dando drilling se asia

6

Upload: khangminh22

Post on 28-Nov-2023

0 views

Category:

Documents


0 download

TRANSCRIPT

Carrier Crawler mounted as standard with multiple bolt-on track optionsTruck mounted available as an optionRadio remote tracking with manual override or pilot hydraulic umbilical chest pack

Levelling Jacks 4 jack legs with automatic counter balance valveDeck Engine John Deere 6090- 350hp

CAT C7.1 Tier 4 Final- 250hpOther engine options available

Drill Mast Single box construction

4.2m head travel. Other lengths available

Hydraulic cylinder/chain driven system. Auto tensioned

Pullback: 10,000kgf

Mast Dump Allows for angle drilling to 45 degrees c/w support struts.Main Winch Maximum single line pull: 2000kgf

Maximum speed: 40m/minuteDrum capacity: 65m of 13mm wire rope

Water Pump FMC L1122 - 284 lpm - 1000 psi (other optional water pump sizes available)

Hydraulic System Hydraulic power circuit based on load sensing hydraulic pumps and proportional control valves

525L hydraulic reservoirTwin electric hydraulic oil cooler

Sonic Head Sonicor 50K rotary head with side shift and tilt frameSonic output force: 50,000 lbs

Sonic frequency: 0-150 HzRotation: 0-140 rpm

Rotation torque: 7000 ft-lb @ 0-140 rpm

Control Console Swing out control panelErgonomic configurationDirect hydraulic control valves with minimal electric controlsPilot control valves

Clamps As standard: Double acting hydraulic make up and break out clamp with clamping diameter of 60-250mmOther options available, including double acting breakout table to 340mm or triple breakout clamps

Options Automatic single rod handler with 180 degree wristLockable waterproof deck boxes x 2Mast lighting packageAuxiliary service lines with electrical, air and hydraulic quick disconnectsMast mounted automatic SPT trip hammer (63.5kg) - Complete with electronic blow counterLarger tooling and wireline winches availableCold weather winterisation package