designed with snap fit “v” ring bag seal to prevent by …harmsco.com/pdf/housings/hl 100901 hsb...
TRANSCRIPT
HARMSCO®
HSB Single Bag Housings
HARMSCO® Filtration Products
Industrial Grade
HSB Series Bag Housings are designed for a variety of industrial filtration applications where clean effluent is critical. Manufactured to ASME design standards for durability and long equipment life.
Applications SolventsHydraulic FluidsCutting FluidsGround Water RemediationIndustrial Waste Water Treatment
Plating SolutionsProcess Water FiltrationPaint
CoatingsLubricants
Features 304 stainless steel construction, standard150 PSI (10.3 bar) pressure rating316 stainless steel perforated basket, standardBuilt to ASME design standardsBead blast finish, standardDesigned to accept standard #1 and #2 snap fit “V” ring or steel ring bags
Easy-access eye nuts / swing boltsMultiple side and bottom outlet configurations - 2” FNPTAdjustable stainless steel tripod mounting legs
Designed with Snap Fit “V” Ring Bag Seal to prevent by-pass.
HSB-1 HSB-2
Options:ASME Code U-stampElectropolished316 stainless steel construction
Snap Fit “V” Style Filter Bag
Positive Snap Fit “V” ring seal to prevent by-pass.
Various bag options to choose from. Flow Rate (GPM)
Pre
ssu
re D
rop
(P
SI)
00 25020015010050
1
2
3
4
5
6
7
8
2” I/O
HARMSCO® Filtration ProductsP.O. Box 14066, North Palm Beach, FL 33408(561) 848-9628 • Toll-free: (800) 327-3248 • Fax: (561) 845-2474 • E-mail: [email protected]
12C 9/10
www.harmsco.com
Specifications Finish - bead blastInlet/Outlet - 2” FNPT
Temperature - up to 250°F (121°C)(filter housing only)
Pressure - up to 150 PSI (10.3 bar) max
O-ring Housing Seal - Buna (standard)
Construction - 304 stainless steel; built to ASME design standards
HSB-2HSB-1
Harmsco® HSB Single Bag Housings
Pressure DropBased on 2” inlet/outlet housing, without bag.
A
D
E
F
B
HSB-1
C
Single Bag(Topview)
Filter Model Max FlowRate* (GPM)
Max FlowRate* (LPM)
Max FlowRate* (M3/Hr)
A Filter Height
B Width
C Radius
D Inlet
E Outlet
F Leg Adjust.
I/O Size I/O Type BagSize
BasketDepth
HSB-1 90 341 20 34-3/8” 11-1/4” 6-11/16” 5-3/4” 7” 21-3/4”** 2” FNPT #1 15”
HSB-2 200 757 45 40-3/4” 11-1/4” 6-11/16” 5-3/4” 7” 21-3/4”** 2” FNPT #2 30”
Ordering Information
** Leg adjustment from 2”NPT to floor, 0 - 11 inches.
*Flow rates shown above are for guidelines only. Actual flow rates are based on bag type, micron rating, viscosity, solids content and a number of other factors. For complete flow and pressure drop information please refer to your bag manufacture guidelines.