desmi mobile fire and emergency bilge pumps
TRANSCRIPT
7/24/2019 DESMI Mobile Fire and Emergency Bilge Pumps
http://slidepdf.com/reader/full/desmi-mobile-fire-and-emergency-bilge-pumps 1/2
Mobile Fire & Emergency Bilge Pumps
Approved by Danish Maritime Authority
For more information on Marine & Offshore solutions, please visit www.desmi.com
DEFENCE & FUELOIL SPILL RESPONSEINDUSTRY UTILITYMARINE & OFFSHORE
Capacity curves formobile fire pumps
38 0 36 0 65,8 0
35 8 32,5 11 64,8 10
30 17,5 30 16,7 61,3 20
26 22,5 27,5 25,8 50,8 30
17,5 30 21 35,3 39,2 40
11 46 25,4 50
55,1 13,3
62,4 2,6
0
10
20
30
40
50
60
70
0 10 20 30 40 50 60 70
mlc
m3 /h
S70-50-175/A11
SA50T/1B30
SA50T/1B20
SA50T
Engine sizes:
Type 1B20, 3.4 kW at 3600 rpm
Type 1B30, 5.0 kW at 3600 rpm
Capacity: 24 m3 /h x 26 mLC.
S70-50-175/A11 for quick primingCapacity: 20-50 m3 /h x 55-20 mLC.
7/24/2019 DESMI Mobile Fire and Emergency Bilge Pumps
http://slidepdf.com/reader/full/desmi-mobile-fire-and-emergency-bilge-pumps 2/2
PROVEN TECHNOLOGY
Mobile Fire & Emergency Bilge Pumps
SA50T Super is equipped with a special star wheel
which s placed behind the impeller. This solution
ensures quick and safe priming. The priming time
at 4 metres suction head and 2” suction hose is ap-
prox. 20 seconds.
All SA50T pumps are available in a watertight
aluminium box complete with suction and pressure
hoses.
DESMI has an extensive product range of mobile
and stationary diesel-driven pump units. These
pump units are made to comply with the demands
of the marine industry as regards materials, design,
and ease of handling.
All DESMI’s mobile pumps are in compliance with
the Danish Maritime Authority’s requirements for
portable emergency fire pumps in fishing and
cargo vessels together with P-vessels.
SA50T is a mobile emergency fire and bilge pump
which weighs as low as 50 kg. This lightweight
pump is specially designed for easy handling on
board vessels.
The construction is based on the well-known
DESMI SA pump series. The pump casing is made
of seawater resistant aluminium and the impeller
of stainless steel. The pump is close coupled to a
new-developed lightweight hand start Hatz diesel
engine. Electric start is available as an option.
The pump unit is mounted in a stable carrying
frame. The flanges of the pump are equipped with
Storz C-2” couplings for quick and safe connection
of the hoses. The low weight of the unit and thestable frame make it possible to move the pump
around.
Type Wet Dry
SA50T/Hatz 1B20, Recoil start 57 kg 50 kg
SA50T/Hatz 1B20, Electric & recoil start 65 kg 58 kg
SA50T/Hatz 1B30, Recoil start 69 kg 55 kg
SA50T/Hatz 1B30, Electric & recoil start 72 kg 63 kg
SA50T/Super 1B30, Recoil start 69 kg 55 kg
SA50T/Super 1B30, Electric & recoil start 72 kg 83 kg
S70-50-175/A11 for quick priming
DESMI MODULAR-S Super-primer is the right solu-tion when quick priming is required.
The priming ability of the pump is up to 12,000litres of air per hour, dependent on suction lift.This very fast priming is achieved by a combination
of the diffuser principle and the liguid ring principlewhere a star wheel from the liquid ring pump ismounted on the same shaft as the impeller.
The unit is mounted on a stable carrying framewith carrying handles. The pump is driven by a2-cyl., 4-stroke Lombardini diesel engine of 12 kWwith hand and electric start.
The pump is equipped with 2½” suction and 2”pressure branches for quick and safe connectionof the hoses.
Type Wet Dry
S70-50-175/A11/Lombardini Electric &recoil start
155 kg 140 kg