dl4000 september 2009
DESCRIPTION
DL4000 Catalog September 2009TRANSCRIPT
Video Over Fiber Optic Transport Systems Since 1981
Modular Video Transport SystemSeptember 2009
DL4000
www.artel.com | 978-263-5775 | [email protected] | [email protected]
When the world is watching, you can depend on Artel
Table of Contents
DL4000 Small Footprint Video Transport System
DL4000 Video Transport System Overview 3
DL4000 Function Module Overview 5
DLC100 Multi–Rate, Multi–Function Digital Video Transport Module 6
DLC100T DWDM Optical Multi-Rate Video Transmitter Module 8
DLC150E SDI/SDTI 4 Channel Analog/Digital AES Audio Embed 10and Transport Module
DLC170AD Composite Video (NTSC/PAL) and Analog Audio 12 to SDI Conversion with Optical Transport Module
DLC170DA SDI to Composite Video (NTSC/PAL) and 14 Analog Audio Conversion with Optical Transport Module
DLC200 10/100/1000Mb/s Ethernet Transport Module 16
DLC270 Multi-Rate Digital Transmitter w/Composite Video 18 NTSC/PAL) and Analog Audio to SDI Conversion Module
DLC274 270Mb/s Digital Video 4-to-1 20 TDM Multiplexer/De-multiplexer Module
DLC300 3G-SDI Multi-Rate Digital Video 22 Transmitter/Receiver/Repeater Module
DLC710 Multi-Function Digital Video Generator and Test Module 24
Optical Multiplexers DWDM, CWDM and WDM Modules 26
Small Form-Factor Pluggable (SFP) Optics Overview 28
DL-Manager™ Element Management System (EMS) 30
DLM130 DL-Manager EMS Module with Power Supply 31
DLM010 and DLM020 Contact Alarm Modules 32
Accessories 33
Since 1981 Artel Video Systems
has been an industry leading developer of
carrier class, broadcast quality video over
fiber-optic transport hardware. Our products
reliably deliver video, audio, and data in
real time, meeting the most demanding
requirements for 24/7/365 operation in
harsh environments.
Artel products are some of the most widely
deployed video transport platforms in
history, placing us at the heart of video
transport networks worldwide.
DL4000Catalog_09-08-24
DL4000
• Optical Transport of Video and Ethernet
• WDM, CWDM, DWDM Optical Multiplexers
• Video Format Conversion
• Video Signal Generators
• Video Test and Verification
When the world is watching, you can depend on Artel
www.artel.com | 978-263-5775 | [email protected] | [email protected]
In addition to the base DL4000 chassis, also available are the DL4042, DL4000P,
and DL4100. These chassis increase both the flexibility and cost effectiveness of the
platform. The DL4042 is a four slot chassis, sharing the dimensions of the DL4000 but
with dual internal AC power supplies. The DL4100 is a compact unit that holds a single
DL4000 based module, and the DL4000P is a passive 4 slot chassis designed to house
DL4000 based WDM, CWDM, and DWDM optical multiplexers.
FeaturesDL4000 Chassis Features• Spaceefficientrugged1RUchassis• Fourhot-swappablefunctionmodules• Dualhot-swappablepowersupplies • AC, DC, or dual (one of each)• Dualcoolingfans• Unlimitednonspacedinstallation• Dependablepassivebackplane• Highspeedinterconnectbetween function modules, up to 72 Gb/s
• NEBSLevel3certifiedRemote Management of Chassis and Modulesvia DL-Manager
• Noexternalsoftwarerequired• HTTPorSNMPv2• Monitor• Configure• UpgradefirmwareModule Features• Ruggedizedsinglepiece• Frontpanelmonitoringofvideoand system status • Hot-swappable • Broadcastsvideotoother modules in chassis• NEBSLevel3certifiedSupported Formats• 2.967Gb/s(SMPTE424M)• 1.485Gb/sHD-SDI(SMPTE292M)• 270Mb/s(SingleorfourChannelTDM) • SD-SDI(SMPTE259M-C,ITU656) • SDTI (SMPTE 305M) • DVB-ASI • Artel 270• 19.39Mb/sATSC(SMPTE310M)• 10/100/1000EthernetOptics• ExternallyaccessibleSFP (Small Form-Factor Pluggable)
• Longrangeopticsupto37dBlinkbudget• Availableinindustrystandardwavelengths • WDM (1310nm, 1550nm) • CWDM(ITUG.694.2) • DWDM(ITUG.694.1)
Video Transport System Overview
The DL4000 Digital Video Transport System is a new generation of universal video
transport leveraging Artel’s more than 25 years of carrier class video transmission
experience. A small, rugged modular chassis, the DL4000 combines the space
efficiencyofa1RUchassiswiththeflexibilityofmulti-modulesystems.
Dual hot-swappable AC or DC power supplies
Side to rear cooling for unspaced stacking
Four hot-swappable function modules
DL4000
33
The DL4000 was designed from the ground
up to be a video transport platform.
Features such as multi-purpose, single
piece function modules, compact rugge-
dizedonerackunitchassis,acommonset
of external SFP optics, front panel acces-
sible status LEDs and monitoring for each
moduleareuniquetotheDL4000andare
ideal for video transport applications. In
addition,apassivebackplanewithinternal
module to module interconnectivity and
aNEBSLevel3certifieddesignmakethe
DL4000 the most rugged and dependable
video transport platform ever developed.
Mo
du
leFu
nct
ion
Rev
0_0
9-0
8-2
4
www.artel.com | 978-263-5775 | [email protected] | [email protected]
When the world is watching, you can depend on Artel
Ordering Information
Chassis Model DL4000 DL4042 DL4000P DL4100
Part # 390-008000-00 390-008001-00 390-008750-00 390-001000-00
Number of Function Module Slots
4 4 4 (Passive only) 1
Power Supplies1 or 2 AC, DC or one of each
(HotSwappable)2 Internal AC
(Non-Removable)None 1 AC External
CoolingActive
(1 Fan per power supply)Active
(2 Fans)N/A Convection
Chassis Dimensions (h, w, d) 1.75” x 17.0” x 10.5” .83” x 5.88” x 10.5”
Chassis Wt. (Fully Populated) <10 lbs. <3 lbs.
Mounting Options
19inchrackunit Std Std Std Option
Table Std Std Std Std
Wall Std Std Std Option
Operating Temperature 0 to 50°C 0 to 40°C
RelativeHumidity 10 to 95% (non-condensing)
Ambient Storage -40 to 80°C
Module to Module Internal Communication Yes No No No
Remote Monitoring and Man-agement via DL-Manager Yes No No No
Regulatory Conformance
NEBSLevel3Certification Yes No No No
NEBSLevel3Compliance Yes Yes Yes No
CSA 60950, EN60950, EN55022, FCC Part 15 (Class A), CISPR 22 Yes Yes Yes Yes
Power Supply Specifications
Chassis Model DL4000 DL4042 DL4100
DC Power Supply AC Power Supply Dual Internal AC External AC
Power Supply Model DLP002 DLP001 Internal DLPE001
Part # 390-008005-00 390-008002-00 390-001002-00
Input Voltage -40 to -70 VDC 90to254VACat50or60Hz
Power Consumption (Max) 60 Watts (per chassis) 15 Watts
Current (Max) 1.5 Amp 1 Amps .25 Amps
BTU/hr(Max) 205 (per chassis) 55
DL4000P
Chassis Specifications
DLC
has
sisR
ev1_
09-0
8-0
6
DL4100
DL4000
DL4000P
DL4042
4
DL4000 System
Optical TransportDLC Module 100 100T 150E 170AD 170DA 200 270 274M 274D 300 710 Comments
Single Channel 100 100T 150E 170AD 170DA 200 270 274M 274D 300 710
Composite Analog P P P
ATSC P P P P P
DVB-ASI P P P P P P P P
SD-SDI P P P P P P P P* * Native, Dithered or Scrambled Signal
SDTI P P P P P P P P
HD-SDI P P P P P* * Native, Dithered or Scrambled Signal
3G-SDI P* * Native, Dithered or Scrambled Signal
10/100/1000 Ethernet P
Multi-Channel 100 100T 150E 170AD 170DA 200 270 274M 274D 300 710
Composite Analog P* P* P* P P *UsedinconjunctionwithDLC274
DVB-ASI P P
SD-SDI P P
SDTI P P
Optical Function 100 100T 150E 170AD 170DA 200 270 274M 274D 300 710
Transmitter P P P P P P P P
Receiver P P P P P
Repeater P P P P P
Transceiver P
Dual Transmitter P
Dual Receiver P* * Automatic switchover on loss of signal
Dual Repeater P* * Automatic switchover on loss of signal
Repeater Compatibility 100 100T 150E 170AD 170DA 200 270 274M 274D 300 710
DLC100 P P P P P P P P P* * Excludes 3G-SDI Mode
DLC200 P
DLC300 P P P P P P P P P
Other FunctionsDLC Module 100 100T 150E 170AD 170DA 200 270 274M 274D 300 710 Comments
Format Conversion 100 100T 150E 170AD 170DA 200 270 274M 274D 300 710
Audio Embed into SDI P P P
Audio De-Embed from SDI P
Composite Analog to SDI P P
SDI to Composite Analog P
ATSC to DVB-ASI P* * In Transmit or Receive Mode
Test/Standby Generator 100 100T 150E 170AD 170DA 200 270 274M 274D 300 710
Composite Analog P P
ATSC P
DVB-ASI P
SD-SDI P P
HD-SDI P P
3G-SDI P P
Signal Test & Verification 100 100T 150E 170AD 170DA 200 270 274M 274D 300 710
ATSC P
DVB-ASI P
SD-SDI P
HD-SDI P
3G-SDI P
DL4000 Function Module Capabilities
Mo
du
leFu
nct
ion
Rev
0_0
9-0
8-1
2
55
www.artel.com | 978-263-5775 | [email protected] | [email protected]
When the world is watching, you can depend on Artel
TheDLC100isuniqueinthatonecardcanfunctionasatransmitter,receiver,
transceiver for bi-directional application or a repeater. This reduces inventory cost
andsimplifiesdeployment.TheDLC100provides4bi-directionalmulti-ratecircuitsin
asinglerackunit.
For additional flexibility the DLC100 uses industry standard 1310nm, 1550nm, and CWDM
Small Form-Factor Pluggable (SFP) optics. Provisioning and monitoring is accomplished
usingswitches,LEDs,dualfrontandbackmonitorjacks,SNMPorHTTPviaDL-Manager.
FeaturesSingle Card Configurable as:• Transmit(electricaltooptical)
• Receive(opticaltoelectrical)
• Bi-directional(independenttransmit and receive)
• Repeat/Regenerate(opticaltooptical)
Automatic rate selection
Supports all digital formats• 1.485Gb/sHD-SDI(SMPTE292M)
• 270Mb/s
• SD-SDI(SMPTE259M-C,ITU656)
• SDTI (SMPTE 305M)
• DVB-ASI
• Artel 270
• 19.39Mb/sATSC(SMPTE310M)
• Internalswitchselectableratelockout
Interoperates with• DigiLink1220/2701
• OtherDL4000Modules
• NonDithered/NonScrambledOptical Transmitters and Receivers
• ITU694.2OpticalMultiplexers
Inputs/Outputs• OpticalviaSFPs1310nm,1550nm and CWDM
• Electricalinput(1)andoutputs(3) via 75ohmΩBNC• Inputfromandoutputtoothermodules inDL4000Chassis(viabackplane)
Multiple monitor options• Frontpanelmonitorselectablebetween optical input and optical output (Mini75ohmSMB)
• Rearpanelmonitorofelectricalinput
• FrontandrearpanelstatusLEDs
Remote Management via DL-Manager • Noexternalsoftwarerequired• HTTPorSNMPv2• Monitor• Configure• Upgradefirmware
Multi-Rate, Multi-Function Digital Video Transport Module
TheDLC100isaflexible,bi-directionalfiberoptictransportmoduleforalldigital
video formats from 19.39Mb/s to 1.485Gb/s. The DLC100 supports all digital
formatsincludingcompressedanduncompressedHDTV,SDIandDVB-ASI.
DL4000 VIDeO TRAnSpORT SYSTeM
Chassis Slot #1
Chassis Slot #2
Chassis Slot #3
Chassis Slot #4
Digital VideoElectrical (IN)
Digital VideoOptical (RX)
Digital VideoLoop Through
Electrical (THRU)
Chassis Slot #1
Chassis Slot #2
Chassis Slot #3
Chassis Slot #4
ManagementInterface
ProcessorPower
Controller
Digital VideoOptical (TX)
Digital VideoElectrical (OUT 1)
Digital V ideoElectrical (OUT 2)
Video Monitor (MON)
EQ
SFPOptical toElectrical
SFPElectricalto Optical
DLC100
6
DLC100 Specifications
environmentalAmbient Storage -40 to 80°C TemperatureAmbient Operating 0 to 50°C Temperature of DL4000 Chassis RelativeHumidity 10to95%(non-condensing)Power Dissipation 6W
physicalDimensions 0.8" x 5" x 10.8" 1 slot in DL4000 chassis
Optical InterfaceArtel Video SFP See SFP Specification Sheet, p. 28
electrical InterfaceSignal Formats •1.485Gb/s -HD-SDI(SMPTE292M) •270Mb/s -SD-SDI(SMPTE259M-C,ITU656) - SDTI (SMPTE 305M) -DVB-ASI -ARTEL 270 •19.39Mb/s ATSC (SMPTE 310M) Signal Polarity Non Inverting Channels 1-transmit, 1-receive Connectors Input(1) BNC75ohms LoopThrough(1) BNC75ohms Output(2) BNC75ohms Monitor Mini75ohmSMB ReturnLoss >15dB,5-1485MHz CableEqualizationforBelden 0to350meters(270Mb/s) 1694A type cable: 0 to 140 meters (1485 Mb/s)
Regulatory Conformance Compliance:NEBSLevel3,CSA60950,EN60950,EN55022, FCC Part 15 (Class A), CISPR 22
Ordering InformationDLC100 Function Module
Model Description Part #
DLC100 DLC Multi-rate, multi-function 390-008015-00
Video Transceiver
Video SFP
Model Description Part #
DLS31VX-11 VideoSFP1310nmTransceiver11dB 393-021310-11DLS31VX-30VideoSFP1310nmTransceiver30dB 393-021310-00DLS55VX-30VideoSFP1550nmTransceiver30dB 393-021550-00DLSCxxVX-30VideoSFPCWDMTransceiver30dB 393-041xx1-00
See SFP Specification Sheet for detailed Ordering Information, p. 28
Monitor Cable
Model Description Part #
DL100MC-72 Monitor Cable, Mini 75ohm 396-001001-00
SMBtoBNC,72”L
Specifications are subject to change without notice.
DLC100 Rev6_09-08-13
Electrical Input, Dual Electrical Outputs, and Optical Transceiver
Front panel monitoring and status displays SFP Optics(Small Form-Factor Pluggable)
7
www.artel.com | 978-263-5775 | [email protected] | [email protected]
When the world is watching, you can depend on Artel
DWDM Optical Multi-Rate Video Transmitter ModuleDL4000 VIDeO TRAnSpORT SYSTeM
TheDLC100Tisaflexiblefiberoptictransmittermoduleforalldigitalvideo
formats from 19.39Mb/s to 1.485Gb/s and features built-in DWDM optics with
0dBmor+7dBmlaunchpower.
TheDLC100TsupportscompressedoruncompressedHD,HD-TV,SDIandDVB-ASI.The
modulefeaturesonboardDWDMlaserswith+7dBmlaunchpowertoprovideflexibility
totransport40mixedvideoservicesoverasinglefiber.Inputsareeitherexternal,from
BNCorinternalfromothermodulesinchassis,addingcosteffectivehighpowerDWDM
capabilities to all DL4000 function modules. For compatibility with other Artel and
industrystandardreceiversandopticalmultiplexers,theDLC100TfeaturesITUG.694.1
lasers and non dithered/scrambled electrical to optical conversion.
FeaturesSingle card electrical to Optical Video TransmitterSupports all digital formats• 1.485Gb/sHD-SDI(SMPTE292M)
• 270Mb/sServices
• SD-SDI(SMPTE259M-C,ITU656)
• SDTI (SMPTE 305M)
• DVB-ASI
• Other 270Mb/s services
• 19.39Mb/sATSC(SMPTE310M)
Automatic rate selection• Ratelockoutviaonboardswitchor management module
• FullReclockingremovesjitterfromSDI
Onboard DWDM Optical Transmitter• 40ITUG.694.1Channels(21-60)
• Transportupto40mixeddigitalservices overasinglefiber
• Upto37dBmOpticalbudget
Interoperates with • DigiLink1220/2701
• DLC100
• OtherDL4000Modules
• NonDithered/NonScrambledOpticalReceivers
• MegaWav
• ITU694.2OpticalMultiplexers
Inputs• 75ohmBNC
• OthermodulesinDL4000Chassis (viabackplane)
Outputs• Optical(0dBmor+7dBm)
• OthermodulesinDL4000Chassis(viabackplane)
Monitor Options• Frontpanelmonitorselectablebetweenoptical inputandopticaloutput(Mini75ohmSMB)
• Rearpanelmonitorofelectricalinput
• FrontandrearpanelstatusLEDs
Remote Management via DL-Manager • Noexternalsoftwarerequired• HTTPorSNMPv2• Monitor• Configure• Upgradefirmware
EQDWDMLaser
PowerController
Processor
Backplane #1Backplane #2Backplane #3Backplane #4
ManagementInterface
Backplane #1Backplane #2Backplane #3Backplane #4
Digital Video(Electrical)
Digital VideoLoop Through
(Electrical)
Digital Video(Optical)
Video Monitor
DLC100T
8
DLC100T Specifications
DLC100T Rev2_09-08-06
environmental
Operating Temperature 0 to 50° of DL4000 Chassis Ambient Storage -40 to 80°C Temperature RelativeHumidity 10to95%(non-condensing)Power Dissipation 6 watts
physicalDimensions 0.8” x 5” x 10.8” 1 slot in DL4000 chassis
Optical Interface - Standard Launch
ITUG.694.1DWDMChannel21through60
OpticalPowerOutput 0dBm(min)+3dBm(max)
OpticalWavelength ITUG.694.1Grid+ 0.1 nm
SpectralWidth <0.8nmFWHM
Optical Connector LC/PC female
DispersionPenalty 1dB@120km
Optical Interface - High power Launch
ITUG.694.1DWDM Channel 21 through 60
OpticalPowerOutput +7dBm(min)+8dBm(max)
OpticalWavelength ITUG.694.1Grid+ 0.1 nm
SpectralWidth <0.8nmFWHM
Optical Connector LC/PC female
DispersionPenalty 1dB@120km
electrical InterfaceSignal Formats•1.485Gb/s-HD-SDI(SMPTE292M)•270Mb/s-SD-SDI(SMPTE259M-C,ITU656) - SDTI (SMPTE 305M)-DVB-ASI - ARTEL 270•19.39Mb/s - ATSC (SMPTE 310M)Connectors Input(1) BNC75ohmsOutput(1) BNC75ohmsFrontPanelMonitor(1) Mini75ohmSMBReturnLoss >15dB,5-1485MHzCableEqualizationforBelden 0to350meters(270Mb/s)1694A type cable 0 to 140 meters (1485 Mb/s)
Regulatory Conformance Compliance:NEBSLevel3,CSA60950,EN60950,EN55022, FCC Part 15 (Class A), CISPR 22
Ordering InformationDLC100T DWDM Optical Multi-Rate Video Transmitter Module
Model Description Part #
DLC100T-xx Multi-Rate DWDM Digital 390-008016-xx* Video Transport Module
DLC100T-xx+7 +7dBmMulti-RateDWDM 390-008017-xx* Digital Video Transport Module
*Specify ITU G.694.1 DWDM Channel 21-60
Model Description Part #
DL100MC-72 Monitor Cable, 396-001001-00 Mini75ohmSMBtoBNC,72”L
Note: Specifications are subject to change without notice.
Rear panel input monitor and optical outputFront panel monitoring and status displays SFP Optics(Small Form- Factor Pluggable)
9
www.artel.com | 978-263-5775 | [email protected] | [email protected]
When the world is watching, you can depend on Artel
Features
Single Card Audio embedder and Video Transport
embed into SDI or SDTI• OnetoFourAnalogaudio channels• OneortwoAES-3audiopairs• Asynchronousorsynchronousdigitalaudio• Standbyvideosignalcontinuesto deliver audio on loss of video input
Optical Transport (with or without embedded audio)• SD-SDI(SMPTE259M-C,ITU656)• SDTI(SMPTE305M)• DVB-ASI• Artel270• AnalogAudio(4)• AES-3(2stereopairs)• Ratelockoutviaonboardswitch or management module• FullReclockingremovesjitterfromSDI
Interoperates with• DigiLink1220/2701
• DLC100
• OtherDL4000Modules
•NonDithered/NonScrambledOptical Receivers
• MegaWav
•ITUG694.2OpticalMultiplexers
Inputs • Video(withorwithoutembeddedaudio)
• 75ohmBNC
• Other modules on DL4000 Chassis(viabackplane)
• Audio
• Analog Audio via 600ohm or high-Z balanced
• AES-3 110ohm balanced
• AES-3 75ohm unbalanced (DLC150E/D)
Outputs• OpticalviaSFP(1310nm,1550nm, CWDM, DWDM)
• OthermodulesinDL4000Chassis (viabackplane)
Monitor options•Frontpanelmonitor(Mini75ohm SMB)selectablebetween: • Input video (pre-embed) • Output video (post-embed)•FrontandrearpanelstatusLEDs
Remote Management via DL-Manager • Noexternalsoftwarerequired• HTTPorSNMPv2• Monitor• Configure• Upgradefirmware
SDI/SDTI 4 Channel Analog/Digital AeS Audio embed and Transport ModuleDL4000 DIgITAL VIDeO TRAnSpORT SYSTeM
The DLC150E is a flexible audio embedder and video transport card designed for use
in the DL4000 Digital Video Transport System. The DLC150E will embed analog or AES
audio into SDI and SDTI as well as transport all standard 270Mb/s digital formats.
The DLC150 functions as both an audio embedder for four channel analog or two stereo pair
AES-3audio,andasa270Mb/svideooverfiberopticstransportmodule.TheDLC150uses
industry standard 1310nm, 1550nm, and CWDM Small Form-Factor Pluggable (SFP) optics.
Provisioningandmonitoringisaccomplishedusingswitches,LEDs,frontmonitorjack,SNMP
orHTTPviaDL-Monitor.
Analog Audio #1AES-3 #1 (bal)
Analog Audio #2
Analog Audio #3AES-3 #2 (bal)
Analog Audio #4Digital Video
Backplane #1
Backplane #2
Backplane #3
Backplane #4
Optical In
Backplane #1
Backplane #2
Backplane #3
Backplane #4
Monitor
OpticalOutput
RateMatch
A-D
A-D
RateMatch
A-D
A-D
AESEncode
AESEncode
SFPOptical toElectrical
StandbyVideo or
Keep AliveGenerator
EmbedandEDH
ProcessorPowerController
ManagementInterface
SFPOptical toElectrical
DLC150e
10
DLC150e Specifications
DLC150Rev3_09-08-24
environmentalOperating Temperature 0 to 50° C of DL4000 Chassis Ambient Storage Temperature -40 to 80°C RelativeHumidity 10to95%(non-condensing) Power Dissipation 10W
physicalDimensions 0.8” x 5” x 10.8”
1 slot in DL4000 chassis
Optical InterfaceArtel Video SFP See SFP Specification Sheet, p. 28
Analog Audio FeaturesSMPTE 272M embedding of 2 analog stereo pairs (one to four analog signals) in SD-SDI (SMPTE 259M) or SDTI (SMPTE 305M)• 24-bitsampling@48kHz• 600Ohmbalancedandhigh-impedancebalancedinput(3-position terminalblock)• 0dBFS(fullscale)adjustablefrom+16dBmto+28dBmin2dBsteps(600Ohm)• Selectabletargetgroup(0,1,2,3)• Optiontonotembedifaudiopresentinthetargetgroup
• Optiontodisableembeddingfortransport-onlyapplications
Analog Audio SpecificationsQuantizing 24-bitSamplingRate 48kHzNumber of Channels 4 analog audio balancedConnector 3-positionterminalblockplugsInputImpedance 600ohmsor>100kOhms,SwitchableInputReturnLoss >30dB(600Ohms)InputCommonModeRejection >60dB20Hz-20kHzInputCommonModeRange +/-10V(20Vp-p)MaximumInputLevel(clipping) 0dBFS=+10to+24dBm(600ohm) Adjustablein2dBsteps AmplitudeFrequencyResponse +/-0.1dB(20Hzto20kHz)Distortion(THD+N) <0.05%(20Hz-20kHz@+18dBm)IntermodulationDistortion <0.05%(SMPTERP12,60/7k,4:1)AudioSignal-to-Weighted- >90dBA(referredto+18dBm) Noise RatioAudioChannelCrosstalk <-70dB(20Hz-20kHz)VideoCrosstalk -85dBInsertionGain 0.0dB+/-0.2dBInterchannel Phase Delay <1°(20Hz-20kHz)Audio-Video Delay <10 ms
AeS-3 Audio FeaturesSMPTE 272M embedding of 2 digital audio streams (two stereo pairs) in SD-SDI (SMPTE 259M) or SDTI (SMPTE 305M)• InterfacesA,B,C,D,E,F,andG• AES-3audiostreamsupportfor110-ohmbalanced(3-positionterminalblock)• AES-3audiostreamsupportfor75-ohmunbalanced(BNC)[Note:separateorder number for unbalanced input]• Synchronous(48kHz)andasynchronous(32.0kHz,44.1kHz,48kHz)streams supported• Selectabletargetgroup(0,1,2,3)• Optiontonotembedifaudiopresentinthetargetgroup• Optiontodisableembeddingfortransport-onlyapplications
Digital Video FeaturesTransport of all 270Mb/s digital video • SD-SDI(SMPTE259M)• SDTI(SMPTE305M)• DVB-ASI(noaudioembedding)• Artel270(noaudioembedding)• AutomaticdetectionJitter cleanup of SD-SDI and SDTI75ohmBNCinput• >15dBreturnloss• Cableequalizationupto300m(Belden8281orequivalent)EDHcheckingandgenerationforSD-SDIandSDTIStandby Video Generator• SelectableSD-SDIsignalallowsaudiotobedeliveredwheninputvideoislost• Selectablenon-videokeepalivemaintainslinkoperationwhileallowing downstreamequipmenttodetectlossofsignalwheninputvideoislostDLC150Ecanbecascadedviabackplaneinputsandoutputsformulti-group
embedding
Regulatory Conformance Compliance:NEBSLevel3,CSA60950,EN60950,EN55022FCCPart15(ClassA),CISPR 22
Ordering InformationDLC 150E Function Module
Model Description Part # DLC150E SDI Audio Embedder and Transport 390-008050-00
Video SFPModel Description Part #DLS31VX-11 VideoSFP1310nmTransceiver11dB 393-021310-11DLS31VX-30 VideoSFP1310nmTransceiver30dB 393-021310-00DLS55VX-30 VideoSFP1550nmTransceiver30dB 393-021550-00DLSCxxVX-30 VideoSFPCWDMTransceiver30dB 393-041xx1-00
Monitor CableModel Description Part #DL100MC-72MonitorCable,75-OhmMini-SMBTOBNC,72”L 396-001001-00
Note: Specifications are subject to change without notice.
Front panel monitoring and status displays Rear Panel Connections including audio cable connector
SFP Optics(Small Form-Factor
Pluggable)
11
www.artel.com | 978-263-5775 | [email protected] | [email protected]
When the world is watching, you can depend on Artel
DL4000 VIDeO TRAnSpORT SYSTeM
The DLC170AD converts analog video and audio to SDI (SMPTE 259M) and provides
opticaltransport.UsedwiththeDLC170DA,thedesigninsuresfullTV-1RS250-C“short
haul”analogperformanceoveratrueSMPTE259MSD-SDIopticaltransportlink.
Embed&
EDH
SFPElectrical to Optical
Analog Video
Monitor
1
Backplane 2
Backplane 3
Backplane 4
Optical Out
PowerController
Processor
Management Interface
Analog Audio D
A-D
A-D
AES Encode
Analog Audio B
A-D
A-D
AES Encode
Standby Video
Analog Audio A
Analog Audio C
VideoA-D
Keep Alive Generator
Backplane
DLC170AD Composite Video (nTSC/pAL) and Analog Audio to SDI Conversion
with Optical Transport Module
The DLC170AD uses advanced high performance 12-bit video processing with adaptive
3DcombfilterstoconvertNTSC-M/PAL-B/GanalogcompositevideotoITU-RBT.601/656
compliant, 525 or 625 line, 4:2:2 component digital video. Four channels of analog audio
areconvertedto24bitdigitalsignalsandsampledat48kHzandthenembeddedintothe
digital video per SMPTE 272M for a total of 4 analog channels. The audio can be inserted
into any one of the four groups.
Usingthebackplanetoprovidejumperfreeconnections,additionalaudiochannelgroups
can be added by cascading the DLC170AD digital output to one or more DLC150E audio
embedders.AnSFPinstalledintothefinalmoduleprovidestheopticaloutputofthe
combined signals.
Afrontpanelmonitorjackcanbeselectedtooutputeitheranalogordigitalvideo.When
settoanalog,theincominganalogvideocanbecheckedforsignallevelandqualityusing
conventionalanalogvideoequipment.Whensettodigital,theconvertedvideoin270
Mb/sSDIformatwithembeddedaudiocanbecheckedusingdigitalvideotestequipment.
FeaturesSingle card Composite Video and Analog Audio to SDI conversion with optical transmitter (electrical to optical)
Convert composite (nTSC/pAL) to SDI (SMpTe 259M) • Analogcomposite75-ohmvideo inputBNC• AutomaticNTSC-M/PAL-B/Gformat detection• 12-bitvideocompositeto10-bit component digital processing• Advanced,adaptive3Dcombfilter • ComprehensiveVBIdatahandling• SMPTE259MSD-SDI270Mb/soutput• Automaticandmanualgainand equalization(150meters)
Convert Analog Audio to AeS and embed into SDI • Balanced600ohmanalogaudioinputs(4)• SMPTE272M24-bit,48kHzaudio embedding
Use with DLC170DA for optical transport of Analog Video and Audio• ExceedsTV-1andANSIT1.502“short haul”specification
Optical transport via industry standard SFp optics• WDM(1310nm,1550nm)• CWDM• DWDMperITUG694.1Channels21-60• Upto36dBLossBudget
Interoperates with• OtherDL4000videomodules• DigiLink1220/2701(SDImode)• Othernon-scrambledornon-dithered SDI optical transmitters and receivers
Monitor options• Frontpanelmonitor(Mini75ohmSMB) selectable between: • NTSC or PAL (Pre-conversion) • SDI (Post-conversion)• FrontandrearpanelstatusLED’s
Remote Management via DL-Manager • Noexternalsoftwarerequired• HTTPorSNMPv2• Monitor• Configure• Upgradefirmware
12
DLC170AD Specifications
170ADRev1_09-08-06
Analog Video to SDI Conversion (6) Output Format SMPTE 259M via optical interfaceorbackplane Input Format SMPTE-170M NTSC-M or ITU-RBT.624-4PAL-B/G Composite VideoInput Amplitude 1.0 V p-p nominalInputGainRange ±3dB(1)Input Common Mode Range ±10 VInputCommonModeRejection >30dB(0to5.5MHz)InputImpedance 75ohmsorHi-ZInputReturnLoss >30dB,75ohms(0to5.5MHz)FreqAmplitudeResponseNTSCto4.5MHz <0.10dBNTSCto5.0MHz <0.10dBPALto4.8MHz <0.10dBPALto6.0MHz <0.10dBDifferential Gain <1.0%Differential Phase <0.7 DegreesLine Time Distortion <1.0%Chroma-Luma Gain <±2%Chroma-Luma Delay <5 nSSignaltoNoise,weighted >67dB
Analog Audio to AeS and embed (6) Channels 4(2)Input BalancedAnalogInputImpedance 600Ohmsor>100kOhmsInput Common Mode Range ±30VInputCommonModeRejection >60dBNominal(test)Level 18dBm(3)MaximumLevel(0dBFSclipping) +10to+24dBm(4)InsertionGain ±0.25dB(5)FreqAmplitudeResponse ±0.3dB (20Hzto20kHz)THD+N(20-20k@+18dBm) 0.01%SNR(weighted) >95dBACrosstalk@10kHz 70dBAudio to Video Lead/Lag <2 ms
(1) Automatic or manual control.(2) Specifications are with 48 kHz, 24-bit audio. (3) Nominal level is +20 dBm for 0 dBFS (clipping) with performance specifications based on a +18 dBm test level.(4) User selectable maximum (0 dBFS) level in eight 2 dB steps(5) Each end set to the same nominal 0 dBFS level.(6) Analog Specifications based on end-to-end performance with DLC170DA
environmentalOperating Temperature 0 to 50°C of DL4000 ChassisAmbient Storage Temperature -40 to 80°CRelativeHumidity 10to95%(non-condensing)Power Dissipation 10W
physicalDimensions 0.8” x 5” x 10.8” 1 slot in DL4000 chassis
Optical InterfaceArtel Video SFP See SFP Specification Sheet, p. 28
Regulatory ConformanceCompliance:NEBSLevel3,CSA60950,EN60950,EN55022FCCPart15(Class A), CISPR 22
Ordering Information
DLC 170AD Function Module
Model Description Part #
DLC170AD Analog to SDI Conversion and 390-008070-00 Optical Transport
SFP Optics
Model Description Part #
DLS31VX-11 VideoSFP1310nmTransceiver11dB 393-021310-11DLS31VX-30 VideoSFP1310nmTransceiver30dB 393-021310-00DLS55VX-30 VideoSFP1550nmTransceiver30dB 393-021550-00DLSCxxVX-30 VideoSFPCWDMTransceiver30dB 393-041xx1-00DLSWxxHX-33 2.5Gb/sSFPDWDMTransceiver33dB 393-240033-xx
Monitor Cable
Model Description Part#
DL100MC-72 MonitorCable,75-OhmMini-SMB 396-001001-00 toBNC,72”L
Note: Specifications are subject to change without notice.
Front panel monitoring and status displays SFP Optics(Small Form-Factor Pluggable)
Rear Panel Connections including audio cable connector
13
www.artel.com | 978-263-5775 | [email protected] | [email protected]
When the world is watching, you can depend on Artel
DLC170DA SDI to Composite Video (nTSC/pAL) and Analog Audio Conversion
with Optical Transport ModuleDL4000 VIDeO TRAnSpORT SYSTeM
The DLC170DA converts optically received SDI to Composite Analog Video (NTSC or
PAL)andAnalogorAESAudio.UsedwiththeDLC170AD,thedesigninsuresfullTV-1
RS250-C“shorthaul”analogperformanceoveratrueSMPTE259MSD-SDIoptical
transportlink.Additionallyitcanbeusedasanopticalreceiverforalldigitalsignals
from19.39ATSCto1.485Gb/sHD-SDImakingtheDLC170DAidealfortheeventual
conversion from Analog to Digital Video Transport.
SFPElectrical to Optical
Monitor
Backplane 1
Optical Out
SFPOptical to Electrical
Optical In
PowerController
ProcessorManagement
Interface
Video Out
D -A
D-A
AES Decode Analog Audio B
Analog Audio AAES -3 # 1 (bal)
D -A
D -A
AES Decode Analog Audio D
Analog Audio CAES -3 #2 (bal)
EDH&
De-Embed
VideoD -A
Backplane 2Backplane 3Backplane 4
Backplane 1Backplane 2Backplane 3Backplane 4
Theinnovativemoduleusesadvancedvideoandaudioprocessingforexceptionalquality
conversion of SDI (SMPTE 259M) to Composite Video and Analog Audio. It accepts a 270
Mb/s525/625lineSDIinputfromeithertheopticalSFPreceiverorthebackplanethen
converts it to Composite Analog and Audio signals.
Thereceivedopticalsignalcanbedirectedtothebackplaneforadditionalchannelgroupsto
be processed by other cards in the DL4000 chassis. Audio embedded per SMPTE 272M levels
A,B,andCcanbeextractedaseitherfourbalancedanalogaudiochannelsortwostereoAES
digital audio streams.
A front panel video monitor with analog or digital selector switch allows the incoming digital
(with embedded audio) or composite analog output to be monitored using conventional
digital/analogvideoequipment.
FeaturesSingle card SDI to Composite Video and Analog Audio Conversion with optical transmitter (electrical to optical)
Convert SDI (SMpTe 259M) to Composite Video• NTSCorPAL• AnalogComposite75-ohm videooutputBNC• 10-bitComponentDigital525/625line toNTSC-MorPAL-B/Gconversion• Composite12-bitprocessing
Convert SDI to Analog or AeS Audio• SMPTE272M-ABCaudiode-embedding with 24-bit audio conversion• Balancedanalogaudiooutputs(4)• BalancedAESaudiooutputs(2)
Optical Transport of:• AnalogVideoandAudio • 1.485Gb/sHD-SDI(SMPTE292M)• 270Mb/s • SD-SDI(SMPTE259M-C,ITU656) • SDTI (SMPTE 305M) • DVB-ASI • Artel 270
Optical to Optical Repeater
Optical transport via industry standard optics• WDM(1310nm,1550nm)• CWDM• DWDMperITUG694.1channels21-60• Upto36dBlossbudget
Interoperation with• OtherDL4000videomodules• DigiLink1220/2701• Othernon-scrambledornon-dithered SDI optical transmitters and receivers
Monitor options• Frontpanelmonitor(mini75ohmSMB) selectable between: • NTSC or PAL (Post-conversion) • SDI (Pre-conversion)• FrontandrearpanelstatusLEDs
Remote Management via DL-Manager • Noexternalsoftwarerequired• HTTPorSNMPv2• Monitor• Configure• Upgradefirmware
14
DLC170DA Specifications
DLC170DARev3_09-08-06
SDI-to-Analog Video Conversion (6) Output Format SMPTE-170M NTSC-M orITU-RBT.624-4PAL-B/G Composite VideoOutput Amplitude 1 V p-p nominalOutput Impedance 75ohmsOutputReturnLoss(0to5.5MHz) >30dB,75ohmsFreqAmplitudeResponseNTSCto4.5MHz <0.10dBNTSCto5.0MHz <0.10dBPALto5.5MHz <0.10dBPALto6.0MHz <0.10dBDifferential Gain <1.0%Differential Phase <0.7 DegreesLine Time Distortion <1.0%Chroma-Luma Gain <±2%Chroma-Luma Delay <5nsSignaltoNoise,weighted >67dB
SDI Audio-to-Analog Audio Conversion (6) OutputSignal BalancedAnalog (1)Output Impedance < 50 ohms (2)Nominal(test)Level 18dBm (3)MaximumLevel(clip) +10to+24dBm (4)InsertionGain ±0.25dB(5)FreqAmplitudeResponse ±0.3dB(20Hzto20kHz)THD+N(20-20k@+18dBm) 0.01%SNR(weighted) >95dBACrosstalk@10kHz 70dBAudio to Video Lead/Lag <2 ms
(1) Specifications are with 48 kHz, 24-bit audio (2) Designed to drive 600ohm loads (3) Nominal level is +20 dBm for 0 dBFS (clipping) with performance specifications based on a +18 dBm test level.(4) User selectable maximum (0 dBFS) level in eight 2 dB steps(5) Each end set to the same nominal 0 dBFS level. (6) Analog specifications based on end-to-end performance with DLC170AD
SDI-Mode Input/OutputBitRate 270.000Mb/s ±100ppmBER 10-13@270Mb/sOutput Jitter <500psI/OConnectors BNCFemale/75ohmI/O Levels Conforms to SMPTE 259M
AeS Audio Output OutputSignal BalancedDigital (1)Output Format AES3-2003 CompliantOutput Impedance 110ohms
(1) Specifications are with 48 kHz, 24-bit audio SMPTE 272M-C Embedded Audio
environmentalAmbient Operating Temperature 0 to 50°C of DL4000 ChassisAmbient Storage Temperature -40 to 80°CRelativeHumidity 10to95% (non-condensing)Power Dissipation 10W
physicalDimensions 0.8” x 5” x 10.8” 1 slot in DL4000 chassis
Optical InterfaceArtel Video SFP See SFP Specification Sheet, p. 28
Regulatory Conformance
Compliance:NEBSLevel3,CSA60950,EN60950,EN55022FCCPart15 (Class A), CISPR 22
Ordering InformationDLC 170DA Function Module
Model Description Part #
DLC170DA SDI to Analog Conversion 390-008080-00 and Optical Transport
SFP Optics
Model Description Part #
DLS31VX-11 VideoSFP1310nmTransceiver11dB 393-021310-11DLS31VX-30 VideoSFP1310nmTransceiver30dB 393-021310-00DLS55VX-30 VideoSFP1550nmTransceiver30dB 393-021550-00DLSCxxVX-30 VideoSFPCWDMTransceiver30dB 393-041xx1-00DLSWxxHX-33 SFPDWDMTransceiver33dB 393-240033-xx
Monitor Cable
Model Description Part #
DL100MC-72 Monitor Cable, 75-ohm 396-001001-00 Mini-SMBTOBNC,72”L
Note: Specifications are subject to change without notice.
SFP Optics(Small Form-Factor Pluggable)
Front panel monitoring and status displays Rear Panel Connections including audio cable connector
15
www.artel.com | 978-263-5775 | [email protected] | [email protected]
When the world is watching, you can depend on Artel
ManagementInterface
ProcessorPower
Controller
SFP ( X)(RX) EthernetT Optical
(RX)(TX)Ethernet
EthernetController
PHY
SFPOptical (RX)
Ehernet (TX)
Features
Single Card Optical ethernet Transceiver• ElectricaltoOptical• OpticaltoElectrical• OpticaltoOptical
Transport• 10Base-T• 100Base-TX• 1000Base-T• EthernetStandard
Supports ethernet Standards• 803.2• 802.3u• 802.3ab• 802.3z(fiberinterface)
Full Featured• 10/100/1000AutoNegotiate
• AutoMDI/MDI-X
• Autofull-duplexandhalf-duplex
• Ratelockoutviaonboardswitchor management module
• ManagementModulemonitoring andconfiguration
• Equalizationfor100mCat5 UTP@1000Mb/s
Industry Standard SFp Optics
• Upto34dBmopticalbudget
• 1310nm,1550nm • CWDM8Channels(1471nm–1611nm) • DWDM40Channels(21-60)
Front and rear panel status LeDs• Major/Minoralarms• Linkstatus• Activity• Rate
Multiple Monitor Options• FrontpanelmonitoringandstatusLED
Remote Management via DL-Manager • Noexternalsoftwarerequired• HTTPorSNMPv2• Monitor• Configure• Upgradefirmware
10/100/1000Mb/s ethernet Transport Module
TheDLC200isaflexiblefiberopticEthernettransceivermoduleforallEthernet
rates including Gig-E. The DLC200 features industry-standard SFP optics to
provide 1310nm, 1550nm, CWDM, and DWDM optical transport with optical
budgetsupto34dBm.
DL4000 VIDeO TRAnSpORT SYSTeM
DLC200
The DLC200 provides for optical transport of 10Mb/s, 100Mb/s and 1000Mb/s Ethernet.
A fully featured Ethernet Optical transceiver, the DLC200 has two externally accessible
SFPsandoneUTP(RJ45port).ItcanbedeployedasUTP-to-optical,asoptical-to-UTP,
or as an optical-to-optical (optical repeat/regenerate). A single piece rugged module,
takingoneslotintheDL4000chassis,itincludesfrontpanelLEDsforvisualmonitoring
ofstatusandon-boardswitchesforconfiguration.Externalaccessibleindustrystan-
dardSFPopticsallowforrapid,toolfreeandflexibledeploymentintoopticalnetworks.
16
DLC200 Specifications
environmentOperating Temperature 0 to 50°C of DL4000 Chassis Ambient Storage -40 to 80°C TemperatureRelativeHumidity 10to95%(non-condensing)Power Dissipation 6W
physical
Dimensions 0.8” x 5” x 10.8” 1 slot in DL4000 chassis
Optical InterfaceArtel Video SFP See SFP Specification Sheet, p. 28
electrical InterfaceConnector RJ45Data Rates 10Mb/s 100Mb/s 1000Mb/s
Regulatory ConformanceCompliance:NEBSLevel3,CSA60950,EN60950,EN55022, FCC Part 15 (Class A), CISPR 22
DLC200Rev1_09-08-06
Ordering Information
Model Description Part #
DLC200 10/100/1000Mb/s Ethernet 390-008027-00 Transport Module
SFP Optics (Small Form Pluggable)
Model Description Part #
DLS31VX-11 Video SFP 1310nm 393-021310-11 Transceiver11dBDLS31VX-30 Video SFP 1310nm 393-021310-00 Transceiver30dBDLS55VX-30 Video SFP 1550nm 393-021550-00 Transceiver30dBDLSCxxVX-30 Video SFP CWDM nm 393-041xx1-00 Transceiver30dB
Available in 8 CWDM channels.
DLSWxxHX-33 2.5Gb/sSFPDWDM 393-240033-xx Transceiver33dB
Specifications are subject to change without notice.
Front panel monitoring and status displays Rear panel UTP and dual SFP transceivers SFP Optics(Small Form-Factor Pluggable)
17
www.artel.com | 978-263-5775 | [email protected] | [email protected]
When the world is watching, you can depend on Artel
The Composite Analog to SDI conversion is performed using the same feature set as the popular DLC170AD
module.TheDLC270performsahighquality,featurerichformatconversionwithaudioembedding,and
includesafrontpanelmonitorjackselectabletoeithertheanaloginputortheconvertedSDIsignal.When
usedinconjunctionwithaDLC170DA,thedesigninsuresfullTV-1RS250-C“shorthaul”analogperformance
overatrueSMPTE259MSD-SDIopticaltransportlink.
Foropticaltransport,theDLC270includescapabilitiestotransmitbroadcastqualityjitterfreeHD-SDI(SMPTE
292M),SD-SDI(SMPTE259M-C),DVB-ASI,ATSCsignalsaswellasallother270Mb/sbasedtransportformats.Used
inconjunctionwiththeDLC170DA,migratingfromCompositeAnalogtoanydigitalformatispossiblewithout
replacinganyequipment.Indigitalmode,theDLC270iscompatiblewiththeDLC100,DLC300andothernon
scrambled or dithered optical receivers.
Optical transmission is performed using externally accessible SFP optics in 1310nm, 1550nm, CWDM or DWDM
wavelengths.Provisioningandmonitoringisaccomplishedusingswitches,frontandbackpanelLEDsandBNCs.
DL-Manager,anSNMPorHTTPremoteprovisionandmanagementtoolisalsoembeddedinthemodule.Cost
effective,flexible,andreliable,theDLC270continuesArtel’straditionofmakingtheworld’smostinnovativeand
reliablevideooverfiberopticstransporthardware.
FeaturesComposite Video and Analog Audio to SDI conversion with optical transmitter for all digital services (electrical to optical)
Convert composite (nTSC/pAL) to SDI (SMpTe 259M)• Analogcomposite75-ohmvideoinputBNC• AutomaticNTSC-M/PAL-B/Gformatdetection• 12-bitvideocompositeto10-bitcomponent digital processing• Advanced,adaptive3Dcombfilter• ComprehensiveVBIdatahandling• SMPTE259MSD-SDI270Mb/soutput• Automaticandmanualgainandequalization (150 meters)
Convert Analog Audio to AeS and embed into SDI• Balanced600ohmanalogaudioinputs(4)• SMPTE272M24-bit,48kHzaudioembedding
Use with DLC170DA for optical transport of Analog Video and Audio• ExceedsTV-1andANSIT1.502“shorthaul” specification
Optical transmitter for all digital Video formats (electrical to optical)• 1.485Gb/sHD-SDI(SMPTE292M)• 270Mb/s • SD-SDI(SMPTE259M-C,ITU656) • SDTI (SMPTE 305M) • DVB-ASI • Artel 270• 19.39Mb/sATSC(SMPTE310M)
Optical transport via industry standard SFp optics• WDM(1310nm,1550nm)• CWDM• DWDMperITUG694.1Channels21-60• Upto36dBLossBudget
Remote Management via DL-Manager • Noexternalsoftwarerequired• HTTPorSNMPv2• Monitor• Configure• Upgradefirmware
Multi-Rate Digital Transmitter with Composite Video (nTSC/pAL) and Analog Audio to SDI Conversion Module
The DLC270 is an innovative module, providing conversion of Composite Video and
Audio to SDI (SMPTE 259M) along with optical transports for the converted video as
well as all digital video formats from 19.39Mb/s to 1.485Gb/s. Combining standards
based optical transport into one module provides the ultimate flexibility for moving
fromAnalogtodaytoDigitaltomorrowwiththesameequipment.
DL4000 VIDeO TRAnSpORT SYSTeM
DLC270
18
Embed&
EDH
SFPElectrical to Optical
Analog Video
Monitor
1
Backplane 2
Backplane 3
Backplane 4
Optical Out
PowerController
Processor
Management Interface
Analog Audio D
A-D
A-D
AES Encode
Analog Audio B
A-D
A-D
AES Encode
Standby Video
Analog Audio A
Analog Audio C
VideoA-D
Keep Alive Generator
Backplane
Digital Video EQ Tx Mon
DLC270 Specifications
DLC100 Rev3_09-08-06
environmentalAmbient Storage Temperature -40 to 80°C Ambient Operating Temperature 0 to 50°C of DL4000 Chassis RelativeHumidity 10to95%(non-condensing)Power Dissipation 16W
physicalDimensions 1.4” x 5" x 10.8" 2 slots in DL4000 chassis
Optical InterfacePackage SFP
Artel Video SFP See SFP Specification Sheet, p. 28
electrical Interface (Digital)
Signal Formats •1.485Gb/sHD-SDI(SMPTE292M) • SD-SDI(SMPTE259M-C,ITU656) • SDTI(SMPTE305M) • DVB-ASI • ARTEL270 •19.39Mb/sATSC(SMPTE310M)
Signal Polarity Non Inverting Channels 1-transmit Connectors Input(1) BNC75ohms LoopThrough(1) BNC75ohms Monitor(2) Mini75ohmSMB ReturnLoss >15dB,5-1485MHz CableEqualizationforBelden 0to350meters(270Mb/s) 1694A type cable: 0 to 140 meters (1485 Mb/s)
Regulatory Conformance Compliance:NEBSLevel3,CSA60950,EN60950,EN55022, FCC Part 15 (Class A), CISPR 22
Ordering Information
DLC270 Function Module
Model Description Part #DLC270 Multi-rate Digital Transmitter with 390-008075-00 Composite Video and Analog Audio
Video SFP
Model Description Part #DLS31VX-11 VideoSFP1310nmTransceiver11dB 393-021310-11DLS31VX-30 VideoSFP1310nmTransceiver30dB 393-021310-00DLS55VX-30 VideoSFP1550nmTransceiver30dB 393-021550-00DLSCxxVX-30 VideoSFPCWDMTransceiver30dB 393-041xx1-00 DLSWxxHX-33 VideoSFPDWDMTransceiver33dB 393-240033-xx
Monitor Cable
Model Description Part #DL100MC-72 Monitor Cable, Mini 75ohm 396-001001-00 SMBtoBNC,72”L
Analog Video to SDI Conversion (6) Output Format SMPTE 259M via optical interfaceorbackplane Input Format SMPTE-170M NTSC-M or ITU-RBT.624-4PAL-B/G Composite VideoInput Amplitude 1.0 V p-p nominalInputGainRange ±3dB(1)Input Common Mode Range ±10 VInputCommonModeRejection >30dB(0to5.5MHz)InputImpedance 75ohmsorHi-ZInputReturnLoss >30dB,75ohms(0to5.5MHz)FreqAmplitudeResponseNTSCto4.5MHz <0.10dBNTSCto5.0MHz <0.10dBPALto4.8MHz <0.10dBPALto6.0MHz <0.10dBDifferential Gain <1.0%Differential Phase <0.7 DegreesLine Time Distortion <1.0%Chroma-Luma Gain <±2%Chroma-Luma Delay <5 nSSignaltoNoise,weighted >67dB
Analog Audio to AeS and embed (6) Channels 4(2)Input BalancedAnalogInputImpedance 600Ohmsor>100kOhmsInput Common Mode Range ±30VInputCommonModeRejection >60dBNominal(test)Level 18dBm(3)MaximumLevel(0dBFSclipping)+10to+24dBm(4)InsertionGain ±0.25dB(5)FreqAmplitudeResponse ±0.3dB (20Hzto20kHz)THD+N(20-20k@+18dBm) 0.01%SNR(weighted) >95dBACrosstalk@10kHz 70dBAudio to Video Lead/Lag <2 ms
(1) Automatic or manual control.(2) Specifications are with 48 kHz, 24-bit audio. (3) Nominal level is +20 dBm for 0 dBFS (clipping) with performance specifications based on a +18 dBm test level.(4) User selectable maximum (0 dBFS) level in eight 2 dB steps(5) Each end set to the same nominal 0 dBFS level.(6) Analog Specifications based on end-to-end performance with DLC270
19
SFP Optics(Small Form-Factor Pluggable)
Rear panel UTP and dual SFP transceivers
Front panel monitoring and status displays
www.artel.com | 978-263-5775 | [email protected] | [email protected]
When the world is watching, you can depend on Artel
270Mb/s Digital Video 4-to-1 TDM Multiplexer/De-multiplexer ModuleDL4000 VIDeO TRAnSpORT SYSTeM
TheDLC274utilizesTimeDivisionMultiplexing(TDM)tocombinefourindepen-
dent 270Mb/s video signals into one optical channel. This enables transport of
upto160270Mb/sserviceoverasinglefibermakingitidealforconservingboth
fiberandrackspace.
Artel’sDLC274providesaspaceefficientandcosteffectivemethodoftransportingfourmultiple
mixedformatvideoservicesoverasingleopticalwavelength.FourDLC274modulesfitina
DL4000chassisfortransportingupto16circuitsinasinglerackunitofspace.Opticalregenera-
tion or repeating is accomplished by using the cost effective DLC100 and 1310nm, 1550nm,
CWDM, or DWDM in Small Form-Factor Pluggable (SFP) optics that are available for transporting
upto160circuitscanbeoverasinglefiber.
FeaturesSingle Slot Card SetTransport four 270Mb/s video circuits on a single optical wavelength• Supportanycombinationof: • SD-SDI(SMPTE259M-C,ITU656) • SDTI (SMPTE 305M) • DVB-ASI • Other 270Mb/s services• UsewithDLC170forCompositeAnalog Transport
• FullreclockingremovesjitterfromSDI
Industry Standard 1.485Mb/s output Space efficient• UtilizesoneslotintheDL4000Video • Transportsupto16videocircuits perrackunit
Utilizes cost-effective DLC100 as repeaterFlexible SFp Transceiver Optics• CombinedReceiverandTransmitter• 1310nm,1550nm,CWDM,DWDM• 34dBOpticalBudget
• Externallyaccessible
Multiple Monitoring Options• Switchselectablefrontpanelmonitor ofindividualchannels(Mini75ohmSMB)• FrontandrearpanelstatusLEDs • Loss of video (individual channels) • Loss of optical input
• Laser (SFP) fail
Remote Management via DL-Manager • Noexternalsoftwarerequired• HTTPorSNMPv2• Monitor• Configure• Upgradefirmware
Backplane #1Backplane #2
Backplane #3
Backplane #4
Backplane #1
Backplane #2
Backplane #3
Backplane #4
TDMMUX
Video Monitor(MON)
High SpeedOptical Stream(TX)
Digital VideoChannel A
Digital VideoChannel B
Digital VideoChannel C
Digital VideoChannel D
SFPElectricalto Optical
A
B
C
D
SFPOptical
to Electrical
Optical In(RX)
ManagementInterface
ProcessorPowerController
ManagementInterface
ProcessorPowerController
TDMDEMUX
SFPElectricalto Optical
Digital Video 1
Digital Video 2
Digital Video 3
Digital Video 4
Backplane #1
Backplane #2
Backplane #3
Backplane #4
Video Monitor(MON)
SFPOptical
to Electrical
B
C
D
A
High SpeedOptical Stream
(RX)
High SpeedOptical Stream(TX)
ManagementInterface
ProcessorPowerController
ManagementInterface
ProcessorPowerController
DLC274
DLC274M DLC274D
20
DLC274 Specifications
DLC274 Rev5_09-03-24
environmentalOperating Temperature of 0 to 50°C DL4000 Chassis Ambient Storage Temp -40 to 80°C RelativeHumidity 10to95%(non-condensing)Power Dissipation <10 watts
physicalDimensions 0.8” x 5” x 10.8” 1 slot in DL4000 chassis
Optical InterfaceArtel Video SFP See SFP Specification Sheet, p. 28
electrical Interface270Mb/s Signal Formats -SD-SDI(SMPTE259M-C,ITU656) - SDTI (SMPTE 305M) -DVB-ASI - Others 270Mb/s services (+100ppm) Signal Polarity Non Inverting
electrical Interface (continued)
Channels 4 Connectors Input(4) BNC75ohms(DLC274M) Output(4) BNC75ohms(DLC274D) Monitor Mini75ohmsSMB ReturnLoss >15dB,5-270MHz
Regulatory Conformance Compliance:NEBSLevel3,CSA60950,EN60950,EN55022, FCC Part 15 (Class A), CISPR 22
Ordering InformationModel Description Part #DLC274M 270Mb/s SDI/ASI Video 4-to-1 390-008020-00
TDM Multiplexer
DLC274D 270Mb/s SDI/ASI Video 1-to-4 390-008030-00
TDM De-multiplexer
Optics Small Form Pluggable (SFP)
Model Description Part #
DLS31VX-11 VideoSFP1310nmTransceiver11dB 393-021310-11
DLS31VX-30 VideoSFP1310nmTransceiver30dB 393-021310-00
DLS55VX-30 VideoSFP1550nmTransceiver30dB 393-021550-00
DLSCxxVX-30 VideoSFPCWDMTransceiver30dB 393-041xx1-00
Available in 8 CWDM channels.
DLSWxxHX-33 2.5Gb/sSFPDWDMTransceiver33dB 393-240033-xx
Available in channels 21-60
Monitor Cable
Model Description Part #
DL100MC-72 Monitor Cable, 396-001001-00
Mini75ohmSMBtoBNC,72”L
Note: Specifications are subject to change without notice.
Four BNC electrical connections plus LC fiber opticsFront panel monitoring and status displays SFP Optics(Small Form-Factor Pluggable)
21
www.artel.com | 978-263-5775 | [email protected] | [email protected]
When the world is watching, you can depend on Artel
DL4000 VIDeO TRAnSpORT
The DLC300 incorporates numerous features in a flexible, easy to deploy and
configuremodulewithunparalleledqualityandreliability.Themoduleoptically
transports all digital formats from 19.39Mb/s ATSC to 3G-SDI (SMPTE 424M). To
minimizeinventorycostsandsimplifydeployment,itcanbeconfiguredasareceiver,
transmitter or repeater. For route diversity and optical flexibility the DLC300 also
features dual optical SFP modules available in WDM, CWDM, or DWDM optical wave-
lengths.Totransportacrossmetroopticalamplifiednetworks,bothscramblingand
dithering of all SDI formats have been included as well as conversion from SMPTE 310M
toDVB-ASI.Costeffective,flexible,andreliable,theDLC300continuesArtel’stradi-
tionofmakingtheworld’smostinnovativeandreliablevideooveropticaltransport
hardware.
Features
Single Card Configurable as:• Transmit(electricaltooptical)• Receive(opticaltoelectrical)• Repeater(opticaltooptical)
Automatic Rate Selection of All Digital Video Formats• 2.967Gb/s3G-SDI(SMPTE424M)• 1.485Gb/sHD-SDI(SMPTE292M)• 270Mb/s - SD-SDI(SMPTE259M-C,ITU656) - DVB-ASI - Artel 270• 19.39Mb/sATSC(SMPTE310M)
Dual SFps for Route Diversity• OperateswithoneortwoSFPs (1310nm, 1550nm, CWDM, DWDM)• SeparatefaultalarmsforeachSFP• ReceiveviaprimaryorsecondarySFP• Automaticswitchoveruponlossofsignal• UserselectablereversiontoprimarySFP
Optional Dithering and Scrambling of all SDI formats• DitheringperSMPTEEG-34• ScramblingcompatiblewithDigiLink
Convert ATSC to DVB-ASI• Transmitter(convertthentransport)• Receiver(receivethenconvert)
Interoperates with• DigiLink1220/2701• OtherDL4000Modules• ITU694.1or694.2OpticalMultiplexers
Flexible Multi-purpose repeater for:DLC100, DLC150E, DLC170, DLC274, DV6000, DL1220, DL2701
non-Video standby signal on loss of video inputgenerates Video test or standby signal for SDI formatsInputs/Outputs• OpticalviaSFPs• Electricalvia75ohmBNC• Inputfromandoutputtoothermodules inDL4000Chassis(viabackplane)
Monitor Options• Frontpanelmonitoringoftransported signal• FrontandrearpanelstatusLEDs
Remote Management via DL-Manager • Noexternalsoftwarerequired• HTTPorSNMPv2• Monitor• Configure• Upgradefirmware
TheDLC300isaflexiblefiberoptictransportmoduleforalldigitalvideoformats
from 19.39Mb/s (ATSC) to 2.97Gb/s (3G-SDI). The DLC300 is a single module,
userconfigurabletofunctionasaTransmitter,Receiver,orRepeaterand
supportsroutediversityaswellasATSCtoDVB-ASIconversion.
DLC300
SFPOptical to Electrical
SFPOptical to Electrical
SFPElectrical to Optical
SFPElectrical to Optical
StandbyVideo
Non-videoStandby
Dither
Scramble
SMPTE to ASI
PowerController Processor
SignalClassification
andReclocking
1
Backplane 2
Backplane 3Backplane 4
Backplane
Digital Video In
Optical in 1
Optical in 2
Backplane 1Backplane 2Backplane 3Backplane 4
Digital Video Output
Monitor
Optical Out 1
Optical Out 2
ManagementInterface
3g-SDI Multi-Rate Digital Video Transmitter/Receiver/Repeater Module
22
DLC300 Specifications
environmentalOperating Temperature of 0 to 50°C DL4000 ChassisAmbient Storage -40 to 80°CTemperatureRelativeHumidity 10to95%(non-condensing)Power Dissipation 6W
physicalDimensions 0.8” x 5” x 10.8”
1 slot in DL4000 chassis
electrical InterfaceSignal Formats2.967Gb/s 3G-SDI (SMPTE 424M)1.485Gb/s HD-SDI(SMPTE292M)270Mb/s SD-SDI(SMPTE259M-C,ITU656) SDTI (SMPTE 305M) DVB-ASI ARTEL 27019.39Mb/s ATSC (SMPTE 310M))Signal Polarity Non InvertingChannels 1-transmit, receive or repeatConnectors Input(1) BNC75ohms Output(1) BNC75ohms Monitor Mini75ohmSMBReturnLoss(Input,Output,Monitor) >15dB,5-1485MHz >10dB,1486-2967MHzCableEqualizationforBelden1694A 0to350meters(270Mb/s) 0 to 140 meters (1.485 Gb/s)
0 to 120 meters (2.967 Gb/s)
Optical protection ModesTransmit Transmit same signal on each SFPReceive PrimaryandsecondarySFPsockets Automatic switchover upon loss of signal UserselectablereversiontoprimarySFP
DLC300Rev1_09-08-24
Front panel monitoring and status displays Electrical Input or output and dual optical transceivers
SDI test or standby signal formats
SD-SDI 525i/29.97 625i/25
HD-SDI 1080i/29.97 1080i/25
3G-SDI 1080P/29.97 1080p/25
SDI signal processing (3g –SDI HD-SDI and SD-SDI)
LSBDitheringperSMPTEEG-34
ScramblingperArtelDigiLinkSpecification
Optical InterfaceArtel Video SFP See SFP Specification Sheet, p. 28
Regulatory Conformance
Compliance:NEBSLevel3,CSA60950,EN60950,EN55022FCCPart15
(Class A), CISPR 22
Ordering InformationDLC300 3G-SDI Multi-rate Digital Video Transmitter/Receiver/Repeater
Model Description Part #
DLC300 3G-SDI Multi-Rate Digital Video 390-008120-00 Transmitter/Receiver/Repeater
SFP Optics
DLS31VX-11 VideoSFP1310nmTransceiver11dB393-021310-11DLS31VX-30 VideoSFP1310nmTransceiver30dB 393-021310-00DLS31VX3G-11 VideoSFP1310nm3GTransceiver11dB 393-051310-11DLS55VX-30 VideoSFP1550nmTransceiver30dB 393-021550-00DLSCxxVX-30 VideoSFPCWDMTransceiver30dB 393-041xx1-00DLSWxxHX-33 VideoSFPDWDMTransceiver33dB 393-240033-xx
Accessories
DL100MC-72 MonitorCable,75-OhmMini-SMB 396-001001-00
toBNC,72”L
Note: Specifications are subject to change without notice.
SFP Optics(Small Form-Factor Pluggable)
23
www.artel.com | 978-263-5775 | [email protected] | [email protected]
When the world is watching, you can depend on Artel
Auniversaldigitalvideolinktestandverificationmodule,theDLC710provides complete,one-touch“go-no-go”performancetestingforallcommonvideorates andformats.Itsuniquedesignallowsforoneormoreformatstobeselected simultaneouslyenablingautomaticverificationofmulti-formatvideolinks.
As a test signal generator, the DLC710 outputs a continuous video signal of a single selectedformatoratimedsequencethrougheachselectedformat.Whenconfiguredas a monitor for a single format it will continuously monitor live digital video and indicaterateandphysicallayersignalquality.Withmorethanoneformatselected themoduleautomaticallyverifieseachratehasbeenreceived.Withthisunique multi-purposemoduleverificationofamulti-servicevideolinkcanbeperformedin lessthanfiveminutes.Additionally,theDLC710canmonitorlivedigitalvideoandindicaterateandphysicallayersignalquality.
TheDLC710isanidealsolutionforbothinitiallinkverificationandde-buggingoffaultydigital video circuits.
FeaturesSingle module provides generation and verification analyzing for:• 2.976Gb/s3G-SDI(SMPTE424M) • 1080p/60 • 1080p/59.94 • 1080p/50• 1.485Gb/sHD-SDI(SMPTE292M) • 1080i/29.97 • 1080i/25 • 720p/59.94 • 720p/50 • 720p/30 • 720p/29.97 • 720p/25• 270Mb/sSD-SDI(SMPTE259M) • 525i/29.97 • 625i/25• 270Mb/sDVB-ASI• 19.39Mb/sATSC(SMPTE310M)Video generator Functions • UserselectableRatesandFormats• SDIColorBarsandPathological Test Signals with Audio Tone• StoredMPEGVideoStream• Automaticallysequencesthrough all selected formats • OutputtoBNCandChassisBackplaneVideo Monitor Functions• TestforEDH,CRC,andBER(bitbybit)• Automaticallydetectsinputsignal• TestsDVB-ASIandSMPTE310Transport Streams • UserSelectableTestDuration• DVB-ASIInversionDetection• Detectsandverifiesallselectedformats• InputfromBNCorchassisbackplaneRemote Management via DL-Manager™• Noexternalsoftwarerequired• HTTPorSNMPv2• Configure• Upgradefirmware
Multi-Function Digital Video generator and Test Module
Artel’sDLC710isaninnovativeDL4000basedmoduleforsimple,automaticlink
verificationofallstandarddigitalvideoformats.Thesinglemodulefunctionsas
bothasignalgeneratorandtestmonitorfor3G-SDI,HD-SDI,SD-SDI,DVB-ASIand
ATSCandisidealforautomaticverificationofsingleormulti-formatvideolinks.
DLC710
Digital Video Out
Backplane 1Backplane 2Backplane 3Backplane 4
Monitor
ManagementInterface
Configuration
Digital Video In
Backplane 1
Backplane 2
Backplane 3
Backplane 4
Signal Generation
Processor
Format Controland
Sequencer
SourceSelect
SignalDetection and Verification
Front PanelDisplay
DVB-ASI SD-SDI HD-SDI ATSC 3G-SDI
DVB-ASI SD-SDI HD-SDI ATSC 3G-SDI
DL4000 VIDeO TRAnSpORT SYSTeM
24
DLC
170R
ev0_
09-0
8-2
4
DLC710 Multi-Function Digital Video generator and Test Module
Video electrical InterfaceInputs 1BNC75ohms(Rearpanel) Other Modules in DL4000 chassisviabackplane
Outputs 1BNC75ohms(Rearpanel) 1MiniSMB75ohms (Front panel) Other Modules in DL4000 chassisviabackplane
ReturnLoss(Input,Output,Monitor) >15dB5-1485MHz >10dB1486-2967MHz
CableEqualizationforBelden1694A 0to350meters(270Mb/s) 0 to 140 meters (1.485Gb/s) 0 to 120 meters (2.967Gb/s)
Output Amplitude 800mVP-p, ± 10%
Rise/Fall time 270 Mb/s 800ps ±400 1.485 Gb/s < 135ps 2.967 Gb/s < 135ps
GenerationFrequencyStability ±2.5ppmmaximum
Output Jitter* 270 Mb/s < 500 ps p-p 1.485 Gb/s <135 ps p-p 2.967 Gb/s <101 ps p-p
*UsingColorBars,perEG-33
environmentalAmbient Storage -40 to 80°C TemperatureAmbient Operating 0 to 50°C Temperature of DL4000 Chassis RelativeHumidity 10to95%(non-condensing)Power Dissipation 10W
physicalDimensions 0.8” x 5” x 10.8” 1 slot in DL4000 based chassis
Regulatory ComplianceCompliance: CSA 60950, EN60950, EN55022, FCC Part 15 (Class A), CISPR 22
Ordering InformationDLC710 Digital Video Generator and Monitor
Model Description Part #
DLC710 Multi-Function Digital Video 390-008150-00 Generator and Monitor
DLK710 Multi-Function Digital Video 398-008150-00 Generator and Module Travel Kit
Front Panel Rear Panel
DLC 710Generator/
MonitorE to O O to E
CoaxCoax Optical Fiber Link
Link Under Test
Pre-Installation equipment verification (one or more formats)
In Service Verification and Monitoring
DLC 710Generator E to O O to E
CoaxCoax Optical Fiber Link
Link Under Test
On-site Verification (one or more formats)
DLC 710Monitor
CustomerTerminal
EquipmentE to O O to E
CoaxCoax Optical Fiber Link
Link Under Test
CustomerTerminal
Equipment
DLC 710Monitor
DLC 710Monitor
Monitor Monitor
CustomerTerminal
Equipment
DLC 710Monitor
Customer Equipment Verification
Coax
DLC710 3G ASISD ATSCHD
OK GOODCHKGEN
MON
CLEAR
UTP
DLC710
OK
REC
GEN
EMS
OUT IN
DLC 710Generator/
MonitorE to O O to E
CoaxCoax Optical Fiber Link
Link Under Test
Pre-Installation equipment verification (one or more formats)
In Service Verification and Monitoring
DLC 710Generator E to O O to E
CoaxCoax Optical Fiber Link
Link Under Test
On-site Verification (one or more formats)
DLC 710Monitor
CustomerTerminal
EquipmentE to O O to E
CoaxCoax Optical Fiber Link
Link Under Test
CustomerTerminal
Equipment
DLC 710Monitor
DLC 710Monitor
Monitor Monitor
CustomerTerminal
Equipment
DLC 710Monitor
Customer Equipment Verification
Coax
DLC 710Generator/
MonitorE to O O to E
CoaxCoax Optical Fiber Link
Link Under Test
Pre-Installation equipment verification (one or more formats)
In Service Verification and Monitoring
DLC 710Generator E to O O to E
CoaxCoax Optical Fiber Link
Link Under Test
On-site Verification (one or more formats)
DLC 710Monitor
CustomerTerminal
EquipmentE to O O to E
CoaxCoax Optical Fiber Link
Link Under Test
CustomerTerminal
Equipment
DLC 710Monitor
DLC 710Monitor
Monitor Monitor
CustomerTerminal
Equipment
DLC 710Monitor
Customer Equipment Verification
Coax
DLC 710Generator/
MonitorE to O O to E
CoaxCoax Optical Fiber Link
Link Under Test
Pre-Installation equipment verification (one or more formats)
In Service Verification and Monitoring
DLC 710Generator E to O O to E
CoaxCoax Optical Fiber Link
Link Under Test
On-site Verification (one or more formats)
DLC 710Monitor
CustomerTerminal
EquipmentE to O O to E
CoaxCoax Optical Fiber Link
Link Under Test
CustomerTerminal
Equipment
DLC 710Monitor
DLC 710Monitor
Monitor Monitor
CustomerTerminal
Equipment
DLC 710Monitor
Customer Equipment Verification
Coax
DLK710 Kit Includes:•DLC710Multi-FunctionDigitalVideoGeneratorandModule• DL4100SingleSlotChassiswithexternalACPowerSupply• 16.68”x13.06”x4.37”ruggedizedtravelcase• BNCtoBNCMonitorCable(2)• BNCtoMini-SMBMonitorCable• Screwdriver
25
Typical Applications
www.artel.com | 978-263-5775 | [email protected] | [email protected]
When the world is watching, you can depend on Artel
Optical Multiplexers
1310nm
1550nm
Common
DLOW1
Common
DLOC8
1471nm
1491nm
1511nm
1531nm
1551nm
1571nm
1591nm
1611nm
Expansion Port
Expansion Port
Common
DLOD421
Common50%
50%
DLOS2
WDM SPLITTER
DWDMCWDM
21
22
23
24
DWDM, CWDM and WDM Optical Multiplexing ModulesDL4000 VIDeO TRAnSpORT SYSTeM
Artel’s DWDM, CWDM and WDM modules create a comprehensive set of optical
multiplexing solutions for the DL4000 Video Transport System. These modules,
inconjunctionwithotherDL4000modulesorthirdpartyequipment,allowthe
creationofflexible,spaceandfiberefficientopticalnetworks.
Arteldesigneditsopticalmultiplexingproductstoaddresstheissueofspaceandfiber
constraint.Forspaceefficiency,eachmoduletakesonlyonebayinaDL4000based
chassis.Utilizingindustrystandardopticalfiltersplusadditionalexpansionport,or
complexopticalnetworkscanbecreated.Completelypassive,anddesignedwiththe
latestopticalfilters,Artel’sDWDM,CWDMandWDMmodulesareextremelyreliable,
cost effective, and feature low insertion losses.
26
FeaturesSingle Slot Modules*
Optical Multiplexing Features• Enablesupto160videoservices overasinglefiber• Bi-Directional• Passivedesignforreliability• IndustryStandardITUwavelengths• IndustryStandardLC/PCConnectors• Modulesincludeexpansionport (passes all other wavelengths)• LowOpticalLosses• CompatiblewithDL4000,DL4042, DL4100, and DL4000P chassis
DWDM Features• IndustrystandardITUG.694.1wavelengths• Opticallymultiplexupto40channels onasinglefiber• 8wavelengthsplusexpansionport per module• Interconnectmodulesforupto 32 channels in a DL4000 Chassis• 20and40Channelversionsusesingle rackunitintegratedchassis
CWDM Features• IndustrystandardITUG.694.2wavelengths• Upto8wavelengthsplusexpansionport per module• Multiple4Channeloptions • Low (1471nm, 1491nm, 1511nm, 1531nm) • High(1551nm,1571nm,1591nm,1611nm) • Mid (1511nm, 1531nm, 1571nm, 1591nm) • Outer (1471nm, 1491nm, 1591nm, 1611nm)
WDM Features• 1310nmand1550nmcombiner/splitters• Singleordualmodularversions• Externalversionconserveschassisslot
*20and40Channelmodelsareintegratedintoa1RUchassis
WD
MR
ev6
_09
-08
-24
27
WDM Ordering Information and Specifications | 1310nm and 1550nm
Model # Description Part # # Channels Channels Insertion Loss Isolation Return Loss Insertion Loss
Upgrade Port
DLOW1 Single WDM 390-008754-01 2 1310, 1550 ≤1.3dB ≥30dB ≥40dB ≤2.1dBDLOW2 Dual WDM 390-008754-02 2 1310, 1550 “ “ “ “
DLOWE External WDM 390-008790-15 2 1310, 1550 “ “ “ “
CWDM Ordering Information and Specifications | Channels 1471 through 1611 of ITU g694.2
Model # Part # # Chans Channels Insertion Loss(±7.0 nm)
Isolation(±7.0 nm) Directivity Return
LossInsertion Loss Upgrade Port
DLOC4L 390-008752-00 4 1471, 1491, 1511, 1531 ≤2.1dB ≥30dB ≥40dB ≥40dB ≤2.1dBDLOC4M 390-008752-01 4 1511, 1531, 1551, 1571 “ “ “ “ “
DLOC4H 390-008752-02 4 1551, 1571, 1591, 1610 “ “ “ “ “
DLOC40 390-008752-03 4 1471,1491, 1591, 1611 “ “ “ “ “
DLOC8 390-008752-04 8 1471, 1491, 1511, 1531, 1551, 1571, 1591, 1611 ≤3.2dB “ “ “ “
DWDM Ordering Information and Specifications | Channels 21 through 60 of ITU g694.1
Model # Part # # Chans Channels Insertion Loss
(±0.11 nm)Passband
Flatness (±0.11 nm)Isolation
(±0.11 nm) Directivity Return Loss Uniformity Insertion Loss
Upgrade Port
DLOD421 390-008762-21 4 21, 22, 23, 24 ≤2.4dB ≤0.5dB ≥25dB ≥40dB ≥40dB ≤1.0dB ≤1.7dBDLOD425 390-008762-25 4 25, 26, 27, 28 “ “ “ “ “ “ “
DLOD429 390-008762-29 4 29, 30, 31, 32 “ “ “ “ “ “ “
DLOD433 390-008762-33 4 33, 34, 35, 36 “ “ “ “ “ “ “
DLOD437 390-008762-37 4 37, 38, 39, 40 “ “ “ “ “ “ “
DLOD441 390-008762-41 4 41, 42, 43, 44 “ “ “ “ “ “ “
DLOD445 390-008762-45 4 45, 46, 47, 48 “ “ “ “ “ “ “
DLOD449 390-008762-49 4 49, 50, 51, 52 “ “ “ “ “ “ “
DLOD453 390-008762-53 4 53, 54, 55, 56 “ “ “ “ “ “ “
DLOD457 390-008762-57 4 57, 58, 59, 60 “ “ “ “ “ “ “
DLOD821 390-008763-21 8 21thru28@100GHzSpacing ≤3.5dB “ “ “ “ “ ≤2.9dB
DLOD829 390-008763-29 8 29thru36@100GHzSpacing “ “ “ “ “ “ “
DLOD837 390-008763-37 8 37thru44@100GHzSpacing “ “ “ “ “ “ “
DLOD845 390-008763-45 8 45thru52@100GHzSpacing “ “ “ “ “ “ “
DLOD853 390-008763-53 8 53thru60@100GHzSpacing “ “ “ “ “ “ “
DLOD2021* 390-008766-21 20 21-40@100GHzSpacing ≤4.6dB “ “ “ “ “ ≤4.0dB
DLOD2041* 390-008766-41 20 41-60@100GHzSpacing “ “ “ “ “ “ “
DLOD4021* 390-008767-21 40 21-60@100GHzSpacing ≤6.1dB “ “ “ “ “ N/A
*Integrated one piece chassis
Dual Window Wide Band Optical Splitters Ordering Information and SpecificationsModel # Description Part # Port 1 | Ratio | Port 2 Port 1 | Insertion Loss | Port 2
DLOS2 50/50 Optical Splitter 390-008753-00 50% 50% 4.0dB 4.0dB
DLOS2-01 1/99 Optical Splitter 390-008753-01 1% 99% 23.0dB 1.0dB
DLOS2-05 5/95 Optical Splitter 390-008753-05 5% 95% 15.0dB 1.0dB
DLOS2-10 10/90 Optical Splitter 390-008753-10 10% 90% 12.0dB 1.5dB
DLOS2-20 20/80 Optical Splitter 390-008753-20 20% 80% 8.5dB 2.0dB
DLOS2-30 30/70 Optical Splitter 390-008753-30 30% 70% 6.5dB 2.5dB
DLOS2-40 40/60 Optical Splitter 390-008753-40 40% 60% 5.0dB 3.5dB
www.artel.com | 978-263-5775 | [email protected] | [email protected]
When the world is watching, you can depend on Artel
Small Form-Factor pluggable (SFp) Optics Overview
Artel’s DL4000 Video Transport System uses Small Form-Factor Pluggables optics
(SFPs) to provide flexibility in the provisioning function modules. SFPs include
both an optical transmitter and a receiver, and use standard LC/PC connectors.
DL4000 VIDeO TRAnSpORT SYSTeM
DL4000 function modules use a common set of SFPs featuring WDM,
CWDM, DWDM transmitters and wide-band receivers with optical budgets
to34dB.Thisenablesavarietyofflexibledeploymentswithsignificantlyless
stockedopticalcomponents.ExternallyaccessibleSFPsmakedeployingand
modifyingopticalnetworksasimpleprocesstakingonlysecondswithout
tools.CompatibilitywithDL4000,MegaWavandotherITUG694standard
multiplexersallowcreationofflexiblefiberefficientopticalnetworks.
Features
Industry Standard SFp TransceiversTransmit and Receive in one flexible unit
Formats Supported:• 2.976Gb/s3G-SDI(SMPTE424M)• 1.485Gb/sHD-SDI(SPMTE-292)• SD-SDI(SMPTE259M-CITU656)• SDTI(SMPTE305M)• DVB-ASI• Artel270• 19.39Mb/sATSC(SMPTE310M)• 10/100/1000Ethernet
Industry standard wavelengths• 1310nm• 1550nm• CWDM(ITUG.694.2) • DWDM(ITUG.694.1)
Up to 34dB loss budget LC/pC Optical Connectors Compatible with:• DL4000OpticalFilters• MegaWav• OtherITUG.694StandardFilters
WDM and CWDM support transmission and reception of SDI and HD-SDI pathological patterns
SFp
28
CompatibilityModel DLS31VX-11 DLS31VX3G-11 DLS31VX-30 DLS55VX-30 DLSCxxVX-30 DLSWxxHX-33
DLC100 P P P P P
DLC100T N/A N/A N/A N/A N/A N/A
DLC150E P P P P P
DLC170AD P P P P P P
DLC170DA P P P P P P
DLC270 P P P P P P
DLC200 P P P P P P
DLC274M/D P P P P P P
DLC300 P P P P P P
DLC710 N/A N/A N/A N/A N/A N/A
Note 1: Excluding 3G ModeNote 2: Excluding Native SDI Modes
(1) (1) (1) (1)
(2)
(2)
1310nm Short Range WDM CWDM DWDM
Model DLS31VX-11 DLS31VX3G-11 DLS31VX-30 DLS55VX-30 DLSCxxVX-30 DLSWxxHX-33
Optical Budget 11dB 11dB 30dB 30dB 30dB 33dB
Transmitter
Wavelength 1310nm ± 30nm 1310nm ±30nm 1310nm ±30nm 1550nm ±40nm
ITUG.694.2 Standard
1427 through 1611 ±6.5nm
ITU-TG.694.1Standard
Channels 21-60
Optical Output Power (Min) -7dBm -7dBm 0dBm 0dBm 0dBm +4dBm
Optical Output Power (Max) 0dBm 0dBm +3dBm +3dBm +3dBm +7dBm
Spectral Width 3nm 3nm 1nm 1nm 1nm .4nm
Dispersion Penalty N/A N/A N/A 1dB@120km 2dB@120km 1dB@120km
Receiver
Receiver Sensitivity -18dBm -18dBm -30dBm -30dBm -30dBm -29dBm
Maximum Input 0dBm 0dBm -9dBm -9dBm -9dBm -9dBm
Input Wavelength 1270 to 1610nm 1270 to 1610nm 1250 to 1620nm 1250 to 1620nm 1250 to 1620nm 1250 to 1620nm
BitErrorRate 10-13 10-13 10-13 10-13 10-13 10-13
MaximumBit-Rate 1.5Gb/s 3Gb/s 1.5Gb/s 1.5Gb/s 1.5Gb/s 3Gb/s
SFPRev1_09-08-13
Small Form-Factor pluggable (SFp) Optics Specifications
WDM Video Transceiver (30dB)
Model Optical Wavelength Part #
DLS31VX-30 1310nm 393-021310-00
DLS55VX-30 1550nm 393-021550-00
Short Range
Model Optical Wavelength Part #
DLS31VX-11 1310nm 393-021310-11
DLS31VX3G-11 1310nm 393-051310-11
CWDM Video Transceiver (30dB)
Model Channel Optical Part #
Number Wavelength
DLSC27VX-30 27 1427nm 393-041427-00 DLSC29VX-30 29 1429nm 393-041429-00 DLSC31VX-30 31 1431nm 393-041431-00 DLSC33VX-30 33 1433nm 393-041433-00 DLSC35VX-30 35 1435nm 393-041435-00 DLSC37VX-30 37 1437nm 393-041437-00 DLSC39VX-30 39 1439nm 393-041439-00 DLSC41VX-30 41 1441nm 393-041441-00 DLSC43VX-30 43 1443nm 393-041443-00 DLSC45VX-30 45 1445nm 393-041445-00DLSC47VX-30 47 1471nm 393-041471-00 DLSC49VX-30 49 1491nm 393-041491-00 DLSC51VX-30 51 1511nm 393-041511-00 DLSC53VX-30 53 1531nm 393-041531-00 DLSC55VX-30 55 1551nm 393-041551-00 DLSC57VX-30 57 1571nm 393-041571-00 DLSC59VX-30 59 1591nm 393-041591-00 DLSC61VX-30 61 1611nm 393-041611-00
DWDM Transceiver (33dB)
Model Channel Freq Approx Center Part # Number (THz) Wavelength (nm)
DLSW21HX-33 21 192.1 1560.61 393-240033-21DLSW22HX-33 22 192.2 1559.79 393-240033-22DLSW23HX-33 23 192.3 1558.98 393-240033-23DLSW24HX-33 24 192.4 1558.17 393-240033-24DLSW25HX-33 25 192.5 1557.36 393-240033-25DLSW26HX-33 26 192.6 1556.55 393-240033-26DLSW27HX-33 27 192.7 1555.75 393-240033-27DLSW28HX-33 28 192.8 1554.94 393-240033-28DLSW29HX-33 29 192.9 1554.13 393-240033-29DLSW30HX-33 30 193.0 1553.33 393-240033-30DLSW31HX-33 31 193.1 1552.52 393-240033-31DLSW32HX-33 32 193.2 1551.72 393-240033-32DLSW33HX-33 33 193.3 1550.92 393-240033-33DLSW34HX-33 34 193.4 1550.12 393-240033-34DLSW35HX-33 35 193.5 1549.32 393-240033-35DLSW36HX-33 36 193.6 1548.51 393-240033-36DLSW37HX-33 37 193.7 1547.72 393-240033-37DLSW38HX-33 38 193.8 1546.92 393-240033-38DLSW39HX-33 39 193.9 1546.12 393-240033-39DLSW40HX-33 40 194.0 1545.32 393-240033-40DLSW41HX-33 41 194.1 1544.53 393-240033-41DLSW42HX-33 42 194.2 1543.73 393-240033-42DLSW43HX-33 43 194.3 1542.94 393-240033-43DLSW44HX-33 44 194.4 1542.14 393-240033-44DLSW45HX-33 45 194.5 1541.35 393-240033-45DLSW46HX-33 46 194.6 1540.56 393-240033-46DLSW47HX-33 47 194.7 1539.77 393-240033-47DLSW48HX-33 48 194.8 1538.98 393-240033-48 DLSW49HX-33 49 194.9 1538.19 393-240033-49DLSW50HX-33 50 195.0 1537.40 393-240033-50 DLSW51HX-33 51 195.1 1536.61 393-240033-51DLSW52HX-33 52 195.2 1535.82 393-240033-52 DLSW53HX-33 53 195.3 1535.04 393-240033-53 DLSW54HX-33 54 195.4 1534.25 393-240033-54 DLSW55HX-33 55 195.5 1533.47 393-240033-55 DLSW56HX-33 56 195.6 1532.68 393-240033-56 DLSW57HX-33 57 195.7 1531.90 393-240033-57 DLSW58HX-33 58 195.8 1531.12 393-240033-58 DLSW59HX-33 59 195.9 1530.33 393-240033-59 DLSW60HX-33 60 196.0 1529.55 393-240033-60
Ordering Information
29
www.artel.com | 978-263-5775 | [email protected] | [email protected]
When the world is watching, you can depend on Artel
DLM130EMSRev3_09-04-02
SnMp v2 and Web Monitoring and Management of:• DL4000Chassis• PowerSupplies• FunctionModules
Monitoring• Autodetectcardsandconfigurations• Majorandminoralarmsandevents• Detailedcardstatus• Alarmstatus• Alarmdetails• Receivelightlevels• Temperature• Videostatusandrates• Errorlogs
provisioning• Overrideonboardswitchsettings• Enableanddisabletransportmodes and channels
Maintenance• Download/upgradefirmwareonline cards,powersuppliesandbackplane• Download/upgrademanagement software
DL-Manager™element Management System (eMS) Module
DL-ManagerisanHTTPorSNMPv2basedElementManagementSystemformoni-
toring and managing the DL4000 chassis and function modules. Embedded in the
DL4000chassis,powersupplyandfunctionmodules,DL-Managerrequiresnoexter-
nalsoftwaretomonitor,overrideonboardswitches,orconfigureaDL4000system.
Usingindustrystandardrouters,multiplechassiscanbemonitoredthroughasingle
ethernet connection.
DL4000 VIDeO TRAnSpORT
Shelf View with Alarms
Power Supply StatusModule configuration override
Module View
Configuring the DLM130
30
(RX)Ethernet (TX)
ManagementInterface
Power toModules
PowerConversion
ManagementProcessor
PHY
Power Monitoring& Cooling Control
Input Power
Integrated Management and power in One Slot
DL Monitor Access for:• DL4000chassis
• Functionmodules
• OtherPowerSupplyinchassis
10BaseT/100BaseTX ethernet Interface:• TCP/IPprotocol
• 10/100autonegotiation
• Autofull-duplexandhalf-duplexauto negotiation
• RJ45connector
Space efficient• Noslotoverheadwithintegratedpower and management in one slot
Rear panel status LeDs• AlarmStatus
• EMSsoftwarestatus
DL-Manager eMS Module with power Supply
The DLM130 is an innovative Element Management System and Power Supply
module for the DL4000. Taking a single power supply slot in the DL4000 chassis,
the DLM130 provides power as well as access to on board DL-Manager Element
ManagementSystemviaa10BaseTEthernet.
DLM130
environmentOperating Temperature 0 to 50°C of DL4000 Chassis
Ambient Storage -40 to 80°C Temperature
RelativeHumidity 10to95%(non-condensing)
Power Dissipation 8W
physicalDimensions 1.6” x 3.5” x 9.5” 1 power supply slot in DL4000 chassis
electrical InterfaceConnector RJ45Data Rates 10Mb/s 100Mb/s CableEqualization 0to100meters(10Mb/s,100Mb/s)
SnMpStandard MIBII
powerDC Specifications (with dual power supplies)Voltage -40 to -70 VDCPower Consumption 60 Watts (max.)BTU/hr 205
AC Specifications (with dual power supplies using DLM130P AC Adapter)
Voltage 90to254VACat50or60HzPower Consumption 75 Watts (max.)BTU/hr 257
Regulatory ConformanceCompliance:NEBSLevel3,CSA60950,EN60950,EN55022, FCC Part 15 (Class A), CISPR 22
Ordering InformationPower Supplies
Model Description Part #
DLM130 EMS Management Module with 390-008090-00 Power Supply
DLM130P AC Adapter for EMS Management Module 390-008091-00
DLM130A EMS Management Module with 390-008095-00 Integrated Power Supply and AC Adaptor
Specifications are subject to change without notice.
DLM130 eMS Management Module with power Supply Specifications
DLManagement_09-04-06
31
www.artel.com | 978-263-5775 | [email protected] | [email protected]
When the world is watching, you can depend on Artel
DL4000 VIDeO TRAnSpORT SYSTeM Contact Alarm ModulesDLM010 and DLM020
Single card in either power supply or function module slot:• Twothree-terminalalarmrelay contact closures—one each for MajorandMinorAlarms
• Allowsremotemonitoringof DL4000 alarm conditions
• Canbewiredasnormallyclosed (NC), or normally open (NO)
TheDLM010andDLM020providecontactclosuresignalingofMajorAlarmand
Minor Alarm from the DL4000 chassis. The DLM010 occupies one power supply slot.
The DLM020 occupies one function module slot.
Major Alarm
Minor Alarm
PowerController
RelayNCCNO
RelayNCCNO M
ajo
r
Min
or
Bac
kpla
ne
DLM010
DLM020
Ordering InformationModel Description Part #
DLM010 Contact Alarm Module for Power Supply Slot 390-008008-00
DLM020 Contact Alarm Module for Function Modules Slot 390-008009-00
Specifications:Inputs/Outputs• Two-piece,six-terminallockingstrip• 48VACor48VDC@100mA• Isolatedfromchassis• 100 VDC maximum applied voltageRegulatory Conformance Compliance:NEBSLevel3,CSA60950,EN60950, EN55022, FCC Part 15 (Class A), CISPR 22
DLM010/DLM020_09/03/24
32
www.artel.com | 978-263-5775 | [email protected] | [email protected]
When the world is watching, you can depend on Artel
Accessories
DL4000Accessories_09/08/10
DL4000 VIDeO TRAnSpORT SYSTeM
Ordering InformationSingle Mode Optical Panel Patch Cords
Model Description Part #
FOCBLSCSC FiberOpticCable,SC/PCtoSC/PC,3MetersSimplex3.0mm 396-330130-00FOCBLSCFC FiberOpticCable,SC/PCtoFC/PC,3MetersSimplex3.0mm 396-340130-00FOCBLSCLC FiberOpticCable,SC/PCtoLC/PC,3MetersSimplex3.0mm 396-350130-00FOCBLFCFC FiberOpticCable,FC/PCtoFC/PC,3MetersSimplex3.0mm 396-440130-00FOCBLFCLC FiberOpticCable,FC/PCtoLC/PC,3MetersSimplex3.0mm 396-450130-00FOCBLLCLC FiberOpticCable,LC/PCtoLC/PC,3MetersSimplex3.0mm 396-550130-00 FOCBLASCLC FiberOpticCable,SC/APCtoLC/PC,3MetersSimplex3.0mm 396-650130-00
23” Mounting Hardware for DL4000 and DigiLink
Mini 75-ohm SMB to BNC
Single Mode Optical Panel Patch Cords
BNC to BNC Cable, 72” L
33
DL4100 Travel Case
DL4100 Travel Case
Model Description Part #
DL4100TC DL4100TravelCase(HoldsuptotwoDL4100Chassis 399-101000-00 and Power Supplies
BNC to BNC Cable
Model Description Part #
DLBNC-72 BNCtoBNCCable,72”,MaletoMale,RG179B/U 396-001030-00
Mini SMB to BNC Cable
Model Description Part #
DL100MC-72 MonitorCable,Mini75-ohmSMBtoBNC,72”L 396-001001-00
23” Mounting Hardware for DL4000 and DigiLink
Model Description Part #
MT23KIT MountingkitforDL4000ChassisandDigiLink 390-000314-00
Artel Video Systems Corp. |330CodmanHillRoad|Boxborough,MA01719USAT: 978.263.5775 | F: 978.263.9755 |DomesticSales:[email protected] InternationalSales:[email protected]|TechnicalSupport:[email protected]