diode body inspection
DESCRIPTION
Diode body inspection. 100% in-line check 6 measurements / diode 25 diodes / second Check under two view angles. Backlight image, 180 microsec. flash duration, telecentric optics. Diode body inspection. PLC controlled Go / no-go Data logging Statistics 6 measurements - PowerPoint PPT PresentationTRANSCRIPT
2001-04-11 3
Diode body inspectionDiode body inspection
• 100% in-line check100% in-line check• 6 measurements / diode6 measurements / diode• 25 diodes / second25 diodes / second• Check under two view anglesCheck under two view angles
Backlight image, 180 microsec. flash duration, telecentric optics
2001-04-11 4
Diode body inspectionDiode body inspection
telecentric opticstelecentric optics
shieldingshielding
conveyor beltconveyor belt
flash illumination (180 µsec)flash illumination (180 µsec)
cameracamera
• PLC controlled PLC controlled • Go / no-goGo / no-go• Data loggingData logging
• StatisticsStatistics• 6 measurements6 measurements• Auto-calibrationAuto-calibration
2001-04-11 5
Inspection of CRT-connectors
• In-line inspection during manufacturing.• Inspection during continues rotation of the connector.• Stand-alone go / no-go check
2001-04-11 6ICOS Vision: inspection of IC leadsICOS Vision: inspection of IC leads
• DDual shadow vision system ual shadow vision system guarantees reliable and accurate guarantees reliable and accurate 3D measurements on all the leads.3D measurements on all the leads.
• Switching lights eliminate the need Switching lights eliminate the need for multiple sensors or motion. for multiple sensors or motion.
• Where as single projection systems Where as single projection systems only look at the side of the leads, only look at the side of the leads, the ICOS solution reconstructs a the ICOS solution reconstructs a true 3D image of the component.true 3D image of the component.
• These raw 3D data are further These raw 3D data are further analyzed to calculate reference analyzed to calculate reference planes and specific measurements planes and specific measurements such as lead coplanaritysuch as lead coplanarity
2001-04-11 8
RulerRuler
Absolute grey value
independent
Sub-pixel accurate
3 pixels / edge
edges edges
- + - + - +
2001-04-11 10
IdentificationIdentification
• Verification and testing of laser marked metal, synthetic Verification and testing of laser marked metal, synthetic materials and PCBs.materials and PCBs.
Datamatrix codeDatamatrix code
2001-04-11 11
Inspection of compound Inspection of compound immediately after immediately after dispensingdispensing
NONO NONO OKOK
Compound inspectionCompound inspectionpart of “spaarlamp”part of “spaarlamp”