displaynet dn 100 data
DESCRIPTION
ÂTRANSCRIPT
DisplayNet™ isn’t just new technology,it’s a new paradigm for AV system integration.Welcome to the future.
ZERO COMPROMISEINFINITE POSSIBILITIES
ZERO COMPROMISEDisplayNet™ is an award-winning new concept for AV distribution that leverages proven 10GbE Ethernet technology to switch, extend and distribute uncompressed AV signals in real time with resolutions up to 4K (UHD). DisplayNet™ provides unmatched image quality with zero frame latency, zero compression and zero artifacts.
INFINITE POSSIBILITIESDisplayNet™ delivers unprecedented levels of scalability, versatility and reliability and supports a wide range of applications including point-to-point Extension, limitless Matrix Switching, Video Wall Display and MultiViewer*. DisplayNet™ isn’t just new technology, it’s a new paradigm for AV system integration. Welcome to the future.
*MultiViewer capability coming Q4.2016.
DisplayNet™ Zero Compromise, Infinite Possibilities1
DisplayNet™ DN-100 Series
AV-over-10GbE Signal Distribution
The DN-100 Series is the first in an expanding range of DisplayNet™ AV-over-10GbE products. Each DN-100TX transmitter unit accepts multiple source signals including HDMI (with embedded audio and HDCP), analog stereo audio, bidirectional IR, RS-232, and 1GbE Ethernet. These input signals are packetized into a single 10GbE link, without the use of CODECs, and are distributed to destinations via an off-the-shelf 10GbE network switch using a single CAT6a or CAT7 cable up to 328 ft. (100 meters). The 10GbE switch provides a highly efficient and reliable means of distributing AV signals from many sources to an array of DN-100RX receiver units, which convert the packetized 10GbE data to AV output signals at the destination in real time without frame latency or any loss of image quality.
Zero Compromise, Infinite Possibilities
The DN-100 Series distributes uncompressed video with resolutions up to 4K /30p (4:4:4) and 4K /60p (4:2:0) without image artifacts and without frame latency. Video signals may be routed in Point-to-Point, Matrix Switching and Video Wall modes all in the same system. For optimum flexibility, each signal plane (Video, Audio, IR, RS-232, etc.) can be routed completely independently from one another. Advanced audio features are supported, including: networked audio, audio embedding, de-embedding and down-mixing. DN-100 Series transmitter and receiver units are controlled by a DisplayNet Server™, which includes powerful DisplayNet Manager™ software that enables the system to be managed using any third party controller using simple Telnet commands.
DN-100 SeriesHDMI 10GbE Transmitter / Receiver
DVIGear • 1059 Triad Court, Suite 8, Marietta, GA 30062 • Tel: 770.421.6699 • Toll Free: 888.463.9927 • Fax: 770.234.4207 • [email protected] • www.dvigear.com 2
DN-100 SeriesHDMI 10GbE Transmitter / Receiver
Features
• Distributes AV signals using off-the-shelf 10GbE network switches
• Fast / Seamless Switching of HDMI signals up to 4K /30p (4:4:4), and 4K /60p (4:2:0)
• Vastly superior to existing Video over IP products: zero frame latency, no compression, no artifacts
• Supports HDMI, HDCP, Embedded Audio, Analog Stereo Audio, Bidirectional IR, RS-232 and 1GbE over 10GbE link
• Fully Routable, Independent Switching Planes for all signal types (e.g. Video, Audio, IR, RS232, etc.)
• Supports Audio Embedding, De-embedding and Down-Mixing
• Create, save, and use video wall configurations with optimized bezel correction
• Unconstrained scalability – Size of I/O array only limited by number of 10GbE switch ports
• Maximum range up to 100 meters (328 ft.) using a single CAT6a or CAT7 cable
• Maximum range up to 30 km using 10GbE optical version (available Q3.2016)
• DisplayNet Server™ and DisplayNet Manager™ enable deep integration into new or existing AV systems
• All endpoints include a built-in 1GbE Ethernet switch for high-speed local network connections
Benefits
• Leverages decades of proven networking technology and massive global deployment of 10GbE networks
• AV assets no longer need to be aggregated at a central location using an expensive AV Matrix Switcher
• Eliminates the need for costly, redundant AV networks as all AV assets can now reside on existing IT networks
• Enables IT Managers to easily manage and distribute AV assets within corporate network environments
• 10GbE network switches can be up to 60% smaller than typical AV switches and up to 1/10th the cost
• Scalable – system array limited only by the number of installed endpoints and size (ports) of 10GbE switch
• High-speed uplinks on many 10GbE switches allow increased port capacity without obsoleting existing hardware
• Capable of concurrent Video Wall and Matrix Switching operation – supports diverse range of applications
• Embedded Local Management – DisplayNet™ auto-configures all connected devices even in the most complex networked systems, thus eliminating the need for complicated network switch configuration
DisplayNet™ Zero Compromise, Infinite Possibilities3
DN-100 SeriesHDMI 10GbE Transmitter / Receiver
DN-100TX HDMI 10GbE Transmitter
DN-100RX HDMI 10GbE Receiver
Front View
Rear View
Front View
Rear View
DVIGear • 1059 Triad Court, Suite 8, Marietta, GA 30062 • Tel: 770.421.6699 • Toll Free: 888.463.9927 • Fax: 770.234.4207 • [email protected] • www.dvigear.com 4
DN-100 SeriesHDMI 10GbE Transmitter / Receiver
Matrix Switcher Operation
DisplayNet™ harnesses the power and cutting edge technology behind the massive global deployment of 10GbE switches used in data centers across the world. Unlike traditional AV matrix switchers that are based on closed, proprietary designs, 10GbE switches utilize open technology proven to provide an extremely efficient and reliable way to move immense amounts of data in real time. The 10GbE standard itself represents decades of collaborative development from the world’s leading IT technology companies. The combined innovation, cost, efficiency, scalability and 24/7/365 reliability make 10GbE switches a vastly superior solution for AV signal distribution.
Unlike traditional AV matrix switchers, the number of endpoints in a DisplayNet™ system is only limited by the number available 10GbE switch ports. Since 10GbE is fully duplex (10Gbps upstream and downstream), any switch port can be assigned to a DisplayNet™ transmitter or receiver unit. I/O arrays of virtually any size are possible by proper selection of the central 10GbE switch. The embedded intelligence in all DisplayNet™ endpoints enables units to be hot-plugged and recognized by the system within a few seconds. This feature allows systems to be easily reconfigured and/or expanded in the field without the need for extensive programming. Thanks to its extensive features and versatility, DisplayNet™ renders traditional AV matrix switchers obsolete and is the ideal solution for small, medium, large and massive AV signal distribution systems.
DisplayNet™ Zero Compromise, Infinite Possibilities5
DN-100 SeriesHDMI 10GbE Transmitter / Receiver
Video Wall Operation
DisplayNet™ supports concurrent matrix switcher and video wall operation within the same system. In Video Wall mode, a single source may be displayed across multiple screens or projectors. An HDMI signal from a single DisplayNet™ transmitter unit is sent to an array of DisplayNet™ receivers, with each driving a single video wall screen or projector. The DisplayNet™ receivers do not perform any scaling. Instead each receiver is assigned a segment of the video source based on how the wall is configured. The result is that multiple screens are effectively combined to achieve a single large-scale display. The DisplayNet Manager™ software includes a video wall configuration tool that can be used to create, save, and use a virtually unlimited number of wall configurations.
By concurrently supporting both matrix switching and video wall capabilities in the same system, DisplayNet™ provides two valuable display solutions in one, scalable product. This unique capability gives system integrators the power to go beyond the limits of traditional AV distribution products.
DVIGear • 1059 Triad Court, Suite 8, Marietta, GA 30062 • Tel: 770.421.6699 • Toll Free: 888.463.9927 • Fax: 770.234.4207 • [email protected] • www.dvigear.com 6
DN-100 SeriesHDMI 10GbE Transmitter / Receiver
System Management and Control
DisplayNet Server™
DisplayNet™ systems consist of multiple transmitter and receiver endpoints, a 10GbE network switch and a DisplayNet Server™, which provides the interface layer required to control and manage the entire system. Using DisplayNet Server™ (p.n. DNS-100), systems can be managed using a number of control methods, which enables the technology to be seamless integrated into a variety of workflows. DisplayNet Server™ provides a central interface between the control equipment/software and the DisplayNet™ endpoint devices; therefore, it should be included with every DisplayNet™ system.
DisplayNet Manager™
DisplayNet Manager™ is a Windows-based software application that controls and configures DisplayNet™ endpoint devices, Video Walls and overall systems. It provides a host powerful control features, as well as tools to facilitate the use of third party controllers that enable DisplayNet™ to be easily integrated into a wide range of professional AV applications. DisplayNet Manager™ makes the system integration process easier, faster and more efficient.
DisplayNet™ API Command Set
While DisplayNet Manager™ provides a graphically intuitive method of controlling DisplayNet™ systems, it is possible to use the DisplayNet™ API Command Set to interface directly with third party controllers. For instance, DisplayNet™ API commands may be loaded into a third party controller device and issued via Telnet to the DisplayNet Server™, which then distributes the commands to the overall DisplayNet™ system and endpoints. This approach allows DisplayNet™ systems to easily be integrated into existing control systems and workflows.
DisplayNet™ Zero Compromise, Infinite Possibilities7
DN-100 SeriesHDMI 10GbE Transmitter / Receiver
AV
LANControl
10GbE
10 / 100 / 1000 BaseT10 / 100 / 1000 BaseT
DN-100TX
DN-100TX
DN-100TX
DN-100TX
DN-100RX
DN-100RX
DN-100RX
DN-100RX
Third Party ControllerDisplayNet Manager™API Commands
Destinations
System Management
Sources
DisplayNet Server™
10GbE EthernetSwitch
Corporate Network(Optional)
DVIGear • 1059 Triad Court, Suite 8, Marietta, GA 30062 • Tel: 770.421.6699 • Toll Free: 888.463.9927 • Fax: 770.234.4207 • [email protected] • www.dvigear.com 8
DN-100 SeriesHDMI 10GbE Transmitter / Receiver
Supported AV SignalsVideo HDMI v1.4, DVI 1.0 and HDCP 1.4
HDCP Supports HDMI signals with or without HDCP encryption
Embedded Audio
Supports routing of up to 8 channels of HDMI embedded LPCM digital audio with up to 24 bits per sample and 192 kHz sampling frequency.
Supports pass-through of embedded HBR audio formats such as: Dolby Digital TrueHD, and DTS-HD Master Audio.
External Audio Unbalanced analog stereo audio inputs and outputs
Audio-over-IP Supports networked audio pass-through using 1GbE port
Ethernet Built-in 1GbE Ethernet switch on all Tx and Rx units
IR Control Supports bidirectional IR pass-through
RS-232 Control Supports bidirectional RS-232 pass-through with up to 115,200 baud
Connections / IndicatorsHDMI Input / HDMI Output 1x 19-pin Female HDMI connector
Analog Stereo Audio 1x 3.5mm Stereo-Mini Jack (Input for TX and Output for RX)
10GbE and 1GbE Ports (1) 2x shielded RJ45 connectors with LED indicators
RS-232 1x 3-pin, 3.5mm pitch, Phoenix connector, mates with Phoenix p.n. 1844223
IR Control1x IR IN: 3.5mm Stereo Mini-Jack 1x IR OUT: 3.5mm Mini-Jack
DC Power 1x 5.5 mm / 2.0 mm female locking connector
Diagnostic LEDs Power, HDMI Link, TX/RX Link, and Status LEDs
Hardware Reset 1x push-button to restore factory default values
PerformanceSupported Resolutions Supports resolutions up to 4096x2160 or 3840x2160 /30p (4:4:4), and 3840x2160 /60p (4:2:0)
Maximum Pixel Clock Freq. Supports pixel clock rates up to 300 MHz
Maximum Video Bit Rate Supports digital signal bit rates up to 3.0 Gbps./color, 9.0 Gbps. total
Switching Planes Independent switching planes for all connected Video, Audio, RS-232 and IR signals
Video Signal Latency
Genlocked Mode: 40 μsec. Fast Switched Mode: not more than 2x video frames @ 60Hz not more than 33.3 msec. @ 30Hz not more than 67.7 msec.
10GbE Switch Requirements Required Features: 10GbE, non-blocking, Layer 2, Multicast with IGMP Snooping, Fast Leave
Supported I/O Switching Array Size of I/O array is only limited by the size (number of ports) of the 10GbE network switch
Recommended Category CableCAT6A S/FTP (500 MHz) AWG 23, or CAT7 (Europe) Compliant with TIA/EIA-568B termination standard
Maximum Cable Distance up to 328 ft. (100 meters) using CAT6A S/FTP (500 MHz) AWG 23 cable
HDMI Input Cable Equalization Supports DVIGear's SHR™ Series HDMI with cable lengths up to 15 meters at 4K /30p resolution
Operational Modes (2)
Matrix Switching Mode Fully non-blocking cross-point routing of nearly any size I/O array - only limited by size of 10GbE switch.
Video Wall Mode Supports Video Wall displays using basic pixel allocation method. Consult DVIGear for further details.
Point-to-Point Mode Supports Point-to-Point Extension of signals up to 328 ft. (100 meters) using recommended cable.
Note 1: The 10GbE port is designed to connect to compatible DVIGear products and 10GbE network switches only. Do not connect any device to the 10GbE port of this product unless you are sure it is compatible.
Note 2: A system may operate concurrently in Matrix Switching and Video Wall modes.
Specifications
DisplayNet™ Zero Compromise, Infinite Possibilities9
DN-100 SeriesHDMI 10GbE Transmitter / Receiver
Specifications (Continued)
Power
Typical Power Consumption Tx unit: 12.6 watts; Rx unit: 12.7 watts
External AC Power Adapter Input: 100-240VAC, 50-60Hz / Output: +12VDC @ 2.5A
Mechanical
Construction Heavy-duty steel enclosure with jet black finish
Dimensions (H x W x D) Each Unit: 1.4" x 8.3" x 5.1" (35.1 mm x 210.2 mm x 130.3 mm)
Weight Each Unit: 2.9 lbs. (1.3 kg)
Environmental
Operating Temp. (Environment) +32° to +104° F (0° to +40° C)
Typical Case Temperature Tx Unit: 98.6° F (37° C) Rx Unit: 105.8° F (41° C)
Storage Temp. (Environment) -4° to +158° F (-20° to +70° C)
Operating / Storage Humidity 10% to 90% (non-condensing)
Regulatory Approvals
TX / RX Units FCC, CE, RoHS
External AC Power Adapter FCC, CE, UL, C-UL, CEC, GS, PSE, CCC, RoHS, WEEE
Warranty
Limited Warranty 3 Years Parts and Labor
Model Numbers
DN-100TX DisplayNet™ HDMI 10GbE Transmitter
DN-100RX DisplayNet™ HDMI 10GbE Receiver
Accessories
Included
1x External AC Power Adapter (per unit)2x Mounting Brackets with Screws (per unit)1x HDMI Gold-Plated Jack Screw (per unit)1x 3-pin RS-232 Phoenix Connector (Phoenix p.n. 1844223) (per unit)1x IR Transmitter (per DN-100TX)1x IR Receiver (per DN-100RX)1x USB Flash Drive Loaded with:
DisplayNet Hardware Manual, Software Manual, DisplayNet Manager™ Software
Optional
DisplayNet Server™ (p.n. DNS-100) (3)
External AC Power Adapter with USA, Euro, UK, or Australia Plugs (p.n. DVI-72155-PS)Power Distribution Unit, 8x 12VDC (p.n. DVI-7520-PDU)IR Transmitter (p.n. DVI-7360-IR-TX)IR Receiver (p.n. DVI-7360-IR-RX)19" Rack Mount Kit (p.n. DN-100-RMK)
DVI-I Female to HDMI Male Adapter Cable (p.n. DVI-8511b)
Note 3: The DisplayNet Server™ is recommended for optimal system configuration. Please see the DisplayNet™ DN-100 Series Hardware Manual for details on the DisplayNet Server™ specifications, installation, and use.
All specifications are subject to change without notice.
DVIGear • 1059 Triad Court, Suite 8, Marietta, GA 30062 • Tel: 770.421.6699 • Toll Free: 888.463.9927 • Fax: 770.234.4207 • [email protected] • www.dvigear.com 10
DVIGear, Inc. 1059 Triad Court, Suite 8 Marietta, Georgia 30062-2258
www.dvigear.com
Toll Free 888.463.9927 Phone +1.770.421.6699 Fax 770.234.4207
DVIGear and DVIGear & Design are trademarks of DVIGear, Inc. and may not be used without the prior written permission of DVIGear, Inc.
www.DisplayNet.com
© 2016 DVIGear, Inc.