development tendency of carbon fiber in china

. Current situation and

development tendency of carbon

fiber in China

2014.10

Jilin Tangu Carbon Fiber Co. Ltd.

Current situation and development tendency

of carbon fiber industry in China

Introduction of China carbon valley company.

The contents of the report


Since 2010, the global carbon fiber market showed signs of recovery, the quantity

demand of carbon fiber is gradually increasing, in addition to the traditional aerospace,

sports and leisure areas, the new carbon fiber market, such as wind turbine blade and

pressure vessel is booming , the future of carbon fiber Market Outlook is optimistic. At

present, the global carbon fiber companies have announced expansion plans.

0

100

200

300

400

500

600

700

800

2008 2009 2010 2011 2012 2013 2014 2015 2016 2017

Thermoplastic/Electronic products

Transportation、

water traffic

Industry

Inner

structure/Archite

ctureAutomobile

Offshore oil field

Wind and other

energy

Sport goods

飞机及航天器

Jilin Tangu Carbon Fiber Co. Ltd. Current situation and

development tendency of

carbon fiber industry in China

1、The china carbon fiber industry ：Limited by technical bottlenecks,

high-end products still need breakthrough

In the current carbon fiber industry, only a small number of carbon

fiber factory has core technology of carbon fiber production, including

several steps of PAN precursor production such as polymerization,

spinning, stretching, and low temperature carbonization, high

temperature in carbonization process.

At present Chinese carbon fiber industry mainly concentrate in the

synthetic materials and end products, only a few enterprises engaged in

precursor and carbon fiber materials production, and which quality

reached the T300 level of Japan.


2、Chinas demand ：The average annual growth rate will reach 18.41%

Imported carbon fiber market situation of china

2010-2013 Statistics of imported carbon fiber

Import（ton） 2010year 2011year 2012year 2013year Percentage

%

Year

over

year %

Total 10966.0 10725.0 8560.2 12386.2 34.5%

General trade 2942.0 2947.3 2486.8 4303.1 34.7 65.7%

Processing trade 7813.0 7294.5 5799.0 7511.4 60.6 19.7%

Among

them

Processing

supplied 603.6 458.2 294.7 334.3 2.7 11.2%

Processing

imported 7209.4 6836.3 5504.3 7177.1 57.9 20.1%

Carbon fiber and product imports increased by 34.5% year-on-year in 2013, Analysis

of the reasons is China carbon fiber Market recovering, increased demand for carbon

fiber, domestic carbon fiber quality and quantity improving at fast, part of them has

replaced the imported products. That substitution relationship can be seen from the

reduction of the processing trade.

Current situation and





Application area table of China carbon fiber

Aerospace and

aviation Aerospace is mature, aviation start-up

Aviation Poor performance, applied to non load bearing structure

Aerospace Application in rocket and missile is mature

Industrial In the research, and beginning stage

wind turbine

blades

The, Research and develop application of carbon fiber in small

leaf and 3MW above the blade

Sucker rod Production and application of small batch

The cable

conductor core

Have solved technical problems, a few enterprises can produce

on large scale

Sports and leisure Usage is the largest, and industrial production

Golf processed 1546.6 tons in 2011 years, ranking first in the

application

Fishing rod Production and international market share in the world's leading

Racket for ball In 2011 years the use of 963.8 tons of carbon fiber, The total

import volume of 9%





According to the data statistics, carbon fiber consumption demand

growth rate in 2010-2014 has been maintaining at about 18%. At present,

the carbon fiber consumption market in china sports leisure products

have become saturated, Many products mainly enter the international

market, the development speed will slow down somewhat in the future,

The average annual growth rate is expected to about 4.6% in 2010-2015

years. The important and potential Application market of carbon fiber

industry in china is concrete structure reinforcement, aircraft

manufacturing, civilian vehicles and wind power, the future market have

good prospects for the development, is expected to average annual

growth rate of 53.4%.

It is expected that by 2015, domestic carbon fiber quantity of total

demand will reach 13500 tons / year, the next few years carbon fiber

market will have a rapid expansion trend, and average annual growth rate

will reach 18.41%.






Shanghai Jinshan

petrochemical,

Fudan University, Donghua

University, Shanghai Textile

Institute

Anhui Song Wen, Xin Feng

Ningbo Jinggong new

materials Zhejiang Taixian

Hebei Handan

Institute of coal

chemistry, Heng

Tian

At present, the manufacturers of carbon fiber distribution in china

Inner Mongolia

Xinya

Jilin petrochemical,

Sinosteel Jilin Carbon Tangu,

Jilin, Jiyan technology ,

Changchun University of

Technology

Shenyang Zhongheng, Dalian

xingke

Weihai development,

Shandong University

Zhongfu Shenying, Jiangsu

Hengshen, Jiangsu day birds,

polyester, the CAS Yangzhou

Huitong base,

Zhongjiantechnology,

Zhenjiang Airlines

Guangdong Jinfa

Xian kanben

Henan

Yongcheng Coal China

bluestar、

Haoshi

Carbon Fiber

Beijing

University of

Chemical

Technology

http://louise12.bokee.com/viewdiary.13210442.html


3、The expansion of production capacity in china：

Self-sufficiency rate is less than 30%

China carbon fiber production capacity（end of 2014year）

Enterprise name Precursor production

capacity（ton/year）

carbon fiber

production capacity（ton/year）

Zhongfu Shenying Carbon Fiber Co., Ltd. 5500 2200 Jiangsu Hengshen fiber materials Co., Ltd. 3500 3200 Weihai Tuozhan Fiber Co Ltd 2880 1150 Shenyang Zhongheng New Material Co., Ltd. 1000 500 Sinosteel Jilin carbon Co., Ltd. 0 500

Zhejiang Juxin Carbon Fiber Co., Ltd. 0 300

Dalian Xingke Carbon Fiber Co., Ltd. 0 180 PetroChina Jilin Petrochemical Co 260 115 Henan Yong coal Fiber Co. Ltd. 1200 600 Gansu Haoshi Carbon Fiber Co., Ltd. 0 260 Zhongjian Technology 130 50 The Chinese Academy of Sciences, Shanxi Institute of

Coal Chemistry 60 20

Xi'an Kang ben material limited company 50 20

Anhui xinfeng 0 30 Jilin tangu Carbon Fiber Co., Ltd 5000 0 Yangzhou Huitong polyester Technology Co., Ltd. 125 0 Shanxi Hengtian Fiber Co. Ltd. 1200 0

Others 25 10

Total 20930 9135





3、The expansion of production capacity in china： Self-sufficiency rate is less than 30%

Only from the production aspects, china carbon fiber

production can satisfy the basic demand, but because of carbon fiber

products mostly are low-end products, it is difficult to meet the

performance requirements of the downstream, and the majority of

domestic manufacturers production are instability, far less than the

actual production capacity. The actual 2010 domestic carbon fiber

yield less than 2000 tons, self-sufficiency rate is less than 30%, so the

domestic carbon fiber demand gap is still large.





4、In future years--Chinese four industry will drive the carbon fiber

market to strong growth

The big aircraft project --In the era of high oil prices, carbon fiber

composite material of light structure, low repair cost advantage

will greatly impact the situation of aluminum bearing load

structure dominated . The design of new aircraft are increasingly

using





Off shore wind power——China is planning a massive buildup in

water wind power station in about 30 miles distance from the coast

.the power station would be built on the huge floating body, and may

also on the continental shelf under water 120 feet deep. In view of the

wind over sea is usually stronger than the ground, so the offshore

wind power is more development prospects.







The Lightweight automobile is a mandatory advance to energy saving,

emission reduction, weight reduction of automobile. At present, with the decline in

the price of carbon fiber, The more and more automobile parts are beginning to

use carbon fiber as reinforced composite material.







The high-speed railway field --"Carbon fiber" will play a decisive role

in the high-speed railway field, which makes the amount of carbon

fiber Chinese continued "high temperature".







Jilin Tangu Carbon Fiber Co., Ltd was founded in December 24,

2008, Covers an area of 2.86 hectares, with registered capital of 3.6 billion

yuan, existing staff of 222 people. and is the wholly owned subsidiary of

Jilin Qifeng Chemical Fiber Co. Ltd. Tangu company rely on Asia's largest

acrylic fiber production enterprises, with the Changchun University

Technology self-developed the DMAC wet two step method production

technology of PAN based carbon fiber .

Introduction of China carbon valley

company


self-developed the ternary water-phase suspension polymerization Domestic initiative

Jilin Tangu Carbon Fiber Co., 5000 tons of carbon fiber precursor,

project use self-developed the ternary water-phase suspension

polymerization wet two-step method to produce carbon fiber precursor

. The process is unique in China and has the advantage of shorter

production process. stable quality and higher capacity cost low.

product of the indicators have reached the T400 level of Japanese

Toray company. Now the company is mainly engaged in the production

and sale of 1K. 3K. 6K. 12K. 24K and 48K PAN-based carbon fiber

precursor. we are continuously optimizing the process and modifying

equipment, and strive to reach standard T700 level in the shortest

possible time. During the 12th Five Year Plan period, carbon Valley

company production will reach 10000 tons per year of carbon fiber

precursor. And produce precursor in low cost, large tow, civilian way.

Introduction of China carbon valley

company


At present carbon fiber main products in are 1K, 3K, 6K, 12K small tow, there

are some problem existing such as high costs, insufficient capacity to

release ，lack mass production for large tow .

At present because of high shaping costs for carbon fiber composite

materials, Restricting its large-scale application in industrial field.

It is urgent problem To promote the development of china composite material

industry, that realizing industrialization of low cost large tow (48K) carbon

fiber, and the breakthrough for low cost rapid shaping technology of carbon

fiber composite material

The main problems of the development of carbon fiber in China


Based on Low cost and quality advantages of carbon Valley

company products, as well as supply demand status and trend between

domestic precursor and downstream industry (low cost, high

performance, high quality precursor is the hot of market demand),

carbon Valley company respectively cooperate with Jinggong group,

Changchun University of Technology, Beijing University of Chemical

Technology, Changan automobile, FAW Group Carbon in the

development of automobile covering parts and structural parts. and

jointly develop carbon fiber cable core with Anhui Shou wen carbon

fiber company. Carbon Valley company product targets efforts to

expand the international market on a solid foundation for the domestic

precursor market. we sincerely look forward to technical exchange and

cooperate in all aspects with foreign carbon fiber enterprise and the

common develop carbon fiber market.


Thank you for experts ！

Contacts ：Zhuang hai lin

Telephone：+86 139 446 486 66

development tendency of carbon fiber in china

Documents