dial test indicators - docs.rs-online.com · 513-402 dial test indicator 7014 mini magnetic stand...
TRANSCRIPT
Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.Therefore the company reserves the right to change any or all aspects of any product specification without notice.
F-45
F
Dial Test IndicatorsSERIES 513 – Horizontal Dial Test Indicator
• Provides easy access to shrouded surfaces that cannot be reached with conventional dial indicators.• No-clutch structure for automatic reversal of measuring direction.• Resistant to water and dust thanks to the one piece bezel and O-ring seal for the crystal.• The glare-free flat crystal face has a scratch resistant coating.
• High sensitivity and quick response due to low- friction jewelled bearings.
513-474E:• Ruby contact point model.• Higher resistance to wear.• Non-magnetic, non-conductive tip allows use in EDM processes.
FEATURESMetric
Code No.
513-424E 4 4 — 4 —513-414E 4 4 4 4 —513-404E 4 — — 4 —513-474E 4 — — 4 —513-415E 4 — 4 4 —513-426E 4 4 — 4 4
513-405E 4 — — 4 —513-425E 4 — — 4 4
513-401E 4 — — 4 —
Inch
Code No.
513-402 4 — — 4 —513-412 4 — 4 4 —513-403 4 — — 4 —
Metric/inch
Code No.
513-409T 4 — — 4 —
Inch/metric
Code No.
513-406T 4 — — 4 —
513-474E 513-415E
513-404E513-424E 513-414£
513-425E513-405E 513-401E
Special Sets:513-908: Metric set, consisting of: 513-404E Dial test indicator 7014 Mini magnetic stand £126.00513-907: Inch set, consisting of: 513-402 Dial test indicator 7014 Mini magnetic stand £126.00
Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.Therefore the company reserves the right to change any or all aspects of any product specification without notice.
F-46
F
SPECIFICATIONSMetric
Code No. Graduation Range Accuracy Scale Measuring force PriceBasic Set513-424E 0.01 mm 0.5 mm 5 µm 0-25-0 0.3 N or less £80.90513-414E 0.01 mm 0.5 mm 10 µm 0-25-0 0.2 N or less £82.10513-404E 0.01 mm 0.8 mm 8 µm 0-40-0 0.3 N or less £72.30513-474E* 0.01 mm 0.8 mm 8 µm 0-40-0 0.3 N or less £83.80513-415E 0.01 mm 1 mm 10 µm 0-50-0 0.2 N or less £89.20513-426E 0.01 mm 1.5 mm 8 µm 0-25-0 0.4 N or less £83.30513-405E 0.002 mm 0.2 mm 3 µm 0-100-0 0.3 N or less £87.80513-425E 0.002 mm 0.6 mm 6 µm 0-100-0 0.4 N or less £102.00513-401E 0.001 mm 0.14 mm 3 µm 0-70-0 0.3 N or less £87.80Full Set513-424T 0.01 mm 0.5 mm 5 µm 0-25-0 0.3 N or less £99.70513-414T 0.01 mm 0.5 mm 10 µm 0-25-0 0.2 N or less £116.00513-404T 0.01 mm 0.8 mm 8 µm 0-40-0 0.3 N or less £87.50513-415T 0.01 mm 1 mm 10 µm 0-50-0 0.2 N or less £108.00513-405T 0.002 mm 0.2 mm 3 µm 0-100-0 0.3 N or less £106.00
Inch
Code No. Graduation Range Accuracy Scale Measuring force PriceBasic Set513-402 .0005" .03" ±.0005" 0-15-0 0.3 N or less £72.00513-412 .0005" .03" ±.0005" 0-15-0 0.2 N or less £104.00513-403 .0001" .008" ±.0001" 0-4-0 0.3 N or less £94.00Full Set513-402T .0005" .03" ±.0005" 0-15-0 0.3 N or less £102.00513-412T .0005" .03" ±.0005" 0-15-0 0.2 N or less £125.00513-403T .0001" .008" ±.0001" 0-4-0 0.3 N or less £125.00
Metric/inch
Code No. Graduation Range Accuracy Scale Measuring force PriceFull Set513-409T 0.002 mm / .0001" 0.2 mm / .0075" 3 µm 0-10-0 / 0-3.8-0 0.3 N or less £115.00
Inch/metric
Code No. Graduation Range Accuracy Scale Measuring force PriceFull Set513-406T .0005" / 0.01 mm .03" / 0.7 mm ±.0005" 0-15-0 / 0-35-0 0.3 N or less £108.00
* Provided with a ø2 mm ruby contact point as a substitute for ø2 mm carbide contact point.
1725
øD
0.8
8.3
15.541
L 37
DIMENSIONS
Unit: mm
Set Configuration: Metric and Metric/Inch
Full set
Basic set
Set Configuration: Inch and Inch/Metric
Full set
Basic set
Stylus, ø2 mm contact point (carbide)
Indicator
Knurled clamp ring Stem, ø8 mm
Stylus, ø1 mm carbide point
Stylus, ø3 mm carbide point
Stem, ø4 mm
Swivel clamp(900321, for ø4 mm, ø8 mm, dovetail)
Metric holding bar (L: 100 mm)
Stylus, ø.079" contact point (carbide)
Indicator
Knurled clamp ring Stem,
ø3/8".
Stylus, ø.039" carbide point
Stylus, ø.118" carbide point
Stem, ø.157"
Swivel clamp (900322, for ø.157", ø3/8", dovetail)
Inch holding bar (L: 4")
Code No. L D513-424E 22.3 ø40513-404E 20.9 ø40513-474E 20.9 ø40513-415E 44.5 ø40513-426E 22.3 ø40513-405E 14.7 ø40513-425E 14.7 ø40513-401E 12.8 ø40513-414E 36.8 ø40513-409 14.7 ø40