color Temp � TBA Trim Bracket Adapter
LED System data above based on DLR6-10WLED-1DIM-2700K(1) LED Lumen Maintenance Estimates based on TM-21 projections for the light source at 25˚C ambient
www.ilp-inc.com Industrial Lighting Products 407-478-3759
EASY INSTALLATION
6” DOWN LIGHT - 10W LEDDIMMABLE RETROFIT
Step 1
Twist Adapter into Socket
Step 2
Insert Male Connector into Female Connector
Step 3
Insert LED into Can Housing (Recessed Can Housing Not Included)
7.32”
5.21”
2.83
”
DLR6-10WLED-1-DIM-2700K
SUMMARY DATA
PLANE AND CONE DIAGRAM
Photometric values based upon tests performed in compliance with LM-79. IES files can be downloaded at www.ilp-inc.com
Total Lamp Lumens 789.24
Luminaire Lumens 789
Total Luminaire Efficiency 97.5 %Luminaire Efficacy Rating (LER) 83
Total Luminaire Watts 9.56
Ballast Factor 1.00CIE Type DirectSpacing Criterion (0-180) 1.17Spacing Criterion (90-270) 1.18Spacing Criterion (Diagonal) 1.00Basic Luminous Shape Circular
10 20 30 40 50
60
70
80
90
100
200
300
Quadralaterally Symmetric Solid: 0 Degrees Small Dash: 45 Degrees Large Dash: 90 Degrees
INSTALLATION INSTRUCTIONS
Trim Bracket Adapter
ScrewsHooks
Prior to installing the fixture, disconnect ALL power supplies to the unit. This unit may be installed in TYPE IC installations.
Trim Bracket Adapter (TBA)Installation Instructions
If you are retrofitting an existing can, you may require this Trim Bracket Adapter option.
1. Remove the (3) screws around the perimeter of your existing can and keep them.
2. Insert the TBA into the can. Note the hooks face upward.
3. Align the slots with the threaded holes.
4. Make sure the bottom of the TBA is flush with the can.
5. Re-install the (3) screws through the TBA and back into the can.
Si estas readaptando una carcasa, puede que requieras de la opción TBA.
1. Remover los (3) tornillos al rededor del perímetro de tu carcasa existente y retenerlos.2. Insertar el TBA en la carcasa. Notar que los ganchos miren para arriba.3. Alineé las ranuras del TBA con los agujeros enroscados.4. Alinear la parte de abajo del TBA al rasgo de la carcasa.5. Atornillar los (3) tornillos por el TBA y de regreso a la carcasa.
519 Codisco Way • Sanford, FL 32771 • Ph: (407) 478-3759 • Fax: (407) 478-3760www.ilp-inc.com
www.ilp-inc.com Industrial Lighting Products 407-478-3759
Project Name:
Fixture tyPe:
LamPs/Board:
cataLog NumBer:
VoLts/Watts:
5 Y E A R W A R RA
NT
Y
DIMMABLE RETROFIT
6” DOWN LIGHT - 10W - 4000K LED
FEATURES • Aluminum Alloy Body with Built-in Trim Ring • Easy Installation into Standard 6” Downlight Can • Fully Dimmable, Instant-on Light with High Lumen Output • Built-in Frosted Lens • 4000K Color Temperature • Safe and Cool to Touch • Mercury Free • Energy Star Certified • 5 Year Warranty • IP60 Rated for Indoor Use • IC Rated • RoHS Compliant • UL Listed for Dry & Damp Locations
LED SYSTEMCalculated L70 (TM-21) 35,000 hoursDelivered Lumens 830 lmTotal Input Watts 10 WLuminaire Efficacy Rating (LER) 83 lm/WCorrelated Color Temperature (CCT) 4000 KColor Rendering Index (CRI) 83Max Ambient Temp 104˚ F120V Dimmable Driver 120V
ORDERING GUIDE:
complies with
RoHS
REPLACES 60W-75W
SUITABLE APPLICATIONS • Homes • Offices • Shopping Malls
Part Number Full Description Options � DLR6-10WLED-1DIM-4000K 6” LED Down Light Retrofit - 10W, 120V Dimmable, 4000K Color Temp � TBA Trim Bracket Adapter
LED System data above based on DLR6-10WLED-1DIM-4000K(1) LED Lumen Maintenance Estimates based on TM-21 projections for the light source at 25˚C ambient
www.ilp-inc.com Industrial Lighting Products 407-478-3759
EASY INSTALLATION
6” DOWN LIGHT - 10W LEDDIMMABLE RETROFIT
Step 1
Twist Adapter into Socket
Step 2
Insert Male Connector into Female Connector
Step 3
Insert LED into Can Housing (Recessed Can Housing Not Included)
7.32”
5.21”
2.83
”
DLR6-10WLED-1-DIM-4000K
SUMMARY DATA
PLANE AND CONE DIAGRAM
Photometric values based upon tests performed in compliance with LM-79. IES files can be downloaded at www.ilp-inc.com
f
Total Lamp Lumens 790.9
Luminaire Lumens 791
Total Luminaire Efficiency 99.8 %Luminaire Efficacy Rating (LER) 83
Total Luminaire Watts 9.56
Ballast Factor 1.00CIE Type DirectSpacing Criterion (0-180) 1.00Spacing Criterion (90-270) 1.00Spacing Criterion (Diagonal) 1.00Basic Luminous Shape Circular
INSTALLATION INSTRUCTIONS
Trim Bracket Adapter
ScrewsHooks
Prior to installing the fixture, disconnect ALL power supplies to the unit. This unit may be installed in TYPE IC installations.
Trim Bracket Adapter (TBA)Installation Instructions
If you are retrofitting an existing can, you may require this Trim Bracket Adapter option.
1. Remove the (3) screws around the perimeter of your existing can and keep them.
2. Insert the TBA into the can. Note the hooks face upward.
3. Align the slots with the threaded holes.
4. Make sure the bottom of the TBA is flush with the can.
5. Re-install the (3) screws through the TBA and back into the can.
Si estas readaptando una carcasa, puede que requieras de la opción TBA.
1. Remover los (3) tornillos al rededor del perímetro de tu carcasa existente y retenerlos.2. Insertar el TBA en la carcasa. Notar que los ganchos miren para arriba.3. Alineé las ranuras del TBA con los agujeros enroscados.4. Alinear la parte de abajo del TBA al rasgo de la carcasa.5. Atornillar los (3) tornillos por el TBA y de regreso a la carcasa.
519 Codisco Way • Sanford, FL 32771 • Ph: (407) 478-3759 • Fax: (407) 478-3760www.ilp-inc.com
www.ilp-inc.com Industrial Lighting Products 407-478-3759
Project Name:
Fixture tyPe:
LamPs/Board:
cataLog NumBer:
VoLts/Watts:
5 Y E A R W A R RA
NT
Y
DIMMABLE RETROFIT
6” DOWN LIGHT - 15W - 2700K LED
FEATURES • Aluminum Alloy Body with Built-in Trim Ring • Easy Installation into Standard 6” Downlight Can • Fully Dimmable, Instant-on Light with High Lumen Output • Built-in Frosted Lens • 2700K Color Temperature • Safe and Cool to Touch • Mercury Free • Energy Star Certified • 5 Year Warranty • IP60 Rated for Indoor Use • IC Rated • RoHS Compliant • UL Listed for Dry & Damp Locations
LED SYSTEMCalculated L70 (TM-21) 35,000 hoursDelivered Lumens 1,100 lmTotal Input Watts 15 WLuminaire Efficacy Rating (LER) 73 lm/WCorrelated Color Temperature (CCT) 2700 KColor Rendering Index (CRI) 83Max Ambient Temp 104˚ F120V Dimmable Driver 120V
ORDERING GUIDE:
complies with
RoHS
REPLACES 75W-100W
SUITABLE APPLICATIONS • Homes • Offices • Shopping Malls
Part Number Full Description Options � DLR6-15WLED-1DIM-2700K 6” LED Down Light Retrofit - 15W, 120V Dimmable, 2700K Color Temp � TBA Trim Bracket Adapter
LED System data above based on DLR6-15WLED-1DIM-2700K(1) LED Lumen Maintenance Estimates based on TM-21 projections for the light source at 25˚C ambient
www.ilp-inc.com Industrial Lighting Products 407-478-3759
EASY INSTALLATION
6” DOWN LIGHT - 15W LEDDIMMABLE RETROFIT
DLR6-15WLED-2700K
SUMMARY DATA
PLANE AND CONE DIAGRAM
Photometric values based upon tests performed in compliance with LM-79. IES files can be downloaded at www.ilp-inc.com
Total Lamp Lumens 981.74
Luminaire Lumens 982
Total Luminaire Efficiency 100 %Luminaire Efficacy Rating (LER) 73
Total Luminaire Watts 13.42
Ballast Factor 1.00CIE Type DirectSpacing Criterion (0-180) 1.00Spacing Criterion (90-270) 1.00Spacing Criterion (Diagonal) 1.08Basic Luminous Shape Circular
158
317
475
633
1
2
Maximum Candela = 633.244 Located At Horizontal Angle = 0, Vertical Angle = 0# 1 - Vertical Plane Through Horizontal Angles (0 - 180) (Through Max. Cd.)# 2 - Horizontal Cone Through Vertical Angle (0) (Through Max. Cd.)
Step 1
Twist Adapter into Socket
Step 2
Insert Male Connector into Female Connector
Step 3
Insert LED into Can Housing (Recessed Can Housing Not Included)
INSTALLATION INSTRUCTIONS
Trim Bracket Adapter
ScrewsHooks
Prior to installing the fixture, disconnect ALL power supplies to the unit. This unit may be installed in TYPE IC installations.
Trim Bracket Adapter (TBA)Installation Instructions
If you are retrofitting an existing can, you may require this Trim Bracket Adapter option.
1. Remove the (3) screws around the perimeter of your existing can and keep them.
2. Insert the TBA into the can. Note the hooks face upward.
3. Align the slots with the threaded holes.
4. Make sure the bottom of the TBA is flush with the can.
5. Re-install the (3) screws through the TBA and back into the can.
Si estas readaptando una carcasa, puede que requieras de la opción TBA.
1. Remover los (3) tornillos al rededor del perímetro de tu carcasa existente y retenerlos.2. Insertar el TBA en la carcasa. Notar que los ganchos miren para arriba.3. Alineé las ranuras del TBA con los agujeros enroscados.4. Alinear la parte de abajo del TBA al rasgo de la carcasa.5. Atornillar los (3) tornillos por el TBA y de regreso a la carcasa.
519 Codisco Way • Sanford, FL 32771 • Ph: (407) 478-3759 • Fax: (407) 478-3760www.ilp-inc.com
www.ilp-inc.com Industrial Lighting Products 407-478-3759
Project Name:
Fixture tyPe:
LamPs/Board:
cataLog NumBer:
VoLts/Watts:
5 Y E A R W A R RA
NT
Y
DIMMABLE RETROFIT
6” DOWN LIGHT - 15W - 4000K LED
FEATURES • Aluminum Alloy Body with Built-in Trim Ring • Easy Installation into Standard 6” Downlight Can • Fully Dimmable, Instant-on Light with High Lumen Output • Built-in Frosted Lens • 4000K Color Temperature • Safe and Cool to Touch • Mercury Free • Energy Star Certified • 5 Year Warranty • IP60 Rated for Indoor Use • IC Rated • RoHS Compliant • UL Listed for Dry & Damp Locations
LED SYSTEMCalculated L70 (TM-21) 35,000 hoursDelivered Lumens 1,150 lmTotal Input Watts 15 WLuminaire Efficacy Rating (LER) 76 lm/WCorrelated Color Temperature (CCT) 4000 KColor Rendering Index (CRI) 85Max Ambient Temp 104˚ F120V Dimmable Driver 120V
ORDERING GUIDE:
complies with
RoHS
REPLACES 75W-100W
SUITABLE APPLICATIONS • Homes • Offices • Shopping Malls
Part Number Full Description Options � DLR6-15WLED-1DIM-4000K 6” LED Down Light Retrofit - 15W, 120V Dimmable, 4000K Color Temp � TBA Trim Bracket Adapter
LED System data above based on DLR6-15WLED-1DIM-4000K(1) LED Lumen Maintenance Estimates based on TM-21 projections for the light source at 25˚C ambient
www.ilp-inc.com Industrial Lighting Products 407-478-3759
EASY INSTALLATION
6” DOWN LIGHT - 15W LEDDIMMABLE RETROFIT
DLR6-15WLED-4000K
SUMMARY DATA
PLANE AND CONE DIAGRAM
Photometric values based upon tests performed in compliance with LM-79. IES files can be downloaded at www.ilp-inc.com
Total Lamp Lumens 1153.7
Luminaire Lumens 1154
Total Luminaire Efficiency 100 %Luminaire Efficacy Rating (LER) 81
Total Luminaire Watts 14.3
Ballast Factor 1.00CIE Type DirectSpacing Criterion (0-180) 0.94Spacing Criterion (90-270) 0.96Spacing Criterion (Diagonal) 1.06Basic Luminous Shape Point
200
401
601
802
1
2
Maximum Candela = 801.82 Located At Horizontal Angle = 170, Vertical Angle = .5# 1 - Vertical Plane Through Horizontal Angles (170 - 350) (Through Max. Cd.)# 2 - Horizontal Cone Through Vertical Angle (.5) (Through Max. Cd.)
Step 1
Twist Adapter into Socket
Step 2
Insert Male Connector into Female Connector
Step 3
Insert LED into Can Housing (Recessed Can Housing Not Included)
INSTALLATION INSTRUCTIONS
Trim Bracket Adapter
ScrewsHooks
Prior to installing the fixture, disconnect ALL power supplies to the unit. This unit may be installed in TYPE IC installations.
Trim Bracket Adapter (TBA)Installation Instructions
If you are retrofitting an existing can, you may require this Trim Bracket Adapter option.
1. Remove the (3) screws around the perimeter of your existing can and keep them.
2. Insert the TBA into the can. Note the hooks face upward.
3. Align the slots with the threaded holes.
4. Make sure the bottom of the TBA is flush with the can.
5. Re-install the (3) screws through the TBA and back into the can.
Si estas readaptando una carcasa, puede que requieras de la opción TBA.
1. Remover los (3) tornillos al rededor del perímetro de tu carcasa existente y retenerlos.2. Insertar el TBA en la carcasa. Notar que los ganchos miren para arriba.3. Alineé las ranuras del TBA con los agujeros enroscados.4. Alinear la parte de abajo del TBA al rasgo de la carcasa.5. Atornillar los (3) tornillos por el TBA y de regreso a la carcasa.
519 Codisco Way • Sanford, FL 32771 • Ph: (407) 478-3759 • Fax: (407) 478-3760www.ilp-inc.com
www.ilp-inc.com Industrial Lighting Products 407-478-3759
ORDERING GUIDE:
Project Name:
Fixture tyPe:
LamPs/Board:
cataLog NumBer:
VoLts/Watts:
5 Y E A R W A R RA
NT
Y
FEATURES • PC Housing with Aluminum Heat Sink Inside • Easy Installation into Standard T8 Fixtures (Internal Driver),
Bypassing the Existing Ballast and Wiring to One Side of the Unshunted Lamp Holders Only
• Built-in Frosted Lens • 4000K Color Temperature • Safe and Cool to Touch • Mercury Free • 5 Year Warranty • IP60 Rated for Indoor Use • RoHS Compliant • UL Listed • DesignLights Consortium® Qualified (2)
LINEAR RETROFIT
T8 LED TUBE - 9W/18W LED
complies with
RoHS
LED SYSTEM2’-9W System 4’-18W System
Calculated L70 (TM-21) 50,000 hours 50,000 hoursDelivered Lumens 1,013 lm 1,938 lmTotal Input Watts 9 W 18 WLuminaire Efficacy Rating (LER) 114 lm/W 108 lm/WCorrelated Color Temperature (CCT) 4000 K 4000 KColor Rendering Index (CRI) > 80 > 80Max Ambient Temp 113˚ F 113 ˚ FUniversal Driver 120-277 V 120-277 V
SUITABLE APPLICATIONS • Shopping Malls • Offices • Parking Lots
REPLACES F17-T8, or F32-T8
LED System data above based on TB-2FT-9WLED-UNIV-4000K & TB-4FT-18WLED-UNIV-4000K(1) LED Lumen Maintenance Estimates based on TM-21 projections for the light source at 25˚C ambient(2) Specific Configurations Listed on DLC.
Part Number Full Description Options � TB-2FT-9WLED-UNIV-4000K 2 Foot T8 LED Tube, 9W, 120V-277V Internal Driver, 4000K Color Temp � TL4 Tall Unshunted Twist-Lock T8 � TB-4FT-18WLED-UNIV-4000K 4 Foot T8 LED Tube, 18W, 120V-277V Internal Driver, 4000K Color Temp � TL8 Short Unshunted Twist-Lock T8
www.ilp-inc.com Industrial Lighting Products 407-478-3759
EASY INSTALLATION
T8 LED TUBES - 9W/18W LEDLINEAR RETROFIT
TB-2FT-9WLED-UNIV-4000K
SUMMARY DATA
PLANE AND CONE DIAGRAM
Photometric values based upon tests performed in compliance with LM-79. IES files can be downloaded at www.ilp-inc.com
Two-Foot Linear Replacement Lamps3 lamps were tested in conjuction with 9 cell 2x2 parabolic troffer
HEMISPHERES TESTED: BOTHEFFICIENCY (Total): 99.8 %EFFICIENCY (Downlight): 99.4 %EFFICIENCY (Uplight): 0.5 %SPACING CRITERION (0-Deg.): 1.19SPACING CRITERION (90-Deg.): 1.64
74.5522 :PMAL/SNEMUL 1 :SPMAL FO .ON
LUMINOUS OPENING: RECTANGULAR)sreteM( 35.0 :htdiW
Length: 0.5300.0 :thgieH
97.62 :STTAW TUPNI
10 20 30 40 50
60
70
80
90
200
400
600
800
Quadralaterally Symmetric Solid: 0 Degrees Small Dash: 45 Degrees Large Dash: 90 Degrees
TB-4FT-18WLED-UNIV-4000K
SUMMARY DATA
PLANE AND CONE DIAGRAM
Photometric values based upon tests performed in compliance with LM-79. IES files can be downloaded at www.ilp-inc.com
Four-foot Linear Replacement Lamps2 LED tube lamps were tested in conjuction with lensed 2X4 troffer
HEMISPHERES TESTED: BOTHEFFICIENCY (Total): 99.8 %EFFICIENCY (Downlight): 99.1 %EFFICIENCY (Uplight): 0.6 %SPACING CRITERION (0-Deg.): 1.21SPACING CRITERION (90-Deg.): 1.28
75.9503 :PMAL/SNEMUL 1 :SPMAL FO .ON
LUMINOUS OPENING: RECTANGULAR)sreteM( 45.0 :htdiW
Length: 1.1500.0 :thgieH
18.53 :STTAW TUPNI
10 20 30 40 50
60
70
80
90
250
500
750
1000
Quadralaterally Symmetric Solid: 0 Degrees Small Dash: 45 Degrees Large Dash: 90 Degrees
Shut off main power before starting work
Remove existing fluorescent tube(s)
Bypass existing ballast and starter (if any).
Install LED tube Turn on main power
Bypass existing ballast and starter (if any), using unshunted lamp holders only.
Please check the L/N marking on the lamp and insert the lamp toward electric supply. Diagram shown above is for one tube only. Repeat same rewiring for multiple tubes.
www.ilp-inc.com Industrial Lighting Products 407-478-3759
ORDERING GUIDE:
Project Name:
Fixture tyPe:
LamPs/Board:
cataLog NumBer:
VoLts/Watts:
5 Y E A R W A R RA
NT
Y
FEATURES • Die Cast Aluminum Housing • Hinged Front Frame for Easy Tool-less Access • Textured Architectural Bronze Powdercoat Finish • Dimple Textured Diffusive Tempered Glass Lens • Watertight Cord Grip Installed • Standard Yoke Included • Box Mounting Options Also Available
(3’ Cord and Watertight Bushing Included) • 4000K (Std) • Rated for Outdoor Use • 5 Year Warranty • DesignLights Consortium® Qualified (2)
LED SYSTEMCalculated L70 (TM-21) 75,000 hoursDelivered Lumens 887 lmTotal Input Watts 11.5 WLuminaire Efficacy Rating (LER) 77.1 lm/WCorrelated Color Temperature (CCT) 4000 KColor Rendering Index (CRI) > 80Max Ambient Temp 105˚ FUniversal Driver 120-277 V
OUTDOOR LIGHTING
SMALL FLOOD - 10W LED
complies with
RoHS
REPLACES 40W MH
SUITABLE APPLICATIONS • Parking lots • Buildings • General area lighting
Part Number Full Description Options � FS-10WLED-UNIV-4000K Small Flood with Yoke - 10W, 120V-277V, 4000K Color Temp � BMA Box Mount Adapter (3’ cord & bushing incl.)
� CORDx Cord (X = ft)
LED System data above based on FS-10WLED-UNIV-4000K(1) LED Lumen Maintenance Estimates based on TM-21 projections for the light source at 25˚C ambient(2) Specific Configurations Listed on DLC.
www.ilp-inc.com Industrial Lighting Products 407-478-3759
OUTDOOR LIGHTING
MOUNTING OPTIONS
SMALL FLOOD - 10W LED
Optional Photocell Mounting Location: Bottom of Fixture
Optional Photocell Mounting Location: Bottom of FixtureFS-10WLED FMS-20WLED FML-40WLED FLL-80W/60WLED
5.83”
7.09”
9.61”
11.65”
2.91”
3.74”
7.13
”
8.58
”
8”
9.57
”
12.9
1”
15.5
9”
13.9
4”
11.5
4”
2.32”2.15”
.34”.34”
.43”
.43”
5.35”6.46”5.95”7.05” 9.69”
8.86”
10.75”
11.65”
3.94”
5.12”
.79” .79”
1.18” 1.42”
2”
2.25”
• Standard Yoke Included(EPA Rating: 0.35ft2 )
Also Available:
• Box Mount Adapter (BMA) - Includes 3 ft cord and watertight bushing
(EPA Rating: 0.36ft2 )
FS-10WLED-UNIV-4000K
SUMMARY DATA
PLANE AND CONE DIAGRAM
Photometric values based upon tests performed in compliance with LM-79. IES files can be downloaded at www.ilp-inc.com
120.0V 0.0993A 11.5W PF= 0.965LUMINAIRE OUTPUT = 877 LM
HEMISPHERES TESTED: LOWEREFFICIENCY (Total): 100.0 %EFFICIENCY (Street / House): 50.2 % / 49.8 %ROADWAY CLASSIFICATION: TYPE VSCUTOFF CLASSIFICATION: CUTOFF
879.89 :PMAL/SNEMUL 1 :SPMAL FO .ON
LUMINOUS OPENING: RECTANGULAR)teeF( 0.34 :htdiW
Length: 0.3000.0 :thgieH
11.5 :STTAW TUPNI
10 20 30 40
50
60
70
80
90
100
110
120
130
140 150 160 170 170 160 150 140
130
120
110
100
90
80
70
60
50
40 30 20 10
200
400
MAX CANDLEPOWER: 440.8 Max plane at H = 0 Max cone at V = 7.5
BMA
www.ilp-inc.com Industrial Lighting Products 407-478-3759
ORDERING GUIDE:
Project Name:
Fixture tyPe:
LamPs/Board:
cataLog NumBer:
VoLts/Watts:
5 Y E A R W A R RA
NT
Y
FEATURES • Die Cast Aluminum Housing • Hinged Front Frame for Easy Tool-less Access • Textured Architectural Bronze Powdercoat Finish • Dimple Textured Diffusive Tempered Glass Lens • Watertight Cord Grip Installed • Standard Yoke Included • Box Mounting Options Also Available
(3’ Cord and Watertight Bushing Included) • 4000K (Std) • Rated for Outdoor Use • 5 Year Warranty • DesignLights Consortium® Qualified (2)
LED SYSTEMCalculated L70 (TM-21) 73,000 hoursDelivered Lumens 1,475 lmTotal Input Watts 18.9 WLuminaire Efficacy Rating (LER) 78.2 lm/WCorrelated Color Temperature (CCT) 4000 KColor Rendering Index (CRI) > 80Max Ambient Temp 110˚ FUniversal Driver 120-277 V
OUTDOOR LIGHTING
SMALL FLOOD - 20W LED
complies with
RoHS
REPLACES 70W MH
SUITABLE APPLICATIONS • Parking lots • Buildings • General area lighting
Part Number Full Description Options � FMS-20WLED-UNIV-4000K Small Flood with Yoke - 20W, 120V-277V, 4000K Color Temp � BMA Box Mount Adapter (3’ cord & bushing incl.)
� CORDx Cord (X = ft)
LED System data above based on FMS-20WLED-UNIV-4000K(1) LED Lumen Maintenance Estimates based on TM-21 projections for the light source at 25˚C ambient(2) Specific Configurations Listed on DLC.
www.ilp-inc.com Industrial Lighting Products 407-478-3759
OUTDOOR LIGHTING
MOUNTING OPTIONS
SMALL FLOOD - 20W LED
Optional Photocell Mounting Location: Bottom of Fixture
Optional Photocell Mounting Location: Bottom of FixtureFS-10WLED FMS-20WLED FML-40WLED FLL-80W/60WLED
5.83”
7.09”
9.61”
11.65”
2.91”
3.74”
7.13
”
8.58
”
8”
9.57
”
12.9
1”
15.5
9”
13.9
4”
11.5
4”
2.32”2.15”
.34”.34”
.43”
.43”
5.35”6.46”5.95”7.05” 9.69”
8.86”
10.75”
11.65”
3.94”
5.12”
.79” .79”
1.18” 1.42”
2”
2.25”
• Standard Yoke Included(EPA Rating: 0.50ft2 )
Also Available:
• Box Mount Adapter (BMA) - Includes 3 ft cord and watertight bushing
(EPA Rating: 0.51ft2 )
FMS-20WLED-UNIV-4000K
SUMMARY DATA
PLANE AND CONE DIAGRAM
Photometric values based upon tests performed in compliance with LM-79. IES files can be downloaded at www.ilp-inc.com
120.0V 0.1579A 18.87W PF= 0.996LUMINAIRE OUTPUT = 1475 LM
HEMISPHERES TESTED: LOWEREFFICIENCY (Total): 100.0 %EFFICIENCY (Street / House): 50.3 % / 49.7 %ROADWAY CLASSIFICATION: TYPE VSCUTOFF CLASSIFICATION: CUTOFF
1445.316 :PMAL/SNEMUL 1 :SPMAL FO .ON
LUMINOUS OPENING: RECTANGULAR)teeF( 0.43 :htdiW
Length: 0.3800.0 :thgieH
18.5 :STTAW TUPNI
10 20 30 40
50
60
70
80
90
100
110
120
130
140 150 160 170 170 160 150 140
130
120
110
100
90
80
70
60
50
40 30 20 10
350
700
MAX CANDLEPOWER: 767.5 Max plane at H = 165 Max cone at V = 2
BMA
www.ilp-inc.com Industrial Lighting Products 407-478-3759
ORDERING GUIDE:
Project Name:
Fixture tyPe:
LamPs/Board:
cataLog NumBer:
VoLts/Watts:
5 Y E A R W A R RA
NT
Y
FEATURES • Die Cast Aluminum Housing • Hinged Front Frame for Easy Tool-less Access • Textured Architectural Bronze Powdercoat Finish • Dimple Textured Diffusive Tempered Glass Lens • Watertight Cord Grip Installed • Standard Yoke Included • Box Mounting Options Also Available
(3’ Cord and Watertight Bushing Included) • 4000K (Std) • Rated for Outdoor Use • 5 Year Warranty • DesignLights Consortium® Qualified (2)
LED SYSTEMCalculated L70 (TM-21) 65,000 hoursDelivered Lumens 2,461 lmTotal Input Watts 34.7 WLuminaire Efficacy Rating (LER) 70.9 lm/WCorrelated Color Temperature (CCT) 4000 KColor Rendering Index (CRI) > 80Max Ambient Temp 105˚ FUniversal Driver 120-277 V
OUTDOOR LIGHTING
MEDIUM FLOOD - 40W LED
complies with
RoHS
REPLACES 100W MH
SUITABLE APPLICATIONS • Parking lots • Buildings • General area lighting
Part Number Full Description Options � FML-40WLED-UNIV-4000K Medium Flood with Yoke - 40W, 120V-277V, 4000K Color Temp � BMA Box Mount Adapter (3’ cord & bushing incl.)
� CORDx Cord (X = ft)
� PCxxx Photocell (xxx = Voltage)
� GS Glare Shield � WG Wire Guard
LED System data above based on FML-40WLED-UNIV-4000K(1) LED Lumen Maintenance Estimates based on TM-21 projections for the light source at 25˚C ambient(2) Specific Configurations Listed on DLC.
www.ilp-inc.com Industrial Lighting Products 407-478-3759
OUTDOOR LIGHTING
MOUNTING OPTIONS
MEDIUM FLOOD - 40W LED
Optional Photocell Mounting Location: Bottom of Fixture
Optional Photocell Mounting Location: Bottom of FixtureFS-10WLED FMS-20WLED FML-40WLED FLL-80W/60WLED
5.83”
7.09”
9.61”
11.65”
2.91”
3.74”
7.13
”
8.58
”
8”
9.57
”
12.9
1”
15.5
9”
13.9
4”
11.5
4”
2.32”2.15”
.34”.34”
.43”
.43”
5.35”6.46”5.95”7.05” 9.69”
8.86”
10.75”
11.65”
3.94”
5.12”
.79” .79”
1.18” 1.42”
2”
2.25”
• Standard Yoke Included(EPA Rating: 0.92ft2 )
Also Available:
• Box Mount Adapter (BMA) - Includes 3 ft cord and watertight bushing
(EPA Rating: 0.93ft2 )
FML-40WLED-UNIV-4000K
SUMMARY DATA
PLANE AND CONE DIAGRAM
Photometric values based upon tests performed in compliance with LM-79. IES files can be downloaded at www.ilp-inc.com
120.0V 0.2917A 34.7W PF=0.9906LUMINAIRE OUTPUT = 2461 LM
HEMISPHERES TESTED: LOWEREFFICIENCY (Total): 100.0 %EFFICIENCY (Street / House): 50.2 % / 49.8 %ROADWAY CLASSIFICATION: TYPE VSCUTOFF CLASSIFICATION: CUTOFF
2446.24 :PMAL/SNEMUL 1 :SPMAL FO .ON
LUMINOUS OPENING: RECTANGULAR)teeF( 0.00 :htdiW
Length: 0.0000.0 :thgieH
34.7 :STTAW TUPNI
10 20 30 40
50
60
70
80
90
100
110
120
130
140 150 160 170 170 160 150 140
130
120
110
100
90
80
70
60
50
40 30 20 10
500
1000
MAX CANDLEPOWER: 1141 Max plane at H = 55 Max cone at V = 6
BMA
OPTIONS
GSGlare Shield
WGWire Guard
www.ilp-inc.com Industrial Lighting Products 407-478-3759
ORDERING GUIDE:
Project Name:
Fixture tyPe:
LamPs/Board:
cataLog NumBer:
VoLts/Watts:
5 Y E A R W A R RA
NT
Y
FEATURES • Dual Wattage Selection - 80W or 60W • Hinged Front Frame for Easy Tool-less Access
to Rocker Switch and Ballast • Die Cast Aluminum Housing • Textured Architectural Bronze Powdercoat Finish • Dimple Textured Diffusive Tempered Glass Lens • Watertight Cord Grip Installed • Standard Yoke Included • Pole and Tenon Mounting Options Also Available
(3’ Cord and Watertight Bushing Included) • 4000K (Std) • Rated for Outdoor Use • 5 Year Warranty • DesignLights Consortium® Qualified (2)
OUTDOOR LIGHTING
LARGE FLOOD - 80W/60W LED
complies with
RoHS
LED SYSTEM80W System 60W System
Calculated L70 (TM-21) 73,000 hours 73,000 hoursDelivered Lumens 6,197 lm 5,212 lmTotal Input Watts 76.5 W 62.4 WLuminaire Efficacy Rating (LER) 81.8 lm/W 83.5 lm/WCorrelated Color Temperature (CCT) 4000 K 4000 KColor Rendering Index (CRI) > 80 > 80Max Ambient Temp 110˚ F 110 ˚ FUniversal Driver 120-277 V 120-277 V
SUITABLE APPLICATIONS • Parking lots • Buildings • General area lighting
REPLACES 150W-250W MH
Part Number Full Description Options � FLL-80W/60WLED-UNIV-4000K Large Flood with Yoke, 80W/60W, 120V-277V, 4000K Color Temp � PMB Pole Mount Bracket (3’ cord & bushing incl.)
� TMB Tenon Mount Bracket (3’ cord & bushing incl.)
� CORDx Cord (X = ft)
� PCxxx Photocell (xxx = Voltage)
� GS Glare Shield � WG Wire Guard � SP1 Surge Protector - 120V � SP2 Surge Protector - 277V
LED System data above based on FLL-80WLED-UNIV-4000K & FLL-60WLED-UNIV-4000K(1) LED Lumen Maintenance Estimates based on TM-21 projections for the light source at 25˚C ambient(2) Specific Configurations Listed on DLC.
www.ilp-inc.com Industrial Lighting Products 407-478-3759
OUTDOOR LIGHTING
LARGE FLOOD - 80W/60W LED
Optional Photocell Mounting Location: Bottom of Fixture
Optional Photocell Mounting Location: Bottom of FixtureFS-10WLED FMS-20WLED FML-40WLED FLL-80W/60WLED
5.83”
7.09”
9.61”
11.65”
2.91”
3.74”
7.13
”
8.58
”
8”
9.57
”
12.9
1”
15.5
9”
13.9
4”
11.5
4”
2.32”2.15”
.34”.34”
.43”
.43”
5.35”6.46”5.95”7.05” 9.69”
8.86”
10.75”
11.65”
3.94”
5.12”
.79” .79”
1.18” 1.42”
2”
2.25”
FLL-80WLED-UNIV-4000K
SUMMARY DATA
PLANE AND CONE DIAGRAM
Photometric values based upon tests performed in compliance with LM-79. IES files can be downloaded at www.ilp-inc.com
120.0V 1.771A 76.5W PF= 0.969LUMINAIRE OUTPUT = 6,197 LM
HEMISPHERES TESTED: LOWEREFFICIENCY (Total): 100.1 %EFFICIENCY (Street / House): 49.6 % / 50.5 %ROADWAY CLASSIFICATION: TYPE VSCUTOFF CLASSIFICATION: CUTOFF
6201.8 :PMAL/SNEMUL 1 :SPMAL FO .ON
LUMINOUS OPENING: RECTANGULAR)teeF( 00.0 :htdiW
Length: 0.0000.0 :thgieH
75.9 :STTAW TUPNI
10 20 30 40
50
60
70
80
90
100
110
120
130
140 150 160 170 170 160 150 140
130
120
110
100
90
80
70
60
50
40 30 20 10
1500
3000
MAX CANDLEPOWER: 2905.72 Max plane at H = 3 Max cone at V = 104
FLL-60WLED-UNIV-4000K
SUMMARY DATA
PLANE AND CONE DIAGRAM
Photometric values based upon tests performed in compliance with LM-79. IES files can be downloaded at www.ilp-inc.com
120.0V 0.5249A 62.5W PF=0.9914LUMINAIRE OUTPUT = 5212 LM
HEMISPHERES TESTED: LOWEREFFICIENCY (Total): 100.0 %EFFICIENCY (Street / House): 50.2 % / 49.8 %ROADWAY CLASSIFICATION: TYPE VSCUTOFF CLASSIFICATION: CUTOFF
5156.851 :PMAL/SNEMUL 1 :SPMAL FO .ON
LUMINOUS OPENING: RECTANGULAR)teeF( 0.00 :htdiW
Length: 0.0000.0 :thgieH
62.5 :STTAW TUPNI
10 20 30 40
50
60
70
80
90
100
110
120
130
140 150 160 170 170 160 150 140
130
120
110
100
90
80
70
60
50
40 30 20 10
1500
3000
MAX CANDLEPOWER: 2500.5 Max plane at H = 5 Max cone at V = 7
MOUNTING OPTIONS
OPTIONS
• Standard Yoke Included(EPA Rating: 1.36ft2 Vertically / 0.61ft2 Horizontally)
Also Available:
• Pole Mounting Bracket (PMB) - Includes 3 ft cord and watertight bushing
(EPA Rating: 1.42ft2 Vertically / 0.67ft2 Horizontally)
• Tenon Mounting Bracket (TMB) - Includes 3 ft cord and watertight bushing
(EPA Rating: 1.43ft2 Vertically / 0.68ft2 Horizontally)
PMB TMB
Features a hinged front frame for easy tool-less access to the rocker switch to convert the output Watts to either 80W or 60W, depending on your particular needs.
GSGlare Shield
WGWire Guard
Shown with Large Dual Flood
Shown with Large Dual Flood
Optional mounting brackets are ship-with accessories
www.ilp-inc.com Industrial Lighting Products 407-478-3759
ORDERING GUIDE:
Project Name:
Fixture tyPe:
LamPs/Board:
cataLog NumBer:
VoLts/Watts:
5 Y E A R W A R RA
NT
Y
FEATURES • Dual Wattage Selection - 120W or 100W • Hinged Front Frame with Removable Back Cover
for Easy Access to Rocker Switch and Ballast • Die Cast Aluminum Housing • Textured Architectural Bronze Powdercoat Finish • Dimple Textured Diffusive Tempered Glass Lens • Watertight Cord Grip Installed • Standard Yoke Included • Pole and Tenon Mounting Options Also Available
(3’ Cord and Watertight Bushing Included) • 4000K (Std) • Rated for Outdoor Use • 5 Year Warranty • DesignLights Consortium® Qualified (2)
LED SYSTEM120W System 100W System
Calculated L70 (TM-21) 65,000 hours 65,000 hoursDelivered Lumens 10,210 lm 9,117 lmTotal Input Watts 118.0 W 100.8 WLuminaire Efficacy Rating (LER) 86.5 lm/W 90.4 lm/WCorrelated Color Temperature (CCT) 4000 K 4000 KColor Rendering Index (CRI) > 80 > 80Max Ambient Temp 120˚ F 120˚ FUniversal Driver 120-277 V 120-277 V
SUITABLE APPLICATIONS • Parking lots • Buildings • General area lighting
OUTDOOR LIGHTING
LARGE DUAL FLOOD - 120W/100W LED
REPLACES 250W-400W MH
complies with
RoHS
Part Number Full Description Options � FDL-120W/100WLED-UNIV-4000K Large Dual Flood with Yoke, 120W/100W, 120V-277V, 4000K Color Temp � PMB Pole Mount Bracket (3’ cord & bushing incl.)
� TMB Tenon Mount Bracket (3’ cord & bushing incl.)
� CORDx Cord (X = ft)
� PCxxx Photocell (xxx = Voltage)
� GS Glare Shield � WG Wire Guard � SP1 Surge Protector - 120V � SP2 Surge Protector - 277V
LED System data above based on FDL-120WLED-UNIV-4000K & FDL-100WLED-UNIV-4000K(1) LED Lumen Maintenance Estimates based on TM-21 projections for the light source at 25˚C ambient(2) Specific Configurations Listed on DLC.
www.ilp-inc.com Industrial Lighting Products 407-478-3759
OUTDOOR LIGHTING
LARGE DUAL FLOOD - 120W/100W LED
FDL-120WLED-UNIV-4000K
SUMMARY DATA
PLANE AND CONE DIAGRAM
Photometric values based upon tests performed in compliance with LM-79. IES files can be downloaded at www.ilp-inc.com
120.0V 0.9934A 118.2W PF=0.991LUMINAIRE OUTPUT = 10210 LM
HEMISPHERES TESTED: LOWEREFFICIENCY (Total): 100.0 %EFFICIENCY (Street / House): 50.2 % / 49.8 %ROADWAY CLASSIFICATION: TYPE VSCUTOFF CLASSIFICATION: CUTOFF
10015.15 :PMAL/SNEMUL 1 :SPMAL FO .ON
LUMINOUS OPENING: RECTANGULAR)teeF( 0.00 :htdiW
Length: 0.0000.0 :thgieH
118.2 :STTAW TUPNI
10 20 30 40
50
60
70
80
90
100
110
120
130
140 150 160 170 170 160 150 140
130
120
110
100
90
80
70
60
50
40 30 20 10
2000
4000
MAX CANDLEPOWER: 4454.9 Max plane at H = 60 Max cone at V = 1
Optional Photocell Mounting Location: Either Side of Back Cover
.41”3-
1.46”
11.8
1”
20.2
8”
17.1
3”
5.79”
7.87”
16.54”
FDL-120W/100WLED
FDL-100WLED-UNIV-4000K
SUMMARY DATA
PLANE AND CONE DIAGRAM
Photometric values based upon tests performed in compliance with LM-79. IES files can be downloaded at www.ilp-inc.com
120.0V 0.8507A 101.0W PF=0.989LUMINAIRE OUTPUT = 9117 LM
HEMISPHERES TESTED: LOWEREFFICIENCY (Total): 100.0 %EFFICIENCY (Street / House): 50.0 % / 50.0 %ROADWAY CLASSIFICATION: TYPE VSCUTOFF CLASSIFICATION: CUTOFF
8931.938 :PMAL/SNEMUL 1 :SPMAL FO .ON
LUMINOUS OPENING: RECTANGULAR)teeF( 0.00 :htdiW
Length: 0.0000.0 :thgieH
101 :STTAW TUPNI
10 20 30 40
50
60
70
80
90
100
110
120
130
140 150 160 170 170 160 150 140
130
120
110
100
90
80
70
60
50
40 30 20 10
2000
4000
MAX CANDLEPOWER: 3969.6 Max plane at H = 120 Max cone at V = 1
MOUNTING OPTIONS
OPTIONS
• Standard Yoke Included(EPA Rating: 2.23ft2 Vertically / 1.00ft2 Horizontally)
Also Available:
• Pole Mounting Bracket (PMB) - Includes 3 ft cord and watertight bushing
(EPA Rating: 2.31ft2 Vertically / 1.08ft2 Horizontally)
• Tenon Mounting Bracket (TMB) - Includes 3 ft cord and watertight bushing
(EPA Rating: 2.32ft2 Vertically / 1.09ft2 Horizontally)
PMB TMB
Features a removable back cover for easy access to the rocker switch to convert the output Watts to either 120W or 100W, depending on your particular needs.
GSGlare Shield
WGWire Guard
Optional mounting brackets are ship-with accessories
www.ilp-inc.com Industrial Lighting Products 407-478-3759
ORDERING GUIDE:
Project Name:
Fixture tyPe:
LamPs/Board:
cataLog NumBer:
VoLts/Watts:
5 Y E A R W A R RA
NT
Y
FEATURES • Dual Wattage Selection - 160W or 140W • Hinged Front Frame with Removable Back Cover
for Easy Access to Rocker Switch and Ballast • Die Cast Aluminum Housing • Textured Architectural Bronze Powdercoat Finish • Dimple Textured Diffusive Tempered Glass Lens • Watertight Cord Grip Installed • Standard Yoke Included • Pole and Tenon Mounting Options Also Available
(3’ Cord and Watertight Bushing Included) • 4000K (Std) • Rated for Outdoor Use • 5 Year Warranty • DesignLights Consortium® Qualified (2)
OUTDOOR LIGHTING
LARGE DUAL FLOOD - 160W/140W LED
complies with
RoHS
LED SYSTEM160W System 140W System
Calculated L70 (TM-21) 74,000 hours 74,000 hoursDelivered Lumens 15,530 lm 13,760 lmTotal Input Watts 160.0 W 137.4 WLuminaire Efficacy Rating (LER) 97 lm/W 100 lm/WCorrelated Color Temperature (CCT) 4000 K 4000 KColor Rendering Index (CRI) > 80 > 80Max Ambient Temp 110˚ F 110˚ FUniversal Driver 120-277 V 120-277 V
SUITABLE APPLICATIONS • Parking lots • Buildings • General area lighting
REPLACES 400W MH
Part Number Full Description Options � FDL-160W/140WLED-UNIV-4000K Large Dual Flood with Yoke, 160W/140W, 120V-277V, 4000K Color Temp � PMB Pole Mount Bracket (3’ cord & bushing incl.)
� TMB Tenon Mount Bracket (3’ cord & bushing incl.)
� CORDx Cord (X = ft)
� PCxxx Photocell (xxx = Voltage)
� GS Glare Shield � WG Wire Guard � SP1 Surge Protector - 120V � SP2 Surge Protector - 277V
LED System data above based on FDL-160WLED-UNIV-4000K & FDL-140WLED-UNIV-4000K(1) LED Lumen Maintenance Estimates based on TM-21 projections for the light source at 25˚C ambient(2) Specific Configurations Listed on DLC.
www.ilp-inc.com Industrial Lighting Products 407-478-3759
OUTDOOR LIGHTING
LARGE DUAL FLOOD - 160W/140W LED
FDL-160WLED-UNIV-4000K
SUMMARY DATA
PLANE AND CONE DIAGRAM
Photometric values based upon tests performed in compliance with LM-79. IES files can be downloaded at www.ilp-inc.com
120.0V 1.354A 161.8W PF= 0.995LUMINAIRE OUTPUT = 14,110 LM
HEMISPHERES TESTED: LOWEREFFICIENCY (Total): 100.0 %EFFICIENCY (Street / House): 50.3 % / 49.7 %ROADWAY CLASSIFICATION: TYPE VSCUTOFF CLASSIFICATION: CUTOFF
11.62831 :PMAL/SNEMUL 1 :SPMAL FO .ON
LUMINOUS OPENING: RECTANGULAR)teeF( 62.1 :htdiW
Length: 0.8700.0 :thgieH
8.161 :STTAW TUPNI
10 20 30 40
50
60
70
80
90
100
110
120
130
140 150 160 170 170 160 150 140
130
120
110
100
90
80
70
60
50
40 30 20 10
2500
5000
MAX CANDLEPOWER: 5924 Max plane at H = 40 Max cone at V = 1
FDL-140WLED-UNIV-4000K
SUMMARY DATA
PLANE AND CONE DIAGRAM
Photometric values based upon tests performed in compliance with LM-79. IES files can be downloaded at www.ilp-inc.com
120.0V 1.157A 138.09W PF=0.9944LUMINAIRE OUTPUT = 13760 LM
HEMISPHERES TESTED: LOWEREFFICIENCY (Total): 100.0 %EFFICIENCY (Street / House): 50.3 % / 49.7 %ROADWAY CLASSIFICATION: TYPE VSCUTOFF CLASSIFICATION: CUTOFF
13678.4 :PMAL/SNEMUL 1 :SPMAL FO .ON
LUMINOUS OPENING: RECTANGULAR)teeF( 0.00 :htdiW
Length: 0.0000.0 :thgieH
138 :STTAW TUPNI
10 20 30 40
50
60
70
80
90
100
110
120
130
140 150 160 170 170 160 150 140
130
120
110
100
90
80
70
60
50
40 30 20 10
2500
5000
MAX CANDLEPOWER: 6012.7 Max plane at H = 15 Max cone at V = 1
Optional Photocell Mounting Location: Either Side of Back Cover
.41”3-
1.46”
11.8
1”
20.2
8”
17.1
3”
5.79”
7.87”
16.54”
FDL-160W/140WLED
MOUNTING OPTIONS
OPTIONS
• Standard Yoke Included(EPA Rating: 2.23ft2 Vertically / 1.00ft2 Horizontally)
Also Available:
• Pole Mounting Bracket (PMB) - Includes 3 ft cord and watertight bushing
(EPA Rating: 2.31ft2 Vertically / 1.08ft2 Horizontally)
• Tenon Mounting Bracket (TMB) - Includes 3 ft cord and watertight bushing
(EPA Rating: 2.32ft2 Vertically / 1.09ft2 Horizontally)
PMB TMB
Features a removable back cover for easy access to the rocker switch to convert the output Watts to either 160W or 140W, depending on your particular needs.
GSGlare Shield
WGWire Guard
Optional mounting brackets are ship-with accessories
www.ilp-inc.com Industrial Lighting Products 407-478-3759
ORDERING GUIDE:
Project Name:
Fixture tyPe:
LamPs/Board:
cataLog NumBer:
VoLts/Watts:
FEATURES • Extruded Aluminum Housing with Flush Mounting Base &
Vandal-Resistant Screws • Flat Top Design with Aluminum Cone Reflector • Powder Coat Finish Over a Chromate Conversion Coating,
Available in White, Black, or Bronze • Internal Ballast Tray for Easy Maintenance • Clear Polycarbonate Lens • Mounting Kit with 8˝ Anchor Bolts (Included),
Additional Lengths Available • Listed for Wet Locations • 5 Year Warranty • DesignLights Consortium® Qualified (2)
OUTDOOR LIGHTING
FLAT TOP BOLLARD - 15W LED
SUITABLE APPLICATIONS • Walkways • Boardwalks • Parking Lots
REPLACES 75W-100W MH
LED System data above based on BLFT-15WLED-UNIV-4000K(1) LED Lumen Maintenance Estimates based on TM-21 projections for the light source at 25˚C ambient(2) Specific Configurations Listed on DLC.(120V version only)
LED SYSTEMBoard (Samsung Chips) 1 x 88Calculated L70 (TM-21) > 50,000 hrsDelivered Lumens 1,101 lmTotal Input Watts 17.76 WLuminaire Efficacy Rating (LER) 62 lm/WCorrelated Color Temperature (CCT) 4000 KColor Rendering Index (CRI) > 80Max Ambient Temp 110˚ FUniversal Driver 120-277 V
BLFT 15WLED UNIV 4000K eg: WHP
Series LED Driver Color Options � BLFT Flat Top Bollard � 15WLED 1x88 Board � UNIV 120-277 Driver � 4000K � WHP White Paint (Std)
� BKP Black Paint � BRP Bronze Paint � RPL Replacement Polycarbonate Lens � AB4 Bracket & Three (3) 4˝ Anchor Bolts � AB12 Bracket & Three (3) 12˝ Anchor Bolts � AB15 Bracket & Three (3) 15˝ Anchor Bolts
5 Y E A R W A R RA
NT
Y
www.ilp-inc.com Industrial Lighting Products 407-478-3759
MOUNTING OPTIONS & ACCESSORIES
42 1/8”
7”
• AB4 - Mounting Kit, Includes Bracket & Three (3) 4˝ Anchor Bolts
• AB12 - Mounting Kit, Includes Bracket & Three (3) 12˝ Anchor Bolts
• AB15 - Mounting Kit, Includes Bracket & Three (3) 15˝ Anchor Bolts
• RPL - Replacement Polycarbonate Lens
RPL
ABx (x = inches, 4, 8, 12, 15) RPL
ABx (x = inches, 4, 8, 12, 15)
FLAT TOP BOLLARD - 15W LEDOUTDOOR LIGHTING
BLFT-15WLED-UNIV-4000K
SUMMARY DATA
PLANE AND CONE DIAGRAM
Photometric values based upon tests performed in compliance with LM-79. IES files can be downloaded at www.ilp-inc.com
LUMINAIRE OUTPUT: 1104 Lms.120.0V 0.1481A 17.75W PF= 0.998
HEMISPHERES TESTED: BOTHEFFICIENCY (Down / Up): 95.2 % / 4.8 %EFFICIENCY (Street / House): 50.5 % / 49.5 %ROADWAY CLASSIFICATION: TYPE VSCUTOFF CLASSIFICATION: CUTOFF
55.9011 :PMAL/SNEMUL 1 :SPMAL FO .ON
LUMINOUS OPENING: VERTICAL CYLINDERDiameter: 0.58 (Feet)
25.0 :thgieH 8.71 :STTAW TUPNI
10 20 30 40
50
60
70
80
90
100
110
120
130
140 150 160 170 170 160 150 140
130
120
110
100
90
80
70
60
50
40 30 20 10
200
400
MAX CANDLEPOWER: 408.7 Max plane at H = 180 Max cone at V = 42.5