16

DIAGNOSTIC & TEST EQUIPMENT Hydraulic Transmission Tester

Test the transmission with fluid under pressure, the Hydraulic Tester simulates operating conditions in the unit and finds problems instantly. The Hydraulic Tester finds hidden defects in soft parts or can alert you to hard parts that have grown out of tolerance. A simple hook up to a unit test plate and the reading of a single gauge allows you to test a transmission in or out of the vehicle

Part No. TOOL.139

Unit Test Plates available for many transmissions See individual sections for part numbers.

Spare Parts For Use Wiith TOOL139

Spare Gauge AssemblyPart No. TOOL.145Spare Nipple for test plates

Part No. TOOL.147Rubber Adaptor for Pistol

Part No. TOOL.170Leaver Release Valve

Part No. TOOL.171

Transmission Filling Tool

Part No. TOOL.201

It is becoming far less common for transmissions to be provided with filler tubes and dipsticks, most recent units have to be filled via a filler / level bung in the sump pan. Finding methods to force fluid into the transmission in this way can be messy and time consuming, this tool has been specifically designed to make the job easier and cleaner. The tool consists of a 10 litre fluid pump and a set of 10 adaptors, the pump and adaptors are also available separately, so if you need to extend the usefulness of the tool by adding extra pumps or adaptors this can easily be done.

Adaptors: Audi/VW 01M Etc. Part No. TOOL.205Audi/VW DSG (02E) Part No. TOOL.206Audi/VW 01J (Multitronic) Part No. TOOL.207BMW CVT Part No. TOOL.208Ford/Jaguar 5R55N/W Part No. TOOL.209Mercedes 722.9 Part No. TOOL.210Opel/Vauxhall 4L30E Part No. TOOL.211Opel/Vauxhall/Volvo AW 6 Speed Part No. TOOL.212Renault DP0 Part No. TOOL.213Renault DP0-2 Part No. TOOL.214Toyota Landcruiser A750 Part No. TOOL.218Alfa Romeo AF40 Part No. TOOL.219

Pumps:Pump Assembly 5ltr Part No. TOOL.202Pump Assembly 10ltr Part No. TOOL.203

Accessories for Transmission Filling Tool

17

DIAGNOSTIC & TEST EQUIPMENT G-TEC Cooler Flusher

This Heated Cooler Line Flusher, cleans out the cooler lines and heat exchanger prior to installing a rebuilt or new transmission; a process which has been proven to minimize the likelihood of repeat repairs. This special tool removes contamination in the cooling system by melting down waxy varnish residue from burnt ATF and by purging the metal particles, clutch materials, and other contaminants from the system. Only by heating the cooling system back to high temperatures will the exchanger expand releasing the debris into the flow of pulsating hot oil.

The 7AR Flusher comes with an air injection which allows the user to shoot air through the lines before flushing to blow out debris. Most importantly, sending a continuous blast of scrubbing air bubbles through the lines during flushing will help clean the system faster, saving labor time. According to tests conducted by the American Honda Tool division, using the air injection reduced flushing time by as much as 75%. Finally, the air injection can be used to clear and dry out the lines after flushing.

The 7AR also comes with a reverse valve eliminating the need to turn off the flusher and manually switch the hoses to reverse the flow of the hot oil while flushing.

The 7AR features a motor shield which also serves as a hose guide and a deeper tool tray to hold all the adapters that come with the 7AR.

The 7AR features include:• 10 gallon all-steel low profile tank powder coated for durability• Auto-controlled 1500 Watt internal tank heater keeps the fluid at the optimum temperature to clean the cooling

system while conserving energy• 1 inch gauge for monitoring the temperature of the fluid in the flusher's tank• The low fluid safety (float) switch prevents damage to the heater by cutting power to the heater when the fluid

level in the tank drops too low- illuminating a red warning light on the electrical box• Sealed heavy duty switches with green indicator lights• 1750 ppm (pulses per minute) pulsating pump with a pressure relief valve and a commercial-grade motor with a

1/2 hp service factor• 10 inch semi-pneumatic rubber tires for easy mobility• Two absorption filters: one magnetic bypass spin on filter and one magnetic non-bypass spin on filter • 1 inch drain plug allows quick and easy cleaning of tank• Motor shield reduces noise and tool tray holds adapters• Two rubber grommets for the hoses to pass through thus preventing damage from vibration• Hydraulic purge valve prolongs the life of the filters and fluid (meets OSHA requirements)• Two 8 foot hoses with quick disconnect couplings• 5 gpm flowmeter shows any system blockages or restrictions• Longer handle for easy mobility• Air injection system• Reversing valve Part No. TOOL.177

Spin-On Filter With By-Pass for G-TEC Flusher Part No. TOOL.190Spin-On Filter Non By-Pass for G-TEC Flusher Part No. TOOL.191

18

DIAGNOSTIC & TEST EQUIPMENT

Cooler Flusher adaptor for Banjo Fittings

Part No. TOOL.48

Adaptor for Banjo fittings, converting them to a standard type fitting to facilitate easy flushing of cooling systems

Life® Transmission Flush Fitting Kit

Part No. TOOL.54

Life Automotive Products has just made your job a lot easier with this complete cooler line fittings kit. No more searching the tool box for the right adapter or guessing if the fitting is the right size. All the fittings in our kit adapt to the 5/16 fitting on our TRANS FLUSH can and allows you to adapt to almost every cooler line fitting size. This complete fittings kit includes: 8 fittings, 2 hoses & 2 clamps.

• Adapts to 80% of cooler line fitting sizes.• Comes complete with 8 fittings, 2 hoses & clamps.• Simply connects to Trans Flush #2001.

Designed for ease of operation, the FluidPRO is technologicallyadvanced with:• Fully automatic operation• Precision fluid measurement to minimise technician input• Electronic keypad• Digital weight scale technology for accurate fluid exchange More>>• Logical intuitive command functions• Transmission pressure diagnostics • Patented by pass circuit for vehicle protection if power is interrupted

Fluid Exchanger, With European Adaptors

Part No. TOOL.ATX

SonnaFlow® diagnostic kit This tool measures cooler flow in gallons per minute

Part No. TOOL.20

Sonnax offers the SonnaFlow®diagnostic tool for measuring ATF cooler flow rates. The SonnaFlow tool kit includes a meter with large display numbers and a low-flow warning light,technical manual, a starter kit of fittings, a detachable power cord and 12-foot insulated signal cable, and durable electrical connectors. This tool measures ATF flow in gallons per minute, and can be connected to a lab scope or used with a dynamometer. It can be installed in any vehicle, whether the cooler return line is made of rubber or metal (metal return lines require a separate adapter). The power cord connects to the cigarette adapter or can be modified for direct connection to the fuse box or to the battery. This diagnostic tool provides a reliable and accurate way to detect flow-related transmission problems. The SonnaFlow can even measure ATF flow during vehicle road tests.

Click here for demonstration video

Adaptor Kit for Aisin Warner: Part No. TOOL.221Adaptor Kit for DSG Units: Part No. TOOL.222

19

DIAGNOSTIC & TEST EQUIPMENT Glycol Contamination Test Kit (25 Tests)

Part No. TOOL.140

This very popular kit is essential for testing modern synthetic transmission fluids to find out if they are suffering from Glycol contamination.This contamination causes eventual failure of the friction materials, with no way to carry out a visual check and as little as 1% Glycol in the transmission fluid being a critical level, this kit can save you countless costly comebacks.

Carries out up to 25 Separate Tests.

VB-LUTION Valve body vacuum test stationA revolutionary way to visibly test you valve bodies

Part No. TOOL.154

• Test for bore wear• Test regulating valves for wear• Test shift valves for wear• Test servo valves for wear• Test for bore plug wear• Test normally closed solenoids• Immediate results• Easy to use• Identify faults without disassembly of valve body

Valve Body Vacumn Tester

Part No. TOOL.161

Spare Vacumn Connector

Part No. TOOL.163

A simple and effective way to check for valve body bore wearThis bench top tool is easy to operate and comes with full user instructions and a simple guidance chart to follow. This is the starting point for collecting precise data for future reference. Simply adjust the supply vacuum and record the drop off caused by worn or ill fitting valves.

This is a must have tool for any transmission shop wishing to restore their valve bodies back to original specification.

Vacuum Adapter Kit for TOOL.154

Part No. TOOL.178

SMART BLEND Life Strips Transmission Temperature Recorders

Temperature strips that lock on & record the highest temperature a transmission reaches (190° to 270°), even after cool down. Life Strips simply attach to the pan,and you can read the temperature without raising the vehicle. This makes it easyto diagnose temperature related problems. It’s simple, fast and it works.Download Product Sheet

Our Part No. TEMP.STRIP

20

DIAGNOSTIC & TEST EQUIPMENT

Pressure Gauge Set3 Guages & 21 Adaptors

Part No. TOOL.96

Pressure GaugeRange 0 - 300psi

Part No. TOOL.123

Professional Quality Gauge, essential equipment when diagnosing transmission problems.

Professional Quality Gauge's, compleat with a comprehensive range of adaptors to suit most units.

Essential equipment when diagnosing transmission problems.

Transmission Leak Tester

Part No. TOOL.162

Stop those irritating and costly external leaks before your unit is fitted into the car by using a simple method of “Air decay”.Simply feed a regulated low pressure air supply into the transmission and torque converter, normally via the breather. Seal all open areas using either the original part or alternatively a suitable bung. When the unit reaches pressure close off the tap and wait to see if the gauge decreases, even the smallest leaks show up very quickly.

!!! Simple BUT Very Effective!!!

Anti-Static Wrist Strap

Prevent static blow-outs!

• Helps prevent electrostatic charge building up when handling Mechatronic valve bodies and other devices prone to electrostatic damage.

• Conductive Pad presses against the skin allowing the charge to leak away to earth.

• Adjustable to ensure a comfortable fit.

Part No. TOOL.215

21

DIAGNOSTIC & TEST EQUIPMENT Launch X-431 CRecorder II

The C Recorder II is a mobile data recorder for Diesel and Petrol vehicles using the OBD II and EOBD systems. Collecting real-time engine information such as ignition timing, engine speed, fuel trim and diagnostic trouble codes (DTCs), the CRecorder II then transfers the information to your PC via a USB cable so it can be analysed for further diagnostics.Works with all vehicles compliant with EOBD/OBDII (petrol vehicles from 2001 and diesels from 2004).The CRecorder II can record continuously for up to 24 hours, so you

can save and store live data streams, trouble codes and several test drive files for analysis at a later stage.

Due to its ability to record up to 24 hours of data, this type of diagnostic tool is ideal for diagnosing intermittent faults which, as many of us are aware, tend to disappear when a technician is present.

Features and specifications of the CRecorder II include:•Online software updates•Records OBD II data stream and trouble codes stored in the ECM•Covers all OBD II compliant vehicles, including CAN•Data sampling rate: 2s•Recording time: 24h

A powerful and important tool, the CRecorder II by Launch is the ultimate accessory for the busy workshop and enthusiast alike.

Supply and Support in the UK only Part No. X431.CR01Launch CReader VI

The CReader VI is the latest vehicle fault diagnosis tool in Launch’s line of handheld diagnostic tools aimed at DIY enthusiasts. Small, compact and effective, the CReader 6 combines a new ergonomic design with other functions to make it the most user-friendly model yet.

Works with all vehicles compliant with EOBD/OBDII (petrol vehicles from 2001 and diesels from 2004).As well as a new design the CReader VI boasts a full colour LCD display screen and personalised function menu. Designed to diagnose OBD and EOBD vehicles in whole functions with LED diagnostic status indicators and multi-language selections, the CReader VI will help you diagnose the vehicle quickly and accurately, making it the

perfect tool for all professional workshops and DIY enthusiasts.The easy to read colour screen can display up to 4 data graphs at the same time and the fast refresh rate of 2 frames/sec means that no problem will go unnoticed. The ability to record and playback hours of diagnostic data gives the CReader 6 a unique advantage over competitors. This function allows you to re-asses diagnostic data again and again even when the vehicle is not present.The I/M readiness test shows whether the various emissions-related systems on the vehicle are operating properly and are ready for Inspection and maintenance testing.The Launch CReader VI also reports the saved values of various engine components when the fault was flagged. This gives you another route to help diagnose issues.

Supply and Support in the UK only Part No. X431.CR02

22

DIAGNOSTIC & TEST EQUIPMENT

LAUNCH X431 PRO DIAGNOSTIC TABLET

Supply and Support in the UK only

This tablet-style car malfunction diagnostics device has been based on and specifically designed for An-droid operating systems, allowing users to download any Android software and work with a familiar user interface. The X431 Pro has been designed with internet connectivity in mind, using Bluetooth communi-cation to connect with the DBScar connector and a mobile terminal.

As with all Launch diagnostic tools, the X431 Pro covers a wide range of car models including European, Asian, American and Chinese models. It also has a range of powerful test functions and provides ex-tremely accurate test data.

Other features of this tool include:

• High configuration software that allows for high operating speeds• A multi-touch, tablet-style capacitor screen for quick, smooth use• Portable size makes it easy to use and transport• Brand new interface that’s much more user friendly• Users can install any Android software• Also has photo, video and multimedia functions, as well as other software applications• Quick and easy updating procedure, over Wi-Fi• Can graph live data when in use• Module coding, resets, relearns and bi-directional capabilities also possible

Launch X431 Pro Technical Specifications:

• Operating System: Android• CPU: Dual Core 1GHz• Battery: 3000mh rechargeable polymer lithium battery• Standby Time: Approx 4 hours (subject to use)• Memory: 512MB• Extension Memory Card: 32G Micro SD(TF) card Supported• Storage Capacity: 2GB• LCD Screen: 7.0 inch• LCD Resolution: 1024 x 600• Touch Screen: Five point capacitive touch screen• Cameras: 2MP rear and 0.3MP front• Wi-Fi: Enabled• Bluetooth: Enabled

Our Part No: X431.COMP07

23

DIAGNOSTIC & TEST EQUIPMENT

LAUNCH X431 PRO III DIAGNOSTIC TABLET

Based on the Android operating system, the X431 Pro III is the latest diagnostic tool from Launch. With remote diagnostic features and a built-in social network, this tool encom-passes the best in Launch technology and tablet computer usability.

Encorporating the best in already existing Launch diagnostic tools, the Pro 3 can read and clear DTCs, read a car’s data stream, perform actuation tests and more.

The Launch X431 Pro III has been designed to connect vehicles and workshops, with wire-less and bluetooth connectivity. A built-in social network service enables users to connect to a community for help with diagnosis, while remote diagnosis is possible with golo option. Users also have access to a car database and repair tips, allowing for faster and more efficient perfor-mance.

Other features of the Pro 3 include:

•Full system diagnosis•Data stream storage and re-display•Coding, reset and programming functions•Online technical support and advice•Real time diagnosis for golo users•Special functions for specific manufacturers

X431 Pro III Technical Specifications:

•10.1 inch, 1280x800 resolution touch screen•Quad core processor running at 1.2Ghz.•1 GB of RAM•8 GB on board storage.•16 core GPU•3.7v ultra-long battery 6600 mAh.•0.3 megapixel front camera, 3.2 megapixel rear camera•Android 4.0 OS

Our Part No: X431.COMP05

Supply and Support in the UK only

24

DIAGNOSTIC & TEST EQUIPMENT

LAUNCH X431 EURO PAD II

DIAGNOSTIC TABLETSupply and Support in the UK only

The X431 Euro Pad II - the latest android based diagnostic tool from Launch!

Boasting a robust, IP65 water, drop and dust resistant design that puts user intuitiveness above all else, the latest merge of vehicle diagnostics and tablet computing makes use of a revolutionary 10.1 inch, ultra-high resolution IPS touch screen with 150° viewing angle.

Key Features:

• VIN recognition and Auto-ID available on vehicle systems and modules• View/Record upto 15 live data items at the same time.• Real-time remote telematics diagnosis using GOLO.• Customer management software linking to the LAUNCH online user community.• Online fault code search and manufacturer possible causes and solutions help files.• Built-in Vehicle Maintenance and Repair Database.• Easy ‘one-click’ updates over Wi-Fi.• Class-1 Bluetooth 2.1 connector for optimum wireless connectivity.• 10.1” High resolution IPS capacitive touch screen.• 2MP frnt camera and 5MP rear camera with flash and video function.• Optional thermal Wi-Fi printer available and office Wi-Fi printer connectivity.• One year software subscription included no lock out period.• Pre2000 OBD1 and historic cables and connectors.• High resolution camera with still and video capabilities.

Using the same award winning car diagnostic software as the previous Launc h X431 scan tools, the Euro Pad II once again features vast multi manufacturer vehicle coverage, powerful special functions, accurate and ultra-fast live data and graphing, along with module coding capacities.

With an open Android™ operating system to give you a true tablet experience, you can install third party apps and software to your X431 Euro Pad II to fit your particular diagnostic needs.

Launch the generation software suite, including OE-level access to Asian, European and Domestic applications for module coding, resets, relearns and bi-directional capabilities. The Pad II also supports the use of Launch extension modules such as Multimeter Scope Box, 4 Channel Oscilloscope, Sensor Simulator and Endoscope Inspection camera as optional extras.

Special Functions:

• Injector Coding• Key Coding• DPF regenerations• Service light rests• EPB release• SRS crash data clear• ECU configurations• Resetting learnt values • Clearing transmission adaptations • Clutch alignments• Clutch re-learning...and many more! Our Part No: X431.COMP06

25

DIAGNOSTIC & TEST EQUIPMENT X-431 Accessories

Carry Case Part No. X431.BOXCF Card Reader/Writer Part No. X431.CDRWLeather Cover Part No. X431.COVLighter Socket Power Cable Part No. X431.LC01User's Manual on CD Part No. X431.MANCDClip-On Cable (Crocodile Clips) Part No. X431.CC01Main Data Cable Part No. X431.MC01Data Cable Extension Part No. X431.MCEXTPrinter Rolls Part No. X431.PRMCAN-BUS Connector Part No. X431.CAN01Volvo CAN-BUS Connector Part No. X431.CAN02CAN2 Combined (All Veicles Including Volvo) Connector Part No. X431.CAN03Launch Super 16 Connector Part No. X431.CAN04Audi 4 Connector Part No. X431.CAU4BMW 16-pin Connector Part No. X431.CBM16BMW 20-pin Connector Part No. X431.CBM20Chrysler 6-pin Connector Part No. X431.CCH6Fiat 3-pin Connector Part No. X431.CFI3Ford 6+1 Connector Part No. X431.CFO61GM/Daewoo 12-pin Connector Part No. X431.CGMD12AHonda 3-pin Connector Part No. X431.CHO3Kia 20-pin Connector Part No. X431.CKI20Mazda 17-pin Connector Part No. X431.CMA17Mercedes Benz 38-pin Connector Part No. X431.CMB38Mercedes 38-pin Connector for Extension Cable Part No. X431.CMB38EV Class & Transporter Connector Part No. X431.CMBVMitsubishi/Hyundai 12+16 Connector Part No. X431.CMHNissan 14+16 Connector Part No. X431.CNISmart OBDII 16 Connector Part No. X431.COBD16OBDII - 16C Connector Part No. X431.COBDCANOpel 10-pin Connector Part No. X431.COP10Toyota 17-pin Commector Part No. X431.CTO17Toyota 17-pin F Connector Part No. X431.CTO17FUniversal 3-pin Connector Part No. X431.CUN3Volvo CAN-BUS Connector Part No. X431.CVCEOBD Code Breaker Book Part No. X431.MAN01Service Reset Book Part No. X431.MAN02Diagnostic Plug Locator Book Part No. X431.MAN03

Supply and Support in the UK only

26

DIAGNOSTIC & TEST EQUIPMENT Super Deluxe Domestic Scanner Set

Part No. TOOL.60

The Scanner allows the technician to access a vehicle's onboard computer system. The scanner can also be used to record data during a test drive on some vehicles to better isolate a problem. It can also monitor sensors and engine operating conditions.

Cartridges for Super Deluxe Domestic Scanner Set

Part No. TOOL.61-67

Domestic USA 2000 Up Part No. TOOL.61Opel Primery German Part No. TOOL.62Primary Renault German Part No. TOOL.63Ford Primary German Part No. TOOL.64Mercedes Primary German Part No. TOOL.65BMW Primary German Part No. TOOL.66VAG Primary German Part No. TOOL.67

Universal Diagnostic Connector Kit

Part No. CABLE.TOOL03

A selection of connectors and test probes for use with various diagnostic tools.

An essential piece of equipment for any diagnostician to compliment the standard test probes on any Diagnostic Scope, DMM Meter or Power Tester.

KES-200 Portable Engine Analyser

Part No. TOOL.74

Kes-200 is a handheld engine analyser that can test both DIS and distributor engine with many state-of-the-art concepts and technology. It greatly help you to find out any problem in ignition, stating &charging and fuel injection system, as well as various sensors of the vehicle. Therefore make you an expert in garage immediately. Its real time 4-channel oscilloscope, digital multi-meter, easy to use software, build-in library of standard waveform, PC/Print link ports and upgradeable program card all result you with a professional job.

27

DIAGNOSTIC & TEST EQUIPMENT Sensor Monitor

The Sensor Monitor not only gives you the ability to test 2 Wire Inductive and 3 Wire Hall Effect sensors, it is also able to test the latest 2 wire Active Hall Effect sensors.

The Sensor monitor features an L.E.D barograph display and buzzer to alert the operator to any problems.

The New Integrated Circuitry gives the unit increased accuracy with a response time of 20ms.

The unit has a scope out port allowing you to connect directly to an oscilloscope to monitor wave forms.Along with transmission sensors, the sensor monitor is also able to check other sensors throughout the vehicle including ABS, Engine and More...

Features:

• Ergonomic Handheld Grip• Scratch Resistant Surface• Rugged Construction• Oscilloscope Output• L.E.D Bar Graph• Audio Buzzer• Easy to use colour coded connections• Frequency Select Mode• Standard 12 Month Warranty.

Part No. TOOL.216

Vacuum testing is an efficient way to evaluate valve and valve body wear.A worn valve or valve body bore can result in incorrect pressures in the transmission, which may lead to poor performance or failure of the transmission. In order to determine if a valve/bore is worn, or to make sure a valve repair has been performed correctly, the proper vacuum testing equipment is required. Sonnax offers the vacuum test stand kit, to help fill this need. Whether you are diagnosing a problem valve body or verifying your remanufacturing process, the Sonnax vacuum test stand kit will be an invaluable tool.

Features & Benefits• Quick, easy testing of valve bores• Yields repeatable numerical results for comparison and documentation• Anodized finish will stand up to years of use• High-quality brass needle valves for easy calibration• Built-in test orifice for easy calibration.• Clear Sonnax test plate makes it easy to see where you are testing

Sonnax Vacuum Test Stand Kit

Part No. TOOL.220

Click here for full product description

Spare set of testing tipsPart No. TOOL.227

28

DIAGNOSTIC & TEST EQUIPMENT

ACTECMAX 3CFM VACUUM PUMPFor use with TOOL.220

• Combines advanced technology with dependable performance• Lightweight, Durable Construction for Easy Handling and Long-

Life Use.• Tested-Proven-Reliable.• Ultimate vacuum rating 10PA.• Fitting Size - 1/4 in. SAE• Motor - 1/4 HP• RPM - 1440• Weight 7.9kg

Part No. TOOL.226

Sonnax Wet Air Test Plate Kit

Part No. TOOL.09

Benefits:• This Wet Air Test Plate can be used to pressure-test circuits• Can also be used to identify sticking valves,leaking end plugs or worn

bores• Test plate can be used on a wide variety of transmissions• Clear see-through design allows easier circuit testing• Pad included to ensure clean, thorough seal for accurate testing

Pack of 5 Replacement Vacuum Test Sealing PadsPart No. TOOL.98

Sonnax Replacement Vacuum Test Foam Pad

Sonnax vacuum test foam pad VACTEST-PAD replaces worn or contaminated test pads, restoring proper sealing for successful vacuum testing.

Part No. TOOL.99

RD-1 SERIES ROTARY VACUUM PUMP For use with TOOL.220

Alternative to TOOL.266 shown above

Part No. TOOL.233

29

DIAGNOSTIC & TEST EQUIPMENT Transmission Fluid Filler Pump 7.5 Ltrs + 8 Adaptors

Part No. TOOL.204

The tool consists of a 7.5 litre fluid pump and a set of 8 adaptors for the following applications:1. Ford 1/8 NPT2. Universal (BMW, Honda, Nissan)3. VW/Audi (Short Adaptor)4. VW/Audi, Porsche (Long Adaptor)5. VW/Audi, Mini Cooper6. Mercedes 722.97. VW/Audi DSG8. VW/Audi CVT