Slide 1

Digital CounterTraining Videos & Instructions

1Contents:Digital Counter ComponentsStep 1: How to assemble the Digital CounterStep 2: How to attach the Bouncepad Flex to the digital counterStep 3: How to attach the iPad Cable to the Bouncepad FlexStep 4: How to lock iPad into the Bouncepad Flex Step 5: How to attach the graphics to the Digital CounterFully assembled Digital CounterHow to pack up the Digital Counter

Digital Counter Components: The Digital Counter is comprised of two shipping cases which include the following components:

Shipment Case 1 includes:Counter Base (A)Loop nylon wrap (B)Thermoformed Top (C)UK & Europe extension leadsWiley graphic wrap

Shipment Case 2 includes:Bouncepad FlexiPad Cable & PlugKeys

Step 1: How to assemble the Digital CounterTo attach the Tamber Wrap, place the base on the floor with the hook side facing upwards.

Then simply locate the wrap in the centre of one side and begin to attach the wrap. Continue to attach the wrap around the base until fully attached.

123.Once the wrap is fully attached make sure that the wrap is butted up against each other to make a seamless join.

4.To attach the top simply lower the top into place and make sure that the hook and loop is attached all the way around.

34Step 1: How to assemble the Digital Counter

Step 2: How to attach the Bouncepad Flex to the Digital Counter

To attach the Bouncepad it is easier to have the top in place and open the back of the velcro with a small opening. Place the Bouncepad on the counter top.

12Align with the holes on the top of the counter and feed through the holes on the counter top.

Place the metal plate underneath the counter over the screws.

5.Attach the four wingnuts securely to the plate.

35Step 2: How to attach the Bouncepad Flex to the Digital Counter

4Step 3: How to attach the iPad Cable to the Bouncepad Flex

Feed the iPad cable through the flexible mounting arm from above.Straighten the flexible mounting arm to help the cable slide through more easily. Connect the cable to the plug/extension cable inside the Digital Counter.

123Step 4: How to lock the iPad into the Bouncepad Flex

Unlock and remove the face of secure case.Connect cable to tablet and place into secure case.Lock the face of the secure case back into place, then place the cable end of the faceplate first, then squeeze the lock end while turning the key.

2

31This video clip will demonstrate how to lock your tablet into the Bouncepad Flex, simply click on the image below:

10Step 5: How to attach the graphics to the Digital CounterPlace the vinyl graphic over the velcro and simply locate the wrap in the centre of one side and begin to attach the wrap. Continue to attach the wrap around the base until fully attached. The feet are raised enough so you can have an extension lead cable underneath the unit.

12

Fully Assembled Digital Counter:The Digital counter can be configured as follows:

1 x Bouncepad Flex with Laptop or Lenovo (if content interactive is being used)

2.2 x Bouncepad Flex

Please ensure you book the appropriate tech equipment through your Exhibits contact.

This video clip will demonstrate how to remove the iPad from the Bouncepad Flex, simply click on the image below:

13Step 5: How to attach the graphics to the Digital CounterPlace the vinyl graphic over the velcro and simply locate the wrap in the centre of one side and begin to attach the wrap. Continue to attach the wrap around the base until fully attached. The feet are raised enough so you can have an extension lead cable underneath the unit.

12

How to Pack the Digital Counter: