dlink dir-803 router

Upload: najmul-puda-pappadam

Post on 02-Mar-2018

217 views

Category:

Documents


0 download

TRANSCRIPT

  • 7/26/2019 Dlink Dir-803 Router

    1/6

    1

    Manual Configuration Guide

    - DLINK DIR-803 Router -

    Manual Configuration Guide

    DLINK DIR-803 Router

  • 7/26/2019 Dlink Dir-803 Router

    2/6

    2

    Table of Contents

    1. Introduction...................................................................................................... 3

    2. Internet Account Configuration.......................................................................... 3

    3. Wireless SSID / (Wi-Fi) Configuration................................................................. 4

    3.1 Wireless LAN Setup for 5 GHz Band............................................................ 4

    3.2 Wireless LAN Setup for 2.4 GHz Band......................................................... 5

    4. Configuring Admin Account on the Router......................................................... 5

    5. Status of HSI Service on the Router.................................................................... 6

  • 7/26/2019 Dlink Dir-803 Router

    3/6

  • 7/26/2019 Dlink Dir-803 Router

    4/6

    4

    i. Wait for 20 Seconds to Apply the chancessuccessfully on the router.

    Please do not turn off OR reboot the device during this time.

    3.

    Wireless SSID / (Wi-Fi) Configuration

    D-LINK DIR 803 is a dual band Concurrent Wi-Fi ac router. Hence the router can

    operate in two different bands namely 2.4GHz & 5GHz simultaneously.

    3.1 Wireless LAN Setup for 5 GHz Band

    a. Click on theWirelessfolder Icon, navigate toWlan1 (5GHz)and select

    Security.

    b. From theSecurity Settings, Set the encryption as WEPand an Encryption key

    consisting of 10 digits.

    c. Apply changesto save the configuration.

  • 7/26/2019 Dlink Dir-803 Router

    5/6

    5

    3.2 Wireless LAN Setup for 2.4 GHz Band

    a. Click on the Wirelessfolder Icon, navigate to Wlan2 (2.4GHz)and select

    Security.

    b.

    From the SecuritySettings, Set the encryption as WEPand an Encryption keyconsisting of 10 digits.

    c. Apply changesto save the configuration.

    4.

    Configuring Admin Account on the Router

    Click on Management and proceed to Password Menu on the Router

    a. Type username as admin

    b. New Password as per Customer Choice and confirm the new password again

    c. Apply the Changeson the Router

  • 7/26/2019 Dlink Dir-803 Router

    6/6

    6

    5.

    Status of HSI Service on the Router

    Click on Managementand select Statusto verify Service Status as per the screenshot

    below: