distribution statement c: authorized for government agencies and their contractors only

Distribution Statement C: Authorized for Government Agencies and their Contractors Only

2


SSP T&ME LCS

Program Overview

Michal Dusendang

(812) 854-2358

[email protected]

3


Topics

• SSP TME LCS Organization• SSBN• SSGN• Key Program Instructions• Key Responsibilities• SSP Technical Branches• SSP TME Requirements Process• NAVSEA Requirements Process

4


SSP LCS Organization

SWFLANT/PAC(TSBs)

J. LANGE / S. SCHAFER

SP2015B. MORRISON

NAVSEA 07T112F. COLEMAN

NSWC CORONA (QAM)

P. THORNBERRY

NSWC CRANE(CSM)

R. ALLEN

UII(CDM)

O. ROBINSON

NSWC CORONA, MSD

(CTM)R. FIGURRES

STRATSYS SSGLUK CAL LAB

NAVY TAMSEXECUTIVE

BOARD

SP201J. SCHAEFER

SP2016M. RIVERA

SP20163E. ZACHARIA

TME LCS

SP206P. VOTH

LOGISTICS

SP502A. HUNT

INTERFACE ROLE

5


SSBN

Fourteen Ohio-Class SSBNs Eight home ported in Silverdale, WA Six home ported in Kings Bay, GA

Notional Schedule: 21 day maintenance period at home port (Silverdale, WA or Kings

Bay, GA), 90 Day deployment. Two Crews (Blue/Gold)

Calibration Support: Calibration exchanges of portable T&ME conducted during 21

Day maintenance period – 100% portable T&ME calibrated at all times

SWFPAC/SWFLANT Navy Calibration Laboratories support/coordinate installed and installed removable “I” Level T&ME calibration support.

6


SSGN

First Four Ohio-Class SSBNs converted to SSGN USS Ohio, USS Michigan, USS Florida, USS Georgia

Notional Schedule: 3-Month Major Maintenance Period at home port (Bremerton, WA

or Kings Bay, GA), 15 month deployment, including 3 forward deployed voyage repair periods (VRP).

Calibration Support: Two calibration exchanges of portable T&ME conducted during

MMP (upon return from deployment, and just prior to departure) Calibration exchange of portable T&ME conducted at each VRP to

lessen impact on forward labs. Short interval installed instruments supported by VR site

laboratories USS Frank Cable (AS-40) – Guam

NAVAIR Calibration Laboratory – Diego Garcia

7


Key Program Instructions

• OPNAVINST 3960.16A (TMDE, ATS, METCAL)• SSPINST 4200.7C (T&ME LCS Instruction)

• OPNAVINST 4000.57F (TRIDENT Logistics Support)

• OD63913 (METPRO)• OD55373A (T&ME LCS Procedures)• OD55551 (SSBN Substitution Guide)• OD64498 (SSGN Substitution Guide)• OD65701 (Calibration Support Procedures for SSGN

Forward Deployment)

8


Key Responsibilities for LCS

SSPINST 4200.7C (T&ME LCS Instruction)• Paragraph 3.a T&ME covered by this instruction…

– (1) All SWS, AWS and non-SWS/AWS GPTE, SPTE, GPS and SPS onboard SSBN/SSGN

• Paragraph 7 Responsibilities…– f. NAVSEA and SPAWAR shall:

• Submit data sheets

• Outfit and replace non-SWS T&ME (excluding exchange pool)

• Provide support for new requirements (procedures, intervals, equipment)

• Provide maintenance documentation to NSWC Crane

• Provide authorized substitute information for OD55551

• Ensure that NAVSEA resources (e.g., provision of authorized onboard FCA portable calibrators, audit of FCAs, evaluation and certification of FCAs, provision of “O” level calibration procedures)….and notify SSP when changes are planned.

9


SSP Technical Branches

LAUNCHERSUBSYSTEMNORTHROPGRUMMAN

MARINE SYSTEMS

GUIDANCESUBSYSTEM

CHARLESSTARK DRAPER

LABORATORIES, et al

FIRE CONTROLSUBSYSTEM

GENERAL DYNAMICSADVANCED INFORMATION

SYSTEMS

TRIDENT MISSILELOCKHEED MARTIN

SPACE SYSTEMS COMPANY

INSTRUMENTATION SUBSYSTEMINTERSTATE ELECTRONICS CORP NAVIGATION

SUBSYSTEMLMNE&SS/BOEING

REENTRYSUBSYSTEM

LOCKHEED MARTINSPACE SYSTEMS COMPANY

SUBMARINE SSBN/SSGNGENERAL DYNAMICS

ELECTRIC BOAT CORP.

N

E

S

W

SP22 SP28

SP23 SP27

SP23SP23/27

SP24

NAVSEA/SP21

10


SSP Requirements Process

Originator (generally contractor) initiates T&ME Requirement (Data Sheet) via web site https://tmecranrdte.navy.mil

11



Data Sheet Identifies:

• Originator and Approving Official (SSP or NAVSEA Cog)

• New, Revised or Cancelled Requirement• SPTE or GPTE• Specific Model, Accessories, Authorized Substitutes

chosen from OD 54585 Selection List• Procurement Required and by who• Calibration Support (Completed by MSD)• Repair Support• Allocation (SSBN, Work Center, Qty, Prime System)• Procedural Documents for Requirement (MRC, SMP,

Tech Manual, RPM, etc.)

12



13



Electronic Data Sheet Routing Process Flow

• Originator Creates• Designated Government Rep Approves• NSWC Crane Review

– Ensure proper TME selection and non-proliferation

– Update allowance documentation, initiate procurement, update OD55551 (SSBN Substitution Guide)

• NSWC Corona Review– Determine calibration support level, update

METRL, identify ICP

14



15


NAVSEA Requirements Process

Upload PMS FR

Run comparison

routine

Identify MRCs added,

deleted or changed

Identify T&MEimpact

New Requirement

Proliferation of

T&ME

Link Requirement to Data Sheet

Generate “Matrix” of Data Sheet requirements

Cancel Requirement and Remove T&ME if required

Use Equipment Onboard

No

Yes

No

Yes

Initiate Data Sheet

16


NAVSEA Requirements Data

17


T&ME Matrix

18


NAVSEA 08 Requirements Process

• BPMI generate new requirements (Data Sheets)

• NAVSEA 08 approve requirements

• NAVSEA 08 determine revised or cancelled requirements

• BPMI procure initial outfitting and exchange pool

• NSWC Crane push requirements to exchange pool/boats (need schedule)

• NSWC Crane update GPTE Addendum with NAVSEA 08 SCAT requirements

• NAVSEA 08 remove SCAT requirements from QCOSAL?

• NSWC Crane update “Matrix”

19


Questions?

distribution statement c: authorized for government agencies and their contractors only

Documents

distribution statement

government agencies

zacharia tme lcs sp206

nonsws tme

lcs sspinst

ssgn forward deployment

ssgn uss ohio

day deployment