directors chair (bar height) 111029, 111030, 111031, 111032 · warrants product against defects in...
TRANSCRIPT
11.27.13Instructions Continued On Back Side
Product Parts
2 - Dowels (A)1 - Chair Frame (B)1 - Chair Seat (C)1 - Chair Back (D)
Directors Chair (Bar Height) 111029, 111030, 111031, 111032
Chair Assembly
Step 1 Remove frame (B) from shipping box, set upright and partially extend.
Step 2 Slide dowels (A) into pockets on chair seat (C). Slide chair seat (C) into chair frame (B).
Step 3Rotate arm rests to upright position, and slide the chair back (D) onto chair frame (B).
Step 4Fully extend chair frame (B) and push down on both hinges under the seat to lock. Foot rest will stop in a flat, horizontal postition.
(A)
(B)
(C)
(D)
11.27.13
Warranty Information: All products are designed to provide the user with a cost-effective and durable product. Standard warranty is a ‘one year parts and labor’ warranty which warrants product against defects in material and workmanship. It does not cover damage due to accidents, abuse, or normal wear and tear. Products found to be defective will be replaced or repaired at factory’s discretion.
Disassembly
Care
Storage
Store in a cool, dry place, away from direct sunlight.
Wipe clean with a damp cloth.
Step 1 Lift up on both hinges under the seat to unlock and partially collapse frame.
Step 2 Slide the chair back (D) off the chair frame (B) and then slide chair seat (C) off chair frame (B). Leave the dowels (A) in the chair seat (C) pockets for quick set-up next time.
Step 3Fully collapse frame and place in shipping box for storage.