deski takie sekate - catalog en

Photos

Description

DeskiTakieSekate.pl | © All rights reserved

Wooden clipboard -

engraving on the front side

A wooden clipboard is the most popular among training companies and conference organizers,restaurants (as a hardcover for the menu), coaches, sales representatives and speakers.

Our clipboard is made of birch plywood (3 mm thick). I t is a 1 00% eco-friendly product, that’s why it is so popular

among companies which build their eco-friendly image.

We offer cl ipboards in 3 sizes which can be finished in 4 different ways. The engraving area is on the front side of

the board, under the sheets of paper.

Finishing Sizes

1 25x1 91 mm

1 68x253 mm

230x340 mmA4

A5

A6

onlysanding

colourlessvarnish

stain + varnish(brown)

stain + varnish(mahogany)

Photos

Description


Wooden clipboard -

engraving on the backside

A wooden clipboard is the most popular among training companies and conference organizers,restaurants (as a hardcover for the menu), coaches, sales representatives and speakers.

Wood is sti l l considered to be smart and prestigious material , that’s why wooden products are excellent at

building the image of a rel iable, experienced and long-established company.

We offer cl ipboards in 3 sizes which can be finished in 4 different ways. The engraving area is on the back side of

the board.

1 25x1 68 mm

1 68x230 mm

230x31 7 mmA4

A5

A6

Finishing

onlysanding

colourlessvarnish



Sizes

Photos

Description


Wooden clipboard

with a cover

A wooden clipboard is a product dedicated to training companies and conference organizers, restaurants(as a hardcover for the menu), coaches, sales representatives and speakers.

We can engrave any content or image on the board (usually it is the logo of the company). The engraving area

(20 cm2) is on the front side on the clipboard (larger engravings are available at a supplement). On the other side

of the cover there is a pocket for additional documents.

Wood is sti l l considered to be smart and prestigious material and wooden products are solid and can be used for

a long time. Wooden clipboard with engraving logotype is excellent at building the image of a rel iable,

experienced, long-established and eco-friendly company.

1 45x1 68 mm

1 68x230 mm

230x31 7 mmA4

A5

A6

Finishing

onlysanding

colourlessvarnish



Sizes

Photos

Description


Wooden clipboard –

no engraving

A wooden clipboard is a product dedicated to training companies and conference organizers, restaurants(as a hardcover for the menu), coaches, sales representatives and speakers.

I t is a 1 00% eco-friendly product, that’s why it is so popular among companies which build their eco-friendly

image. Moreover, wooden products are considered to be smart and prestigious.

Our cl ipboard is made of birch plywood (3 mm thick). We offer cl ipboards in 3 sizes which can be finished in

4 different ways.

1 25x1 68 mm

1 68x230 mm

230x31 7 mmA4

A5

A6

Finishing

onlysanding

colourlessvarnish



Sizes

Photos

Description


Wooden diploma

cover

A wooden cover is the perfect binding for elegant diplomas handed out to Very Important People.Perfectly matches diplomas and certificates printed out on exclusive paper (for instance, on handmadepaper).

Such covers are chosen by the companies and organizations which pay attention to the prestige during the

ceremonies of awarding special honours and acknowledgments. Choosing such a natural material as wood also

proves that "sustainable development" and "environmental responsibi l ity" are not just empty phrases but an

actual mission of the company.

The cover is made of birch plywood with a thickness of 3 mm. The price of the product includes marking by the

laser engraving method on the surface of 1 50x75 mm.

230x31 7 mmA4

Finishing

onlysanding

colourlessvarnish



Sizes

Photos

Description


Wooden menu

cover

Wooden cover is the perfect binding for the menu in restaurants for whom the most important values aretradition, good taste and cooking with only natural products.

Wood goes perfectly with the "rough" interior design, for instance in taverns, inns and roadhouses. A cover made

of this material perfectly highl ights the natural character of dishes served in this place.

The cover is made of birch plywood with a thickness of 3 mm. The basic price of the product includes marking by

the laser engraving method on the surface of 1 50x75 mm. Menu cards are attached to the cover using two

screws with the cards punched, put in plastic sleeves or passe-partout frames; the size of covering boards wil l be

adapted to your needs.

21 5x305 mmA4

Finishing

onlysanding

colourlessvarnish



Sizes

Photos

Description


Wooden portfolio

cover

An attractive and distinctive portfolio is the “to be or not to be” in the design or creative industries.

I t is impossible to be indifferent to a portfol io bound in a wooden cover: simply because of the type and quality of

material , your prospective cl ient wil l rather put your offer aside than immediately throw it into the waste bin. The

final effect is completed with the marking by laser engraving which allows us to accurately reproduce even

complex graphics.

The cards are attached inside the cover using two screws. The basic dimension houses an A4 paper format, but

we may also tai lor it to your custom sheets.

302x21 8 mmA4

Finishing

onlysanding

colourlessvarnish



Sizes

Photos

Description


Notebook covered

in wood

Notebook is a classic in advertising gadgets, but bound in an original and elegant wooden cover itbecomes a prestigious gift for the company’s contractors and clients.

The cover may be engraved with any text or graphics - this is usually the company’s logo on the front, but without

any problem one may put in extra content on other pages. Notebook pages are made of creamy white paper 80

gsm. Conventional ly, they are smooth, but our more demanding cl ients are offered printing their logo on every

page.

Our notebooks are produced in 3 standard sizes, opening horizontal ly or vertical ly, holding 50 or 1 00 sheets.

They may be additional ly equipped with a pen grip or elastic closure.

1 25x1 68 mm

1 68x230 mm

230x31 7 mmA4

A5

A6

Finishing

onlysanding

colourlessvarnish



Sizes

Photos

Description


Wooden binder

Wooden binders are elegant, yet still rarely seen marketing tools. They may serve as the company'scatalogue, a conference folder or a cover for training materials.

A wooden binder may also house all kinds of materials used by sales representatives, including information

materials, product cards or sample books. The laser engraving technique used for marking our products al lows

you to personalize them in any number of copies.

The binders are produced in two basic formats (A4 and A5) and 3 thicknesses (holding 20, 50 and 1 00 pages).

For bigger numbers of copies we may adjust the dimensions, plywood finish and veneer colour to the customer's

requirements.

1 95x230 mm

275x31 7 mmA4

A5

Finishing

onlysanding

colourlessvarnish



Sizes

Photos

Description


Wooden flyer stand –

model 1

A wooden flyer stand is an offer for those clients who, for any reason, are not satisfied with popularplastic display stands.

Apart from the classic and elegant appearance, an important advantage of plywood stands is the possibi l ity of

customized marking, usually with the logo or another important marketing message. Due to the nature of the

material , we recommend these stands above all to such clients for whom environment protection and sustainable

development are important elements of the company’s mission or image.

Standard stands dimensions are suitable for the most popular formats of flyers (A5, A6, DL), but we are able to

adapt to cl ient's special requirements.

1 1 5x1 45 mm

1 60x21 0 mm

11 0x21 0 mmDL

A5

A6

Finishing

onlysanding

colourlessvarnish

Sizes

Photos

Description


Wooden flyer stand –

model 2

Wooden flyer stand is the offer for the companies that are looking for an unusual alternative to commonplexiglass display stands.

Despite its simple design, this model perfectly serves as a flyer holder with its classic and natural look. I ts

advantage is the possibi l ity of marking by laser engraving: usually with the company logo or a call for action such

as "take a leaflet" etc.

Standard stands dimensions are suitable for the most popular formats of flyers (A5, A6, DL), but we are able to

adapt to other, less common sizes.

1 1 5x1 95 mm

1 58x255 mm

1 09x255 mmDL

A5

A6

Finishing

onlysanding

colourlessvarnish



Sizes

Photos

Description


Wooden

desk cube holder

A pile of small paper sheets for short notes is an indispensable element in any office. So why not use itas an additional advertising medium for your company?

The holder is made of 3 mm thick plywood - raw (sanded) or varnished. The front of the container may be marked

with any text or graphics. The laser engraving technique allows for reproduction of the most complex designs and

personalization of any number of copies.

The cube consists of ca. 500 sheets, not glued together, in the size 85x85 mm, made of creamy white paper 80

gsm. For our most demanding cl ients, every card may be printed with their logo, contact detai ls or other important

information.

85x85x85 mmS

Finishing

onlysanding

colourlessvarnish

Sizes

deski takie sekate - catalog en

Documents

covera wooden clipboard

engravinga wooden clipboard

backsidea wooden clipboard

wooden products

training companies

conference organizers

clipboard larger engravings

sales representatives