28 – 30, APRIL 2021Bombay Exhibition Centre, Mumbai, INDIA

March 10, 2021

INDEX

INDUSTRY NEWS.............................................................................. 3 - 7

8 - 12

13 - 15

16

17 - 20

21

22 - 26

INDUSTRY UPDATES.........................................................................

NEW TECHNOLOGIES.........................................................................

PARTNERSHIP OPPORTUNITIES........................................................

MEDIA SPEAK..................................................................................

ROOF INDIA 2021..............................................................................

SOME LEADING COMPANIES AT THE EVENT....................................

INDUSTRY NEWS

3

Major boost to India’s COVID-19 vaccination drive: Nearly 11 lakh doses administered on March 4

With first dose, PM Modi joins ranks of world leaders vaccinated against Covid

With the government on March 2 allowing all private hospitals with adequate facilities to administer COVID-19 vaccine doses, the vaccination drive has seen a big jump in the last two days. The union ministry of health and family welfare in its order had asked states and UTs to utilise 100 per cent capacities of private hospitals functioning as COVID vaccination centres (CVCs). In a significant achievement, 10.93 lakh vaccine doses were given to beneficiaries till 7 pm on March 4 and while close to 10 lakhs were given on Wednesday.Notably, the vaccination drive has seen a jump of around 5 lakh doses per day.As per the health ministry, a total of 1,77,11,287 vaccine doses were

administered till 7 pm on March 4. AS per the latest data available, 68,38,077 health care workers (HCWs) have taken the first dose and 30,82,942 HCWs have taken the second dose. Besides this, 60,22,136 frontline workers (FLWs) have received the first dose and 54,177 FLWs the second dose.The Centre said that 14,95,016 beneficiaries more than 60 years old and 2,18,939 beneficiaries aged 45 and above with specific co-morbidities have also received the first dose of the vaccine.India launched its vaccination program on January 16, 2021. The government has so far approved the use of Bharat Biotech's COVAXIN and Covishield manufactured by Pune-based Serum Institute of India partnered with Oxford University.India's coronavirus vaccination drive ramped up after the government allowed private hospitals not under AB-PMJAY, CGHS and State Insurance Schemes be also utilised as CVCs.Following a detailed discussion on the status of vaccination in various states/UTs, the governmnet to uti l ise "100 per cent c a p a c i t i e s o f a l l p r i va t e h o s p i t a l s empanelled under Ayushman Bharat- Pradhan Mantri Jan Arogya Yojana (AB-PMJAY), Central Government Health Scheme (CGHS), and State Health Insurance Schemes to enable them to effectively function as COVID Vaccination Centers (CVCs)."Private hospitals not empanelled under the above mentioned three categories have also been permitted to operate as CVCs if they have adequate number of vaccinators,

adequate space for observation of the vaccinated, adequate cold chain arrangement and adequate arrangement for management of AEFI. States/UTs can proactively make efforts to use these private hospitals as CVCs, the health ministry said.

– Timesnownews.com

Prime Minister Narendra Modi, 70, on st

1 March became one of the few prominent world leaders to have received the vaccine against the coronavirus disease (Covid-19). Among the Group of 20 countries, PM Modi is only the ninth leader to receive at least the first shot of the Covid-19 vaccine.Among the first was Israeli Prime Minister Benjamin Netanyahu, 71, closely followed by US President Joe Biden, 78. Netanyahu was the first Israeli to be inoculated. He was administered the vaccine developed Pfizer-BioNTech on live TV as the Prime Minister said he wanted to set a “personal example” to encourage other Israelis to get the shot.Biden received his first shot of the Pfizer-BioNTech vaccine in December last year, a month before being officially sworn in. He also took the vaccine on live television to counter vaccine hesitancy in the US, which is the worst-affected by the virus in the world, in a marked contrast to the mixed messages sent by former president Donald Trump.“I’m doing this to demonstrate that people

4

should be prepared when it’s available to take the vaccine,” Biden had told reporters in Newark, Delaware, where he got the jab. “There’s nothing to worry about.” He received the second jab in early January.PM Modi’s first jab follows that of Australian Prime Minister Scott Morrison, who also took the Pfizer-BioNTech vaccine.“Pleased to get my #COVID19 vaccine today along with Australia’s CMO Professor Paul Kelly to give further confidence to Australians in these vaccines, which have been tested and approved by our medical experts, are safe and effective,” PM Morrison, 52, wrote on Twitter after receiving the shot in late February.Saudi King Salman, 85, received the first dose of the Pfizer vaccine in early January, three weeks after the kingdom started its vaccination programme. The country’s health ministry said the inoculations would be rolled out in three phases, starting with people over 65 and those with chronic ailments or at high risk of infection.His son, Crown Prince Mohammed bin Salman, considered the de facto leader of the country, was administered the vaccine in December. After the crown prince, 35, received his first jab of the Pfizer vaccine, registrations in Saudi Arabia to receive the vaccine increased five-fold, according to minister of health Dr Tawfiq Al-Rabiah.In January, President Alberto Fernandez, 61, received the first dose of the Russian-made Sputnik V Covid-19 vaccine in January, a day after Argentina’s health regulator cleared the vaccine for use among those aged 60 and above.

Turkish President Recep Tayyip Erdogan also received the first dose of a vaccine in January in front of TV cameras. He received a shot of the Chinese-developed Sinovac. “I believe it will be vital for political leaders and deputies to encourage the vaccination drive (by getting vaccinated) themselves,” Erdogan told reporters after receiving the vaccine.Indonesian President Joko Widodo, 59, also received his first dose of the Sinovac vaccine in January, after the country approved the vaccine and began its efforts to vaccinate the population. He was vaccinated along with top leaders across the country and even social media influencers in an effort to encourage people to take the vaccine when it is available to them.South African President Cyril Rampahosa was one of the first citizens to vaccinated, in January, with the one-shot Johnson & Johnson Covid-19 vaccine, which was also rolled out for health case workers. His vaccination was broadcast on live TV to build confidence among people. At the time, Johnson & Johnson was not authorised anywhere in the world and Ramaphosa effectively joined an observational study by taking the jab.

– Hindustan Times

A wave of government ministers in India this week got vaccinated with a locally produced COVID-19 jab from Bharat Biotech after Prime Minister Narendra Modi took the shot on Monday morning. The injections came before Bharat Biotech announced an efficacy figure for the first time on Wednesday. The company said in a press release on Wednesday evening that its vaccine is 81% effective in preventing COVID-19 infections after conducting an interim analysis of phase III trial data."Got my jab. For the curious, it was [Bharat Biotech's] #Covaxin," Subrahmanyam Jaishankar, India's minister of external affairs, said on Twitter on Monday evening. "Felt secure, will travel safely."India's government approved Covaxin, the COVID-19 vaccine produced by Bharat Biotech, in January even though the efficacy of the vaccine was unknown. Bharat Biotech's vaccine is likely safe, according to Phase I trial data from a small group of volunteers that the company published in the peer-reviewed medical journal The Lancet. But until Thursday, Bharat Biotech did not publish data saying that the vaccine is effective in preventing COVID-19 infections.Still, the vaccine seems to have won the full support of the Indian government.“Made-in-India vaccines are 100% safe,” Indian Health Minister Harsh Vardhan said after receiving the vaccine on Tuesday.In his statement about getting the vaccine, Minority Affairs Minister Mukhtar Abbas

Indian government officials are touting a homegrown vaccine over AstraZeneca’s

Naqvi also said it was safe. "I appeal to all those, who are eligible to take the vaccine, to get vaccinated and make India Corona free," Abbas tweeted after getting the vaccine Tuesday.Bharat Biotech said Thursday that it reached the 81% figure because 36 people got infected in a placebo group versus seven in the group that got vaccinated in its 25,800 person trial. The company said that it will continue the trial until there are 130 confirmed COVID-19 cases amongparticipants."Today is an important milestone in vaccine discovery, for science and our fight against coronavirus," Bharat Biotech chairman Krishna Ella said in the statement. "With today’s results from our Phase 3 clinical trials, we have now reported data on our COVID-19 vaccine from Phase 1, 2, and 3 trials."Before the announcement, it was unclear how much the Indian public trusted Bharat Biotech's jab in comparison to India's other approved vaccine, which was developed by AstraZeneca and Oxford University and is being produced locally by the Serum Institute of India. The AstraZeneca jab is 62% effective against COVID-19 infection.Government data shows that 12% of the 12 million Indians who have been vaccinated so far have received the Bharat Biotech jab, according to Reuters; the rest received AstraZeneca doses. In total, India plans to inoculate 300 million of its 1.4 billion people with COVID-19 vaccines by August.Before Bharat Biotech announced the efficacy figure, scientists were skeptical of

India's decision to roll out and promote a then-unproven vaccine and reject another, Russia's Sputnik V vaccine, which was proven effective.

– Fortune

India has supplied over 4.64 crore made-in-India COVID-19 vaccine doses to 47 countries as of Thursday (March 4). The outreach has won New Delhi a lot of goodwill from the global community. Of these, 71.25 lakh doses have been supplied as gifts, while over 3.93 crore have been sold commercially. The list of countries that received vaccines includes both developed and developing countries, from Africa to the Caribbean to ASEAN nations and to the neighbourhood as well.

Canada has received 5 lakh vaccine doses till Wednesday. The Pune-based Serum Institute of India will be sending 1.5 million more doses of the Covishield vaccine. In a tweet, India's envoy to Canada Ajay Bisaria said, "India is proud to support Canada's vaccination programme as a strategic partner."

– Zee News

World leaders thank PM Narendra Modi as India sends COVID-19 vaccines to 47 countries

145

146

India's economy is on an "upswing" and the government's plans for increased spending comes in the backdrop of pro-growth reforms, former Niti Aayog Vice Chairman Arvind Panagariya said on Tuesday even as he opined that it might take longer to become a USD 5 trillion economy due to the coronavirus pandemic-induced disruptions.The eminent economist described the government's decision to privatise two public sector banks next fiscal as an "unprecedented" effort to "finally right a wrong done 50 years ago".He was apparently referring to former Prime Minister Indira Gandhi's move to nationalise banks.

Panagariya, who is currently a Professor of Economics at the Columbia University, said the country's GDP growth in October-December 2020 quarter returned to a hair's breadth above its level a year ago."At 0.4 per cent, the year-on-year growth in GDP may seem low but given the large negative growth during the preceding two quarters ((-)24.4 per cent during April-June and and (-)7.3 per cent during July-Sept), the quarter-on-quarter growth momentum is very strong," he said.According to him, there are signs that the government is clearing past arrears at an accelerated pace and has also provided for doubling of government expenditure in the current quarter over the same quarter last year."These facts would help boost demand and give further impetus to growth at a time when the economy is on the upswing... So the news on the growth front is very encouraging," he said.To a query on whether it will be feasible now for India to achieve the target of becoming a USD 5 trillion economy by 2024-25, he said that given the unexpected COVID shock, "we may have to wait a year or two longer".In 2019, Prime Minister Narendra Modi envisioned to make India a USD 5 trillion economy and global power house by 2024-25.The pandemic has hit the economy hard and the country's GDP is projected to contract nearly 8 per cent in the current fiscal ending March.On whether he is in favour of reviewing the 2-6 per cent target inflation band, Panagariya

said, "I would favour revising the target up by 1 percentage point".In the past, he said the Monetary Policy Committee (MPC) had been quite reluctant to let the inflation rate rise above 4 per cent even though it has the room up to 6 per cent and was quite comfortable with the inflation staying around 2 per cent."Healthy GDP growth requires greater room for prices to adjust. Besides, enterprises draw up investment plans based on the growth of profits in nominal terms," he said, adding that the government wants low inflation to protect the poor but what matters for the poor is food inflation over which the RBI has very little control.The inflation target for the Reserve Bank of India's MPC for the next five years starting April is likely to be notified around mid-March. The current medium-term inflation target, which was notified in August 2016, ends on March 31.On the government's proposed asset reconstruct ion company and asset management company, Panagariya said, "one or the other way, we need a rapid clean up of NPAs".If the government can move swiftly to set up the bad bank and take out the bad assets from the bank balance sheets, it will be a major step in the right direction, he said. "If it (government) cannot do that fast, it should be prepared to recapitalise the banks on a much larger scale than currently provided."R e p l y i n g t o a q u e s t i o n o n fi s c a l expansionism, Panagariya said if the government had chosen to only expand

Indian economy on 'upswing'; govt set to spend more along with pro-growth reforms: Panagariya

147

spending to boost growth, ratings agencies may have seen it unfavourably."But the increase in spending has been proposed in the backdrop of a large number of pro-growth reforms, including a massive privatisation programme and creation of a "Bad Bank" to clean up NPAs," he said.Noting that the rating agencies look at what the government does holistically than focus on just one indicator such as fiscal deficit, he said, "I see no danger from the ratings agencies".On agitation by farmers against the new farm l a w s , P a n a g a r i ya p o i n t e d o u t t h a t discussions on APMC reforms are now 20 years old and every central government since Prime Minister A B Vajpayee has promoted the reforms.Further, he said that the Parliamentary Standing Committee on Agriculture called for the reforms as recently as December 2019 and nearly all farm organisations had also called for these reforms at one time or the other."In the end, the solution will have to be worked out through discussions and negotiations," Panagariya opined.

– The Economic Times

World Health Organization (WHO) director-general Tedros Adhanom Ghebreyesus has said he supports the temporary waiving of covid-19 vaccine patents to enable countries to manufacture and sell vaccine copies at reduced cost. “I don’t believe that globally we’re exercising our full manufacturing muscle at present. For example, some manufacturers have not been able to produce successful vaccine candidates, which is to be expected, but their production facilities could be repurposed for those vaccines that have been proven to work,” he wrote in the Guardian. “Waiving patents temporarily won’t mean innovators miss out. Like during the HIV crisis or in a war, companies will be paid royalties for the products they manufacture.” World Trade Organization member states are set to discuss a proposal by India and South Afr ica next week to waive rules on intellectual property for covid-19 drugs and vaccines. Worldwide, 265 million doses of covid-19 vaccines have been administered, with 80 per cent in just 10 countries, said Mike Ryan, executive director of the WHO’s Health Emergencies Program, during a social media Q&A on 3 March.

- NewScientist

WHO chief supports waiving covid-19 vaccine patents

Weekly e-news Alert Program - ‘Market News & Views’

This is a regular program which will cover Industry Updates, Launch of New Technologies, Partnership

Opportunities, Industry Views & CSR activities. The purpose of this program is to keep customers up to date with

developments in the Industry.

.................................................................................................................................................................

INDUSTRY UPDATES

KCC Buildcon and CDS Infra Projects have emerged as the lowest bidders for the construction of first 3 packages of the 600 km Delhi – Amritsar – Katra (DAK)Expressway. The expressway starts at KMP Expressway north-west Delhi and will be expandable to 8 lanes with a provision of service roads in future. It is a 4-lane greenfield project with a proposed RoW. The Detailed Project Report (DPR) andalignment studies were prepared byFeedback Infrastructure. Within Punjab, a 99 km spur will be constructed from km 306 to form half a ring around Amritsar and connect with its airport.The scope of work in Package 1 includes the construction of the Delh-Amritsar-Katra Expressway from Jussur Kheri on KMP Expressway to Junction with Rohtak Panipat road (NH 709) near Rukhi Paani village (Km 0.000 to Km 34.000) on HAM

under the Bharatmala Pariyojna in Haryana. The length of the first package will be 34.00 km and is expected to cost around 1048.75 crore.The second Package includes theconstruction from Junction with Rohtak Panipat road (NH709) near Rukhi Paani village to Junction with Jind Panipat road (NH352A) near Gangana (Km 34.000 to Km 60.800) on HAM under BP. The length of this part will be 26.80 km and is expected to cost around 854.03 crore.Package 3 involves the construction from Junction with Jind-Panipat road NH352A near Gangana village to Junction with Jind Karnal road NH709A near Alewa village (Km 60.800 to Km 91.400) on HAM under BP. The length of Package 3 will be 30.6 km and the estimated cost is 911.20 crore.

– NBMCW.com

Puravankara Projects has planned to launch 5.5 mn sqft plotted development across Bangalore, Coimbatore and Chennai, apart from venturing into Pune, Hyderabad and Mumbai, under its subsidiary Purva Land. The company will focus on developing plotted development projects across the existing micro-market on its own and under the joint development model apart from expanding affordable and luxury homes projects. Ashish R Puravankara, MD of Puravankara, informed that the company has completed and delivered 40 mn sqft of the project and has around 21 mn sqft of projects under development across residential and commercial segments. The home buyers have realized the importance of owning a home now. The builder plans to launch 9mn sqft of residential assets over the next 12 months with its affordable housing arm, provident brand accounting for 82% of the launch pipeline.

– NBMCW.com

KCC & CDS secure Packages 1-3 of Delhi-Amritsar-Katra Expressway

Puravankara forays into plotted property development

8

Uralungal Labor Contract Cooperative Society has been awarded a contract to develop the 39 km road from Thalappadi to Chengala on NH-66 as a six-lane road stretch. The project, which is part of the Bharatmala Pariyojana, is being built on hybrid annuity model along withmaintenance of 15 years. This is the first time that the Uralungal Society has participated alone and won the contract of the National Highways Authority amidst tough competition, where players like Adani Group, Megha and KNR groups also participated. The Uralungal Society is the only contractor from Kerala eligible to participate alone in the tender for the National Highway Development Program, which includes projects such as the Bharatmala and the Golden Quadrilateral Super Highway.The Society got the contract for the first stretch from the state border for 1704.125

crore. The construction period in this project is two years and the estimated cost is 1,268.53 crore. Only 40 per cent of the

contractual amount will be allotted during the construction phase. The rest of the amount will be given as 30 instalments during the remaining 15 years. The contractor would have to secure 60 per cent of the construction cost and also bear the interests on its own. The tender process for 11 stretches from Thalappadi toKodungallur and three stretches from Paravur inAlappuzha district to Kadampattukonam for the six-laning project from Kasaragod toThiruvananthapuram are currently on. Of these, the tender processes of stretches from North to Kapirikkadu have been completed and the remaining will be completed soon.

– NBMCW.com

The Airports Authority of India (AAI) has floated tender for the construction of the first phase of an international airport at Dholera in Gujarat, entailing an investment of 987 crore. The new facility is being set up in greenfield city under the Delhi-Mumbai Industrial Corridor (DMIC) project. Located in the north of the Dholera Special Investment Region (DSIR), the upcoming airport aims at catering, not just to DSIR and its hinterland, but also to traffic overflow from the Ahmadabad International Airport. The new international airport, which will be aligned with a fire-station of Category-9, will

incorporate a 3,200-mts (metres) runway suitable for type 4E Aircraft. The lack of an international airport in Saurashtra and its vicinity will make the Dholera International Airport strategic and advantageous as it will be an advantage for the aerospace, defence and manufacturing industries keen to invest in the greenfield industrial smart city of Dholera. The state government has allocated 1,427 hectares of land and 75 hectares of government land will be used for commercial development.Odisha unveils 2,296-cr road networkThe Odisha Government has decided to invest 2,296 crore under the Road Development Program with a target to construct 1,000 km of roads, 30 bridges and two rail-over-bridges in the upcoming fiscal. It has also planned to build 4,000 km of rural roads under PMGSY and 2,000 crore has been allocated for it.The government has planned to develop roads under Biju Express Scheme which will act as an economic corridor for Western Odisha and financial support of 100 crore has been made for the purpose. An outlay of 912 crore is proposed under Biju Setu

Yojana, 781 crore for improvement of RD roads and bridges and 300 crore for 416 ongoing and 142 new road projects under Mukhya Mantri Sadak Yojana. While a provision of 100 crore has been made for land acquisition and development of airstrips identified under UDAN scheme, the outlay for railway projects in the State is 396 crore.

– NBMCW.com

Uralungal Society secures 1,704-cr

road contract

AAI floats tender for 987-cr Dholera airport

9

In a move to create a living and business spaces safer, beautiful and hygienic than ever Asian Granito India Limited (AGIL), one of India’s leading tiles brand has launched ‘AGL Tuffguard Anti-Bacterial Tile (TAB).’ AGL TAB tile is made with tuff guard plus anti-bacterial glazing made of Silver Ions homogenously distributed throughout the matrix that hinders the growth of bacteria and germs which comes in contact. AGL T.A.B tile has successfully tested under the protocol of JIS Z 2801:2010 Anti-Bacterial testing and is found more than 99 per cent effective. The company has launched this unique tile in the format of 600 mm X 600 mm in the Indian market and expects a good response from the export market.In addition, to be 99 per cent free from bacteria and germs, AGL TAB tile are full of features like anti-skid surfaces, stain and high abrasion resistant, scratch resistance, durable body, chemical and alkaline resistant which makes it ideal for high traffic areas of hospitals, schools, restaurant, hotels, gym, clubs, clinics, labs. In addition, AGL TAB tiles are eco friendly, keep fighting against bacteria-free 24X7 to keep surface safe, and harmless to human bodies which makes it a perfect solution for wall and floor. AGL TAB range is available in 25 plus design and matt finish.Kamlesh Patel, Chairman and Managing Director, Asian Granito India Ltd said,

“Science and aesthetics come together in our unique products. AGL has created a distinct competitive edge in the market by consistently launching innovation-led and differentiated products and our R&D team is working relentlessly to improve living space. With this new introduction of AGL Tuffguard Anti-Bacterial Tile, AGL provides solutions to create living spaces more hygienic and safer than ever. Technological capabilities to deliver high-quality products coupled with an unwavering focus on improving cost-efficiencies enable the company to maintain its competitive position in the market.”AGIL products are synonymous with reliability, a d a p t a b i l i t y , i n n o v a t i o n , q u a l i t y consciousness and the company has created a strong brand identity, well recognized globally and loyal customer following across segments. Taking the science up a notch, the c o m p a n y h a s s e t u p a c e n t ra l i s e d , ultramodern laboratory compliant with IS 15622, ISO 13006, and EN standards.Asian Granito India Ltd offers the widest range of products including, Ceramic Floor, Digital Wall, Vitrified, Parking, Porcelain, Glazed Vitrified, Outdoor, Engineered Marble & Quartz, etc. Further to leverage the synergies, the company has entered in bathware products that include Faucets and Sanitaryware to provide ‘Complete Bathroom Solutions’ under brand AGL. The company has set a target to increase its touch points and expand the network of exclusive showrooms to 500. The company expects higher sales in the coming quarters due to its dominance in B&C class cities and focused penetration in the market.

– ACE Update

KEC International has secured new orders worth 1,140 crore across business verticals including power transmission & distribution (T&D), railways and civil construction on EPC model. it had secured 963 crore T&D orders for projects in the Middle East and Africa, 113 crore railways orders for the Overhead Electrification project to speed up-gradation and 64 crore civil construction contract for the hydrocarbon segment in India. The railway business of the company continues to expand in emerging areas with its first order in the area for semi high-speed rail. The entry of civil business in the hydrocarbon segment opens up a huge opportunity for it in the segment. MD & CEO, KEC International, informed that contracts secured in the T&D business along with the domestic orders announced earlier have enhanced the order book in its core areas of operations.

- NBMCW.com

Asian Granito India launches

AGL Tuffguard Anti-Bacterial tile for

better hygiene

KEC International wins infra contracts

worth 1,140-cr

10

11

Dilip Buildcon has emerged as the L-1 bidder for two projects which include Phase 1- Package 1 and 2 of the Bangalore Chennai Expressway with a total cost of 2,439 crore.The first project involves 4-laning from km 0.000 to km 26.400 (along with 0.700km approach towards NH 207 with interchange on NH4 at the starting point) of Bangalore to Malur Section of Bangalore Chennai Expressway (Phase-I Package I) on Hybrid Annuity model under the Bharatmala Pariyojna in Karnataka. The bid project cost is 1,160 crore with a completion period of 24 months and an operation period of 15 years from COD.The second project involves theconstruction of 4 lane expressway from km 26.400 to km 53.500 of Malur to Bangarpet Section of Bangalore Chennai Expressway on Hybrid Annuity Model under the Bharatmala Pariyojna in the same state (Phase-I Package II). The bid project cost is 1,279 crore.

– NBMCW.com

The Odisha Government has decided to invest 2 ,296 crore under the Road Development Program with a target to construct 1,000 km of roads, 30 bridges and two rail-over-bridges in the upcoming fiscal. It has also planned to build 4,000 km of rural roads under PMGSY and 2,000 crore has been allocated for it.The government has planned to develop roads under Biju Express Scheme which will act as an economic corridor for Western Odisha and financial support of 100 crore has been made for the purpose. An outlay of 912 crore is proposed under Biju Setu

Yojana, 781 crore for improvement of RD roads and bridges and 300 crore for 416 ongoing and 142 new road projects under Mukhya Mantri Sadak Yojana. While a provision of 100 crore has been made for land acquisition and development of airstrips identified under UDAN scheme, the outlay for railway projects in the State is 396 crore.

– NBMCW.com

Standing firm behind i ts not ion of fascinating users through affordable solutions for a better life, Bosch Power Tools aims to enhance user convenience and experience through digital platforms and technologically advanced tools. Backed by a powerful range of cordless power tools and best-in-class after-sales service solutions, Bosch Power Tools continues its purpose of providing technologically advanced tools and affordable solutions to improve the skills and productivity of its users.In addition to addressing the on-ground requirements of its customers, Bosch Power Tools leverages digital platforms to help its customers provide the right information for its products and solutions at their fingertips. Bosch has pioneered a new QR code scanning technology called BeConnected which offers its users end-to-end product lifecycle information from the time of its purchase, besides added benefits such as an extended warranty.BeConnected, a web app provides its users with useful information like the location of dealers and service centers, product information, tutorial videos, customer reviews, information on new products, and timely reminders to service the tool.Bosch’s range of powerful corded and cordless power tools are appropriate across the entire universe of construction, m a n u f a c t u r i n g , w o o d w o r k i n g , a n d

Dilip Buildcon wins 2 HAM projects for

Bangalore Chennai Expressway

Odisha unveils 2,296-cr road network

Bosch Power Tools: Enhancing user

convenience through digital platforms

and advanced technology

12

metalworking applications with a high level of safety and convenience for its users. Bosch’s latest invention X-Lock technology will become the industry benchmark in providing safety and convenience to its users for the angle grinder range of tools. Bosch Power Tools stands true to its commitment towards consumers through its state-of-the-art manufacturing facility in Chennai which recently crossed the milestone ofmanufacturing 10 million power tools.“Over the past 26 years, with its range of power tools, Bosch has helped its users in building up India. We will continue to provide technologically advanced and innovative products, digital offerings thereby fascinating our users with affordable solutions for a better life,” said Nishant Sinha, Regional Business Director, India and SAARC regions, Bosch Power Tools. “As a manufacturing pioneer with more than two decades worth of experience, we will foster a collaborative work cul ture with h igh-performance standards to provide superior value to our customers and stakeholders.”

– ACE Update

International luxury lifestyle brand and an extension of the Trivedi Group, Arnaya, has constantly been pushing past the limitations of stone and re interpret ing modern furnishings that blur the line between function and beauty. The brand presents a portfolio of dimensional surfaces, designed by ace architect Nikita Mehta, that redefine luxury and creative excellence. Arnaya’s

Tessera, Sierra and Natura collections are designed for both interior and exterior spaces and take their cues from the varied artistry in nature.Arnaya’s Tessera Collection presents a minimalistic approach to stone tiling with a wide range of 2D tiles. With techniques of inlay and mosaic, the tiles can be used as wall and floor tiles alike. Each design is thoughtfully created, so when assembled, artistically enhance contemporary spaces. Its Sierra Collection seeks cues from the mountains and hills and juxtaposes elevation and altitudes with recesses and cavities, dramatized in 3D tiles. This collection develops a brilliant play of shadow and light is designed to be put together in a way that brings walls to life with its convexity and protuberance.The Natura Collection, inspired by the foliage, florals and flowing streams is a mix of 2D & 3D tile options, and one can choose among floating petals and the rising sun to create falling, walling or both. All collections are meticulously crafted using a range of traditional and contemporary techniques from the basic inlay, mosaic and overlay to engraving and carving, all performed with immaculate precision to offer the best in luxury finishes.Manan Trivedi, MD, Arnaya, says, “Arnaya uses state of the art technology to create revolutionary products that can maintain error-free consistency in large volumes. With materials being sourced from all over the world, Arnaya is gradually bringing nature back into urban spaces. Our use of all-natural stones from across the world and techniques that are rooted in a blend of craftsmanship and technology has enabled us to create surfaces

Arnaya brings nature back into urban

spaces with state of the art surfaces

that bring the best of nature into consumers’ homes.”“While the demand for natural stone has remained consistent, consumers are always on the lookout for novel designs that can lend an air of sophistication and luxury to their spaces . Our co l lect ions for Arnaya understand this demand for natural stone sur faces and e levate them through revolutionary technology, design and craftsmanship to create ready to use surfaces that when assembled contrive novel spaces,” says Nikita Mehta.Arnaya’s technological advancement has also led to an innovative juxtaposition of fragile coloured glass with hard marble surfaces, inlay of Mother of Pearl into artificial quartz, semi-precious stones like amethyst and malachites carved into fine Italian marbles, engendering a paradigm shift in the utilization of stones. The employment of state of the art technology like the Five Axis machine that ingeniously replicates the movement of the human hand, allows Arnaya to offer end to end manufacturing with carving and inlay resulting in exquisite pieces with consistency in volumes.Stone has always been timeless in its expression. For the first time, it’s versatility has been manoeuvred in combination with delicate material like glass, mother of pearl, semi-precious stones as inlays and carvings, jalis and trellis work, facade and interior applications.

– ACE Update

NEW TECHNOLIGIESAmeya PEB Pvt. Ltd.

13

Our main product is PRE - ENGINEERED BUILDING, we take turnkey scope i.e. DESIGN, Manufacturing and erection of steel Buildings all over india basis.Roof & Cladding SystemAmeya HI-RIB roof as well Standing Seam Roof (i.e without any puncture in roof sheet) and wall cladding system is available in the fol lowing base material in standard execution. Galvalume high tensile cold rolled steel 345/550 as per AS-1397 standard (AZ 150 gsm/m²) Zinc-Aluminum alloy coating mass, total of both sides, 550/345 Mpa yield strength conforming to AS-1397. Roof Sheeting is 0.47 mm thick Hi Rib Bare Galvalume and also with higher thicknesses depending upon project specific ,Wall Cladding is 0.50mm thick Hi Rib Colored coated Galvalume

1. HIGH RIBOur High rib bare galvalume sheeting is well suited available roofing solution for all Industrial building. This High rib profiles are with 0.47mm thick high rib bare galvalume and of —— gauges. These are single skin panels are fixed on Roof with SDS (Self Drilling screws).This high rib sheeting can be profiled with variable depths and sizes. 2. LOW RIBOur Low rib profiles are with ——— mm rib and of ———– gauges It is available in variety of colours and contains minimally visible stitching screws, which makes it more suitable to fix on wall. These are single skin panel which maximizes the potential of steel frames to support the building and cover the structure.

3. DECKING SHEET PROFILEAmeya Group offer deck section in galvanised, galvalum and posmac (25 yrs corrosion guarantee)

4. STANDING SEAM PROFILEFor wide width more 75m or low slope standing seam sheeting system are widely used. This is a non piercing roofing where every seam is 360 degree seamed.This is a perfect system for leakage proof building. Ameya Group owns standing seam machine, standardized tested systems and specialized team for perfect execution of standing seam profile. Each and every accessories have been developed and tested by Ritesh Bhandari for leakage proof systems.

Sharma PEB Steel Structures Private Limited

Our Products list:

1. Industrial Sheds

2. Factory Sheds

3. Commercial Sheds

4. Industrial Warehouse

5. Agricultural Warehouse

6. Civil Construction

7. Steel Construction

8. PEB Steel Structures

9. Pre Engineered Buildings

10. PEB Solutions

11. Poltry Farm

12. Heavy PEB Steel Structures Building

13. PEB Automobiles Showroom

14. All Types Buildings Manufacturer

15. Paver Blocks

16. Pole Light/Yard Light

17. Solar System

18. PEB Raw Materials Manufacturer

19. Cold Storage Manufacturer

20. All Types Petrol Pumps Manufacturer

21. PEB Steel Projects

22. PEB Steel Government Projects

23. Grain Storage PEB Steel Structures Sheds

24. Rice Mill

25. PEB Steel Structures Construction

26. PEB Mezzanine Floor Buildings

14

15

There are many different ways of benefitting from

the Roofindia exhibition.

You can increase your company's exposure by

becoming a Partner of the show, advertising in

the exhibition's promotional materials, or simply

visiting the show and gaining first-hand

information about the new developments in the

market and latest technology advancements.

Branding gives an excellent opportunity to stand

out from the crowd, reinforce, enhance and

establish corporate visibility amongst the

targeted audience. Branding is a great way to

reinforce your brand message with benefits

including:

1. Enhance your leadership status

2. Educate and inspire a targeted audience with

your products and services

3. Raise brand awareness and create preference

to a targeted audience

4. Build leadership status in the industry

5. Create positive PR and raise awareness of the

organisation as a whole

6. Build brand positioning through associative

imagery

7. Create internal emotional commitment to the

brand

8. Provide innovative solutions to the industry

9. Provide revenue generating ideas

PARTNERSHIP OPPORTUNITY

16

Lighting is an essential component for every successful home design scheme. Lighting fixtures play a great deal in thetransformation of the design and feel of homes and commercial spaces, a light for example is not just a light but also a piece of art. Almost every fixture has a role to play in influencing the end result of the aesthetic layout with the added function of providing a sensory experience.With the ability to impact the mood of a room, or bring out the architectural beauty of a façade, lighting is a key element to consider when designing a space. Lighting can transform the shape and size of a room or a building. When lighting for a home, the purpose of each room comes into play. The kitchen, a workspace, demands brighter, high CRI (colour accurate) light while the living

room calls for more mellow, warmer lighting. Table lamps to ceiling lights are today the focus of rooms as opposed to being merely functional.Depending on one’s personal tastes light fixtures are reflective of style, vision and mood. Thoughtfully placed, cleverly designed and carefully crafted lights transform rooms and dial in several other design elements. The art and concept of lighting has come a long way. With continued research and innovation, homeowners and designers have a wide variety of options today.Internet of ThingsSmart lighting fixtures are increasingly becoming the most adopted and widely requested among the latest trends for both home and commercial purposes. We’re living in the age of smart lighting which plays a crucial role in lighting up spaces. With various applications and features to control, even remotely, the transition towards a smart light upgrade is higher now than ever. Some of the technology on offer also has the ability to connect with your GPS location, so your home lights up as soon as you are about to arrive.With Jaquar Lighting it is our continued focus and effort to introduce innovative, smart lighting focusing on a holistic solution. We ensure that our smart lighting products are not only easy to use but high on thefunct ional i ty, qual i ty, durabi l i ty and sustainability scale.Nature-inspired and nature-consciousC o n s u m e r s a r e m o r e d e s i g n a n d sustainability conscious. Lighting pieces that have a mix of metal with soft natural

materials like wood fibres and soft cotton are increasingly taking centre stage especially in standing fixtures and on sconces. This creates an ambience of warmth and brings the décor closer to nature – especially in spaces that have an inside-outside concept or ones which lean heavily on sustainability of design.Cleaner linesLight fixtures that speak to the industrial tone or art-deco pieces are making a huge comeback still but with cleaner modern designs. These pieces are especially sought as centrepieces that define a functional space – for example over the dining table or as installations in stairways. These fixtures boast simple geometric designs, clean lines, neutral soft colours and prominence of form over ornate aesthetics.LED- accentsIncandescent bulbs might be available cheaply in the market, but in the long run, prove to be extremely wasteful and unflattering to modern-day designs. With LEDs becoming cheaper, a myriad of LED strips and hidden lighting solutions help accentuate dark corners or heavy built-in storage units around the house. We now see a trend of highlighting overhead cabinets in the kitchen and mirrors in the bathroom with LED accents to add warmth and a soft glow to each of these spaces for occasions where consumers do not need the brighter lighting unit in these spaces to be turned on.

– ACE Update

MEDIA SPEAK

Holistic lighting: Trends to follow in the

design & décor space

17

18

In ongoing construction of buildings and complexes as also the completed projects, energy efficiency is a core issue. It directly amounts to the cost incurred during the ongoing construction apart from which it also determines the energy costs once it is in use. In addition. In contemporary times energy efficiency also amounts to the use of specific products and technologies in construction, buildings, office complexes etc. which can pass on the benefits to the environment and make way for a greener world, something that we all want. Moreover, as cities grow and newer cities are incepted the consumption of energy is always on the rise. Hence as we take steps forward towards becoming a developed nation, energy efficiency will also be one of the prime factors which will govern the sustainable existence of our contemporary eco-system.

Structures and Energy EfficiencyWhen it comes to building design, earlier land was available for horizontal expansion. But with time and space constraints a ninety-degree overhaul happened, and vertical high rises became a reality. Unlike the previous load bearing structures, the high-rises ushered in framed structures. Dhruv Sarveshwar Lal, Founder and Principal Architect of Dhruv Sarveshwar Lal and Associates/Design Equilibrium says “I do think that we are heading towards buildings which are going to be multiple floors of multiple levels. So sooner or later we have to engage in a technology system where we have to reduce the footprint that we have, of the building, on the ground. This in turn will make the building energy efficient. If we are to attain this, we have to do away with load bearing construction.Importance of site and building form in energy efficiencySaurabh Goenka, Senior Associate, S9 Architecture points out the importance of site selection and building form in energy efficiency “Site selection is one of the first things to consider because an aptly located bu i ld ing can s imul taneously tack le ecological impact, connectivity, orientation, energy efficiency and therefore, costs. Selecting a site that promotes urban infill and adaptive reuse encourages the use of existing infrastructure and utilities. Proximity to public transportation furthers walkability and reduces transportation distances, which in turn decreases the overall energy consumption. The building form is a crucial

factor that determines the overall energy loss or gain.A direct relationship exists between the shape and energy efficiency of a building. In one of the project I executed in New York, I used a weaving façade, it offers a beautiful static composition while adding a three-dimensional aspect to the building grid and also provides a window shading thus reducing the building’s energy utilization. High-rise buildings designed with green atriums incorporated into the form can double up as outdoor public spaces while improving the building’s energy efficiency.Using alternative materialsMaterials utilized in construction have a say on the level of energy efficiency which can be attained, so it is necessary to make a wise choice when it comes to selection of materials. Ritin Gulati , Founder and Principal Architect of Ritin Gulati and Associates points out “In construction, we tend to use a lot of steel, which needs to be r e p l a c e d w i t h n e w m a t e r i a l s a n d technologies, for example, I use AAC blocks in my projects. These blocks are very lightweight concrete blocks, so unlike bricks, it reduces the amount of dead load thereby leading to a decrease in the use of steel required. In a similar vein a lot of the pro jects being designed today are prefabricated, leading to an increase in prefab homes and allied infrastructure. This is invariably saving a lot of time, space and material.When we talk about the use of alternative materials, it is necessary to ensure they are

A review on energy efficiency in Indian

construction

19

The ‘Power of Ten’ which led me to become an architectI believe that good design is something that is based around tradition and culture and yet it never gets old. Rather, the most important element would be something that feels new and towards the future. When I was in high school, I saw a short science film called “Powers of Ten” by Charles and Ray Eames who worked on various projects in the field of furniture, products, architecture, and movies etc. and that led me to want to become an architect. The fact that they cal led themselves architects whi le practicing their creative prowess across various fields with different viewpoints made me admire them.Initial SuccessMy first project was SEVEN (7 tsubo= about 23m2 small house built in a city). It has something in common with Tadao Ando’s small city house, “Row House of Sumiyoshi”. It truly gave me a lot of happiness when SEVEN was published in a book, furthermore the editor conveyed to me the words of encouragement Mr Ando himself had for me and that is something I would never forget. SEVEN, a city house (7 tsubo, 5 story-house) was also the first project I designed after the inception of my firm.The viral effectSEVEN was published in more than 100 media (both in architectural and non architectural ones). After that, I worked on mostly city houses for several years. SEVEN in a way embodied the ambition of people in

used responsibly. Niraj Doshi, Founder & Principal Architect of Niraj Doshi Design Consultancy says “Today, a lot of people are experimenting with wood. It is fast becoming one of the preferred choices under the sustainable materials category, so much so more that even in Northern Europe it is witnessing a resurrection of sorts, materially. Wood is a good material, the embodied energy of wood is less than steel, concrete or RCC structures, but only if it is utilized in a responsible way. We all know how excess use of wood can lead to deforestation and its impact on climate change and of course the entire ecosystem.”Attaining energy efficiency through CFD AnalysisAkhil Ganatra, Founder and Managing Director of Clancy Global believes energy modelling and CFD analysis can ensure our built environment is energy efficient, he points out “it is necessary to make energy modeling and CFD analysis compulsory across all projects, as they account for 30% greenhouse emissions. That apart the energy sector alone accounts for 60% of the greenhouse emissions. So, it is necessary for one to address the issues pertaining to air conditioning and embodied energy (which has a lot to do with the materials being utilized and its origin). It does not stop here alone; we have to key in the factor of sustainability as well. We also have to consider the resultant ‘quality of life’ in the offing as also and how it entails efficiency in the lives of us humans.”

As we proceed towards the next millennium innovations will be on the rise. The construction and building activity being one of the most fundamental activity of the humankind is already witnessing it. As stakeholders of the human civilization, we have to ensure that sustainability and energy efficiency in this entire manoeuvre becomes a function of finding precise resolutions and not greed.

– ACE Update

Architecture is a confluence of infinity

20

20s and 30s who want a house in a city. Client needs and creativityArchitecture consists of clients’ needs but at the same time its connection as also impact on the society and environment needs to be closely looked at. I don’t just take in clients’ needs into consideration as they are. I always analyze its impact on the society and the surrounding environment and question “Why”. After reinterpreting with a deeper understanding, I finally suggest a project concept. The important part for me then is to explain the concept to them in the most simple way until they truly understand.Reform by DesignFor me different projects pose different kinds of challenges. Challenges for me are opportunities which define the limits of creative expression, so in a way these challenges are good omen which lets me, as a professional, address the difficulty and come up with a design resolution.Material of choiceI have been using the material and structure of reinforced concrete. Exposed concrete, especially has significantly evolved in the area of quality management, form work

presentations for plant facilities and architectural sites. After establishing my own firm, in several projects I have used reinforced concrete, having said that I’m also interested in utilising new materials and technologies which might play a big role in new age architecture and design.Architecture is a confluence of infinityIn addition to “Strength, Function, and Beauty”, as advocated by Roman architect, Marcus Vitruvius Pollio, “Sustainability” including energy and ecology is crucial to architecture in coming years. As architects we have to use the design tools at our disposal to not just build but create an ecosystem where we can exists in harmony with nature and the humankind My recent projectsMy latest work ORTHO embodied “Strength, Function, and Beauty” in balance. Under COVID19 situation, the needs for “Public residence” which has elements of office, hotel, or gallery within “private residence” grew as clients’ requests. This ranch-style home is located in a quiet suburban neighborhood in the Kanto region. The design of Ortho makes use of the distinctive shape of the property and topography.Japanese Craftsmanship – The weapon of choiceDespite its size (whether big or small), craftsmanship of detailed work inarchitecture is one of the biggestcharacteristics of Japanese architecture. It is a weapon and clients from all over the world are constantly seeking it. This never changes.

– ACE Update

Business Connect Program

Market News & Views, a weekly e news alert

program covering Industry Updates , Launch of

New Technologies , Partnership Opportunities ,

Industry Views, CSR activities

International Business Networking Program

(IBNP) a monthly webinar covering key industry

across Indian as well as some neighboring

countries including China, Taiwan, Bangladesh, etc

Open Seminars during the event, a unique

opportunity to have face to face interaction with

industry leader and knowledge transfer

Contact Us

India is the 2nd fastest growing major economy in

the world and inspite of the global economic

scenario, the Building Construction & Infrastructure

industry in India continues to boom.

ROOF INDIA, India’s only focused Roofing and

Allied Products event showcasing latest in

products, services & trends from Roofing Systems,

Architectural Cladding, Pre-engineered/ Factory

Buildings, Metal Building Systems, Structural Steel,

Light Steel Framing Technology, Roll Forming

Machiner y, Spacef rames , Tens i le Fabr ic

Architecture, Roof Waterproofing, Roof Insulation,

Roofing Fasteners, Tools & Accessories for Roofing,

Industrial Doors, Industrial Flooring, Software for

Structural Steel / Roofing etc.

And it is this scenario that ROOF INDIA Exhibition -

Asia's Largest Roofing & Allied Products Event,

provides the ideal platform for the building

construction and infrastructure industry fraternity

to converge, network and strike lucrative business

deals and establish business partnerships & joint

ventures.

Roof India 2021 is planned with a Concurrent

Event: Floor India 2021, to provide an enhanced

platform for Industrial & Commercial Flooring

Solutions along with Cleaning and Installation

Technology. The exhibit profile includes

Waterborne Polyurethane Flooring, Epoxy Resin

Flooring, Pigments for Flooring, Wear Resistant

Non-Metal Flooring, Steel Fiber Reinforced

Concrete Flooring, Laminate Wood Flooring

Engineered Hard Wood Flooring, Modular Carpet

Tiles, Floor Machinery, Floor Shot Blasting

Machine, Grouts & Silicones

The concurrent Open seminars on “Let’s Talk

Roofing” and “Flooring Ideas“ will provide

additional opportunities to get the first-hand

knowledge about the latest innovation in Roofing

and flooring industries

Asia's Most Definitive Expo for Roofing & Allied Products!

th19 Edition

Roof India Exhibition, April 28-30, 2021,

Bombay Exhibition Center, Mumbai, India

Hyve India Private Limited

(CIN. U92490DL2004PTC124343)

Innov8, 2nd Floor, 44, Regal Building

(Above Madame Tussauds Wax Museum)

Outer Circle, Connaught Place, New Delhi-110001, INDIA

Email: ed.india@hyve.group

Website: india.hyve.group, www.hyve.group

21

SOME LEADING COMPANIES

AT THE EVENTAmeya PEB Pvt. Ltd.

Winntra PEB & Roofing Systems Private Limited

22

Ameya Associates LLP started in 2013 as a consulting agency and extended its services to get

registered as a Manufacturer in 2015 to cater steel construction projects, Turnkey Projects & Infrastructure construction company. We further extended our services with AMEYA PEB PVT LTD from 2019. Having manufacturing unit at Pune Chakan for Fabrication of Steel Structures (PEB), Water Tanks & Dairy Farm Related Infrastructure. We are a company with concept to commissioning policy wherein we take complete IN HOUSE responsibility of: Design & Development, Manufacturing, Assembly & Commissioning of Steel Buildings at respect site all over INDIA.We have the flexibil ity to tai lor our production to meet the needs of our clients. Our experienced and expertise also allows us to work closely with our clients from the design stage of projects until final dispatch to site.There is still a void of giving value of money services.Ameya has the vision to fill the void and create a new segment in PEB industry where every KG is consumed with full engineering and experienced services. We focus on best suited product for customer requirement.Ameya PEB PVT. LTD. is set to make its own

space in innovative products,innovative services and high-speed execution with validation services to check errors.

Introduction:Winntra Pre-Engineered Building & Roofing Systems is catering to the Indian

Market in providing best quality profiled roofing , Ceiling and Pre-Engineered Building System for the past six years.We are associated with Kamdhenu group as authorized manufacturer of Kamdhenu Peb and kamdhenu colour max roofing sheets. We offer Hi-Rib and Clip-lock profiles under the brand name of Winntra Pre-Fab Building System. The demand in the market and due to our services and goodwill in the market, we have a never ending expansion program to increase our production capacity by incorporating latest technology, Hi speed machinery to yield high quality and precise products.Company Profile:Winntra Peb & Roofing Systems Pvt. Ltd. is an establ ished company with vast exper ience in the industry.We are associated with Kamdhenu group as authorized manufacturer of Kamdhenu Peb and kamdhenu colour max roofing sheets. We take pride in the recognition of our organization. We have been providing our clients with reliable solutions to their most complex construction challenges. Today, we are recognized as a leader in the industry for our strength in traditional construction methods and for our creative, f r e s h a p p r o a c h t o c u t t i n g - e d g e technologies and delivery systems. Our expertise spans the construction industry

23

M&B Engineering Ltd. has a number of engineering and construction projects to its credit. Based in Ahmedabad,

Gujarat, the Company has diversified its services into divisions like Proflex, Phenix Construction Technologies and Phenix Infra. The Self Supported Steel Roofing solutions from the company include industrial roofing, warehouse roofing, corrugated steel roofing panels and more. Over the years, the Company has gained recognition in the fields such as industrial buildings, pre-engineered steel buildings, complex structural steel components and galvanized steel roofing. Employing more than 1,500 professionals and workers, the Company is continuously expanding its reach across India and overseas.

Proflex, a division of M&B Engineering Ltd. and promoted by the M&B Group, has revolutionized the roofing industry with its path breaking “Self Supported Steel Roofing” solution. Established in 2001, the leading roof company is a pioneer of Self Supported Steel Roofing in India. This arch roofing system, first invented and introduced in America, is proven and being utilized in over 60 countries for the last 40 years.Over the last 15 years as a leading metal roofing fabricator, Proflex has successfully executed over 5000 projects across India, which are designed to perfection and built to last. Patronage of its pan-India clients that includes Indian Conglomerates, MNCs and business owners has made Proflex an acknowledged leader in the industry; making it name synonymous with the Self Supported Steel Roofing and Galvalume sheet roofing in India, with over 75% market share. Today, Proflex is most preferred partner of choice for clients and organizations across varied industries such as engineering, warehousing, r ice mil ls , texti le , food & beverages, pharmaceutical, cement, railways, plastics, sugar factories, packaging and many more.Proflex is the only metal roofing company in India to offer comprehensive Self Supported Roofing solutions, including conceptual sketches, authentic and original American technology, structural load reactions data and project management support. All of its state-of-the-art equipments are of American make and only Proflex has its own fleet of hydraulic telescopic cranes for erection of industrial roofing.

spectrum, from smaller renovations to multi-million dollar projects. We believe in long standing relationships that have established through the years with our clients & so being called upon for new projects again, shows the confidence & reliability of Winntra Peb & Roofing Systems Pvt. Ltd.WHAT WE OFFER: DOUBLE STORY BUILDINGS MEZZANINE FLOORING SYSTEM BUILDING STRENGTHENING SYSTEM LGSF BUILDINGS WAREHOUSING CRANE BUILDINGS

M & B Engineering / Proflex

Aerolam Insulations Pvt Ltd

The AEROLAM Group of Companies compr ises leading professionals, high quality and precisely

designed products, through high-end engineering and advanced R&D.

Aerolam Promoters with their humble team had a vision, which successfully culminated in the inception of Aerolam Insulations Pvt Ltd in 2011. A purposeful market research with a clear and focused approach to understanding the need for insulation products has been a crucial factor in their growth. With a clear sense of the global climatic conditions, technical expertise and business acumen Team Aerolam sensed the scope of opportunity which led to future business recognition & accolades.Their firm belief in manufacturing and the ownership of a brand was further nurtured and leveraged across a range of products and categories. Beginning with Reflective Insulation Material, Aerolam and RIM are now synonymous with each other. In a short span of 8 years the geographical markets

and the client base have both covered some of the major countries of the world, top corporations, business houses and large contracting firms and have reached an enviable number.

Consistent and a focused attitude to manufacture only the highest quality product ( with best product efficacy), marketing through the right channels, creating a robust sales network across the value chain, participation at relevant trade shows and own personal goodwill built, has all enabled Aerolam to reach heights of success and growth.A solid determination and positive intent has made Aerolam the most sought after and trusted brand and this fact is well leveraged through new products coupled with new insight into the market needs. A plethora of new products are constantly developed that cater to applications across multiple industries. This in particular has brought in new machines, new technology, international consultants, industry experts as part of the internal corporate team and a more aggressive vision to percolate into multiple applications.

Their need to manufacture and market products which are unique & challenging has taken them a notch higher in the industry. They are pioneers in the Double Bubble Insulation – Reflective insulation in the Indian market. They installed the first machine in the world to manufacture double bubble – bubble guard which can manufacture upto 6000 GSM. Team Aerolam have also roped in the right partners on-board in order to facilitate the goal as well as to be a part of the growth at the onset itself.Team Aerolam have also roped in the right partners on-board in order to facilitate the goal as well as to be a part of the growth at the onset itself.Aerolam today in real sense is a multifaceted Organization with manufacturing prowess in Reflective Insulation Material, XLPE (Expanded Crosslinked Polyethylene Foam) Insulation Material, FIBC (PP Woven Jumbo Bags), PP Bubble Guard Board (a board with endless applications and seamless possibilities) & CPP Film (Especially for Medical & Food grade Packaging).

24

...and many more25

...and many more26

USE FACE MASK CLEAN AND DISINFECT WASH YOUR HANDSFREQUENTLY

KEEP DISTANCE FROM OTHERS

AVOID TOUCHINGEYES, NOSE OR MOUTH

STAY AT HOMEWHEN YOU ARE SICK

COMBATING Basic

Protective

Measures