Providing contractors with a superior and economic product for rooftop conduit support. Rooftop Sleeper Support's new RSS4 product will withstand extreme temperature swings, rain, ultraviolet light and wind while providing a safe and reliable support for conduit while protecting the membrane on commercial rooftops. Made in the U.S.A. of 100% recycled PVC, the RSS4 conduit support comes in a white color to match the trend in commercial roo�ng to energy e�cient white re�ective roofs that reduce building energy consumption and decrease the e�ects of urban heat islands and air pollution.

S L E E P E R S U P P O R T

DIVISION OF MIRO

RSS4

Installation Procedures:

1. Cut support to desired length. 2. Clear area around rooftop support. 3. Place support under pipe at 10’ on center or closer depending on weight of pipe. 4. Pipe should be clamped loosely by a pipe clamp, pipe guide, or other suitable fastener.

RSS4

S L E E P E R S U P P O R T

DIVISION OF MIRO

The RSS4 product is designed for easy rooftop conduit and condensate pipe support and helps protect against roof penetrations and damage to other rooftop material.

Rooftop Sleeper Support, Inc.2700 South 900 West, Ste. 101Salt Lake City, Utah 84119Phone: 801-975-8885Fax: 801-975-6351sales@rooftopsleepersupport.comwww.rooftopsleepersupport.com

• The RSS4 is made out of 100% recycled PVC and will support a variety of small conduit and condensate piping.• RSS4 comes in a reflective white color to match the trend in commercial roofing to energy efficient white reflective roofs that reduce building energy consumption.• Superior alternative to wood blocks. The RSS4 has smooth, rounded edges that will not crack, warp, blister and damage the rooftop membrane.• Lightweight design makes for easy transport to the job site.• Quick, easy installation.• Backed by a 2 year limited warranty.

Rooftop Sleeper Support Inc. 2700 South 900 West, Ste. 101

Salt Lake City, UT 84119

Geon Vinyl Dry Blend E1344

3 ½” High x 4’ Long, designed to be cut down to a length of 6” or longer NOTE: Individual support pieces cannot be less than 6”

NOTE: Do not cut RSS4 product directly on roof membrane surface

3 ½” off roof membrane

Not to exceed 50 lbs per 6” or a maximum of 2.5 PSI

Should not exceed 10’ on center, closer depending on weight of pipe Each support should be spaced evenly

2 Year

Manufacturer

Material Specificationsand Composition Size

Max Pipe Clearance Max Load Weight Spacing

Warranty