details for gfrc cladding panels - stromberg architectural prods

Details for GFRC Cladding Panels


The following details are a guide to GFRC cladding. They are intended as a

general guide only and since each project is unique, the exact details will vary

from project to project.

s t r o m b e r g a r c h i t e c t u r a l p r o d u c t s4400 oneal street • greenville, tx • [email protected] • www.4stromberg.com

DTL10

DTL7 DTL8

DTL9

DTL11 DTL12

DTL10

DTL7 DTL8

DTL9

DTL11 DTL12

DTL3

DTL2

DTL4

DTL5 DTL6

DTL1

PEEL ANDSTICK MEMBRANE

NOTE: FLEX ANCHORS OMITED FOR CLARITY


DTL3

DTL2

DTL4

DTL5 DTL6

DTL1





s t r o m b e r g a r c h i t e c t u r a l p r o d u c t s4400 oneal street • greenville, tx • 903.454.0904

[email protected] • www.4stromberg.com

DTL2

GFRC Window Detail

The window should bear on the metal stud frame, not on the GFRC. Allow room in the design for

shims and blocking.

A peel and stick or metal flashing should be included in the design.

To download CAD drawing of this detail go to the CAD file section of the web-site.

DTL3

DTL2

DTL4

DTL5 DTL6

DTL1







DTL4

GFRC Cladding Panels - Parapet Detail

Typical details for GFRC cladding panels. Parapet can be capped with a metal flashing cap or the

GFRC can wrap the top of the parapet. When the GFRC wraps the parapet cap, the detail should

include a metal membrane or other water barrier.

DTL3

DTL2

DTL4

DTL5 DTL6

DTL1







DTL5

GFRC Cladding Panel: Ground Level Detail

Panels may set directly on the slab or on a shelf. Allow room for shims to account for variations in

the foundation.

DTL3

DTL2

DTL4

DTL5 DTL6

DTL1







DTL6

GFRC Cladding Panel: Reveal

A reveal in GFRC cladding panel. The main use of reveals is to create shadow lines and demarcate

the buildings cladding. Reveals are also referred to as a demarcation, rustication or false point.

DTL3

DTL2

DTL4

DTL5 DTL6

DTL1







DTL7

Profiles and Projections on GFRC Panels

• BullnoseprofilesandprojectioninGFRCpanescanvaryinsize,shapeandprojection.

• Shapesmaybevertical,horizontal,curvedoranycombinationofthese.

• ProjectionsinGFRCpanelscanexpresstheplanningmoduleorstructuralrhythm.

• ProjectionsinGFRCcladdingcanbeusedwheretherearechangesincolorortextureofa

GFRC panel.

• Projectionscanbeusedtoprovidedripsinordertoprotectopeningsorcontrolwaterflowon

GFRC cladding panels.

• Changethebuilding’svisualscale.

• ProjectionsinGFRCpanelscanemphasizefloorlines,rooflinesorceilinglines.

Questions?

Call us we are here to help.




DTL7

Profiles and Projections on GFRC Panels

DTL10

DTL7 DTL8

DTL9

DTL11 DTL12




DTL8

GFRC Panels: Corner Details

A corner can be either a return, the depth of the panel or a “quirk” miter. “L” shaped panel returns

are possible but can create difficulties with shipping and handling

DTL10

DTL7 DTL8

DTL9

DTL11 DTL12




DTL9

BrickTextureonGFRCPanels

StrombergGFRCCladdingPanelswithbrickpatternareavailableinvirtuallyanycolorortexture.

DTL10

DTL7 DTL8

DTL9

DTL11 DTL12




DTL10

Brick“Infill”PanelsinGFRC

Panels with brick pattern and a smooth perimeter frame. Perimeter can be cast with false joints to

simulate a cast stone, cut stone or architectural precast band.

DTL10

DTL7 DTL8

DTL9

DTL11 DTL12




DTL11

GFRC“Brick”PanelCornerReturn

ThisdetaildrawingillustratesonemethodforcreatingabrickcornerreturninGFRC.SeeDTL

12 and 13 for other options.DTL10

DTL7 DTL8

DTL9

DTL11 DTL12




DTL12

Thisdetaildrawingillustratesaperimetersmoothband“brick”GFRCpanelcorner.SeeDTL11

and 13 for other options.

DTL10

DTL7 DTL8

DTL9

DTL11 DTL12




DTL14

BrickTextureGFRCPanel

IllustrationofabricktextureGFRCpanelwithasmoothperimeterband.

DTL13

DTL14

details for gfrc cladding panels - stromberg architectural prods

Documents