diversified plastics, inc. diversified plastics, inc., ... molded products. complete urethane...
TRANSCRIPT
DIVERSIFIED PLASTICS, INC. E
ngineered Plastic P
ower Transm
ission Products
2009-2010
3721 Grant Creek Road • Missoula, Montana 59808Phone (406) 543-6653 • Fax (406) 728-4074 • Toll Free (800) 321-0084
E-mail [email protected]
VI
IntroductIon .............................................. 1-3
BearIngs & BushIngs ................................. 4Pillow Block Bearing ............................................................................... 5Stainless Steel Shaft Protector Inserts ............................................... 6Flange Bearings 2-Bolt & 4-Bolt .......................................................... 7Self-Aligning Bearing Insert ................................................................... 8Self-Aligning Bearing Housings Pillow Block Style ......................... 9Self-Aligning Bearing Housings 2-Bolt & 4-Bolt Flange ...............10Split Pillow & Split Block Bearing ......................................................11Steel Cap Split Bearings ......................................................................12Split Tipple Bearing ...............................................................................13Bushings (Cylindrical Sleeves) ...........................................................14Bushings (Flanged) ...............................................................................15Kiln Cart Bushings .................................................................................16Dryer Hanger Bearing ...........................................................................17Hanger Bearings ....................................................................................18Roll End Bearings ........................................................................... 19-21Stainless Steel Hex Shaft Adapter ....................................................22
drIve components..................................... 23sprockets ........................................................................................ 23
Plastic Roller Chain ........................................................................ 24-25Roller Chain Sprockets .................................................................. 26-30Solid Torque Drives™ ............................................................................31Drive Hubs - Roller Chain Sprockets & Gears ................................32AG Chain Sprockets .............................................................................33Flat-Top Conveyor Sprockets ....................................................... 34-35Flat-Top Idler Wheels .............................................................................36Mill Chain Sprocket ...............................................................................37Drag Chain Sprocket ............................................................................38Drag Chain Idler Drums ........................................................................39
gears ..................................................................................................40Spur Gears ..............................................................................................41Gear Racks ..............................................................................................42
BeltIng & accessorIes .............................................................. 43B7 Series Plastic Modular Belting .....................................................44B8 Series Plastic Modular Belting .....................................................45B9 Series Plastic Modular Belting .....................................................46B13 Series Plastic Modular Belting ..................................................47
B14 Series Plastic Modular Belting ..................................................48B15 Series Plastic Modular Belting ..................................................49B16 Series Plastic Modular Belting ..................................................50
Belt pulleys .................................................................................... 51Timing Belt Pulleys .................................................................................52High Torque (Belt) Drive Sprockets ...................................................53V Belt Sheaves .......................................................................................54Can Line Pulley .......................................................................................55
Wheels & rollers ........................................................................56Wheels & Rollers ....................................................................................57Molded Rollers ........................................................................................58
augers & accessorIes ..............................................................59Industrial Augers ....................................................................................60Industrial Auger Application .................................................................61Auger Trough Liners ..............................................................................62Metering & Spice Augers .....................................................................63Hanger Bearings ....................................................................................64
conveyor Belt accessorIes ...................................................65Rattle Roll .................................................................................................66Impact Conveyor Retro-Fits .................................................................67Vibriatory Conveyor Replacement Springs ......................................68
chaIn guIdes & attachments .................................................69Chain Guide ......................................................................................70-71Thin Gauge Wearstrip ...........................................................................72Fasteners..................................................................................................73Standard UHMW Strip Fastening Recommendations..................74Diversa-Track - Curved & Straight Track for Table Top Chain .....75UHMW Oregon Bend ..........................................................................76Drag Flights (Long Link Chain) ...........................................................77Chain Tops ...............................................................................................78Floatensioner™ Chain Tensioner .........................................................79
polyurethane products .........................80Diversaliner ..............................................................................................81EA-55 Polyurethane ...............................................................................82Spreader Wheels Sand, Salt & Fertilizer ..........................................83Urethane Rolls ........................................................................................84Urethane Wheel Recover .....................................................................85Urethane Crown Pulley .........................................................................86
taBle of contentsEnginEErEd Plastic PowEr transmission Products
products for specIfIc IndustrIes ... 87lumBer mIll ................................................................................... 87
Carriage Wheels ....................................................................................88Carry-Over Wheel ..................................................................................89Diverter Arms ..........................................................................................90Even Ending Roll ....................................................................................91J-Hooks .....................................................................................................92Pusher Lugs ............................................................................................93Roller Lugs & Lug Pins .........................................................................94Slider Blocks ...........................................................................................95Sticker Placement Arms .......................................................................96Swede Roll ..............................................................................................97Tipple Arm ................................................................................................98Veneer & Lumber Cart Wheels ...........................................................99
panel ................................................................................................ 100Forming Line Perforated Plate ..........................................................101Polyurethane Panel Turner Accessories EA-55 Energy-Absorbing ..................................................................102Hot Press Platten Guides .................................................................103Press Charger Star Gears ................................................................104Suction Rings .......................................................................................105Doffing Roll Spacers ..........................................................................106
plyWood .......................................................................................... 107Dryer Hold Down Wheel ...................................................................108Hot Press Platten Guides .................................................................109Raymond Plugger Gears ...................................................................110Rotary Clipper Shear ..........................................................................111Skinner Deck Hold Down Wheel.....................................................112Skoog Plugger Sweeps .....................................................................113Suction Rings .......................................................................................114Veneer & Lumber Cart Wheels ........................................................115Veneer Knockdown Arm ....................................................................116Knock Down Arm Cylinder External Cushion ............................... 117
pulp & paper ..................................................................................118Paper Roll Crane Hook Liners .........................................................119Reel Spool & Roll Cushions .............................................................120Roll Handling Stops & Bumpers ......................................................121Scalping Roll Spacers .......................................................................122Suction Box Cover ..............................................................................123Tidland Core Shaft Cradle ................................................................124Venturi Dampers ..................................................................................125
food .................................................................................................. 126mInIng ..............................................................................................127agrIculture .................................................................................. 128Waste Water treatment ......................................................... 129
Bar Screen Conversion .....................................................................130Grit Collector Conversion .................................................................131Rectangular Sludge Collector ..........................................................132Molded 700 Series Sprockets .........................................................133
Custom 720 Sprockets .....................................................................134Replacement Sprocket Segments ..................................................13578 Series Split Non-Metallic Dished Drive Sprockets ...............136Custom Non-Metallic Drive Sprockets ........................................... 13778 Series Non-Metallic 2.609” Pitch .............................................13878 Series Shear Pin Sprocket 2.609” Pitch .................................139Jaw Clutch Shear Pin Drive Sprocket Assembly .........................140Split Set Collar & Split Static Shaft Sleeve Bushing ..................141“FRP” Sludge Collection Flights .....................................................142Replacement Flight Data ...................................................................143Carry & Return Wear Shoes .............................................................144Flight Filler Blocks ..............................................................................145Wearstrip & Fasteners .......................................................................146Floatensioner™ ..................................................................................... 147Wall brackets .......................................................................................148Take Up Arm .........................................................................................149Chain ......................................................................................................150Non-Metallic Bar Screen Rakes ......................................................151Industrial Augers .................................................................................152Industrial Auger Application ..............................................................153Auger Trough Liners ...........................................................................154Hanger Bearings .................................................................................155Steel Cap Split Bearings ...................................................................156Rattle Roll .............................................................................................. 157Grit Collector ......................................................................................1581900 Ultrahigh Molecular Weight Polymer ...................................159Property Comparison Chart ..............................................................160
gypsum ............................................................................................161Discharge Port .....................................................................................162Hard Edge Port ....................................................................................163Suction Rings .......................................................................................164Transition Boot .....................................................................................165
Index...............................................................166Credit & Returned Goods Policy ..................................................... 167Limited Warranty Disclaimer & Exclusions ....................................168
taBle of contentsEnginEErEd Plastic PowEr transmission Products
1
IntroductIonWe fit your business.
Even the smallest, most inexpensive part affects your bottom line because it impacts your
manufacturing process, your material costs, your pricing, and your ability to meet your own customers’
needs. Choosing the right supplier for custom plastic components can make a big difference in the
success and profitability of your company.
At Diversified Plastics, Inc., we’ve been designing, fabricating and molding plastic parts for a
wide range of industrial and OEM applications since 1976. We’ve become known for
our ability to fulfill unique requests, meet urgent time frames, solve difficult applications, and stay within tight budget
constraints —all while meeting your standards for quality.
While plastic components are often specified to save money, our clients have come to expect more than value. At
Diversified Plastics, we start each project with a question-and-answer phase that ensures we have every scrap of information
we need. Then we use the best minds and best equipment in the industry to deliver components that meet or exceed your
parameters and requirements. We can even combine various processes and materials to create a single part.
With Diversified Plastics, you get more than custom parts that fit your application. You get a manufacturing partner – an
experienced supplier who fits your business.
Diversified Plastics provides custom plastic components throughout the U.S. and abroad.
Our parts fit a variety of applications and industries including:
• food processing
• packaging
• forest products
• agricultural
• manufacturing
• plant maintenance
• and many more.
2 DiversifieD Plastics, inc.
The custom injectionmolding experts.
Large or small,
complicated or simple,
DPI can deliver
the molded plastic
components you need
– on time and on
budget. Our process
begins at ground zero with in-
house design and fabrication of custom tooling and
molds, including low-cost aluminum mold inserts.
Once we’ve created the molds and completed a test run,
we begin full-line production using a variety of materials.
Our state-of-the-art facilities can mold UHMW-PE, Nylon,
urethane, high density polyethylene, polypropylene,
and other engineered industrial resins into virtually
any shape. From entry-level runs of specialty items
to large runs of conventional components, DPI is an
excellent choice for custom injection
molded products.
Complete urethanecasting capability.
Urethane is a remarkable material that can be
cast into shapes, bonded to rolls and wheels, or
poured into plates of varying sizes and thicknesses.
Urethane can be tailored to specific hardnesses,
and it bonds to virtually any metal. When it comes
to versatility it’s in a class all its own. Needless to say,
creating urethane components and sheets is entirely
different from working with traditional plastics. At
DPI, we’ve been working with urethane for years,
and have developed proprietary processes and
protocol for using it. Our urethane parts will meet your
specifications not only for shape
and size, but also
for hardness. In fact, we can
cast urethane components in
durometers from 40A to 75D.
Urethane is endlessly variable. That’s what makes it such a versatile material. Our experienced chemical engineers can formulate urethane to suit virtually any appropriate applica-tion – impact resistant, energy absorbing, sound dampening, high wear, and more.
3
Expertise in fabricationand machining.
In addition to our extensive
molding capabilities, DPI also offers
a full range of plastics fabrication
and machining. Inside our 25,000-square-
foot facility, you’ll find CNC mills, lathes and routers,
along with precise cutting, drilling, welding, bending and
forming equipment. Most important, you’ll find experienced
professionals who know how to use our advanced,
computer-aided
equipment to meet your
exact specifications
regardless of high
or low tolerances.
Your single source for stock materials.
In addition to our custom
capabilities, we also stock
and distribute a wide range
of materials, resins and
components. These “off the shelf”
materials are engineered to a variety of specifications
and come in all standard shapes: sheets, rods, tubes,
strips and profiles. Typically, our in-stock materials
include UHMW-PE (natural, reprocessed, cross-linked,
ceramic-filled, steel-filled), Nylon (natural, Molly-filled,
oil-filled, glass-filled), Delrin, Teflon, Phenolic, urethane,
vinyl and more.
Creating more than parts.
At Diversified Plastics, Inc., our capabilities are as
versatile as our materials. We have the facilities
and experts to meet any need. And we
approach every project with a new-
company attitude that
emphasizes problem solving, critical
thinking and creative ideas. In other
words, we’re as good at creating
solutions as we are at creating parts.
On the floor at Diversified Plastics, high-tech equipment meets years of engineered plastics experience. The result? Molded, fabricated and machined components that meet tight tolerances and demanding specifications for virtually any industrial or commercial application you can name.
4 DiversifieD Plastics, inc.
BearIngs & BushIngs
5
pIlloW Block BearIng
Diversified Plastics Pillow Block Bearings will interchange with most standard units. These bearings excel in wet and corrosive environments where high performance and low maintenance is desired. Many USDA/FDA accepted and custom materials are available to choose from.
MATERIAL CHARTUH Natural UHMWAC Natural AcetalT Virgin TeflonFGN Food Grade Nyloil NL Green Nyloil
Nom. Bore (in) A B C E F G H J K Bolt Size 1/2" 1-3/16" 2-3/16" 1-1/2" 3-3/8" 4-3/4" 5/8" 3/4" 7/16" 7/8" 3/8" 5/8" 1-3/16" 2-3/16" 1-1/2" 3-3/8" 4-3/4" 5/8" 3/4" 7/16" 7/8" 3/8" 3/4" 1-5/16" 2-1/2" 1-1/2" 3-3/4" 5-1/4" 5/8" 3/4" 7/16" 15/16" 3/8" 7/8" 1-7/16" 2-3/4" 1-1/2" 4" 5-1/2" 3/4" 3/4" 7/16" 15/16" 3/8" 1" 1-7/16" 2-3/4" 1-1/2" 4" 5-1/2" 3/4" 3/4" 7/16" 15/16" 3/8" 1-1/8" 1-11/16" 3-1/4" 1-1/2" 4-3/4" 6-1/4" 7/8" 3/4" 9/16" 1-1/16" 1/2" 1-3/16" 1-11/16" 3-1/4" 1-1/2" 4-3/4" 6-1/4" 7/8" 3/4" 9/16" 1-1/16" 1/2" 1-1/4" 1-7/8" 3-5/8" 1-3/4" 5" 6-1/2" 7/8" 7/8" 9/16" 1-1/16" 1/2" 1-3/8" 1-7/8" 3-5/8" 1-3/4" 5" 6-1/2" 7/8" 7/8" 9/16" 1-1/16" 1/2" 1-7/16" 1-7/8" 3-5/8" 1-3/4" 5" 6-1/2" 7/8" 7/8" 9/16" 1-1/16" 1/2" 1-1/2" 2" 4" 1-3/4" 5-3/8" 7" 7/8" 1" 9/16" 1-1/16" 1/2" 1-3/4" 2-1/8" 4-1/4" 2" 5-3/4" 7-1/2" 7/8" 1" 9/16" 1-1/16" 1/2" 1-15/16" 2-1/4" 4-1/2" 2" 6-1/4" 8" 7/8" 1" 11/16" 1-3/16" 5/8" 2" 2-1/2" 5" 2" 6-3/4" 8-3/4" 1" 1" 11/16" 1-5/16" 5/8" 2-3/16" 2-1/2" 5" 2" 6-3/4" 8-3/4" 1" 1" 11/16" 1-5/16" 5/8" 2-1/4" 2-3/4" 5-1/4" 2-1/2" 7-1/2" 9-1/2" 1" 1-1/4" 11/16" 1-5/16" 5/8" 2-3/8" 2-3/4" 5-1/4" 2-1/2" 7-1/2" 9-1/2" 1" 1-1/4" 11/16" 1-5/16" 5/8" 2-7/16" 2-3/4" 5-1/4" 2-1/2" 7-1/2" 9-1/2" 1" 1-1/4" 11/16" 1-5/16" 5/8"
Part #PB2B050PB2B062PB2B075PB2B087PB2B100PB2B112PB2B118PB2B125 PB2B137PB2B143 PB2B150 PB2B175PB2B194PB2B200 PB2B218 PB2B225PB2B237PB2B243
6 DiversifieD Plastics, inc.
staInless steel shaft protector Inserts
Stainless Steel Shaft Protectors and Special InsertsSeries Part No. Shaft
ProtectorOil Filled Insert for
use w/Shaft ProtectorNyloil® Insert & for use
w/ Shaft ProtectorBore OD A L
204 BSSZ2412 BSCi5400 BNFi5400 3/4 1.850 .81 1.44205 BSSZ2513
BSSZ2514BSSZ2515BSSZ2516
BSCi5500 BNFi5500 13/167/8
15/161
2.047 .80 1.50
206 BSSZ2617BSSZ2618 BSSZ2619
BSCi5600 BNFi5600 1-1/161-1/81-3/16
2.441 1.11 1.82
207 BSSZ2720BSSZ2721 BSSZ2722 BSSZ2723
BSCi5700 BNFi5700 1-1/41-5/161-3/81-7/16
2.835 1.14 1.96
208 BSSZ2824BSSZ2825
BSCi5800 BNFi5800 1-1/21-9/16
3.150 1.23 2.03
Stainless Steel Shaft Protector with Nyloil Inserts
7
flange BearIngs 2-Bolt & 4-Bolt
2-Bolt and 4-Bolt Flange Bearings will interchange with most standard Flange Bearing units. These Bearings are ideal for tough environments where high performance and low maintenance is desired. Many USDA/FDA accepted and custom materials are available to choose from.
Material ChartUH Natural UHMWAC Natural AcetalT Virgin TeflonFGN Food Grade Nyloil NL Green Nyloil
2-Bolt Bore A B C D 1/2" 3-7/8" 3" 2-1/8" 1-1/4" 3/4" 4-7/16" 3-9/16" 2-1/2" 1-1/2" 1" 4-15/16" 3-7/8" 2-3/4" 1-1/2" 1-3/16" 5-5/8" 4-5/8" 3-1/4" 1-1/2" 1-1/4" 6-1/8" 5-1/8" 3-5/8" 1-3/4" 1-7/16" 6-1/8" 5-1/8" 3-5/8" 1-3/4" 1-1/2" 6-13/16" 5-5/8" 4" 2"
4-Bolt Bore A B C D 1/2" 3" 1-1/2" 2-1/8" 1" 3/4" 3-3/8" 1-11/16" 2-1/2" 1-1/4" 1" 3-3/4" 1-7/8" 2-3/4" 1-1/4" 1-3/16" 4-1/4" 2-1/8" 3-1/4" 1-1/2" 1-1/4" 4-3/4" 2-1/8" 3-5/8" 1-1/2" 1-7/16" 4-3/4" 2-3/8" 3-5/8" 1-1/2" 1-1/2" 5-1/8" 2-9/16" 4" 1-3/4" 1-15/16" 5-1/2" 2-3/4" 4-3/8" 1-3/4" 2" 6-3/8" 3-3/16" 5-1/8" 1-3/4" 2-7/16" 6-7/8" 3-7/16" 5-5/8" 2"
Part #FB2B050FB2B075FB2B100FB2B118FB2B125FB2B143FB2B150
Part #FB4B050FB4B075FB4B100FB4B118FB4B125FB4B143FB4B150FB4B194FB4B200FB4B243
8 DiversifieD Plastics, inc.
self-alIgnIng BearIng Insert
Diversified Plastics Self-Aligning Bearing Inserts are interchangeable with all standard Pillow Block, Tap Base, Take Up or Flange Bearing Housing. These inserts are excellent in the food and packaging industry and are ideal for replacing rusty roller or ball bearing inserts in corrosive or wet applications and require minimal maintenance. Many FDA accepted materials are available to choose from and “custom” sizes are available.
Shaft Dia.
Part. No Stainless
Steel Insert Boundary Dimensions (inches)
Load Rating (lbf)Dynamic Static
d D B C rsmin S S1 G d4 Cr Cor
3/4 BSSi0012 0.7500 1.8504 1.2205 .6693 .0394 .5000 .7205 .1772 1.1654 2230 15001 BSSi0016 1.0000 2.0472 1.3425 .6693 .0394 .5630 .7795 .1969 1.3346 2430 1770
1-3/16 BSSi0019 1.1875 2.4409 1.5000 .7480 .0394 .6260 .8740 .1969 1.6063 3350 25401-1/4 BSSi0020 1.2500 2.8346 1.6890 .7874 .0591 .6890 1.0000 .2362 1.8425 4430 34401-7/16 BSSi0023 1.4375 2.8346 1.6890 .7874 .0591 .6890 1.0000 .2360 1.8425 4480 34801-1/2 BSSi0024 1.5000 3.1496 1.9370 .8268 .0591 .7480 1.1890 .3150 2.0866 5025 4010
Stainless Steel Ball Bearing Insert
Larger and metric bore sizes also available.
MATERIAL CHARTUH Natural UHMWNL Green NyloilFGN Food Grade NyloilT Teflon
Part # Bearing Style Bore A B
SA050 203 1/2" .875" 1.575"SA062 203 5/8" .875" 1.575"SA075 204 3/4" 1.250" 1.850"SA087 205 7/8" 1.250" 2.047"SA100 205 1" 1.250" 2.047"SA118 206 1 3/16" 1.375" 2.441"SA125 207 1 1/4" 1.500" 2.835"SA143 207 1 7/16" 1.500" 2.835"SA150 208 1 1/2" 1.500" 3.150"SA175 209 1 3/4" 1.500" 3.346"SA187 210 1 7/8" 1.500" 3.543"SA193 210 1 15/16" 1.500" 3.543"
9
self-alIgnIng BearIng housIngs pIlloW Block style
Diversified Plastics non-metallic Self-Aligning Bearing Housings are an excellent replacement for cast iron units. These housings are designed for applications where chemical resistance and easy clean-up or FDA/USDA approval is a necessity. They can be made with or without grease grooves and zirks for plastic or standard self-aligning inserts.
MATERIAL CHARTUH Natural UHMWAC Natural AcetalNy Natural Nylon
Insert Part Housing Bearing # Style Range A B C D E F G H
2BPBSABH 203 203 1/2"-5/8" 7/16" 27/32" 3 5/8" 5 1/16" 1 1/16" 2 1/8" 5/8" 1 1/16"2BPBSABH 204 204 1/2"-3/4" 7/16" 27/32" 3 3/4" 5 1/4" 1 5/16" 2 9/16" 11/16" 1 3/16" 2BPBSABH 205 205 7/8"-1" 7/16" 27/32" 4" 5 1/2” 1 7/16" 2 3/4" 3/4" 1 5/16" 2BPBSABH 206 206 1 1/16-1 1/4" 9/16" 15/16" 4 5/8" 6 1/4" 1 5/8" 3 1/4" 7/8" 1 7/16" 2BPBSABH 207 207 1 1/4"-1 7/16" 9/16" 15/16" 5 1/16" 6 11/16" 1 7/8" 3 3/4" 1 1/16" 1 7/8" 2BPBSABH 208 208 1 1/2"-1 5/8" 9/16" 29/32" 5 1/2" 7 1/4" 2 1/8" 4 3/16" 1 3/16" 2" 2BPBSABH 209 209 1 11/16"-1 3/4" 9/16" 29/32" 5 7/8" 7 7/16" 2 1/8" 4 1/4" 1 5/16" 1 7/8" 2BPBSABH 210 210 1 15/16-2" 11/16" 1 1/32" 6 3/8" 8 1/4" 2 1/4" 4 1/2" 1 7/16" 2 1/4"
B
A
CD
GE
F
H
Different styles & sizes that are not listed can be supplied
10 DiversifieD Plastics, inc.
self-alIgnIng BearIng housIngs 2-Bolt & 4-Bolt flange
AC
FC
E
A
B
D
4-BoltStyle
Insert Housing Bearing Part # Style Range A B C D E F
4BFSABH 203 203 1/2"-5/8" 3" 7/8" 2 1/8" 7/16" 3/8" 1 11/16" 4BFSABH 204 204 1/2"-3/4" 3 3/8" 1" 2 1/2" 7/16" 3/8" 1 15/16"4BFSABH 205 205 7/8"-1" 3 3/4" 1" 2 3/4" 1/2" 7/16" 2 1/16" 4BFSABH 206 206 1 1/16"-1 1/4" 4 1/4" 1 1/16" 3 1/4" 1/2" 7/16" 2 3/16"4BFSABH 207 207 1 1/4"-1 7/16" 4 3/4" 1 3/8" 3 5/8" 9/16" 1/2" 2 7/16" 4BFSABH 208 208 1 1/2"-1 5/8" 5 1/8" 1 3/8" 4" 9/16" 1/2" 2 3/8" 4BFSABH 209 209 1 11/16"-1 3/4" 5 3/8" 1 1/2" 4 1/8" 5/8" 1/2" 2 3/4" 4BFSABH 210 210 1 15/16"-2" 5 5/8" 1 1/2" 4 3/8" 5/8" 1/2" 2 7/8"
Insert Housing Bearing Part # Style Range A B C D E
2BFSABH 203 203 1/2"-5/8" 3 7/8" 3" 2 1/8" 1" 3/8" 2BFSABH 204 204 1/2"-3/4" 4 3/8" 3 17/32" 2 3/8" 1 3/16" 1/2" 2BFSABH 205 205 7/8"-1" 4 7/8" 3 57/64" 2 3/4" 1 3/16" 1/2" 2BFSABH 206 206 1 1/16"-1 1/4" 5 1/2" 4 19/32" 3 1/4" 1 3/8" 1/2" 2BFSABH 207 207 1 1/4"-1 7/16" 6 1/8" 5 1/8" 3 3/4" 1 1/2" 9/16" 2BFSABH 208 208 1 1/2"-1 5/8" 6 3/4" 5 21/32" 4 1/8" 1 5/8" 9/16" 2BFSABH 209 209 1 11/16"-1 3/4" 7 1/16" 5 27/32" 4 3/8" 1 3/4" 5/8" 2BFSABH 210 210 1 15/16"-2" 7 7/16" 6 3/16" 4 9/16" 1 3/4" 5/8"
MATERIAL CHARTUH Natural UHMWAC Natural AcetalNy Natural Nylon
MATERIAL CHARTUH Natural UHMWAC Natural AcetalNy Natural Nylon
Diversified Plastics non-metallic Self-Aligning Bearing Housings are an excellent replacement for cast iron units. These housings are designed for applications where chemical resistance and easy clean-up or FDA/USDA approval is a necessity. They can be made with or without grease grooves and zirks for plastic or stan-dard self-aligning inserts.
2-Bolt
3-Bolt style and different sizes that are not listed can be supplied
11
splIt pIlloW & splIt Block BearIng
Diversified Plastics Split Pillow Block Bearings will interchange with most standard units. These bearings excel in wet and corrosive environments where high performance and low maintenance is desired. Many USDA/FDA accepted and custom materials are available to choose from. If the following sizes below will not meet your needs, ask us about our extensive stock and our custom sizes.
2 BOLT Nom. Bore (in) A B C D E G Bolt Size 1/2" 2-3/16" 1-3/16" 1" 3-3/8" 4-3/4" 1-1/2" 3/8" 5/8" 2-3/16" 13/16" 1" 3-3/8" 4-3/4" 1-1/2" 3/8" 3/4" 2-1/2" 1-5/16" 13/16" 3-3/4" 5-1/4" 1-1/2" 3/8" 7/8" 2-3/4" 1-5/16" 1-5/16" 4" 5-1/2" 1-1/2" 3/8" 1" 2-3/4" 1-7/16" 1-5/16" 4" 5-1/2" 1-1/2" 3/8" 1-1/16" 3-1/4" 1-11/16" 1-9/16" 4-3/4" 6-1/4" 1-1/2" 1/2" 1-1/8" 3-1/4" 1-11/16" 1-9/16" 4-3/4" 6-1/4" 1-1/2" 1/2" 1-3/16" 3-1/4" 1-11/16" 1-9/16" 4-3/4" 6-1/4" 1-1/2" 1/2" 1-1/4" 3-5/8" 1-7/8" 1-3/4" 5" 6-1/2" 1-3/4" 1/2" 1-7/16" 3-5/8" 1-7/8" 1-3/4" 5" 6-1/2" 1-3/4" 1/2" 1-1/2" 4" 2" 2" 5-3/8" 7" 1-3/4" 1/2" 1-3/4" 4-1/4" 2-1/8" 2-1/8" 5-3/4" 7-1/2" 2" 1/2" 1-15/16" 4-1/2" 2-1/4" 2-1/4" 6-1/4" 8" 2" 5/8" 2-1/2" 4" 2-1/4" 1-3/4" 3-1/4" 4-1/2" 1-3/4" 1/2" 3" 4-1/2" 2-1/4" 2-1/4" 3-3/4" 5" 1-3/4" 1/2"
Part # PBS2B050PBS2B062PBS2B075PBS2B087PBS2B100PBS2B106PBS2B112PBS2B118PBS2B125PBS2B143PBS2B150PBS2B175PBS2B194PBS2B250PBS2B300
12 DiversifieD Plastics, inc.
steel cap splIt BearIngs
Diversified Plastics Steel Capped Split Pillow Block Bearings are designed to outlast conventional babbitt pillow blocks. Our heavy duty housings are made of welded steel, then powder coated for corrosion resistance. Combine this with low cost easily replaceable “No Lube” UHMW inserts and these units are virtually maintenance free. These bearings are widely used as problem solvers in the harshest of industrial environments. Listed below are our standard sizes. Custom sizes and materials are also available.
1-3/16" 1-1/4" 1-3/4" 4-1/8" 3" 1-7/16" 1-3/8" 2" 4-7/8" 3-1/2" 1-15/16" 1-3/4" 2-1/2" 6" 4" 2-3/16" 1-7/8" 2-3/4" 6-1/2" 4-3/8" 2-7/16" 2-1/8" 3" 7" 5" 2-15/16" 2-1/2" 3-1/2" 8-1/2" 5-3/4"
1-15/16" 1-3/4" 3-1/2" 6-1/2" 4-1/4" 2-3/16" 1-7/8" 3-1/2" 6-3/4" 4-5/8" 2-7/16" 2-1/8" 4" 8" 5" 2-15/16" 2-1/2" 4-1/2" 8-3/4" 5-3/4" 3-7/16" 3-1/4" 5" 10-1/2" 7-1/4" 3-15/16" 3-1/2" 5-1/2" 12" 7-3/4" 4-7/16" 4-1/8" 6-1/4" 13-1/2" 9" 4-15/16" 4-1/2" 7" 14-3/4" 9-3/4"
Part # BoreShaft
Center
LengthThrough
BoreBolt
CenterProduct OAHBS2B1316BS2B1716BS2B11516BS2B2316BS2B2716BS2B21516
BS4B11516BS4B2316BS4B2716BS4B21516BS4B3716BS4B31516BS4B4716BS4B41516
STYLE AND MATERIAL CHART:U UHMW N NylonUR UrethaneI Insert Only
2 BOLT
4 BOLT
13
splIt tIpple BearIng
Molded UHMW Split Tipple Bearings are simply a cost effective, maintenance free, and low friction bearing with split design for easy installation. Listed below are common molded sizes we manufacture. If the following sizes below will not meet your needs, ask us about extensive stock and our custom sizes.
Style (A) Style (B)
TB 115 A, B 4" 5" 1 1/2" 1 15/16" 4" 1/2"TB 207 A, B 4" 5" 1 1/2" 2 3/8" 4" 1/2"TB 207X1 A 3 1/4" 4 3/4" 1 1/2" 2 3/8" 3 3/8" 1/2"
Extension: Parts are ordered in halves. U or L are added to the part# to designate whether Upper halves or Lower halves are ordered.
H LTBStyle W Bore Blt C-C Blt SizePart #
U
U
U
L
14 DiversifieD Plastics, inc.
BushIngs (cylindrical sleeves)
Part No. Nominal Size (in.) Housing Bore Shaft Size ID OD LTB Max Min Max Min DPSB020402 1/8 1/4 1/8 .2515 .2510 .1250 .1241 DPSB020404 1/4 DPSB020406 3/8 DPSB030503 3/16 5/16 3/16 .3140 .3135 .1875 .1866 DPSB030504 1/4 DPSB030506 3/8 DPSB030508 1/2 DPSB040602 1/4 3/8 1/8 .3765 .3760 .2500 .2491 DPSB040603 3/16 DPSB040604 1/4 DPSB040605 5/16 DPSB040606 3/8 DPSB040608 1/2 DPSB040610 5/8 DPSB040612 3/4 DPSB050704 5/16 7/16 1/4 .4390 .4385 .3125 .3116 DPSB050705 5/16 DPSB050706 3/8 DPSB050708 1/2 DPSB050710 5/8 DPSB050712 3/4 DPSB060804 3/8 1/2 1/4 .5015 .5010 .3750 .3741 DPSB060806 3/8 DPSB060808 1/2 DPSB060810 5/8 DPSB060812 3/4 DPSB060816 1 DPSB070906 7/16 9/16 3/8 .5635 .5625 .4375 .4365 DPSB070908 1/2 DPSB081004 1/2 5/8 1/4 .6260 .6250 .5000 .4990 DPSB081005 5/16 DPSB081006 3/8 DPSB081008 1/2 DPSB081010 5/8 DPSB081012 3/4 DPSB081016 1 DPSB101308 5/8 13/16 1/2 .8135 .8125 .6250 .6240 DPSB101310 5/8 DPSB101312 3/4 DPSB101316 1 DPSB121608 3/4 1 1/2 1.0010 1.0000 .7500 .7490 DPSB121610 5/8 DPSB121612 3/4 DPSB121616 1 DPSB121624 1-1/2 DPSB141812 7/8 1-1/8 3/4 1.1260 1.1250 .8750 .8740 DPSB141816 1 DPSB162008 1 1-1/4 1/2 1.2510 1.2500 1.0000 .9990 DPSB162010 5/8 DPSB162012 3/4 DPSB162016 1 DPSB162024 1-1/2 DPSB202412 1-1/4 1-1/2 3/4 1.5005 1.4995 1.2500 1.2490 DPSB202416 1 DPSB202424 1-1/2 DPSB242812 1-1/2 1-3/4 3/4 1.7505 1.7495 1.5000 1.4990 DPSB242816 1 DPSB242824 1-1/2 DPSB283212 1-3/4 2 3/4 2.0005 1.9995 1.7500 1.7490 DPSB283216 1 DPSB283224 1-1/2 DPSB323624 2 2-1/4 1-1/2 2.2505 2.2495 2.0000 1.9990 DPSB323632 2
Sleeve Bushings are available from 1/4" OD to 36" OD in a variety of engineered plastic materials. Our technical support staff will be glad to assist in assuring that the proper material is applied to your application. If you supply the information below they can also help suggest things such as running clearance, press fit, etc. We would like to help with your bushing needs, standard or custom.
Materials AvailableNatural UHMW P.E.*Natural Nylon*Molly Filled NylonOil Filled Nylon*PolyurethaneLaminate*FDA/USDA ApprovedEach material offers it's own unique characteristics includ-ing, Temperature/Load Speed/Coefficient of friction.
15
BushIngs (flanged)
Part No. Nominal Size (in.) Flange Housing Bore Shaft Size ID OD LTB OD/Thick. Max Min Max Min DPFB020402 1/8 1/4 1/8 .360/.047 .2515 .2510 .1250 .1241 DPFB020404 1/4 DPFB020406 3/8 DPFB030503 3/16 5/16 3/16 .370/.047 .3140 .3135 .1875 .1866 DPFB030504 1/4 DPFB030506 3/8 DPFB030508 1/2 DPFB040602 1/4 3/8 1/8 .560/.047 .3765 .3760 .2500 .2491 DPFB040603 3/16 DPFB040604 1/4 DPFB040605 5/16 DPFB040606 3/8 DPFB040608 1/2 DPFB040610 5/8 DPFB040612 3/4 DPFB050703 5/16 7/16 3/16 .560/.062 .4390 .4385 .3125 .3116 DPFB050704 1/4 DPFB050705 5/16 DPFB050706 3/8 DPFB050708 1/2 DPFB050710 5/8 DPFB050712 3/4 DPFB060802 3/8 1/2 1/8 .625/.062 .5015 .5010 .3750 .3741 DPFB060803 3/16 DPFB060804 1/4 DPFB060806 3/8 DPFB060808 1/2 DPFB060810 5/8 DPFB060812 3/4 DPFB060816 1 DPFB070903 7/16 9/16 3/16 .687/.062 .5635 .5625 .4375 .4365 DPFB070908 1/2 DPFB081004 1/2 5/8 1/4 .875/.062 .6260 .6250 .5000 .4990 DPFB081005 5/16 DPFB081006 3/8 DPFB081008 1/2 DPFB081010 5/8 DPFB081012 3/4 DPFB081016 1 DPFB101308 5/8 13/16 1/2 1.063/.156 .8135 .8125 .6250 .6240 DPFB101310 5/8 DPFB101312 3/4 DPFB101316 1 DPFB121610 3/4 1 5/8 1.250/.156 1.0010 1.0000 .7500 .7490 DPFB121612 3/4 DPFB121616 1 DPFB121624 1-1/2 DPFB141812 7/8 1-1/8 3/4 1.375/.156 1.1260 1.1250 .8750 .8740 DPFB141816 1 DPFB141824 1-1/2 DPFB162008 1 1-1/4 1/2 1.500/.188 1.2510 1.2500 1.0000 .9990 DPFB162010 5/8 DPFB162012 3/4 DPFB162016 1 DPFB162024 1-1/2 DPFB202412 1-1/4 1-1/2 3/4 1.750/.200 1.5005 1.4994 1.2500 1.2490 DPFB202416 1 DPFB202424 1-1/2 DPFB242812 1-1/2 1-3/4 3/4 2.000/.125 1.7505 1.7495 1.5000 1.4990 DPFB242816 1 DPFB242824 1-1/2 DPFB283212 1-3/4 2 3/4 2.250/.125 2.0005 1.9995 1.7500 1.7490 DPFB283216 1 DPFB283224 1-1/2 DPFB323624 2 2-1/4 1-1/2 2.500/.125 2.2505 2.2495 2.0000 1.9990
Flanged Bushings are available from 1/4" OD to 36" OD in a variety of engineered plastic materials. Our technical support staff will be glad to assist in assuring that the proper material is applied to your application. If you supply the information below they can also help suggest things such as running clearance, press fit, etc. We would like to help with your bushing needs, standard or custom.
Materials AvailableNatural UHMW P.E.*Natural Nylon*Molly Filled NylonOil Filled Nylon*PolyurethaneLaminate*FDA/USDA ApprovedEach material offers it's own unique characteristics includ-ing, Temperature/Load Speed/Coefficient of friction.
16 DiversifieD Plastics, inc.
kIln cart BushIngs
Our bushings are in kiln applications throughout the sawmill industry. We injection mold and machine from HT Nylon, a high-temperature, high-load resin that is self-lubricating – for long bushing life in a 250° F. operating environment where normal lubricants would melt or oxidize. All bushings are bored with thermal expansion tolerance. All other sizesare available.
This high-quality kiln cart uses DPI bushings installed as original equipment by the manufacturer. We supply long-lasting parts to many equipment factories on a regular and reliable basis
2-1/4" 1-1/8" 3" 2-1/4" 1-7/16" 3" 2-1/4" 1-1/2" 3" 2-1/4" 1-1/8" 3-1/4" 2-1/4" 1-7/16" 3-1/4" 2-1/4" 1-1/2" 3-1/4" 2-3/8" 1-1/8" 3" 2-3/8" 1-7/16" 3" 2-3/8" 1-1/2" 3" 2-3/8" 1-1/8" 3-1/4" 2-3/8" 1-7/16" 3-1/4" 2-3/8" 1-1/2" 3-1/4"
OutsideDia.
InsideDia.
LengthOverallPart #
KS1KS2KS3KL1KL2KL3KMS1KMS2KMS3KML1KML2KML3
17
dryer hanger BearIng
FEATURES: APPLICATIONS: • Sleeve or Self Aligning • COE Dryer/Infeed/Outfeed • No Lubrication • Moore Dryer/Infeed/Outfeed • Replaceable Inserts • Veneer • Up to 250° Operating Temperature • Gypsum • No Corrosion • With or Without Locking Shaft Protection Assembly
SIZES: PART #: MATERIALS: • 1 1/4" Bore or 1 1/2” • IDBS • Glass Filled Nylon Housing • IDBS (no sleeve) • UHMW and HT Nylon Bushings
(with protective sleeve)(without protective sleeve)
2.000
2.000
1.000
3/8”
3.220
18 DiversifieD Plastics, inc.
hanger BearIngs
Hanger Bearings made from engineered plastics offer a number of problem solving advantages over their metal counterparts. Features such as self lubrication, enhanced abrasion resistance, and shock absorption are among the many advantages. Listed below are some of the many sizes and materials we offer. Feel free to call us with any custom requirements you may have.
• Materials for Industrial or USDA/FDA• Temperature Range from -200°F to +500°F
1 1-1/2 1-1/16 1-7/161-1/2 2-1/8 1-9/16 1-15/16
2 2-3/4 1-9/16 1-15/16 2-7/16 3-1/4 2-3/8 2-15/16 3 4 2-3/8 2-15/16 3-7/16 4-3/4 3-1/8 3-15/16
Shaft BD BL OL Size (ID)
Hanger Bearings for Screw Conveyors - Type 226
1-1/2 2-1/4 1-3/8 1-15/16 2 3-1/4 1-5/8 1-15/16 2-7/16 4 1-5/8 2-15/16 3 4-1/2 2-1/8 2-15/16 3-7/16 4-7/8 2-11/16 3-15/16
Shaft BD BL OL Size (ID)
Hanger Bearings for Screw Conveyors - Type 230
Materials AvailableNatural UHMW P.E.*Natural Nylon*Molly Filled NylonOil Filled Nylon*PolyurethaneLaminate*FDA/USDA ApprovedEach material offers it's own unique characteristics includ-ing, Temperature/Load Speed/Coefficient of friction.
Type 226, fits hanger styles, 226, 220, 326, 20B, 26B.
Type 230, fits hanger styles 230, 216, 316, 16B, 216F.
19
roll end BearIngs
UHMW Roll End Bearing are used widely in a variety of industries and applications. Self lubricating, impact resistant and chemical resistant are just some of the features of the bearing. Used with pvc, steel or stainless steel tubing, these bearings provide simple, quiet, reliable conveying and eliminating costly down time. If the following sizes below will not meet your needs, be sure and ask us about our extensive stock and custom sizes.
EP2101 1-1/2 16 .065 1.370 1-7/8 1/16 3/16 1-5/8 1-1/2EP2102 1-1/2 14 .083 1.334 1-7/8 1/16 3/16 1-5/8 1-1/2EP2105 1-3/4 16 .065 1.620 1-7/8 1/16 3/16 1-5/8 1-1/2*EP2110 1.900 1-1/2 pipe .145 1.610 1-7/8 1/16 3/16 1-5/8 1-1/2 SCH.40EP2115 1.900 1-1/2 pipe .200 1.500 1-7/8 1/16 3/16 1-5/8 1-1/2 1.900 SCH.80EP2120 2 18 .049 1.902 1-7/8 1/16 5/16 1-1/2 1-1/2EP2121 2 16 .065 1.870 1-7/8 1/16 5/16 1-1/2 1-1/2EP2122 2 14 .083 1.834 1-7/8 1/16 5/16 1-1/2 1-1/2EP2205 2-3/8 16 .065 2.245 1-7/8 1/16 5/16 1-1/2 1-1/2EP2210 2-3/8 2 pipe .154 2.067 1-7/8 1/16 5/16 1-1/2 1-1/2 SCH.40EP2125 2-3/8 2 pipe .218 1.939 1-7/8 1/16 5/16 1-1/2 1-1/2 SCH.80EP2211 2-1/2 18 .049 2.402 1-7/8 1/16 5/16 1-1/2 1-1/2EP2212 2-1/2 16 .065 2.370 1-7/8 1/16 5/16 1-1/2 1-1/2EP2213 2-1/2 14 .083 2.334 1-7/8 1/16 5/16 1-1/2 1-1/2EP2214 2-1/2 11 .120 2.260 1-7/8 1/16 5/16 1-1/2 1-1/2EP2215 2-3/4 16 .065 2.620 1-7/8 1/16 5/16 1-1/2 1-1/2
* Available in molded part.
Part No.
ATubing
OD
TubingGauge
(in.)
Tubing Wall
BTubing
ID
CLength
E F G HHole
Depth
20 DiversifieD Plastics, inc.
roll end BearIngs
EP0101 1-3/8 18 .049 1.277 1-1/4 1/16 3/16 1EP0102 1-3/8 16 .065 1.245 1-1/4 1/16 3/16 1EP0105 1-1/2 18 .049 1.402 1-1/2 1/16 3/16 1-1/4EP0106 1-1/2 16 .065 1.370 1-1/2 1/16 3/16 1-1/4EP0107 1-1/2 14 .083 1.334 1-1/2 1/16 3/16 1-1/4EP0110 1.510 1-1/4EMT .065 1.380 1-1/2 1/16 3/16 1-1/4EP0115 1-5/8 16 .065 1.495 1-1/2 1/16 3/16 1-1/4EP0116 1/5/8 11 .120 1.385 1-1/2 1/16 3/16 1-1/4EP0120 1.660 1-1/4 PIPE .140 1.380 1-1/2 1/16 3/16 1-1/4 SCH.40EP0125 1.740 1-1/2 EMT .065 1.610 1-1/2 1/16 3/16 1-1/4EP0130 1-3/4 16 .065 1.620 1-1/2 1/16 3/16 1-1/4EP0132 1-3/4 13 .095 1.560 1-1/2 1/16 3/16 1-1/4EP0133 1-3/4 11 .120 1.510 1-1/2 1/16 3/16 1-1/4EP0135 1-7/8 16 .065 1.745 1-1/2 1/16 3/16 1-1/4EP0136 1-7/8 13 .095 1.685 1-1/2 1/16 3/16 1-1/4*EP0140 1.900 1-1/2 PIPE .145 1.610 1-1/2 1/16 3/16 1-1/4 SCH. 40EP0145 1.900 1-1/2PIPE .200 1.500 1-1/2 1/16 3/16 1-1/4 SCH. 80EP0150 1.900 16 .065 1.770 1-1/2 1/16 3/16 1-1/4EP0155 2 18 .049 12.902 1-5/8 1/16 5/16 1-1/4EP0156 2 16 .065 1.870 1-5/8 1/16 5/16 1-1/4EP0157 2 14 .083 1.834 1-5/8 1/16 5/16 1-1/4EP0158 2 13 .095 1.810 1-5/8 1/16 5/16 1-1/4*EP0159 2 11 .120 1.760 1-5/8 1/16 5/16 1-1/4EP0201 2.197 2EMT .065 2.065 1-5/8 1/16 5/16 1-1/4EP0202 2-1/4 18 .049 2.152 1-5/8 1/16 5/16 1-1/4EP0203 2-1/4 16 .065 2.120 1-5/8 1/16 5/16 1-1/4EP0204 2-1/4 14 .083 2.084 1-5/8 1/16 5/16 1-1/4EP0205 2-1/4 13 .095 2.060 1-5/8 1/16 5/16 1-1/4EP0206 2-1/4 11 .120 2.010 1-5/8 1/16 5/16 1-1/4EP0160 2-1/4 10 .134 1.982 1-5/8 1/16 5/16 1-1/4EP0210 2-3/8 16 .065 2.245 1-5/8 1/16 5/16 1-1/4EP0212 2-3/8 11 .120 2.135 1-5/8 1/16 5/16 1-1/4*EP0215 2.375 2 PIPE .154 2.067 1-5/8 1/16 5/16 1-1/4 SCH.40*EP0165 2.375 2 PIPE .218 1.955 1-5/8 0 1/4 1-3/8 SCH.80EP0225 2-1/2 16 .065 2.370 1-5/8 1/16 5/16 1-1/4EP0226 2-1/2 14 .083 2.334 1-5/8 1/16 5/16 1-1/4EP0227 2-1/2 13 .095 2.310 1-5/8 1/16 5/16 1-1/4EP0228 2-1/2 11 .120 2.260 1-5/8 1/16 5/16 1-1/4EP0230 2-3/4 16 .065 2.620 1/5/8 1/16 5/16 1-1/4EP0232 2-3/4 11 .120 2.510 1/5/8 1/16 5/16 1-1/4EP0235 2.875 2-1/2 PIPE .203 2.469 1-5/8 1/16 5/16 1-1/4 SCH. 40EP0236 2.875 2-1/2 PIPE .276 2.323 1-5/8 1/16 5/16 1-1/4 SCH. 80*EP0240 3 16 .065 2.870 1-3/4 1/16 5/16 1-3/8EP0242 3 13 .095 2.810 1-3/4 1/16 5/16 1-3/8EP0243 3 11 .120 2.760 1-3/4 1/16 5/16 1-3/8EP0301 3-1/4 16 .065 3.120 1-3/4 1/16 5/16 1-3/8EP0302 3-1/4 13 .095 3.060 1-3/4 1-16 5/16 1-3/8EP0304 3-1/2 13 .095 3.310 1-3/4 1/16 5/16 1-3/8EP0305 3-1/2 11 .120 3.260 1-3/4 1/16 5/16 1-3/8EP0306 3.500 3 PIPE .216 3.068 1-3/4 1/16 5/16 1-3/8 SCH. 40EP0245 3.500 3 PIPE .300 2.900 1-3/4 1/16 5/16 1-3/8 SCH. 80EP0310 3-3/4 16 .065 3.620 1-3/4 1/16 5/16 1-3/8EP0315 4 16 .065 3.870 1-3/4 1/16 5/16 1-3/8EP0316 4 14 .083 3.834 1-3/4 1/16 5/16 1-3/8EP0320 4 3-1/2 PIPE .226 3.548 1-3/4 1/16 5/16 1-3/8 SCH. 40
* Available in molded part.
Part No. A Tubing Tubing B C E F G Tubing Gauge Wall Tubing OD (in.) ID
21
roll end BearIngs
EP1001 1/2 20 .035 .430 1/2 - 3/16 5/16EP1002 1/2 18 .049 .402 1/2 - 3/16 5/16EP1005 5/8 20 .035 .555 1/2 - 3/16 5/16EP1010 .706 1/2 EMT .042 .622 11/16 1/16 1/8 1/2EP1015 3/4 20 .035 .680 11/16 1/16 1/8 1/2EP1016 3/4 18 .049 .652 11/16 1/16 1/8 1/2EP1017 3/4 16 .065 .620 11/16 1/16 1/8 1/2EP1020 7/8 20 .035 .805 11/16 1/16 1/8 1/2EP1022 7/8 16 .065 .745 11/16 1/16 1/8 1/2EP1025 .922 3/4 EMT .049 .824 11/16 1/16 1/8 1/2EP1030 1.000 20 .035 .930 11/16 1/16 1/8 1/2EP1031 1.000 18 .049 .902 11/16 1/16 1/8 1/2EP1032 1.000 17 .058 .884 11/16 1/16 1/8 1/2EP1033 1.000 16 .065 .870 11/16 1/16 1/8 1/2EP1035 1.050 3/4 PIPE .113 .824 11/16 1/16 1/8 1/2 SCH. 40EP1101 1-1/8 17 .058 1.009 11/16 1/16 1/8 1/2EP1041 1-1/8 16 .065 .995 11/16 1/16 1/8 1/2EP1102 1.163 1 EMT .057 1.049 11/16 1/16 1/8 1/2EP1105 1-1/4 20 .035 1.180 3/4 1/16 1/8 9/16EP1106 1-1/4 18 .049 1.152 3/4 1/16 1/8 9/16EP1110 1.315 1 PIPE .133 1.049 3/4 1/16 1/8 9/16 SCH. 40 3/4EP1115 1-3/8 18 .049 1.277 3/4 1/16 1/8 9/16EP1116 1-3/8 16 .065 1.245 3/4 1/16 1/8 9/16EP1120 1-1/2 20 .035 1.430 1 1/16 3/16 3/4EP1122 1-1/2 16 .065 1.370 1 1/16 3/16 3/4EP1125 1.510 1-1/4 EMT .065 1.380 1 1/16 3/16 3/4EP1130 1-5/8 20 .035 1.555 1 1/16 3/16 3/4EP1131 1-5/8 18 .049 1.527 1 1/16 3/16 3/4EP1132 1-5/8 16 .065 1.495 1 1/16 3/16 3/4EP1135 1.740 1-1/2 EMT .065 1.610 1 1/16 3/16 3/4EP1140 1-3/4 20 .035 1.680 1 1/16 3/16 3/4EP1142 1-3/4 16 .065 1.620 1 1/16 3/16 3/4EP1145 1-7/8 20 .035 1.805 1 1/16 3/16 3/4EP1146 1-7/8 18 .049 1.777 1 1/16 3/16 3/4EP1147 1-7/8 16 .065 1.745 1 1/16 3/16 3/4EP1150 1.900 1-1/2 PIPE .145 1.610 1 1/16 3/16 3/4 SCH. 40EP1155 1.900 1-1/2 PIPE .200 1.500 1 1/16 3/16 3/4 SCH. 80EP1160 1.900 16 .065 1.770 1 1/16 3/16 3/4EP1165 2.000 20 .035 1.930 1 1/16 3/16 3/4EP1166 2.000 18 .049 1.902 1 1/16 3/16 3/4EP1167 2.000 16 .065 1.870 1 1/16 3/16 3/4*EP1201 2.197 2 EMT .065 2.067 1 1/16 3/16 3/4EP1205 2-1/4 20 .035 2.180 1 1/16 3/16 3/4EP1206 2-1/4 18 .049 2.152 1 1/16 3/16 3/4*EP1207 2-1/4 16 .065 2.120 1 1/16 3/16 3/4EP1210 2-1/2 20 .035 2.430 1 1/16 3/16 3/4EP1211 2-1/2 18 .049 2.402 1 1/16 3/16 3/4EP1212 2-1/2 16 .065 2.370 1 1/16 3/16 3/4
* Available in molded part.
Part No. A Tubing Tubing B C E F G Tubing Gauge Wall Tubing OD (in.) ID
22 DiversifieD Plastics, inc.
staInless steel hex shaft adapter
DPHA516 5/8 1-1/8 13/16 1/16DPHA716 5/8 1-1/8 13/16 1/16DPHA716 1-3/4 1/8DPHA1116 15/16 1-7/8 1-1/8 1/16
Part # B C D E
23
sprockets
drIve components
24 DiversifieD Plastics, inc.
plastIc roller chaIn
Plastic chains were developed primarily for low-power transmission applications. The chains can be used with steel sprockets or plastic sprockets, and are suitable for relatively wide speed ranges.
These drive components can be especially useful in harsh chemical, moisture and temperature environments. The chains can incorporate additives for self-lubrication, also usable where cleanliness is important, as in food-processing machinery, computer equipment.
Chains are made with links that snap together so that each link in effect becomes a master link. Various attachments can be used with plastic chains and sprockets. These attachments can be fastened to the chain or sprocket, or molded integrally.
Plastic chains are available as off the shelf items in 1/4-in., 3/8-in. and 1/2-in. pitches. Non-standard sizes and shapes including chain with various types of attachments have been developed for special applications.
Plastic chains and sprockets are generally about one-fifth to one-tenth as heavy as equivalent metal components. They are relatively quiet and are non-conductive and nonmagnetic.
GENERAL CHARACTERISTICSHorsepower ratings have not been determined for all sizes of plastic chains. However, the chain performance data chart shows the results for breaking strength of the representative chain sizes. Working strength is often figured as 1/3 of the average breaking strength.
Elongations vs. time tests have shown that the major portion of elongation or stretch occurs almost immediately after the load is applied; 90 percent of elongation takes place within the first 15 minutes of operation. Based on total length, subsequent elongation is less than 0.3 percent. When the load is removed, the chain recovers as a function of time and material. In general, maximum recovery is achieved within 30 minutes of load removal.
PRODUCT DESIGNPlastic chain is produced in three standard pitch sizes, 1/4, 3/8 and 1/2 inch. Key roller and linkage dimensions can be seen below. Specialty pitch designs available.
Cat. DimensionsNo. Pitch W D C F L H#25 1/4 1/8 .130 .105 .040 .359 .25#35 3/8 3/16 .200 .141 .075 .545 .35#40 1/2 5/16 .312 .156 .088 .725 .46
25
plastIc roller chaInMATERIAL DATA
In order to meet the range of strength, chemical and heat resistance requirements of the marketplace, Diversified Plastic offers chains and sprockets molded from four standard materials: Polypropylene, Delrin (Acetal), Kynar PVDF and Nylatron GS molybdenum disulfide filled nylon. Performance data on the base polymer products described below should be used in the selection of the specific material for the application involved.
Note: Date generated by an independent testing lab. Values should only be used as a guideline. Application testing is strongly recommended
Note: D-Delrin: PP - Polypropylene; N- Nylatron; K-Kynar
NOTE: All values are typical for material and should only be used as a guide in selecting appropriate material. Application testing is strongly recommended.
CHAIN PERFORMANCE DATA #25 Chain #35 Chain #40 Chain 25D 25PP 25N 25K 35D 35PP 35N 35K 40D 40PP 40N 40KTensile Strength @ Break 63 29 65 56 136 66 136 109 175 89 173 141Elongation % Ultimate 9 11 34 13 6 10 11 8 4 8 9 7@ 75% Tensile Strength 5 6 14 7 5 5 9 5 3 4 7 4Elongation Recovery % @ Removal of Load 88 72 69 76 88 80 73 84 86 77 73 84After 10 Minutes 93 91 84 90 95 92 87 94 91 87 87 93After 30 Minutes 98 95 87 92 95 94 91 94 95 92 88 95
Nylatron GS Acetal Polypropylene Kynar PVDF Strength:Tensile (PSI) 13,700 9,700 4,500 4,500Compressive (PSI) 12,500 15,600 5,500 8,000Flexural (PSI) 17,000 13,600 6,000 8,600 Elongation % 15 13 100 8Water Absorption %24 hrs. 1/8” thick 0.8 0.25 0.01 0.05Heat Deflection Temp. 183 255 120 183@264 PSI, of Resistance: Effect OfWeak Acids resistant resistant none very resistantStrong Acids attacked some attacked slowly very resistant by oxidizing acidsWeak Alkalies none resistant none very resistantStrong Alkalies resistant resistant very resistant attackedOrganic Solvent resistant to resistant to most resistant below resistant to common solvents 80°C most
26 DiversifieD Plastics, inc.
roller chaIn sprockets
Styles AvailableA – A PlateB – B Style, hub on one sideC – C Style, hub on both sidesD – Drive SprocketS – SplitX – Special
Plastic Roller Chain Sprockets are chemical resistant, do not require lubrication and reduce shock to provide smoother quieter operation.
Part No. Pitch Bore (in.) LTB No. Teeth Dia. Stock DPRC3508 8 .980 1/4 .668 DPRC3509 9 1.096 3/8 3/4 DPRC3510 10 1.214 3/8 3/4 DPRC3511 11 1.331 3/8 3/4 DPRC3512 12 1.449 1/2 3/4 DPRC3513 13 1.567 1/4 .668 DPRC3514 14 1.685 1/2 3/4 DPRC3515 15 1.804 1/2 3/4 DPRC3516 16 1.922 1/2 3/4 DPRC3517 17 2.041 1/2 3/4 DPRC3518 18 2.160 1/2 3/4 DPRC3519 19 2.278 1/2 3/4 DPRC3520 20 2.397 1/2 7/8 DPRC3521 21 2.516 1/2 3/4 DPRC3522 22 2.635 1/2 3/4 DPRC3523 23 2.754 1/2 3/4 DPRC3524 24 2.873 1/2 7/8 DPRC3525 25 2.992 1/2 3/4 DPRC3526 26 3.111 1/2 7/8 DPRC3527 27 3.230 1/2 3/4 DPRC3528 28 3.349 1/2 3/4 DPRC3529 29 3.468 1/2 3/4 DPRC3530 30 3.588 1/2 7/8 DPRC3531 31 3.707 1/2 3/4 DPRC3532 32 3.826 1/2 7/8 DPRC3533 33 3.945 1/2 7/8 DPRC3534 34 4.064 1/2 7/8 DPRC3535 35 4.183 1/2 7/8 DPRC3536 36 4.303 5/8 7/8 DPRC3537 37 4.422 1/2 7/8 DPRC3538 38 4.541 1/2 7/8 DPRC3539 39 4.660 1/2 7/8 DPRC3540 40 4.780 5/8 7/8 DPRC3541 41 4.899 1/2 7/8 DPRC3542 42 5.018 1/2 7/8 DPRC3543 43 5.137 1/2 7/8 DPRC3544 44 5.257 1/2 7/8 DPRC3545 45 5.376 5/8 1 DPRC3546 46 5.495 1/2 7/8 DPRC3547 47 5.614 1/2 7/8 DPRC3548 48 5.734 1/2 7/8
No. 35 3/8” Pitch
Styles AvailableA – A PlateB – B Style, hub on one sideC – C Style, hub on both sidesD – Drive SprocketS – SplitX – Special
27
roller chaIn sprocketsPlastic Roller Chain Sprockets are chemical resistant, do not require lubrication, and reduce shock to provide smoother quieter operation.
Materials AvailableNatural UHMW P.E.*Natural Nylon*Molly Filled NylonOil Filled Nylon*PolyurethaneLaminate*FDA/USDA ApprovedEach material offers it's own unique characteristics includ-ing, Temperature/Load Speed/Coefficient of friction.
Styles AvailableA – A PlateB – B Style, hub on one sideC – C Style, hub on both sidesD – Drive SprocketS – SplitX – Special
No. 40 1/2” Pitch
Part No. Pitch Bore (in.) LTB No. Teeth Dia. Stock DPRC4008 8 1.307 1/2 7/8 DPRC4009 9 1.462 1/2 7/8 DPRC4010 10 1.618 1/2 7/8 DPRC4011 11 1.775 1/2 7/8 DPRC4012 12 1.932 1/2 7/8 DPRC4013 13 2.089 1/2 7/8 DPRC4014 14 2.247 1/2 7/8 DPRC4015 15 2.405 1/2 7/8 DPRC4016 16 2.563 1/2 7/8 DPRC4017 17 2.721 1/2 1 DPRC4018 18 2.879 1/2 1 DPRC4019 19 3.038 1/2 1 DPRC4020 20 3.196 1/2 1 DPRC4021 21 3.355 1/2 1 DPRC4022 22 3.513 1/2 1 DPRC4023 23 3.672 1/2 1 DPRC4024 24 3.831 1/2 1 DPRC4025 25 3.989 1/2 1 DPRC4026 26 4.148 1/2 1 DPRC4027 27 4.307 1/2 1 DPRC4028 28 4.466 1/2 1 DPRC4029 29 4.625 1/2 1 DPRC4030 30 4.783 1/2 1 DPRC4031 31 4.942 1/2 1 DPRC4032 32 5.101 1/2 1 DPRC4033 33 5.26 1/2 1 DPRC4034 34 5.419 1/2 1 DPRC4035 35 5.578 1/2 1 DPRC4036 36 5.737 1/2 1 DPRC4037 37 5.896 1/2 1 DPRC4038 38 6.055 1/2 1 DPRC4039 39 6.214 1 1 DPRC4040 40 6.373 1 1-1/8 DPRC4041 41 6.532 1 1-1/8 DPRC4042 42 6.691 1 1-1/8 DPRC4043 43 6.85 1 1-1/8 DPRC4044 44 7.009 1 1-1/8 DPRC4045 45 7.168 1 1-1/8 DPRC4046 46 7.327 1 1-1/8 DPRC4047 47 7.486 1 1-1/8 DPRC4048 48 7.645 1 1-1/8
No. 50 5/8” Pitch
Part No. Pitch Bore (in.) LTB No. Teeth Dia. Stock DPRC5009 9 1.827 1/2 1 DPRC5010 10 2.023 1/2 1 DPRC5011 11 2.218 1/2 1 DPRC5012 12 2.415 1/2 1 DPRC5013 13 2.612 1/2 1 DPRC5014 14 2.803 1/2 1 DPRC5015 15 3.006 1/2 1 DPRC5016 16 3.204 1/2 1 DPRC5017 17 3.401 1/2 1 DPRC5018 18 3.599 1/2 1 DPRC5019 19 3.797 1/2 1 DPRC5020 20 3.995 1/2 1 DPRC5021 21 4.193 1/2 1 DPRC5022 22 4.392 1/2 1 DPRC5023 23 4.59 1/2 1 DPRC5024 24 4.788 1/2 1-1/4 DPRC5025 25 4.987 1/2 1-1/4 DPRC5026 26 5.185 1/2 1-1/4 DPRC5027 27 5.384 1/2 1-1/4 DPRC5028 28 5.582 1/2 1-1/4 DPRC5029 29 5.781 1/2 1-1/4 DPRC5030 30 5.979 1/2 1-1/4 DPRC5031 31 6.178 1/2 1-1/4 DPRC5032 32 6.376 1/2 1-1/4 DPRC5033 33 6.575 1/2 1-1/4 DPRC5034 34 6.774 1/2 1-1/4 DPRC5035 35 6.972 1/2 1-1/4 DPRC5036 36 7.171 1/2 1-1/4 DPRC5037 37 7.37 1/2 1-1/4 DPRC5038 38 7.568 1/2 1-1/4 DPRC5039 39 7.767 1/2 1-1/4 DPRC5040 40 7.966 3/4 1-1/4 DPRC5041 41 8.165 3/4 1-1/4 DPRC5042 42 8.363 3/4 1-1/4 DPRC5043 43 8.562 3/4 1-1/4 DPRC5044 44 8.761 3/4 1-1/4 DPRC5045 45 8.96 3/4 1-1/4 DPRC5046 46 9.159 3/4 1-1/4 DPRC5047 47 9.357 3/4 1-1/4 DPRC5048 48 9.556 3/4 1-1/4
28 DiversifieD Plastics, inc.
roller chaIn sprockets
Part No. Pitch Bore (in.) LTB No. Teeth Dia. Stock DPRC8008 8 2.613 3/4 1-1/2 DPRC8009 9 2.924 3/4 1-1/2 DPRC8010 10 3.236 3/4 1-1/2 DPRC8011 11 3.549 3/4 1-1/2 DPRC8012 12 3.864 3/4 1-1/2 DPRC8013 13 4.179 1 1-1/2 DPRC8014 14 4.494 1 1-1/2 DPRC8015 15 4.810 1 1-1/2 DPRC8016 16 5.126 1 1-1/2 DPRC8017 17 5.442 1 1-1/2 DPRC8018 18 5.759 1 1-1/2 DPRC8019 19 6.076 1 1-1/2 DPRC8020 20 6.392 1 1-1/2 DPRC8021 21 6.710 1 1-3/4 DPRC8022 22 7.027 1 1-3/4 DPRC8023 23 7.344 1 1-3/4 DPRC8024 24 7.661 1 1-3/4 DPRC8025 25 7.979 1 1-3/4 DPRC8026 26 8.296 1 2 DPRC8027 27 8.614 1 2 DPRC8028 28 8.931 1 2 DPRC8029 29 9.249 1 2 DPRC8030 30 9.567 1 2 DPRC8031 31 9.885 1 2 DPRC8032 32 10.202 1 2 DPRC8033 33 10.520 1 2 DPRC8034 34 10.838 1 2 DPRC8035 35 11.156 1 2 DPRC8036 36 11.474 1 2 DPRC8037 37 11.792 1 2 DPRC8038 38 12.11 1 2 DPRC8039 39 12.428 1 2 DPRC8040 40 12.746 1 2 DPRC8041 41 13.063 1 2 DPRC8042 42 13.382 1 2 DPRC8043 43 13.700 1 2 DPRC8044 44 14.018 1 2 DPRC8045 45 14.336 1 2 DPRC8046 46 14.654 1 2 DPRC8047 47 14.972 1 2 DPRC8048 48 15.290 1 2 DPRC8049 49 15.608 1 2 DPRC8050 50 15.926 1 2
No. 80 1” Pitch
Materials AvailableNatural UHMW P.E.*Natural Nylon*Molly Filled NylonOil Filled Nylon*PolyurethaneLaminate*FDA/USDA ApprovedEach material offers it's own unique characteristics includ-ing, Temperature/Load Speed/Coefficient of friction.
Styles AvailableA – A PlateB – B Style, hub on one sideC – C Style, hub on both sidesD – Drive SprocketS – SplitX – Special
No. 60 3/4” Pitch
Part No. Pitch Bore (in.) LTB No. Teeth Dia. Stock DPRC6008 8 1.960 1/2 1-1/4 DPRC6009 9 2.193 1/2 1-1/4 DPRC6010 10 2.427 1/2 1-1/4 DPRC6011 11 2.662 3/4 1-1/4 DPRC6012 12 2.898 3/4 1-1/4 DPRC6013 13 3.134 3/4 1-1/4 DPRC6014 14 3.370 3/4 1-1/4 DPRC6015 15 3.607 3/4 1-1/4 DPRC6016 16 3.844 3/4 1-1/4 DPRC6017 17 4.082 1 1-1/4 DPRC6018 18 4.319 1 1-1/4 DPRC6019 19 4.557 1 1-1/4 DPRC6020 20 4.794 1 1-1/4 DPRC6021 21 5.032 1 1-1/4 DPRC6022 22 5.270 1 1-1/4 DPRC6023 23 5.508 1 1-1/4 DPRC6024 24 5.746 1 1-1/4 DPRC6025 25 5.984 1 1-1/4 DPRC6026 26 6.222 1 1-1/4 DPRC6027 27 6.460 1 1-1/4 DPRC6028 28 6.699 1 1-1/4 DPRC6029 29 6.937 1 1-1/4 DPRC6030 30 7.175 1 1-1/4 DPRC6031 31 7.413 1 1-1/4 DPRC6032 32 7.652 1 1-1/4 DPRC6033 33 7.890 1 1-1/4 DPRC6034 34 8.128 1 1-1/4 DPRC6035 35 8.367 1 1-1/4 DPRC6036 36 8.605 1 1-1/4 DPRC6037 37 8.844 1 1-1/4 DPRC6038 38 9.082 1 1-1/4 DPRC6039 39 9.321 1 1-1/4 DPRC6040 40 9.559 1 1-1/4 DPRC6041 41 9.798 1 1-1/4 DPRC6042 42 10.036 1 1-1/4 DPRC6043 43 10.275 1 1-1/4 DPRC6044 44 10.513 1 1-1/4 DPRC6045 45 10.752 1 1-1/4 DPRC6046 46 10.990 1 1-1/4 DPRC6047 47 11.229 1 1-1/4 DPRC6048 48 11.467 1 1-1/4 DPRC6049 49 11.706 1 1-1/4 DPRC6050 50 11.944 1 1-1/4
29
roller chaIn sprockets
Part Bore (in.) No. Stock DPRC9908 3/4 DPRC9909 3/4 DPRC9910 1 DPRC9911 1 DPRC9912 1 DPRC9913 1 DPRC9914 1 DPRC9915 1 DPRC9916 1 DPRC9917 1 DPRC9918 1 DPRC9919 1 DPRC9920 1 DPRC9921 1 DPRC9922 1 DPRC9923 1 DPRC9924 1 DPRC9925 1 DPRC9926 1 DPRC9927 1 DPRC9928 1 DPRC9929 1 DPRC9930 1 DPRC9931 1 DPRC9932 1 DPRC9933 1 DPRC9934 1 DPRC9935 1 DPRC9936 1 DPRC9937 1 DPRC9938 1 DPRC9939 1 DPRC9940 1 DPRC9941 1 DPRC9942 1 DPRC9943 1 DPRC9944 1 DPRC9945 1 DPRC9946 1 DPRC9947 1 DPRC9948 1 DPRC9949 1 DPRC9950 1
No. 100 1-1/4” Pitch
Materials AvailableNatural UHMW P.E.*Natural Nylon*Molly Filled NylonOil Filled Nylon*PolyurethaneLaminate*FDA/USDA ApprovedEach material offers it's own unique characteristics includ-ing, Temperature/Load Speed/Coefficient of friction.
Styles AvailableA – A PlateB – B Style, hub on one sideC – C Style, hub on both sidesD – Drive SprocketM – Multiple Strands AvailableS – SplitX – Special
No. 100 1-1/4” Pitch
Part No. Pitch Bore (in.) LTB No. Teeth Dia. Stock DPRC9908 8 3.266 3/4 1-3/4 DPRC9909 9 3.655 3/4 1-3/4 DPRC9910 10 4.045 1 1-3/4 DPRC9911 11 4.437 1 1-3/4 DPRC9912 12 4.83 1 1-3/4 DPRC9913 13 5.223 1 1-3/4 DPRC9914 14 5.617 1 1-3/4 DPRC9915 15 6.012 1 1-3/4 DPRC9916 16 6.407 1 1-3/4 DPRC9917 17 6.803 1 1-3/4 DPRC9918 18 7.198 1 1-3/4 DPRC9919 19 7.594 1 2 DPRC9920 20 7.991 1 2 DPRC9921 21 8.387 1 2 DPRC9922 22 8.783 1/2 2 DPRC9923 23 9.18 1/2 2 DPRC9924 24 9.577 1/2 2 DPRC9925 25 9.973 1/2 2 DPRC9926 26 10.37 1/2 2 DPRC9927 27 10.767 1/2 2 DPRC9928 28 11.164 1/2 2 DPRC9929 29 11.561 1/2 2 DPRC9930 30 11.958 1/2 2 DPRC9931 31 12.356 1/2 2 DPRC9932 32 12.753 1/2 2 DPRC9933 33 13.15 1/2 2 DPRC9934 34 13.547 1/2 2 DPRC9935 35 13.945 1/2 2-1/2 DPRC9936 36 14.342 1 2-1/2 DPRC9937 37 14.74 1 2-1/2 DPRC9938 38 15.137 1 2-1/2 DPRC9939 39 15.534 1 2-1/2 DPRC9940 40 15.932 1 2-1/2 DPRC9941 41 16.329 1 2-1/2 DPRC9942 42 16.727 1 2-1/2 DPRC9943 43 17.124 1 2-1/2 DPRC9944 44 17.522 1 2-1/2 DPRC9945 45 17.919 1 2-1/2 DPRC9946 46 18.317 1 2-1/2 DPRC9947 47 18.715 1 2-1/2 DPRC9948 48 19.112 1 2-1/2 DPRC9949 49 19.51 1 2-1/2 DPRC9950 50 19.907 1 2-1/2
30 DiversifieD Plastics, inc.
roller chaIn sprockets
No. 120 1-1/2” Pitch
Part No. Pitch Bore (in.) LTB No. Teeth Dia. Stock DPRC1211 11 5.324 1-1/2 2-1/8 DPRC1212 12 5.796 1-1/2 2-1/8 DPRC1213 13 6.268 1-1/2 2-1/4 DPRC1214 14 6.741 1-1/2 2-1/8 DPRC1215 15 7.215 1-1/2 2-3/8 DPRC1216 16 7.689 1-1/2 2-3/8 DPRC1217 17 8.163 1-1/2 2-3/8 DPRC1218 18 8.638 1-1/2 2-3/8 DPRC1219 19 9.113 1-1/2 2-3/8 DPRC1221 21 10.064 1-1/2 2-3/8 DPRC1226 26 12.444 1-1/2 2-3/8
No. 160 2” Pitch Taper-Lock Sprockets
Part No. Pitch Bore (in.) LTB No. Teeth Dia. Stock DPRC1611 11 7.099 2-1/2 1-3/4 DPRC1612 12 7.727 3 2 DPRC1613 13 8.357 3 2 DPRC1614 14 8.988 3 2 DPRC1615 15 9.620 3-1/2 3-1/2 DPRC1616 16 10.252 3-1/2 3-1/2 DPRC1617 17 10.885 3-1/2 3-1/2 DPRC1618 18 11.518 3-1/2 3-1/2 DPRC1619 19 12.151 3-1/2 3-1/2 DPRC1621 21 13.419 3-1/2 3-1/2 DPRC1626 26 16.593 3-1/2 3-1/2 DPRC1635 35 22.313 4 4 DPRC1645 45 28.671 4 4 DPRC1660 60 38.215 4-1/2 4-1/2
Materials AvailableNatural UHMW P.E.*Natural Nylon*Molly Filled NylonOil Filled Nylon*PolyurethaneLaminate*FDA/USDA ApprovedEach material offers it's own unique characteristics includ-ing, Temperature/Load Speed/Coefficient of friction.
Styles AvailableA – A PlateB – B Style, hub on one sideC – C Style, hub on both sidesD – Drive SprocketS – SplitX – Special
31
solId torque drIves™
Solid Torque™ drives are engineered to withstand loads that are typically too much for standard plastic sprockets, gears and timing belt pulleys. Inserting a stainless steel hexagonal insert effectively increases the load rating of the unit by spreading the force of the torque over a much larger area.
Tests performed indicate that the effective load that the unit with a Solid Torque™ will endure before failure is at least 3 times greater than when using a standard plastic key design.
Minimum Hub Diameter
Bore Sizes(Incudes Keyway & Setscrew
1-9/16” 3/8, 1/2, 5/8
2” 3/8, 1/2, 5/8, 3/4, 7/8
2-3/8” 3/8, 1/2, 5/8, 3/4, 7/8, 1
3” 3/8, 1/2, 5/8, 3/4, 7/8, 1, 1-1/4
32 DiversifieD Plastics, inc.
drIve huBs - roller chaIn sprockets & gears
For use with Type A Plate sprockets, gears and pulleys.
Bore Catalog No.Round DPS DPS DPS DPS DPS DPS(inches) 10 12 15 17 22 271/2 X X X X9/16 X X X X5/8 X X X X X 11/16 X X X X X 3/4 X X X X X 13/16 X X X X X7/8 X X X X X15/16 X X X X X 1 X X X X X X1-1/16 X X X X X1-1/8 X X X X X 1-3/16 X X X X X 1-1/4 X X X X X1-5/16 X X X X1-3/8 X X X X 1-7/16 X X X X1-1/2 X X X X 1-9/16 X X X1-5/8 X X X1-11/16 X X X1-3/4 X X X1-13/16 X X1-7/8 X X1-15/16 X X2 X X2-1/16 X X2-1/8 X X 2-3/16 X X 2-1/4 X X2-5/16 X2-3/8 X 2-7/16 X2-1/2 X 2-9/16 X2-5/8 X2-11/16 X2-3/4 X
Metal Hub and Plastic Type A Plate Sprocket Assembly
DPS 10 Hub DPS 12 Hub
DPS 22 Hub DPS 27 Hub
DPS 15 Hub DPS 17 Hub
DPS 27 Hub
DPS 17 HubDPS 17 Hub
33
ag chaIn sprockets
Machined from USDA/FDA accepted UHMW, these sprockets are light weight, need no lubrication and can often be used as an “all plastic drive” in many light duty applications. However, if RPM and load become an important factor, a stainless steel hub can be mechanically fastened. All sizes, materials and tooth profiles are available as well as splits, idlers and drives.
STYLES AVAILABLEA A PlateB B Style, hub on one sideC C Style, hub on both sidesD Drive SprocketS SplitX Special
Length Pitch Product Teeth through Bore Diameter
#45 CHAIN 11 2" 5.79 1.630" Pitch 14 2" 7.33 16 2" 8.36 18 2" 9.39 20 3" 10.42 24 3" 12.49
#52 CHAIN 11 2" 5.34 1.506" Pitch 14 3" 6.77 16 3" 7.72 18 3" 8.67 20 3" 9.60 24 3" 12.00
#55 CHAIN 11 3" 5.79 1.631" Pitch 14 3" 7.33 16 3" 8.36 18 3" 9.39 20 3" 10.43 24 4" 12.50
#62 CHAIN 11 3" 5.87 1.654" Pitch 14 3" 7.43 16 3" 8.48 18 3" 9.53 20 3" 10.57 24 4" 12.15
#67 CHAIN 11 3" 8.19 2.308" Pitch 14 3" 10.37 16 3" 11.83 18 3" 13.29 20 3" 14.75 24 4" 17.60
Part #
AG4511AG4514AG4516AG4518AG4520AG4524 AG5211AG5214AG5216AG5218AG5220AG5224 AG5511AG5514AG5516AG5518AG5520AG5524 AG6211AG6214AG6216AG6218AG6220AG6224 AG6711AG6714AG6716AG6718AG6720 AG6724
34 DiversifieD Plastics, inc.
flat-top conveyor sprockets
#815 Split Sprocket
1 11/16"
OD
Bore
Machined UHMW Flat Top Conveyor Sprockets are USDA/FDA accepted and are direct replacements for cast, steel, or other plastic sprockets in idler and light drive applications. These sprockets are lightweight, need no lubrication, chemical resistant and are designed for use with steel or plastic flat top chain. All sizes and tooth profiles are available as well as splits, idlers and drives.
Product Part # Teeth Face OD#815 Sprocket* FTS 815 19 19 1 11/16" 4.610 FTS 815 20 20 1 11/16" 4.860 FTS 815 21 21 1 11/16" 5.120 FTS 815 22 22 1 11/16" 5.350 FTS 815 23 23 1 11/16" 5.590 FTS 815 24 24 1 11/16" 5.830 FTS 815 25 25 1 11/16" 6.070 FTS 815 27 27 1 11/16" 6.560 FTS 815 29 29 1 11/16" 7.050 FTS 815 31 31 1 11/16" 7.530 FTS 815 41 41 1 11/16" 9.930
Product Part # Teeth Face OD#820 Sprocket* FTS 820 13 13 1 11/16" 4.610 FTS 820 15 15 1 11/16" 4.860 FTS 820 19 19 1 11/16" 5.120 FTS 820 21 21 1 11/16" 5.350 FTS 820 22 22 1 11/16" 5.590 FTS 820 23 23 1 11/16" 5.830 FTS 820 24 24 1 11/16" 6.070 FTS 820 25 25 1 11/16" 6.560 FTS 820 27 27 1 11/16" 7.050 FTS 820 31 31 1 11/16" 7.530 FTS 820 41 41 1 11/16" 9.930
Product Part # Teeth Face OD#821 Sprocket* FTS 821 21 21 3" 5.120 FTS 821 23 23 3" 5.590 FTS 821 25 25 3" 6.070 FTS 821 27 27 3" 6.560 FTS 821 29 29 3" 7.050
35
flat-top conveyor sprockets
Product Part # Teeth Face OD#880 Sprocket FTS 880 09 9 5/8" 4.33 FTS 880 10 10 5/8" 4.82 FTS 880 11 11 5/8" 5.31 FTS 880 12 12 5/8" 5.80 FTS 880 15 15 5/8" 7.26
Product Part # Teeth Face OD#881 Sprocket* FTS 881 21 21 1 1/4" 5.124 FTS 881 23 23 1 1/4" 5.590 FTS 881 25 25 1 1/4" 6.070
Product Part # Teeth Face OD#882 Sprocket FTS 882 09 9 7/8" 4.43 FTS 882 10 10 7/8" 4.92 FTS 882 11 11 7/8" 5.41 FTS 882 12 12 7/8" 5.90 FTS 882 15 15 7/8"
36 DiversifieD Plastics, inc.
flat-top Idler Wheels
21 SUHW0021 5.110 3/4 2 1/2 23 SUHW0023 5.600 3/4 2 1/2 25 SUHW0025 6.090 3/4 2 1/2
Equivalent Part No. Outside BoreTooth Size Dia. (in.) Stock Max.
Flat Top Idler Wheels For 815, 820, 831, 880* & 881* Chains
FUHR1013 3.984 2FUHR1018 5.658 2FUHR1023 7.400 2
All idler wheels include standard keywayand stainless steel setscrew.Specify bore size when ordering.
Part No. O.D. Face Width (in.)
Flat Wire Belt Idler Wheels
Specify bore size when ordering* For 880 & 881 chains equivalent tooth sizes are 10-1/2, 11-1/2 and 12-1/2
37
mIll chaIn sprocket
DRIVE SPROCKET, bolt-on-drive
SPLIT
STYLES AVAILABLEA A PlateB B Style, hub on one sideC C Style, hub on both sidesD Drive SprocketS SplitX Special
SPROCKET 7 3" 4" A,B,C,D,S,X#78/81X 8 3" 4" A,B,C,D,S,X 9 3" 4" A,B,C,D,S,X 10 3" 4" A,B,C,D,S,X 11 3" 4" A,B,C,D,S,X 12 3" 4-1/2" A,B,C,D,S,X 13 3" 4-1/2" A,B,C,D,S,X 14 3" 4-1/2" A,B,C,D,S,X 15 3" 4-1/2" A,B,C,D,S,X
SPROCKET 8 3-1/4" 4" A,B,C,D,S,X#82 9 3-1/4" 4" A,B,C,D,S,X 10 3-1/4" 4" A,B,C,D,S,X 11 3-1/4" 4" A,B,C,D,S,X 12 3-1/4" 4" A,B,C,D,S,X 13 3-1/4" 4" A,B,C,D,S,X 14 3-1/4" 4" A,B,C,D,S,X 15 3-1/4" 4" A,B,C,D,S,X
SPROCKET 9 4" 5" A,B,C,D,S,X#124 10 4" 5" A,B,C,D,S,X 11 4" 5" A,B,C,D,S,X 12 4" 5" A,B,C,D,S,X 13 4" 5" A,B,C,D,S,X
SPROCKET 9 3" 4" A,B,C,D,S,X#131/138 10 3" 4" A,B,C,D,S,X 11 3" 4" A,B,C,D,S,X 12 3" 4" A,B,C,D,S,X 13 3" 4" A,B,C,D,S,X 14 3" 4" A,B,C,D,S,X
SPROCKET 8 6" 8-1/2" A,B,C,D,S,X#132 9 6" 8-1/2" A,B,C,D,S,X 10 6" 8-1/2" A,B,C,D,S,X 11 6" 8-1/2" A,B,C,D,S,X 12 6" 8-1/2" A,B,C,D,S,X
Product Part# LengthThrough
BoreTeeth Hub.
Dia Style
MC7807MC7808MC7809MC7810MC7811MC7812MC7813MC7814MC7815
MC8208MC8209MC8210MC8211MC8212MC8213MC8214MC8215
MC12409MC12410MC12411MC12412MC12413
MC13109MC13110MC13111MC13112MC13113MC13114
MC13208MC13209MC13210MC13211MC13212
Diversified Plastics Mill Chain sprockets are offered in your choice of UHMW, Polyurethane, or Nylon. They provide impact and corrosion resistance while at the same time they protect your chain and reduce operating noise. UHMW idler sprockets require no lubrication. Polyurethane and Nylon sprockets are provided with grease zirks. Our drive sprockets include a bolt on steel hub plate and are offered in your preferred taper lock style, or in straight bore. Listed below are some of our standard sizes. Call us for your custom requirements.
38 DiversifieD Plastics, inc.
drag chaIn sprocketDiversified Plastics’ Drag Chain Sprockets are designed to increase the life of your expensive chain runs. The solid UHMW teeth absorb system shock and eliminate the steel to steel contact that damages chain barrels and side bars. Drive versions are provided with heavy duty reusable steel hubs that are available in straight bore, or taper lock design. They also include replaceable UHMW A Plate teeth that can be provided solid or split. Idlers are available with “No Lube” bores. All sizes and tooth profiles are available. Some of our standard sizes are listed below
Medium Duty
Heavy Duty
STYLE:A A PlateB B Style, hub on one sideC C Style, hub on both sidesD Drive SprocketS SplitX Special
SPROCKET 8 4-1/8"#104 9 4-1/8" 10 4-1/8" 11 4-1/8"
SPROCKET 8 9"#110 9 9" 10 9" 11 9" 12 9
SPROCKET 7 9"#112 8 9" 9 9" 10 9"
SPROCKET 7 13"#116 8 13" 9 13" 10 13”
SPROCKET 6 8-3/4"#122 7 8-3/4" 8 8-3/4" 10 8-3/4”
SPROCKET 7 11"#480 8 11" 9 11" 10 11" 11 11" 12 11"
Part # Teeth FaceProduct
MC10408MC10409MC10410MC10411
MC11008MC11009MC11010MC11011MC11012
MC11207MC11208MC11209MC11210
MC11607MC11608MC11609MC11610
MC12206MC12207MC12208MC12210
MC48007MC48008MC48009MC48010MC48011MC48012
39
drag chaIn Idler drums
Diversified Plastics solid UHMW Idler Drums increase the life of your expensive chain runs by absorbing system shock and eliminating the steel to steel contact that causes barrel and side damage. The long wearing “No Lube” bore eliminates the need to grease, and reduces maintenance costs. Custom sizes are available. Some of our standard sizes are listed below.
DRUM DRUM1208 12" 8"#104 DRUM1408 14" 8" DRUM1608 16" 8" DRUM DRUM1414 14" 14"#110 & 112 DRUM1614 16" 14" DRUM1814 18" 14" DRUM2014 20" 14"
DRUM DRUM1418 14" 18"#116 & 480 DRUM1618 16" 18" DRUM1818 18" 18" DRUM 2018 20" 18"
DRUM DRUM1415 14" 15"#122 DRUM1615 16" 15" DRUM1815 18" 15" DRUM2015 20" 15"
ProductOutside
DiameterLengthOverallPart #
Outside Dia.
Length
40 DiversifieD Plastics, inc.
gears
drIve components
41
spur gearsPlastic gears provide for smooth quiet operation without lubrication. Listed below is a sampling of our standard sizes. Other sizes and materials available upon request.
*To order, specify face width and material preference.
3DP DP3P15 15 200/14-1/20 5.000" 3/4" A,B,C,D,X DP3P18 18 200/14-1/20 6.000" 3/4" A,B,C,D,X DP3P20 20 200/14-1/20 6.667" 3/4" A,B,C,D,X DP3P24 24 200/14-1/20 8.000" 3/4" A,B,C,D,X DP3P30 30 200/14-1/20 10.000" 3/4" A,B,C,D,X DP3P36 36 200/14-1/20 12.000" 3/4" A,B,C,D,X DP3P42 42 200/14-1/20 14.000" 3/4" A,B,C,D,X DP3P48 48 200/14-1/20 16.000" 3/4" A,B,C,D,X DP3P54 54 200/14-1/20 18.000" 3/4" A,B,C,D,X DP3P60 60 200/14-1/20 20.000" 3/4" A,B,C,D,X4DP DP4P15 15 200/14-1/20 3.750" 3/4" A,B,C,D,X DP4P18 18 200/14-1/20 4.500" 3/4" A,B,C,D,X DP4P20 20 200/14-1/20 5.000" 3/4" A,B,C,D,X DP4P24 24 200/14-1/20 6.000" 3/4" A,B,C,D,X DP4P30 30 200/14-1/20 7.500" 3/4" A,B,C,D,X DP4P36 36 200/14-1/20 9.000" 3/4" A,B,C,D,X DP4P42 42 200/14-1/20 10.500" 3/4" A,B,C,D,X DP4P48 48 200/14-1/20 12.000" 3/4" A,B,C,D,X DP4P54 54 200/14-1/20 13.500" 3/4" A,B,C,D,X DP4P60 60 200/14-1/20 15.000" 3/4" A,B,C,D,X5DP DP5P15 15 200/14-1/20 3.000" 3/4" A,B,C,D,X DP5P18 18 200/14-1/20 3.600" 3/4" A,B,C,D,X DP5P20 20 200/14-1/20 4.000" 3/4" A,B,C,D,X DP5P24 24 200/14-1/20 4.800" 3/4" A,B,C,D,X DP5P28 28 200/14-1/20 5.600" 3/4" A,B,C,D,X DP5P40 40 200/14-1/20 8.000" 3/4" A,B,C,D,X DP5P50 50 200/14-1/20 10.000" 3/4" A,B,C,D,X DP5P60 60 200/14-1/20 12.000" 3/4" A,B,C,D,X DP5P80 80 200/14-1/20 16.000" 3/4" A,B,C,D,X6DP DP6P12 12 200/14-1/20 2.000" 3/4" A,B,C,D,X DP6P18 18 200/14-1/20 3.000" 3/4" A,B,C,D,X DP6P24 24 200/14-1/20 4.000" 3/4" A,B,C,D,X DP6P36 36 200/14-1/20 6.000" 3/4" A,B,C,D,X DP6P48 48 200/14-1/20 8.000" 3/4" A,B,C,D,X DP6P60 60 200/14-1/20 10.000" 3/4" A,B,C,D,X DP6P72 72 200/14-1/20 12.000" 3/4" A,B,C,D,X8DP DP8P12 12 200/14-1/20 1.500" 3/4" A,B,C,D,X DP8P18 18 200/14-1/20 2.250" 3/4" A,B,C,D,X DP8P24 24 200/14-1/20 3.000" 3/4" A,B,C,D,X DP8P30 30 200/14-1/20 3.750" 3/4" A,B,C,D,X DP8P36 36 200/14-1/20 4.500" 3/4" A,B,C,D,X DP8P48 48 200/14-1/20 6.000" 3/4" A,B,C,D,X 10DP DP10P15 15 200/14-1/20 1.500" 1/2" A,B,C,D,X DP10P18 18 200/14-1/20 2.000" 1/2" A,B,C,D,X DP10P28 28 200/14-1/20 2.400" 1/2" A,B,C,D,X DP10P32 32 200/14-1/20 3.200" 1/2" A,B,C,D,X DP10P48 48 200/14-1/20 4.800" 1/2" A,B,C,D,X DP10P54 54 200/14-1/20 5.400" 1/2" A,B,C,D,X DP10P60 60 200/14-1/20 6.000" 1/2" A,B,C,D,X12DP DP12P15 15 200/14-1/20 1.250" 1/2" A,B,C,D,X DP12P20 20 200/14-1/20 1.667" 1/2" A,B,C,D,X DP12P24 24 200/14-1/20 2.000" 1/2" A,B,C,D,X DP12P28 28 200/14-1/20 2.333" 1/2" A,B,C,D,X DP12P34 34 200/14-1/20 2.833" 1/2" A,B,C,D,X DP12P48 48 200/14-1/20 4.000" 1/2" A,B,C,D,X DP12P60 60 200/14-1/20 5.000" 1/2" A,B,C,D,X
STYLES AVAILABLEA—A PlateB—B Style, hub on one sideC—C Style, hub on both sidesD—Drive SprocketS—SplitX—Special
DRIVE SPROCKET, bolt-on-drive
Product Part # Teeth Pressure Pitch Stock Extension Angle Dia. Bore
42 DiversifieD Plastics, inc.
gear racks
Gear Racks made from engineered plastics provide smooth, quiet operation, and most material offerings require no lubrication. Feel free to call as with any custom requirements you may have.
3 DPGR2403 3 1-1/2 1.167 4 DPGR2404 2 1-1/2 1.250 4 DPGR3204 2 2 1.750 5 DPGR2005 1-3/4 1-1/4 1.050 5 DPGR2405 1-3/4 1-1/2 1.300 6 DPGR1606 1-1/2 1 .833 6 DPGR2406 1-1/2 1-1/2 1.333 8 DPGR1208 1-1/4 3/4 .625 8 DPGR2008 1-1/4 1-1/4 1.125 10 DPGR1010 1 5/8 .525 10 DPGR1610 1 1 .900 12 DPGR0812 3/4 1/2 .417 12 DPGR1212 3/4 3/4 .667 16 DPGR0816 1/2 1/2 .438 20 DPGR0620 3/8 3/8 .325
Diametral Face Width Overall Pitch Line Pitch Part No. (in.) Thick. (in.) Backing
*Gear Rack is available in nominal 4’ lengths.Please specify for gear racks with matched ends.
*When ordering please specify 14-1/20 PA or 200 PA
Color: GreenGear Racks 14-1/2° PA
3 DPGR2403 3 1-1/2 1.167 4 DPGR2404 2 1-1/2 1.250 4 DPGR3204 2 2 1.750 5 DPGR2005 1-3/4 1-1/4 1.050 5 DPGR2405 1-3/4 1-1/2 1.300 6 DPGR1606 1-1/2 1 .833 6 DPGR2406 1-1/2 1-1/2 1.333 8 DPGR1208 1-1/4 3/4 .625 8 DPGR2008 1-1/4 1-1/4 1.125 10 DPGR1010 1 5/8 .525 10 DPGR1610 1 1 .900 12 DPGR0812 3/4 1/2 .417 12 DPGR1212 3/4 3/4 .667 16 DPGR0516 1/2 5/16 .250 16 DPGR0816 1/2 1/2 .438 20 DPGR0620 3/8 3/8 .325
Diametral Face Width Overall Pitch Line Pitch Part No. (in.) Thick. (in.) Backing
Color: GreenGear Racks 20° PA
Materials AvailableNatural UHMW P.E.*Natural Nylon*Molly Filled NylonOil Filled Nylon*PolyurethaneLaminate*FDA/USDA ApprovedEach material offers it's own unique characteristics includ-ing, Temperature/Load Speed/Coefficient of friction.
43
BeltIng & accessorIes
drIve components
44 DiversifieD Plastics, inc.
B7 serIes plastIc modular BeltIng
Flighted Modules and Sideguards are available in all the same materials as the above modules. The com-mon heights are 1", 2", 3" and 6". We manufacture our own molds and can customize any BELTING MOD-ULES, FLIGHTS or SIDEGUARDS to meet your own unique needs.
Strength Operating USDA UV Part# Material used with Engineering Formulas Temp. Range FDA Stabilized Color B7WTPP Polypropylene (cp) 1600 lbs/ft width -60° to 220°F yes yes white B7WTPE Polyethylene 1280 lbs/ft width -60° to 160°F yes yes white B7WTAC Acetal 2600 lbs/ft width -40° to 200°F yes yes natural B7NGFN Glass Filled Nylon 2800 lbs/ft width -40° to 350°F no yes natural B7WTUH UHMW/PE 1280 lbs/ft width -100° to 160°F yes yes white
10% Open Area
MODULES
Length Molded Machined Part# Pitch Dia. Teeth Thru Bore Acetal UHMW B706 3.79" 6 .8" X X B710 6.44" 10 .8" X X B713 8.43" 13 .8" X B716 10.32" 16 .8" X
SPROCKETS
*6" *9/16"
*2"pitch
*Dimensions vary with materials
All other sizes available machined.
NOTE: Not all products are stock and minimum runs may apply.
45
B8 serIes plastIc modular BeltIng
NOTE: Not all products are stock and minimum runs may apply.
Flighted Modules and Sideguards are available in all the same materials as the above modules. The com-mon heights are 1", 2", 3" and 6". We manufacture our own molds and can customize any BELTING MOD-ULES, FLIGHTS or SIDEGUARDS to meet your own unique needs.
Strength Operating USDA UV Part# Material used with Engineering Formulas Temp. Range FDA Stabilized Color B8WTPP Polypropylene (cp) 1600 lbs/ft width -60° to 220°F yes yes white B8WTPE Polyethylene 1280 lbs/ft width -60° to 160°F yes yes white B8WTAC Acetal 2600 lbs/ft width -40° to 200°F yes yes natural B8NGFN Glass Filled Nylon 2800 lbs/ft width -40° to 350°F no yes natural B8WTUH UHMW/PE 1280 lbs/ft width -100° to 160°F yes yes white
24% Open Area
MODULES
Length Molded Machined Part# Pitch Dia. Teeth Thru Bore Acetal UHMW B806 3.79" 6 .8" X X B810 6.44" 10 .8" X X B813 8.43" 13 .8" X B816 10.32" 16 .8" X
SPROCKETS
*6" *9/16"
*2"pitch
*Dimensions vary with materials
All other sizes available machined.
46 DiversifieD Plastics, inc.
B9 serIes plastIc modular BeltIng
Flighted Modules and Sideguards are available in all the same materials as the above modules. The common heights are 1", 2", 3" and 6". We manufacture our own molds and can customize any BELTING MODULES, FLIGHTS or SIDEGUARDS to meet your own unique needs.
Strength Operating USDA UV Part# Material used with Engineering Formulas Temp. Range FDA Stabilized Color B9WTPP Polypropylene (cp) 2000 lbs/ft width -60° to 220°F yes yes white B9WTPE Polyethylene 1600 lbs/ft width -60° to 160°F yes yes white B9WTAC Acetal 2800 lbs/ft width -40° to 200°F yes yes natural B9NGFN Glass Filled Nylon 3000 lbs/ft width -40° to 350°F no yes natural B9WTUH UHMW/PE 1600 lbs/ft width -100° to 160°F yes yes white
0% Open Area
MODULES
Length Molded Machined Part# Pitch Dia. Teeth Thru Bore Acetal UHMW B906 3.79" 6 .8" X X B910 6.44" 10 .8" X X B913 8.43" 13 .8" X B916 10.32" 16 .8" X
SPROCKETS
*6" *9/16"
*2"pitch
*Dimensions vary with materials
All other sizes available machined.
NOTE: Not all products are stock and minimum runs may apply.
47
B13 serIes plastIc modular BeltIng
Flighted Modules are available in all the same materials as the above modules. The standard height is 1-1/2". We manufacture our own molds and can customize any BELTING MODULES, FLIGHTS or SIDEGUARDS to meet your own unique needs.
Strength Operating USDA UV Part# Material used with Engineering Formulas Temp. Range FDA Stabilized Color B13WTPP Polypropylene (cp) 450 lbs/ft width -60° to 220°F yes yes white B13WTPE Polyethylene 350 lbs/ft width -60° to 160°F yes yes white B13WTAC Acetal 875 lbs/ft width -40° to 200°F yes yes natural B13NGFN Glass Filled Nylon 1000 lbs/ft width -40° to 350°F no yes natural B13WTUH UHMW/PE 350 lbs/ft width -100° to 160°F yes yes white
31% Open Area
MODULES
Length Molded Machined Part# Hub Dia. Teeth Thru Bore UHMW UHMW B1315 2.09" 15 2" XB1320 2.88" 20 2" X B1325 3.67" 25 2" X B1335 5.26" 35 2" X B1345 6.85" 45 2" X
SPROCKETS
*6" *5/16"
*Dimensions vary with materials
*1/2"pitch
All other sizes available machined.
NOTE: Not all products are stock and minimum runs may apply.
Our B13 Belt will also run on standard40 pitch Roller Chain Sprockets.
48 DiversifieD Plastics, inc.
B14 serIes plastIc modular BeltIng
NOTE: Not all products are stock and minimum runs may apply.
Flighted Modules are available in all the same materials as the above modules. The standard height is 1-1/2”. We manufacture our own molds and can customize any BELTING MODULES, FLIGHTS or SIDEGUARDS to meet your own unique needs.
Strength Operating USDA UV Part# Material used with Engineering Formulas Temp. Range FDA Stabilized Color B14WTPP Polypropylene (cp) 450 lbs/ft width -60° to 220°F yes yes white B14WTPE Polyethylene 350 lbs/ft width -60° to 160°F yes yes white B14WTAC Acetal 875 lbs/ft width -40° to 200°F yes yes natural B14NGFN Glass Filled Nylon 1000 lbs/ft width -40° to 350°F no yes natural B14WTUH UHMW/PE 350 lbs/ft width -100° to 160°F yes yes white
59% Open Area
MODULES
Length Molded Machined Part# Hub Dia. Teeth Thru Bore UHMW UHMW B1407 1.89" 7 1 7/8 X X B1409 2.65" 9 1 7/8 X B1413 3.90" 13 1 7/8 X B1418 5.65" 18 1 7/8 X X B1423 7.42" 23 2" X
SPROCKETS
*6" *5/16"*1"
All other sizes available machined.
*Dimensions vary with materials
49
B15 serIes plastIc modular BeltIng
At Diversified Plastics we manufacture our own molds and can customize any BELTING MOD-ULES, FLIGHTS or SIDEGUARDS to meet your own unique needs.
Strength Operating USDA UV Part# Material used with Engineering Formulas Temp. Range FDA Stabilized Color B15WTPP Polypropylene (cp) 450 lbs/ft width -60° to 220°F yes yes white B15WTPE Polyethylene 350 lbs/ft width -60° to 160°F yes yes white B15WTAC Acetal 875 lbs/ft width -40° to 200°F yes yes natural B15NGFN Glass Filled Nylon 1000 lbs/ft width -40° to 350°F no yes natural B15WTUH UHMW/PE 350 lbs/ft width -100° to 160°F yes yes white
64% Open Area
MODULES
Length Molded Machined Part# Hub Dia. Teeth Thru Bore UHMW UHMW B1507 1.89" 7 1 7/8 X X B1509 2.65" 9 1 7/8 X B1513 3.90" 13 1 7/8 X B1518 5.65" 18 1 7/8 X X B1523 7.42" 23 2" X
SPROCKETS
*6 3/16" *5/16"
*1"
*Dimensions vary with materials
All other sizes available machined.
NOTE: Not all products are stock and minimum runs may apply.
50 DiversifieD Plastics, inc.
B16 serIes plastIc modular BeltIng
At Diversified Plastics we manufacture our own molds and can customize any BELTING MOD-ULES, FLIGHTS or SIDEGUARDS to meet your own unique needs.
Strength Operating USDA UV Part# Material used with Engineering Formulas Temp. Range FDA Stabilized Color B16WTPP Polypropylene (cp) 450 lbs/ft width -60° to 220°F yes yes white B16WTPE Polyethylene 350 lbs/ft width -60° to 160°F yes yes white B16WTAC Acetal 875 lbs/ft width -40° to 200°F yes yes natural B16NGFN Glass Filled Nylon 1000 lbs/ft width -40° to 350°F no yes natural B16WTUH UHMW/PE 350 lbs/ft width -100° to 160°F yes yes white
66% Open Area
MODULES
Length Molded Machined Part# Hub Dia. Teeth Thru Bore UHMW UHMW B1607 1.89" 7 1 7/8 X X B1609 2.65" 9 1 7/8 X B1613 3.90" 13 1 7/8 X B1618 5.65" 18 1 7/8 X X B1623 7.42" 23 2" X
SPROCKETS
*6 1/4" *5/16"
*1"
All other sizes available machined.
NOTE: Not all products are stock and minimum runs may apply.
*Dimensions vary with materials
51
Belt pulleys
drIve components
52 DiversifieD Plastics, inc.
tImIng Belt pulleys
All of Diversified Plastics Timing Belt Pulleys offer a quiet, light weight, and corrosion resistant alternative to conventional pulleys. Many of the materials we make available are FDA/USDA approved for use in the food products industry. We offer a full range of pitches as well as a complete range of teeth providing maximum options for ration combinations. We have pulley designs to interchange with all major belt manufacturers. Ordering is easy with the information below, or call with any custom requirements you might have.
Belt Pitch _____________________________Belt Width ____________________________Belt Manufacturer ______________________Number of Teeth _______________________Hub Style (A, B, C, Drive) ________________Bore Style and Size (P, I, S, FK) ___________Material Choice ________________________Flanges Required (yes/no) _______________
Material Guide
U - Natural UHMW* N - Natural Nylon* NM - “Molly” Filled Nylon D - Delrin*
*FDA/USDA Approved
Bore Style
P - Pilot I - Idler (+ tolerance) F - Finished Straight Bore FK - Finished Bore w/Keyway and set
screwBR - Bearing of Choice
53
hIgh torque (Belt) drIve sprockets
All of Diversified Plastics High torque drive sprockets offer a quiet, light weight, and corrosion resistant alternative to conventional steel sprockets. Many of the materials we make available are FDA/USDA approved for use in the food products industry. We offer a full range of pitches as well as a complete range of teeth, allowing for greater freedom in calculating drive ratios. We have sprocket designs to interchange with all major belt manufacturers. Ordering is easy with the information below, or call with any custom requirements you might have.
Belt Pitch _____________________________Belt Width ____________________________Belt Manufacturer ______________________Number of Teeth _______________________Hub Style (A, B, C, Drive) ________________Bore Style and Size (P, I, S, FK) ___________Material Choice ________________________Flanges Required (yes/no) _______________
Material Guide
U - Natural UHMW* N - Natural Nylon* NM - “Molly” Filled Nylon D - Delrin*
*FDA/USDA Approved
Bore Style
P - Pilot I - Idler (+ tolerance) F - Finished Straight Bore FK - Finished Bore w/Keyway and set
screwBR - Bearing of Choice
54 DiversifieD Plastics, inc.
v Belt sheaves
• Specify bore size (and keyway if required) when ordering.
• Multiple groove, Deep groove, and customs available upon request.
• Please Specify A or B Belt
Material ChartN-Natural UHMWR-Reprocessed UHMWO-Others Upon Request
DPVB1015 1.50 1.75 3/4 1/4DPVB1018 1.80 2.05 3/4 1/4DPVB1019 1.90 2.05 3/4 1/4DPVB1020 2.00 2.25 3/4 1/4DPVB1021 2.10 2.35 3/4 1/4DPVB1023 2.30 2.55 3/4 1/4DPVB1024 2.40 2.65 3/4 1/4DPVB1025 2.50 2.75 3/4 1/4DPVB1026 2.60 2.85 3/4 1/4DPVB1028 2.80 3.05 3/4 1/4DPVB1030 3.00 3.25 3/4 1/4DPVB1032 3.20 3.45 3/4 1/2DPVB1034 3.40 3.65 3/4 1/2DPVB1036 3.60 3.85 3/4 1/2DPVB1038 3.80 4.05 3/4 1/2DPVB1040 4.00 4.25 3/4 1/2DPVB1042 4.20 4.45 3/4 1/2DPVB1044 4.40 4.65 3/4 1/2DPVB1046 4.60 4.85 3/4 1/2DPVB1048 4.80 5.05 3/4 1/2DPVB1050 5.00 5.25 3/4 1/2DPVB1052 5.20 5.45 3/4 1/2DPVB1054 5.40 5.65 3/4 1/2 DPVB1056 5.60 5.85 3/4 1/2DPVB1058 5.80 6.05 3/4 1/2DPVB1060 6.00 6.25 3/4 1/2DPVB1062 6.20 6.45 3/4 1/2DPVB1064 6.40 6.65 3/4 1/2DPVB1070 7.00 7.25 3/4 1/2DPVB1082 8.20 8.45 3/4 1/2DPVB1090 9.00 9.25 3/4 1/2DPVB1106 10.60 10.85 3/4 1/2DPVB1120 12.00 12.25 3/4 1/2
Part No. PD OD W Stock Bore
V Belt Sheaves, A Belt
DPVB1034 3.40 3.75 1 1/2DPVB1036 3.60 3.95 1 1/2DPVB1038 3.80 4.15 1 1/2DPVB1040 4.00 4.35 1 1/2DPVB1042 4.20 4.55 1 1/2DPVB1044 4.40 4.75 1 1/2DPVB1046 4.60 4.95 1 1/2DPVB1048 4.80 5.15 1 1/2DPVB1050 5.00 5.35 1 1/2DPVB1052 5.20 5.55 1 1/2DPVB1054 5.40 5.75 1 1/2DPVB1056 5.60 5.95 1 1/2DPVB1058 5.80 6.15 1 1/2DPVB1060 6.00 6.35 1 1/2DPVB1062 6.20 6.55 1 1/2DPVB1064 6.40 6.75 1 1/2DPVB1066 6.60 6.95 1 1/2DPVB1068 6.80 7.15 1 1/2DPVB1074 7.40 7.75 1 1/2DPVB1086 8.60 8.95 1 1/2DPVB1094 9.40 9.75 1 1/2DPVB1110 11.00 11.35 1 1/2DPVB1124 12.40 12.75 1 1/2
Part No. PD OD W Stock Bore
V Belt Sheaves, B Belt
V-Belt Sheaves are available in a wide variety of materials and configurations to meet your needs. Options such as multiple belt sheaves, or inserted bearings are available upon request. Listed below are a few of our standard sizes. Feel free to call us with your custom requirements.
55
can lIne pulley
FEATURES: APPLICATIONS:• Noise Reduction • Cable Conveying lines• Corrosion Resistant • Food Processing Plants• Extends Life of Cable • Canning Plants
SIZES: MATERIALS:• 3” O.D. x 5/8” Width for 5/16” Cable • Molded Green UHMW• All other machined sizes available.
• Available with a variety of bushing options.
Our Molded UHMW Can Line Pulleys offer a competitively priced alternative to conventional machined products. Many bore configurations are available to meet your specific requirements.
56 DiversifieD Plastics, inc.
Wheels & rollers
drIve components
57
Wheels & rollersPlastic Wheels offer a wide range of advantages to our customers. They are gentle on finished product when used in conveyance systems. They offer quick operation, and when used as idlers in most cases they need no bearing and require no lubrication. Call us with any of your custom requirements.
Part No. Type OD ID TW OW HD RD D R (in.) (in.) Tread Overall Hub Recess Recess Radius Width Width Dia. Dia. Depth DPRW2001 F 3/8 .095 3/8 - - 3/16 1/8 1/8DPRW2002 F 1/2 .190 3/8 - - 3/8 1/16 1/16DPRW2003 F 5/8 .187 5/16 - - 5/16 1/8 1/16DPRW2004 H 3/4 .201 1/4 9/32 5/16 21/32 1/16 1/16DPRW2005 E 3/4 .264 1/2 - - - - 1/8DPRW2006 G 7/8 .139 3/8 7/16 1/2 - - 1/8DPRW2007 F 1 .201 1/2 - - 9/16 3/32 1/16DPRW2008 E 1-1/8 .264 3/8 - - - - 1/8DPRW2009 H 1-1/8 .326 3/8 7/16 1/2 5/8 1/16 1/8DPRW2010 E 2 .641 1/8 - - - - 1/16
Wheels & Rollers - Radius Edges
Wheels & Rollers - Chamfered Edges
Part No. Type OD ID TW OW WW HD RD D Chamfer (in.) (in.) Tread Overall Wheel Hub Recess Recess Width Width Width Dia. Dia. Depth DPCW3001 L 3/4 .326 7/32 1/2 9/32 1/2 9/16 1/32 45° X 1/32DPCW3002 I 7/8 .326 1/4 - 5/16 - - - 45° X 1/32DPCW3003 L 7/8 .375 3/16 3/8 1/4 1/2 1/2 1/32 45° X 1/32DPCW3004 K 7/8 .389 3/16 3/8 1/4 1/2 - - 45° X 1/32DPCW3005 J 15/16 .375 5/16 - 3/8 - - - 45° X 1/32DPCW3006 K 15/16 .389 3/16 3/8 1/4 1/2 1/2 1/16 45° X 1/32DPCW3007 I 1 .750 1/2 - 5/8 - - - 45° X 1/16DPCW3008 J 1 .389 3/16 - 1/4 - 13/16 1/16 45° X 1/32DPCW3009 I 1-1/16 .326 1/4 - 3/8 - - - 45° X 1/16DPCW3010 L 1-1/16 .389 3/32 9/16 9/32 5/8 5/8 1/16 45° X 1/32DPCW3011 I 1-1/2 .505 1 - 1-1/4 - - - 45° X 1/8
Materials AvailableNatural UHMW P.E.*Natural Nylon*Molly Filled NylonOil Filled Nylon*PolyurethaneLaminate*FDA/USDA ApprovedEach material offers it's own unique characteristics includ-ing, Temperature/Load Speed/Coefficient of friction.
58 DiversifieD Plastics, inc.
molded rollers
DPI molds 3", 4", 5" and 6" diameter rollers often used for components in replacement conveyor idlers for OEM's and end users. Because they are molded from UH-PE they are inexpensive and widely used in timber industries, mining, food processing, etc. Below is a sampling of our most popular sizes. We do have other molded sizes as well as machined sizes available. Call us for your special needs.
Part # Face
Style B
“Face”
Style A
“Face”
O.D.Style
MW032 A 3" 2" MW043 A 4" 3" MW046 A 4" 6" MW053 A 5" 3" MW051.5 A 5" 1 1/2" MW0125 B 1 1/4" 5/8" MW0150 B 1 1/2" 1/4" MW052 B 5" 2-3/16" MW062 B 6" 2-3/16"
59
augers & accessorIes
drIve components
60 DiversifieD Plastics, inc.
IndustrIal augersDiversified Plastics offers Auger solutions to a wide variety of industries. From 4” diameter to 40” diameter our industrial augers solve the tough problems. Our patented UHMW full face ribbons are available in single flight sectional, or continuous flighting. They are abrasion resistant, non-corroding, and provide a non-stick surface. We also build a full line of FDA/USDA approved augers suitable from washdown to food contact. We provide variable pitch and diameters. Our ability to utilize special materials such as urethane, gives us a broad range of problem solving solutions. By incorporating our augers with our UHMW auger pans we can also provide complete systems to address your problems. Below is a small sampling of our common sizes. Call us with your special size or material needs.
Extension Key:C-continuous flightingS-sectional flighting
Continuous Flighting
Sectional Flight
AU0909 BP2.0 9" 9" 2" sch 40 9'-10"AU0909 BP2.5 9" 9" 2 1/2" sch 40 9'-10" AU1212 BP2.5 12" 12" 2 1/2" sch 40 11'-10"AU1212 BP3.0 12" 12" 3" sch 40 11'-10" AU1414 BP3.0 14" 14" 3" sch 40 11'-10"AU1414 BP3.5 14" 14" 3 1/2" sch 40 11'-10"
Pitch LengthO.D. PipePart #
Augers
AF 0909 2.0 9" 9" 2" sch 40AF 0909 2.5 9" 9" 2 1/2" sch 40AF 1212 2.5 12" 12" 2 1/2" sch 40AF 1212 3.0 12" 12" 3" sch 40AF 1414 3.0 14" 14" 3" sch 40AF 1414 3.5 14" 14" 3 1/2" sch 40
Part # O.D. Pitch Pipe
Flighting Only
61
IndustrIal auger applIcatIon
Hog fuel Screw Auger: Customer’s auger is buried under hog fuel pile 24/7. Even after experimenting with special alloys and spray on products, they were only getting eight months life. Diversified applied its patented flighting and main beam cover system at a fraction of the cost of a new unit. This screw ran a full two years (24 months) tripling the run life and was rebuildable after the two years. Diversified also lined this pit (previously raw concrete) with UHMW. With the reduced coefficient of friction of both screw and floor, energy requirements were reduced by over 50% (results were tracked by a chart recorder placed at the m.c.c.).
Boiler Feed Screws: Customer was replacing feed screws and feed screw pans every two years. The 1⁄2” thick steel pans would be worn to as little as .050” thickness in that time. Diversified applied its patented process to the augers and supplied liners for the pans. Original bin is now four years old and still running. This customer has since re-done its other five bins with the same results.
Boiler Feed Screw Bearings: These 3-15⁄16” four bolt flange bearings replaced Rex Double Row spherical bearings. They require no lubrication, have provided long life, and in the event screw maintenance is needed, are easily removed from Stub Shafts. The old roller bearings would corrode and seize and would have to be cut off of the shaft.
62 DiversifieD Plastics, inc.
auger trough lIners
UHMW Auger Trough Liners are an excellent light weight insert to your existing worn trough. The low friction reduces the need for and even eliminates some hanger bearings. They are abrasion resistant, non-corrosive, and have a non-stick surface. Other sizes Available.
AL 06 6" 10' 3/16"AL 09 9" 10' 3/16"AL 10 10" 10' 3/16"AL 12 12" 12' 3/16"AL 14 14" 12' 3/16"
Part # Auger Size Length Thickness
Liners may also be ordered with Routered or Flanged edges as shown below.
63
meterIng & spIce augers
FEATURES:• USDA/FDA• Wear Resistant• Corrosion Resistant• Light Weight• Optional Steel Shaft
SIZES:• 3/4” O.D. to 10” O.D.• Up to 96” Length• Variable O.D. and variable
pitch available
APPLICATIONS:• Metering Applications• Food Processing Plants -Salt -Coffee -Sugar -Etc.
MATERIALS:• UHMW-PE• Nylon• Delrin
64 DiversifieD Plastics, inc.
hanger BearIngsHanger Bearings made from engineered plastics of-fer a number of problem solving advantages over their metal counterparts. Features such as self lubrication, enhanced abrasion resistance, and shock absorption are among the many advantages. Listed below are some of the many sizes and materials we offer. Feel free to call us with any custom requirements you may have.
• Materials for Industrial or USDA/FDA• Temperature Range from -200°F to +500°F
1 1-1/2 1-1/16 1-7/161-1/2 2-1/8 1-9/16 1-15/15
2 2-3/4 1-9/16 1-15/16 2-7/16 3-1/4 2-3/8 2-15/16 3 4 2-3/8 2-15/16 3-7/16 4-3/4 3-1/8 3-15/16
Shaft BD BL OL Size (ID)
Hanger Bearings for Screw Conveyors - Type 226
1-1/2 2-1/4 1-3/8 1-15/16 2 3-1/4 1-5/8 1-15/16 2-7/16 4 1-5/8 2-15/16 3 4-1/2 2-1/8 2-15/16 3-7/16 4-7/8 2-11/16 3-15/16
Shaft BD BL OL Size (ID)
Hanger Bearings for Screw Conveyors - Type 230
Materials AvailableNatural UHMW P.E.*Natural Nylon*Molly Filled NylonOil Filled Nylon*PolyurethaneLaminate*FDA/USDA ApprovedEach material offers it's own unique characteristics includ-ing, Temperature/Load Speed/Coefficient of friction.
Type 226, fits hanger styles, 226, 220, 326, 20B, 26B.
Type 230, fits hanger styles 230, 216, 316, 16B, 216F.
65
conveyor Belt accessorIes
drIve components
66 DiversifieD Plastics, inc.
rattle roll
FEATURES:• Longer Lasting (v.s. belt
scrapers)• Centralizes Waste Material• Cleans inverted cleats as well as
cleated belts through vibration.• Running two dissimilar tooth
profiles in tandem provide even greater vibration and cleaning.
• Abrasion & Corrosion Resistant
SIZES:• 6-Tooth • 7-Tooth• 8-Tooth• 9-Tooth• All widths available
APPLICATIONS:• Used on conveyors in place of
belt scrapers etc.
MATERIALS:• UHMW with Steel or Stainless
Steel Shafting
67
Impact conveyor retro-fIts
FEATURES: APPLICATIONS: • High Wear • Loading Zones and • Impact Resistant Impact Areas of • Retro-fits Available Conveyor Belt System • Evenly Distributes Load in Impact Zone
SIZES: MATERIALS: • Various Sizes • UHMW
68 DiversifieD Plastics, inc.
vIBrIatory conveyor replacement sprIngs
BG
H
H
F
E A
C
A= __________ThicknessB= __________WidthC= __________LengthD= __________Total # of HolesE= __________Hole DiameterF= __________Length To Hole CenterG= __________Width To Hole CenterH= __________Hole Center to Hole CenterI=___________Manufacturer of the ConveyorJ= __________ApplicationK= __________Quantity
Diversified Plastics manufactures all of its conveyor leaf springs from high performance “Composoflex®” materials, the same material used by many of the leading original equipment manufacturers. We can provide E-glass/epoxy springs in both uni-directional or cross-ply orientation. For truly abusive applications we offer a carbon/epoxy replacement that has been tested and used under the most extreme of conditions.
In an effort to make ordering easy and insure quality we will work from a sample, from your drawing, or simply fill out the form provided on this page. Contact one of our service representatives with any questions you might have.
BG
H
H
F
E A
C
A= __________ThicknessB= __________WidthC= __________LengthD= __________Total # of HolesE= __________Hole DiameterF= __________Length To Hole CenterG= __________Width To Hole CenterH= __________Hole Center to Hole CenterI=___________Manufacturer of the ConveyorJ= __________ApplicationK= __________Quantity
69
chaIn guIdes & attachments
drIve components
70 DiversifieD Plastics, inc.
chaIn guIdeUHMW Chain Guides have a very low coefficient of friction that results in lower energy consumption, increased chain life and significant reductions in operating costs. These UHMW guides are 6 times more abrasion resistant than steel, and absorb shock. Below are some of our standard profiles. Call us for these or any of your custom requirements.
81X5B 3/4” 1-1/4” 2” 3”785B 3/4” 1-1/4” 3-1/4” 4”
Part # A B C DMillchain Channel
81XC3 3/8” 5/8” 1-3/4” 2-7/16”78C4 1/2” 1” 3-1/16” 3-1/2”
Part # A B C D
81XC3W 3/8 5/8 1-3/4 2-7/16 1” 3/8 3/16
Part # A B C D E F G
RC40 1/2” 1/4” 3/4” 1”RC50 1/2” 1/4” 1” 1-1/4”RC60 5/8” 5/16” 1-1/4” 1-1/2”RC80 5/8” 3/8” 1-1/2 2RC100 3/4” 7/16” 1-13/16 2-1/4RC120 7/8” 9/16 2-1/4 3
Part # A B C DRollerchain Channel
Material ChartN-Natural UHMWR-Reprocessed UHMWO-Others Upon Request
*Fits in standard C3 or C4 Steel Channel
*Fits in standard C3 or C4 Steel Channel
RC40W 5/16 .140 11/16 1 1/4 .080RC50W 3/8 3/16 13/16 1-1/4 5/16 .100RC60W 1/2 .213 1-1/8 1-1/2 7/16 .115RC80W 1/2 1/4 1.340 2 9/16 .130RC100W 5/8 .312 1-7/8 2-1/4 3/4 .210RC120W 5/8 .375 2-1/4 2-3/4 7/8 .310
Part # A B C D E F
*Available in 10’ lengths
C
D
AB
C
D
A B
CD
ABE
G
F
CD
AB
E
F
CD
AB
*
*
RC40T 5/16 .080 1/4 1RC50T 5/16 .100 5/16 1-1/4RC60T 5/16 .115 7/16 1-1/4RC80T 3/8 .130 9/16 1-1/2RC100T 1/2 .210 11/16 2RC120T 1/2 .260 15/16 2-1/4
Part # A B C D
C
D
A
B
(If Requested)
71
chaIn guIde
Material ChartN-Natural UHMWR-Reprocessed UHMWO-Others Upon Request
25205 1/4” 2”25305 1/4” 3”375305 3/8” 3”5030305 1/2” 3”
Part # Thickness Width
Extruded Wear Strip(Coil Lengths)
* Extruded strip available in 250’ coils.* All other thicknesses (from 1/16” to 4”) and widths (from 1/2” to 48”) available in 10’ lengths.
503535A 1/2” 3 1/2” 3 1/2”503030A 1/2” 3” 3”252020A 1/4” 2” 2”251515A 1/4” 1 1/2” 1 1/2”
Part # A B CAngle
*Other shapes, materials and customs available. Please call for more information.Available in 10’ lengths.
B
C
A
72 DiversifieD Plastics, inc.
thIn gauge WearstrIp
(Available with or without PSA*)*Pressure Sensitive Adhesive Backstrip
Diversified Plastic offers a wide range of UHMW thin gauge wear strips. UHMW has an outstanding impact strength, is self lubricating, and also has a low coefficient of friction which reduces wear on opposing parts. Our thin gauge wearstrip is also available with PSA backing which eliminates the need for mechanical backing and opens up application possibilities where mechanical fastening isn't feasible.
FEATURES:• Available with PSA backing• Available in thicknesses ranging from .003" - .125"• Available in widths ranging from 1/4" - 24"• Standard black and natural• Custom color available• FDA and USDA approved
73
fasteners
Weld Washer Hole Drill
Part # Material Dia.(in)DPWW1125 Stainless Steel 1-3/8DPWW1375 Carbon Steel 1-3/8
Weld Washers Available in stainless steel for sanitary applications and carbon steel.
Part # Material Thickness Thickness (In.) DPWP2404 For 3/8" material 0.125 DPWP2408 For 1/2" material 0.250DPWP2412 For 3/4" material 0.500 DPWP2416 For 1" material 0.750
Weld PlugsUHMW plugs are designed to cover weld washers after sheet is fastened.
*Please Specify Black or Natural
Standard Counterbore Spade bit for Weld Washers
Weld Washers, Plugs & Weld Washer Hole Drill
74 DiversifieD Plastics, inc.
standard uhmW strIp fastenIng recommendatIons
120"
120"
120"
4"MAX
1-1/2" 1-1/2"12" 12" 12" 12" 12" 12" 12" 12" 12" 12"
1-1/2" 1-1/2"12" 12" 12" 12" 12" 12" 12" 12" 12" 12"
10"MAX
18"MAX
OVER18"
WIDE
UP TO
1-1/2"1-1/2" 12"12"12"12"12"24" 24" 24"
1-1/2"1-1/2" 12"12"12"12"12"24" 24" 24"
120"
OPTIONAL END PLUGS - DEPENDING ON WIDTH
MINIMUM OF ONE END PLUG EACH END
• Under 4" wide: 12" apart straight down center or strips
• 4" to 10" wide: staggered on 12" centers
• 11" to 18" wide: 12" apart down each edge
• Over 18" wide: 12" apart down each edge with intermediates every 24" down center or strip
75
dIversa-track - curved & straIght track for taBle top chaIn
FEATURES: INFORMATION NEEDED TO BUILDYOUR CUSTOM TRACK:
MATERIALS:
76 DiversifieD Plastics, inc.
uhmW oregon Bend
FEATURES:• Low Coefficient of Friction for
Smooth Chain Flow• Easy Installation• Can Be Made to Custom
Specifications• Protects Chain From Metal to
Metal Wear
MATERIALS:• Natural UHMW-PE
INFORMATION NEEDED TO BUILD YOUR CUSTOM OREGON BENDS• Inside Radius _________________________• Run Out Length (Top) ___________________________
• Run Out Length (Bottom) ________________________
• Chain Size ____________________________• With Centering Strip (Roller Chain Only)
☐ Yes ☐ No
77
drag flIghts (long lInk chaIn)
FEATURES: APPLICATIONS:• Light Weight • Waste Conveyors• Durable • Hog Fuel Conveyors• Easy to Assemble and Replace • Energy Saving
SIZES: MATERIALS:• Long Link Chain Sizes Available • UHMW• Varying From 12" - 36"
78 DiversifieD Plastics, inc.
chaIn tops
Weld-on Chain Tops are used widely in the lumber industry and have many advantages. The orange UHMW Chain Tops are great for applications where non-marking and back-up loads are a concern. The low friction surface is used in areas such as planed lumber conveyors, transfer conveyors, stackers/unstackers, etc. The softer High Grip Chain Tops are again non-marking and have a grip surface for areas with incline and decline. These Chain Tops are all manufactured with a large carrying surface and thick 12 gauge steel for easy welding.
CT 78UH UHMW 2 1/2" 2 5/8" 11/16" CT 78ST High Grip 2 1/2" 2 5/8" 11/16" CT 81UH UHMW 2 1/2" 2 1/8" 23/32" CT 81ST High Grip 2 1/2" 2 1/8" 23/32"CT 557UH UHMW 1 9/16" 2 1/8" 11/16"CT 557ST High Grip 1 9/16" 2 1/8" 11/16"
Length HeightMaterial WidthPart #
Length
Width
Height
79
floatensIoner™ chaIn tensIoner
FEATURES:• Reversible wear surfaces doubles product life• Shock-absorbing high-strength nylon webbing• Easy tensioning strap/buckle (no tools required)• Low friction• No maintenance or lubrication • Custom colors & private labeling available
SIZES:• All roller chains (including multiple strand drives)• Many other chain sizes available• Standard strap length allows 10” c-c spread
(longer strap lengths available)
APPLICATIONS:• Drive chains• Conveyor chains• Retrofit• Original Equipment
Manufacturers
MATERIALS:• UH-PE Black Industrial (UV)• UH-PE Natural for FDA• Nylon for High Temperature
Double Wear Surfaces
InfiniteAdjustment
Low Friction(Rides On Chain Roller)
Pat. 5,000,724
80 DiversifieD Plastics, inc.
polyurethane products
81
dIversalIner
Tough Polyurethane Liner Plate For the Mining, Lumber, & Paper, Sand & Gravel and Grain Handling Industries.
FEATURES: APPLICATIONS: • Outstanding Abrasion Resistance • Hopper Lining • Light Weight • Chute Lining • Flexible for easy Installation • Impact Pads • Superior Cut & Tear Strength • Noise Dampening • Fastening Systems Available • Available Bonded Steel Backing Plate
SIZES: MATERIALS: • 1/4", 3/8", 1/2", 3/4", 1" Thick • Available Enhanced with Ceramic • 4' x 8' Sheets • Custom Shore Hardnesses Available • Custom Sizes Available
82 DiversifieD Plastics, inc.
ea-55 polyurethane
FEATURES: APPLICATIONS:• Reduces Rebound • Lumber, Plywood• Aids Product Replacement • Material Handling Cushions• Cuts Noise Levels • Shock Absorbing Bearing Pads• Prevents Vibration Transmitted • “Bang” Boards• Protects Finished Product• Fastening Systems Available• Bonds To Steel Backing Plate• Bearing Material Can Be Bonded To Face• Available with protective face plates (several materials available)
SIZES: MATERIALS:• 1/2", 3/4", 1", 11/2" Thick • Specially Formulated 55A • Any Size Plate From 1" x 1" to 4' x 10’ Polyurethane
Illustrates Bonded to Steel Backing Plate
Illustrates Bonded to Steel Backing Plate With “AR” Plate Cover
83
spreader Wheels sand, salt & fertIlIzer
Proven under demanding, often sub-zero conditions, our polyurethane spinners are shock-absorbing, abrasion and corrosion resistant, and because of their flexibility, don’t allow sand to freeze to them ensuring maximum spreading effectiveness. Beefy “dual-directional” fins allow wheel to be spun in either direction. all wheels come with a reinforced universal bolt pattern.
If the sizes listed below do no meet your needs, ask us about our custom sizes.
Part # O.D. I.D. Height
SSW-20 20 1 1/2" 2 1/8 "SSW-18 18 1 1/2" 2 1/8 "
Also check Diversified Plastics for your Polyurethane Snow Plow Shear & Bumper Plates
For City, County and State road maintenance vehicles
84 DiversifieD Plastics, inc.
urethane rolls
FEATURES: APPLICATIONS:• New Rolls • Sander Bed Rolls • Recoat Old Rolls • Hold Down Rolls• High Quality Uniroyal Urethane • Crowned Rolls• High Visible Colors • Traction Rolls• Close Tolerance Machining Available • Planer Feed Rolls
SIZES: MATERIALS:• 1" Dia Thru 14" Dia • 40A – 70D Urethane• 1' Long Thru 10' Long • Additives Available
85
urethane Wheel recover
FEATURES: APPLICATIONS: • New Wheels • Hold Down Wheels • Recoat Used Wheels • Feed Wheels • High Quality Uniroyal • Drive Wheels Urethane • High Visible Colors • Close Tolerance Matching Available • Non-marking• No Pitch Build Up
SIZES: MATERIALS: • All Sizes Accepted • 40A - 70A Urethane • Additives Available
86 DiversifieD Plastics, inc.
urethane croWn pulley
FEATURES: APPLICATIONS: • Cost Effective Recoating • Tray Belt Drive & Idler Pulleys • High Grip • Veneer Transfer • Reduced Material Buildup • Panel Transfer • Various Durometers
SIZES: MATERIALS: • Solid & Split • Urethane • Custom Sizes Available
87
lumBer mIll
products for specIfIc IndustrIes
Auger Trough Liners.......................................................................................................................... 62Carriage Wheels ................................................................................................................................ 88Carry-Over Wheel ............................................................................................................................. 89Chain Guide .................................................................................................................................70-71Chain Tops ........................................................................................................................................ 78Diverter Arms .................................................................................................................................... 90Drag Chain Idler Drum ...................................................................................................................... 39Drag Chain Sprocket ........................................................................................................................ 38Drag Flights ....................................................................................................................................... 77EA-55 Polyurethane .......................................................................................................................... 82Even Ending Roll ............................................................................................................................... 91Industrial Auger Application .............................................................................................................. 61Industrial Augers ............................................................................................................................... 60J-Hooks ............................................................................................................................................ 92Kiln Cart Bushings ............................................................................................................................ 16Mill Chain Sprocket ........................................................................................................................... 37Pusher Lugs ...................................................................................................................................... 93Roll End Bearings ........................................................................................................................19-21Roller Lugs & Lug Pins ..................................................................................................................... 94Slider Blocks ..................................................................................................................................... 95Split Tipple Bearings ........................................................................................................................ 13Stainless Steel Hex Shaft Adapter ................................................................................................... 22Steel Cap Split Bearing ..................................................................................................................... 12 Sticker Placement Arms ................................................................................................................... 96Swede Roll ........................................................................................................................................ 97Tipple Arm ......................................................................................................................................... 98UHMW Oregon Bend ....................................................................................................................... 76Urethane Rolls ................................................................................................................................... 84Urethane Wheel Recover.................................................................................................................. 85Veneer and Lumber Cart Wheels ..................................................................................................... 99Wheels and Rollers ........................................................................................................................... 57
88 DiversifieD Plastics, inc.
carrIage Wheels
FEATURES: APPLICATIONS: • All but eliminates track wear • Log Carriages • Quieter & Smoother Operation • Saw Carriages • Longer Wear Life Than Cast Steel • Lighter Weight • Will Not Corrode — Non-Corrosive MATERIALS: • Excellent Resilience To Shock • High Impact Polyamide • Available in complete assembly or purchase • our wheels only (*see our new conversion plan) SIZES: *Save money, save freight, save your tracks!! • 8" to 24" O.D. • V & Flat Wheels *Send D.P.I. a used steel “V” Track and • a used flat track wheel. We will convert • your existing hubs to accept our high impact • polyamide wheels. Diversified will then provide • you or your machine shop a set of drawings • that will allow you to convert the balance of • your existing steel hubs to accept our replaceable • plastic wheels.
89
carry-over Wheel
Urethane coated Carry-Over Wheels are commonly used in the wood products industry for board carry-over applications between chain runs. They are manufactured from High Strength urethane materials which give them impact resistance as well as light weight construction and split design for easy installation. The soft urethane coating adds to their versatility in uses such as traction wheels, hold down wheels and feed rolls. Some popular sizes are listed here, all other standards and specials available.
COW 10 10" 3" COW 12 12" 3"COW 12.5 12 1/2" 3"COW 13 13" 3"COW 13.5 13 1/2" 3" COW 14 14 3"COW 14.5 14 1/2" 3"COW 15 15" 3"COW 16 16" 3"
O.D. FACE
Specify Bore and Keyway as needed.
Part #
90 DiversifieD Plastics, inc.
dIverter arms
Diverter Arms are molded from impact resistant, low friction UHMW and HMW polyethylene. They are orange in color and very economical. The light weight construction allows the arm to tip up and down quickly with low inertia. We ha ve a large selection of molded sizes available. If the following sizes below will not meet your needs, ask us about our extensive stock and our custom sizes.
DIV 1 A 1" 1'-6 1/2" 9" DIV 2 A 1" 1'-5 1/2" 8" DIV 3 B 1" 1'-8 1/2" 8" DIV 4 B 1" 1'-2 1/2" 8" DIV 5 A 1" 1'-3 1/2" 9" DIV 6 A 1" 1'-9 1/2" 9" DIV 7 A 1" 1'-10" 9 1/2" DIV 8 C 1" 1'-6 1/2" 6 7/8" (4 hole pattern) DIV 9 A 1" 1'-6 1/2" 9"DIV 10 B 1" 1'-8 1/2" 7 3/4"DIV 12 A 1" 1'-8" 9 1/4"DIV 22 C 1" 2'-0" 6 3/4" (2 hole pattern) DIV 26 D 1 1/8" 2'-0" 5 1/2"DIV 29 C 1" 1'-10" 7 1/2" (3 hole pattern)
Thickness YStyle X
Style (A)
Style (D)Style (C)
Style (B)
Part #
91
even endIng roll
FEATURES: APPLICATIONS:• Positive Positioning • Lug Loaders• Last Longer Than Rubber • Trimmers • Stays Cleaner Than Rubber • Sorters • Many Durometers Available • Stackers• Reconditionable
SIZES: MATERIALS:• All Sizes Available • Urethane Over Steel
92 DiversifieD Plastics, inc.
J-hooks
Style (F)
Proven under demanding conditions, from southern heat to sub-zero temperatures, throughout the wood products industry, our J-Hooks are non-marking, shock absorbing and impact resistant. They are light weight, which helps reduce system power consumption. J-Hooks are very economical and can be molded in our proprietary orange co-polymer as well as UHMW or urethane. Steel inserts are also popular. If the following sizes below will not meet your needs, ask us about our extensive stock and our custom sizes.
XHead
ThicknessStylePart YHoles C-C
BoltDia.
Extension KeyS-Steel Insert
Style (A) Style (B) Style (C) Style (D)
XXX
XY Y Y
Y
J1 A 9 1/2" 11 3/4" 1" 1 1/2" 1/4" J2 A 7 1/2" 12" 1" 1 1/2" 1/4" J3 B 8" 12 1/4" 1 1/4" 4" 3/8" J4 D 11 1/2" 11 1/2" 1" 3 1/2" 3/8" J5B C 7 1/2" 17 3/4" 1" 1 1/2" 1/4" J6 B 7 5/8" 12 1/4" 1 3/8" 4" 1/4" J7 C 8 5/8" 14" 1 1/32" 1 1/2" 1/4" J8 C 8 3/4" 15 1/2" 1 1/32" 1 1/2" 1/4" J9 D 12 1/4" 14 1/4" 1 1/32" 2" 1/4"J10B C 8" 10 3/4" 1 1/32" 1 1/2" 1/4"J11 C 9 3/4" 19 1/4" 1 1/32" 1 1/2" 1/4"J12 D 9 1/4" 12" 1 1/16" 1 1/2" & 3 5/8" 1/4" & 3/8"J13 C 9 1/4" 9 1/4" 1 1/32" 1 1/2" 1/4"J14 C 7 1/2" 9 1/4" 1 1/16" 1 1/2" 1/4"J15 C 11 1/8" 17 7/8" 1 1/32" 1 1/2" 1/4"J16 C 7 7/8" 12 3/8" 1 1/32" 1 1/2" 1/4"J16 (MOD) C 7 7/8" 12 3/8" 1 1/32" 2" 1/4"J17 E 7 1/4" 9 1/8" 1 1/16" 1 1/2" 1/4"J19 F 6 1/2 7 1/4" 1 1/32" 1" 1/4"J20 D 12 1/4" 12 1/2" 1 1/32" 3 5/8" 3/8"J20 M2 D 12 1/4" 10" 1 1/32" 3 5/8" 3/8"J21 E 7 1/2" 12" 1 1/16" 1 1/2" 1/4"J22 C 10 3/8" 10 1/2" 1 1/16" 1 1/2" 1/4"J23 B 7 1/2" 12 1/4" 1 1/8" 4" 3/8"J24 C 9 1/8" 17 3/4" 1 1/32" 1 1/2" 1/4"J25 B 8 1/8" 12 3/4" 1 1/32" 3" (3 holes) 3/8"J26 C 10" 18 1/2" 1 1/16" 1 1/2" 1/4"J27 D 11 1/4" 13" 1 1/16" 4" 1/4"
Style (E)
X
Y
X
Y
93
pusher lugs
Proven under demanding conditions, from southern heat to sub-zero temperatures, throughout the wood products industry, our Pusher Lugs are non-marking, shock absorbing and impact resistant. They are light weight, this helps to reduce system power consumption. Pusher Lugs are very economical and available in a variety of colors molded of 80A to 70D urethane, UHMW and Co-polymer. Steel inserts are also very popular. If the following sizes below will not meet your needs, ask us about our extensive stock and our custom sizes.
X HeadThickness
Style Y Holes C-C
BoltDia.
Style (A) Style (B) Style (C) Style (D)
LUG P A 10-1/2" 6" 1-1/16" 1-1/2" 1/4"LUG PM A 8-1/2" 6" 1-1/16" 1-1/2" 1/4"LUG P1 A 10-1/2" 6" 1-5/16" 1-1/2" 1/4"LUG P2 B 10-1/2" 4-3/4" 1-1/16" 3-5/8" 3/8"LUG P3 C 9-1/4" 4-3/4" 1-1/16" 3-5/8" 3/8"LUG P4 D 9-1/4" 5-1/2" 1-3/8" 4" 1/4"LUG P5 E 7-3/4" 3-1/2" 1-1/16" 1" 1/4"LUG P6 F 6-3/4" 4" 1-1/16" 1-1/2" 1/4"LUG P7 F 8-3/4" 4" 1-1/16" 1-1/2" 1/4"LUG P8 F 3-1/4" 2-1/4" 15/16" 3/4" 1/4"LUG P9 G 7" 5-1/2" 1-1/8" 1-1/2" 1/4"LUG P10 A 8-1/16" 6-3/16" 1-1/16" 1-1/2" 1/4"LUG P11 A 9-11/16" 6-1/4" 1-1/16" 1-1/2" 1/4"LUG P12 A 6-5/8" 6-3/16" 1-1/16" 1-1/2" 1/4"LUG P13 A 6-1/2" 6-1/4" 1" 1-1/2" 1/4"Optimizer Lug H 2-1/2" 2-7/8" 3/4" 5/16"
YYYY
X X X X
Style (E) Style (F) Style (G) Style (H)
X XX
YY
X
YY
Extension KeyS-Steel Insert
94 DiversifieD Plastics, inc.
roller lugs & lug pIns
Proven under demanding, often sub-zero conditions throughout the wood products industry, our Roller Lugs are non-marking, shock absorbing and impact resistant. They are low coefficient of friction. Roller Lugs are very economical and available in orange molded UHMW. Available with or without steel pins. If the following sizes below will not meet your needs, ask us about our extensive stock and our custom sizes.
LUG 1A 2 3/4" 1" 2 1/4" 2" 13/16" 2" 9/16" LUG 1B 2 3/4" 1" 2 1/4" 2" 15/16" 2" 7/16" LUG 4 3 1/2" 1 1/2" 2 1/4" 2 3/8" 1/2" N/A N/A LUG 5A 2 3/4" 1" 3 1/4" 2" 13/16" 2" 9/16" LUG 5B 2 3/4" 1" 3 1/4" 2" 15/16" 2" 7/16" LUG 6 2 3/4" 1 1/2" 1 3/4" 2 5/16" 3/16" N/A N/A LUG 7 3 7/8" 1 1/2" 2 1/4" 2 7/16" 9/16" N/A N/A LUG 8 2 3/4" 1" 2 1/4" 2" 13/16" N/A N/A LUG 9 2 3/4" 1" 1 3/4" 2 3/8" 1/2" 2 3/8" 1/2" LUG 10 2 1/2" 7/8" 2 3/4" 1 13/16" 1" N/A N/A
Part # O.D. I.D. Height Dia. Depth Dia. DepthTop Counterbore Bottom Counterbore
A
S-RPIN 1A 1 15/16"S-RPIN 1B 1 15/16"S-RPIN 4 1 15/16"S-RPIN 5A 1 15/16"S-RPIN 5B 1 15/16"S-RPIN 6 1 15/16"S-RPIN 7 1 15/16"S-RPIN 8 1 15/16"S-RPIN 9 1 15/16"S-RPIN 10 1 15/16"
Part # A
Roller Lugs
Lug Pins
95
slIder BlocksProven under demanding, conditions throughout the wood products industry. Slider Blocks are low coefficient of friction, shock absorbing and impact resistant. They are very economical and available in black molded UHMW. If the following sizes below will not meet your needs, ask us about our extensive stock and our custom sizes.
SLB1 A 4 1/2" 1 1/2" 1" 1 1/2" 1/4"SLB2 B 6" 1 3/8" 1" 1 1/2" 1/4"SLB2M B 6" 1 3/8" 3/4" 1 1/2" 1/4"SLB3N C 8" 2" 3/4" 4" 3/8"SLB3W C 8" 2" 1" 4" 3/8"SLB4 A 4 1/2" 1 1/2" 13/16" 1 1/2" 1/4"SLB5 B 6" 1 1/2" 1 1/4" 2" 5/16"SLB6 B 5 3/8" 1 3/8" 1" 3 5/8" 3/8"SLB8 B 5 3/8" 1 3/8" 1 1/4" 3 5/8" 3/8"SLB9 B 4 3/4” 1 1/4” 1” 1 1/2” 1/4”SLB10 B 4 3/4" 1 3/8" 1 1/8" 1 1/2" 1/4"SLB11 B 6" 1 3/8" 1 1/4" 1 1/2" 1/4"SLB15 B 6" 1 3/8" 11/16" 1 1/2" 1/4"SLB16 B 6" 1 3/8" 1” 4” 1/4"
Length ThicknessStyle Width BoltC-C
BoltDia.
Style (A) Style (B) Style (C)
Part #
96 DiversifieD Plastics, inc.
stIcker placement arms
FEATURES: APPLICATIONS:• Durable • Exact fit OEM replacement parts • Excellent Cold and Hot weather performance
SIZES: MATERIALS:• Standard Right hand • Proprietary Co-Poly Formulation and Left hand available.
*Right Hand Shown Above
97
sWede roll
FEATURES: APPLICATIONS:• Positive Grip • Green Chain • Outlasts Rubber • Trash Conveyors • No Pitch Build Up • Slab Sorter • Choice of Durometer • Inexpensive to Recover
SIZES: MATERIALS:• All Sizes Available • Urethane Over Steel
98 DiversifieD Plastics, inc.
tIpple arm
Tipple Arm bodies are constructed of either UHMW or polyurethane, depending on customers prefer-ence. They are available with a solid style nose, or with replaceable nylon “live” nose roller. The light weight of UHMW allows the arm to cycle quicker with less inertia. If the following sizes below will not meet your needs, ask us about our extensive stock and our custom sizes.
Extension KeyN-with nose roller
TA 2350 23 1/2" 1 3/4" 7 1/2"TA 2550 25 1/2" 1 3/4" 7 1/2"TA 2850 28 1/2" 1 3/4" 7 1/2"TA 3150 31 1/2" 1 3/4" 7 1/2"
X YThickness
Y
X
Part #
99
veneer & lumBer cart Wheels
FEATURES: APPLICATIONS:• Solid UHMW Compression Molded • Green/Dry Veneer Carts • Unbreakable • Other Carts
• No Lubrication • Light Weight • Inexpensive
SIZES: PART #: MATERIALS:• 12 O.D. • MW12 • Black UHMW
• 1 1/4" Bore • 3" Face
100 DiversifieD Plastics, inc.
panel
products for specIfIc IndustrIes
osB & partIcle BoardAuger Trough Liner ........................................................................................................................... 62Chain Guide .................................................................................................................................70-71Chain Tops ........................................................................................................................................ 78Doffing Roll Spacers ....................................................................................................................... 106Drag Chain Idler Drum ..................................................................................................................... 39Drag Chain Sprocket ........................................................................................................................ 38EA-55 polyurethane .......................................................................................................................... 82Forming Line Perforated Plate ........................................................................................................ 101Industrial Auger Application .............................................................................................................. 61Industrial Augers ............................................................................................................................... 60Mill Chain Sprocket ........................................................................................................................... 37UHMW Oregon Bends ..................................................................................................................... 76Polyurethane Panel Turner Accessories EA-55 Energy-Absorbing .............................................. 102Hot Press Platten Guides ............................................................................................................... 103Press Charger Star Gears .............................................................................................................. 104Steel Cap Split Bearings .................................................................................................................. 12Suction Rings .................................................................................................................................. 105Urethane Crown Pulley .................................................................................................................... 86Urethane Rolls .................................................................................................................................. 84Urethane Wheel Recover................................................................................................................. 85Veneer and Lumber Cart Wheels ..................................................................................................... 99Wheels and Rollers .......................................................................................................................... 57
101
formIng lIne perforated plate
FEATURES: APPLICATIONS:• Abrasion Resistant • Used at the Forming Heads on • Extends the Life of the * on the Particle Board and MDF • Forming Belt Forming Line • Lower Friction • Reduces use of Amps
SIZES: MATERIALS:• Built to Customers Specifications • Ceramic Filled UHMW • Phenolic • Nylon
102 DiversifieD Plastics, inc.
polyurethane panel turner accessorIes ea-55 energy-aBsorBIng
FEATURES: APPLICATIONS:• Gentle on Panel • Plywood / Fiberboard / • Prevents Shock From Being OSB Plants Transmitted to the Machine • Star Turner – Rollers, Arm Structure Cushions • Cuts Noise Levels Significantly • Drop Arm Turner Arm Cushions
PRODUCTS:• Available for Many Name Brand Turners• Can be Made for Your Custom In House Turner
103
hot press platten guIdes
LOCATION:• Fiberboard• Plywood Plants that use multi-opening Hot Press
FEATURES:• Traditional brass guides require
lubrication. This lubrication serves as a magnet for surrounding wood fiber, dust, and grit. Our HT-33 guides are self lubricating, providing cleaner smoother operation.
APPLICATIONS:• Press Platten Guides
(traditionally made of brass) are saddle bearings attached to the four corners of each hot press platten, or plate. These saddles glide on the four corner posts of the hot press to maintain the plattens position in the press.
104 DiversifieD Plastics, inc.
press charger star gears
FEATURES: APPLICATIONS:• Impact Resistant • Used on multi-opening Hot • High Wear Press Charger/Loader • Cost Effective • Quiet • Corrosion Resistant
SIZES: MATERIALS:• 15-tooth • Urethane • UHMW • Nylon
105
suctIon rIngs
FEATURES: APPLICATIONS: • Non-Marking • Suction Feeders • Durometers Ranging From • Saws 50A – 90A • Sanders • High Tear Strength • Coatings and Wear Characteristics
SIZES: MATERIALS: • 11.5" O.D. • Urethane • 13.0" O.D. • TPE Elastomers • Custom Sizes Available
106 DiversifieD Plastics, inc.
doffIng roll spacers
FEATURES: APPLICATIONS: • Quiet Operation • Used at the Fiber Bins • Spark Resistant Before Forming • Ease of Assembly • Light Weight • Cost Effective
SIZES: MATERIALS: • Custom Sizes Available • Urethane
107
plyWood
products for specIfIc IndustrIes
Auger Trough Liners......................................................................................................................... 62Chain Guide ................................................................................................................................ 70-71Chain Tops ....................................................................................................................................... 78Drag Chain Idler Drum ..................................................................................................................... 39Drag Chain Sprockets ..................................................................................................................... 38Dryer Hanger Bearing ...................................................................................................................... 17Dryer Hold Down Wheel ................................................................................................................. 108EA-55 Polyurethane ......................................................................................................................... 82Hot Press Platten Guides ............................................................................................................... 109Industrial Auger Application ............................................................................................................. 61Industrial Augers .............................................................................................................................. 60Mill Chain Sprockets ........................................................................................................................ 37Raymond Plugger Gears ................................................................................................................ 110Rotary Clipper Shear ...................................................................................................................... 111Skinner Deck Hold Down Wheel ................................................................................................... 112Skoog Plugger Sweeps .................................................................................................................. 113Steel Cap Split Bearings .................................................................................................................. 12Suction Rings .................................................................................................................................. 114UHMW Oregon bends .................................................................................................................... 76Urethane Crown Pulley .................................................................................................................... 86Urethane Roll.................................................................................................................................... 84Urethane Wheel Recover................................................................................................................. 85Veneer and Lumber Cart Wheels ................................................................................................... 115Veneer Knockdown Arm ................................................................................................................ 116Knock Down Arm Cylinder External Cushion ................................................................................ 117
108 DiversifieD Plastics, inc.
dryer hold doWn Wheel
FEATURES: APPLICATIONS:• Impact Resistant • COE Dryer/Infeed • Light Weight • Other Hold Down Applications• No Lubrication • Low Cost
SIZES: PART #: MATERIALS:• 8 1/2" O.D. • HDW 8.5 • 50 A Urethane O.D.• 2 5/8" Face • 70 D Urethane Body• 2 15/16" L.T.B. * Nylon Bushing or Sealed Bearings• Variable Bores
109
hot press platten guIdes
LOCATION:• Fiberboard• Plywood Plants that use
multi-opening Hot Press
FEATURES:• Traditional brass guides require
lubrication. This lubrication serves as a magnet for surrounding wood fiber, dust, and grit. Our HT-33 guides are self lubricating, providing cleaner smoother operation.
APPLICATIONS:• Press Platten Guides
(traditionally made of brass) are saddle bearings attached to the four corners of each hot press platten, or plate. These saddles glide on the four corner posts of the hot press to maintain the plattens position in the press.
110 DiversifieD Plastics, inc.
raymond plugger gears
FEATURES: APPLICATIONS:• Absorbs Shock for Other • Veneer Plugger Drive Components • Light Weight • Cost Effective • Quieter Running • Easy to Change • Less Lubrication
SIZES: MATERIALS:• RP 31TG (31 Teeth) • High Impact Nylon • RP 26TG (26 Teeth)
111
rotary clIpper shear
FEATURES: APPLICATIONS:• Light Weight • Plywood / Veneer Rotary Clipper• Less Expensive • Prevents Veneer Wrap Around Anvil
SIZES: MATERIALS:• All Custom Sizes Available • UHMW
112 DiversifieD Plastics, inc.
skInner deck hold doWn Wheel
FEATURES: APPLICATIONS:• No Build Up • Plywood and Panel Plants• Longer Lasting • Hold Down Drive Wheels for• Soft Durometer Outer Tire Skinner Saw Feed Deck• Cost Effectively Re-Coat Worn Wheels • Available With or Without Set Collar
SIZES: MATERIALS:• Custom Sizes and Shaft Fits Available • Dual Durometer Urethane
113
skoog plugger sWeeps
FEATURES: APPLICATIONS: • Light Weight • Skoog Veneer Plugger • Low Cost • Can be run through Die Set • without causing damage to machine.
SIZES: MATERIALS: • Custom Sizes Available • Urethane
114 DiversifieD Plastics, inc.
suctIon rIngs
FEATURES: APPLICATIONS:• Non-Marking • Suction Feeders• Durometers Ranging From • Saws 50A – 90A • Sanders
• High Tear Strength • Coatings and Wear Characteristics
SIZES: MATERIALS:• 11.5" O.D. • Urethane• 13.0" O.D. • TPE Elastomers• Custom Sizes Available
115
veneer & lumBer cart Wheels
FEATURES: APPLICATIONS:• Solid UHMW Compression Molded • Green/Dry Veneer Carts • Unbreakable • Other Carts• No Lubrication • Light Weight• Inexpensive
SIZES: PART #: MATERIALS:• 12 O.D. • MW12 • Black UHMW• 1 1/4" Bore • 3" Face
116 DiversifieD Plastics, inc.
veneer knockdoWn arm
FEATURES: APPLICATIONS:• Unbreakable “No Whip” Plastic Body • Green Stackers• Replaceable Urethane Traction Surface • Dry Stackers• Replaceable Bushings • Raute Machines• Cost Effective Exchange Program• We Also Supply New & Refinished Plywood Arms
SIZES: PART #: MATERIALS:• 54” • KDARM 54 • UHMW/Urethane• 27” • KDARM 27 • Plywood/Urethane• Other Sizes Available
117
knock doWn arm cylInder external cushIon
FEATURES: APPLICATIONS:• Eliminates Shock • Green & Dry Veneer Stackers• Saves Cylinder Components • Saves Knockdown Arms • Less Down Time
SIZES: MATERIALS:• Fits standard 3/4” rod • Urethane • EA-55 (Energy Absorbing Urethane)
118 DiversifieD Plastics, inc.
pulp & paper
products for specIfIc IndustrIes
Auger Trough Liners.......................................................................................................................... 62Chain Guide .................................................................................................................................70-71Chain Tops ........................................................................................................................................ 78Drag Chain Idler Drum ...................................................................................................................... 39Drag Chain Sprocket ........................................................................................................................ 38Drag Flights ....................................................................................................................................... 77EA-55 Polyurethane .......................................................................................................................... 82Impact Conveyor Idler Retro-Fits...................................................................................................... 67Industrial Auger Application .............................................................................................................. 61Industrial Augers ............................................................................................................................... 60Mill Chain Sprocket ........................................................................................................................... 37Paper Roll Crane Hook Liners ........................................................................................................ 119Rattle Rolls ........................................................................................................................................ 66Reel Spool Roll Cushions ............................................................................................................... 120Roll Handling Stops and Bumpers................................................................................................. 121Scalping Roll Spacers ..................................................................................................................... 122Steel Cap Split Bearings ................................................................................................................... 12Suction Box Cover.......................................................................................................................... 123Tidland Core Shaft Cradle .............................................................................................................. 124UHMW Oregon Bends ..................................................................................................................... 76Urethane Rolls ................................................................................................................................... 84Urethane Wheel Recover.................................................................................................................. 85Venturi Dampers ............................................................................................................................. 125
119
paper roll crane hook lIners
FEATURES: APPLICATIONS:• Excellent Hook Protector • Paper Roll Crane Hooks• Protects Paper Roll Bearing Journals
SIZES: MATERIALS:• Custom Sizes Available • Nylon
120 DiversifieD Plastics, inc.
reel spool & roll cushIons
FEATURES: APPLICATIONS: • Eliminates Structural Damage • Gently Cushions and Stops • Eliminates Reel Spool Damage The Reel Spools at the • Sound Dampening Winders and Rewinders
SIZES: MATERIALS: • Custom Sizes Available • Energy Absorbing Urethane
121
roll handlIng stops & Bumpers
FEATURES: APPLICATIONS: • Softens Blow To Mechanical Linkages • Gently Stops Rolls in Areas • Eliminates Paper Damage Such as Weight Stations, (Denting, Scrubbing, Tearing, etc.) Elevators, Bander, etc. • Quieter
SIZES: MATERIALS: • Custom Sizes Available • Energy Absorbing Urethane
122 DiversifieD Plastics, inc.
scalpIng roll spacers
FEATURES: APPLICATIONS:• Excellent Wear That • Used Between the “Stars” Outlasts Steel on the Scalping Conveyer and Live• Resilient for Difficult Product Grizzly Systems That Needs to Pass Through • Easy to Install and Replace
SIZES: MATERIALS:• Custom Sizing Available • Urethane
123
suctIon Box cover
FEATURES: APPLICATIONS:• Gentle on Felt/Wire • Used at Wet End of and Minimizes Wear Paper Machines • Simple Installation • Long Lasting • High Chemical Resistance
SIZES: MATERIALS:• Custom Sizes and • Ceramic Filled UHMW Designs Available • Natural UHMW • Black UHMW
124 DiversifieD Plastics, inc.
tIdland core shaft cradle
FEATURES: APPLICATIONS: • Eliminates Damage to Expensive Shaft • Gently Cradles the Expandable Core • Quiet Shafts at the Rewind Station • Lasts Longer Than Wood
SIZES: MATERIALS: • Custom Sizes Available • Urethane
125
venturI dampers
FEATURES: APPLICATIONS:• Long Lasting • Velocity Control in the• Abrasion Resistant Air Scrubber • Corrosion Resistant • Durable
SIZES: MATERIALS:• Custom Sizes Available • UHMW-PE • Stainless Steel
126 DiversifieD Plastics, inc.
food
products for specIfIc IndustrIes
AG Chain Sprockets ......................................................................................................................... 33Auger Trough Liners.......................................................................................................................... 62B7 Series Plastic Modular Belting .................................................................................................... 44B8 Series Plastic Modular Belting .................................................................................................... 45B9 Series Plastic Modular Belting .................................................................................................... 46B13 Series Plastic Modular Belting .................................................................................................. 47B14 Series Plastic Modular Belting .................................................................................................. 48B15 Series Plastic Modular Belting .................................................................................................. 49B16 Series Plastic Modular Belting .................................................................................................. 50Can Line Pulleys ............................................................................................................................... 55Chain Guide .................................................................................................................................70-71Diversaliner ........................................................................................................................................ 81Diversa-Track - Curved & Straight Track For Table Top Chain ........................................................ 75Drag Flights ....................................................................................................................................... 77Flange Bearings - 2 bolt & 4 bolt ........................................................................................................7Flat Top Conveyor Sprockets ......................................................................................................34-35Flat Top Idler Wheels ......................................................................................................................... 36Industrial Auger Application .............................................................................................................. 61Industrial Augers ............................................................................................................................... 60Metering and Spice Augers .............................................................................................................. 63Mill Chain Sprocket ........................................................................................................................... 37Molded Rollers .................................................................................................................................. 58Pillow Block Bearings ..........................................................................................................................5Rattle Roll .......................................................................................................................................... 66Roll End Bearings ........................................................................................................................19-21Roller Chain Sprockets ................................................................................................................26-30Self Aligning Bearing Inserts ................................................................................................................8Self Aligning Bearing Housings 2 bolt & 4 bolt ................................................................................ 10Self Aligning Bearing Housings Pillow Block Style........................................................................... 9Split Pillow and Split Block Bearings ................................................................................................ 11Spur Gears ........................................................................................................................................ 41Stainless Steel Hex Shaft Adapter ................................................................................................... 22Suction Rings .................................................................................................................................. 105UHMW Oregon Bend ...................................................................................................................... 76Urethane Crown Pulley .................................................................................................................... 86Urethane Rolls .................................................................................................................................. 84Urethane Wheel Recover................................................................................................................. 85Wheels and Rollers .......................................................................................................................... 57
127
mInIng
products for specIfIc IndustrIes
Auger Trough Liners.......................................................................................................................... 62Diversaliner ........................................................................................................................................ 81Drag Flights ....................................................................................................................................... 77EA-55 Polyurethane .......................................................................................................................... 82Impact Conveyor Retro-Fits ............................................................................................................. 67Industrial Augers ............................................................................................................................... 60Mill Chain Sprocket ........................................................................................................................... 37Molded Rollers .................................................................................................................................. 58Rattle Rolls ........................................................................................................................................ 66Roller Chain Sprockets ................................................................................................................26-30Spur Gears ........................................................................................................................................ 41Steel Cap Split Bearings ................................................................................................................... 12Urethane Crown Pulley ..................................................................................................................... 86Urethane Rolls ................................................................................................................................... 84Urethane Wheel Recover.................................................................................................................. 85Wheels and Rollers ........................................................................................................................... 57
128 DiversifieD Plastics, inc.
agrIculture
products for specIfIc IndustrIes
AG Chain Sprockets ......................................................................................................................... 33Auger Trough Liners.......................................................................................................................... 62Chain Guide .................................................................................................................................70-71Diversaliner ....................................................................................................................................... 81Drag Flights ...................................................................................................................................... 77Flange Bearings - 2 bolt & 4 bolt ...................................................................................................... 7Flat Top Conveyor Sprockets ..................................................................................................... 34-35Flat Top Idler Wheels ........................................................................................................................ 36Industrial Augers .............................................................................................................................. 60Mill Chain Sprocket .......................................................................................................................... 37Molded Rollers ................................................................................................................................. 58Pillow Block Bearings ........................................................................................................................ 5Rattle Roll ......................................................................................................................................... 66Roll End Bearings ........................................................................................................................19-21Roller Chain Sprockets ................................................................................................................26-30Self Aligning Bearing Housings 2 bolt & 4 bolt ................................................................................ 10Self Aligning Bearing Housings Pillow Block Style ............................................................................ 9Self Aligning Bearing Insert ................................................................................................................ 8Split Pillow and Split Block Bearing ................................................................................................. 11Spur Gears ....................................................................................................................................... 41Stainless Steel Hex Shaft Adapter .................................................................................................. 22Steel Cap Split Bearings .................................................................................................................. 12UHMW Oregon Bend ...................................................................................................................... 76Urethane Crown Pulley .................................................................................................................... 86Urethane Rolls .................................................................................................................................. 84Urethane Wheel Recover................................................................................................................. 85Wheels and Rollers .......................................................................................................................... 57
129
Waste Water treatment
products for specIfIc IndustrIes
1900 Ultrahigh Molecular Weight Polymer .................................................................................... 159Auger Trough Liners........................................................................................................................ 154Bar Screen Conversion .................................................................................................................. 130Carry and Return Wear Shoes ....................................................................................................... 144Chain ............................................................................................................................................... 150Custom Non-Metallic Drive Sprockets ........................................................................................... 137Custom 720 Sprockets .................................................................................................................. 134“FRP” Sludge Collection Flights ..................................................................................................... 142Flight Filler Blocks ............................................................................................................................ 145Grit Collector ................................................................................................................................... 158Grit Collector Conversion ................................................................................................................ 131Hanger Bearings ............................................................................................................................. 155Industrial Auger Application ............................................................................................................ 153Industrial Augers ............................................................................................................................. 152Non-Metallic Bar Screen Rakes ..................................................................................................... 151Non-Metallic 78 Series ................................................................................................................... 138Property Comparison Chart ........................................................................................................... 160Rattle Roll ........................................................................................................................................ 157Rectangular Sludge Collector ......................................................................................................... 132Replacement Flight Data ................................................................................................................ 143Replacement Sprocket Segments ................................................................................................. 13578 Series Shear Pin Sprocket ........................................................................................................ 13978 Series Split Non-Metallic Dished Drive Sprockets .................................................................... 136Split Set Collar & Split Static Shaft Sleeve Bushing ....................................................................... 141Steel Cap Split Bearings ................................................................................................................. 156Take Up Arm .................................................................................................................................. 149Wall Brackets .................................................................................................................................. 148Wearstrip & Fasteners .................................................................................................................... 146
130 DiversifieD Plastics, inc.
Bar screen conversIon
SPROCKETSSPROCKETSPAGE 4-10PAGE 4-10
UHMW SCRAPERUHMW SCRAPER(FOUND ON BACKSIDE)(FOUND ON BACKSIDE)
CALL FOR QUOTECALL FOR QUOTE
CHAINCHAINPAGE 19PAGE 19
BAR SCREENBAR SCREENRAKESRAKES
PAGE 20PAGE 20
SPROCKETSPAGE 133-140
UHMW SCRAPER(FOUND ON BACKSIDE)
CALL FOR QUOTE
CHAIN PAGE 150
BAR SCREEN RAKES
PAGE 151
131
grIt collector conversIon
SPROCKETS SPROCKETS PAGES 4-1PAGES 4-111
CHAINCHAINPAGE PAGE 22222222
GRIT COLLECTORGRIT COLLECTORBUCKETBUCKETPAGE PAGE 3030
RETURN RETURN RAIL WEARSTRIPRAIL WEARSTRIP
PAGE 1PAGE 188
DRAG FLIGHTSDRAG FLIGHTSCALL FOR QUOTECALL FOR QUOTE
CARRY RAIL CARRY RAIL WEARSTRIPWEARSTRIP
PAGE 1PAGE 188
SPROCKETS SPROCKETS PAGES 4-1PAGES 4-1PAGES 4-1PAGES 4-111
SPROCKETS PAGES 133-140
CHAINPAGE 150
GRIT COLLECTOR
BUCKETPAGE 158
RETURN RAIL WEARSTRIP
PAGE 146
DRAG FLIGHTSCALL FOR QUOTE
CARRY RAIL WEARSTRIP
PAGE 146
SPROCKETS PAGES 133-140
132 DiversifieD Plastics, inc.
rectangular sludge collector
3
RectangularSludge Collector
SHEAR PINASSEMBLY
PAGE 10
DRIVESPROCKETS
PAGE 7
WEAR STRIPPAGE 16
COLLECTOR CHAIN
NON-METALLICRETURN RAILCOMPONENTS
PAGE 17
SPROCKETSPAGE 4
FLIGHTCOMPONENTS
PAGES 12,14 & 15
DRIVE CHAINPAGE 19 SHEAR
PIN ASSEMBLYPAGE 139-140
DRIVE SPROCKETS
PAGE 136
WEAR STRIP
PAGE 146COLLECTOR
CHAIN
NON-METALLIC
RETURN RAIL COMPONENTS
PAGE 142
SPROCKETSPAGES 133-139
FLIGHT COMPONENTS
PAGES 142
DRIVE CHAIN
PAGE 150
133
molded 700 serIes sprocketsDiversified Plastics Molded 700 Series Split Sprockets are available in either chainsaver or non-chainsaver styles. Sprockets can be ordered with straight bore, bore with keyway and set screw, or bored to run on static sleeve bushing. Our 700 series molded sprockets are available in UHMW-PE, Nylon, Polyurethane, and Glass-Filled Co-Polymer. Our unique ability to combine more than one material in a single sprocket allows us to utilize the desirable characteristics of each of the engineered plastics to maximize service life. All of our sprockets are corrosion resistant, abrasion resistant and as little as 1/6th the weight of their metal counterparts.*
720 SPLIT CHAINSAVER SPROCKETS, CHAIN PITCH: 6.000”, STD MAT’L: BLK REPRO UHMW/COPOLYMER
CATALOG # # TEETH PITCH DIA.
LTB HUB DIA STANDARD CHAINSAVER
RIM OD
SPRKT OD MIN BORE MAX KEYED BORE
MAX IDLER BORE
DPWT72017T-M 17 16.59 4/6 10 14.07 17.44 1.938 5.75 5.75
DPWT72019T-M 19 18.45 4/6 10 16.06 19.30 1.938 5.75 5.75
DPWT72023T-M 23 22.21 4/6 10 20.00 23.03 1.938 5.75 5.75
DPWT72025T-M 25 24.10 4/6 10 22.03 24.92 1.938 5.75 5.75
700 / 715 / 713 SPLIT CHAINSAVER SPROCKETS, CHAIN PITCH: 6.000”, STD MAT’L: BLK REPRO UHMW/COPOLYMERCATALOG # # TEETH PITCH
DIA.LTB HUB DIA STANDARD
CHAINSAVERRIM OD
SPRKT OD MIN BORE MAX KEYED BORE
MAX IDLER BORE
DPWT70017T-M 17 16.59 4/6 10 13.950 17.618 1.938 5.75 5.75
DPWT70019T-M 19 18.45 4/6 10 15.972 19.500 1.938 5.75 5.75
DPWT70023T-M 23 22.21 4/6 10 19.980 23.240 1.938 5.75 5.75
DPWT70025T-M 25 24.10 4/6 10 22.018 25.110 1.938 5.75 5.75
NOTE, 4” LTB FOR IDLER AND SET SCREW BORE, 6” LTB FOR KEYED BORES. AVAILABLE UPON REQUEST - CUSTOM CHAINSAVER RIM OD DIMENSION TO MATCHSPECIFIC NON-METALLIC CHAIN SIDEBAR HEIGHTS. CUSTOMER IS TO PROVIDE CUSTOM CHAINSAVER RIM DIMENSION AT TIME OF INQUIRY. CUSTOM SPROCKET RIM AND INNER HUB MATERIAL OPTIONS - NYLON 6/6, URETHANE, OR COMBINATIONS THERE OF.
134 DiversifieD Plastics, inc.
custom 720 sprocketsDiversified Plastics can manufacture 720 Series Sprockets to meet your custom needs. Special length through bore, hub diameter or material requests can be accommodated. By providing the information detailed below we can assure proper fit, form and function of your custom need.
REPLACEMENT SPROCKET DATACURRENT TYPE OF CHAIN ________________
PROPOSED TYPE OF CHAIN _______________
CHAIN PITCH ____________________________
NUMBER OF TEETH ______________________
PITCH DIA _______________________________
CHAINSAVER RIM YES OR NO
(IF YES)
CHAINSAVER RIM OD _____________________
SHAFT SIZE _____________________________
BORE STYLE:
(2) SET SCREWS _____________________
IDLER BORE ________________________
KEYWAY & (2) SET SCREWS ___________
SIZE OF KEYWAY
(IF NON-STANDARD) ________________
LENGTH THRU BORE _____________________
HUB STYLE _____________________________
DOES SPROCKET REQUIRE A STATIC SLEEVE
BUSHING? ______________________________
MATERIALS AVAILABLEUHMW P.E.*NylonDelrinPolyurethane
NotesHub Bolts- (8) 1/2 - 13 x 3”
SprocketOD
HubOD
1,000 Split View
Split View
1 1/4” Dia x 1/2” DeepCountersunk(8) Places
1 1/4” x 1/2” DeepCountersunk
(8) Places
Bore
LTB
NotesHub Bolts- (8) 1/2 - 13 x 3”
SprocketOD
HubOD
1,000
Bore
ChainsaverRim OD
Hub Profiles
APlate
CHub
BHub
DHub Or
C Offset
DishedOffset
LTB
STANDARD KEYWAYS AND SETSCREWS DIAMETER KEYWAY DIAMETER OF SKILL WIDTH DEPTH OF SETSCREW 1/2 — 9/16 1/8 1/16 1/4 5/8 — 7/8 3/16 3/32 1/4 15/16 — 7/8 1/4 1/8 5/16 1-5/16 — 1-3/8 3/16 3/32 5/16 1-7/16 — 1-3/4 3/8 3/16 3/8 1-13/16 — 2-1/4 1/2 1/4 1/2 2-5/16 — 2-3/4 5/8 5/16 5/8 2-13/16 — 3-1/4 3/4 3/8 3/4 3-5/16 — 3-3/4 7/8 7/16 3/4 3-13/16 — 4-1/2 1 1/2 3/4 4-9/16 — 5-1/2 1-1/4 3/8 3/4 5-9/16 — 6-1/2 1-1/2 3/4 1 6-9/16 — 7-1/2 1-3/4 1/8 1 7-9/16 — 8-15/16 2 3/4 1 9 — 10-15/16 2-1/2 7/8 1
135
replacement sprocket segments
(720 Series, 78 Series and more.) Diversified Plastics can manufacture replacement tooth segments to fit your existing hubs. Our replacement segment can interface with cast iron, as well as plastic hubs that provide for “replaceable teeth”. By providing the information detailed below we can assure proper fit, form and function of your replacement segments.
MATERIALS AVAILABLEUHMW-PE*NylonDelrinPolyurethane
REPLACEMENT SPROCKET SEGMENT DATA
CURRENT TYPE OF CHAIN ________________
PROPOSED TYPE OF CHAIN _______________
CHAIN PITCH ____________________________
NUMBER OF TEETH ______________________
PITCH DIA_______________________________
CHAINSAVER RIM YES OR NO
(IF YES)
CHAINSAVER RIM OD _____________________
INTERIOR DIMENSION (ID)_________________
IF SEGMENT REQUIRES BOLT HOLES
NUMBER OF HOLES ______________________
SIZE OF HOLES __________________________
BOLT CIRCLE ____________________________
THRU HOLE, COUNTER BORED HOLES
OR CHAMFERED HOLES __________________
DOES SPROCKET SEGMENT
HAVE A COUNTER BORED ID? _____________
136 DiversifieD Plastics, inc.
78 serIes splIt non-metallIc dIshed drIve sprockets
7
Diversified Plastic’s fully non-metallic dished drive sprocketsfeature our durable polyurethane dished hub. The replaceablebolt on segmental teeth are available in your choice of materi-als, (see chart below) to meet a wide range of demands.
* Other chain sizes available upon request
* All hardware provided is T-304 Stainless unless otherwise specified
Split Non-MetallicDished Drive Sprockets
(78 Series)
SEGMENTAL TOOTH MATERIALS AVAILABLEUHMW-PENylonPolyurethaneDelrin
Diversified Plastic’s fully non-metallic dished drive sprockets feature our durable polyurethane dished hub. The replaceable bolt on segmental teeth are available in your choice of materials, (see chart below) to meet a wide range of demands.
* Other chain sizes available upon request
SEGMENTAL TOOTHMATERIALS AVAILABLEUHMW-PENylonPolyurethaneDelrin
137
custom non-metallIc drIve sprockets
(Note: Not all hub profiles are available in all materials offered.)
SEGMENTAL TOOTH MATERIALS AVAILABLEUHMW-PENylonPolyurethaneDelrin
HUB MATERIALS AVAILABLEUHMW-PENylonPolyurethaneDelrinCast Iron
SPROCKET DATACURRENT TYPE OF CHAIN ________________
PROPOSED TYPE OF CHAIN _______________
CHAIN PITCH ____________________________
NUMBER OF TEETH ______________________
PITCH DIA_______________________________
CHAINSAVER RIM YES OR NO
(IF YES)
CHAINSAVER RIM OD _____________________
SHAFT SIZE _____________________________
SIZE OF KEYWAY & SET SCREWS
(IF NON-STANDARD) ______________________
LENGTH THRU BORE _____________________
HUB STYLE _____________________________
HUB PROFILES __________________________
OFFSETDIMENSION
HUB OD
SPLIT
PITCH DIA
BOREW/KW&(2)SET SCREWSSPROCKET OD
LTB
Diversified Plastics can manufacture drive sprockets to meet your specific needs. By providing the information detailed below, we can assure proper fit, form and function of your custom sprocket.
* All hardware provided is 304 Stainless unless otherwise specified.
D HUBOR
C OFFSET
B HUB
C HUB
DISHED OFFSET
138 DiversifieD Plastics, inc.
78 serIes non-metallIc 2.609” pItch
Diversified Plastics offers non-metallic 78 Series sprockets in a variety of configurations and materials. All of our non-metallic materials are corrosion resistant, and are designed to maximize your chains service life. Listed below are some of our standard sizes*. Call us for your custom requirements.
*Other chain sizes available upon request.
STYLES AVAILABLEA—A PlateB—B Style, hub on one sideC—C Style, hub on both sidesD—Drive SprocketS—SplitX—Special
MATERIALS AVAILABLEUHMW-PENylonDelrinPolyurethane
PRODUCT CATALOGUE# TEETH STYLESprocket DPWT 7807 7 A,B,C,D,S,X,#78/81X DPWT 7808 8 A,B,C,D,S,X, DPWT 7809 9 A,B,C,D,S,X, DPWT 7810 10 A,B,C,D,S,X, DPWT 7811 11 A,B,C,D,S,X, DPWT 7812 12 A,B,C,D,S,X, DPWT 7813 13 A,B,C,D,S,X, DPWT 7814 14 A,B,C,D,S,X, DPWT 7815 15 A,B,C,D,S,X,
A-PLATE SPLIT
DRIVE SPROCKET, bolt-on-drive
139
78 serIes shear pIn sprocket 2.609” pItch
78 SERIES STANDARD SHEAR PIN SPROCKETS CATALOGUE # #TEETH PITCH DIA MAX BORE LTB HUB ODDPWTSLSP-11T-SS 11 9.26” 2-1/2” 4” 7.5DPWTNM-11T-UR 11 9.26” 2-1/2” 3” 6.5
*Shear Pin supplied with sprocket assembly. Customer to provide torque value required or pin neck diameter at time of inquiry.
**Collar is for “heavy duty” application, otherwise a stainless steel snap ring is used with a nylon thrust washer.
“SLIM-LINE COMBO” DPWTSLSP-11T-SS“SLIM-LINE COMBO” DPWTSLSP-11T-SSCONSISTING OF STAINLESS STEEL BODYCONSISTING OF STAINLESS STEEL BODYAND “MDS FILLED” PLASTIC SPROCKET RIMAND “MDS FILLED” PLASTIC SPROCKET RIM
“NON-METALLIC” DPWTNM-11T-UR“NON-METALLIC” DPWTNM-11T-URCONSISTING OF URETHANE BODYCONSISTING OF URETHANE BODYCONSISTING OF URETHANE BODYCONSISTING OF URETHANE BODYAND “MDS FILLED” NYLON SPROCKET RIMAND “MDS FILLED” NYLON SPROCKET RIM
**5/8”THREADED5/8”THREADEDSHEAR PINSHEAR PIN
****STAINLESS STEELSTAINLESS STEELSTAINLESS STEELSTAINLESS STEELHUB AND NYLONHUB AND NYLONCOLLARCOLLAR
2.6252.625
LTBLTB
PITCHPITCHDIADIA
BOREBOREW/STD KW&2SSW/STD KW&2SS
SPROCKETSPROCKETODOD
PITCHDIA
BOREW/STD KW&2SS
SPROCKETOD
VISUAL TRIP-CAM PIN STAINLESS STEEL
SNAP RING
URETHANEBODY
SHEARPIN
3.063
140 DiversifieD Plastics, inc.
JaW clutch shear pIn drIve sprocket assemBly
NON-METALLIC SHEAR PIN SPROCKETS WILL PROTECT DOWN LINE EQUIPMENT WITHOUT THREAT OF SEIZURE DUE TO CORROSION.
SPECIAL TOOTH AND BORE CONFIGURATIONS ARE AVAILABLE UPON REQUEST.
A SHEAR PIN IS INCLUDED IN EACH UNIT.
WILL NOT RUST.
REPLACEABLE SPROCKET RIM
EASY INSTALLATION
JAW CLUTCH WITH HAND WHEEL ASSEMBLY
CATALOG # # OF TEETH PITCH DIA. MAX BORE "A" DIM "B" DIM "C" DIM "D" DIM
DPWTJC7811T 11 9.26 2.50 3.50 2.75 3.00 12.38
NYLON 6 AND 304SS HARDWARE ARE STANDARD MATERIALS AVAILABLE IN CLOCKWISE AND COUNTERCLOCKWISE ROTATION
D
A B C
141
splIt set collar & splIt statIc shaft sleeve BushIng
• Standard collars are made of black UHMW-PE or black nylon. Both materials provide UV Protection
• Standard bushings are made of Nyloil® or black UHMW-PE for self lubrication.
• If the sizes or materials listed don’t meet your specific needs contact us for your custom requirements.
• These non-metallic components are ideal for new installations or retrofits alike.
• All hardware provided in 304 Stainless Steel unless otherwise specified.
DPWTSS060 1" 6.00 1 3/4" up to 4"DPWTSS070M 1" nom 7.00 1 3/4" - 5"DPWTSS080 1" 8.00 3 1/4” up to 5”
WCatalogue #
ODBore (in.)
Dia.
Shaft Collars: Regular Duty
DPWTSS2600 2.5" 6.00 1 3/4" up to 4"DPWTSS2800 2.5" 8.00 3 1/4" up to 5"
WCatalogue #
ODBore (in.)
Dia.
Shaft Collars: Heavy Duty
Static Shaft Bushing - Split
DPWT0047 3-3/4 Idler 2-15/16 4 6 4-1/2DPWT0064 5 Idler 4 4 6 6DPWT0072 5-1/4 Idler 4-1/4 4 6 6-1/4DPWT0072M 5-1/4 Idler 4-1/4 4 6 6-1/2DPWT0084 6 Idler 5-1/4 4 6 7
RequiredSprocket
Catalogue # Max. ShaftSize (in.) A B D
Bore
Set Screw
Bore
* “M” DENOTES MOLDED SERIES
142 DiversifieD Plastics, inc.
“frp” sludge collectIon flIghts
For use with primary and secondary clarifiers, cross collectors and some DAF applications. Flights are custom fabricated to fit any application. Fiberglass reinforced isophthalic polyester resin (FRP).
3” x 6” and 3” x 8” nominal standard sizes.
Optional materials - Aluminum, Laminated Wood.
143
replacement flIght data
144 DiversifieD Plastics, inc.
carry & return Wear shoes
Diversified Plastics manufactures wear shoes from a Diversified Plastics manufactures wear shoes from a variety of materials to meet your needs. All of the shoes variety of materials to meet your needs. All of the shoes we offer are molded solid one-piece construction. Sizes we offer are molded solid one-piece construction. Sizes and hole patterns vary from system to system. By and hole patterns vary from system to system. By providing the information detailed below we can insure providing the information detailed below we can insure proper fit form and function for your particular need.proper fit form and function for your particular need.
14
Carry and Return Wear Shoes
Diversified Plastics manufactures wear shoes from a variety ofmaterials to meet your needs. All of the shoes we offer are moldedsolid one-piece construction. Sizes and hole patterns vary from sys-tem to system. By providing the information detailed below we caninsure proper fit form and function for your particular need.
Carry Wearshoe
Single Hole Return Wearshoe
Double Hole Return Wearshoe
A________________InchesB________________InchesC________________InchesD________________InchesE________________InchesF ________________Inches
A________________InchesB________________InchesC________________InchesD________________InchesE________________InchesF ________________Inches
A________________InchesB________________InchesC________________InchesD________________InchesE________________InchesF ________________Inches
145
flIght fIller Blocks 720 & 78 chaIn
FEATURES:• Light Weight
• Chemical Resistant
• Diversified Plastics offers filler blocks for both 720 and H-78 assemblies. Standard Filler Blocks are made of impact modified polypropyl-ene, but other materials such as Polyurethane, Nylon, and Polyethylene are available upon request.
• Our blocks are designed to fill the full depth of the flight board and provide a snug secure fit.
17
Flight Filler Blocks(720 and 78 Chain)
FEATURES:• Light Weight• Chemical Resistant• Diversified Plastics offers filler blocks for both 720 and H-78 assem-blies. Standard Filler Blocks are made of impact modified polypropylene, butother materials such as Polyurethane, Nylon, and Polyethylene areavailable upon request.• Our blocks are designed to fill the full depth of the flight board andprovide a snug secure fit.
15
146 DiversifieD Plastics, inc.
WearstrIp & fastenersDiversified Plastics Wearstrip is manufactured from black reprocessed UHMW-PE (Virgin UHMW available on request). Our black UHMW-PE provides UV protection as well as superior abrasion resistance. Its low coefficient of friction protects the rails as well as opposing parts. Our wearstrips are corrosion resistant and absorb no moisture. Listed below are some of our standard sizes, or call us with your custom requirements.
WATER TREATMENT STARTER WEARSTRIPFor use with 1-3/8” Weld Washers (see below)
Catalog Thickness Widths Length Center No. (in.) (in.) (in.) Line DPWT3752-S 3/8 2-5/8 120 1-5/16 DPWT3753-S 3/8 3 120 1-1/2 DPWT5025-S 1/2 2-1/2 120 1-1/4 DPWT5030-S 1/2 3 120 1-1/2 DPWT5035-S 1/2 3-1/2 120 1-3/4 DPWT5040-S 1/2 4 120 2 DPWT5050-S 1/2 5 120 2-1/2 DPWT6252-S 5/8 2-1/2 120 1-1/4 DPWT6253-S 5/8 3 120 2-1/2 DPWT6254-S 5/8 4 120 2 DPWT6255-S 5/8 5 120 2-1/2
WATER TREATMENT FILLER WEARSTRIPFor use with 1-3/8” Weld Washers (see below)
Catalog Thickness Widths Length Center No. (in.) (in.) (in.) Line DPWT3752-F 3/8 2-5/8 120 1-5/16 DPWT3753-F 3/8 3 120 1-1/2 DPWT5025-F 1/2 2-1/2 120 1-1/4 DPWT5030-F 1/2 3 120 1-1/2 DPWT5035-F 1/2 3-1/2 120 1-3/4 DPWT5040-F 1/2 4 120 2 DPWT5050-F 1/2 5 120 2-1/2 DPWT6252-F 5/8 2-1/2 120 1-1/4 DPWT6253-F 5/8 3 120 1-1/2 DPWT6254-F 5/8 4 120 2 DPWT6255-F 5/8 5 120 2-1/2
CATALOG MATERIAL DIAMETER NUMBER (IN)
DPWTWW1555 304-STAINLESS 1-3/8 STEEL
147
floatensIoner™chaIn tensIoner for 78 chaIn
FEATURES:• Reversible wear surfaces doubles
product life• Shock-absorbing high- strength
nylon webbing• Easy tensioning strap/buckle (no
tools required)• Low friction• No maintenance or lubrication• Custom colors & private labeling
available
SIZES:• Any metallic or non-metallic 78
series chain• Many other chain sizes available• Standard strap length allows 20”
c-c spread (longer strap lengths available
APPLICATIONS:• Sludge Collection
MATERIALS:• UH-PE Black Industrial (UV)• Polyurethane• Nylon
148 DiversifieD Plastics, inc.
Wall BracketsAn essential part of any tank overhaul, the DPI non-metallic Wall Bracket is lightweight, rugged, and easy to install. Retro-fit headaches are minimized with vertical adjustment and slotted mounting holes to accommodate various anchor bolt sizes & spacing. This Wall Bracket can be fabricated to length or cut to length in the field. Material options are available to help meet bid specs or application requirements.
5/8” or 3/4” Anchor BoltExisting by Customer (Mount to Tank Wall Per Installation Specs)
Elevation Grooves For Optional Adapter Plate For Wider Bolt Centers
(2)3/4” Slots For 6” Bolt Center W/3” of Vertical Adjustment
149
take up arm
Proper drive chain tension is an essential key to smooth operation and maximum service life of your components. Diversified Plastics manufactures a versatile non-metallic tensioner, take up frame to help you in maintaining your tank drive system
150 DiversifieD Plastics, inc.
chaIn
Diversified Plastics has available a wide spectrum of both metallic, and non-metallic chains. Our industry specialists have the knowledge & background to assist you in selection and applying the best options for your specific applications.
By providing this service we offer our customers the convenience of “one stop shopping” for all of your waste water needs.
Consider DPI For any metallic and non-metallic chains in your facility or the facility you service.
151
non-metallIc Bar screen rakesDiversified Plastics can offer solutions to increase the service life of your Bar Screen components by utilizing engineered plastics along with optional stainless steel componentry.
DATA NEEDED:
A = WIDTH OF RAKE:B = LENGTH OF RAKE:C = TOOTH WIDTH:D = TOOTH GAP:E = TOOTH CENTERLINE:F = LENGTH OF TOOTH:G = END OF RAKE TO FIRST TOOTH:
(CHECK BOTH ENDS)H = DISTANCE FROM RACK
TO ATTACHMENT LINK:# GAPS:# TEETH:TYPE OF CHAIN:ATTACHMENT LINK:
152 DiversifieD Plastics, inc.
IndustrIal augersDiversified Plastics offers Auger solutions to a wide variety of industries. From 4” diameter to 40” diameter our industrial augers solve the tough problems. Our patented UHMW full face ribbons are available in single flight sectional, or continuous flighting. They are abrasion resistant, non-corroding, and provide a non-stick surface. We provide variable pitch and diameters. Our ability to utilize other special materials such as urethane, gives us a broad range of problem solving solutions. By incorporating our augers with our UHMW auger pans we can also provide complete systems to address your problems. Below is a small sampling of our common sizes. Call us with your special size or material needs.
Extension Key:C-continuous flightingS-sectional flighting
Continuous Flighting
Sectional FlightAF 0909 2.0 9" 9" 2" sch 40AF 0909 2.5 9" 9" 2 1/2" sch 40AF 1212 2.5 12" 12" 2 1/2" sch 40AF 1212 3.0 12" 12" 3" sch 40AF 1414 3.0 14" 14" 3" sch 40AF 1414 3.5 14" 14" 3 1/2" sch 40
Catalogue # O.D. Pitch Pipe
Flighting Only
AU0909 BP2.0 9" 9" 2" sch 40 9'-10"AU0909 BP2.5 9" 9" 2 1/2" sch 40 9'-10"AU1212 BP2.5 12" 12" 2 1/2" sch 40 11'-10"AU1212 BP3.0 12" 12" 3" sch 40 11'-10"AU1414 BP3.0 14" 14" 3" sch 40 11'-10"AU1414 BP3.5 14" 14" 3 1/2" sch 40 11'-10"
Pitch LengthO.D. PipeCatalogue #
Augers
153
IndustrIal auger applIcatIonHog fuel Screw Auger: Customer’s auger is buried under hog fuel pile 24/7. Even after experimenting with special alloys and spray on products, they were only getting eight months life. Diversified applied its patented flighting and main beam cover system at a fraction of the cost of a new unit. This screw ran a full two years (24 months) tripling the run life and was rebuildable after the two years. Diversified also lined this pit (previously raw concrete) with UHMW. With the reduced coefficient of friction of both screw and floor, energy requirements were reduced by over 50% (results were tracked by a chart recorder placed at the m.c.c.).
Boiler Feed Screws: Customer was replacing feed screws and feed screw pans every two years. The 1⁄2” thick steel pans would be worn to as little as .050” thickness in that time. Diversified applied its patented process to the augers and supplied liners for the pans. Original bin is now four years old and still running. This customer has since re-done its other five bins with the same results.
Boiler Feed Screw Bearings: These 3-15⁄16” four bolt flange bearings replaced Rex Double Row spherical bearings. They require no lubrication, have provided long life, and in the event screw maintenance is needed, are easily removed from Stub Shafts. The old roller bearings would corrode and seize and would have to be cut off of the shaft.
154 DiversifieD Plastics, inc.
auger trough lIners
UHMW Auger Trough Liners are preformed to fit your existing pan. Their low coefficient of friction can reduce or in some cases eliminate the need for hanger bearings. They are abrasion resistant, noncorroding, and provide a non-stick surface.
* Other sizes available upon request.
AL 06 6" 10' 3/16"AL 09 9" 10' 3/16"AL 10 10" 10' 3/16"AL 12 12" 12' 3/16"AL 14 14" 12' 3/16"
Catalogue# Auger Size Length Thickness
*Liners may be ordered with either siplap or flanged mounting configurations.
155
hanger BearIngs
Hanger Bearings made from engineered plastics offer a number of problem solving advantages over their metal counterparts. Features such as self lubrication, enhanced abrasion resistance, and shock absorption are among the many advantages. Listed below are some of the many sizes and materials we offer. Feel free to call us with any custom requirements you may have.
• Temperature Range from -200°F to +500°F
1 1-1/2 1-1/16 1-7/161-1/2 2-1/8 1-9/16 1-15/16
2 2-3/4 1-9/16 1-15/16 2-7/16 3-1/4 2-3/8 2-15/16 3 4 2-3/8 2-15/16 3-7/16 4-3/4 3-1/8 3-15/16
Shaft BD BL OL Size (ID)
Hanger Bearings for Screw Conveyors - Type 226
1-1/2 2-1/4 1-3/8 1-15/16 2 3-1/4 1-5/8 1-15/16 2-7/16 4 1-5/8 2-15/16 3 4-1/2 2-1/8 2-15/16 3-7/16 4-7/8 2-11/16 3-15/16
Shaft BD BL OL Size (ID)
Hanger Bearings for Screw Conveyors - Type 230
Materials AvailableNatural UHMW P.E.*Natural Nylon*Molly Filled NylonOil Filled Nylon*PolyurethaneLaminate*FDA/USDA ApprovedEach material offers it's own unique characteristics includ-ing, Temperature/Load Speed/Coefficient of friction.
Type 226, fits hanger styles, 226, 220, 326, 20B, 26B.
Type 230, fits hanger styles 230, 216, 316, 16B, 216F.
156 DiversifieD Plastics, inc.
steel cap splIt BearIngs
Diversified Plastics Steel Capped Split Pillow Block Bearings are designed to outlast conventional babbitt pillow blocks. Our heavy duty housings are made of welded steel, then powder coated for corrosion resistance. Combine this with low cost easily replaceable “No Lube” UHMW inserts and these units are virtually maintenance free. These bearings are widely used as problem solvers in the harshest of industrial environments. Listed below are our standard sizes. Custom sizes and materials are also available.
1-3/16" 1-1/4" 1-3/4" 4-1/8" 3" 1-7/16" 1-3/8" 2" 4-7/8" 3-1/2" 1-15/16" 1-3/4" 2-1/2" 6" 4" 2-3/16" 1-7/8" 2-3/4" 6-1/2" 4-3/8" 2-7/16" 2-1/8" 3" 7" 5" 2-15/16" 2-1/2" 3-1/2" 8-1/2" 5-3/4"
1-15/16" 1-3/4" 3-1/2" 6-1/2" 4-1/4" 2-3/16" 1-7/8" 3-1/2" 6-3/4" 4-5/8" 2-7/16" 2-1/8" 4" 8" 5" 2-15/16" 2-1/2" 4-1/2" 8-3/4" 5-3/4" 3-7/16" 3-1/4" 5" 10-1/2" 7-1/4" 3-15/16" 3-1/2" 5-1/2" 12" 7-3/4" 4-7/16" 4-1/8" 6-1/4" 13-1/2" 9" 4-15/16" 4-1/2" 7" 14-3/4" 9-3/4"
Part # BoreShaft
Center
LengthThrough
BoreBolt
CenterProduct OAHBS2B1316BS2B1716BS2B11516BS2B2316BS2B2716BS2B21516
BS4B11516BS4B2316BS4B2716BS4B21516BS4B3716BS4B31516BS4B4716BS4B41516
STYLE AND MATERIAL CHART:U UHMW N NylonUR UrethaneI Insert Only
2 BOLT
4 BOLT
157
rattle roll(Belt cleaner)
Diversified Plastics “Rattle Rolls” provide an alternative to traditional belt scrap-ers. Our Rattle Rolls eliminate costly scraper blade replacement and do not wear on expensive conveyor belts. They provide years of service in the stickiest material carry over applications.
FEATURES: APPLICATIONS: • Longer Lasting (v.s. belt scrapers) • Used on conveyors in place • Centralizes Waste Material of belt scrapers etc. • Cleans inverted cleats as well as cleated • belts through vibration.• Running two dissimilar tooth profiles in • tandem provide even greater vibration and cleaning.• Abrasion & Corrosion Resistant
SIZES: MATERIALS: • 6-Tooth • UHMW with Steel or Stainless • 7-Tooth Steel Shafting • 8-Tooth • Polyurethane with steel or • 9-Tooth Stainless Steel Shafting • All widths available
158 DiversifieD Plastics, inc.
grIt collector Bucket/Wear shoe
Non-Metallic wear shoes provide superior abrasion resistance and reduce drag coefficient.
NON-METALLIC GRIT COLLECTOR BUCKETS• Light Weight• Tough• Easy To Install• Abrasion Resistant• We Can Replicate Your Existing Buckets or Retro-Fit a New Design
159
1900 ultrahIgh molecular WeIght polymer
SAND-SLURRY TEST FOR ABRASION RESISTANCEThis test can be used to determine the relative abrasion resistance of 1900 ultrahigh molecular weight (UHMW) polymer, as well as other materials. The test produces a scratching, low-stress type of abra-sive action.
Summary of Test MethodA specimen of the material to be evaluated is rotated simultaneously with a steel control specimen in a sand slurry to produce accelerated wear. The resulting wear, or abrasion, is measured as weight loss. This measurement is converted to a volumetric loss of the material by calculation from the material density.
The volumetric loss of material relative to the steel control (based on an assigned value of 100 for steel) is called abrasion index (AI). A value lower than 100 denotes a higher wear resistance than that of steel. The lower the index value, the more resistant the material is to abrasion.
TABLE II
MATERIAL1900 UHMW polymer . . . . . . . . . . . . . .10Nylon . . . . . . . . . . . . . . . . . . . . . . . . . 24Polyurethane (70D) . . . . . . . . . . . . . . 27TFE. . . . . . . . . . . . . . . . . . . . . . . . . . . 72304 stainless steel . . . . . . . . . . . . . . . 84Polycarbonate. . . . . . . . . . . . . . . . . . . 96Carbon steel . . . . . . . . . . . . . . . . . . . 100Polyacetal . . . . . . . . . . . . . . . . . . . . . 110Phosphor bronze . . . . . . . . . . . . . . . 190Phenolic laminate L.E. . . . . . . . . . . . 200Yellow brass . . . . . . . . . . . . . . . . . . . 400Hard neoprene rubber . . . . . . . . . . . 800Hickory wood . . . . . . . . . . . . . . . . . . 950
ABRASION RESISTANCE
Figure 2
160 DiversifieD Plastics, inc.
property comparIson chart
Test DelrinTM
Method CoPolymer Unified NylatronTM Polyethylene Property Units ASTM Acetat 6/6 Nylon Cast Nylon GS Teflon UHMW H .D . Polypropylene
Specific Gravity g/cm2 D-792 1 .41 1 .15 1 .15-1 .16 1 .16 2 .1-2 .3 0 .94 0 .952 0 .905
Ultimate Tensile Strength, @73˚F pst D-538 11,000/10 .000 11,000 11,5000-12,000 12,500 1,500-5,000 6,800 3100-5500 4300-5500
Elongation, @73˚F % D-638 30 50 20-30 25 250-300 450 20-1000 200-700
Compressive @10% Deflection-Strength psi D-638 16,000/15,000 12,000 14,000-15,000 16,000 — — 2700/3600 5600/8000
Tensile Modules of Elasticity, @73˚F psi D-638 450,000/400,000 400,000 400,000 480,000 50,000-90,000 — — .18 x 103
Tensile Impact Strength, @73˚F tr/lb/in2 D1822 50 100 70-80 75 — 708 — —
Flexural Strength, @73˚F psi D-790 13,000/12,000 14,000 16,000 17,000 NO BREAK — 3,200 6,000-8,000
Flexural Modules of Elasticity, @73˚F psi D-732 450,000/400,000 400,000 500,000 480,000 525,000-650,000 110,000 1 .11 175,000
Shear Strength psi D-732 9,000-8,000 10,000 10,500-11,000 16,000 90,000-110,000 3,500 3,380 5,710
Coefficient of Friction (Dry vs . Steel) Dynamic — — .15- .35 .17- .43 .16- .25 .15- .35 .04- .10 .15- .20 — —
Hardness: Rockwell „R”,@73˚F — D-785 M89/M88 M80 M80 M80 10-20 64 67 92
Durometer „D”,@73˚F — D676 D86/D85 D80 D85 D85 55-70 67 72 76
Continuous Service Temperature In Air (Max .) OF — 180 220 200 220 — 200 250 225-300
Deformation Under Load 2,000psi @ 122˚F % D-621 0 .3-1 .0 1 .0-3 .0 0 .5-1 .0 0 .5-2 .5 9-11 — — —
Heat Deflection: 264 psi OF D-648 250/240 200 200 200 100-140 174 151 —
66 psi OF D-648 316-338 — 400-425 400-490 — 115 170 210
Coefficient of Linear Thermal Expansion (in/inF x 10-4) in/in/ OF D-695 407/504 505 305 305 5055-705 103 x10-4 106 x10-4 9 .58-10-4
Melting Point OF D-789 347/335 500 420 500 621 +-9 270 270 335
Dielectric Strength, short time in air at 73˚F v/mil D-149 450/420 400 400-500 350 500-650 900 488 450-650
Volume Resistivity @73˚F QHM-CM D-257 1 .0 x 1014 4 .5 x 1013 2 .5 x 1012 2 .5 x 1013 1015 >1018 8 .37 8 .45
Dialectric Constant:
60Hz — D-150 3 .7 4 .1 3 .7 — 2 .0-2 .1 2 .3-2 .35 2 .63 2 .25
10Hz — D-150 3 .7 — — — 2 .0-2 .1 2 .3-2 .35 — —
106Hz — — 3 .7 — — — 2 .0-2 .1 2 .3-2 .35 — — Water Absorbsion 24 hrs . Immersion % D-570 0 .2 0 .3 0 .3 0 .3 < .01 NIL <0 .03 .01/ .03 Saturation % D-570 0 .9 7 .0 7 .0 7 .0 — NIL — —
TYPICAL APPLICATIONS: Gears, Bearings, Cams, gears Bearings, bushings Gaskets, spacers Bushings, Washers, Appliances, bushings, bushings, valve seats, valve seats, seal rings, rollers, rollers, spacers, bearings, gears & guides . washers seats . water surfaces . bearings . Thermoformed & washers . pulleys .
TYPICAL PROPERTIES: High strength, Good wear Wear resistance, Wear resistance, Extreme corrosion Tough High abrasion Low cost dimensional resistance, low high tensile low surface friction, resistance . Engineering resistance good impact stability, friction, light strength, low high strength high dielectric equipment high impact, & chemical resilient . weight . friction . & rigidity . strength . low friction . resistance .
PROPERTY COMPARISON CHART
MECHANICAL
THERMAL
ELECTRICAL
161
gypsum
products for specIfIc IndustrIes
AG Chain Sprockets ......................................................................................................................... 33Auger Trough Liners.......................................................................................................................... 62Chain Guide .................................................................................................................................70-71Chain Tops ........................................................................................................................................ 78Discharge Port ................................................................................................................................ 162Diversa-Track - Curved & Straight Track For Table Top Chain ........................................................ 75Diversaliner ........................................................................................................................................ 81Dryer Hanger Bearing ....................................................................................................................... 17Dryer Hold Down Wheel ................................................................................................................. 108EA-55 Polyurethane ......................................................................................................................... 82Flat Top Conveyor Sprockets ......................................................................................................34-35Flat Top Idler Wheels ......................................................................................................................... 36Hard Edge Port ............................................................................................................................... 163Industrial Augers ............................................................................................................................... 60Mill Chain Sprocket ........................................................................................................................... 37Molded Rollers .................................................................................................................................. 58Pillow Block Bearing .......................................................................................................................... 5Rattle Roll .......................................................................................................................................... 66Roll End Bearings ........................................................................................................................19-21Roller Chain Sprockets ................................................................................................................26-30Self Aligning Bearing Housings Pillow Block Style........................................................................... 9Self Aligning Bearing Housings 2bolt/4bolt ...................................................................................... 10Self Aligning Bearing Insert ................................................................................................................ 8Split Pillow and Split Block Bearing .................................................................................................. 11Spur Gears ........................................................................................................................................ 41Stainless Steel Hex Shaft Adapter ................................................................................................... 22Steel Cap Split Bearings .................................................................................................................. 12Suction Rings .................................................................................................................................. 164Transition Boot ................................................................................................................................ 165UHMW Oregon Bend ...................................................................................................................... 76Urethane Crown Pulley .................................................................................................................... 86Urethane Rolls .................................................................................................................................. 84Urethane Wheel Recover................................................................................................................. 85Wheels and Rollers .......................................................................................................................... 57
162 DiversifieD Plastics, inc.
dIscharge port
FEATURES: APPLICATIONS:• Durable • Gypsum Forming Line• Abrasion Resistant • Longer Life
SIZES: MATERIALS:• 7/8” bore • 70D Polyurethane• 1” bore
163
hard edge port
FEATURES: APPLICATIONS:• 3 times longer life than steel • Used on Hard Edge Mixers• Cost Efficient
SIZES: MATERIALS:• 3/4” I.D. • Polyurethane• 7/8” I.D.
164 DiversifieD Plastics, inc.
suctIon rIngs
FEATURES: APPLICATIONS:• Non-Marking • Suction Feeders• Durometers Ranging From • Saws 50A – 90A • Sanders
• High Tear Strength • Coatings and Wear Characteristics
SIZES: MATERIALS:• 11.5" O.D. • Urethane• 13.0" O.D. • TPE Elastomers• Custom Sizes Available
165
transItIon Boot
FEATURES: APPLICATIONS:• High Abrasion Resistant • Urethane nozzle used to distribute mud• Interchangeable in sheet forming line in Gypsum plant• Cost Effective
SIZES: MATERIALS:• Custom sizes available • Polyurethane
166 DiversifieD Plastics, inc.
IndexAAG Chain Sprockets .................................................................................33
AGriCulture ........................................................................................128
AuGerS & ACCeSSorieS ....................................................................59
Auger trough liners ....................................................................... 62, 154
BB7 Series Plastic Modular Belting ........................................................44
B8 Series Plastic Modular Belting ........................................................45
B9 Series Plastic Modular Belting ........................................................46
B13 Series Plastic Modular Belting ...................................................... 47
B14 Series Plastic Modular Belting ......................................................48
B15 Series Plastic Modular Belting ......................................................49
B16 Series Plastic Modular Belting ......................................................50
Bar Screen Conversion......................................................................... 130
BeArinGS & BuShinGS ......................................................................... 4
Belting & Accessories .............................................................................43
Belt PulleyS .........................................................................................51
Bushings (Cylindrical Sleeves) ..............................................................14
Bushings (Flanged) ................................................................................. 15
CCan line Pulley .........................................................................................55
Carriage Wheels .......................................................................................88
Carry & return Wear Shoes ................................................................144
Carry-over Wheel.....................................................................................89
Chain ........................................................................................................150
Chain Guide .........................................................................................70-71
Chain tops .................................................................................................78
ChAin GuideS & AttAChMentS .......................................................69
Conveyor Belt ACCeSSorieS .........................................................65
Credit & returned Goods Policy.......................................................... 167
Custom 720 Sprockets ..........................................................................134
Custom non-Metallic drive Sprockets ...............................................137
Ddischarge Port ........................................................................................162
diversaliner ................................................................................................81
diversa-track - Curved & Straight track for table top Chain .........................................................................75
diverter Arms ............................................................................................90
doffing roll Spacers ..............................................................................106
drag Chain idler drums ..........................................................................39
drag Chain Sprocket ...............................................................................38
drag Flights (long link Chain) .............................................................77
drive CoMPonentS ............................................................................23
drive hubs - roller Chain Sprockets & Gears ....................................32
dryer hanger Bearing ............................................................................. 17
dryer hold down Wheel .......................................................................108
EeA-55 Polyurethane .................................................................................82
even ending roll ......................................................................................91
FFasteners ...................................................................................................73
Flange Bearings 2-Bolt & 4-Bolt ............................................................. 7
Flat-top Conveyor Sprockets ...........................................................34-35
Flat-top idler Wheels...............................................................................36
Flight Filler Blocks ............................................................................... 145
Floatensioner™ ......................................................................................147
Floatensioner™ Chain tensioner...........................................................79
Food ........................................................................................................126
Forming line Perforated Plate ............................................................101
“FrP” Sludge Collection Flights .........................................................142
GGeArS ........................................................................................................40
Gear racks ................................................................................................42
Grit Collector ..........................................................................................158
Grit Collector Conversion ......................................................................131
GyPSuM ..................................................................................................161
Hhanger Bearings ........................................................................18, 64, 155
hard edge Port .......................................................................................163
high torque (Belt) drive Sprockets......................................................53
hot Press Platten Guides ............................................................. 103, 109
Iimpact Conveyor retro-Fits ...................................................................67
industrial Augers .............................................................................60, 152
industrial Auger Application .......................................................... 61, 153
JJaw Clutch Shear Pin drive Sprocket Assembly ............................ 140
J-hooks ......................................................................................................92
KKiln Cart Bushings ................................................................................... 16
Knock down Arm Cylinder external Cushion .....................................117
LluMBer Mill .........................................................................................87
MMetering & Spice Augers........................................................................63
Mill Chain Sprocket .................................................................................37
MininG ....................................................................................................127
Molded 700 Series Sprockets ..............................................................133
Molded rollers ..........................................................................................58
Nnon-Metallic Bar Screen rakes ..........................................................151
PPAnel ......................................................................................................100
Paper roll Crane hook liners ...............................................................119
Pillow Block Bearing ................................................................................. 5
Plastic roller Chain ...........................................................................24-25
PlyWood ................................................................................................ 107
Polyurethane Panel turner Accessories eA-55 energy-Absorbing ..........................................................................102
PolyurethAne ProduCtS ................................................................80
Press Charger Star Gears .....................................................................104
ProduCtS For SPeCiFiC induStrieS ..........................................87
Property Comparison Chart .................................................................160
PulP & PAPer .......................................................................................118
Pusher lugs ..............................................................................................93
Rrattle roll ......................................................................................... 66, 157
raymond Plugger Gears ........................................................................110
rectangular Sludge Collector ..............................................................132
reel Spool & roll Cushions ..................................................................120
replacement Flight data ......................................................................143
replacement Sprocket Segments...................................................... 135
roll end Bearings............................................................................... 19-21
roller Chain Sprockets ......................................................................26-30
roller lugs & lug Pins ...........................................................................94
roll handling Stops & Bumpers ..........................................................121
rotary Clipper Shear .............................................................................. 111
SScalping roll Spacers ...........................................................................122
Self-Aligning Bearing housings 2-Bolt & 4-Bolt Flange ................... 10
Self-Aligning Bearing housings Pillow Block Style ............................. 9
Self-Aligning Bearing insert ..................................................................... 8
Skinner deck hold down Wheel ......................................................... 112
Skoog Plugger Sweeps ......................................................................... 113
Slider Blocks .............................................................................................95
Solid torque drives™ ..............................................................................31
Split Pillow & Split Block Bearing..........................................................11
Split Set Collar & Split Static Shaft Sleeve Bushing .......................141
Split tipple Bearing .................................................................................13
Spreader Wheels Sand, Salt & Fertilizer .............................................83
SProCKetS ..............................................................................................23
Spur Gears .................................................................................................41
Stainless Steel hex Shaft Adapter ........................................................22
Stainless Steel Shaft Protector inserts .................................................. 6
Standard uhMW Strip Fastening recommendations ....................... 74
Steel Cap Split Bearings ................................................................12, 156
Sticker Placement Arms .........................................................................96
Suction Box Cover..................................................................................123
Suction rings .........................................................................105, 114, 164
Swede roll.................................................................................................97
Ttake up Arm .......................................................................................... 149
thin Gauge Wearstrip .............................................................................72
tidland Core Shaft Cradle ....................................................................124
timing Belt Pulleys ..................................................................................52
tipple Arm .................................................................................................98
transition Boot ........................................................................................165
UuhMW oregon Bend ...............................................................................76
urethane Crown Pulley ...........................................................................86
urethane rolls ..........................................................................................84
urethane Wheel recover ........................................................................85
Vv Belt Sheaves ..........................................................................................54
veneer Knockdown Arm ........................................................................116
veneer & lumber Cart Wheels ......................................................99, 115
venturi dampers .....................................................................................125
vibriatory Conveyor replacement Springs ..........................................68
WWall brackets ......................................................................................... 148
Warranty disclaimer & exclusions .....................................................168
WASte WAter treAtMent ..............................................................129
Wearstrip & Fasteners ......................................................................... 146
WheelS & rollerS .......................................................................56-57
0-91900 ultrahigh Molecular Weight Polymer .......................................159
78 Series non-Metallic 2.609” Pitch ................................................. 138
78 Series Split non-Metallic dished drive Sprockets .................... 136
78 Series Shear Pin Sprocket 2.609” Pitch ..................................... 139
167
credIt & returned goods polIcyAll returned material and/or credits must reference a Return Goods Authorization Number (RGA#). You may obtain an RGA# by contacting your Sales Representative. In some instances it may be necessary for the Diversified Plastics Representative to inspect material prior to an RGA# being issued. An RGA# authorizes the return, but may not result in a credit. To assist the various departments within your company in handling any discrepancies or damaged goods and to allow Diversified Plastics, Inc. to maintain proper accountability, we have established the following guidelines for these different circumstances that may occur:
I. Invoice AdjustmentsNotify your Sales Representative of any invoicing discrepancies or adjustments before issuing debit memos.
II. Incorrect ShipmentsNotify your Sales Representative of any incorrect shipments (i.e., shortages, over-shipments, incorrect materials) within five (5) working days of receipt of shipment.
III. Damaged Goods/PackagingReport to your Sales Representative within twenty-four (24) hours any visible damage (i.e., obvious part damage, skids, banding, etc.) observed upon receipt of shipment. Damaged shipments must be signed for with exception and damages clearly identified on the bill of lading.
IV. Manufacturing DefectsAny defective material (i.e., out of tolerance - length, width, gauge) must be reported to Sales Representative within ninety (90) days after receipt of shipment.
V. Collect ReturnsDiversified Plastics, Inc. will specify carrier on all collect returns.
VI. Final DecisionFinal credit decision will be made after the return has been evaluated by Diversified Plastics, Inc. Notification of that decision will be given within thirty (30) days.
VII. Restocking FeeA twenty percent (20%) restocking fee and/or prepaid freight may apply in certain instances.
VIII. Product GuaranteeDiversified Plastics, Inc. has a 100% return guarantee on all standard stock products. All custom products will be guaranteed only by what is negotiated at the time of purchase and acceptance of conditions must be in writing. Anything not expressed in writing at the time of purchase cannot be assumed to be eligible for warranty consideration. If a product proves to be under guarantee, Diversified Plastics, Inc. will pay for the return of the product and upon receiving will repair or re-issue correct product. The customer is responsible for returning product within 30 days after receiving a Return Goods Authorization Number (RGA#). The customer is also responsible for packaging product well and placing on adequate skid or box as to avoid damage in transit.
3721 Grant Creek Rd. Missoula, MT 59808 • Phone (406) 543-6653 • Fax (406) 728-4074
We cannot anticipate all conditions under which this information and our products, or the products of other manufacturers in combination with our product, may be used. We accept no responsibility for results obtained by the application of this information or the safety and stability of our products, either alone or in combination with other products. Users are advised to make their own tests to determine the safety and suitability of each such product or product combination for their own purposes, unless otherwise agreed in writing.
168 DiversifieD Plastics, inc.
lImIted Warranty dIsclaImer & exclusIons
3721 Grant Creek Rd. Missoula, MT 59808 • Phone (406) 543-6653 • Fax (406) 728-4074
We cannot anticipate all conditions under which this information and our products, or the products of other manufacturers in combination with our product, may be used. We accept no responsibility for results obtained by the application of this information or the safety and stability of our products, either alone or in combination with other products. Users are advised to make their own tests to determine the safety and suitability of each such product or product combination for their own purposes, unless otherwise agreed in writing.
The Seller warrants that the Goods and/or Service will be free from defects in material and workmanship for a period of three months from date of their initial use or six months respectively from delivery, whichever is the first to expire.
The sole obligation of Diversified Plastics, Inc. under this Limited Warranty shall be to repair or replace or have its Authorized Distributor repair or replace any defective products within 45 business days of a complaint communicated in writing to Diversified Plastics, Inc. Except as expressly provided herein, Diversified Plastics shall not be liable for the breach of any warranty, express or implied, including without limitation any warranty of merchantability of fitness for a particular purpose, or for any damages or other liability arising out of or in connection with customers’ use of supplier products or Diversified Plastics or the authorized distributor designing, manufacturing or selling supplied products. In no event shall Diversified Plastics be liable for direct, special, incidental or consequential damages, including without limitation lost sales or profit, lost production or output, injury to property or reputation, or any other damages whether arising in contract or tort or otherwise (whether or not attributable to the fault or negligence of Diversified Plastics). Under no circumstances shall any recovery of any kind against Diversified Plastics be greater in amount than the price of the products and/or service to the end user.
NOTE: Products that have been modified and/or altered from their original state without expressed, written consent of a Diversified Plastics representative shall void this and any other warranty written or expressed. All returned materials shall be evaluated by Diversified Plastics engineering and sales staff prior to credit and rework. Product being returned for evaluation must include a valid “Returned Goods Authorization” number (RGA#).
169
NOTES
170 DiversifieD Plastics, inc.
NOTES
DIVERSIFIED PLASTICS, INC. E
ngineered Plastic P
ower Transm
ission Products
2009-2010
3721 Grant Creek Road • Missoula, Montana 59808Phone (406) 543-6653 • Fax (406) 728-4074 • Toll Free (800) 321-0084
E-mail [email protected]
VI