diy project -

Download DIY PROJECT  -

If you can't read please download the document

Post on 30-Dec-2015

40 views

Category:

Documents

1 download

Embed Size (px)

DESCRIPTION

DIY PROJECT -. LVAD SHOWER BAG HOOK-UP. TIME: UNDER 1 HOUR DIFFICULTY: EASY / MODERATE PRICE RANGE: UNDER $20 AT YOUR LOCAL HARDWARE STORE IN THIS PROJECT, I WILL OUTLINE THE STEPS SPECIFIC TO MY APPLICATION – THE MATERIALS AND TOOLS I USED, FOR THE PURPOSE OF GIVING YOU AN IDEA. - PowerPoint PPT Presentation

TRANSCRIPT

Slide 1

DIY PROJECT - LVAD SHOWER BAG HOOK-UP

TIME: UNDER 1 HOUR DIFFICULTY: EASY / MODERATE PRICE RANGE: UNDER $20 AT YOUR LOCAL HARDWARE STORE IN THIS PROJECT, I WILL OUTLINE THE STEPS SPECIFIC TO MY APPLICATION THE MATERIALS AND TOOLS I USED, FOR THE PURPOSE OF GIVING YOU AN IDEA. MAYBE SOMETHING SIMILAR TO GET DESIRED OUTCOME FOR YOUR SITUATION. PLEASE NOTE THAT WHILE IT ISN'T TOO DIFFICULT OF A TASK TO INSTALL CEILING HOOKS, YOU DO HAVE TO MAKE SURE YOU INSTALL THE RIGHT ONES, THE RIGHT WAY, SO THAT YOU DON'T RISK INJURING YOURSELF OR ESPECIALLY YOUR LOVED ONES SHOULD THE CEILING HOOK NOT HOLD AND FALL.

TOOLS USED: TAPE MEASUREPENCIL MARKER STUD FINDERSTEP LADDER DRILLAUGER BIT

I BOUGHT THESE AT A LOCAL HARDWARE STORE (LOWES)PICTURES ARE FOR VISUAL AID ONLY AND DO NOT INDICATE ACTUAL MATERIALS BOUGHT BUT ARE VERY SIMILAR MATERIALS LISTED I ONLY USED AND RECOMMEND INDUSTRIAL GRADE OR HEAVY DUTY MATERIALS FOR OBVIOUS REASONS

1. TOGGLE BOLT IF STUD NOT AVAILABLE, ANCHOR NEEDED.2. EYE BOLT (MATCHING ANCHOR DIA)3. CARABINER BUNGEE CORD STEP BY STEP DETERMINE CEILING HOOK MOUNT LOCATIONWORKING ON A 4 X 4 SHOWER STALL WITH SLIDING DOORSTANDING OUTSIDE THE SHOWER STALL - SHOWER HEAD FACING TO THE RIGHTLVAD DRIVELINE ON THE RIGHT SIDE OF THE BODYCEILING HOOK MOUNT NEEDED TO BE ON THE CENTER OF THE RIGHT QUADRANT OF THE CEILING DIVIDE CEILING INTO 9 EQUAL QUADRANTS SEE DIAGRAMMARK SPOT ON CENTER OF LOWER MIDDLE QUADRANTIF STUD IS NOT FOUND IN THE VICINITY OF THE SPOTUSE INDUSTRIAL GRADE ANCHORI PREFER TOGGLE ANCHORS AS THEY ARE MORE SECUREYOU MAY NEED TO USE WASHER TO COVER DRILLED HOLE FOR A MORE PROFESSIONAL LOOKDRILL USE CORRECT DRILL BIT FOR ANCHOR YOU WILL USEAS MENTIONED, I USED AN AUGER DRILL BIT FOR THE TOGGLE BOLT AND WASHERASSEMBLE THE EYE HOOK AND ANCHOR BEFORE INSERTING INTO HOLEAS YOU TIGHTEN THE BOLT, ANCHOR WILL SPREAD OUT INSIDECLIP ON INDUSTRIAL STRENGTH BUNGEE CORD USING CARABINER HOOKS FOR EASY MOUNT AND DISMOUNTADJUST LENGTH AS NECESSARYIF CORD IS LONGER THAN NEEDED, IT CAN ALWAYS BE DOUBLE LOOPED TO MAKE IT SHORTER IN LENGTH

Heartmate gogear shower bag

Before install

It is very important that the shower bag mounted to the bungee cord IS high enough that the driveline loop from the exit site to the bag is higher. You dont want water to seep in to the bag via gravity after installINSPIRED BY AND DEDICATED TO MY PARTNER IN LIFE, MY LOVELY WIFE, SUZANNE!YOU ALWAYS HAVE MY HEART,CRIS

Recommended

View more >