Digital Film Scanner/ConverterUSER GUIDEIVAFS22

Thank you for purchasing the Ivation® Digital Film Scanner/Converter. This User Guide is intended to provide you with guidelines to ensure that operation of this product is safe and does not pose risk to the user. Any use that does not conform to the guidelines described in this User Guide may void the limited warranty.

Please read all directions before using the product and retain this guide for reference. This product is intended for household use only.

This product is covered by a limited one-year warranty. Coverage is subject to limits and exclusions. See warranty for details.

Box Contents

Digital film scanner/converter USB to mini USB cable Negative adapter TV cable Slide adapter Cleaning brush Power adapter User guide

Safety Precautions

• Do not attempt to disassemble the unit.• Do not touch the inner part of the scanner after dropping or other damage.• Stop using the scanner immediately if there is any smoke or smell during operation.• Do not clean the scanner with alcohol, gasoline, diluent, or other organic solvent.• Do not use the scanner in a dusty or damp environment.• Use only standard size film with this scanner.• Make sure the scanner is clean before operation.• This unit will automatically shut off after 30 minutes without continuous operation.

Loading the Slide and Negative Adapters

1. Hold the negative or slide towards the light and face the front upwards.2. Select the correct adapter depending on whether you are scanning a negative or slide. Both adapters

are labeled.3. Flip the adapter onto the side that reads “THIS SIDE UP.” Open the adapter and place the slide or

negative inside. 4. Close the adapter and press the edges so that it snaps into place.5. Insert the adapter into the slot on the bottom of the scanner, noting the arrow indicating the top side.

Navigating the menu

1. Film type 5. Format 2. Resolution 6. USB MSDC 3. Capture 7. Language 4. Playback

Operation

1. Press and hold the power button to turn the unit on or off.2. The scanner will automatically shut off after 30 minutes without continuous operation.

Selecting Film Type

1. In the main menu, select the Film Type option. 2. Cycle through the options with the directional buttons and press the OK button to select the film type.

OK

FS630N Software flow chart-V1.0 20170315 P2-2

Note：1.The default 135 negatives2.Press the left and right buttons to select different negatives4.Select Film, Press OK to enter the preview mode5.Press the menu button to return to the previous menu

OK

OK Choose film

Left/Right Left/Right

preview mode

OK OK

Left/Right

Capturing an Image

1. Press the scan/menu button. If scanning a specific type of negative or slide, cycle through the options with the directional buttons and press the OK button to select Film Type. After selecting the film type, the scanner will automatically enter Capture mode.

2. For a non-specified film type, cycle through the options with the directional buttons and press the OK button to select Capture to enter capture mode. The photo will be scanned and an image will appear on the screen.

3. To flip the image horizontally, press the left directional button.4. To flip the image vertically, press the right directional button.5. To set the exposure compensation, press the OK button. Use the directional buttons to adjust each

value and confirm by pressing the OK button.

6. To save the image, press the scan/menu button and select the save icon by pressing the OK button.

Playing Back an Image

1. In the main menu, select the Playback option. The saved images will automatically play. 2. Press the OK button to pause the automatic playback and use the directional buttons to cycle through

images manually. 3. To return to automatic playback, press the OK button again and select Exit. In this menu you may also

delete the image or return to the main menu.

Selecting the Resolution

1. In the main menu, select the Resolution option.2. Use the directional buttons to select either 14M or 22M (interpolation). Confirm by pressing the

OK button.

Formatting the SD Card

1. In the main menu, select the Format option. 2. Note that when formatting, all data currently saved will be deleted.3. Confirm by using the directional buttons to highlight Yes and press the OK button to confirm.

Language Settings

1. To change the language, select the Language option in the main menu. 2. Use the directional buttons to cycle through the language options. 3. Select the desired language by pressing the OK button.

Available languages: English, French, German, Italian, Spanish, Traditional Chinese, Simplified Chinese, Japanese

Connecting to a Computer

1. Use the included USB cable to connect the scanner to the computer.2. In the main menu, select the USB MSDC option.3. After successfully connecting to the computer, you will be able to view and edit the captured images.

Care and Maintenance

• Handle film with care and avoid scratches or fingerprints. For best results, wear cotton gloves while handling film.

• Clean the film by gently wiping with compressed cotton.

Specifications

USB interface: USB 2.0Image sensor: 14MP CMOS sensorBuilt-in display: Color 2.4” TFT LCDExposure control: automatic/manual (-2.0EV~ +2.0EV)White balance: automatic:Resolution: 14.0MP/22MP (interpolation)Supported film types: 135 film (36x24mm) 126KPK film (27x27mm) 110 film (17x13mm) Super8 film (4.01x5.79mm) Monochrome (slide)Picture effects: B&W, slides, negativesFile format: picture/JPEGTV-OUT type: NTSC/PALBuilt-in memory: 128MExternal memory card: SD card up to 32GBPower supply: DC 5V adapter / USB portSupported language: S-Chinese / TZ-Chinese / English / French / German / Italian / Spanish / JapaneseSupported OS: Windows XP / Vista / Windows 7/8 / Mac10.7.3 and aboveDimensions: 3.4” x 3.4” x 4”Weight: 8.8 oz. (250g)

Customer Serviceinfo@myivation.com866-849-3049