die passiv-aktivisten
TRANSCRIPT
Ventilation unit
ApplicationThe CLIMOS 200 comfort ventilation unit was specially developed for use in demanding residential and commercial buildings. It guarantees comfort ventilation paired with user-friendly operation and the highest energy efficiency. The various installation options and different models allow it to be flexibly incorporated into building services. The comfort ventilation unit moves a maximum of 200 m³/h at an external pressure of 150 Pa.
Level of efficiencyThe CLIMOS 200 series comfort ventilation unit is equipped with a cross-counterflow enthalpy exchanger with humidity recovery and achieves a heat output of 84% as certified for humidity-transferring ventilation units according to passive house regulations. For user comfort this means: no unpleasant draft effects because the supply air is heated almost to room temperature, even at temperatures around freezing.
FansThe quiet, particularly energy-efficient EC radial fans with integrated controllers can be adjusted to the required air flow in 1% increments and are also regulated to a constant volume. The air volumes of the selectable speeds for the CLIMOS 200 are between 50 and 200 m³/h at an external pressure of 150 Pa.
FilterThe CLIMOS 200 series comfort ventilation unit is equipped with a Class M5 filter. An optional F7 pollen filter is available for outside air.
InstallationThe CLIMOS 200 comfort ventilation unit is characterised by its flat, compact design and is therefore ideal for ceiling installation. An optional custom-fitted access panel for dry-wall installation is available for installation in suspended ceilings. No condensate connection is required, which allows for flexible installation options on the wall, roof slope or at floor level. The CLIMOS 200 is thus predestined for use in modernisations but also suited for use in confined or complicated spaces in new builds. Both left-hand and right-hand supply versions are available to optimise the routing of the ventilation tubes to the ventilation unit.
OperationThe comfort ventilation unit is controlled using a control unit commonly located in living areas. The standard model of the CLIMOS 200 comfort ventilation unit is controlled by the high-quality TFT RD with touchscreen. The text- and icon-based menu navigation on the colour display facilitates user-friendly operation. The optional customised LED RD control panel allows the CLIMOS 200 to be operated using seven preset fan speeds and modes for "supply air only" and "extract air only".
MaintenanceMaintenance on the CLIMOS 200 comfort ventilation unit is limited to regular replacement of the integrated filter. Direct access to the EPP filter grilles on the housing cover facilitate easy filter replacement. The heat exchanger should be inspected for dust and dirt every two years and cleaned as necessary. This can be done by simply removing the housing cover, pulling the holding clamps out of the comfort ventilation unit, and cleaning the heat exchanger with lukewarm, soapy water. Please refer to the user manual for additional maintenance tips and tasks.
CLIMOS 200
TS142 - 1
CLIMOS 200
Die Passiv-Aktivisten
TFT control panel
LED RD control panel
Ventilation unit
Frost protectionThe CLIMOS 200 comfort ventilation unit is equipped with automatic frost protection, which prevents the heat exchanger from freezing should the outside air temperature drop to a very low level. The frost protection setting switches off the fans if the temperature falls below the temperature limit specified for frost protection mode and the unit type. In order to ensure reliable operation even at extreme outside temperatures, an optional, integrated electric pre-heater is available.
Summer ventilationAn electronic bypass function can be used for summer ventilation so that, for instance, cooler outside air can be directed into the living areas via "free cooling". Extract air is deactivated during the active phase of the electronic bypass function in order to prevent the transfer of heat and humidity.
Options
• Electric pre-heaterAn electric pre-heater also guarantees safe, continuous, frost-free operationeven at temperatures below freezing.
• Pollen filterA Class F7 pollen filter protects the room air from pollen and reduces theparticulate-matter, spores and germ load.
CLIMOS 200
TS142 - 2
Die Passiv-Aktivisten
Ventilation unit
Benefits• Comfort ventilation up to 200 m³/h• Passive house–certified heat output of 84%• Fans with constant volume flow control and balancing• Frost protection function: Efficient even at low temperatures• No condensate connection required• Integrated output-modulating pre-heater (optional)• EPP interior lining with excellent thermal- and acoustic-insulation properties• Universal installation options• Fast, safe installation and maintenance• Intelligent, user-friendly control unit• Filter replacement indicator• Time- or sensor-controlled automatic functions• Interface for analogue and digital I/O signals• Electrical and hot water reheater integration possible
Article numbersL/R = left-hand/right-hand supply air, V = pre-heater
Article no.527 003 240
527 003 250
527 003 260
DescriptionClimos 200 L enthalpy
Climos 200 R enthalpy
Climos 200 VL enthalpy
Climos 200 VR enthalpy 527 003 270
All models exclusive of control panel.
521 014 130
521 014 140
528 007 870
AccessoriesLED RD control panel
TFT RD control panel with colour touch panelSet designer filter cover, colour RAL 3020
Mounting base 527 002 280
527 004 270
FilterFilter set for Climos 200 M5 (content 2 pieces)
Filter set for Climos 200 M5 / F7 (content 2 pieces) 527 004 280
CLIMOS 200
TS142 - 3
Die Passiv-Aktivisten
Ventilation unit
Tender specifications CLIMOS 200 comfort ventilation unit with maximum air volume of 200 m³/h at 150 Pa; B x H x T (mm): 999 x 250 x 594; housing made of galvanised, powder-coated sheet steel, RAL 7016 anthracite; interior lining made of high-quality EPP; with cross-counterflow enthalpy exchanger, with humidity recovery, passive house–certified heat output of 84%; EC radial fans with integrated controller regulated to a constant volume, adjustable in 1% increments; optional integrated pre-heater; Class M5 outside and extract air filters, optional F7 pollen filter; left- and right-hand design; installation positions suspended from the ceiling or lying (horizontal), mounted on the wall (horizontal or vertical), and on the wall slope (horizontal or vertical); communication interface for analogue and digital I/O signals, reheater and ground source heat exchanger flap with additional module.
Air directionsThe figures on the right show the air directions (front view).
Technical specification
DimensionsHeight (mm) 250
Width (mm) 999
Depth (mm) 594
Specification
Plastic / membrane polymer Cross-counterflow enthalpy exchanger with humidity recoveryInterior lining material Heat output according to PHI
Weight
Expanded polypropylene (EPP)
84 %
25 kg
CLIMOS 200
TS142 - 4
Die Passiv-Aktivisten
Design: supply air- left (L)
Design: supply air- right (R)
Extract air
Exhaust airSupply air
Outside air
Extract air
Exhaust air Supply air
Outside air
250
594
636
373
100
125 123 7001019
Ø155
Ventilation unit
Dimensional drawing
CLIMOS 200
TS142 - 5
Die Passiv-Aktivisten
Ventilation unit
Certificates • Passive house certificate
Equipment
Equipment Climos 200 L enthalpy
Climos VL enthalpy
x
x x
x x
x x
x x
x x
Pre-heater
Enthalpy exchanger
Left-hand/right-hand design
DN 125 connector
Ready to plug in
TFT RD control panel
LED RD control panel x
Function
Functions with TFT RD control panel• Standby (darkened display), power consumption < 1 W• Fan speeds 1 – 3 (programmable in 1% increments)• Away mode (interval-controlled fan speed 1)• Intermittent ventilation (duration between 15 and 120 min, individually adjustable)• Time-controlled automatic operation (individually programmable weekly
time programme in 15-min increments for each weekday)• Automatic sensors, optional with external sensors (CO2, humidity, air quality)• Menu (access to Information, Settings and Setup menus)• Context-sensitive help text• Password-protected, lockable control panel for inactive display interface
Indicators with TFT RD control panel• Text- and icon-based menu navigation• Filter replacement indicator (remaining filter life in days)• Fault notification with notification icon• Clear text fault indicator in menu information
Functions with LED RD control panel• Standby (fan speeds not indicated by LED), power consumption < 1 W• Fan speeds 1 to 7 (fixed settings)• Intermittent ventilation (duration 15 min, speed 7, fixed setting)• "Supply air only" and "extract air only" modes (for cooling in summer)• Reset for filter replacement
Indicators with LED RD control panel• Filter replacement indicator (LED indicator over filter replacement reset button)• Fault notification using LED codes
CLIMOS 200
TS142 - 6
Die Passiv-Aktivisten
Ventilation unit CLIMOS 200
TS142 - 7
Die Passiv-Aktivisten
Sound, supply air/exhaust airSound power at the supply air connection at a distance of 0 mSpeed level Air volume Qv Pressure ΔP st
m3/h Pa 63 HzdB
125 HzdB
250 HzdB
500 HzdB
1000 HzdB
2000 HzdB
4000 HzdB
8000 HzdB
SumdB(A)
45% 100 100 46,9 62,2 60,3 59,6 58,7 51,9 47,3 40,5 66,0
67% 138 100 48,6 61,4 61,3 59,6 60,3 53,6 49,1 43,0 66,6
72% 150 100 47,7 62,0 62,0 60,0 61,1 54,5 50,5 43,8 67,3
100% 200 100 49,6 63,2 65,3 62,7 63,6 58,6 53,7 48,4 70,0
Sound, extract airSound power at the return air connection at a distance of 0 mSpeed level Air volume Qv Pressure ΔP st
m3/h Pa 63 Hz 125 Hz 250 Hz 500 Hz 1000 Hz 2000 Hz 4000 Hz 8000 Hz dB(A)45% 100 100 39,9 52,1 53,4 43,5 33,1 22,5 19,4 15,3 55,6
67% 138 100 43,0 54,3 55,7 45,5 35,5 25,2 20,0 15,3 57,8
72% 150 100 44,4 54,6 56,2 46,0 36,7 25,8 19,5 15,3 58,2
100% 200 100 49,2 58,1 59,3 48,4 40,2 29,4 23,4 15,4 61,2
Sound, unit emission sound power at unit at a distance of 0 mSpeed level Air volume Qv Pressure ΔP st
m3/h Pa 63 Hz 125 Hz 250 Hz 500 Hz 1000 Hz 2000 Hz 4000 Hz 8000 Hz dB(A)45% 100 100 33,1 41,7 47,7 49,6 51,9 52,4 37,5 29,5 57
67% 138 100 36,1 43,8 50,7 51,5 53,7 52,4 40,6 31,2 68,5
72% 150 100 34,4 44,6 50,6 52,3 54,1 52,4 41,1 31,3 58,8
100% 200 100 37,7 49,4 55,8 58,3 59,5 52,4 47,0 35,7 63,5
Ventilation unit CLIMOS 200
Die Passiv-Aktivisten
Technical specifications
Speed Air volume Pressure PowerconsumptionQv P st
m3/h Pa W
21 55 50 19
40 80 50 25
45 100 50 28
56 120 50 34
68 140 50 38
79 160 50 46
45 100 100 40
56 120 100 45
68 140 100 5179 160 100 57
98 195 100 74
68 140 150 70
79 160 150 75
Air volume (m /h)
Ext
erna
l pre
ssur
e (P
a)
66
73
74
85
90
84
60
15
19 25 28
40
34
45
38
51
70
46
57
76
00
50
100
150
200
250
300
350
50 100
Application
150 200
TS142 - 8
Switch setting, factory setting (speed level) CLIMOS 200(1)
(2)
(3)
(4)
(5)
(6)
(1)
(2)
(3)
(4)
(5)
(1)
(2)
CD
E-F
LYE
RTS
142,
V09
14, G
BR
, en,
sub
ject
to c
hang
e w
ithou
t not
ice
Zehnder Group Deutschland GmbH · International Sales · Almweg 34 · 77933 Lahr · Germany T +49 7821 586-392 · F +49 7821 586-406 [email protected] · www.international.zehnder-systems.com